No doubling texture heights plz
If you didn't know, apparently SRB2 was hardcoded to double the height of 64x64 textures created using TX_START/TX_END. This has frustrated some a lot. This branch removes this hack at last (there doesn't appear to be any visual issues resulting from removing it, anyway).
srb2win-nodoubletexheight.exe can be found in my FTP folder.
See merge request !85
First person HUD drown numbers fix
This branch fixes the following issues with the first person HUD when drowning:
* "0" turning into Sonic's drown sprite, since both sprites happen to be named DRWNA0
* SF_MACHINE's special drowning numbers from 3rd person not being used
See merge request !80
Basically in preperation of supporting colourblindness modes I implemented the following link when loading palettes.
http://http.developer.nvidia.com/GPUGems2/gpugems2_chapter24.html
This basically means I can do whatever the hell I want to the colour profile of incoming paletties, and nobody can stop me. Muahahahaha etc.
Also, I added a saturation feature to show off its full potential, converted gamma from a table to a factor of the calculation, tweaked some menus and made the default value of cvars show up on sliders. Because that's how I roll.
MI's unimportant code cleanup
Just removing a bunch of unused variables/function prototypes from the source code and similarly minor stuff, nothing here should change gameplay much (if at all).
See merge request !71
MI minor refactoring
Just moving the locations of some consvar externs from d_netcmd.h to other header files in which I think they should REALLY belong. Ultimately this should not affect gameplay whatsoever, it's just code cleanup.
See merge request !81
* Put brackets around the sound names on the reccomendation of a friend who works with disability in gaming.
* Update a bunch of sound names to better match what they actually do in SRB2.
* Provides a helpful description for the hearing impaired, whether permanent, temporary or situational.
* Consvar "closedcaptioning", with on/off values available.
* Only works if sounds are on. This is frustrating. I will see what I can do to allow it to work with sounds off in future, but for now it's dependent in order to properly accept or decline sounds.
* Thanks to MI for making that wiki page a lot more comprehensive a few days ago.
* Weapon ring is now a seperate sfx_wepfir instead of doubling up on sfx_thok.
* Also, made V_StringWidth work with V_NOSCALESTART.
* Made it possible to switch statistics pages using left and right arrows. Their previous functionality has been given to Page Up and Page Down.
* Swap over header style to the new version for everything.
* Move Master Server into Data Options, since it needs to be exposed somewhere.
* Show resolution on main Video page.
* Optimise by using V_RightAlignedString instead of V_DrawString with V_StringWidth.
* Revamp sliders. (Requires a new patch.dta I'll upload in a little bit in order to be perfect, but does pretty well w/o replacement graphics too.)
* Revamped base video menu and moved all the relevant stuff from the Game Options Menu onto it. Still mulling on where to put the Master Server reference.
doesn't draw off of the sides, and doesn't ignore snapping or widths for reasons that don't make sense
(for instance: the green bar in MI's test script showed *above* the blue one in non-green resolutions in 2.1.17)
Recreated my previous code using floats in case the issue was overflowing that could be mitigated using floating point precision - but still doesn't work. Pulling my hair out.
Command-line skin selecting fix
Fixed http://mb.srb2.org/showthread.php?t=42312.
Also, fixed being able to change your skin colour during credits/cutscenes in singleplayer.
See merge request !158
Revamped Level Select (platter view)
Seriously revamped every level select instance in the game to use a more attractive and easier to navigate platter view, including:
* Game CLEAR! save (Title/Pause menus)
* Secrets Menu (including custom ones)
* Record Attack/NiGHTS Mode
* Server creation (Online/2P)
* MP Pause level select (Online/2P)
As a result, the layout of the last three above menus has been changed to varying degrees of difference.
Also, bonus feature: using level select (or MAP MAPxx without -force) in Co-op multiplayer won't reset your score, will keep any lives you have above the startinglives variable, and will not take away all your emeralds. The -force thing prevents both warping directly to special stages to rack up the emeralds AND ensures there IS a way to start a new game.
Check out <root>/!LatestSRB2Files/srb2win_branch_levelselect.exe with the latest patch.dta to see more.
Also, LF2_WIDEICON lets you do this. https://gfycat.com/MenacingClearAngora
See merge request !68
Suggested default settings
Making a merge request for suggested new default settings, because saying "hey, I think this would be a better default, you guys should try it" in IRC won't actually get people to give you opinions on them ;p
Camera distance is 160 now, height is 25, and speed is 0.3 (previously 128, 20, 0.25, respectively). Mouse sensitivity on both axes is now 12, previously 35. The default move/look/jump/spin keys is Mystic's proposed scheme from the New Player Experiences topic (https://mb.srb2.org/showthread.php?t=42095).
Camera settings also now can save to your config.cfg, and they won't try resetting back to the default at every chance it gets. (~~As a side effect, analog mode won't have higher cam_dist anymore. Poor analog mode, no one cries for you.~~ Now increases cam_dist in analog mode by x1.2!) This makes it so everything that's different can be easily reverted back to the older setting.
Test exe in my folder, <root>/TehRealSalt/srb2win_changed-defaults.exe
See merge request !75
* Getting hit whilst on a swinging mace doesn't send you off in roll/jump state.
* P_GetJumpFlags replaces a bunch of copypasted code.
* Homing attacking a spring sends you directly on its path, rather than rocketing off in the direction you were preiously hurtling in.
Lets modders set how the game should be saved. Likely useless for
vanilla, but helpful for other mods. This was spawned out of selfishness
for SUGOI to make it only save at the hub, but mods like Boss Mayhem,
which has a hidden map and an act 3 (without any other acts) in the
normal SP campaign, and other mods where the default is detrimental
would benefit as well.
0 for default, 1 for always, 2 for never (no constants because bonustype
doesn't have them either). Won't save if the game is modified, if using
a no-save slot, if playing ultimate mode, or if in a special stage, even
if savemode is set to always.
Analog mode's camera is now x1.2 of your actual cam_dist setting,
instead of being strictly 192. "analog on" seems to reset this modifier
every once in a while, but "useranalog on" prevents this. The wiki
itself says that you should only change useranalog though, so it
shouldn't be too big of a deal.
Camera settings: distance from 128 to 160, height from 20 to 32, speed
from 0.25 to 0.3
Mouse sensitivity from 35 to 12
Default control setup is Mystic's proposed scheme from the New Player
Experiences topic (https://mb.srb2.org/showthread.php?t=42095)
Also, camera settings now save to config, and they no longer try to
reset back to the default at every chance it gets (you can die, start a
new game, or exit, all while still keeping your preferred setting)
* Fixed bug with the magnet shield homing attack and charability homing attack not properly updating the player's target/tracer.
* Made flashing of lockon/got flag icons slower.
* Lock on targets bob now, and are used for CA_HOMINGTHOK and SH_ATTRACT as well.
* Flag stuff is now animated like it was designed to be but which was kinda messed up.
* Cork sounds.
* P_SpawnLockOn(player_t player, mobj_t lockon, statenum_t state) for Lua.
* Added homing/firing CA2_GUNSLINGER stuff at egg guard shields.
* Fixed homing stuff wrt egg guard shields and sea egg balloons.
* Fixed attract orb goin' gold when doing a CA_HOMINGTHOK homing ability.
* Fixed positioning of player during homing attack.
* Cleaned up lockon spawn code.
*P_LookForEnemies is now side-effect-less and only provides a pointer to the found mobj
*player-jumping is dead, long live PF_STARTJUMP
*per Mystic's request, CA2_GUNSLINGER has a targeting icon. It also has a more restricted vertical aiming range.
*mobj for this is in the game as requested
*fast teetering animation flag
*general code cleanup
Simple port of something I made for a 2.1 exe mod that Mystic mentioned
needed doing on the 2.2 Priorities topic
(http://mb.srb2.org/showpost.php?p=790613&postcount=4). Adds emblem type
"map", which gives you an emblem upon beating the map it's for. Var sets
more specific conditions; 1 for all emeralds completion, 2 for Ultimate
mode completion, 3 for Perfect Bonus completion. (These can be easily
removed if requested; these were added simply because it was easy to
implement for modders.)
Criticism on the way it's coded and/or how it is implemented is highly
encouraged. Test wad is <root>/TehRealSalt/levelemblems.wad,
pre-compiled exe is <root>/TehRealSalt/levelemblems.exe.
* Swapped usage of player->spinitem to player->revitem for bullet type selection, since spinitem is used coming out of zoom tubes (which are universal).
* Switched the optional boolean for "bullet" in the Lua wrapper for P_LookForEnemies to be false by default.
* Allowed CA2_GUNSLINGER users to target Detons.
* Cleaned up some code here and there.
* CA2_MELEE/CA_TWINSPIN combination abilities (ground hit, somersalt) disabled.
* Enabled movement controls whilst using CA2_MELEE in the air.
* CA2_GUNSLINGER no longer requires charging. In exchange, it involves a cooldown in which you can't move.
* CA2_GUNSLINGER lock-on distance improved, and aiming allowance reduced to compensate.
* Lots of cleanup/gravflip allowances for homing/targeting code.
* Unrelated: Flickies now properly face the direction they're supposed to when getting knocked out of the egg capsule.
* Unrelated: Thok trail fades like spindash trail now.
* Unrelated: Using CA_HOMINGATTACK when nowhere near an enemy uncurls you.
* Mildly hacky proof of concept! Will de-hack later.
* Charge up your ability!
* You can only damage others if it's at full power.
* Fires directly at enemies/bosses when at full power. Does NOT aim at players.
* Fixed a major hack from when I SPR2ised NiGHTS by spawning in a null object.
* Made P_LookForEnemies better in preperation for the future.
* Changed some defaulting characteristics of P_GetMobjSprite2.
* Fixed CA_DOUBLEJUMP potentially counting as a float.
* Killed some extremely small boolean functions and replaced them with #defines.
Transparent patch support in TEXTURES
Adds transparent patch functionality for the TEXTURES format.
Duplicates source-to-cache column drawer functions and adds extra functionality which uses trans tables.
Changes how the column drawer is picked so it's done once per patch instead of per column.
See merge request !72
* Melee now has a proper weightiness to it with a landing frame.
* If you have twinspin too, do a somersalt when running and hitting the melee button.
* If you have melee, go into the melee landing frame when twinspinning into the ground.
* Made it so (player->availabilities & 1 << skinnum) is only true if skins[skinnum] DOES have an availability method, and always false otherwise.
* This means that setting your availabilities to INT32_MAX is no longer the equivalent of having gotten all skins.
* This means we can detect and kick cheat engine script kiddies who try to fool the server that they can use everything.
* This means availabilities of 0x00 is now valid, so make it all F's for an invalid not-in-game.
There's an outstanding issue - you can set forceskin to whatever you want to as the host. This needs to be fixed, but I'm commiting my successes first.
* PF_NIGHTSMODE is now CR_NIGHTSMODE as part of player->powers[pw_carry]. This is because it's mutually exclusive to every other "carry" type.
* PF_SUPERREADY is dead because it literally just checked for all 7 emeralds and 50 rings. That's it. You couldn't even appreciably alter its presence with Lua. That logic has been placed back in P_SuperReady.
Crumble fof
Basic (but kind of WIPish still) support for remote falling of FOFs by linedef execs or Lua. Originally started for Nev3r to use his dark magic on.
Making this MR so people actually remember I was doing something regarding crumbling FOFs, it's been months since I did stuff for this now mind...
* linedef type 446: basic setup is same as the remote shatter one (436), except the FOF of course falls down rather than shatters. By default the FOF respawns
* *No Climb*: the FOF *doesn't* respawn
* *Block Enemies*: respawning ability is determined by the FOF's flags (if it has FF_NORETURN it doesn't return, if it doesn't it does return)
* *Block Enemies + No Climb*: inverted version of above
* EV_StartCrumble for lua, format: `EV_StartCrumble(controlsec, rover, [floating?, [player, [origalpha, [crumblereturn?]]]])`
* *controlsec* is the FOF's control sector
* *rover* is the FOF itself
* (optional) *floating?* does the FOF float on water after crumbling? Defaults to false (NOTE: probably should be set to `rover.flags & FF_FLOATBOB` for best results currently, kind of weird otherwise)
* (optional) *player* is the player that caused the FOF to fall; needed for some effects such as who to award points to if you killed someone =3 Defaults to nil
* (optional) *origalpha* is the FOF's original alpha before crumbling (the thinker for respawning + floating crumbling FOFs tinkers with the alpha for some reason). Defaults to rover.alpha
* (optional) *crumblereturn?* will the FOF respawn afterwards? Defaults to false (NOTE: probably should be set to `not (rover.flags & FF_NORETURN)` for best results currently, kind of weird otherwise)
* the return value of EV_StartCrumble means something I forget offhand now ...it's either true or false though, mind
See MonsterIestyn/crumble-fof on the FTP for a test exe (srb2win-crumblefof.exe), a test map for the linedef, and a test lua script for EV_StartCrumble (which can also be tested in the map).
See merge request !55
Lua more stuff
More new Lua features and fixes:
* Most Lua functions that deal with stuff that exists only in levels now should spout Lua errors instead of crashing the game if you try to use them outside of levels. Likewise, accessing any of the tables that contain level-only stuff (players, sectors, lines, etc etc) spouts Lua errors too outside of levels.
* `userdataType(variable)` now exists: this function simply returns the type of the userdata variable given as a string (e.g. `userdataType(players[0])` returns "player_t", `userdataType(sectors[0])` returns "sector_t"). This also includes "minor" userdata types for array members of other userdata types, such as .powers of player_t variables or .lines of sector_t variables (which would give the strings "player_t.powers" and "sector_t.lines" respectively).
* The Lua hook "MobjMoveBlocked" now exists: functions for this hook are called whenever a mobj attempts to move horizontally but is blocked by a wall or solid mobj (or whatever else can cause P_TryMove to return false, assuming it doesn't remove the mobj). In theory this hook could be very useful for behaviour such as sliding or bouncing off walls without the need of flags like MF_SLIDEME or MF_BOUNCE etc. Format for use is just like most generic mobj hooks: `addHook("MobjMoveBlocked", functionname, MT_OBJECTTYPE)`, where `functionname` is a function that takes a single mobj_t argument.
See MonsterIestyn/lua-more-stuff on the FTP for a test exe (srb2win-lua-more-stuff.exe) and some test scripts for the above changes.
See merge request !67
* Super sprites are now deliniated via an additional S_SUPER lump between S_START and S_END. Above are normal sprites, below are super sprites. Handled internally via FF_SPR2SUPER.
* Sprite2 numbers are now appropriately limited for the data type that stores them.
* SPR2_SPIN is now SPR2_ROLL, SPR2_DASH is now SPR2_SPIN and SPR2_PEEL is now SPR2_DASH. Makes more sense, right?
Add a vertical flip variant for the translucent column drawer.
Translucency is now properly distributed: 0.00 leads to no render at all, 0.1 to TRANS10, ..., 0.9 to TRANS90, 1 to regular column drawer.
(various large invisible blocks used in the level cause rain to make splashes high above the main level, high enough to make ghostly rain splash sprite artifacts appear sometimes in nearby areas)
This is used by Command_Addfile in the MD5 calculation code, so that it can search subfolders properly and allow addfile in netgames to treat them the same way as in SP
* Changed the order of Record/Nights Attack and its level select menu option so that you go from the main menu to the map page to level select, rather than main menu to level select to map page.
* Cleaned up a lot of code.
http://i.imgur.com/jJ3YZUd.png
Will be discussing what to do with the space freed under "server options" the heading on IRC tomorrow.
(MI, if you're looking - the mistake was that I set up an IT_CALL menu line as IT_CVAR by mistake, which of course caused a crash when trying to get ((consvar_t *)M_GameTypeChange)->string. ;P )
Updated the mid-game gametype/level select menu! Just need to combine it with the server creation menu, and then I'll be ready to make a merge request...
This fixes the grid floors in TD's Lava Mountain freezing the game if they go off the bottom of the screen far enough (they have ACWRFL1A as the wall texture, which is a single patch texture with holes)
Still need to figure out the way to sort pressing esc on reselect level sending you back to the title screen. This will need further whittling before I can call this a solved section and move onto MP stuff.
