- In the A_MoveSprite() code that transports projectiles due to an SE7
(introduced in r1450 / legacy ROR), only report "success" if the
transportation succeeded.
- Clear newly introduced internal SPRITE_DIDNOSE7WATER flag after
checking it.
git-svn-id: https://svn.eduke32.com/eduke32@3682 1a8010ca-5511-0410-912e-c29ae57300e0
Also, in two cases, don't assign A_IncurDamage() result to a variable if
it's not needed.
git-svn-id: https://svn.eduke32.com/eduke32@3681 1a8010ca-5511-0410-912e-c29ae57300e0
- In S_PlaySound(), move the sound index bound check above an indexing.
- For A_CheckHitSprite(), and A_FindPlayer(), allow NULL second arg.
- In A_ShootWithZvel(), make some one-letter vars be int32_t, making
storing safeldist() results in them meaningful.
- In MaybeTrainKillEnemies(), remove two redundant checks and move another
one further up.
- Comment that SIDEBOLT1 will never be translucent as was probably intended.
- In G_MoveFX(), fix an always-true comparison.
git-svn-id: https://svn.eduke32.com/eduke32@3680 1a8010ca-5511-0410-912e-c29ae57300e0
- Rewrite some sprites-of-{stat,sector} loops using the SPRITES_OF,
SPRITES_OF_SECT and new SPRITES_OF_SECT_SAFE macros.
- In passing, identify some problems and mark them with 'XXX', but don't
attempt to fix them yet.
- The usual readability improvements...
git-svn-id: https://svn.eduke32.com/eduke32@3679 1a8010ca-5511-0410-912e-c29ae57300e0
Actually, the tweaked code in VM_Move() is not specific to projectiles, so
other sprites now may pass no-SE7 water boundaries too, but it's most noticeable
with projectiles.
git-svn-id: https://svn.eduke32.com/eduke32@3678 1a8010ca-5511-0410-912e-c29ae57300e0
That is, if submerging, the lower sector MUST have lotag 2. If emerging, the
upper sector MUST have lotag 1. (Previously, emersion happened from ST 2 sectors
unconditionally.) This means that the area where submersion or emersion can
happen is now the same for the top and bottom parts.
git-svn-id: https://svn.eduke32.com/eduke32@3677 1a8010ca-5511-0410-912e-c29ae57300e0
Let me know if this breaks any mods that have #2462 with an x-dimension other than 320.
git-svn-id: https://svn.eduke32.com/eduke32@3674 1a8010ca-5511-0410-912e-c29ae57300e0
(Note: We are still vulnerable to crashes here (and likely in other places), but you have (4096-16) extra characters to work with. We should consider replacing many uses of Bsprintf with Bsnprintf.)
git-svn-id: https://svn.eduke32.com/eduke32@3669 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes liztroops not passing TROR layers when on the jetpack, as well as
other enemies capable of moving upward, and also COMMANDER and DRONE (for which
the code is special-cased).
git-svn-id: https://svn.eduke32.com/eduke32@3666 1a8010ca-5511-0410-912e-c29ae57300e0
... like was done with clipmove() previously.
Also, do some code clean up. There are no changes of functionality.
git-svn-id: https://svn.eduke32.com/eduke32@3662 1a8010ca-5511-0410-912e-c29ae57300e0
Nag: The behavoir of atoi() is *undefined* if "the value of the result
cannot be represented" (C99 7.20.1).
Note: my nagging about undefined behaviors will *not* get less over time. :P
git-svn-id: https://svn.eduke32.com/eduke32@3660 1a8010ca-5511-0410-912e-c29ae57300e0
The Lunatic build compiles with new structures for sector and wall types.
They have separate members for TROR {up,down}{bunch,nextwall}, so there are
no conflicts with other uses of members into which they were previously
shoehorned. Also, the maximum bunch limit is bumped to 512 in that build.
Currently, loading from V7/8/9 and saving to V7 and V8 are supported.
git-svn-id: https://svn.eduke32.com/eduke32@3658 1a8010ca-5511-0410-912e-c29ae57300e0
Also, implement 'cmenu' in LunaCON, make 'definequote' also allowed as inner
command.
git-svn-id: https://svn.eduke32.com/eduke32@3656 1a8010ca-5511-0410-912e-c29ae57300e0
So that members needing it are checked when they're assigned to using the
usual syntax. What kind of check to perform (sector, player, ... x whether
negative values are allowed) is written in a declarative fashion inside the
C declaration.
Also, make Lunatic's MAXQUOTES be C's OBITQUOTEINDEX and bound-check an
access of sprite[p->wackedbyplayer] in the C code.
git-svn-id: https://svn.eduke32.com/eduke32@3653 1a8010ca-5511-0410-912e-c29ae57300e0
Toggled with Ctrl+Shift+[KP-]. Variable 'headlight_range' controls its range.
For the implementation, a new event EVENT_PREDRAW3DSCREEN was added.
git-svn-id: https://svn.eduke32.com/eduke32@3648 1a8010ca-5511-0410-912e-c29ae57300e0
In Lunatic, gamevars (variables that are saved with savegames) are per-module.
git-svn-id: https://svn.eduke32.com/eduke32@3642 1a8010ca-5511-0410-912e-c29ae57300e0
This is done by always calling FX_PlayAuto3D() to play such sounds. It now
additionally takes a third argument 'loophow', permissible values being
FX_ONESHOT and FX_LOOP.
git-svn-id: https://svn.eduke32.com/eduke32@3631 1a8010ca-5511-0410-912e-c29ae57300e0
Also, for tip_incs values greater or equal than the number of elements in
this table, return early reporting that the hand has been drawn, so that
the otherwise selected weapon is not drawn.
git-svn-id: https://svn.eduke32.com/eduke32@3630 1a8010ca-5511-0410-912e-c29ae57300e0
For events and actors, a flag can be now passed whether to chain the new
function at the beginning or end of an already existing one, or to replace
it entirely.
Also, for the translator, add option -fno-error-nostate, disabled by default.
git-svn-id: https://svn.eduke32.com/eduke32@3629 1a8010ca-5511-0410-912e-c29ae57300e0
- Don't attempt to play an ANM file if it is empty (warn) or too short (error).
- If failing to read IVF file header or initializing VPX codec, don't play ANM.
- Return early from gltexapplyprops() if not in GL modes.
git-svn-id: https://svn.eduke32.com/eduke32@3628 1a8010ca-5511-0410-912e-c29ae57300e0
The code is mostly by other people, who are credited in the CON files.
git-svn-id: https://svn.eduke32.com/eduke32@3627 1a8010ca-5511-0410-912e-c29ae57300e0
With this change, it is impossible for negative values to be used as array
indices inside this function, and I believe that it is also impossible that
they escape to somewhere they might be used as such.
For Lunatic, allow setting actor[].picnum to negative values and in the
translator, add (commented out) code to warn whenever it is set to a constant
negative value. Also, fix a _sound call in _addphealth in control.lua.
git-svn-id: https://svn.eduke32.com/eduke32@3626 1a8010ca-5511-0410-912e-c29ae57300e0
While the functionality was already internally in place for gametext as one of two hacks using ROTATESPRITE_MAX (the other still used by minitext_() to align with the statusbar) we must codify a bit in the engine for safe external use. (Otherwise, ROTATESPRITE_MAX could/would theoretically increase and leave modders high and dry.)
(Dev note: In G_DrawTXDigiNumZ(), ROTATESPRITE_MAX was used to bitshift the value used to calculate digit spacing for no reason I can ascertain other than to introduce rounding errors into the zoom/textscale calculations. It was never used anywhere, so I removed it.)
Bonus: The scaling code for digitalnumberz and gametextz has been modified so that the spacing is no longer affected by rounding errors. Try animating the zoom value and compare how the text used to jump but now does not.
git-svn-id: https://svn.eduke32.com/eduke32@3608 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, only the <0 condition was checked. However, the passed sectnums
could be >= MAXSECTORS (at least in C-CON), for example when issuing 'canseespr'
on a sprite not in the game world.
git-svn-id: https://svn.eduke32.com/eduke32@3603 1a8010ca-5511-0410-912e-c29ae57300e0
There's only one RETURN value on the C side (g_RETURN), which is also referenced
from Lua. Upon entering an event, its value takes on the per-event default one,
and its value when the event code finishes is passed back to the game.
