quakeforge

mirror of https://git.code.sf.net/p/quake/quakeforge synced 2024-12-23 19:21:14 +00:00

Author	SHA1	Message	Date
Bill Currie	8bcef272e6	Render the id skys :) Wow... smooth.	2012-01-11 21:26:12 +09:00
Bill Currie	7ba7130f42	Load the sky texture as two separate textures. The sky texture is normally 256x128, with each 128 wide side being the two layers of the sky.	2012-01-11 21:09:57 +09:00
Bill Currie	b43d03a98b	Let the render specific texture loader decide on sky texture loading. This is necessary to allow the glsl texture loader to process the sky textures.	2012-01-11 21:08:04 +09:00
Bill Currie	f6f2e4f406	Create and load the id sky shader.	2012-01-11 16:02:20 +09:00
Bill Currie	89ae6eca8b	Even better? It's difficult getting the same result because GL st are 0-1 but sw quake's st are 0-inf % 64.	2012-01-11 07:51:15 +09:00
Bill Currie	5dbf913d41	Get the turbulence more correct. This looks right, and should be easier to tweak.	2012-01-11 06:38:27 +09:00
Bill Currie	d2dae4cc58	Produce a saner turbulence. I'm not quite sure it's right. Need to watch sw's turb a bit more.	2012-01-10 21:11:21 +09:00
Bill Currie	3508972d66	Draw water surfaces... with some really funky turbulence. It seems I misunderstood the sw turbulence code.	2012-01-10 20:50:47 +09:00
Bill Currie	e38d72f50b	Get brush entity rendering working. Unfortunately, the intel driver on my eeepc doesn't like the mipmas for plat_top2 or +2floorsw. If I either don't load their mipmaps, or skip drawing them, things seem to work nicely.	2012-01-10 13:06:02 +09:00
Bill Currie	3326aceed8	Rewrite the texture chain index list building. It turns out my complicated plan was just that: complicated. Although there are currently some bugs, the method I used to build the VBO in the first place will work equally well for building the index lists.	2012-01-09 21:16:08 +09:00
Bill Currie	754dda92ff	Get the lightmap texture properly.	2012-01-09 21:13:40 +09:00
Bill Currie	ef311b60d6	Remove a now dead function.	2012-01-09 18:55:30 +09:00
Bill Currie	2b45cd693f	Fix the black overbright dlights. t was unsigned and underflowing. This fixes the problem but keeps the bitshift unsigned clean.	2012-01-09 18:05:41 +09:00
Bill Currie	310ba49f17	Make the dynamic lightmaps... dynamic.	2012-01-09 16:46:20 +09:00
Bill Currie	0005c97865	Temporary weaks so things look halfway decent. GL mipmaps and paletted textures don't mix, and lightmaps work quite well with linear sampling.	2012-01-09 16:26:28 +09:00
Bill Currie	12fd6bd390	Fix the segfault on map change. I had forgotten to call R_ClearTextures when I'd rearranged the code.	2012-01-09 10:16:54 +09:00
Bill Currie	cd91fe7c8d	Set the pixel unpack alignment to 1. 4 hours chasing that one down. ouch.	2012-01-09 02:18:39 +09:00
Bill Currie	8779755e9c	Dump allocated rects for glsl_scraps BLAH.	2012-01-09 01:31:29 +09:00
Bill Currie	f658e6c32e	Initialize d_lightstylevalue. "Let there be light!", but chaos still reigns (broken lightmap updates).	2012-01-09 01:30:26 +09:00
Bill Currie	1229d24ef6	Get world rendering mostly working. Just some problems with lightmaps. There also seem to be some issues with seams (t-junctions?) and far clip, but they're quite separate. There's also a problem with a segfault when loading a second map.	2012-01-08 22:09:51 +09:00
Bill Currie	7428a91526	Try, but fail, to render the world.	2012-01-08 20:39:36 +09:00
Bill Currie	ea377b80c5	Remove some redundate statements.	2012-01-08 20:38:56 +09:00
Bill Currie	f8d7bcf271	Rename R_RecursiveWorldNode to R_VisitWorldNodes in gl.	2012-01-08 18:16:33 +09:00
Bill Currie	6abaa5ea74	Build the display list for all loaded brush models. The entire vertex set from every model is put into one list (not yet uploaded). chains of elements arrays are build for non-instanced models (instanced models will have their chains built each frame).	2012-01-08 17:45:44 +09:00
Bill Currie	fa82c37bd0	Pre-invert subpic->size. I forgot to do this earlier :/	2012-01-08 17:44:28 +09:00
Bill Currie	601cc6e3d1	Make a start on bsp rendering. Still nothing being rendered: still in the process of building the display lists, but I'm making good progress. Get this into git before something goes wrong :)	2012-01-08 10:29:38 +09:00
Bill Currie	ec7d01f9b2	Merge out R_TextureAnimation.	2012-01-08 10:21:08 +09:00
Bill Currie	655252a506	Fix some warnings.	2012-01-07 23:11:56 +09:00
Bill Currie	aa27a3f49c	Load bsp model textures as repeating mipmaps.	2012-01-07 18:05:54 +09:00
Bill Currie	204c1aba03	Don't use the miptex_t after converting to texture_t.	2012-01-07 17:08:07 +09:00
Bill Currie	29a0dc0b68	Actually build the lightmaps, and fix a silly bug in the scrap allocator. Also, add a command for dumping scrap statistics.	2012-01-07 15:35:08 +09:00
Bill Currie	8a5658ed61	Implement the bulk of the lightmap code. Now just to get surface rendering going and hook in the lights.	2012-01-07 14:53:23 +09:00
Bill Currie	a988c192ab	Fix OSS sound. YAY!!! Much thanks to Spirit from quaddicted for his patient help in testing, and Spike for his heckling ;)	2012-01-06 21:21:45 +09:00
Bill Currie	0993803006	Add texture sub-image management. The planned uses are lightmaps and 2d icons.	2012-01-06 16:24:13 +09:00
Bill Currie	c25327f4ed	Add union and merge functions and tests.	2012-01-06 12:57:25 +09:00
Bill Currie	73f2c12815	Delete the intersection rect when finished.	2012-01-06 11:04:50 +09:00
Bill Currie	981760e19a	Add tests for vrect.	2012-01-06 11:04:34 +09:00
Bill Currie	2ae044effd	Split out vrect_t to its own file and add support functions. The rest is cleanup after removing a wart from one of the field names.	2012-01-06 09:52:14 +09:00
Bill Currie	42266cddd5	Get models being lit by the world's lightmaps. Even though the world isn't rendered yet.	2012-01-05 22:37:02 +09:00
Bill Currie	423e08ce21	Add demo to "movie" conversion. It currently writes a series of png files (QF/qfmvNNNNNN.png), at a fixed rate of 30fps, with no sound recording.	2012-01-05 19:19:37 +09:00
Bill Currie	b13a2b6dbd	Move screenshots to $fs_userpath/QF. I got tired of screenshots getting scatter across the tree. ShotsPath in the dirconf can override this.	2012-01-05 17:07:27 +09:00
Bill Currie	297a4e2756	Put the D_FlushCaches mess back. It turns out that when it is called is highly timing sensitive :( However, the rest of R_ClearState remains.	2012-01-05 15:50:20 +09:00
Bill Currie	03bcfb9483	Set the default hudtype. Yay, Deek for finding another bug in qf :). He had an old dirconf that didn't specify HudType and thus caused the status bar code to blow up. Set the default to "id" if none is found.	2012-01-05 14:02:53 +09:00