* More comprehensive "pick up where you left off" system.
* Made individual map name selection actually take into account the map name AND the act number if the heading isn't the zone name.
* Named all the new functions/etc "Platter" instead of "NewList", to make maintenence easier and also because it sounds delicious.
* The code, as a whole, is much cleaner.
* Allows for multiple items under the same heading now, with highlights and spacing consistently handled.
* Allows for picking up where you left off between menus now (assuming the same map is available on multiple screens).
* Defined M_CanShowLevelInList in terms of the two compartmentalised functions cleaved from it, in order to ensure consistency and prevent code duplication.
* Fixing an inconsistency with being able to change skin colours when you shouldn't be able to, much like the previous skin change issue that was fixed.
Better papercollision
Diagonal bounding boxes are no longer root 2 larger than they should be. Testwad is <root>/toaster/sawb.wad. Nice and simple.
See merge request !49
Slopewall transfer
As @Nev3r wants. Go along a slope, hit a wall? LAUNCH! Well, I mean. He wants it slightly less weak. I have already made it less weak than P_SlopeLaunch.
Also also I made the trail that goes behind the player when they're rolling take into account vertical momentum as well as horizontal, so that being launched directly up didn't leave you trailless.
Test with <root>/!LatestSRB2Files/srb2win_branch_transfer.exe and <root>/Nev3r/ACZMaster.wad (roll down slope directly in front of you).
See merge request !66
Revamps of several dated linedef type effects
Felt like being productive so made some things I hate suck less.
Linedef type 7 (flat alignment) now works as follows.
* Linedef angle (from v1 to v2) is flat angle.
* Origin of flat is manipulated to match v1's coordinates - unless ML_NOKNUX is flagged, in which case uses frontside x and y offsets as flat offsets instead.
* ML_NOSONIC prevents changing floor.
* ML_NOTAILS prevents changing ceiling.
* Both of the above flags at once prints a warning.
* (THZ and probably a few other maps need updating.)
Linedef type 540 (friction) now works as follows.
* Controlled by x offset instead of length - offset of -100 is maximum iciness, offset of +483(!!!) is the maximum sludginess BUT things are scaled such that +100 is about the maximum sludginess any reasonable human being would want in a level, 0 is ORIG_FRICTION)
* Not reliant on a sector special to function (can be applied solely by tag to in-map sectors or solid FOF control sectors)
* Uses less memory, perform less calculations, and not bug out objects which just happen to use movefactor for something
* PHYSICS CHANGE: Low friction surfaces actively impede your acceleration (and make your animation speeds faster to give off that Looney Tunes out-of-control effect)
* (ACZ and Frozen Hillside needs updating.)
Sector types 1 and 3 in section 3 no longer do anything.
Linedef type 3 (zoom tube) now works as follows.
* Abs of frontside x offset is speed in units of FRACUNIT/8.
* Abs of frontside y offset is waypoint sequence number.
* Effect 4 flag rotates the player to match the waypoint direction (same as before).
* (ERZ needs updating.)
Linedef type 11 (rope hang) now works as follows.
* Abs of frontside x offset is speed in units of FRACUNIT/8.
* Abs of frontside y offset is waypoint sequence number.
* Effect 1 flag makes rope transfer one-way. (same as before)
* No climb flag makes rope static. (same as before)
* (ACZ and maybe ERZ need updating.)
Linedef type 258 (laser) is almost the same as before, but has altered functionality.
* Its flashing is less obnoxious. (56.25% to 68.75% instead of 100% to 0%, at half the speed)
Linedef type 14 (Bustable block parameters) is new, and works as follows.
* Tagged to the control sector of a block that is likely to be busted (via executor or collision, doesn't matter)
* Concatenation of frontside textures is MT_ object type to spawn, defaults to MT_ROCKCRUMBLE1 if not present
* Sound played when being busted is object type's activesound
* Frontside x offset is spacing (in fracunits) of spawned particles, defaults to 32<<FRACBITS
* Frontside y offset is the fuse of spawned particles in tics, defaults to 3*TICRATE, if set to -1 fuse is not set
* Effect 1 flag makes particles "fly out" horizontally and vertically from the center of the FOF
Sector types 7 through 15 in section 3 no longer do anything.
Linedef type 250 (Mario Block) is almost the same as before, but has new functionality and is slightly different in another way.
* No Climb flag turns it into a brick block (set on Custom FOF via presence of FF_SHATTERBOTTOM - busts when hit from the bottom, player hits their head/fist/whatever, no more upwards momentum)
* Effect 1 flag makes it an invisible block (set on Custom FOF via absence of (FF_SOLID|FF_RENDERALL|FF_CUTLEVEL) - intangible from every side except the bottom. Becomes visible and tangible when it's hit once)
* Only updates side textures when moving down or stationary, not whilst moving up - more fidelity to the source material, less processing on the CPU, everyone wins.
* If FOF master linedef has a backside, then: [If there's items in it the FOF's flats are set to that of the backside sector's ceiling, otherwise the floor.] Otherwise, no flat change.
Linedef type 4 (Speed Pad parameters) now works as follows.
* Frontside x offset is speed in fracunits.
* Effect 4 flag doesn't center the player. (same as before)
* Effect 5 flag sends them off in rolling frames.
* Frontside upper texture is sound to play on launch, defaults to sfx_spdpad when not given
Sector type 6 in section 3 no longer does anything.
Object type 757 is changed as follows, and no longer works on its own - see Linedef type 15 for more details.
* Tag via its angle field
* Number of objects to spawn per tic around it via its z field, if zero then just spawn at center
* Is flipped if given MTF_OBJECTFLIP.
* (ERZ and Seraphic Skylands - if we use that map - needs updating)
Linedef type 15 (Fan particle spawner parameters) is new, and works as follows.
* Tag is tag of object(s!)
* Object type set via concatenation of frontside textures, MT_PARTICLE is default
* The length of the linedef is the radius the particle is spawned out (zeroed if z field is 0)
* Frontside x offset is speed upwards
* Frontside y offset is number of degrees to turn each tic (zeroed if z field is 0)
* Frontside floor and ceiling heights are the heights in which the particle is bound through some fun mathematics
A_ParticleSpawn is changed, too.
* Object type is now changed through actor->threshold instead of var1 to support Linedef type 15.
Test executable uploaded at /toaster/srb2win_branch_flatalignment.exe on the ftp.
Test file uploaded at /toaster/flatalignment.wad on the ftp.
Breaks compatibility with 2.1 so put in internal.
See merge request !29
Plane displacement
Basic support for plane displacement, no netplay support as of writing but this is what Nev3r wanted moreorless at least.
Linedef types 66-68 are the plane displacement specials; 66 = move floor only, 67 = move ceiling only, 68 = both
Front sector = control sector
Tag = tag of target sectors to be moved whenever the control sector floor moves
Linedef length = movement factor relative to control sector movement, 256 = 1:1 with control sector. 128 is half as much, 512 is twice as much, etc.
Whenever the control sector floor moves (not ceiling, never ceiling), the selected planes of the tagged sectors all move (mind, they have a tic delay due to how it all works, it's not perfect really). No support for reverse speeds yet sorry.
EDIT: oh, btw, test exe and test map are included in my folder on the FTP (srb2win-plane-displacement.exe and plane-disp-test.wad, respectively)
See merge request !61
* Made the name of P_PrepareSlopeToWallTransfer (now P_GetWallTransferMomz) make sense.
* Bugfixed the case where you couldn't reliably guess the angle of the wall you just hit.
* Seriously reworked a lot of stuff behind the scenes, thanks to Red's comments.
* More consistent behaviour.
* Launching power is now scaled to the slope's angle relative to the wall you hit, so no massive launches when you hit the side of a steep slope.
* The code is a lot messier and the function name doesn't make any sense any more, so I need to clean that up in the morning.
* Need to figure out how to prevent tiny launches that uncurl you when spindashing up against walls.
* Spindashing trails now takes into account vertical momentum as well as horizontal - it was stupid not seeing your spintrail just because you weren't moving very fast horizontally!
No exe uploaded because it's almost 2am.
GFZ3 Unfuckening
Some tweaks to the GFZ3 Eggmobile's behaviour to make it less frustrating for old and new players alike.
* GFZ3 Eggmobile's laser won't change its angle when you move left and right anymore.
* Changed because its ability to move quickly was extremely punishing for new players (see ProJared's youtube video on the matter).
* http://gfycat.com/PassionateUnknownAgama (the twitching on the third laser has been fixed since this was recorded)
* GFZ3 Eggmobile will, when too far away from the ground and moving upwards, slow itself down vertically.
* This was punishing and annoying for both old and new players alike.
* http://gfycat.com/CornyLeftDungbeetle (old values - the typical settling height is slightly lower now)
See merge request !42
No more double-decker Detons
Oversight of a tiny hack when working on the flickies branch meant detons released twin flickies when hitting stuff. As cute as that is, it's also pretty weird.
See merge request !62
This new function returns a string representing the type of userdata the variable given (e.g. mobj_t, player_t), it even works on "minor" userdata types (player_t.powers, skin_t.soundsid, sector_t.lines, etc)
* Value was getting populated even when it was irrelevant. That's fine, just move it after the valueless parsemode switch.
* Oh, it's struppr'd, of course it's going to compare badly with a lowercase string.
* ...oh, strncmp returns zero when it's equal, not true. Right.
<root>/toaster/smilespatch.wad and !LSF test exe updated on the FTP, btw.
* Create a normal skin, but replace the S_SKIN lump with an almost empty one named P_SKIN.
* Provide "name = existing skin name as one of the first line (comments allowed)
* Reset individual spritenames back to zero sprite2s (or one for SPR2_STND to prevent complete removal) via "reset = SPR2_****" statements.
* No support for changing skin properties that are non-visual at the moment, but I don't really feel like it's wise to have those changable with patch alone. (Hello, tons of "modern Sonic" wadfiles which just change vanilla Sonic's ability to CA_HOMINGTHOK!)
* Sprites patch over.
To see an example in action, look at <root>/toaster/smilespatch.wad.
-If the server tries to kick a joiner who is downloading the game state, they will get a timeout instead, because a regular kick would only happen once the game state has been downloaded
-Added a timeout for player ticcmd packets, again to prevent freezes to happen in some cases
-File/game state downloading is now faster, the speed is controlled by the "downloadspeed" cvar, in packets per tic
-The reason is now properly shown when the server refuses connection
-Changed the default values of "nettimeout" to 10 seconds (previously 15) and "maxsend" to 4 MB (previously 1)
-Added a "noticedownload" cvar that displays a message in the server console when someone is downloading a file
CMake: Fix nasm Linux builds
When compiling under Linux with CMake and nasm/yasm enabled, the operation would fail during linking with undefined symbols related to the tmap files.
This commit adds support for passing flags to the assembler and passes ```-DLINUX``` in order to compile.
After this change, binaries are successfully compiled with either nasm or yasm on Linux systems.
Tested on Ubuntu.
See merge request !153
Other notes:
* on second thought I'll keep the hw_clip functions' gld prefixes rather than HWR, not like it matters either way
* despite the extra lag it does fix the issues with translucent walls and such when displayed at different vertical angles, such as with the GFZ1 waterfall
Other notes:
* Renamed all new functions to have HWR_ prefix instead of gld_, for consistency
* HWR_FrustrumSetup and HWR_SphereInFrustum are disabled and require HAVE_SPHEREFRUSTRUM. This is because 1) SRB2CB did not need the code, so presumably neither will we, and 2) there are some OpenGL API functions used there that due to our way of using OpenGL we don't use outside of r_opengl.c, which makes dealing with HWR_FrustrumSetup complicated in theory
* The new clipping functions are not added to OpenGL's "main" rendering code itself just yet, they're just available to use now once hw_clip.h is included
Hardcoded VAda Flickies
Many thanks to MI for his help, even if he has sinful opinions on what the collection of creatures should be called. ;P
* Flickies are now handled via A_FlickySpawn instead of hardcoded in P_KillMobj, so there can be mobjtypes with MF_ENEMY which don't create flickies, or other mechanisms which can much easier.
* Added map header "FlickyList" (aka "AnimalList") parameter, which can either be set to:
* A species (eg: "Rabbit" or "Bluebird", amongst 17 currently supported types in dehacked.c table FLICKYTYPES - including the seed from Sonic CD, which isn't limited to 'soniccd on' in the console now)
* Any valid mobjtype that isn't MT_NULL (eg: "MT_FLICKY_GHOST")
* A comma-seperated list of either of the above, up to 64 entries long (eg: "Cow,MT_FLICKY_SPIDER,Chicken")
* "All" - sets behind-the-scenes stuff to use every 'normal' type of flicky in FLICKYTYPES (a distinction which can be utilised to hide secret level flickies where they wouldn't be appropriate for the main game)
* "Demo" - sets behind-the-scenes stuff to use the five flickies closest to the species used in the game's long history.
* "None" - prevents any flickies from spawning.
"Demo" is functionally the default value if you don't include a FlickyList parameter in the header at all.
Of note, a bunch of functions are now created:
* A_FlickySpawn - spawns flicky.
* A_FlickyAim - aims for area near target, but not directly on them - turns around when hitting wall
* A_FlickyFly - flies/swims around target (calls A_FlickyAim)
* A_FlickySoar - hacky alternate fly (calls A_FlickyAim)
* A_FlickyCoast - slowing down before going off again
* A_FlickyHop - fracunit-scale precision for A_BunnyHop
* A_FlickyFlounder - A_FlickyHop with randomisation
* A_FlickyCheck - State-setter for falling, or being on-ground
* A_FlickyHeightCheck - State-setter for falling, or being below a certain height relative to target
* A_FlickyFlutter - A_FlickyCheck, but with a slow fall/movement (calls A_FlickyCheck and A_FlickyAim)
I don't need to enumerate the object types and states that have been added, do I?
Oh yeah, I also made it so get_mobjtype's failure value was MT_NULL and prohibited SOC from editing the properties of it to compensate.
IN ADDITION: Killed "soniccd" console command, since it made things more complicated and honestly being able to specify Sonic CD seeds in the level header is a better option.
See merge request !60
Savegame hotfixes
Yes, this another netgame related fix! Named this "savegame hotfixes" rather than "ERCZ hotfix" or the like in advance of the fact we probably need a general branch for other $$$.sav fixes?
Anyway, fixes included in by this branch:
* ERCZ's lava falls now act as expected rather than being stuck in place for the map's duration, fixing all other known desynchronisation issues known in the map for the time being (yay)
* Changing sector tags in a map no longer causes joiners to netgames to have their SRB2 application stop responding etc
* Player names should no longer turn red in the console in gametypes outside of CTF/Team Match if a resynch occurs (not $$$.sav related, but it's related to netplay so I lumped it in anyway)
See merge request !150
One Eggscalibur fix
Use mobj->watertop instead of mobj->spawnpoint->z. CEZ3 is far from fixed in multiplayer, but this is still one less thing to worry about.
See merge request !148
Software plane rendering fixes/cleanup
This is mostly cleanup, with the exception that polyobject planes should now behave somewhat better than they do in 2.1 currently (translucent polyobj planes should now always be actually translucent regardless of where you view them from, for instance). I can't claim I've fixed their rendering once and for all though, there may still be bugs for all I know...
See merge request !136
Some texture-related fixes
Bugs fixed in this branch:
* upper/lower/middle textures with non-existent texture ids being capable of crashing the game. For instance, RVZ1 has colormap codes on non-colormap linedefs, which causes them to wind up with invalid texture ids because of how the game tries to interpret lower/upper textures with "#" followed by characters on normal linedefs. Fortunately these "textures" are normally not visible anyway (since they're all in control sectors) unless they are swapped with in-level textures by some crazy Lua script of some sort...
* animated single-patch textures with holes displaying garbage on first viewing (see this thread: https://mb.srb2.org/showthread.php?t=42195)
* the heights of the lighting (shadows or colormapping) from water/translucent/shadowcasting/etc FOFs become messed up when displayed on repeated midtextures.