Independently of that, its value is always saved and restored across event calls.
git-svn-id: https://svn.eduke32.com/eduke32@3601 1a8010ca-5511-0410-912e-c29ae57300e0
In passing, fix a couple of omissions: gameactor() being passed nil's in the
middle, more than one moveflag to CON *actor.
git-svn-id: https://svn.eduke32.com/eduke32@3597 1a8010ca-5511-0410-912e-c29ae57300e0
This is so that files residing in GRPs (or anywhere the engine looks for them)
can be read, too.
git-svn-id: https://svn.eduke32.com/eduke32@3594 1a8010ca-5511-0410-912e-c29ae57300e0
Also, for the embedded translator: don't warn on unrecognized command line opt.
git-svn-id: https://svn.eduke32.com/eduke32@3590 1a8010ca-5511-0410-912e-c29ae57300e0
... into a macro MFLAGS_NOCONV(m). Since it currently expands to (0), some dead
code will be eliminated.
Introduce a "compilation option" macro DO_MD2_MD3_CONV in mdsprite.c.
git-svn-id: https://svn.eduke32.com/eduke32@3588 1a8010ca-5511-0410-912e-c29ae57300e0
So that it doesn't result in the -t (respawn on) command line switch.
git-svn-id: https://svn.eduke32.com/eduke32@3586 1a8010ca-5511-0410-912e-c29ae57300e0
This enables ART animations to take effect on voxels in classic, voxels and models in Polymost, and models in Polymer.
git-svn-id: https://svn.eduke32.com/eduke32@3580 1a8010ca-5511-0410-912e-c29ae57300e0
The unmodified behavior is completely wrong and I don't see how any mod could ever use it.
git-svn-id: https://svn.eduke32.com/eduke32@3578 1a8010ca-5511-0410-912e-c29ae57300e0
(Modders who used an older version: Take a look at the SVN diff, the fixes can easily be applied by hand.)
git-svn-id: https://svn.eduke32.com/eduke32@3577 1a8010ca-5511-0410-912e-c29ae57300e0
This now should look correct for both settings of r_usenewaspect.
git-svn-id: https://svn.eduke32.com/eduke32@3575 1a8010ca-5511-0410-912e-c29ae57300e0
- Make _buildargv[_buildargc] NULL.
- With SDL layer, pass argv and argc directly and get rid of _build* ones.
- Add tilesiz* to dynsymlists.
git-svn-id: https://svn.eduke32.com/eduke32@3573 1a8010ca-5511-0410-912e-c29ae57300e0
Also, fix an error() call in control.lua:gamearray_file_common().
git-svn-id: https://svn.eduke32.com/eduke32@3572 1a8010ca-5511-0410-912e-c29ae57300e0
(Or '0's, but that case is handled automatically.) The resulting generated
number is taken by looking at the 8 lower nibbles and interpreting them as
a signed 32-bit integer.
Also add some number parsing tests to test/nlcf_break.con.
git-svn-id: https://svn.eduke32.com/eduke32@3571 1a8010ca-5511-0410-912e-c29ae57300e0
Toggling whether a getactorvar for a global or per-player gamevar issues
a warning or a hard error, the latter being the default.
Also, make it possible to readgamevar/savegamevar per-actor gamevars and
add userdefs member "idplayers" (read-only).
git-svn-id: https://svn.eduke32.com/eduke32@3570 1a8010ca-5511-0410-912e-c29ae57300e0
The first transformation makes the "control structure too long" error appear
only with larger if/else cascades, though it's still possible.
git-svn-id: https://svn.eduke32.com/eduke32@3569 1a8010ca-5511-0410-912e-c29ae57300e0
The only operation for which proper code is generated is reading a single value
from a system gamearray.
git-svn-id: https://svn.eduke32.com/eduke32@3562 1a8010ca-5511-0410-912e-c29ae57300e0
...at the beginning of each function called back from C, and each case/default
function. Called -fcache-sap. Disabled by default.
git-svn-id: https://svn.eduke32.com/eduke32@3561 1a8010ca-5511-0410-912e-c29ae57300e0
Also,
- an optimization for sprite[]:setpos(). Calls to get_sprite_index()
seem to be pretty slow (at least when they're not compiled).
- add getzrange to the dynsymlists
git-svn-id: https://svn.eduke32.com/eduke32@3560 1a8010ca-5511-0410-912e-c29ae57300e0
Fix 'setsprite' and 'music'. A good timing test for actors performance is
the starfield of WGR2's E1L1 ("Nexus").
git-svn-id: https://svn.eduke32.com/eduke32@3558 1a8010ca-5511-0410-912e-c29ae57300e0
This is the only gamevar of its kind that is handled for Lunatic, neither
PLR_MORALE nor LOGO_FLAGS are.
git-svn-id: https://svn.eduke32.com/eduke32@3556 1a8010ca-5511-0410-912e-c29ae57300e0
This should have no adverse effects or side-effects. The changes only apply if a modder chose to use completely broken functionality in the first place.
git-svn-id: https://svn.eduke32.com/eduke32@3544 1a8010ca-5511-0410-912e-c29ae57300e0
All non-option positional arguments after an @ sign are taken as list files:
hashes at the beginning of a line denote comments, truly empty lines are
ignored, all other lines should contain one root CON file name.
git-svn-id: https://svn.eduke32.com/eduke32@3539 1a8010ca-5511-0410-912e-c29ae57300e0
From the PM conversation "gamearrays in 64-bit". A test case is the breaking
glass at the beginning of the DukePlus map.
git-svn-id: https://svn.eduke32.com/eduke32@3536 1a8010ca-5511-0410-912e-c29ae57300e0
Instead of those of the translated code. Also some codegen tweaks and fixes.
git-svn-id: https://svn.eduke32.com/eduke32@3535 1a8010ca-5511-0410-912e-c29ae57300e0
Also update test/dangling_else.con. See there for how if* cascades are handled
in CON. It's actually kind of pretty. Also, take care to handle code deferred
to after the if/if-else properly (ifpdistl, ifpdistg, ifcanseetartet).
git-svn-id: https://svn.eduke32.com/eduke32@3534 1a8010ca-5511-0410-912e-c29ae57300e0
- add LuaJIT's 'v' module printing trace info
- translator: fix game function name definitions
- revert math.fmod -> math.modf, they are different!
- disable JIT compilation for a function we're getting strange crashes with
- Make some of DukePlayer_t's members 'bool' on the Lua side. It's way
too easy to write something like "ps.jetpack_on" where "ps.jetpack_on~=0"
was meant. [Background: Kyle873 observed that Duke was always floating.]
- Error out if looping in our_module(). I find this behavior more logical
than returning true.
- fix a couple of missed FORBID variables
git-svn-id: https://svn.eduke32.com/eduke32@3530 1a8010ca-5511-0410-912e-c29ae57300e0
Notes:
- MAXJOYBUTTONS is out of sync between the two definitions
- In menus.c, NUMMOUSEFUNCTIONS must equal MAXMOUSEBUTTONS,
fail to compile if this becomes false.
git-svn-id: https://svn.eduke32.com/eduke32@3527 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes an update issue: start EDuke32 without warping to a map in Polymost,
change to classic, and change to Polymost again. The OSD background will be
displaced.
git-svn-id: https://svn.eduke32.com/eduke32@3525 1a8010ca-5511-0410-912e-c29ae57300e0
We must not call these functions using the FFI, since the Lua state is
considered locked across such calls.
git-svn-id: https://svn.eduke32.com/eduke32@3520 1a8010ca-5511-0410-912e-c29ae57300e0
- some more outer commands
- gamearray persistence
- faster 'mod': use math.modf instead of math.fmod (the former is JIT-compiled)
- checkavail*
- THISACTOR special handling
- Fix building in Windows (export A_ShootWithZvel instead of A_Shoot).
git-svn-id: https://svn.eduke32.com/eduke32@3516 1a8010ca-5511-0410-912e-c29ae57300e0
Thus making the identical source and destination quote number case into the
expected no-op instead of being undefined behavior.
git-svn-id: https://svn.eduke32.com/eduke32@3510 1a8010ca-5511-0410-912e-c29ae57300e0
If m32script gamevar "move_by_one" is nonzero, the some keys move the
"player arrow" by increments of 1:
- Without SHIFT: LEFT/RIGHT absolute x, DOWN/UP absolute y, A/Z absolute z.
- With SHIFT: DOWN/UP (unbounded!) horiz, LEFT/RIGHT angle.