Bill Currie	764cd91879	Set the default hudtype. Yay, Deek for finding another bug in qf :). He had an old dirconf that didn't specify HudType and thus caused the status bar code to blow up. Set the default to "id" if none is found.	2012-01-05 14:00:57 +09:00
Bill Currie	6f18035c12	Fix up alias-16 support. After getting in contact with serplord, I now know that the sw alias loading was correct. Turns out the gl loaders was mostly correct, just a mistaken subtract rather than add. And with that, I can implement alias-16 support in glsl. better yet, since all the work is done in the loader, the renderer doesn't know anything about it :) However, I need to create some 16-bit models for testing.	2012-01-05 12:52:12 +09:00
Bill Currie	c6bcd7aedb	Normalize the vertex normals. I was wondering why the lighting looked a little extreme in overkill.	2012-01-05 12:45:43 +09:00
Bill Currie	bfc743fdcd	Add my point shaders before I lose them.	2012-01-04 18:47:03 +09:00
Bill Currie	8fbc6221f7	Get sprite interpolation working. It's not perfect (it can't be), but it looks a whole lot nicer than no interpolation.	2012-01-04 18:31:35 +09:00
Bill Currie	6050901e0e	Break out the entity blend calculations. This allows alias and sprite model lerping to share the code.	2012-01-04 18:30:47 +09:00
Bill Currie	836209e5c6	Enable lerping of alias models. Done in hardware }:>	2012-01-04 16:36:43 +09:00
Bill Currie	f0e88bbe85	Rip out the duplicate lerp code and merge it. While the vertex lerping needs to be duplicated in the current GL code, there's no need for the setup code to be duplicated. Also, I want it for GLSL.	2012-01-04 16:26:52 +09:00
Bill Currie	99381b8b8c	Rework the alias vertex shader and rendering code for lerping. Lerping isn't actually done yet (need to get both poses and blend), but this still renders correctly with blend forced to 0.0.	2012-01-04 14:35:34 +09:00
Bill Currie	add5440ad1	Upload the normals with the vertex data. Not all hardware can access a texture sampler from the vertex shader, and I don't want multiple paths this early in the game. Now, vertex normals are uploaded as shorts. Should be 14 bytes per vertex (was 10, could have been 8 if I had put the normal index with the vertex rather than st).	2012-01-04 09:42:00 +09:00
Bill Currie	fea7acd871	Enable vis calculation. One nice thing about this project: I now KNOW that efrags works the way I wanted it to: all those torches are now toggleable via r_novis :)	2012-01-03 23:20:01 +09:00
Bill Currie	d0a0440056	Make R_SplitEntityOnNode easier to read.	2012-01-03 23:19:21 +09:00
Bill Currie	454047ab92	Make r_novis 0 take effect immediately.	2012-01-03 23:17:49 +09:00
Bill Currie	0797183201	Merge R_MarkLeaves from gl, sw, and sw32. Other than novis, they're functionally identical. Now sw and sw32 have novis as well.	2012-01-03 21:09:13 +09:00
Bill Currie	091b714e4c	Implement dynamic lighting. This uses the same calculations as the software renderer. However, as the lightmap calculations are not done yet, if there is no dlight in the vicinity, there will be no light. demo1 is pretty cool to watch :)	2012-01-03 20:36:07 +09:00
Bill Currie	209c4cda8b	Scale the light level index correctly before colormap lookup. With this, lighting seems to be working. I'm not certain the normals are 100% correct, but I can see something happening on rotating models.	2012-01-03 19:57:47 +09:00
Bill Currie	e8f863c76f	Remove the hedgehogs from the garden. While the first frame was fine, any subsequent ones were not. I had forgotten that hdr->poseverts held the edited vertex count rather than hdr->mdl.numverts.	2012-01-03 18:11:39 +09:00
Bill Currie	d7bc437e2c	Fix the borked texture coordinates. Silly me, doing byte based pointer math on a non-byte pointer :P	2012-01-03 18:10:35 +09:00
Bill Currie	185fded944	Re-enable the matrix optimizations. Turns out my concatenations were correct.	2012-01-03 18:09:33 +09:00
Bill Currie	21c7b84379	Enable face culling and depth testing. I spent way too long trying to figure out why triangle order wasn't making any difference... :P	2012-01-03 18:08:01 +09:00
Bill Currie	1437cbec91	Make the face culling a little more sensible. GL Quake was weird, culling front faces. Partly understandable, since Quake's front order is clockwise and GL's default order is counter-clockwise. However, since the order can be specified, that should be done instead. Thus, specify the winding order as clockwise (for quake's data), set culling for back-face removal, and then mess with the winding direction in the mirror and fish-eye code.	2012-01-03 18:06:26 +09:00
Bill Currie	62e564c5cd	Send ALL of the model's verts to GL. Triangles have 3 vertices, not one :P	2012-01-03 11:47:40 +09:00
Bill Currie	ba04cf73d0	Add my test tetrahedrons.	2012-01-03 09:34:17 +09:00
Bill Currie	baab15279f	Correct the alias vertex data types. Vertex locations need to be unsigned byte rather than byte (GL is funy with that). s and t need to be at least short, and since the normal index is embedded in the st vector, it needs to be the same type. With this, my test tetrahedrons seem to be working.	2012-01-03 09:34:17 +09:00
Bill Currie	c378acab6b	Actually load up the mvp and normal matrices. Rather critical. I thought I'd done that :/	2012-01-03 09:34:17 +09:00
Jeff Teunissen	86edf54c40	Build and ignore cleanups GLSL renderer build was checking for BUILD_GL instead of BUILD_GLSL in a few places. Also, ignore the GLSL .fc and .vc files and the binaries.	2012-01-02 14:16:19 -05:00
Bill Currie	2a3151cecd	Hook in alias model drawing. Nothing is visible yet.	2012-01-02 20:28:40 +09:00
Bill Currie	72e3a8d507	Merge sw and sw32 alias frame selection. I'm leaving GL for later because lerping complicates things. I'll sort it out when I implement lerping in GLSL.	2012-01-02 17:47:22 +09:00
Bill Currie	1c480bf75e	Merge the alias skin selection code. We really don't need 4 copies of identical code when 1 will do :P	2012-01-02 15:57:43 +09:00
Bill Currie	540bccbc27	Load all the alias vertex data as bytes. I had forgotten I wanted to do it this way.	2012-01-02 13:41:12 +09:00
Bill Currie	a57835866a	Build the vertex normals texture.	2012-01-02 13:40:48 +09:00
Bill Currie	6b4a10819a	Add an RGB texture loader.	2012-01-02 13:15:19 +09:00
Bill Currie	7e5b3304fc	Create the colormap texture.	2012-01-02 11:19:23 +09:00
Bill Currie	fd67f3500b	Load the alias model shaders.	2012-01-02 11:18:34 +09:00
Bill Currie	df3d9fe4df	Correct the fullbright start color extraction. I don't know what despair and I were thinking, but we obviously didn't understand the colormap code at the time.	2012-01-02 10:53:57 +09:00