See merge request !144
Flat changing hotfix
This should fix how Lua scripts that change flats in levels, particularly to flats that don't already exist in the level, cause SRB2 to crash for anyone who joins a netgame afterwards. (I'm not sure if it's a consistent thing or not though)
Probably needs a good test to verify the issue is completely fixed before being merged in. Maybe there are other minor things I didn't account for in this fix? I don't know!
See merge request !141
Dunno who thought it was a good idea to lump tag, nexttag and firsttag together in $$$.sav, but that meant changing sector tags caused SRB2 to stop responding since it lead to the tag lists being broken
This fixes ERCZ's lava falls not moving after joining a netgame at that stage. Possibly explains other various floor/ceiling related netgame quirks that haven't been noticed until now, maybe even in multiplayer levels.
Remove secplanes
This is just removing SSNTails's old port of ZDoom's secplane code and math, from back when he attempted slopes himself. The slopes we've had since 2.1.15 however do not need these, so we can pretty much toss the code for them out now (nothing uses them anyway).
See merge request !149
-Updated packet name list so the debug file no longer shows garbage packet names
-Replaced byte values with actual net command names in the debug file. Only the first net command in a packet will be shown though
-Added a MOBJCONSISTANCY define that makes the game takes all revelant mobjs to be counted in the synch seed
-Added a PACKETDROP define that adds two console commands "drop" and "droprate" to simulate bad internet by dropping packets
-Added/changed comments here in there in the netcode
-Fixed a minor error that would ignore one of the urgent ack slots
-Added a space between the map name and "zone" for the messages shown in a joiner's console
This fixes Brak's electric barrier disappearing for joiners to ERZC. There seems to be some issues with the lava falls there too I've found, but the electric barrier actually stays around now at least
* Set the default flicky group to be equivalent to Flickylist = Demo.
* Refactored a little. (This also removed a crash-causing typo in a Z_Free in P_ClearSingleMapHeaderInfo.)
* MT_EXPLODE's anims partially FF_ANIMATE'd.
* A_FlickySpawn turned into a wrapper for internal function that does what A_FlickySpawn did but returns a pointer to the spawned flicky.
* Added the ability to read in mobjtypes as well as from a short list of flicky constants.
* Added a new state, S_XPLD_FLICKY, which is the new deathstate of all badniks.
* Put the disabled animal-spawn-on-P_KillMobj behind a #define.
* Renamed the branch and associated properties to something not rife with sin.
No idea if this compiles yet (let alone if what is there works at all), just getting this out the way so I can work on certain other things *cough plane displacement cough*
this fixes a crash in (old) GFZ2 at the ramp as a result of creating pv1/pv2. This probably means before pv1/pv2 there could have been some silly typecasting from vertex_t to polyvertex_t to get fixed vertex coords and such...
Spindash dust
Charging a spindash kicks up dust, we all know this feature was dying to get in at some point. Bubble and flame forms of spin dust are included from FSonic, for underwater and elemental respectively.
Oh, and as a bonus I reorganised the spindash/spinning/other ability2 stuff code to look a bit neater and more organised.
New resources:
* MT_SPINDUST - the object
* S_SPINDUST1 to 4 - the normal form's states
* S_SPINDUST_BUBBLE1 to 4 - the bubble form's states
* S_SPINDUST_FIRE1 to 4 - the bubble form's states
* SPR_DUST - the normal form's sprite set (uses frames A to D, just pinch FSonic's sprites really)
* SPR_FPRT - the flame form's sprite set (frame A only)
SF_NOSPINDASHDUST disables spindash dust for a character
See merge request !52
Multi-patch texture support for transparency AND translucency
Fixes the transparent bits of the multi-patch glass texture in THZ1 turning cyan when linedef types 900-908 are applied for translucency
See merge request !56
Zoom tube camera fix
Fixed a mistake where I accidentially allowed people to change the player angle whilst in a zoom tube when previously improving them.
See merge request !57
Smoother ropes and zoom tubes
Makes rope hangs and zoom tubes suck less. Specifically, they handle corners (and vertical height changes, ala sloped rope hangs) a LOT nicer. Ported from internal.
See merge request !139
As LJSonic has pointed out, there's no need for a for loop in either case; just use sector->floorpic/ceilingpic as a levelflats index directly
(Besides, if that was to stop any out-of-bounds indexes being used, that's hardly the way to do it anyway)
*Added FLIPX/FLIPY support for multi-patch textures and single-patch textures without holes
*Added FLIPY support for single-patch textures with holes; I'll sort FLIPX support out later
To re-enable support for the above, uncomment the define HAVE_LUA_SEGS line in lua_script.h. Plain bbox userdata stuff is not disabled (though currently it's not used anyway)
* Cleaner A_ParticleSpawn code.
* Removed several hacks with Mario blocks, and corrected a mistaken assumption with when the FOF's thinker is being applied.
* Made the flashing of T_LaserFlash even less obnoxious.
Turns out sdl12's version of this function only did stuff for DC/GP2X ports; support for them have been cut out for SDL2, so for now let's just not use the function at all
I'm convinced there's going to be some stupid side effects from doing this, but it's the quickest way I can fix the polyobj planes not all appearing anyway
Sprite2 changes
Some stuff!
* Lua access to sprite2.
* Introducing new Lua-exclusive function, P_IsValidSprite2(mo, spr2). Basically just a wrapper for (((skin_t *)mobj->skin)->sprites[spr2].numframes > 0), useful for creating custom sprite2 defaulting functions since hooking into P_GetMobjSprite2 wouldn't be worth it.
* FF_ANIMATE support for sprite2s. The var2 of the state works identically to normal FF_ANIMATE, but var1 is completely disregarded - it just runs all of the frames available to that one sprite2 animation set.
* As a result, a bunch of states which were either not previously animatable or had animated at constant speed now get animation without state changes.
* P_SetMobjState now supports sprite2 defaulting like P_SetPlayerMobjState does.
See merge request !51
Damage control + Match rebalancing
This is two branches in one since while I was working on damage-control's changes months back, I felt it was best Match rebalancing was merged in here too (thanks JTE for helping me do so).
Changes from damage-control:
* `player->health` (formerly the "HUD copy" of `player->mo->health`) is now `player->rings`, and is also now the player's actual ring count.
* `player->mo->health` (formerly rings + 1) is now always 1 when alive, regardless of ring count; if player with rings is damaged, this is untouched.
* P_RingDamage now includes ring spilling code.
* P_ShieldDamage now has a damagetype argument, allowing me to remove the last MT_NULL hack left in from the pre-damagetype days that I forgot about.
* The old "switch-to-seestate" enemy damaging behavior in P_DamageMobj has been removed. This was a Doom left-over and doesn't really affect SRB2's enemies anyway - see, Doom enemies had a random chance of using seestate or painstate, SRB2 enemies always use painstate.
* Other minor efforts to reorganise damaging code and have it make more sense, but otherwise nothing that should affect gameplay in general.
Changes from match-rebalancing:
* New weapon/ammo dropping behavior: if you have the weapon panel + ammo, you drop the panel (but not the ammo); if you don't, you just drop the ammo.
* New Match ammo consumption: Weapon rings can now be fired with no rings at double the ammo cost.
* New emerald behaviour: collecting all 7 emeralds no longer turns you super (read: Match super is dead now) but instead steal points from enemies and gives you and teammates invincibility + sneakers
* Tails ringslinger buff: Any character with CA_FLY will now throw rings 1.5x as fast.
See merge request !28
To that end, I've made MF_MONITOR *without* MF_SHOOTABLE act like MF_MONITOR does, and MF_SHOOTABLE allow for both missiles AND players to destroy. This has had the side effect of allowing MF_ENEMY and MF_BOSS to use MF_MONITOR as a substitute for MF_SHOOTABLE that doesn't allow missiles to cause them damage, which might be useful for Jetty-syns.
* All Lua-originated sprite2 settings are now forced through P_GetMobjSprite2. Makes sense because of SPR2_JUMP, which none of the main characters have sprites for yet all use.
* Cleaned up P_GetMobjSprite2 to not set irrelevant, otherwise-unused variable.
Console improvements
* Unused console backgrounds no longer take up memory
* Input cursor can now move left and right
* Support for selections (Shift-arrow keys, CTRL-A, etc)
* Clipboard support (CTRL-C to copy, CTRL-V to paste, CTRL-X to cut)
* Fixed handling of simultaneous modifier key presses
https://dl.dropboxusercontent.com/u/3518218/21/console.gif
None of this affects chat yet, that's not part of the console. I'll look at it later.
See merge request !133
I added similar checks for the other num* but it seems some MD2s break the other limits without knowing anyway ...so I've commented these checks out for now, unless we have further discussion regarding them later on
* Space sector support complete, bounds of drowning now altered slightly.
* Knuckles climb now has symmetrical slope support for both normal and reverse gravity.
* All slope-determining topheight and bottomheight code is now identical in form.
* Camera postimages now support slopes properly.
Moved the handling of P_PlayerInSpecialSector to P_PlayerAfterThink from P_PlayerThink.
* This allows the player to get hurt on sloped lava surfaces that are moving downwards.
* Also prevents the player from standing on death pits for 1 tic.
* Prevents the player moving 1 extra tic's worth of movement of pain when hit by sector.
* Thankfully, no consequences re conveyors.
* Like, the only consequences I've found have been positive. However, this DOES need to be thoroughly investigated before it can be allowed anywhere near Next itself.
(neither does P_CanRunOnWater, but I don't think it's necessary to make that check more complicated as you probably shouldn't be able to waterrun up steep surfaces anyways)
Also, the "teleport" devmode command can now gracefully handle coordinates specified outside maps with no/few thok barriers, which previously prevented teleport via the thok barrier bleed's sector floor and ceiling being equal.
Fixing various problems with MF_SOLID collision
(I, toast, wrote the original merge request, but Alam made this merge request because I made a mistake. Twice. In a row.)
* Solid objects are now no longer intangible when your z is less than the other object's.
* I originally thought the bug was limited to just solid objects on slopes (hence the branch name), and was wondering about undesired side effects - but looking at this gfy, this was a major bug that slopes made easier to expose.
* Unfixed = http://gfycat.com/BareLimitedCavy
* Fixed = http://gfycat.com/JubilantOffensiveGar
* You now properly lose your momentum when jumping at a solid object.
* The way I fixed this was a hack, but it was originally a much worse hack which resulted in very bizzare physics issues, so...
* Unfixed = http://gfycat.com/ShockingAbsoluteArthropods (also demonstrates the first bug)
* Fixed = http://gfycat.com/EmbellishedCourageousGordonsetter
See merge request !119
Fixed players disappearing when spindashing whilst wearing multi-layer shields
* Before: http://i.imgur.com/gxUFElo.png
* After: http://i.imgur.com/NxsOg94.png
The problem was that MT_OVERLAY's default radius and height were never getting changed from 1*FRACUNIT, and that meant that when you spindashed, the game considered it completely below the surface of the flat you were standing on. Since you're not usually clipped on flats that don't belong to FOFs, we didn't notice this aspect of the issue sooner.
(SORRY FOR THE MULTIPLE MR'S AGAIN I TOTALLY SUCK AT REMEMBERING TO MAKE SURE IT GOES TO NEXT INSTEAD OF MASTER)
See merge request !124
my P_SearchBlockmap_* functions are now a single searchBlockmap function, you can choose between "objects" and "lines" with the first arg to decide what to iterate through. I also rearranged the argument order a bit for easy stack cleanup etc
I'll remove the old stuff later, don't worry, it's disabled for now
Development improvements
An improvement to Objectplace I've wanted to make for a loooong time.
* Object number up/down is now assigned to ringslinger weapon next/prev. SO much nicer to use, especially since most people have that stuff bound to the scroll wheel.
Also, some changes to the devmode overlay:
* Plays nicely with showfps on - see http://imgur.com/a/zSzvm for the various cases (showfps on, devmode 65535, and both).
* Add PF_THOKKED to the flags in devmode DBG_DETAILED (as "TH").
* "Flags:" replaced with "PF:", "Heap used" replaced with "Heap". The latter is a debatable change, but the former isn't - otherwise the line is way too long compared to the rest of the stuff.
See merge request !45
Hardcoded music name switches
Like I said earlier, it's better if all the hardcoded music switches in 2.2 start with an underscore so that it's harder to accidentally overwrite them.
Should be accepted when music.dta is updated.
See merge request !17
Same no non-music lump requirement as music.dta, and is ignored with no error if music_new.dta doesn't exist
(should hopefully make playing around with music easier)
Also, only one shield ability is selectively blocked by being Super now, and that's because Invincibility does it too and therefore I assume that's a match balance thing instead of a keyboard clash.
v.drawScaled negative scales fix
Lua now errors if you try to use negative scales with v.drawScaled, rather than crashing as it does in 2.1.16 currently. Not much else to say here.
See merge request !126
* Bubblewrap shield bounce now no longer allows thokking post-bounce, but still allows bouncing
* plus a bunch of tiny changes to clean up code around the place.
Fixing FF_REVERSEPLATFORM clipping fixes
Forgot the case where == 0.
Tested by @wolfy852 in Top Down, where the bugs this caused were first discovered.
See merge request !121
Even more slope-related fixes
What it says on the tin pretty much:
Currently included fixes:
* Pusher specials applied to FOFs did not properly account for slopes applied to the bottom plane; this probably was just a minor slipup that appeared on adding the support in the first place, I take it? (some waterfall in the last section of SUGOI's Fudge Canyon is the only place I can think of offhand where this bug is noticable)
See merge request !114
* Some shield sounds swapped (can be reverted later).
* Partial implementation of S3K shield abilities.
* The ability to elemental-groundpound onto gold monitors without going straight through them.
* Force shield ability removed because nobody could agree on it, we'll keep it blank until another idea can get through the disagreement juggernaut.
* shields give you 1000 points
* redundant shields don't make you puase
* checkpoints give you 2000 points
* falling down a deathpit is just falling, not bouncing
Treating " as whitespace in TEXTURES (and animdefs too i guess)
SLADE adds this character in its TEXTURES editor and makes SRB2 cry unless the lump is manually edited; this just treats it as whitespace so we don't have to think too hard about it.
Also, two I_Errors now refer to the correct lump name.
See merge request !122
Proper barrel sky distortion
Skies now use proper barrel distortion in both axes, rather than just the x-axis (i.e. just horizontally) as in all previous SRB2 versions. Credit goes to Nev3r for the original change and idea.
Was going to make an option for a non-barrel distorted sky, assuming barrel distortion is the default, but I just can't quite get it to work in a way that is pleasing to the eyes. So I've not bothered with it here for now, unless someone objects to barrel distorted skies for any reason?
See merge request !35
FOF wall slope skewing
FOF walls now can optionally skew with respect to slopes (software mode only currently):
* Upper Unpegged on the CONTROL linedef enables wall skewing
* Lower Unpegged on the IN-LEVEL linedefs ^1 determine which slope to skew with respect to (off = top slope, on = bottom slope)
* If Transfer Line is used however, Lower Unpegged on the control sector's linedefs does the above's job instead
^1 (this is because they already control pegging of individual FOF walls as it is, so this is for convenience and my sanity that they also deal with skewing)
See merge request !39
Fixes to horizontal spring collision
Fixed various issues arising from collision with exclusively horizontal springs. Thamks to @Inuyasha for the heads up! Of note:
* If you hold down your jump button whilst jumping into it, you no longer immediately use your ability.
* Characters with (CA_DOUBLEJUMP && CA2_MULTIABILITY) or CA_FLOAT or CA_HOVER no longer lose track of their jump count.
Also:
* Upped the strength of info.c's red and yellow horizontal springs.
See merge request !41
Horizon lines
Horizon lines for software mode! Place a Linedef type 41 somewhere on a one-sided linedef and it'll do fancy rendering hacks to draw the adjacent floor/ceiling to the "horizon". One small thing to sort out when I remember to do so, but this is good enough for merge already.