This can be useful to debug renderer bugs that show a high sensitivity to the
exact location ("are transient in space").
git-svn-id: https://svn.eduke32.com/eduke32@3509 1a8010ca-5511-0410-912e-c29ae57300e0
Face- and wall-aligned sprites are drawn using the wall routines in BUILD.
However, the per-x-screen-coordinate distance (swall[]) is calculated in a way
that potentially incurs great precision loss (for example 5 bits for
xdimen=1280, yxaspect=65536). This leads to the starting (top) vertical texture
coordinate possibly wrapping to large values, leaving an unsightly "stray line"
on top of the sprite from certain viewing angles/horiz values.
The approach to fix it has two parts: first, the distance is calculated using
float values, preventing the precision loss. Because this doesn't fully prevent
the unwanted lines, the texture coords are clamped to the mininum and maximum
(0 and UINT32_MAX respectively) when calculating them for sprites.
Note that stray lines may still appear at the *bottom* of sprites under certain
circumstances, for example when viewing at a y-flipped sprite from above.
These should be less noticable in real-world usage though.
The feature is guarded by a macro HIGH_PRECISION_SPRITE in case using floating
point or 64-bit integers is undesirable/impossible on some platforms.
git-svn-id: https://svn.eduke32.com/eduke32@3483 1a8010ca-5511-0410-912e-c29ae57300e0
That is, first check if the sprite is in the game world and then if it
already has the desired sector or status number. This doesn't change anything
in our codebase, since the return values of these functions are never examined.
git-svn-id: https://svn.eduke32.com/eduke32@3474 1a8010ca-5511-0410-912e-c29ae57300e0
The usual: declare locals more tightly, const-qualify them where it helps
readability, remove dead code...
git-svn-id: https://svn.eduke32.com/eduke32@3470 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, actor[].shootzvel (implementation detail, not available to CON)
was checked, and if it was !=0, that was the overridden velocity. The value
0 meant "hardcoded, projectile-dependent velocity". But that neccesiated a
hack where if zvel 0 was passed and really meant, it needed to be set to
1 instead. Now we have A_ShootWithZvel() taking an additional last argument
plus a macro SHOOT_HARDCODED_ZVEL permissible for that argument.
git-svn-id: https://svn.eduke32.com/eduke32@3465 1a8010ca-5511-0410-912e-c29ae57300e0
actors.h: remove 'packed' from projectile_t, tiledata_t. In tiledata_t,
make .cacherange member an int32_t so that the following member
"projectile_t defproj" is aligned on a 4-byte boundary.
player.h: remove 'packed' from playerspawn_t, DukeStatus_t, input_t.
In Lunatic, correct packing attribute of the base type of the unrestricted
actor_t and DukePlayer_t pointer types (the declaration was used without
Bump BYTEVERSION.
git-svn-id: https://svn.eduke32.com/eduke32@3458 1a8010ca-5511-0410-912e-c29ae57300e0
Most of them are already aligned to their natural boundaries, so lowering
the alignment to 1 byte can only worsen things by making the C compiler
generate poorer (unaligned access) code for some platforms.
The layout of structures is not specified by the C Standard, but is rather
given by a particular platform + toolchain's ABI (application binary interface).
Most ABIs follow the expected pattern "alignment of scalars is their size,
alignment of arrays is that of its element type, alignment of structs is the
maximum alignment of its members". A couple of links to particular ABIs are
given in build.h.
Problems are expected with archs that care about unaligned access when a pointer
to a non-packed struct is taken that resides in a packed aggregate, but these
uses should be weeded out (I'm not sure if there are any in our codebase).
The following types are affected, only hitdata_t changes its size:
sectortype, walltype, spritetype, spriteext_t, spritesmooth_t,
struct validmode_t, picanm_t, palette_t, vec2_t, vec3_t, hitdata_t.
git-svn-id: https://svn.eduke32.com/eduke32@3455 1a8010ca-5511-0410-912e-c29ae57300e0
And const them appropriately. Also remove #if 0'ed code related to an MSVC
pragma.
git-svn-id: https://svn.eduke32.com/eduke32@3451 1a8010ca-5511-0410-912e-c29ae57300e0
Meaning that only *ettsprite[THISACTOR] makes sense from CON. It did before
too, because .tspr was set before each event run (and not before all runs),
only that it was never nulled, which was kind of untidy.
git-svn-id: https://svn.eduke32.com/eduke32@3450 1a8010ca-5511-0410-912e-c29ae57300e0
Its only use is to have a actor -> tsprite mapping for the EVENT_ANIMATESPRITE
event and .tspr will be set before it is run.
git-svn-id: https://svn.eduke32.com/eduke32@3448 1a8010ca-5511-0410-912e-c29ae57300e0
The m32script variable 'showrespawn_always' toggles whether the respawned picnum
is shown unconditionally instead of only when aimed at (and locked onto the
RESPAWN sprite) in 3D mode.
Cool idea by Micky C.
NOTE: sometimes doesn't work because of a bug in the m32script interpreter.
git-svn-id: https://svn.eduke32.com/eduke32@3447 1a8010ca-5511-0410-912e-c29ae57300e0
Pass types via ffi.typeof() instead of declaring them in the
global namespace when possible.
git-svn-id: https://svn.eduke32.com/eduke32@3437 1a8010ca-5511-0410-912e-c29ae57300e0
Use a new flag to mark hard-coded enemies, not SPRITE_BADGUY.
This fixes an issue where in E1L4, a pigcop would appear in the area
you have to crawl under shrunk. Thanks to LLCoolDave1 for pinpointing
the range of relevant revisions.
git-svn-id: https://svn.eduke32.com/eduke32@3426 1a8010ca-5511-0410-912e-c29ae57300e0
Whenever it should be not, STRIP is set to the empty string.
This fixes the Lunatic RELEASE=1 build.
git-svn-id: https://svn.eduke32.com/eduke32@3422 1a8010ca-5511-0410-912e-c29ae57300e0
The pixel doubling now only applies to the area where the world scene is drawn,
i.e. it may be smaller than the physical screen / WM window size. The optimized
version is slightly faster than for non-doubled pixels for me (optimized build),
but see code for caveats. Some other minor issues:
- won't work when the world is drawn from demo cameras (and offscreen, but that
matters less)
- will leave a few pixels empty when running with x resolutions not evenly
divisible by 4
git-svn-id: https://svn.eduke32.com/eduke32@3421 1a8010ca-5511-0410-912e-c29ae57300e0
In CON, the bit is still always cleared for user-defined gamevars.
git-svn-id: https://svn.eduke32.com/eduke32@3417 1a8010ca-5511-0410-912e-c29ae57300e0
- more predefined vars
- fix recursive states and ones with a stray "else" before the end
git-svn-id: https://svn.eduke32.com/eduke32@3409 1a8010ca-5511-0410-912e-c29ae57300e0
Whether a sprite is considered for texel-hitscan is determined on the base
tile number, not the individual animated tile numbers.
git-svn-id: https://svn.eduke32.com/eduke32@3404 1a8010ca-5511-0410-912e-c29ae57300e0
* Make the "classic status bar fullscreen viewport" mode accessible
in classic too.
* Make range of status bar scale 36..100
* Update ud.statusbarmode when executing OSD command r_size (ud.screen_size).
NOTE: ud.statusbarmode is considered internal. Don't use from CON!
* Make sure 1) loading any configuration and 2) menu bars work correctly.
(The "classic status bar fullscreen viewport" mode will never be restored
though because ud.statusbarmode isn't handled by the OSD var system).
git-svn-id: https://svn.eduke32.com/eduke32@3402 1a8010ca-5511-0410-912e-c29ae57300e0
One use was in determining the ray vector for the mouse-aiming hitscan
in the editor. Unfortunately, the change doesn't make it any less broken
in Polymost, even if the two instances were out of sync.
git-svn-id: https://svn.eduke32.com/eduke32@3401 1a8010ca-5511-0410-912e-c29ae57300e0
If enabled, dragging wall vertices will correct the xrepeat after the
mouse button is released, so that the pre-drag absolute stretching is
restored.
git-svn-id: https://svn.eduke32.com/eduke32@3398 1a8010ca-5511-0410-912e-c29ae57300e0
- Run it twice, since the first one is wrong.
- Warn when attempting to align based on a top-oriented wall. When the
sequence of walls to align has "windows", only the bottom parts will
be correct.