Bill Currie	7be08534be	Clearify the program dump info a little. Calling programs shaders was a little confusing when I use shader to refer to the sub-programs (vertex and fragment shaders). Also, print the program number as well.	2012-01-02 10:22:03 +09:00
Bill Currie	2ad5aa7aed	Unbind the array and element array buffers when done. Not doing so wreaked havoc on my 2d rendering (what's he doing here, and why's he messing with my redering? ;)	2012-01-02 10:08:56 +09:00
Bill Currie	d1419c30db	Make a start on alias model rendering. The vertex and fragment shaders are written, and R_InitAlias is stubbed, but that's it so far.	2012-01-01 23:58:12 +09:00
Bill Currie	f3884c659c	Finish alias skin loading and load vertex data into GL.	2012-01-01 23:55:27 +09:00
Bill Currie	f18cd65526	Implement the "cache" in Draw_CachePic.	2011-12-31 20:36:24 +09:00
Bill Currie	3eae8426e6	Implement in-game screenshots.	2011-12-31 17:24:20 +09:00
Bill Currie	d8dbfa9c24	Create WritePNGqfs so screenshots can be written as png.	2011-12-31 17:23:32 +09:00
Bill Currie	718595db45	Implement sprite rendering. Sprite interpolation seems to work, even :) (maybe)	2011-12-31 14:39:33 +09:00
Bill Currie	091e16f9d2	Bring in GL's R_RecursiveWorldNode as R_VisiteWorldNodes. No surface queuing is done, but entities get queued.	2011-12-31 14:33:20 +09:00
Bill Currie	ea2ae1436c	Fix some bugs in the new matrix functions/macros.	2011-12-31 13:20:31 +09:00
Bill Currie	55e53b796d	Make a start on getting sprites rendering. The plan is to do interpolated sprites based on a discussion I had with LordHavoc about them: blending between the two sprite frames. He didn't mention it, but it looks like blending between the sprite frames' verts is necessary too.	2011-12-30 21:11:59 +09:00
Bill Currie	16f84cd496	Hopefully get the 3d view and projection transforms setup.	2011-12-30 21:10:24 +09:00
Bill Currie	20d93466c7	Frag some magic numbers. More annoying than hipnotic's gremlins.	2011-12-30 21:07:35 +09:00
Bill Currie	35bf957d08	Add a 4x4 matrix type and some functions for it.	2011-12-30 20:11:53 +09:00
Bill Currie	edb05fdfce	Rename Vector3Scale and QuatCompScale. They are now VectorCompMult and QuatCompMult.	2011-12-30 20:04:55 +09:00
Bill Currie	bcdcd7b36d	Implement sprint glsl loading. That was... easy.	2011-12-30 09:36:57 +09:00
Bill Currie	a87a60a6fd	Flush the text buffer before drawing conback or menus. Ok, now really done until I notice something else (I forgot this one momentarily).	2011-12-29 18:23:09 +09:00
Bill Currie	047b7bcc32	Implement Draw_TileClear. With this, 2d seems to be finished. YAY.	2011-12-29 18:15:15 +09:00
Bill Currie	a1035aafe9	Implement Draw_TextBox.	2011-12-29 17:51:31 +09:00
Bill Currie	0e521a7779	Correctly detect going past the end of the pcx data. palette is just that, the palette, and often won't point to the end of the pcx data. Use the right end :).	2011-12-29 11:27:54 +09:00
Bill Currie	2b44a25c6b	Flush console text after each screen function. This on its own doesn't fix menus being overwritten with console text, but it's an important step.	2011-12-29 11:26:14 +09:00
Bill Currie	9fec4d5be0	Implement Draw_Fill. Almost there with 2d.	2011-12-29 11:25:27 +09:00
Bill Currie	9d0ed6b885	Fix the missing text. Silly case and paste error cleared out my text vertex array prematurely.	2011-12-29 08:47:32 +09:00
Bill Currie	bece72e746	Use a quick hack to get colored crosshairs working.	2011-12-28 21:45:20 +09:00
Bill Currie	e69a583f1b	Work around a bug in mesa. Since I'm not specifying the api when creating my context, mesa is giving me GL2. This is fair enough, but in GL2, vertex attribute 0 is the vertex position. This too, is fair enough. The problem is, mesa is assigning 0 to my vcolor attribute and thus I can't set it. The work around is simply to swap the declaration order of vcolor and vertex (this really shouldn't work eiter, I suspect).	2011-12-28 20:43:56 +09:00
Bill Currie	6a44978a0f	Fix reading of GL_CURRENT_VERTEX_ATTRIB. Turns out it returns a vec4. oops.	2011-12-28 20:41:26 +09:00
Bill Currie	8ee13ef8c2	Do some clipping in the draw routines. After fixing Maraakate's crash, I thought it would be a good idea to put the fixes into QF, too.	2011-12-28 19:20:18 +09:00
Bill Currie	4e7af5c3e0	Add a function to dump the info for all attribute arrays.	2011-12-28 14:27:59 +09:00
Bill Currie	411ab8f359	Be noisy when resolving uniforms and attributes.	2011-12-28 12:58:26 +09:00
Bill Currie	be9530afb6	Dump a lot of info about shader programs. New developer bit: SYS_GLSL (2048).	2011-12-28 12:40:28 +09:00
Bill Currie	b657905c83	Bring in Despair's gl error checking from the gl renderer.	2011-12-28 09:05:36 +09:00
Bill Currie	151cc05882	Add support for vertex colors. As I need to control the alpha, they're sent as rgba rather than quake palette indices. Text works well. All other 2d stuff does not :(.	2011-12-28 09:04:26 +09:00
Bill Currie	b943b6d6e8	Implement crosshairs, mostly. Colored crosshairs aren't supported yet (next).	2011-12-27 17:59:58 +09:00
Bill Currie	db8573b774	Make the cross-hair data sharable between renderers.	2011-12-26 21:43:15 +09:00
Bill Currie	705d07fa39	Implement most of the 2d rendering functions. textbox, crosshair, tileclear, fill and fadescreen are the remaining functions. There's a problem with 2d icons being drawn over the text (instead of under), but I'll leave that for later.	2011-12-26 20:33:40 +09:00
Bill Currie	e2a8de33cc	First real texture support function for glsl.	2011-12-26 18:34:51 +09:00
Bill Currie	42034acc03	Organize the text program data. Also, rename the charmap uniform in quake2d.frag as it's more generic than that.	2011-12-26 18:00:55 +09:00
Bill Currie	2ccfbb0c1c	Move the shader program code into vid_common_glsl. Much more useful in the long run.	2011-12-26 17:17:29 +09:00
Bill Currie	5bed38dcd9	Rename quaketxt.frag to quake2d.frag. It's actually fairly generic for 2d rendering (no lighting, palette lookup)	2011-12-26 17:11:31 +09:00
Bill Currie	f78db6c570	Clean up the generated shader files.	2011-12-26 16:39:02 +09:00
Bill Currie	d743c6c55f	Make a clean break heading for GLES compatibility. Add GLSL directory to QF and use it for all gsls based code (instead of GL). defines.h, types.h and funcs.h are derived from gl2.h from khronos. Text drawing now uses triangles instead of quads.	2011-12-26 16:08:55 +09:00
Bill Currie	e6c6de3a2a	Fix the palette uploading. Ooooops :P	2011-12-26 10:41:16 +09:00
Bill Currie	7bd5ab882c	Get text rendering working. It comes out as a funky green (that's not in the quake palette!!!), but it's mostly readable.	2011-12-26 10:16:16 +09:00
Bill Currie	9f5eacd1fb	Try to get text rendering. Still a black screen :(	2011-12-26 08:12:05 +09:00
Bill Currie	c161a91d4a	Split out and partially implement the screen code.	2011-12-26 08:09:47 +09:00