See merge request !44
FF_ANIMATE additions: globally synced animations
FF_GLOBALANIM = makes the animation synced to the level's timer, so all objects will display the same frame at the same time
![](https://dl.dropboxusercontent.com/u/3518218/22/srb22-0008.gif)
I mean, doesn't that look so much prettier?
There's also some changes to FF_MIDDLESTARTCHANCE (FF_ANIMATE behavior was split due to not acting consistent between that and SPR2 behavior).
See merge request !46
* Object number up/down is now assigned to ringslinger weapon next/prev. SO much nicer to use, especially since most people have that stuff bound to the scroll wheel.
* introducing the new friend, SH_FORCEHP (which is used as a bitmask to get the extra hitpoints of a force-shield user)
* P_DamageMobj now considers the unimplemented shield constants as well as the implemented ones.
* When not pressing any direction, you now go backwards by default - to emphasise that this is primarily for defensive, not offensive, purposes.
* The camera can now handle the player going backwards without them going completely off-screen.
* Fixed some overzealous checks.
* The spinfire ring is now capable of damaging enemies. (god, what a terrible hack this is)
* When ground pounding, you now bounce off the floor a little bit to make the ability less spammable.
* The Dodge Dash
* Allows you to dash - no control, no falling, no key response - for 2 + (number of extra shield hitpoints) tics.
* If you're holding movement keys down, you dash in the direction you're holding - otherwise, you dash directly forward.
* You're spinning (spindash spin, not jump spin) until your dash is over, then your momentum is cut down significantly and you end up in falling frames.
* It may not necessarily be super useful for Sonic, but it helps the other characters.
* http://gfycat.com/BogusFailingFritillarybutterfly
* http://gfycat.com/PoliticalIdealisticBallpython (outdated speed, shows any direction)
Animated sky support
What it says on the tin: skies can be animated textures now. Just set them up as normal animated textures (keeping in mind the starting texture still has to comply with the SKYn/SKYnn/SKYnnn naming format) and hey presto, your sky animates.
See merge request !34
* GFZ3 Eggmobile's laser won't change its angle when you move left and right anymore.
* Changed because its ability to move quickly was extremely punishing for new players (see ProJared's youtube video on the matter).
* http://gfycat.com/PassionateUnknownAgama (the twitching on the third laser has been fixed since this was recorded)
* GFZ3 Eggmobile will, when too far away from the ground and moving upwards, slow itself down vertically.
* This was punishing and annoying for both old and new players alike.
* http://gfycat.com/ShabbyAncientEarthworm (old values - the typical settling height is slightly lower now)
* If you hold down your jump button whilst jumping into it, you no longer immediately use your ability.
* Characters with CA_DOUBLEJUMP and CA2_MULTIABILITY no longer lose track of their jump count.
(the problem was that MT_OVERLAY's default radius and height were never getting changed from 1*FRACUNIT, and that meant that when you spindashed, the game considered it completely below the surface of the flat you were standing on. Since you're not usually clipped on flats that don't belong to FOFs, we didn't notice this issue sooner.)
Basically, it manually sets *_FOUND, *_INCLUDE_DIRS and *_LIBRARIES instead of using find_package. Frankly I have no idea how well what I've done works currently though, not even sure if I've set the _LIBRARIES variables correctly. Again, it's WIP work, this can probably be fixed eventually I suppose.
* Camerascale, shieldscale, height and spinheight are now player attributes which are set to the skin attribute on skin change, not read directly from the skin.
* P_GetPlayerHeight and P_GetPlayerSpinHeight are now macros instead of functions.
* Extra protection against switching to a locked skin.
* flips the sprite ala MFE_VERTICALFLIP except you don't need to flip the direction of gravity for the object just to draw upside down
* stacks properly with reverse gravity
HOWEVER, since these changes to PIT_CheckThing do raise questions about whether there may be unintended side effects here. As a result, I may remake this for internal only if necessary.
* Sets the sortscale of the mobj to that of its tracer.
* Basically, Smiles' tails won't clip through shields thanks to this.
* http://gfycat.com/GraveGlassEwe
* Also has support for chains of MF2_LINKDRAW!
More slope fixes (aka sorry guys I made another quick SUGOI fix)
Another slopes fix branch!
This branch currently includes a fix for:
* Knuckles gliding into a slope while in 2D mode causes him to try to "climb" on air above them, if the original non-sloped height is higher. Unfortunately he still tries to grab onto places that he can't really climb on, but at least now it's on the slope itself and not in mid-air lol. This issue is encountered in SUGOI's Retro Hill Zone, if you want to check for yourselves.
* Bustable FOF-busting code for both players AND pushables not accounting for slopes
* (Unrelated to slopes): Fix FF_SHATTERBOTTOM FOFs acting like THZ goop when stood on; I added this fix as a bonus because I encountered it in a test map of mine for the bustables fix
(Other fixes may or may not appear here in the near future, I haven't decided yet. Don't wait on me to get in any further fixes before merging, that said)
See merge request !110
Last-minute NiGHTS exiting bugfix
One single-line fix concerning the end of NiGHTS maps. Extremely small, literally zero side effects here, the only reason I'm not committing directly to master (aside from ettiquette) is that I don't have the ability to do so.
* The NiGHTS drone had a single tic of visibility when you hit the goal, which is evident stepping frame by frame through http://gfycat.com/ComplicatedComposedAoudad (the contents of which may or may not make it into 2.2). This is no longer the case.
See merge request !100
Also, the particles made via spindashing in shallow water are now located behind the player. This does move the running particles too, but that's okay.
* Fixed bug where being pushed off a platform whilst charging a spindash would leave you in your charging frames instead of your rolling ones when you hit the ground (http://gfycat.com/MassiveThreadbareItalianbrownbear for how it works now, http://gfycat.com/MarvelousEnlightenedAuk is how it used to work)
* Fixed bug where spindashing on top of a bubble spawnpoint led to you being able to move around in spindash frames (no gif since obvious desired behaviour is obvious)
* Spindash animation speeds up the faster you'll shoot off.
* The spin charging mechanism is now scale-independent, and only multiplies by scale when shooting off - less FixedMul calls, and potentially deals with weird quirks of changing scale whilst spindashing that nobody's discovered because there's no place to find that in the main game!
Also:
* Climbing animation defaults to rolling instead of walking, because what.
Skewing direction is decided per in-level wall by the Lower Unpegged flag on in-level linedefs themselves, since they already decide the stuff for FOF wall pegging as it is. That is unless Transfer Line is involved which moves everything to the control sector linedefs instead...
Cutscene switch fix
Yet another fix for SUGOI, lol: apparently going from a final level's post-cutscene straight to a custom credits cutscene gets the latter stuck forever in the first scene (because the game accidentally stops the cutscene responder from realising the custom credits cutscene is running). This branch of course makes a fix for that.
See merge request !108
Wall collision fixes
Fixes included in this branch:
* A fix for a specific crash encountered in a SUGOI map (sound familiar?) caused by bouncing off a wall adjacent to a slope
* A fix for solid midtextures not accounting for Effect 3/Peg Midtexture properly (https://mb.srb2.org/showthread.php?t=41462)
* A fix for solid midtextures not accounting for texture y offsets properly for non-Lower Unpegged/Peg Midtextured midtextures
* A fix for solid midtextures not accounting for "infinite" repeats (Repeat Midtexture + no repeat count set)
* ~~A fix for Effect 4 on Polyobject First Line making that particular linedef's midtexture solid in addition to making planes visible - this is not wanted if you want a polyobject with both visible planes and full intangibility.~~ Apparently they never did this anyway, don't mind me \o/
See merge request !104
Fix non-player objects having busted step-up/down on slopes
Why the fuck did I make this a player conditional in the first place holy shit
See merge request !103
RA menu can be opened if the game is modified, but Start can't be selected. (Obvious reason: so scripts to display info can be used easier)
Fixed the stupid background for messages in the Record Attack menu, it was bugging me
Also, I added more sortscale handling in the places where I forgot it.
I probably need some help with the maths here to get this to work nicely. http://gfycat.com/LimpAgedDowitcher
http://i.imgur.com/UyOKX5u.png <-- this common glitch with crawlas given MF_PAPER (THEY'RE NOT GOOD AT TURNING NEAR EDGES) used to show the behind-crawlas in front of the front-crawlas.
Unfortunately, I've just discovered this issue (which happens with the old version of the sorting code too): http://i.imgur.com/QNjbATB.png but to be fair these crawlas have gotten stuck inside the edges of this platform, so I'm not sure I can do anything about this without cutting off Sonic's feet when he stands on the ground? shrug
* MF_AMBUSH is now MF2_AMBUSH, because it's something you turn on in a map editor, not with a SOC definition.
* Where MF_AMBUSH was is now MF_PAPER.
* MF_PAPER accesses all the stuff I did previously in this branch...
* ...as well as turn on paper-thin collision detection between mobjs, which I've gotten working but isn't perfect but it's still good enough for non-solid objects!!
* recognising that the offsets weren't going to be accurate if you just SWAPPED yscale and yscale2 over 180 degrees
* taking scale into account consistently
also, some optimisations
also, i've sussed out WHAT'S going wrong here - the topleft pixel of the sprite will always be rendered at the height on the screen it would be rendered otherwise, which is causing the waving. now to figure out what to change to get that to move appropriately...
some complicated mathemagic leads to something which... seems CLOSE, but not perfectly accurate, so i think i need to tweak it more
http://gfycat.com/JovialSpitefulAmericancrayfish for current behaviour
I DID make some steps towards re-implementing PIT_CheckThing for solids only in order to replace the hack long-term and hopefully use less CPU, but is currently disabled via #if 0 since I'm not comfortable changing the function signature of P_CheckPosition right now.
If there's any reason to bring the old system back we could make it togglable by one of the linedef flags I suppose. Not that many people would actually use it though, most likely
remove all the places where i've set vis->scalestep to anything other than 0 to see something that LOOKS okay, but doesn't fulfil exactly what i want (that being a sprite that looks exactly like a midtexture)
* Effect 3 (Peg Midtexture) is now accounted for properly, flipping the collision box position to match the actual rendered position of the midtexture
* Fixed incorrect application of y-offsets for non-lower unpegged midtextures collision boxes; +ve always goes up, -ve always goes down!
* Effect 4 now doesn't make midtextures solid for polyobjects at all - this "conflicted" with First Line having both Effect 4 (visible planes) and Effect 3 (intangible) simultaneously, where we kind of expect the first line's wall to not be made solid. This may be less of a problem in future SRB2 versions, but for now solid midtextures for polyobjects are disabled.
. tmthing can be NULL if called from PTR_SlideTraverse, so we should use slidemo instead
This fixes a crash that occurs in yet ANOTHER SUGOI map, involving bouncy walls next to sloped floors/ceilings
To understand: look at AjustSegs(void) in hw_bsp.c. It reallocates the vetex_t pointers for lines as POLYVERTEX_T pointers, and of COURSE things are gonna get wacky when you're casting pointers.
I dunno how resilient the FLOAT_TO_FIXED solution is or whether it'll be netgame compatible (yayyy float precision loss) but it's not like our builds are netgame compatible with themselves
* The NiGHTS drone had a single tic of visibility when you hit the goal, which is evident stepping frame by frame through http://gfycat.com/ComplicatedComposedAoudad (the contents of which may or may not make it into 2.2).
* When completing a NiGHTS stage with a non-zero link, the link could flash up in the final few tics before the fade to black. This just checks for player->exiting to make sure it shouldn't be shown.
* That hacky anti-NiGHTS-deaxisment code I commented out because I thought it was visual only? Reimplemented in a way that is both more and less hacky. It's identical in result to the original code, but takes a roundabout method to get there.
* Sprite references for SUPE, SUPZ and NDRL are removed because they are now unused.
* Helper's flashing conditional is restructured to do less flag swapping.
* The check for super setting FF_FULLBRIGHT is limited to MAXTRANSLATIONS now, and also correctly takes into account MAXSKINCOLORS == SKINCOLOR_SUPERSILVER1.
* NiGHTS collision bounds aren't hardcoded anymore.
* NiGHTS link will never display when leaving stage.
* Slightly tweaked rules for the supercolor setting when doing a NiGHTS transformation, but only meaningful for setting FF_FULLBRIGHT.
* if you can turn SF_SUPER, flash your skin's supercolor, otherwise be your normal color
* if your skin doesn't have a SPR2_NGT0 (horizontal fly), use Sonic's (this will hopefully be replaced by 2.2 with sprites of NiGHTS themselves)
* MT_NIGHTSCHAR made irrelevant, everything follows actor->target instead of actor->target->tracer now
* emerald is now player->mo->tracer instead of player->mo->tracer->target
* nightopian helpers flash for the 35 tics before they disappear
* nights capsule makes boss explosions/noises now (i can change it back i just like it better)
* drill off into the sky instead of fly up in floating pose (but no noise yet)
ALSO:
* default maxdash is now 70
* forgot to add supercolor to lua, it is there now
* SPR2_SMSL renamed to SPR2_SSTN (stun)
* any player with a skincolor that's in the super range is set to FF_FULLBRIGHT at state-set time, so no need to keep super players non-fullbright just because they use spin stuff
OpenGL planes fix
This branch removes a specific hack in the OpenGL code for detecting if a plane is for the floor or ceiling of a sector. This it turns out fixes ceiling slopes in Boinciel's SUGOI map going missing. Though, It doesn't fix that other glitch with one FOF (must be unrelated).
If you want to test these fixes out properly, make sure working in-level sectors, FOFs AND also polyobjects all still work fine, sloped or not.
See merge request !97
Fof slope crash fix
This fixes yet another software renderer crash, this time relating to sloped FOFs: sometimes the renderer thinks parts of FOFs where the top and bottom heights are the same height are actually the bottom going through the top (in other words a negative height). This causes problems when drawing normal walls around such FOFs since the game obviously doesn't expect negative heights anywhere along the FOF - before slopes, the game could just flip around the top and bottom heights automatically with no problems. This branch also should fix crashes for all genuine cases of negative FOF heights when slopes are involved, I suppose.
Hopefully this stops FuriousFox's SUGOI map crashing for the time being, all seemed fine when I tested it out myself.
See merge request !96
* Don't allow arbitrary numbers to be used for a skin's supercolor, only strings.
* Devmode is no fun allowed mode, so turn off the god hyper flash there.
* Several new supercolours.
- SKINCOLOR_SUPERSILVER1-5 (for fun) - "Silver"
- SKINCOLOR_SUPERPERIDOT1-5 (nyeheheh) - "Peridot"
- SKINCOLOR_SUPERCYAN1-5 (for fun) - "Cyan"
- SKINCOLOR_SUPERPURPLE1-5 (for fun) - "Purple"
- SKINCOLOR_SUPERRUST1-5 (mecha/metal sonic) - "Rust"
- SKINCOLOR_SUPERTAN1-5 (shadow/silver the hedgehog) - "Tan"
* SKINCOLOR_SUPER1-5 renamed to SKINCOLOR_SUPERGOLD1-5, one index for darkest is changed - "Gold"
* SKINCOLOR_TSUPER1-5 renamed to SKINCOLOR_SUPERORANGE1-5, ported properly to the new palette - "Orange"
* SKINCOLOR_KSUPER1-5 renamed to SKINCOLOR_SUPERRED1-5, ported properly to the new palette - "Red"
* new S_SKIN attribute - supercolor - uses an entirely different function to get the names (R_GetSuperColorByName instead of R_GetColorByName)
* a fun little secret - typing "god on" in the console whilst super makes the player hyper (visual only, no sparkles - just rainbow flash) - can be removed if no fun is allowed
-warp checking for invalid map names
I've noticed a bunch of new people getting the "Cannot warp to map 0 (out of range)" error when testing their custom maps. On asking what map name they used, it was clear they didn't use a MAPxx name at all. Sadly it was not obvious to them that other kind of map names are not accepted by SRB2, so I thought it best we make that more clear in-game.
SRB2 now gives you the error "Cannot warp to map \[your input\] (invalid map name)" if you used -warp with a param that is neither a MAPxx name or a plain number.