- Make the modifiers actually useful:
* Pressing SHIFT aligns at most one wall, remove the old CTRL modifier.
* The rest is as before: ALT makes the walls have (approximately) equal
texture stretching, ['] (quote) aligns the immediate TROR-nextwalls.
git-svn-id: https://svn.eduke32.com/eduke32@3396 1a8010ca-5511-0410-912e-c29ae57300e0
Also, factor out 2x dup'd code of insertsprite() into do_insertsprite()
and add searchwall-displaying code into package/samples/a.m32.
git-svn-id: https://svn.eduke32.com/eduke32@3395 1a8010ca-5511-0410-912e-c29ae57300e0
Also, add another flag, signifying that from the editor, also the
"lastwall"s (i.e. the CCW-linked points) should get collected. This is
to signal the editor that their wall lengths should be displayed, too.
git-svn-id: https://svn.eduke32.com/eduke32@3394 1a8010ca-5511-0410-912e-c29ae57300e0
This is done by introducing an additional internal bit, meaning
"play only one instance". It is set for all sounds which have bit 1
("repeat in the sound system") set at definesound time, but not those
that set bit 1 temporarily (see r3336).
git-svn-id: https://svn.eduke32.com/eduke32@3393 1a8010ca-5511-0410-912e-c29ae57300e0
Also, rewrite comparison to the non-tint in astub.c to be even less hackish.
git-svn-id: https://svn.eduke32.com/eduke32@3387 1a8010ca-5511-0410-912e-c29ae57300e0
- Stop using memcache on some other failure paths, particularly when
failing to read from the on-disk texcache.
- Factor out cache reading code (3x).
- Fix endianness issues affecting big-enadian systems (one introduced by
r3382, one existing before). Comment each B_LITTLE32 with whether we're
converting from native to on-disk (little) endianness or back.
git-svn-id: https://svn.eduke32.com/eduke32@3386 1a8010ca-5511-0410-912e-c29ae57300e0
This obviously won't help performance as the scene has still to be drawn at
the original resolution, but it's better than the draw-to-tile hack.
git-svn-id: https://svn.eduke32.com/eduke32@3378 1a8010ca-5511-0410-912e-c29ae57300e0
The SDL and Windows layers had slightly different code: the latter would
dereference a NULL pointer if stdout.txt failed being write-opened.
git-svn-id: https://svn.eduke32.com/eduke32@3377 1a8010ca-5511-0410-912e-c29ae57300e0
When reaching wall limits, it is possible that only some circle points will
be inserted and the result is left unfinished.
git-svn-id: https://svn.eduke32.com/eduke32@3376 1a8010ca-5511-0410-912e-c29ae57300e0
On the C side, zrange, angrange and autoaimang are represented as
DukePlayer_t members then.
git-svn-id: https://svn.eduke32.com/eduke32@3366 1a8010ca-5511-0410-912e-c29ae57300e0
Reproduced as follows (assuming all tiles have texel-hitscan for simplicity):
In E2L5, shoot the opening switch with the shotgun, aiming for the border.
The crash occurs because the *other*, depressed switch tile isn't yet loaded
when we index into its tile storage. Dereferencing 0+small number == BAD!
git-svn-id: https://svn.eduke32.com/eduke32@3364 1a8010ca-5511-0410-912e-c29ae57300e0
The diff may look daunting, but it's clear what is changed with
git diff (...) --color-words='[a-zA-Z0-9_]+|[^[:space:]]' -b
git-svn-id: https://svn.eduke32.com/eduke32@3361 1a8010ca-5511-0410-912e-c29ae57300e0
Factoring out 2x almost duplicated code into {P,A}_PostFireHitscan().
git-svn-id: https://svn.eduke32.com/eduke32@3360 1a8010ca-5511-0410-912e-c29ae57300e0
The code is duplicated with small changes for the hardcoded and custom
projectiles.
Adding local functions P_PreFireHitscan(), A_PreFireHitscan() and
Proj_MaybeAddSpread().
git-svn-id: https://svn.eduke32.com/eduke32@3358 1a8010ca-5511-0410-912e-c29ae57300e0
In Lunatic-only build, also always allocate the first 128 quotes.
git-svn-id: https://svn.eduke32.com/eduke32@3356 1a8010ca-5511-0410-912e-c29ae57300e0
Preventing a continuously growing stack top and inevitable program termination.
Also, commonize the error handling to live on the engine side.
git-svn-id: https://svn.eduke32.com/eduke32@3352 1a8010ca-5511-0410-912e-c29ae57300e0
FLAC source from git commit 0920bc1ffb07f038b317e7e8056509fe0e4b680e, patched by me.
Windows libFLAC.a built using i686-MinGW-w64 and x86_64-MinGW-w64.
HUGE thanks to rhoenie for building the Mac fat library (ppc, i686, x86_86).
git-svn-id: https://svn.eduke32.com/eduke32@3335 1a8010ca-5511-0410-912e-c29ae57300e0
* Renamed source/jaudiolib/third-party/mingw32 to source/jaudiolib/third-party/Windows.
* Moved source/jaudiolib/third-party/Windows/include to source/jaudiolib/third-party/common/include to use both on Windows and Apple.
* Deleted Apple/lib/include/{ogg,vorbis}/, see previous point.
* Deleted Apple/lib/libvorbisenc.a, 6MB saved.
* Moved Apple/lib/lib{ogg,vorbis,vorbisfile}.a to source/jaudiolib/third-party/Apple/lib, where they belong.
* Moved source files in Apple/ to source/, where they belong. (SDLMain.[mh] stay.)
* Deleted source/jaudiolib/third-party/{ogg,vorbis}.framework, not used any more.
* Renamed "StartupWinController*" to "startosx*".
git-svn-id: https://svn.eduke32.com/eduke32@3334 1a8010ca-5511-0410-912e-c29ae57300e0
In the normal game, these arrays are conceptually [MAX_WEAPONS][MAXPLAYERS],
allocated as CON per-player gamevars (e.g. WEAPONx_WORKSLIKE).
For Lunatic, they are replaced with
weapondata_t g_playerWeapon[MAXPLAYERS][MAX_WEAPONS].
git-svn-id: https://svn.eduke32.com/eduke32@3328 1a8010ca-5511-0410-912e-c29ae57300e0
Specifically, have a weapondata_t type mimicking the aplWeapon* arrays.
Keep a list weapondefaults[] which undergoes some static->dynamic tweaks
and then makes its way to the WEAPONx_XXX per-player gamevars.
git-svn-id: https://svn.eduke32.com/eduke32@3327 1a8010ca-5511-0410-912e-c29ae57300e0
- Rewrite the "clear background" routine in a no-brainer way instead of
juggling around with rotatesprite(). Make it common to game+editor.
Expose glRectd to glbuild.
- Don't stop OSD text line drawing when encountering a non-printable char.
Instead, treat it as space.
- In OSD_SetTextMode(), don't use swaplong (which really swaps 32-bit ints)
to swap pointers. Write an analogous "swapptr" instead.
- When changing from/to OSD, don't inject a pause key. This *might* have been
the cause of the reported pausing problems.
- clean up the code...
(Yes, this commit throws together too much stuff. I suck sometimes. :P)
git-svn-id: https://svn.eduke32.com/eduke32@3321 1a8010ca-5511-0410-912e-c29ae57300e0
Rotation-fixing happens for a couple of hard-coded statnums that presumably
never move (DEFAULT, STANDABLE, FX, FALLER, LIGHT), but for actors it wouldn't
make sense since the common case is that they do move. For this reason, bit 4
was introduced in r1934. The position of such useractors will not diverge
due to error roundoff accumulation in rotating sectors (SE0, train).
git-svn-id: https://svn.eduke32.com/eduke32@3316 1a8010ca-5511-0410-912e-c29ae57300e0
Unconditionally enabled, but useful for comparing the behavior of the 1-column
vline functions against the 2- or 4-column ones.
git-svn-id: https://svn.eduke32.com/eduke32@3311 1a8010ca-5511-0410-912e-c29ae57300e0
The former is really only a workaround. Walls/vertical sprites/pskies with
ysize 512 (and presumably greater, but this was not tested) are rendered
with one shade higher at the borders (1 pixel vlines) because of a certain
assumption in the ASM (see comments there). With very dark shades, the
palookup[] buffer is accessed oob. We simply allocate 256 bytes more at the
end for each.