Bill Currie	1268830082	Split out the particle code.	2011-12-26 08:02:18 +09:00
Bill Currie	7d653f3676	Start work on outputting text. The shaders now compile. No linking is done yet. Char quads are generated, but not sent to the card.	2011-12-25 19:42:39 +09:00
Bill Currie	91afdcf064	Don't call init_box when not doing a box trace. I took the opportunity to pass qf through callgrind. init_box was surprisingly expensive, especially considering its results were never used.	2011-12-25 17:11:48 +09:00
Bill Currie	55a0ed49cd	Build qw-client-glslx too. I was asked about timedemo overkill (bigass1 currently gets 40kfps, haha), so I had to add qw-client-glslx to the build.	2011-12-25 16:41:14 +09:00
Bill Currie	9df7370bcd	Create some shaders for quake text. Still nothing drawn, but this gets my shader scripts into C without me having to look at ugly strings.	2011-12-25 15:53:12 +09:00
Bill Currie	b7c90fa02d	Load the quake palete as a texture. 256x1 rgba.	2011-12-25 13:53:52 +09:00
Bill Currie	99c490ce52	Get glsl running as a null renderer. This means that nq-glslx can get through demo1, demo2, demo3 and bigass1 without crashing. However, nothing is rendered, so unless you like black, it's not very interesting.	2011-12-25 13:02:26 +09:00
Bill Currie	2894689f71	Clean up mod_lightmap_bytes. Just how many definitions do we need?	2011-12-25 13:02:26 +09:00
Bill Currie	dcf2b14188	Implement alias model skin loading for glsl.	2011-12-25 13:02:26 +09:00
Bill Currie	e62eb23f67	And do the real merge. That drastically simplifies the processes of alias model loading for glsl :)	2011-12-25 11:04:03 +09:00
Bill Currie	c0d37ddc1e	Pseudo merge gl and sw Mod_LoadAliasGroup. Interestingly, this didn't break gl alias model renderering (but then, it does weird things to the data anyway).	2011-12-25 10:53:53 +09:00
Bill Currie	1f8db5fe3a	Pseudo merge gl and sw Mod_LoadAliasFrame.	2011-12-25 10:34:29 +09:00
Bill Currie	cc5140e3a1	Move min/max/bound and field_offset into better locations. min/max bound into mathlib.h (they /are/ math functions, after all) and field_offset into qtypes.h.	2011-12-24 10:04:33 +09:00
Bill Currie	59ef1eae9d	Split out the floodfile code into its own file.	2011-12-23 19:01:31 +09:00
Bill Currie	6fe9557dae	Put in the final pieces so nq-glslx can link. Everything is still stubs. Trying to run nq-glslx results in a segfault :)	2011-12-23 12:52:55 +09:00
Bill Currie	53d89bf85a	Clean up the mess around D_FlushCaches. Create an R_ClearState and call that from the clients. It calls any necessary functions itself.	2011-12-23 12:51:47 +09:00
Bill Currie	33c5320c0e	Create stubs for most of the required render functions. nq-glslx almost links. Just some suspicious references in host.c I want to check before doing anything more.	2011-12-23 12:19:50 +09:00
Bill Currie	497461b4c2	Make a start on making a pure GLSL renderer. For now, only nq-glslx will be built, but as there is no actual code, it doesn't link. However, this gets the glsl stuff into the build system.	2011-12-23 12:19:13 +09:00
Bill Currie	858d95de58	Add a bunch more keys to the X11 clients. Now, QF does something reasonable for every key on my keyboar for which X gives us a keycode.	2011-12-19 16:37:48 +09:00
Bill Currie	87390f53b0	Z_Realloc() should zero-fill the expandded part of the mem Patch from Ozkan Sezer (sezero). Thank you.	2011-12-19 09:45:46 +09:00
Bill Currie	52d9269867	Merge brush model with world model rendering. With this, non-mtex global fog now works properly :).	2011-12-18 08:09:55 +09:00
Bill Currie	a8e354536a	Implement the instance surface allocation/freeing. Not actually used yet, so it's harmless at this stage.	2011-12-17 19:42:19 +09:00
Bill Currie	87b78e5533	Move the surface chain links out of the surfaces. The links are now in "instance surfaces". For non-instanced models (world, doors, plats etc (ie, world and its sub-models)), there will be one instance surface per model surface. However, for instanced models (ammo boxes etc), there will be many, dynamically allocated (not yet implemented). This commit gets the static instance surfaces working.	2011-12-17 19:14:14 +09:00
Bill Currie	9f0bdf7794	Add some comments.	2011-12-17 09:39:57 +09:00
Bill Currie	933120d44f	Fake vertex arrays for text and particles. Getting gl_vaelements_max -1 to work produced a rather nasty surprise :P	2011-12-16 20:09:05 +09:00
Bill Currie	5cd1f6f5cf	Fix a GL version check snafu. Thanks to MH (on inside3d.com) for pointing this out to me.	2011-12-16 09:43:22 +09:00
Bill Currie	e67690a1a9	Restore the missing lightmaps in non-mtex mode. I forgot to blend in the lightmaps in the fogless non-mtex path.	2011-12-16 09:21:39 +09:00
Bill Currie	b2aa5ce554	Register the textures of other brush models;	2011-12-15 17:09:02 +09:00
Bill Currie	962451e2fe	Create a list of texture chains. This moves the texture chains out of the world model and into a separate list, allowing other brush models to registter their textures.	2011-12-15 17:09:02 +09:00
Bill Currie	d6a668d517	Split out chain_surface() from visit_node().	2011-12-15 17:09:02 +09:00
Bill Currie	3eb859a88f	Move the entity transform setup into the clients. This has several benifits: o The silly issue with alias model pitches being backwards is kept out of the renderer (it's a quakec thing: entites do their pitch backwards, but originally, only alias models were rotated. Hipnotic did brush entity rotations in the correct direction). o Angle to frame vector conversions are done only when the entity's angles vector changes, rather than every frame. This avoids a lot of unnecessary trig function calls. o Once transformed, an entity's frame vectors are always available. However, the vectors are left handed rather than right handed (ie, forward/left/up instead of forward/right/up): just a matter of watching the sign. This avoids even more trig calls (flag models in qw). o This paves the way for merging brush entity surface rendering with the world model surface rendering (the actual goal of this patch). o This also paves the way for using quaternions to represent entity orientation, as that would be a protocol change.	2011-12-15 17:09:01 +09:00
Bill Currie	f6ebb78140	More GL_Init_Common() cleanup. Move the call to GL_Common_Init_Cvars() out of the block of check calls.	2011-12-15 17:09:01 +09:00
Bill Currie	51aaee5c3b	Put that OpenGL error message to rest. The error was quite valid: setting GL_TEXTURE_MAX_ANISOTROPY_EXT to 0 is incorrect. The problem was caused by the call to glTexParameterf being before the gl_anisotropy cvar was initialized. Thus, move all of the setup code in GL_Init_Common() to after all the checks and, more importantly, after the call to GL_Common_Init_Cvars().	2011-12-15 17:09:01 +09:00