See merge request !99
Fix R_AddSingleSpriteDef's I_Error messages
Whoops, seems I forgot about this little branch. Basically this fixes how for a character's sprites, a full sprite lump name is displayed instead of just its sprite prefix in the "R_AddSingleSpriteDef: No patches found for [sprite prefix] frame [frame character]" message (unlike when it occurs for non-character sprites), resulting in something like "R_AddSingleSpriteDef: No patches found for PLAYC2C8 frame \^" which does NOT help custom character authors at all as it just confuses them instead. (for the record, the problem would actually with the ^ frame and not the ones displayed after "PLAY")
Oh, and the same problem is also fixed for this similar message: "R_AddSingleSpriteDef: Sprite [sprite prefix] frame [frame character] is missing rotations"
See merge request !95
Spr2 freeslots
Needed for Miles, generally a good idea to have around anyway. Considering Miles uses it without problems, seems to work fine.
See merge request !24
child can be 0 or 1 (or "right" and "left", alternatively)
bbox coord can be 0,1,2 or 3 (or "top", "bottom", "left" and "right", alternatively)
Also added some support for bbox userdata taking "top" "bottom" "left" "right" fields. Not that there's any use for non-node bbox userdata just yet...
for some apparent reason the compiler didn't like the while loop condition edit on its own (it complained about inline failures for P_MobjReadyToTrigger for some reason), so I had to add that extra bit above the while loop... and it was happy again, huh
If you want more specifics, sloped FOFs are to blame it turns out: sometimes the bottom of an FOF wall blocking a segment of an in-level wall column can be considered ABOVE the top part of the FOF there (yikes), and then the dc_y* values go offscreen, and then BOOM
* Press spin in midair to make the shield flash solid repeatedly and make a number of ding noises.
* When the player with a flashing, dinging shield hits the ground, they are sent off in spinning form at the maximum of 2*abs(momz) VS the 3D hypotenuse of momx, momy, and momz.
Software crashes fix... fix
Fixes a typo introduced by merge request !75 that caused upper textures to set the wrong ceiling clipping value when not visible, allowing all sorts behind the walls to be visible. This is most noticable in GFZ2 when the inside of the tunnel section is visible
...probably a good idea to make sure this one doesn't introduce any MORE visual glitches by mistake (again, compare with 2.1.15 if possible)
See merge request !93
Fix for flats with transparent pixels on slopes
This fixes how R_DrawTiltedSplat_8 unintentionally allows the cyan pixels to NOT be considered "transparent" if after being remapped, depending on sector brightness and/or linedef type 606 colormaps, the result of remapping is not palette index 247 (the cyan we typically turn transparent). That is, the original colors from the source flat graphic are not checked, but instead the __result__ of coloring the flat under the respective colormap is checked for "transparent" pixels. This is only a problem for the tilted splat drawing function, not the regular one for non-sloped planes with cyan-pixel-using flats.
I found out about this bug from the issues Ritz was having with sloped 255-alpha translucent FOFs using transparent flats and his custom COLORMAP lump (and later when he applied a linedef type 606 colormap to the FOF) for his custom map. Thankfully he has some workarounds, but this should fix the code-side issues that caused his problems in the first place.
I also fixed stuff with another splat drawing function that's not currently used atm (maybe it will be in the future, if splats themselves are ever enabled again? *shrugs*).
See merge request !92
Skybox rendering offset fix for third person/alt view camera
Fixes the issue reported in this thread: https://mb.srb2.org/showthread.php?t=41729
I dunno if this will negatively affect any existing skyboxes in SRB2's own levels, that said. I tried out THZ2 and CEZ1 with this fix at least but I forgot to compare them with how they are in 2.1.15 so _*shrugs_*
See merge request !94
OS X Makefile build setup
This merge request:
* Cleans up the OS X bundle resource location code and fixes a SIGSEGV and memory leak
* Simplifies and fixes the OS X desktop alert code, closing more leaks
* Adds the MACOSX build flag to the Makefiles, to allow building a binary (but not Mac app yet) of SRB2.
This is intended to make it easier for developers to build on Mac OS X, without having to pull in all of XCode. You can keep using CMake if you prefer.
To test, use `make -C src MACOSX=1 NONX86=1 SDL=1 NOASM=1` for a release build.
Left to do:
* Add a content bundling script to be run after building, and a flag to trigger doing that.
`MACOSX_BUNDLE` maybe?
* Somehow get access to a Mac running PowerPC and figure out how to build a multi-platform binary.
* Add the proper magic to compile using gcc if requested. (Right now, compilation is done via LLVM/Clang)
See merge request !72
Gas jets, fan objects, springs and slopes
Whoop whoop whoop minor bugs that only get noticed due to weird experiments whoop whoop whoop
* For gas jets only: the object's standingslope is ALWAYS null. No drifting down the slope for you.
* For gas jets and fan objects: Now checks whether the player's top is below the bottom of the launcher, instead of its bottom. zdist calculation not affected, since it's signed and okay with being negative by about the height of the player.
* For all 3: the player's standingslope is NULL'd so the player isn't launched off at a wacky angle if they're standing on a slope then walk into the thing.
See merge request !91
Remove i_net.c
The code in i_net.c doesn't actually seem to be used in SRB2. I was able to compile a build without it, and hosting and joining netgames worked just fine (well, as fine as they can with the current state of the netcode...).
The vast majority of code in the file seems to be contained in HAVE_SDLNET ifdefs, and I'm pretty sure SRB2 has never used SDLNET in a public build. The only bit not contained in that block is I_InitNetwork(), which just prints an error and returns false.
Do we really need to keep it around? If not, I say get rid of it. It seems like useless clutter that is just going to confuse people who are trying to understand the source code.
See merge request !73
Re-factoring AA tree code from m_misc.c/m_misc.h into its own files
What the title says. The AA tree-related code now lives in the files m_aatree.c and m_aatree.h. Part of why I did this was to solve this m_misc.h/w_wad.h cyclic dependency problem (involving MAX_WADPATH and AA trees themselves) mentioned in the now-removed comments, another reason was ...only OpenGL uses AA trees at all, why include the relevent structs/functions/otherwise anywhere except where is necessary (which is very few files as it turns out)?
Otherwise, it just looked better on its own rather than mixed with all the other stuff already in the m_misc files. Not really important or anything affecting gameplay at all I guess.
See merge request !82
* When moving slowly, P_InstaThrust at S_SKIN's maxdash forward, and set momz to S_SKIN's mindash upwards. Plays a tok noise (not thok). Hurts enemies/bosses, busts spikes/monitors/all types of bustable blocks.
* When moving quickly... doesn't do anything yet, but WILL do a slide.
Also, P_DoSpinDash is now renamed to P_DoSpinAbility, and CA_TWINSPIN users can bust all bustable blocks on collision too.
* CA_TWINSPIN - you can do it multiple times
* CA_DOUBLEJUMP - your jump height is reduced each time, like in Kirby games. The number of extra jumps once you've left the ground that are available is determined by the character's actionspd.
* Electric sparks coming off entire body instead of bubbles coming out mouth
* Different sounds.
* Different icons.
These sprites are currently local only, but I'll be doing a lot of asset updating this evening since Rob asked me to so it won't be long until you can get them.
Sideways springs, horizontal hog-launchers, perpendicular plungers...
Call them what you like, they're in the code now. And have been for months!
Nev3r uses the hell out of these and I'm fed up of them being <!>'s all over the place, so please have 'em in master so we can update srb2.srb and make things better for all of us.
See merge request !30
* FF_MIDDLESTARTCHANCE - has a 50% chance of starting the spr2 or FF_ANIMATE animation halfway in
* FF_SPR2ENDSTATE - if var1 == S_NULL, don't loop, just stop incrementing the frames. Otherwise, go to the state represented by var1.
The former is just something I did for fun, the latter is something that'll come in handy when porting in new-character-moves.
Setup:
* S_SKIN needs an "availability" line. Set to 0 to have always available, otherwise is assumed to be UINT8 unlockable number. If it's a valid unlockable, its name will be copied over with the character's realname.
* Define an unlockable via SOC or hardcode. If you don't want it visible on the Secrets menu, just set its type to None. Everything else is as normal - you can set the conditionset to whatever, objective, height, nochecklist, nocecho...
* radius - sets the player's radius for that skin.
* height - sets the player's normal height for that skin.
* spinheight - sets the player's spinheight for that skin.
* shieldscale - see http://i.imgur.com/BQ5DhKC.png for justification
R_SkinUnlock defines the circumstances under which a skin is available. For simplicty's sake, I've currently bound it to an S_SKIN variable so I can toggle it easily, but it WILL be replaced with a hook into the savegame system at some point.
* Currently has three tiers of unlock - freebie (forceskin or modeattacking via a loaded replay), Ringslinger Only, and SP/Coop and Ringslinger.
* I don't know anything about netcode so I basically decided to make R_SkinUnlock relevant only under local circumstances, try as hard as possible to stop bad skin info from getting sent to the server, and then admit defeat once the server has the information. If this is a bad choice, please discipline me and show me how to fix it.
* Character Select now checks for whether the character is hidden or not on menu load and does/undoes it based on that info, but will never touch one disabled via SOC. I also used this opportunity to optimise, checking for/filling out charsel pictures instead of doing it later. (It now also includes special casing for a select screen with zero characters!)
* Mode Attack now hides hidden characters in its character select based on SP rules.
Things that still need to be done:
* ForceSkin_OnChange. Is there a graceful way to handle this?
* No obvious skin name conflicts. Add a salt to the names of hidden skins, and then remove it when they're unhidden?
* The gap between Knuckles' skin number and the first custom character anybody adds will be way too obvious. A seperate hidden skin numbering system? Start at 32 and count up from there? There's a few ways...
* If a character select character image is not set, don't iterate every tic - iterate on first image get and then save to the struct.
* A character select screen with only two characters now has special case handling.
* A memory leak in the making has been plugged. (specifically, picname not being Z_Free'd if the loop fails to do so)
* Logic/operation simplification.
Also, some typo corrections and clarity case movements of stuff in other files I've been looking at.
* SF_NOJUMPSPIN - Player's height is full whilst jumping, SPR2_JUMP defaults to SPR2_SPNG instead of SPR2_SPIN, and the player goes into fall frames if they start moving downwards or use their ability.
* PA_JUMP - for jumping (upwards in the case of SF_NOJUMPSPIN.
* SF_NOJUMPDAMAGE - Ala rosy.wad, don't damage enemies, etc when jumping into them.
* SF_STOMPDAMAGE - Just for fun. Ala in Mario, always damage enemies when you land on top of them (your gravity reference, not theirs).
* SF_MARIODAMAGE - SF_NOJUMPDAMAGE|SF_STOMPDAMAGE is reasonably accurate to the Mario games, and might as well be surfaced as such.
Also, a minor change:
* Instead of not spawning the revitem if your SPR2_ is SPR2_DASH, don't spawn it if it's set to 0. This requires the player.dta I uploaded a couple days ago to behave as it was previously.
* Don't get stuck in spindash frames if your maxdash is 0, and don't flash rolling frames if you're on goop.
* Characters disabled through SOC are outright removed. No awkward gap in scrolling - no hint they were ever there in the first place.
* Vertical loop - the character select images are visually continuous. No matter where you are in the chain, you'll always see a hint of the character above or below your current selection in the chain.
* Smooth scrolling - Moto and Prime showed me a gfy from back during 2.1 development where it was super smooth. I didn't make it as slow as that one, but the smoothness was easy to add and the reason it was removed previously - gaps in the character select leading to varying speeds - is no longer relevant.
* SPR2_PEEL, SPR2_SPEE.
* S_PLAY_PEEL, S_PLAY_SUPER_PEEL.
* PA_PEEL.
* Dashmode actually starts charging from runspeed instead of the arbitrarily calculated (normalspeed - 5*FRACUNIT). This just made things easier, honestly, and it's 1 FU of difference compared to the current test case.
- Press spin in midair to stomp directly downwards (losing horizontal momentum), creating a flickering fireball around you.
- No bouncing on enemies, item boxes, etc - just go straight through.
- Hurts other players on touch whilst you're stomping.
- Spawns a bunch of flames around you when you hit the ground.
Also:
- Electric shield's ability now uses different sounds, because I'm picky.
- Now checks whether the player's top is below the bottom of the fan/gas jet, instead of its bottom. zdist calculation not affected.
- mo->standingslope is NULL'd so the player isn't launched off at a wacky angle. (I also did this for springs, since Prime mentioned it was a problem for them too.)
Some slope improvements/fixes (plus P_GetMobjGravity)
Dear Red, I did some things.
* Made the slope flag SL_NOPHYSICS actually have an effect like we wanted to, but didn't get around to implementing yet - activated by setting the slope's linedef flags to have ML_NOSONIC.
* Made downhill slope thrusts proportional to an object's gravity and friction.
* To make the above happen - seperated out the gravity value finding code in P_CheckGravity into a seperate function, P_GetMobjGravity. (p_mobj.c, p_local.h) I also made this function available to Lua.
* Turned those PANIC n console messages (which would inevitably be followed up with a crash, since we're accessing invalid memory immediately after) into a descriptive I_Error.
* Put the SRB2CB type-shimming behind an ESLOPE_TYPESHIM ifdef.
* Removed SPRINGCLEAN-ifdef'd code.
* Cleaned up some eosteric comments.
* NEW SINCE RED +1'd THIS: The teetering code now takes slopes into account pretty well. There are edge circumstances as outlined in commit 9d221f4f3f, but this is unilaterally better behaviour in every way and the teetering code was kind of a mess anyways.
* NEW SINCE RED AND ALAM +1'd THIS: P_ReverseQuantiseMomentumToSlope. Simple function that replaces the inverse angle stuff (which also wasn't using InvAngle, just ANGLE_MAX - angle - which is inaccurate!!)
Current testing files available at /toaster/slptst3.wad and /toaster/gravitytest.lua on the ftp.
I want to do more to the branch like implement SL_ANCHORVERTEX in the near future, but this is probably safe to merge in its current state.
See merge request !77
The whole thing needs a refactor in general, but it's almost 2am here, I need my sleeb, and this fix would probably break something with 2.1 climbing if I made it any more/less (depending on viewpoint) complicated.
Sectorlist traversal
MOM GET THE CAMERA
There's a LOT of code in the source that ended up mixing m_snext (the node for the next thing in the sector's thinglist) and m_tnext (the node for the next sector in the thing's sectorlist), so I renamed the following:
* m_snext ==> m_thinglist_next
* m_sprev ==> m_thinglist_prev
* m_tnext ==> m_sectorlist_next
* m_tprev ==> m_sectorlist_prev
Then, I changed all the instances where the code was trying to go m_thinglist_next on a mobj's touching_sectorlist (which would've just gone to the node for the next thing in the same sector, instead of the node for the next sector for the same thing). Notable samples:
* FF_SHATTER blocks now disappear the moment you go into their sector. You still can't give FF_SOLID to them because in that case they will still stop you if you never enter their sector at all (ie - clip on corners), but having them nonsolid no longer allows you to phase through entirely without busting them (which was the whole downside of making them intangible in the first place).
* You can now bump into multiple Mario blocks at a time, even if you're not exclusively in their sector.
* No more getting randomly stopped on the edges of bouncy FOFs.
* Landing on polyobjects might behave a little more consistently at the edge of their host sector.
* Teetering did a SHITTON of code that basically never got executed, and then had directly-blockmap-accessing code as a backup. The code was activatable by replacing the m_thinglist_next with m_sectorlist_next, but it behaved SUPER differently from what we're used to with teetering (if the player mobj's edge was JUST off the edge of a platform, you ended up in teetering frames - even if it looked like you could stand) so I ended up removing that section entirely.
Any objections?
See merge request !85
Fixes and changes related to the act of setting up a level (in other words, setup fixes)
Changes made in this branch so far:
* a REJECT lump of zero length (NOT to be confused with a REJECT lump of non-zero length with all-zeros, just to clarify) should no longer cause problems with netgames and otherwise. The game now checks if the lump exists, has the right name, and length is not zero - if it fails any of these, the REJECT lump is not loaded and P_CheckSight won't be allowed to use it. This means ZDBSP (no reject) should be safe(r) to use now!