The latter is only for CLASSIC_NONPOW2_YSIZE_WALLS builds, which is not enabled
yet. It seems to matter only for the uncommon case where the such pskies repeat
in the height. A 1680x1050 window fully covered with such a sky is then rendered
at about 60/85 the FPS for me (mostly due to not using the 4 pixel vline
routines), so it may be leaning a bit too much on the side of correctness.
A compilation switch DEBUG_TILESIZY_512 is introduced in engine.c for
demonstration purposes.
git-svn-id: https://svn.eduke32.com/eduke32@3310 1a8010ca-5511-0410-912e-c29ae57300e0
- If aiming at a swapped bottom wall, display "Wall <wallnum> -> <otherwallnum>"
- highlight pic, shade, pal, cstat in yellow then
- in printext256, accept at most 3 digits for the color format string (e.g. ^123)
git-svn-id: https://svn.eduke32.com/eduke32@3308 1a8010ca-5511-0410-912e-c29ae57300e0
That is, everything concerning orientation. Previously, it was wrongly
the bitwise NOT of these bits that got taken over. In particular, if bit
2 (swap bottom walls) would get pasted, ridiculousness could ensue.
git-svn-id: https://svn.eduke32.com/eduke32@3306 1a8010ca-5511-0410-912e-c29ae57300e0
Implemented using GL_LINEAR fog. The only source of difference (besides the
obvious indexed vs. true color) should now be the distance constant, which
still had to be determined experimentally. Polymer implements this mode in
its fog fragment program part.
Parallaxed skies are always drawn with full visibility, I'm not sure if there
are any maps that expect otherwise.
Also, accidentally committed: factor out initialization code from
polymost_printext256() into gen_font_glyph_tex(), small game.c changes.
git-svn-id: https://svn.eduke32.com/eduke32@3301 1a8010ca-5511-0410-912e-c29ae57300e0
It was caused by the definition of c_dfDIJoystick using literal 24 and 16 values in place of sizeof(DIDATAFORMAT) and sizeof(DIOBJECTDATAFORMAT), which include pointers. On 64-bit, the values end up being 32 and 24, causing a discrepancy in which DIERR_INVALIDPARAM was thrown.
1b1e05db06/diffs
git-svn-id: https://svn.eduke32.com/eduke32@3300 1a8010ca-5511-0410-912e-c29ae57300e0
- Updated to use StackWalk64 function call, requiring some addition of headers from MinGW-w64 to compile with MinGW.
- Code added to support 64-bit executables: functionality added and one warning fixed.
- New DLL binaries compiled using i686-MinGW-w64 and x86_64-MinGW-w64. (Oddly, the DLL built with MinGW is 5 MB while MinGW-w64's is 1 MB.)
git-svn-id: https://svn.eduke32.com/eduke32@3299 1a8010ca-5511-0410-912e-c29ae57300e0
This also means that the "r_shadescale_unbounded 0" option will work
in Polymer (except on models).
git-svn-id: https://svn.eduke32.com/eduke32@3286 1a8010ca-5511-0410-912e-c29ae57300e0
This global option will set bit 1024 and clear bits 256 and 512 for all
rotatesprite calls, fixing complex HUD drawing code relying on precise
alignment of individual elements (widescreen rotatesprite is entirely
unsuitable for this purpose).
git-svn-id: https://svn.eduke32.com/eduke32@3284 1a8010ca-5511-0410-912e-c29ae57300e0
This includes a complete Windows header and library refresh, including the addition of 64-bit compiled libs:
*libogg 1.3.0
*libvorbis 1.3.3
*zlib 1.2.7
*libpng 1.5.13
*libvpx 9a3de881c0e681ba1a79a166a86308bbc84b4acd
*SDL_mixer 1.2.12 (for RENDERTYPE=SDL)
*DirectX import libraries: dsound and dxguid (now included)
To build in 64-bit, you essentially need MinGW's MSYS (but not MinGW itself) and MinGW-w64 at the top of your PATH. The target is automatically detected using `$(CC) -dumpmachine`. The EDukeWiki will get detailed instrucitons.
All compiler and linker warnings when building in 64-bit mode have been fixed.
Remaining 64-bit to-do:
- The ebacktrace dll does not build under 64-bit. It uses code specific to the format of 32-bit executables and will have to be ported to work with 64-bit executables. A future 64-bit version will be named ebacktrace1-64.dll.
- RENDERTYPE=SDL crashes in SDL_mixer's Mix_Linked_Version().
- DirectInput gives an error and does not function. This only affects joysticks, and the error never happens without any plugged in.
- Port the classic renderer ASM to 64-bit. (Just kidding, this is way out of my league.)
This commit includes a fair bit of Makefile development spanning all platforms, including simplifying the SDLCONFIG code, fixing build on Mac OS X (thanks rhoenie!), globally factoring Apple brew/port inclusion, enforcing that all -L come before all -l, and ensuring that $(shell ) is always :='d.
In addition, I have resurrected the old GCC_MAJOR and GCC_MINOR detection using `$(CC) -dumpversion`, but I have made it failsafe in case the command fails or the version is manually specified. I have applied this new fine-grained detection where applicable, including allowing LTO, and restraining -W's to versions that support them.
git-svn-id: https://svn.eduke32.com/eduke32@3278 1a8010ca-5511-0410-912e-c29ae57300e0
Set up the use of {Windows,Apple}/{include,lib} regardless of feature toggles in Makefile.common using $(abspath ) in reference to the directory Makefile.common is in.
Add the three DirectX headers that are actually used to the repo. (from: http://alleg.sourceforge.net/files/dx9mgw.zip)
Since current MinGW versions include DirectX libs (for dynamic linking), remove "-L$(DXROOT)/lib".
The DirectX headers are no longer a separate dependency for building.
Add $(SDLROOT_OVERRIDE). $(SDLROOT) only functions for Windows and Mac OS X.
Factor handling of $(DXROOT_OVERRIDE) and $(SDLROOT_OVERRIDE) into Makefile.shared using $(abspath ).
git-svn-id: https://svn.eduke32.com/eduke32@3275 1a8010ca-5511-0410-912e-c29ae57300e0
Also, fix deficient logic in Gv_Free and Gv_Clear (both M32 and CON) so that gamevar and gamearray erasure results are (closer to) correct, and so that the game does not crash when system arrays are accessed from CON because they all have been nulled.
git-svn-id: https://svn.eduke32.com/eduke32@3274 1a8010ca-5511-0410-912e-c29ae57300e0
As a note, libvorbis' vorbis_comment_query() checks for tags case-insensitively.
(This was done to support the output of vgmstream's "test.exe -g".)
git-svn-id: https://svn.eduke32.com/eduke32@3273 1a8010ca-5511-0410-912e-c29ae57300e0
Disabling netcode compilation can be interesting on memory-constrained
systems, or those that have no means of accessing the network anyway.
Note: I'm OK with maintaining this myself, i.e. it's fine if netcode dev
breaks compilation with NETCODE=0.
git-svn-id: https://svn.eduke32.com/eduke32@3260 1a8010ca-5511-0410-912e-c29ae57300e0
... instead of switch/case-ing them in A_CheckEnemyTile().
Because this requires bumping BYTEVERSION, we also get rid of the
excess trailing bytes in the save game's "rest" data. (See r3052.)
git-svn-id: https://svn.eduke32.com/eduke32@3257 1a8010ca-5511-0410-912e-c29ae57300e0
That is, fix some oversights introduced in the preceding runs.
listglobals.sh is a helper to find global accesses.
Translator: add "number-conversion" warning option, max. error limit.
git-svn-id: https://svn.eduke32.com/eduke32@3256 1a8010ca-5511-0410-912e-c29ae57300e0
- more codegen
- make more members const, some char unsigned
- fix some "geom" metamethods
- '^' operator
git-svn-id: https://svn.eduke32.com/eduke32@3253 1a8010ca-5511-0410-912e-c29ae57300e0
Commit breaks MSVC builds by failing to provide NOWARN macros to MSVC.
git-svn-id: https://svn.eduke32.com/eduke32@3232 1a8010ca-5511-0410-912e-c29ae57300e0
The attribute is set per tile from DEF: either
nofullbrightrange <begintile> <endtile>
or
tilefromtexture <tile> { ... nofullbright ... }
As a special case, the list may only contain "nofullbright", in which case the
texture is not changed. (This is analogous to "texhitscan".)