Bill Currie	da552e33e7	Remove execinfo checks. It seems we no longer need it (if we ever really did).	2011-12-13 21:25:41 +09:00
Bill Currie	4b515a961b	Back out the fitzquake lerp changes. That's not the direction I wish to take the renderer.	2011-12-13 17:01:15 +09:00
Bill Currie	b05be59ea0	Fix alias models in non-mtex fog. It turns out that due to the way we do fullbrights, nothing special needs to be done to get the fullbright texture blended with the model even when fog is enabled.	2011-12-12 17:08:22 +09:00
Bill Currie	8e531a58c2	Get global fog working for multi-pass rendering. For the world textures, anyway. Entity multi-pass rendering still needs to be verified.	2011-12-12 17:08:22 +09:00
Bill Currie	206199652a	Fix a stray CFLAGS. Should be AM_CFLAGS.	2011-12-10 20:45:33 +09:00
Bill Currie	c3d41326b3	Do key dest changing properly. key_demo wasn't so well thought out. This seems to be much better (and nq is known to be working nicely).	2011-12-10 16:14:25 +09:00
Bill Currie	16c8b2a18d	Use the new demo imt. There are some problems with menus and the console messing up the key_dest state (they assume console/menu or game, nothing else), but otherwise things seem to work.	2011-12-10 15:18:50 +09:00
Bill Currie	3ae17e4d37	Fix a silly omission. Must not check for IMT_MOD bindings when using IMT_CONSOLE etc.	2011-12-10 14:49:56 +09:00
Bill Currie	81a16c925b	Add IMT_DEMO for demo playback bindings. This will allow special key bindings for use during demo playback without interfering with normal keys.	2011-12-10 14:21:12 +09:00
Bill Currie	14d8e8669f	Rework the legacy bind/unbind commands. in_bind_imt is now gone. I guess mercury was right in that it was a poor design. However, it was (and still is necessary) to support "bind" and "unbind". Now, instead, they work only with the IMT_MOD table. IMT_MOD sits below IMT_0 in the imt hierarchy. If the key is not bound in IMT_0+, then IMT_MOD will be checked. This way, "bind" and "unbind" can never mess with a user's more sophisticated binding setup.	2011-12-10 13:56:02 +09:00
Bill Currie	49451eea80	Use the new menu/console bingings. Now, the console toggle will always work (so long as the console is toggleable in the first place).	2011-12-10 13:24:32 +09:00
Bill Currie	d9d56760e1	Add cvars to control the keys for menus and console. The backquote is not always usable for toggling the console, and the new bind system doesn't automatically bind a key to both game and console imts (by design). Thus create a cvar that allows the "always works" console toggle to be specified in eg $fs_globalcfg. While I'm at it, do one for the menus, too.	2011-12-10 13:24:32 +09:00
Jeff Teunissen	361255cf31	Ruamoko: New math constants, some new math functions Also, switch all of the math builtins functions we use from Rua to the ones that accept and return floats, avoiding conversions to/from double.	2011-12-09 22:36:41 -05:00
Bill Currie	2edac1a438	Nuke a sprintf.	2011-12-08 22:16:59 +09:00
Bill Currie	1c82956dd7	net_udp.c FIONREAD fix from Ozkan Sezer. net_udp.c: Fixed FIONREAD ioctl to take an int* argument instead of an unsigned long*.	2011-12-08 21:50:55 +09:00
Bill Currie	8aa5a8139c	Split out the portal sanity tests. With this, the portal code can be tested separately, including the freeing of the portal information.	2011-12-08 14:59:35 +09:00
Bill Currie	f9877ce0e0	Add a function to free a hull's portal information.	2011-12-08 14:58:08 +09:00
Bill Currie	d3cf5c4b75	Beg for mmap access. If the default sound device does not support mmap access, retry with plughw. However, assume the user knows best and do not retry if snd_device has been set to anything, including "default". QF alsa support now works out of the box with pulseaudio.	2011-12-08 11:32:33 +09:00
Bill Currie	45288a1a7f	Fix the ghastly sound quality. Due to quake's original sound engine using a push model, the actual place to which the sound data should be written is not necessarily where the "hardware" dma cursor is, but rather where the last write finished off. Thus, the correct output location is indicated by snd_paintedtime rather than snd_shm->framepos.	2011-12-08 11:02:19 +09:00
Bill Currie	fceed07d0b	Tidy up my diagrams.	2011-12-08 08:45:53 +09:00
Bill Currie	9f32004599	Add a fixme. I've had enough of this for the moment, but I'm pretty sure the test needs some more consideration, and I'll probably forget about it if I don't mark it.	2011-12-07 17:27:13 +09:00
Bill Currie	2a27db146e	Use a bit of epsilon in trace_contents(). All tests pass again.	2011-12-07 15:35:19 +09:00
Bill Currie	66dffef936	Get trace_to_leaf working a little better. I think the recursion decision needs a little more work, but this gets the current tests working (though there's still a failure due to fp math).	2011-12-07 15:31:33 +09:00
Bill Currie	ccbc69a7f5	Carve out some more cave and add some more tests. One of them even breaks the code :)	2011-12-07 13:31:21 +09:00
Bill Currie	4ed8b69e24	Check the cross product length before testing its direction. This fixes the bogus portal crossings.	2011-12-07 12:20:04 +09:00
Bill Currie	5af88d33fe	Trace to the current portal rather than the portal's plane.	2011-12-07 12:17:51 +09:00
Bill Currie	9d2914474c	Fix the edge vectors when bounding the portal points.	2011-12-07 12:16:58 +09:00
Bill Currie	6a4021517b	Move the box face info into trace_state and init only once. Then clean up the mess of excess function paramenters.	2011-12-07 10:54:37 +09:00
Bill Currie	fc14826cd6	Reorganize the code a little.	2011-12-07 10:42:39 +09:00
Bill Currie	4f13d19b7e	Optimize edges_intersect(). I found wolfram's line-line intersection page and noticed their equation for the time of intersection was rather different to mine. After analyzing the differences, it turns out they produce exactly the same results (when the lines are coplanar), but their method allows me to eliminate one dot product (4->3). Not only that, but it turns out that their method works equally well for skew lines (ie, non-coplanar). mine: CxA.CxA ------- CxA.AxB theirs: CxA.AxB ------- AxB.AxB	2011-12-07 10:35:58 +09:00
Bill Currie	ff693a956a	Avoid missed portals in trace_to_leaf().	2011-12-06 22:09:40 +09:00
Bill Currie	8c840a7003	Sanitize trace_hits_plane(). While unit normals aren't needed, they were too big for sane math. Now epsilon can be used for the distance tests. One of the two new tests passes now :).	2011-12-06 22:06:25 +09:00
Bill Currie	2b65f81b72	Use a saner "infinity". 8e6 is just too big for reasonable floating point. This fixes the bogus portals.	2011-12-06 20:50:09 +09:00