* there's now a simple devmode-only message (requires "Setup" mode) if a sector is found to have no lines at all during setup. It's a far cry from the plot to I_Error the game I once had for that unsusal scenario, but such a level still works anyway so whatever.
See merge request !87
FF_REVERSEPLATFORM clipping
Ran into an issue whilst testing out one last feature (there's always one more...) for flat_alignment_revamp. This is a backported fix.
The bug was such that if you're falling through a platform with FF_REVERSEPLATFORM and not FF_PLATFORM, you'll be pushed downwards such that your head is against the bottom of the FOF. This just checks momz is greater than zero if it has FF_REVERSEPLATFORM to make sure it's okay to set ceilingz. (OR the alternative in reverse gravity.)
No test map because this was originally done for internal. Instead, test it on the other branch's test map.
See merge request !83
* NAMEcL refers to a frame which is seen for the entirety of an object's left side.
* NAMEcR refers to a name which is seen for the entirety of an object's right side.
* NAMEcLcR does both sides.
* Having just a NAMEcL requires you to fill in the opposite side either with NAMEcn where n is 1 and 5 to 8 OR fill in with a NAMEcR
* Switches down the centerline of the object instead of at the ANGLE_202h interval for normal sprites.
* Characters were selected for 1) ease of use and 2) not getting in the way of adding support for zdoom's totally bananas 16-way sprite system at a later date if we so choose
Software crashes fix
This branch SHOULD fix the many crashes people have reported lately that all point to the software renderer. Simply put, the software renderer allowed stuff to be drawn out of the screen even though that wasn't safe, and even the existing checks to prevent that didn't work.
If you saw me worrying about the sky HOMs I discovered in AGZ earlier in the commits for this branch, don't worry - it turns out that issue already existed in 2.1.15's srb2win.exe (and probably srb2dd.exe too) anyway, the changes in this branch didn't cause them. Hopefully nothing else broke then.
See merge request !75
Also, the teetering angle on slopes is now FRACUNIT/2 because there's literally no way to stand still on a slope that steep unless it doesn't have physics.
This means the current skewing-by-default effect isn't changed, and OpenGL's equivalent code doesn't have to be touched since apparently it was already like that.
This should mean that maps built with ZBSDP (no reject) should have less or no problems in netgames compared to the standard ZenNode maps now, hopefully. =)
note: once this is merged into internal, you should probably remove me from "programming assistance" so i'm not duplicated for no clear reason. unless you want me to slowly take over every section in the credits >:3c
"frontsector" in this part of the code isn't actually the polyobject's sector for back-side polyobject segs, it's the in-level sector the polyobject as a whole is being rendered in it turns out.
Red apparently left in code for single-sided linedefs to NOT skew their midtextures ...but it doesn't work because it doesn't stop the skewing code from running instead, regardless of whether Effect 1 is on or not. If it's decided single-sided line midtextures shouldn't do this though, the non-skew code could just as well be thrown out lol (or something else I guess?)
When I first wrote this, I thought the .h file that contained a function declaration needed to have the same name as the .c file the function was in. Now I know that's not the case, off to p_local.h with you.
Two interesting points of note:
* The touchspecial sector flag seems to actually do its job now.
* Detection of sectors with polyobjects in seems to have done this incorrectly, but this doesn't mess with anything about touching the polies themselves so it seems to really only handle edge cases where the polyobject was too close to the border of another sector (which would've likely made rendering glitches anyways).
* There was a whole swathe of teetering code that was basically never run properly because of this mistake. I did a simple fix at first, but you started teetering whenever you were slightly less than your radius away from a sector's edge, which was completely different and undesirable behaviour. Instead, I cut out the code that was never running, and just left the hacky method in instead since it was more accurate to what we want in general.
Issue was caused by attempting to traverse the sector's thing-touching-list across all the things in the sector (which would inevitably have the same sector as the first node in mobj->touching_sectorlist) instead of traversing the thing's sector-touching-list (which has the same thing but different sector references).
I wonder how many times AJ copypasted this code with absolutely no idea why it wasn't working properly. I'll figure that out tomorrow, maybe set up some compiler macros so this mistake is never made again. For now, I must sleeb.
Behaves ALMOST as you'd expect. It gets the z position of the slope at the player coordinates when it comes to the sectorlist check (which is first), though, so there's a few oddities that are amplified with steep slopes:
* If the slope's sloping away from you at a steep angle, you might not be able to step down onto it, but you won't teeter (because it's at a step-down-able height if it extended to directly beneath you)
* If the slope's sloping towards you at a steep angle, you might end up in teetering frames when you're able to step down onto it (because it's NOT at a step-down-able height if it extended to directly beneath you)
HOWEVER, it would be pretty obnoxious to hold back code which is functionally superior in every way otherwise, and it doesn't really seem like there's a good way to get that checked tbph
* If there's items in it set the FOF's floor and ceiling flats to that of the backside sector's ceiling
* Otherwise, set them to that of the backside sector's floor.
Otherwise, the flats do not change.
This allows for SMW style blocks which are much darker when empty then full on all sides.
* Only change texture when stationary or moving down, for additional fidelity to source material. This has zero overhead, and actually might REDUCE lag in some circumstances... my nitpickiness wins again.
* Apply ML_EFFECT1 to it to make it invisible and intangible (removing (FF_SOLID|FF_RENDERALL|FF_CUTLEVEL) from it) from every side except the bottom. Becomes visible and tangible when it's hit once. Might fuck over players in mp, but really our Mario blocks are so high in the air (and we'd need to update Pipe Towers to take advantage anyways) that they're super unlikely to get a kill this way
* Checks for the Brick Block have been switched over to the presence of FF_SHATTERBOTTOM instead of checking for the source linedef's flags every time.
For the object...
* Tag via its angle field
* Number of objects to spawn per tic around it via its z field, if zero then just spawn at center
* Is flipped if given MTF_OBJECTFLIP.
Now there's a linedef type 15!
* Tag is tag of object(s!)
* Object type set via concatenation of frontside textures, MT_PARTICLE is default
* The length of the linedef is the radius the particle is spawned out (zeroed if z field is 0)
* Frontside x offset is speed upwards
* Frontside y offset is number of degrees to turn each tic (zeroed if z field is 0)
* Frontside floor and ceiling heights are the heights in which the particle is bound through some fun mathematics and/or BDSM
Of course, not every story has a happy ending.
* A_ParticleSpawn no longer accepts objects via its var1 because of how specialised it's gotten. Considering it can be set via abuse of actor->cvmem, I don't consider this an issue. Maybe you might disagree.
Also updated any relevant project files that I can think of to include the new files, as well as the makefile of course. Some of the other project files haven't been touched in years so I'll leave those alone ...unless someone objects
Linedef type 4 now works as follows.
* Frontside x offset is dash speed.
* Effect 4 flag doesn't center the player. (same as before)
* Effect 5 flag sends them off in rolling frames. (as a result there is only one speed pad sector type now, not two)
* Frontside upper texture is sound to play on launch, defaults to sfx_spdpad when not given
Linedef type 14 (Bustable block parameter)
* Applied to one of the linedefs of any FOF's control sector
* Concatenation of frontside textures is MT_ object type to spawn, defaults to MT_ROCKCRUMBLE1 if not present
* Sound played when being busted is object type's activesound
* Frontside x offset is spacing (in fracunits) of spawned particles, defaults to 32<<FRACBITS
* Frontside y offset is the fuse of spawned particles in tics, defaults to 3*TICRATE, if set to -1 assume infinite lifetime
* Effect 1/Slope Skew flag makes particles fly out
Linedef type 250 (Mario Block):
* No Climb flag turns it into a brick block (busts when hit from the bottom, player hits their head/fist/whatever, no more upwards momentum)
* Actively impede your acceleration
* Make your animation speeds faster whenever you're moving (to give off that Looney Tunes effect)
The former change is something that was present in the few low-friction circumstances in the classics, and makes low-friction surfaces more of an active challenge. The latter change is just something I did for fun to more clearly communicate that things are different with the physics here.
High friction surfaces DO NOT involve any of this, since it ended up basically cheesing their existing gameplay.
*Friction linedef effect is now -
1) controlled by x offset instead of length - offset of -100 is maximum iciness, offset of +483(!!!) is the maximum sludginess BUT things are scaled such that +100 is about the maximum sludginess any reasonable human being would want in a level, 0 is ORIG_FRICTION)
2) not reliant on a sector special to function (can be applied solely by tag to in-map sectors or solid FOF control sectors)
Basically this makes sure numwadfiles is updated before loading the SOC/Lua scripts, so if a Lua script calls COM_BufInsertText with the contents "addfile scr_mysticrealm.wad" it can't overwrite the last written wadfile slot! Not that COM_BufInsertText really should be used like that to begin with
*Didn't take into account object scale
*Doubled force when on the ground (ignore what the comment of the line I moved says, it was relevant for slopes...)
This also led to a mistake with slopes, where I was double-multiplying by the gravity constant to get half (because of a quirk of numbers...)
Also took the opportunity to nuke or otherwise neuter a bunch of Kalaron's bizzare ramblings (most are questions which have long-been answered by Red's efforts) at the same time.
*The No Physics flag now works (Red, you might want to doublecheck this to see whether I haven't missed any eosteric stuff out). Going downhill is a little bumpy, and I'm not sure whether that's good or not. Someone help me out here?
*The SRB2CB typeshims are now behind #ifdef ESLOPE_TYPESHIM instead of #if 1 for easier disabling.
*Slopes' downhill thrusts are now scaled with regards to object gravity. This is actually untested in gravities other than normal and reverse normal but it's one line which can be easily reverted in that circumstance. I also checked with MI to make sure this is how it's calculated elsewhere, so fingers crossed this doesn't cause any edge cases.
*As a consequence of the above point, there's now a function in p_mobj.c/h that returns an object's internal gravity - seperated out from the logic of P_CheckGravity, which really didn't need to be so monolithic. Multiply by global gravity to get the thrust. This should probably be available to Lua somehow, but I have absolutely no idea where to start with that. Wolfs, maybe?
Non-comprehensive test file available at /toaster/slptst3.wad on the ftp.
Do we really need to keep it around? If not, I say get rid of it. It seems like useless clutter that is just going to confuse people who are trying to understand the source code.
* -lSDL2_mixer is already added to SDL_LDFLAGS by default, unless NOMIXER=1 is set
* -DSDLMAIN should also be added to OPTS by default for MINGW=1 builds, unless NOSDLMAIN=1 is set
NiGHTS hotfix
Fixes the following issues relating to playing as NiGHTS Super Sonic that apparently popped up between 2.1.14 and next (mostly due to the changes to SRB2's trig stuff it seems):
* Super Sonic drifts to the side at some angles around an axis, and is unable to go directly upwards or downwards as a result
* Drilling to the side when on the ground causes the drill sound to constantly restart
* CEZS's start not actually being lined up properly with the first axis means the player is not able to go backwards along the track (because the player is not actually aligned with the track properly, preventing you from touching the attached line transfer)
* trying to hug some walls such as the tall wall before the library section of CEZS allows Super Sonic to go through them
These fixes needs proper testing before this branch can be merged in, in case they accidentally break other things as a result or something.
See merge request !71
Basically I kind of worked around any potential trig inaccuracies by not using the player position directly for setting momx/momy. This way, if player->angle_pos == player->old_angle_pos, momx/momy are zero
Demo replay fixes
Changes made/bugs fixed in this branch:
* Replay camera is now controllable when climbing (https://mb.srb2.org/showthread.php?t=38668), and in waterslides
* localangle (read: the angle between you and the camera, I think) now doesn't change during demo replays in most situations, unless the player is in analog mode. Exceptions include zoomtubes and NiGHTS super
* Replay camera now doesn't act silly if the player is in analog mode (assuming you also recorded it in that mode to begin with, anyway)
See merge request !66
DO NOT MERGE THIS INTO THE INTERNAL REPO. This is a temporary 2.1.15 only fix. This commit allows an optional boolean for tan(), which when true will automatically shift angles by ANGLE_90.
the most common condition (correct drawing) shouldn't be last, however it can't be first without making the conditions longer anyway.
it's a nitpicky thing, but this is the renderer we're talking about here.
i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs i hate FOFs
Previous overflow fix resulted in extra tall FOFs disappearing up close (see: ERZ1's elevators at start)
This works "better" in that only some lighting bugs and really really finicky visual glitches show now. I give up trying to totally fix this stuff dfsdfgdgf
One more name in the credits
I probably messed up by making toast_credits based on master instead of next. If that's blocking, just delete this branch and I'll re-do it. It's a single line, though - shouldn't exactly matter so much.
Could probably stand to be merged into Internal as well, since I hadn't actually worked on any textures when we'd updated the credits there.
See merge request !69
Fix portal and plane/sky interaction
More portal-related fixes:
* Fixes rendering issue 4 from issue #21 (Slope planes render with wrong height values when visportals are visible on-screen)
* Fixes sky rendering through portals, so that the sky you see through each portal is what you'd expect to see if you were actually there. Easiest way to see what I mean is through sky 22's planet, in a map with portals at 90 degrees to the other sides respectively (the example map on the wiki for ld40, for instance).
See merge request !65
The idea is for the layman Lua user to understand better what range of values to use for mobj types, states, sfxs, player #s etc. Additionally, mobjinfo/states/sfxinfo/hudinfo tables all now have actual bound checks when accessing/editing them. Yikes, why didn't they have any before?!
Slope fixes
This branch fixes the following slope-related physics and rendering bugs:
* Rings in multiplayer stages respawning inside slopes (even despite being able to spawn ABOVE them on map load)
* Player starts spawning players inside slopes
* Elemental flame trails not appearing if a player spindashes UP a slope; see issue #21
* Dying players "jumping" off slopes to the side if they were previously standing on one
* Some issues with FOF slope rendering
* Various issues with sprites displaying through walls adjacent to slopes
Other features added:
* Objectplace now supports slopes (this is Inuyasha's doing)
* Automap in DEVMODE now supports slopes (my doing)
Just making this merge request now rather than later, ~~in case I decide not to make any more fixes for the time being~~ (this branch doesn't seem to want to die lol), and so we can get these merged in as soon as the code's all been checked over.
See merge request !50
xorshift* PRNG
This needs testing to ensure I didn't mess anything up switching function names around.
Our PRNG sucks. This is probably obvious. I wish I had known better at the time I implemented it, but oh well.
The replacement is an xorshift* PRNG variant with period 2^32 - 1 (meaning that the PRNG state will loop after four billion calls ... that's not likely to happen), versus the old PRNG's period of about 2^22 (?). The output is also much more random and less predictable; the old PRNG would fall into a predictable loop of output after about 4000 numbers were generated, which isn't much.
The PRNG here also outputs numbers as fixed point from [0,1) (that's 0 to FRACUNIT-1, in other words) instead of single bytes at a time. This makes it much easier to calculate things for, say, P_RandomRange and P_RandomKey. A new macro, P_RandomChance(p), is now in use that returns true _p_ percent of the time, where _p_ is a fixed_t probability from 0 (0%) to FRACUNIT (100%).
This doesn't affect netgames at all; the code for seed saving and restoring is identical (aside from a check to prevent seed being set to 0, which breaks xorshift PRNGs). Demos break, but A: _duh_ and B: they're already broken by all the changes to physics to accommodate slopes.
P_Random is deprecated in Lua, as the function was renamed to P_RandomByte. Aside from that, nothing special.
See merge request !64
* add skidtime, which we forgot before 2.1 release apparently
* change tics from INT16 to INT32
* change eflags from UINT8 to UINT16
* change actionspd/mindash/maxdash from INT32 to fixed_t
Until we use something besides Native MIDI to play
back MIDI music, MIDI volume changing is disabled
since it causes way too much of a damn headache.
(It's not even our fault, it's fucking MS.)