Example:
// make piggy's eyes fullbright red only when it fires the shotgun
nofullbrightrange 2000 2034
nofullbrightrange 2040 2049
nofullbrightrange 2055 2061
git-svn-id: https://svn.eduke32.com/eduke32@3230 1a8010ca-5511-0410-912e-c29ae57300e0
The two uses are from hitscan and neartag. The functionality is reproduced
exactly (assuming I made no mistake), down to different distance checking
(<= vs. <).
git-svn-id: https://svn.eduke32.com/eduke32@3228 1a8010ca-5511-0410-912e-c29ae57300e0
This introduces winbits.[ch] in the engine, containing layer-independent code migrated from winlayer, including nedmalloc, ebacktrace1, OS version detection, and high-resolution profiling timers.
sdlayer has been expanded to include the code from winbits under _WIN32.
All uses of RENDERTYPEWIN in the source have been examined and changed to _WIN32 (or removed) where the block in question is layer-independent.
git-svn-id: https://svn.eduke32.com/eduke32@3221 1a8010ca-5511-0410-912e-c29ae57300e0
This needs improvements to bring it up to par with winlayer, but it is functional. In particular, a good amount of code from winlayer could be used for both layers, including the profiling timers, the version printing code, and the hInstance and hModule sharing.
Known problems: the mouse cursor is not trapped, and the game starts before the startup window shows options.
git-svn-id: https://svn.eduke32.com/eduke32@3219 1a8010ca-5511-0410-912e-c29ae57300e0
Loops are controlled by two tags in the Vorbis Comment, both in PCM samples.
LOOP_START holds the beginning of the loop, the position to which playback returns at the end of the loop.
LOOP_END is optional; it holds the end of the loop, after which the game seeks to LOOP_START. If undefined, the end of the OGG is the end of the loop. The primary purpose of LOOP_END is if you want to give your file a proper ending for listening outside the game.
To preview a looped OGG you have assembled, give it a ".logg" extension and play it using the vgmstream plugin for Winamp or foobar2000.
git-svn-id: https://svn.eduke32.com/eduke32@3218 1a8010ca-5511-0410-912e-c29ae57300e0
The redundant ones are in code like this: s->cstat = (int16_t)32768;
Because the value is eventually converted to the type of "s->cstat", any
casts to integral types having at least as many bits are no-ops, signedness
being irrelevant due to (probably any two's complement arch targeting
compiler's) bit-pattern preserving semantics of these conversions.
The now incorrect one is: if (lotag == (int16_t) 65535),
"int32_t lotag" being read from a wall or sprite struct directly earlier.
Now, with these members being unsigned, and (int16_t)65535 equalling -1,
the check always fails. The correction fixes normal switches having such
a lotag ending the level immediately.
In short: integer casts before assignments are unnecessary, those in reads
highly relevant!
git-svn-id: https://svn.eduke32.com/eduke32@3211 1a8010ca-5511-0410-912e-c29ae57300e0
Rewriting them in the obvious way, i.e. by casting the expression
to int16_t first. (That is, this commit is the reverse of r3174,
but with casts applied.) This fixes at least one regression: a
FIREEXT with a hitag of 0 should not be linked with same-
(that is, zero-) tagged SEENINEs or OOZFILTERs.
Mind the corner cases!
git-svn-id: https://svn.eduke32.com/eduke32@3210 1a8010ca-5511-0410-912e-c29ae57300e0
- provide functions instead of messing with CONTROL_*Binds directly
- comment out a few more unused functions
- make clear what memory (alloc'd or const char *) 'keybind' members use
- for keys with no name, use "<?>"
git-svn-id: https://svn.eduke32.com/eduke32@3209 1a8010ca-5511-0410-912e-c29ae57300e0
This function also changed: it doesn't handle floor-aligned sprites now,
and the z offset is returned instead of set by pointer.
git-svn-id: https://svn.eduke32.com/eduke32@3205 1a8010ca-5511-0410-912e-c29ae57300e0
Using non-keypad [-]/[+] or LMB + mousewheel, it was broken when a void
tile was in between.
git-svn-id: https://svn.eduke32.com/eduke32@3203 1a8010ca-5511-0410-912e-c29ae57300e0
The size of that struct is currently 4, and its layout almost the same as
what is read in with loadpics(). The number of tiles in an animation is
bumped to 256, so that the max. tile difference in DEF's animtilerange is
255. (There's no way to have such animations from ART.)
git-svn-id: https://svn.eduke32.com/eduke32@3202 1a8010ca-5511-0410-912e-c29ae57300e0
This means that the internal change done to these sprite members in r3159 is
hidden from CON for backward-compatibility purposes. Note that .cstat and
.{ceiling,floor}stat aren't touched, and will return unsigned values to CON.
git-svn-id: https://svn.eduke32.com/eduke32@3189 1a8010ca-5511-0410-912e-c29ae57300e0
I think this may fix some negative "non-profiled overhead" that I
have been seeing.
git-svn-id: https://svn.eduke32.com/eduke32@3182 1a8010ca-5511-0410-912e-c29ae57300e0
Notes:
- Atomic Edition (Censored) -> Plutonium Pak in grpscan.c
- "scale" in astub.c:drawtileinfo() is incorrect, I think.
- in demo.c, the gethitickms() value should be returned to a double.
git-svn-id: https://svn.eduke32.com/eduke32@3178 1a8010ca-5511-0410-912e-c29ae57300e0
NOTE: changes such as these are best viewed with something like
git diff (...) --color-words='[a-zA-Z0-9_]+|[^[:space:]]'
git-svn-id: https://svn.eduke32.com/eduke32@3176 1a8010ca-5511-0410-912e-c29ae57300e0
Note the type change of vplce[] in engine.c: int32_t -> uint32_t.
git-svn-id: https://svn.eduke32.com/eduke32@3172 1a8010ca-5511-0410-912e-c29ae57300e0
This reverts r3159..r3161.
Conflicts:
eduke32/build/include/compat.h
(Handled so that r3163's changes are kept applied.)
git-svn-id: https://svn.eduke32.com/eduke32@3165 1a8010ca-5511-0410-912e-c29ae57300e0
- Eliminate use of the C++ standard library from arttool. I improved some of the program's workings but it continues to corrupt my art files in certain circumstances. (Note: Not a regression; it happens with previous revisions.)
- Construct "make utils" for the game side following the pattern of the engine.
- Move ivfrate to this new distinction.
- Minor Makefile cleanup and tweaks, mainly to facilitate CLANG=1 and to formalize text output in special cases.
git-svn-id: https://svn.eduke32.com/eduke32@3163 1a8010ca-5511-0410-912e-c29ae57300e0
I think there's also a fix for the CON precache system breakage in here (lost it in my local tree when I started getting the C++ build working in MSVC, sorry!)
git-svn-id: https://svn.eduke32.com/eduke32@3159 1a8010ca-5511-0410-912e-c29ae57300e0
Specifically, if the first wall of the sector-to-split is to the left or right
of the *start* of the splitting line AND the sector has no TROR extensions,
make these two the new nextwalls of the respective split sectors.
git-svn-id: https://svn.eduke32.com/eduke32@3157 1a8010ca-5511-0410-912e-c29ae57300e0
Exporting only (de)compression functions. Also, different reader/writer
functions can be set.
git-svn-id: https://svn.eduke32.com/eduke32@3153 1a8010ca-5511-0410-912e-c29ae57300e0
It would be something like "ProjectileData\[([^]]+)]\.([a-z_]+)".
git-svn-id: https://svn.eduke32.com/eduke32@3152 1a8010ca-5511-0410-912e-c29ae57300e0
This requires ripping out the .proj member of tiledata_t back into
ProjectileData[] again because it was the only one in g_tile[] that
changed during the course of a game. The g_tile[] array is now also
correctly flagged as "constant throughout a game" (DS_NOCHK).
Savegame version bumped.
git-svn-id: https://svn.eduke32.com/eduke32@3151 1a8010ca-5511-0410-912e-c29ae57300e0
It's still not pretty though since there's no interpolation from G_DrawRooms().
git-svn-id: https://svn.eduke32.com/eduke32@3149 1a8010ca-5511-0410-912e-c29ae57300e0
On the engine side (functions starting with L_), there are now the basic
parts like state creation and running code from strings and files.
The game and editor can add to that by e.g. loading whatever they please
into the state. Their functions start with El_ and Em_, respectively.
The Lua scripts still reside in source/lunatic, even for the common ones.