Bill Currie	632817fed5	Fail properly when the portals are bogus.	2011-12-06 20:48:31 +09:00
Bill Currie	f496f4d260	Whee, more tests that break things :)	2011-12-06 20:47:57 +09:00
Bill Currie	8fe703d747	Trace to adjoining leafs when necessary. When the trace stradles a plane in the current leaf, check the other side of the portal, too, as it is possible that leaf will restrict the movement of the trace. All current tests pass! However, I can think of some situations (and I already have a solution) where things will fail, but that's next.	2011-12-06 17:27:05 +09:00
Bill Currie	4c17ca9583	Break out trace_hits_portal() from trace_enters_leaf().	2011-12-06 08:46:04 +09:00
Bill Currie	9a9079a2b3	Correct the start-solid in a corner test. It turns out that the box trace CAN get out of the solid from that location (though a similar point trace can not). This is because of my decision to allow non-points to touch a plane from either side without crossing the plane, whereas a point touching a plane is always considered to be on the front side of the plane as there is no further information to disambiguate on which side of the plane the point is.	2011-12-05 22:11:58 +09:00
Bill Currie	4419d4c4ad	Move the trace into the leaf before testing the contents. The trace is moved as far into the leaf as possible without leaving the other side of the leaf. This ensures that trace_contents is started from a good location. There is currently a problem with traces that stradle a plane getting, but this has cleared up all the current contents related tests.	2011-12-05 22:11:58 +09:00
Bill Currie	c588d28b96	Clear contents flags before calling trace_contents.	2011-12-05 22:11:58 +09:00
Bill Currie	8307d9f233	Rename check_in_leaf to trace_enters_leaf.	2011-12-05 22:11:58 +09:00
Bill Currie	3bd029d599	Make the contents flags clear. I got tired of not being able to remember which flag was which in the output.	2011-12-05 22:11:47 +09:00
Bill Currie	8e512a087c	More failing contents tests. However, I have a plan :)	2011-12-05 09:03:04 +09:00
Bill Currie	b4a497baab	Correctly restore the saved start point. This fixes the point test failures.	2011-12-04 21:12:12 +09:00
Bill Currie	7da6df9dfb	Use the "real" contents of the trace's location when visiting a leaf. When visiting a leaf in box mode, use trace_contents() to get the highest priority contents of any leafs touched by the box in the current location. I'm now down to one failing test case, and it's an "allsolid" issue that might be an incorrect assumption in my test case.	2011-12-04 19:14:35 +09:00
Bill Currie	053d801e92	Break out the leaf visit code into its own funciton.	2011-12-04 18:52:17 +09:00
Bill Currie	4e76aa3025	Don't split on a plane parallel to the motion. This seems to improve the start/all solid cases a little, and it should speed things up a little by avoiding unnecessary polygon tests.	2011-12-04 12:46:22 +09:00
Bill Currie	ed8e09608a	Fix the negative fractions coming from edge_portal_dist(). I have a better fix in the works, but I wanted edge_portal_dist() to be correct.	2011-12-04 12:11:27 +09:00
Bill Currie	e5903a60ff	Put the mistaken test case back in.	2011-12-04 11:00:38 +09:00
Bill Currie	eb5d2720e4	Avoid a segfault when there's no split plane.	2011-12-04 10:55:46 +09:00
Bill Currie	cdfc922bce	Fix a silly test case error.	2011-12-04 10:47:52 +09:00
Bill Currie	487a6b20ab	Test collisions with a ridge smaller than the box. Whee, found a failing test case :)	2011-12-04 09:02:12 +09:00
Bill Currie	55eb88b52c	Create some tests for MOD_HullContents.	2011-12-03 22:18:43 +09:00
Bill Currie	581972c905	More file splitting for code reuse.	2011-12-03 21:13:01 +09:00
Bill Currie	dadfb78992	Split out the hull data so it can be used in other tests.	2011-12-03 20:23:42 +09:00
Bill Currie	9ad298a716	Check whether the portal and box intersect. Now on to creating tests for MOD_HullContents :)	2011-12-03 19:59:12 +09:00
Bill Currie	d9a641c600	Avoid a segfault when the hull hasn't been portalized. Serves me right for forgetting to test the main engine :P	2011-12-03 09:06:57 +09:00
Bill Currie	27642a080a	Avoid infinite recursion.	2011-12-01 12:57:06 +09:00
Bill Currie	f9d56f2941	Add MOD_HullContents(). If trace is null or point type, or the hull doesn't have portals, or the first node is a leaf, MOD_HullContents operates in point mode (exactly the same way as SV_HullPointContents()). However, in box mode, all leafs touched by the trace are checked for their contents. The contents field of trace (a bit field) will indicate the contents type of all touched leafs. The returned contents value indicates the most important contents: solid > lava > slime > water > empty The one's complement value of the contents type is the bit number of the contents bit field. I'm not sure how useful this will be as getting the amount of overlap is currently not supported.	2011-12-01 12:26:33 +09:00
Bill Currie	7ee31dd475	Allow the trace start to be in multiple leafs. This fixes a couple of in-solid tests, but something better is needed.	2011-11-28 20:56:21 +09:00
Bill Currie	13d37f4838	Add a bunch of in-solid tests. Tests where the box is only partially in a solid tend to fail (particularly when the solid is on the back side of the split plane).	2011-11-28 20:56:21 +09:00
Bill Currie	50b08c98fa	Add some snug-fit tests and fix the uncovered bugs. The tests involve the box fitting into a hole with zero slop (this would be impossible with point clipping).	2011-11-28 20:56:21 +09:00
Bill Currie	985667ecba	Fix plane touching box backsideness. Because a box has size, even when touching a plane, the side on which the box is can be determined (unlike a point).	2011-11-28 20:56:21 +09:00
Bill Currie	869cd19260	Box traces can now graze a corner.	2011-11-28 20:56:21 +09:00
Bill Currie	45d55d7e9a	Test the simple wedge.	2011-11-28 20:56:21 +09:00
Bill Currie	2c9b07b257	Scale the box edge vectors. Now they represent the lengths of the edges as expected by the edge/polygon code.	2011-11-28 20:56:20 +09:00
Bill Currie	60dbc0e342	Fix the last few bugs breaking the distance code. The code itself seems to work now. There are still some problems: the box faces are using unit vectors for the edges, or I should go back to unit vectors for the portal edges; starting in a solid corner won't always work; etc. However, that's just mopping up: the main algorithm seems to be working.	2011-11-28 20:56:20 +09:00
Bill Currie	996859c367	Correct the projection code. That needed to be the intersection of two coplanar lines.	2011-11-28 20:56:20 +09:00
Bill Currie	ab2ec644d6	Clip the portals when running the test cases. When the portals are too big, floats break down and break the tests. This might not be much of an issue in real maps, but my tests use "infinite" planes.	2011-11-28 20:56:20 +09:00