Fix for teetering on PolyObjects
So... somebody goofed and didn't realise PolyObject sectors could be added to the sector node list for each object (which is referenced by mobj->touching_sectorlist), via their linedefs if they are nearby the player (yes, PolyObject linedefs are special and get to move about the level). As it turns out, this allows even INTANGIBLE PolyObjects to make you teeter in a seemingly inexplicable way.
What is happening is that PolyObject sectors, when they are added to the mentioned lists, are then checked under normal sector teetering conditions - if the player is above the floorheight by 24 FUs, you're officially teetering unless stated otherwise. The actual PolyObject teetering code can't help you here if the conditions are right, especially if they're taller than 24 FU in height.
There are a number of things wrong with the teetering code in general that I'd like to sort eventually, but at least now teetering on PolyObjects is fixed at last ...right? Please check the branch out if you can to check this, obviously.
See merge request !54
Fixes for patch scaling and V_FLIP usage
The following issues are fixed by this branch:
* a patch using both scaling and V_FLIP does not appear in the "correct" place on the screen. Thanks to LJSonic for pointing this out to me on 'fun
* Scaled and/or V_FLIPed patches wrap at the left/right screen edges even though they're not supposed to. V_FLIP patches at these edges may also crop the wrong side of the patch if they're at the right edge.
See merge request !60
Some fixes for portals
Specifically the following things are fixed in this branch:
* a memory leak resulting from not clearing away clipping-related arrays each tic you view a portal
* a very specific crash to do with portals sometimes (unintentionally) using a hack on drawsegs that don't actually belong to them ...which results in a crash if the drawsegs in question have midtextures. I reported it on the MB a year ago, with a test map included there: https://mb.srb2.org/showthread.php?t=38199&page=4#79
* another specific crash to do with mirrored (horizontally flipped) sprites that are scaled, particularly when you cover up the left edge of them via portals at the least. Needs more testing to be absolutely sure this is fixed, and is also reproducable in the test map linked in the post above
May be fine to merge changes into master too, I don't really know exactly
See merge request !42
Camera fix
This fixes the third person camera being silly around intangible PolyObjects, particularly the fact they can affect the camera's floorz and ceilingz even though I see no reason why they should do so.
Also a good reminder that POF_SOLID is the same as POF_CLIPLINES and POF_CLIPPLANES combined, which is probably how this issue came about to begin with. Can't say that with certainty of course.
See merge request !57
P_RandomChance is now a macro for something that should happen a
certain percentage of time.
P_SignedRandom was moved to a macro. Nobody cared.
# Conflicts:
# src/p_inter.c
This actually passes most diehard tests, as opposed to the old RNG.
It's also similarly fast.
Internally the PRNG generates a fixed point number from [0,1) now,
which makes P_RandomKey and P_RandomRange much easier to
calculate. P_Random is just a simple shift, as well.
Also, the lack of floating point math in P_RandomKey and
P_RandomRange now is probably for the best.
Also makes comptime.bat work with git if able.
Development builds will now show the branch and the SHA1 hash of the revision. Also been tested to work with subversion, where it displays "Subversion r####". You know, just in case.
There is a caveat to this: The first time EvalMath is used, a
deprecated function warning will be shown to the user that tells
them to use _G[] instead.
This reverts commit 9d36cf37bd.
This appears to fix a few holes that have been known to appear with FOF slopes sometimes, dunno how they actually came about exactly but this apparently sorts them out
Lua sector lines
Adds support for "sector.lines" in Lua, an array containing all the linedefs in a particular sector variable:
#sector.lines returns the number of lines in the sector.
sector.lines\[ _i_ \] (e.g. sector.lines[0], sector.lines[1], sector.lines[2], etc ....) gives you individual linedefs in the sector. If the number you supply is equal to or greater than #sector.lines, this returns nil.
Test script for your benefit: (see comments)
Type "luatest" in console in any level and you'll get a few print messages that tests these features for sectors[0]
See merge request !32
SOC_**** lump name support
Exactly what it says on the tin: lumps with "SOC_" prefix now are read as SOC lumps like with MAINCFG/OBJCTCFG. Go nuts.
As a bonus, I've changed things with SOC lump detection so MAINCFG, OBJCTCFG and the new SOC_**** lumps are loaded in the order you find them in WAD files (rather than an arbitrary load-MAINCFG-then-load-OBJCTCFG thing as before). All of these are still loaded after Lua scripts though, mind.
See merge request !38
Lua video lib expansion
New video/drawer library functions for hud.add to use:
v.width() and v.height() return the screen width and height respectively (in other words you get the screen resolution), while v.renderer() returns the string for the renderer used ("software", "opengl", or "none").
Possibly add more stuff later, but for now these things at the least can be merged in next
See merge request !40
Add PlayerSpawn hook to Lua
I don't know how I did this but I did. Something about staring at code from 3AM till 5AM...
Here's a test script too:
```Lua
addHook("PlayerSpawn", function(player) player.health = 99 end)
```
See merge request !48
Version constants for Lua
Pretty simple thing. Allows scripters to use VERSION, SUBVERSION, and VERSIONSTRING to check the game's version and potentially futureproof scripts. Have tested and confirmed working on my end.
See merge request !55
BACKPORT: removal of music slots
Relevant commits cherry-picked. Basically everything except the internal music track name switches.
See merge request !43
The funny thing is you really can't see ANY change here unless you have a sloped FOF intersecting a sector floor/ceiling (and a second FOF on the other side), which has other problems anyway lol
BACKPORT: FF_ANIMATE simplistic state animations
this is a lot more complex due to the need to remove the dispoffset related code as well as a lot of the redefinitions; combined with the code changes due to the sprite2 system in internal master.
~~BEFORE ACCEPTING THIS: get sryder to look at and fix any possible brokenness with OpenGL MD2s~~
See merge request !45
Fof flag change hotfix
This fixes rendering issues caused by changing FOF flags mid-level via Lua or linedef type 445. Everything else that toggles FF_EXISTS already had this fix it turns out.
Not sure if this is safe for master too, could someone check that for me?
See merge request !53
This fixes how removing certain flags (such as FF_EXISTS) from FOFs can cause HOMs on walls bordering their target sectors. Also fixes how the force-FOF-to-vanish linedef special can leave behind the FOF's shadow
Fix chain launching
Basically you're not allowed to launch off a chain the frame you touch it anymore.
Coincidentally the changes here allow you to actually use PF_*STASIS in a Lua script now and have it work as you'd expect it to (it lasts for a tic).
See merge request !49
cpuaffinity/sdl_mixer changes
Hopefully this will alleviate SDL2 sound issues.
If not, hopefully this will give us info on what the hell is going on.
See merge request !51
(No, game, you can't allocate a map header for the credits, why were you doing that before and how did it not break anything??)
(cherry picked from commit e1f9a01229)
Use whatever names you want for your music. So long as you prefix the lumps with O_ or D_, it doesn't matter anymore.
DISCLAIMER: Linedef type 413 (change music) and Lua scripting is not tested.
(cherry picked from commit 025ca413a2)
# Conflicts:
# src/p_user.c
Travis-CI builds
Merge support to build SRB2 for Linux system via Travis-Ci
This will build SRB2 with GCC and Clang to make sure we do not break Linux/GNU builds
See merge request !41
Monster Iestyn's Miscellaneous (netplay-compatible) changes
Just cleaning up some unused or unnecessary things left in the source code, see the commits for exact changes made if you like.
May add more stuff to this branch later, there's no rush really.
See merge request !39
Diagonal spring rings tweak
If you didn't know before, those special placement ring lines for diagonal springs only use multiples of 45 for their angles in-game. In other words, they only face any of the 8 basic cardinal directions (N, S, E, W, NE, NW, etc). Considering that springs themselves don't follow the above behaviour, you can probably work out that's a bad thing.
This branch changes that of course, if you couldn't guess from context. Diagonal spring rings can now be placed with any angles like most thing types already could!
See merge request !37
some of the mess in here really bothers me
(cherry-picking this commit of mine from next since it only fixes a small oversight with compiling and adds a comment)
the screen texture does not need an alpha channel.
the fact that it had one made OGL copy the topmost pixel of the screen texture's alpha channel.
which, naturally results in the screen becoming partially transparent and letting you see the working texture in the background.
g_game.c: In function 'G_CheckDemoStatus':
g_game.c:5588:22: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
if (!modeattacking == ATTACKING_RECORD)
^
Fixed one of Red's mistakes, and used a different struct variable for dashmode. This needs to be changed though, because everything will break if someone loads a circuit map.
This is not how you use pushlstring! This is actually sending uninitialized memory to Lua, which is making scripts have inconsistent results (duh?)
c/o JTE: "Tell Red they're a doofus."
Admittedly I knew of this particular method from the start but wanted to avoid it in favour of a less-hacky looking method of getting sector.lines' size ...but there was none to be found at all.
Coloropposite hotfix
Quick fix to prevent ColorOpposite(MAXSKINCOLORS) or higher input from giving results out of the actual array's bounds. In other words, preventing it from giving you nonsense values or something.
I created the function for Lua to begin with, so clearly this is 100% my fault once again. Welp.
See merge request !31
Objectplace reallocates the mapthings list to add one more mapthing. By itself there's no problem with this.
But, mobj->spawnpoint is a pointer to the mapthing's location in the mapthings list.
So by reallocating the mapthings list, all references to mobj->spawnpoints point to freed memory.
... Oops.
Now when objectplace reallocates the mapthings list it actually corrects the locations of all mobj's spawnpoints to point to the new list.
Hooray, you can use NiGHTS objectplace again if you really want to.
Objectplace reallocates the mapthings list to add one more mapthing. By itself there's no problem with this.
But, mobj->spawnpoint is a pointer to the mapthing's location in the mapthings list.
So by reallocating the mapthings list, all references to mobj->spawnpoints point to freed memory.
... Oops.
Now when objectplace reallocates the mapthings list it actually corrects the locations of all mobj's spawnpoints to point to the new list.
Hooray, you can use NiGHTS objectplace again if you really want to.
The point here is ColorOpposite(MAXSKINCOLORS) would have given an actual result of its own since MAXSKINCOLORS & MAXSKINCOLORS is still MAXSKINCOLORS. This shouldn't happen though, as both Color_Opposite[MAXSKINCOLORS*2] and Color_Opposite[MAXSKINCOLOR*2+1] aren't defined.
Note: polyobj_t's "translucency" is apparently a SIGNED integer, so in theory it's possible to get polyobj flats to use the "spanfunc = splatfunc" line using negative values. If this is not meant to happen, this should probably be fixed asap
Conflicts:
src/f_wipe.c
Also makes comptime.bat work with git if able.
Development builds will now show the branch and the SHA1 hash of the revision. Also been tested to work with subversion, where it displays "Subversion r####". You know, just in case.
Also makes comptime.bat work with git if able.
Development builds will now show the branch and the SHA1 hash of the revision. Also been tested to work with subversion, where it displays "Subversion r####". You know, just in case.
more detailed description: vissprites now store dispoffset in a separate variable from (y)scale, and uses it to influence order between sprites without it affecting the actual drawing of the sprites themselves
Rob request player anims
[21:44:35] <@Rob> As far as I can tell the player-anims that I requested work
[21:44:45] <@Rob> That can probably be merged at this point
See merge request !22
Monster's miscellaneous meddling
A miscellaneous assortment of code-cleanup and other changes, plus fixing up SRB2's tangent array so it behaves more as expected (especially on the Lua side).
More specific details of the changes:
(MUST-HAVE CHANGES)
* `finetangent[]` has been entirely redone in the same manner as finesine/finecosine.
* Lua's tan() function shifts `finetangent[]` results by `ANGLE_90` to get what you EXPECT it to return (e.g. `tan(0)` actually returns 0 now). This means finetangent itself doesn't need to change its general arrangment, this only affects Lua specifically.
* Lua's tan() function now also doesn't go out of `finetangent[]`'s bounds at all. Before, `tan(ANGLE_180)` through `tan(ANGLE_MAX)` and such would just give you values unrelated to the array in question, which was clearly a bad thing.
(CAN PROBABLY LIVE WITHOUT?)
* `finecosine`'s definition moved from r_main.c to tables.c.
* Created `P_CheckTimeLimit` for `cv_timelimit`, much like `cv_pointlimit` has `P_CheckPointLimit`. It cleans up `P_UpdateSpecials` a bit at least.
* Some code cleanup relating to translucency maps - these are kind of unimportant, I was about to stop `FF_TRANSMASK` being used everywhere, but this was apparently a bad idea so I backtracked a bit.
* Re-added `_MSC_VER` check around MSVC-specific code in doomtype.h, in case it wasn't defined (and `__OS2__` was). Also left a comment there regarding `__BYTEBOOL__`.
* Fixed an apparent copy+paste goofup in `joyaxis_cons_t[]` for the Wii-specific code.
See merge request !10
Fix md2s
shoutouts to MI for breaking them accidentally
I was about to just commit this straight to next but it's the perfect reason of why code review is beneficial and I'd be a hypocrite to point that out and then skip the process
See merge request !28
Reduced palette
You guys should know what this is by now. If you don't, you really need to catch up. =P
We should check with toaster and others involved to check this thing is actually ready to go though, the number of changes to the palette itself over the last year has been absurd.
See also http://git.magicalgirl.moe/STJr/SRB2Internal/issues/8
See merge request !13
Apparently all parts of the source code that require GLPatch_t are themselves used only if HWRENDER is defined. Do I need to say more?
Not sure if this will fix Wolfy's latest problem or not though
Basically, Wolfy's linux (non-CMake) compiling apparently fails here, and config.in.h actually lives outside of the sdl folder. Blame a particular someone for blindly copy+pasting these includes in this file without considering the consequences when adding support for CMake everywhere.
Apparently all parts of the source code that require GLPatch_t are themselves used only if HWRENDER is defined. Do I need to say more?
Not sure if this will fix Wolfy's latest problem or not though
Basically, Wolfy's linux (non-CMake) compiling apparently fails here, and config.in.h actually lives outside of the sdl folder. Blame a particular someone for blindly copy+pasting these includes in this file without considering the consequences when adding support for CMake everywhere.
Use whatever names you want for your music. So long as you prefix the lumps with O_ or D_, it doesn't matter anymore.
DISCLAIMER: Linedef type 413 (change music) and Lua scripting is not tested.
1up icons were spawning their overlays off sync with each other so the face icon was showing up during static. Now they don't.
(They'd do this in 2.1 too if you have a custom WAD added that doesn't have an overlay sprite, and you use it in multiplayer alongside a character that does.)
Dispoffset changes
Dispoffset now works in OpenGL, and the feature has been optimized so high dispoffset values don't cause sprites to be distorted anymore.
See merge request !12
* SPR2_JUMP and SPR2_SJMP are now the jump sprite sets for spin chars
* SPR2_SPNG and SPR2_SSPG are the new sprite sets for spring up anims (instead of JUMP/SJMP)
* S_PLAY_JUMP and S_PLAY_SUPER_JUMP are now the states for spin char jumps
* S_PLAY_SPRING and S_PLAY_SUPER_SPRING are the new states for spring up (instead of the "JUMP" states)
* PA_JUMP is now PA_SPRING (jumping anims are lumped with PA_ROLL)
Compiling errors fixed in this commit:
* Various cases of mixed declaration and statement code
* Implicit declaration of slope functions (read: you forgot to put "include "p_slopes.h" in MORE than a few places)
* an odd case of a bad fixed_t to float typecase, cause by using P_GetZAt directly inside FIXED_TO_FLOAT
* a few minor cases of bad unsigned-signed comparisons
* no prototypes for some of the new slope functions. For goodness sake Red, this is basic stuff!
This works fine in single player on vanilla builds, multiplayer is untested. This might not be the best way to handle the ability, so modifications for efficiency/sanity might be necessary.
It's a lot nicer in general, honestly. I think a couple bugs with custom monitors respawning got fixed in the process.
Note that a monitorgfx.wad is needed if you want to see things besides <!>s for monitors, due to graphic changes.