This is because they will be embedded into the binaries as bytecode or
compressed source eventually, so their location on disk will be irrelevant.
git-svn-id: https://svn.eduke32.com/eduke32@3148 1a8010ca-5511-0410-912e-c29ae57300e0
Also, enable showing sprites in Mapster32's overhead view again, since that
was one (the only?) use of that code path. The uninitialized read was
introduced in r2927.
git-svn-id: https://svn.eduke32.com/eduke32@3144 1a8010ca-5511-0410-912e-c29ae57300e0
Also, reorganize some G_DrawRooms() code a little without changing anything.
git-svn-id: https://svn.eduke32.com/eduke32@3143 1a8010ca-5511-0410-912e-c29ae57300e0
Instead of later in P_ProcessInput(). This fixes one drawrooms() call in
between where the sectnum is the camera's, but the position the player's,
which can lead to a slow "outer view" render in Polymer.
git-svn-id: https://svn.eduke32.com/eduke32@3142 1a8010ca-5511-0410-912e-c29ae57300e0
arrays; any write access to them will run the corresponding hook and write
to the [sector/wall/sprite/tsprite]clean array.
Note: tsprite and sprite use the same hook and require running a few more
instructions per access in order to disambiguiate; this could be made more
optimal (like the other arrays) by clearly separating the types in the game
code.
Note #2: taking a member's address currently marks it dirty because of tons
of helper functions across the editor code. I don't know how many read-only
accesses we have after taking a member address, but it could also be fixed
with some finessing of the code.
git-svn-id: https://svn.eduke32.com/eduke32@3138 1a8010ca-5511-0410-912e-c29ae57300e0
The command-line utility can query and set the frame rate of IVF files, since
apparently encoders don't care too much about setting proper values in the IVF
header. Also, add the utility to the synthesis build.
On the playback side in EDuke32, get rid of the 1/(2*fps) "correction" if the
FPS numerator is <1000 (presumably used in older encoders) and properly print
the frame rate's fractional part.
git-svn-id: https://svn.eduke32.com/eduke32@3131 1a8010ca-5511-0410-912e-c29ae57300e0
This means that the "Keyboard Setup" should now properly reflect the bindings,
except in the theoretical case of one gamefunc being bound more than two keys.
(What was fixed is the one key to many gamefuncs case.)
git-svn-id: https://svn.eduke32.com/eduke32@3126 1a8010ca-5511-0410-912e-c29ae57300e0
That section was only ever read in for little profit and never written
out! Keyboard input is actually dispatched as OSD commands for a good
while, so that old cruft has to go!
git-svn-id: https://svn.eduke32.com/eduke32@3125 1a8010ca-5511-0410-912e-c29ae57300e0
- Remove everything using CONTROL_KeyMapping, which was only written to.
- Remove unused functions, make local ones static.
- Remove private function declarations in _control.h.
git-svn-id: https://svn.eduke32.com/eduke32@3124 1a8010ca-5511-0410-912e-c29ae57300e0
separate tracker type by #defining __TRACKER_NAME and __TRACKER_GLOBAL_OFFSET.
eg.:
Then if you have a tracked value and a value of the same type at the given offset:
Tracker_1<int32_t> trackedInt;
int32_t trackedIntDirty = 0; // 4 bytes after
trackedIntDirty will become 1 everytime trackedInt changes.
git-svn-id: https://svn.eduke32.com/eduke32@3119 1a8010ca-5511-0410-912e-c29ae57300e0
Credit to Plagman for the idea and doing the work on the game side, which is included in this commit.
(Building as C++ will give us features with which we can make improvements and optimizations on the multiplayer code and Polymer.)
git-svn-id: https://svn.eduke32.com/eduke32@3116 1a8010ca-5511-0410-912e-c29ae57300e0
This is done by pressing LShift and
- holding down the left mouse button for scaling, or
- the right mouse button for rotating the highlighted walls/sprites
with respect to a pivot point determined as the center of the bounding box of
all highlighted points.
Note that scaling sectors isn't that easy and the current functionality is very
rudimentary: there's no z scaling, no xrepeat correction, and sprites aren't
touched expect for their position. The user is responsible to maintain map
consistency, for example to prevent wall-lines of the same sector crossing
each other.
git-svn-id: https://svn.eduke32.com/eduke32@3113 1a8010ca-5511-0410-912e-c29ae57300e0
We do this by messing with the GL texture that gets uploaded for CHAINGUN.
Since this is implemented on the engine side, the static value for CHAINGUN
(2536) is used, and the tile dimensions are compared to 211x55 to have a
little confidence that the tile wasn't overridden by a mod. Hack indeed.
git-svn-id: https://svn.eduke32.com/eduke32@3111 1a8010ca-5511-0410-912e-c29ae57300e0
Currently, the FPS determination is based on libvpx's vpxdec.c code, which uses
the FPS provided in the IVF file in one case, and simply sets it to 30 FPS in
the other. For the first case, a "correction" is carried out for something
which the comments suggest to originate from other (old?) VPX encoder versions.
git-svn-id: https://svn.eduke32.com/eduke32@3110 1a8010ca-5511-0410-912e-c29ae57300e0
When LShift is pressed and the mouse is over a linking sprite (as determined by
the tag labeling system), lines are drawn to all other sprites, and pressing
[ or ] will cycle these then. False positives and missed sprites are possible.
Additional changes:
- consider SE 31 and 32's lotag to NOT be linking, since the ACTIVATOR is what
matters. The original maps are inconsistent there.
- When pressing Alt+[ or Alt+] and there are no corruptions, say so instead of
doing [ or ].
git-svn-id: https://svn.eduke32.com/eduke32@3108 1a8010ca-5511-0410-912e-c29ae57300e0
This event is useful in certain circumstances where you want to skip a menu/screen value and the design of the monster switch statement would require the M_ChangeMenu() call to be intercepted or the unwanted screen will flash for a split second.
git-svn-id: https://svn.eduke32.com/eduke32@3101 1a8010ca-5511-0410-912e-c29ae57300e0
These control the maximum difference in height between two sectors that the player will automatically traverse without needing to jump.
The latter controls the special case when the player's sector's lotag is ST_1_ABOVE_WATER or p->spritebridge == 1.
BYTEVERSION bumped.
git-svn-id: https://svn.eduke32.com/eduke32@3100 1a8010ca-5511-0410-912e-c29ae57300e0
* Centralize optimization strategies in Makefile.common. This required moving detection of $(PLATFORM), which makes sense if we work on the paradigm that Makefile.common is for generic compiler setup and Makefile.shared works with libraries and things closer to the engine and game code itself.
* New Makefile variables OPTOPT (Optimization Options) and CUSTOMOPT (Custom Optimizations). OPTOPT by default contains -march, -mtune, etc. Setting this variable from Make invocation will blank these. CUSTOMOPT (Custom Optimizations) works the same but in an additive fashion, overwriting nothing. Technically CUSTOMOPT could stand for (Custom Options) and include any additional parameters sent to both linker and compiler.
* Factor out literal names of the main executables.
* The build process now prints assembler (if NOASM=0) and linker settings in addition to compiler settings.
git-svn-id: https://svn.eduke32.com/eduke32@3096 1a8010ca-5511-0410-912e-c29ae57300e0
This commit also adds the NOTELEPORT sprite flag, which of course prevents sprites from teleporting.
git-svn-id: https://svn.eduke32.com/eduke32@3094 1a8010ca-5511-0410-912e-c29ae57300e0
And hook it up to SE cstat 64 ('1' in mapster32). This disables both lightmaps
and shadow maps for the spotlight; please let me know if you have a usecase
where you want lightmaps but no shadow maps for specific lights.
git-svn-id: https://svn.eduke32.com/eduke32@3091 1a8010ca-5511-0410-912e-c29ae57300e0
The attribute is set per tile from DEF: either
texhitscanrange <begintile> <endtile>
or
tilefromtexture <tile> { ... texhitscan ... }
(As a special case, the list may only contain "texhitscan", in which case the
texture is not changed.)