Bill Currie	2abff68089	Fix some more silly bugs. The target test now works, but some others have broken due to getting negative fractions.	2011-11-28 20:56:20 +09:00
Bill Currie	a1da8ecdd0	Fix some silly errors that broke most of the box tests. Uninitialized variables and crossed signs. Oops :/	2011-11-28 20:56:20 +09:00
Bill Currie	8fc99566ab	Add code to clip the motion of the box to the leaf's portals. Unfortunately, something is broken (all box tests fail due to 0 fraction).	2011-11-28 20:56:20 +09:00
Bill Currie	5ee552ea5b	Don't normalize the portal edge vectors. This simplifies the collision handling code.	2011-11-28 20:56:20 +09:00
Bill Currie	174f381125	Add some more tests for the ramp. These tests pass, but show the basic polygon testing working (just not the collision handling and thus fraction determination).	2011-11-28 20:56:20 +09:00
Bill Currie	750b5ba0ed	Be a little more lenient with float comparisons. Unfortunately, Pythagorus and binary don't play well together, so rounding errors are inevetible when testing with a slope. However, 1e-6 seems to be a good epsilon (printf's %g hides it nicely :).	2011-11-28 20:56:20 +09:00
Bill Currie	73b93ffd74	Clean up the in_leaf test line.	2011-11-28 20:54:35 +09:00
Bill Currie	e3d8394b7a	Use the split_plane for the in-leaf test. This seems to work better (all previously working tests pass again), but the target test is still broken.	2011-11-28 20:54:35 +09:00
Bill Currie	7b59eaf0cd	Use the correct vector for the plane distance. Oops :)	2011-11-28 20:54:35 +09:00
Bill Currie	cde0bbb807	For now, don't use box clipping for point traces. Until I figure out how I want to handle zero sized boxes, don't test them.	2011-11-28 20:54:35 +09:00
Bill Currie	fd5aee1d5e	Use the portals to check leaf validity. If the trace hits a portal on the plane that brought us to the leaf, then we actually are in the leaf (otherwise, we shouldn't be here and thus should ignore the leaf). At least, that's my thinking. Many point tests fail (but they're really using box clipping with a zero sized box) and two box tests fail.	2011-11-28 20:54:35 +09:00
Bill Currie	297275e3de	Create edge information for the portals.	2011-11-28 20:54:35 +09:00
Bill Currie	662c04dfdc	Add a function to obtain the unit vectors of a winding's edges.	2011-11-28 20:54:35 +09:00
Bill Currie	e41da2f579	Store the start fraction and position in the right stack slot. Oops. Yay, valgrind.	2011-11-28 20:54:35 +09:00
Bill Currie	d61cb25a44	Add code to rebuild the bsp brushes. Names and locations of declarations are still up in the air, but things seem to be working assuming my test code is correct.	2011-11-28 20:54:35 +09:00
Bill Currie	853bf13d9e	Move the winding code into libQFmodels.	2011-11-28 20:54:35 +09:00
Bill Currie	91e65b6c80	Rename mplane_t to plane_t and clean up the mess. I got rather tired of there being multiple definitions of mostly compatible plane types (and I need a common type anyway). dplane_t still exists for now because I want to be careful when messing with the actual bsp format.	2011-11-28 20:54:34 +09:00
Bill Currie	2f23cfa4d0	Add a new (failing) test case. This one demonstrates the need for more information in the bsp tree (surface polygons). When the box collides with a corner where one side is flat and the other angled, but there's a partition plane cutting the two, the box can instead collide with the angled side before it hits the corner.	2011-11-28 20:54:34 +09:00
Bill Currie	7a1faee460	Bail out when the trace advances past the nearest collision.	2011-11-28 20:54:34 +09:00
Bill Currie	a943cdf2c4	Handle dual collisions. When the trace collides with something on both sides of a plane, the nearer collision is required. The code now correctly checks both sides and keeps the nearer collision.	2011-11-28 20:54:34 +09:00
Bill Currie	0cf5dec5bb	Fix the covered step tests. However, there is still a problem with moves where the box is always cut by the plane: both sides need to be tested (done), but when the first side checked allows longer motion than the second, but still collides, only the first side is checked. The shorter motion is required.	2011-11-28 20:54:34 +09:00
Bill Currie	8cc320b7ef	Move the start point to the near side of the crossed plane. I'm not sure the end point needs to be moved at all, but I'll leave it alone for now. I have a couple of failing test cases that seem to be caused by not handling moves where the box is always cut by the plane.	2011-11-28 20:54:34 +09:00
Bill Currie	fa6390a46a	Correct the sign for the shift in frac. However, this is not entirely correct as the new start point when testing the other side of the plane also needs to be calculated.	2011-11-28 20:54:34 +09:00
Bill Currie	b82d9f5894	Another test, another bug. Fix an incorrect test using offset (forgot to negate).	2011-11-28 20:54:34 +09:00
Bill Currie	9984a2e87a	Fix some missing usages of offset. This fixes my one failing box clip test. Now I need to find more broken cases. At least now, they should be real tests.	2011-11-28 20:54:33 +09:00
Bill Currie	9d63298032	Tweak a fixme comment. The code is potentially slow, especially on big maps, but I haven't noticed any issues yet.	2011-11-28 20:54:33 +09:00
Bill Currie	03abb3b27d	Add support for ellipsoids. Not that boxes work yet, but the fix is the same.	2011-11-28 20:54:33 +09:00
Bill Currie	b4da9241f6	Make a fresh start on box clipping. I even have a failing test to fix :)	2011-11-28 20:54:33 +09:00
Bill Currie	6d2b92125a	Make nva a little more memory efficient.	2011-11-15 13:47:05 +09:00
Bill Currie	940476dce1	Do some renaming to make things a little clearer.	2011-10-02 15:07:36 +09:00
Bill Currie	a356ce6572	Assume the trace will be allsolid. Rather than setting allsolid when the trace fails to leave solid space, clear it when the trace enters non-solid space. This is necessary because the trace might visit only one node and thus the failure to leave solid space will not be detected. This fixes the problem with hipnotic's bobbing water.	2011-09-27 17:14:42 +09:00
Bill Currie	9c6693d567	Correct hull3 and its tests. I'd gotten the solid/empty parts backwards.	2011-09-27 17:11:57 +09:00
Bill Currie	3e74aa5303	Add trace-qf-bad.c to Makefile.am and testclip.c.	2011-09-27 17:09:04 +09:00
Bill Currie	e23ee07b6f	Ensure id's trace is properly initialized.	2011-09-27 15:38:28 +09:00
Bill Currie	32ff639bf3	Add an old qf version of trace.c This version is broken (it's the one "fixed" by commit `981622f9`), but it does behave correctly for hipnotic's bobbing water. The question is, why?	2011-09-27 13:00:19 +09:00