Actions tweaks
This just rewrites the action A_SetTargetsTarget currently, dunno if I'll bother to tweak any more actions in the near future \*shrugs\*
That said, PLEASE check whether the action works properly before accepting the merge. It's been a while since I last did anything with this branch, so I forget entirely whether I tested it or not.
See merge request !27
more detailed description: vissprites now store dispoffset in a separate variable from (y)scale, and uses it to influence order between sprites without it affecting the actual drawing of the sprites themselves
Note: polyobj_t's "translucency" is apparently a SIGNED integer, so in theory it's possible to get polyobj flats to use the "spanfunc = splatfunc" line using negative values. If this is not meant to happen, this should probably be fixed asap
Compiling errors fixed in this commit:
* Various cases of mixed declaration and statement code
* Implicit declaration of slope functions (read: you forgot to put "include "p_slopes.h" in MORE than a few places)
* an odd case of a bad fixed_t to float typecase, cause by using P_GetZAt directly inside FIXED_TO_FLOAT
* a few minor cases of bad unsigned-signed comparisons
* no prototypes for some of the new slope functions. For goodness sake Red, this is basic stuff!
Slopes and stuff
Adds support for slopes, slopes on FOFs, slopes on translucent FOFs, slopes on FOFs with holes in the flat, slope physics, dynamic slopes, vertex slopes, dynamic vertex slopes, and a ham sandwich to the game. Only for software mode right now, though. (OGL still gets the physics and the sandwich.) Some things still need to be done, but for now this can be merged in to be finished later.
Please make sure nothing in the vanilla game breaks before giving the thumbs up for this merge.
Since this doesn't merge automatically, if the code review turns out positive and nobody else has done it, I'll handle the merging.
See merge request !22
To be specific: when a sector had a sloped ceiling and a colormap was
placed above it, the colormap wouldn't fill anything above where the
ceiling height is at the sector's midpoint. This is fixed.
Oops. (Minor animation bugfix I forgot.)
Apparently I pushed this one commit to GitHub instead of SRB2Internal before the branch was merged...
Oops.
See merge request !8
*player->health (formerly the "HUD" health) is now to be known as player->rings, and now acts as the player's actual ring count
*player->mo->health (formerly rings + 1) is now always 1 when alive, regardless of ring count; if player with rings is damaged, this is untouched
Damage in normal SP/Coop gameplay has been tested and still works fine; still a lot of mess to clear up though
Tag damaging probably is broken now, I'll fix this later
Tweaks to R_PointToAngle and R_PointToAngle2
Exactly what it says in the title! See commit description for more information on what I did, since I'm too lazy to write it all up a second time. =P
Could someone check that these changes don't cause anything else in particular to go wrong in the game or source code? I haven't checked myself that much yet, mostly because I totally forgot about this thing until now, lol.
See merge request !19
Polyobj setup fixes
If you're wondering why ERZ2 crashes lately, yes, it's my fault once again it turns out! Ideally we shouldn't have loose spawn points or anchors without an actual PolyObject to go with them in the first place, but this fix re-adds the safety check that prevented them from crashing the game before.
If it wasn't clear already, this fix is rather important, so please get in asap.
See merge request !7
In Doom there was a random chance of enemies either being stunned (painstate) or instead just deciding to attack you (seetstate), but in SRB2 painstate is ALWAYS used beforehand.
New player animations (Updated player.dta Sonic)
Adds support for several completely new player animations, mostly for Super Sonic.
See merge request !5
Note: Before this change, North and West directions would be returned as ANGLE_90-1 and ANGLE_180-1. This caused the pusher polyobjects in THZ2 to slowly move sideways as a side-effect (and probably caused similar bugs in the past too, these functions have barely been touched in a decade it turns out.)
This commit makes Super floating players break into
a normal walk again when they hit the floor, instead
of keeping their float animation on the ground.
Goo Water (THZ Goop) adjustements
At Nev3r's request:
Adjusted goop so that you spend less time bouncing around in it. The goop will become a walkable surface with a higher velocity threshold.
The actual goop physics haven't been altered as far as the initial entrance and underwater time is concerned, only leaving goop and subsequent bounces has been dampened significantly.
See merge request !7
finesine table
I pasted in finesine from #11 and made a merge request.
This has been lightly tested to ensure the renderer doesn't immediately break. No ill effects have been observed so far.
See merge request !17
A_SetObjectFlags tweak
Only reset the sector/blockmap links on an object calling A_SetObjectFlags if the MF_NOSECTOR|MF_NOBLOCKMAP flags change. Fixes a freeze related to LD442 demonstrated in MascaraSnake's example WAD at https://dl.dropboxusercontent.com/u/27962790/statetest.wad .
See merge request !11
Re-add/fix broken platform momz mobj code.
The changes in this branch re-add the platform's momentum to players and mobjs which leave the platform (eg. by jumping) so that they move with relative velocity as expected. This behavior was unintentionally broken in SRB2 2.0, which adds a lot of artificial difficulty to certain segments of the levels, where you have to jump between high velocity moving platforms which seemingly cut your jump height to nothing.
Not only has the behavior been fixed, but it has now been enhanced to move the camera while free-falling between platforms as well, completing the illusion of full relative velocity with minimal hiccups. [Observe.](http://i.imgur.com/zmSfUyp.gifv)
See merge request !14
Miscellanous fixes to merge
These are the commits from the "miscellanous-fixes" branch that are okay to merge in.
Bugs fixed include the following:
* CTF flags respawning incorrectly: they cannot z position themselves correctly, and they cannot flip themselves.
* The weird "jumping" spring/monitor effect: this is the result of an internal mobj_t pointer (tmfloorthing, specifically) not resetting itself to NULL for the next object's thinker, resulting in Z movement code thrusting the object vertically at tmfloorthing->momz.
See merge request !18
... because some things (Lua. custom header entries) move it.
https://mb.srb2.org/showthread.php?t=40580
(Technically breaks netgame compatibility for Lua-heavy mods, so in next.)
That's supposed to be run once a frame, not once per hook
per mobj per frame you moron. If you just run it seven
thousand times a frame, of course your framerate will drop.
Dummy, what do you think you're doing? If you
just push mobjs and players into Lua all willy-
nilly everywhere, you'll wind up generating
tons of metatables and stuff you arne't even
gonna use!
Oh. Thanks me, I'm really smart.
This _should_ solve some significant performance
issues Lua experiences. If not, I will be very
upset for having wasted so much time and effort.
There will be bugs, this kind of thing needs to
be thuroughly tested and this is just the first
iteration of it.
Assume that every frame the player is on the ground, their pmomz will
be re-set properly if the floor is moving, therefore if the platform
STOPS, we need this to set it to 0.
This fixes the issue with upside-down springs shooting downwards if you touch another of its kind. Also fixes one of the issues with monitors in Icicle Falls (after you phase inside the East-most float-bob FOF's monitor via the other bug and jump up to break it while there, the NEXT monitor moves upwards too)
Here's how it works: When a player walks off the
moving platform, it applies their pmomz once, and
then _keeps pmomz set_ so that the camera still
adds pmomz to its movements until they hit another
floor. This way, the camera doesn't jerk around.
Also gain velocity from walking off an "up" elevator normally?
This _looks_ incorrect because the camera stops matching
the platform movement the moment you step off, but I
assure you it is a correct and accurate movement.
(Try it with chasecam off.)
Now players will apply platform movement when jumping,
but only if the platform is moving the same direction
as their jump is, and all other objects will have an
appropriate pmomz in reverse gravity FOF situations.
Since PA_JUMP is used to determine when
springing upwards now and the nextstate
isn't used for falling, the jump state
can now be properly animated. :)
Added drowning to all players, and several new
Super animations for Sonic.
Removed A_Fall from S_PLAY_DEAD and moved its
effect into P_KillMobj for player avatars.
No longer turns you super, instead emeralds steal points
from enemy players and give you (and relevant teammates)
an invincibility + super sneakers monitor.
P_PlayerWeaponPanelOrAmmoBurst will go through all of the
player's weapon rings and either drop the weapon panel itself
(with no ammo attached, and no ammo taken away!) OR if the
player has ammo but no weapon, it drops the ammo instead
(and you lose it).
These functions were already here before, and I /swear/ the slope
physics became slightly less glitchy after switching to them...
Only issue is the slope plane mapping code hasn't been properly
converted yet, so they don't render properly for now.
tmthing must not be set outside of P_MapStart and P_MapEnd
or the game will fail a sanity check which ensures that
mobj references are not persistent across frames and crash.
Angles now go from 0 to 0xFFFF (360 degrees == FRACUNIT) instead
of using a full UINT32. Lua only has one number type, so signedness
gets in the way of using angle_t directly. This handling of angles
matches up with how ZDoom ACS scripting and the like does it.
I also changed all the integer casts and pushes of fixed_t to
their own macro in preperation for possible future seperation.
EvalMath is for SOC only.
It spawns an entirely seperate instance of Lua and requires
uppercase-only strings, and it's ability to parse strings to
enums is redundant to Lua's _G table (try using
_G["MT_BLUECRAWLA"] for instance)
Your acceleration vector parallel to the slope is reduced based on slope
angle if it's going up the slope. The pull physics' momentum increase was
toned down a bit to go along with this. Also, I removed the ifdefs for
OLD_MOVEMENT_CODE because why should that be kept around?
Actual blockmap fix
MI's "fix" was a reversion of something that allowed 2.0 maps to use the entire blockmap. This MR reverts that fix and adds a proper fix to the issue of west/south edges of the blockmap not working as they should. Tested with a thokbarrier-less square map (all sides were solid) and with AGZ (objects are tangible all around the map, like they are in 2.1.14).
See merge request !10
Re-fix the server global variable in Lua
I screwed up the conditions on my first attempt to fix this, since I only tested one scenario. Tested this in SP, at the main menu, and both clientside and (dedicated)serverside in MP. Everything works as intended.
See merge request !9
Polyobject more fixes
Extra fixes related to polyobjects; actually properly putting their flats alongside them in the draw list, and making them able to use single-waypoint zoom tube sequences. Also threw in a smoothness fix for swinging chains while I was there.
See merge request !8
Polyobject scroll hotfix
Things fixed:
* Polyobjects should now carry the same thing types as conveyors (notable example; they'll now carry Crawlas when they wouldn't before)
* The drifting issue with players on spinning polyobjects should be fixed. (I swapped in the old bad hack for a new hack that should work like it's supposed to)
See merge request !6
Now it will only bounce ONCE when you jump on it, and Knuckles
just barely gets enough velocity out of his jump for even that.
This will leave players vulnerable and annoyed for a lot less
time while they wait to finish bouncing.
...
(It's that infamous intangible West/South linedefs bug, which was really a blockmap-related bug all along. AND IT WAS SO SIMPLE TO FIX!)
git-svn-id: https://code.orospakr.ca/svn/srb2/trunk@9048 6de4a73c-47e2-0310-b8c1-93d6ecd3f8cd
Core code has too many #define dependencies on interface-specific
defines. This means that it's currently not possible to safely
separate the core and interface code into different contexts. The
core code should be refactored to accomadate for this because we
should not have any interface-specific code in core in the first
place.
This reverts the static library SRB2Core from a7135094 and instead
adds the core sources to the SRB2SDL2 target directly.
So frustrating...
Core and SDL2 are two separate targets now. Core is a static library
that is linked into SRB2SDL2. The sources for both are separated.
When using an IDE like Visual Studio or Xcode, the source code
organized into groups that explain what that group of sources does.
In the future, "Main" could be split into a few more groups based on
file prefixes, but I think the way it is set up works for now.
Makefile targets are not affected by source_groups and typing `make`
will automatically compile both the "Core" library and SRB2SDL2
itself.
Access the benefits of -debug, console devmode, and a complete gamedata.dat (all secrets unlocked) all in one go.
Moved "#if 0" and "#if 1" to "#ifdef DEVMODE" so the existance of this cheat and MD5 validation and all that can be toggled in one place too.
git-svn-id: https://code.orospakr.ca/svn/srb2/trunk@8998 6de4a73c-47e2-0310-b8c1-93d6ecd3f8cd
Todo: Stop the redundancy that currently goes on with adding MD2s on game start-up (note that HWR_AddSpriteMD2/HWR_AddPlayerMD2 are run for all sprites/skins BEFORE HWR_InitMD2 is called)
git-svn-id: https://code.orospakr.ca/svn/srb2/trunk@8988 6de4a73c-47e2-0310-b8c1-93d6ecd3f8cd
...
(It's that infamous intangible West/South linedefs bug, which was really a blockmap-related bug all along. AND IT WAS SO SIMPLE TO FIX!)
git-svn-id: https://code.orospakr.ca/svn/srb2/trunk@9048 6de4a73c-47e2-0310-b8c1-93d6ecd3f8cd
Currently the main benefit of these changes is that a number of non-Object-related hazards/deaths no long rely on dummy MT_NULL objects or other hacks to tell the game how you were hurt/killed, yay
git-svn-id: https://code.orospakr.ca/svn/srb2/trunk@9039 6de4a73c-47e2-0310-b8c1-93d6ecd3f8cd
running is another story
Author: Ronald Kinard <furyhunter600@gmail.com>
Date: Wed Jan 28 02:09:03 2015 -0600
git-svn-id: https://code.orospakr.ca/svn/srb2/trunk@9013 6de4a73c-47e2-0310-b8c1-93d6ecd3f8cd
Find them in MAINCFG in player.dta instead, where they belong. This means that player.dta finally contains ALL playable character-related data, with none of it in the iwad or exe.
git-svn-id: https://code.orospakr.ca/svn/srb2/trunk@9003 6de4a73c-47e2-0310-b8c1-93d6ecd3f8cd
Access the benefits of -debug, console devmode, and a complete gamedata.dat (all secrets unlocked) all in one go.
Moved "#if 0" and "#if 1" to "#ifdef DEVMODE" so the existance of this cheat and MD5 validation and all that can be toggled in one place too.
git-svn-id: https://code.orospakr.ca/svn/srb2/trunk@8998 6de4a73c-47e2-0310-b8c1-93d6ecd3f8cd
SPR_PLAY now calls up a secondary spritedef for all animations for all players. Old character wads (including player.dta) are no longer compatible.
git-svn-id: https://code.orospakr.ca/svn/srb2/trunk@8993 6de4a73c-47e2-0310-b8c1-93d6ecd3f8cd
Todo: Stop the redundancy that currently goes on with adding MD2s on game start-up (note that HWR_AddSpriteMD2/HWR_AddPlayerMD2 are run for all sprites/skins BEFORE HWR_InitMD2 is called)
git-svn-id: https://code.orospakr.ca/svn/srb2/trunk@8988 6de4a73c-47e2-0310-b8c1-93d6ecd3f8cd
It is really messy at the moment. There is no support for copying the
necessary frameworks and dylibs out to the bundle for distribution, and
it is a frankenstein of manual find_library and find_package which can
sometimes pick up Homebrew dylibs.
Apparently the mistake also caused myargc to be cleared in Linux64 SDL2 (as pointed out by that ilag11111 guy on GitHub), so that should be fixed now too.
In some cases, the warp back to center was being detected as a mouse motion, causing all sorts of silliness with the mouse. The workaround is by only using the first motion event and ignoring every event after that, until the next call to I_GetEvent.
Fixes https://mb.srb2.org/showthread.php?t=39921 where the issue before was that when you transformed your momentum would still have you moving slowly, which could cancel out the animation.
Previously in Lua, dedicatedserver would only return true if the player running the script was the one hosting the dedicated server. In all other cases, it would return nil. This fixes it to point to the server host no matter what.
GL Initialization needs to happen before window creation,
otherwise the GL library will get reloaded while in use and
Windows will have a heart attack. This is bad, obviously.
This is a massive performance boost on slow processors, because
before, the intermediary buffer had to be swizzled to ABGR8888
before being uploaded -- for large resolutions this was an
enormous performance penalty.
MD2's can be translucent again.
MD2's can use sprites instead of another random texture if they have no
texture.
Patches are drawn in the correct place on non aspect correct
resolutions.
Cropped Patches are drawn.