In passing, do some cleanup for "tilefromtexture" DEF parsing: the list tokens
should now be accepted in any order, and errors don't appear in the middle of
the list parsing.
git-svn-id: https://svn.eduke32.com/eduke32@3078 1a8010ca-5511-0410-912e-c29ae57300e0
Submersion only happens when the upper sector has lotag 1 and its vertical
neighbor has lotag 2 (this can be useful to create non-submergible above-water
sectors). Currently, only the player is handled. On the implementation side,
the water handling code is split into P_Submerge() and P_Emerge() preparing the
"teleportation", and P_FinishWaterChange() for the finalization.
git-svn-id: https://svn.eduke32.com/eduke32@3072 1a8010ca-5511-0410-912e-c29ae57300e0
Initial determination is based purely on distance/volume, and if two qualifying sounds have the same distance/volume the one which started playback first is the one that gets the axe.
Feedback from other developers welcome.
git-svn-id: https://svn.eduke32.com/eduke32@3065 1a8010ca-5511-0410-912e-c29ae57300e0
Going to extremes to avoid code duplication like the plague, but at
least it's great to learn about the whole function environment business.
git-svn-id: https://svn.eduke32.com/eduke32@3060 1a8010ca-5511-0410-912e-c29ae57300e0
The Makefile now has separate {GAME,EDITOR}LDFLAGS, so the correct
dynamic symbol list can be specified.
git-svn-id: https://svn.eduke32.com/eduke32@3057 1a8010ca-5511-0410-912e-c29ae57300e0
sizeof(_prlight) differs across compilers, and besides, Polymer lights were
not loaded anyway (they're restored live in-game later). The savegame version
was not bumped, but only savegames made with builds where sizeof(_prlight)==261
(like synthesis) will stay compatible!
Report and helpful debugging information by LeoD.
git-svn-id: https://svn.eduke32.com/eduke32@3052 1a8010ca-5511-0410-912e-c29ae57300e0
... and displaying statistics afterwards. It was easier to do it this way
than porting stat.lua to C and especially adding more logic to the already
spaghetti-like demo playback code.
git-svn-id: https://svn.eduke32.com/eduke32@3049 1a8010ca-5511-0410-912e-c29ae57300e0
Instead of having 'noalreadyrefd' as a 'corruptcheck' subcommand.
This way, TAB completion can be had.
git-svn-id: https://svn.eduke32.com/eduke32@3047 1a8010ca-5511-0410-912e-c29ae57300e0
This means that loadoldboard() now should also initialize Polymer map
info after loading a v5/v6 map. Make the variables holding a file descriptor
an int32_t instead of int16_t.
git-svn-id: https://svn.eduke32.com/eduke32@3044 1a8010ca-5511-0410-912e-c29ae57300e0
- make inside_editor() static in build.c
- replace comparisons of inside()'s return values with 0 by ones with 1
(since a returned 0 can mean -1 or 1, i.e. oob sector or is really inside)
- prevent a theoretically possible oob access in correct_ornamented_sprite()
git-svn-id: https://svn.eduke32.com/eduke32@3038 1a8010ca-5511-0410-912e-c29ae57300e0
- factor out the "is inside" predicates
- rename updatesector_onlynextwalls() -> updatesectorbreadth()
- add ATTRIBUTE((nonnull(4))) to the bitmap arg of updatesectorexclude().
git-svn-id: https://svn.eduke32.com/eduke32@3037 1a8010ca-5511-0410-912e-c29ae57300e0
It's mostly taking over the NASM code, with a couple of changes:
- declarations for externals and globals are slightly different
- the masm seems to have e.g. "dword ptr [...]" where the nasm has only
"dword [...]", though the masm also has a couple of the latter. The "ptr"
modifier seems kinda redundant to me, but I added it to every indirection
anyway.
git-svn-id: https://svn.eduke32.com/eduke32@3033 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, we used them in our builds for sprites, but MSVC builds don't have
the ASM ported to MASM, and thus the workaround of ignoring the linking errors
was not safe.
git-svn-id: https://svn.eduke32.com/eduke32@3031 1a8010ca-5511-0410-912e-c29ae57300e0
Also, add convenience wrapper script findmaps.sh for quickly searching for
sprites/walls/sectors satisfying a certain condition in all map files under
a given directory.
git-svn-id: https://svn.eduke32.com/eduke32@3030 1a8010ca-5511-0410-912e-c29ae57300e0
Requested auto-correction will place such sprites at their sector's first point.
git-svn-id: https://svn.eduke32.com/eduke32@3029 1a8010ca-5511-0410-912e-c29ae57300e0
Hendricks found a bug caused by that commit, so this one enables exprimentation
with setbrightness() bit 1 behavior.
git-svn-id: https://svn.eduke32.com/eduke32@3025 1a8010ca-5511-0410-912e-c29ae57300e0
See the comment in source/osdcmds.c for instructions on its usage.
git-svn-id: https://svn.eduke32.com/eduke32@3021 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the splitscreen mod not have a ridiculous view distortion.
Such scenes will have no correction for non-square pixels, though.
git-svn-id: https://svn.eduke32.com/eduke32@3020 1a8010ca-5511-0410-912e-c29ae57300e0
While we're at it, factor out duplicate code into P_ChangeWeapon().
git-svn-id: https://svn.eduke32.com/eduke32@3015 1a8010ca-5511-0410-912e-c29ae57300e0
Specifically, use the elevator's own ceiling z height instead of searching
nextsectors with nextsectorneighborz(). This makes maps like L9.map (Spaceport
from N64) or DEMOUNT.MAP work. [Note well: work at all, since if it happened
to work before, that was pure coincidence.]
git-svn-id: https://svn.eduke32.com/eduke32@3013 1a8010ca-5511-0410-912e-c29ae57300e0
- duke3d.h: comment the timing marcos a bit more
- factor out smoothratio calculation
- (TICRATE/TICSPERFRAME) --> REALGAMETICSPERSEC
git-svn-id: https://svn.eduke32.com/eduke32@3007 1a8010ca-5511-0410-912e-c29ae57300e0
Also, correct some comments made in the demo source made earlier. Oops.
git-svn-id: https://svn.eduke32.com/eduke32@3006 1a8010ca-5511-0410-912e-c29ae57300e0
A new function maybe_append_ext() is added to common.c and used in the handling
of the -d<demo.edm> cmdline parameter and the 'map' OSD command with one
non-wildcard arg. (It's slightly different from the way the extension was
maybe-appended previously.)
git-svn-id: https://svn.eduke32.com/eduke32@3004 1a8010ca-5511-0410-912e-c29ae57300e0
Also, don't stop playback cycling at the 10th demo and show the demo
number when beginning to record one.
git-svn-id: https://svn.eduke32.com/eduke32@3003 1a8010ca-5511-0410-912e-c29ae57300e0
This currently says that MP saving/loading isn't supported, but doesn't
really work correctly. Also, properly bound-check the immediate argument
to CON's 'save' command and one more ... -> G_HandleAsync().
git-svn-id: https://svn.eduke32.com/eduke32@2999 1a8010ca-5511-0410-912e-c29ae57300e0
... and use it in three places. In two of these uses,
1) CON {read,write}arrayfromfile and
2) G_SavePlayer,
display an error message if the file name such generated is too long.
In the CON commands of 1), also error out if the file couldn't be opened.
git-svn-id: https://svn.eduke32.com/eduke32@2997 1a8010ca-5511-0410-912e-c29ae57300e0
A macro MAYBE_FCLOSE_AND_NULL(fileptr) is introduced in compat.h that does
what it says.
git-svn-id: https://svn.eduke32.com/eduke32@2995 1a8010ca-5511-0410-912e-c29ae57300e0
This trims four 4k pages of code from the release EDuke32 build and
one page from Mapster32.
git-svn-id: https://svn.eduke32.com/eduke32@2991 1a8010ca-5511-0410-912e-c29ae57300e0
When this happens, parallaxmodes other than 0 will be unavailable and silently
draw as parallaxmode 0. This usually happens with extremely wide resolutions.
git-svn-id: https://svn.eduke32.com/eduke32@2990 1a8010ca-5511-0410-912e-c29ae57300e0
We're pulling stuff from math.h even in non-GL builds right now, so
adding libc's sin() and atan() doesn't seem like a big deal. In the
unlikely event that their accuracy is so bad that the calculated tables
don't match the original ones, a warning is issued on little-endian
platforms.
git-svn-id: https://svn.eduke32.com/eduke32@2988 1a8010ca-5511-0410-912e-c29ae57300e0
This is one of the cases where the duplicated code has minor modifications
at each site. These are handled by function args here.
git-svn-id: https://svn.eduke32.com/eduke32@2983 1a8010ca-5511-0410-912e-c29ae57300e0