Bill Currie	9daa0b7bde	Rename the empty and solid flags, and use them correctly. seen_empty and seen_solid much better reflect their meanings, and also use them correctly (eg, visiting an empty node does not clear seen_solid). Hipnotic's bobbing water is still broken, though.	2011-09-27 12:33:50 +09:00
Bill Currie	a7482570b6	Document the geometry in the tests.	2011-09-27 12:30:21 +09:00
Bill Currie	aa6b7ef7e8	Add some water based tests. Unfortunatly, they haven't uncovered the bug.	2011-09-26 21:02:54 +09:00
Bill Currie	800e8cb3da	Make the id trace code more readily usable in the engine.	2011-09-26 19:56:00 +09:00
Bill Currie	ae0dc6f06b	Disable the "shouldn't happen" code. It causes the tests to fail, and doesn't affect the problem I'm currently facing.	2011-09-26 19:56:00 +09:00
Bill Currie	baf9b7c181	Make the test nodes a little easier to read.	2011-09-26 19:56:00 +09:00
Bill Currie	683adf1850	Print the name and texture number for model skins. Use SYS_GLT (1024) for gl texture debugging.	2011-09-26 13:03:53 +09:00
Bill Currie	d9ab3a1f54	Move the config file/command line parsing into qargs.c I don't like the COM prefix, but it will do for now.	2011-09-11 14:57:05 +09:00
Bill Currie	a71acc9ae5	Move the essential init code into Sys_Init().	2011-09-11 14:56:47 +09:00
Bill Currie	6fb73b5ae8	Nuke some mystery code. I have no idea why I did that, but it crept in with the var substitution fix, so I guess it might have been an attempt to fix a bug, but it looks like it was broken anyway.	2011-09-11 13:10:14 +09:00
Bill Currie	e5add8b4f5	Use dstring_freeze() to cleanup some code.	2011-09-11 13:09:24 +09:00
Bill Currie	8bab548d16	Make the hud type configurable via dirconf. Currently only "id", "hipnotic" and "rogue" are supported (anything else is treated as "id"). Has no effect in quakeworld (good thing too: changing gamedirs is a little broken).	2011-09-11 08:13:26 +09:00
Bill Currie	8e30d3098e	Fix asm ilnking in mingw. It seems that recent binutils/libtool doesn't like exporting symbols that don't begin with a _.	2011-09-10 17:49:14 +09:00
Bill Currie	da7ddc35c0	Fix the segaults when trying to use snd_disk. It's output is still bogus (and it writes to the current directory!), but at least the plugin can be used without any nasty issues.	2011-09-10 12:07:18 +09:00
Bill Currie	bfd1680c15	Fix a 32/64 bit portability issue.	2011-09-09 19:56:16 +09:00
Bill Currie	999912e49a	I thought I'd tested those changes :(	2011-09-09 19:55:54 +09:00
Bill Currie	a426dacc8a	Add a missing \n	2011-09-09 17:43:48 +09:00
Bill Currie	d043e2bf17	Rewrite QFS_FileBase(). It now uses QFS_SkipPath() and QFS_FileExtention() to find the file's base name.	2011-09-09 17:39:00 +09:00
Bill Currie	d92488ce9f	Rewrite QFS_DefaultExtension() and QFS_SetExtension(). They now use QFS_FileExtension() to find the correct place for the extension.	2011-09-09 17:37:45 +09:00
Bill Currie	225f1cd06c	Rewrite QFS_StripExtension() to use QFS_FileExtension().	2011-09-09 17:35:12 +09:00
Bill Currie	96ef0ffaea	Rewrite QFS_FileExtension() to be more correct.	2011-09-09 17:33:29 +09:00
Bill Currie	08fa6be9f4	Fix a potential buffer underflow.	2011-09-09 17:30:07 +09:00
Bill Currie	20d056e6c5	Fix my broken warnings fixes. That's what you get for blinding working on code you don't grok :P	2011-09-08 21:05:33 +09:00
Bill Currie	881d4babce	Fix some undefined symbols in snd_alsa.c. Serves me right for testing with only my debug build :P	2011-09-08 18:10:09 +09:00
Bill Currie	6da725d510	Simplify and slightly improve Cmd_StuffCmds(). Make use of dstring to manage the built command mini-script. Ensure + and - that do not come after whitespace do not start a new command.	2011-09-08 12:37:52 +09:00
Bill Currie	e8e8dad535	Fix a potential crash with the cvar reset command.	2011-09-07 21:07:52 +09:00
Bill Currie	2ae33a753a	Support non-interleaved mmap sound. Unfortuanately, I can't test this properly as I don't have any such hardware, but as the code is mosly an edited copy of the interleaved code, any errors should be easy to fix.	2011-09-07 17:00:57 +09:00
Bill Currie	a8ea3aaad9	Allow dma sound targets to specify an xfer function.	2011-09-07 17:00:18 +09:00
Bill Currie	9ffa1f410a	Detect the silent death of the jack client thread. When jackd gets an unhandled xrun, it stops all processing but neglects to tell the client about it. Thus, add a bit of a watchdog function to s_update() and assume the client thread is dead if there's no sign of life after one second. No more hanging on exit.	2011-09-07 15:16:27 +09:00
Bill Currie	581539f7af	Make debug printing a little smarter. When a field or global name is used, the printed value reflects the type of that variable.	2011-09-07 09:41:06 +09:00
Bill Currie	91f6b7f555	Better use of Sys_Printf.	2011-09-07 09:41:06 +09:00
Bill Currie	39190c5e2c	Remove an unnecessary include. Don't need that :P	2011-09-07 09:41:05 +09:00
Bill Currie	deddb5cb6a	Partially document the message api.	2011-09-04 09:58:12 +09:00
Bill Currie	9afb691dd9	Change MSG_ReadShort to return an unsigned short. Avoiding the sign extension by default seems to be more useful.	2011-09-04 09:58:12 +09:00
Bill Currie	12e238f806	Add a function to convert quake angles to a quaternion. The test works by comparing the result of AngleVectors with forward, right, and up vectors rotated by the quaternion resulting from AngleQuat.	2011-09-04 09:58:12 +09:00
Bill Currie	1c47f9e16d	Kill some magic numbers.	2011-09-04 09:58:12 +09:00
Bill Currie	fe3cdbcf5a	fix a snafu in quattomat	2011-09-04 09:58:12 +09:00
Bill Currie	eb205d73fd	Add a function to convert a quaternion to a rotation matrix.	2011-09-04 09:58:12 +09:00
Bill Currie	5c9ab2832f	Fix win32 cross-building. No idea if the code actually works :(	2011-09-04 09:48:16 +09:00
Bill Currie	e50f0e18ba	Make netmain use netadr_t, same as netchan. Having sockaddr and friends in a header file was bad news for portability (especially windows).	2011-09-04 09:45:19 +09:00
Bill Currie	5ee01879ec	Missed a spot for net_family.	2011-09-03 16:28:00 +09:00
Bill Currie	80b2b82092	Add a cvar to control the address family. OpenBSD doesn't allow mixed binding of ipv4 and ipv6, but being able to use ipv6 enabled qf with ipv4 addresses would be nice...	2011-09-03 13:04:47 +09:00
Bill Currie	29a52a8cc8	FIx it for IPv4, too. Oops, I forgot about that :P	2011-08-31 18:32:47 +09:00
Bill Currie	bfcdc5ed17	Fix qw networking on OpenBSD. OpenBSD is very picky about the address size, but does provide sa_len and friends to make life easier. Use them as appropriate :)	2011-08-31 18:07:41 +09:00
Bill Currie	f75b0a611b	Some compile fixes for OpenBSD	2011-08-25 22:35:20 +09:00
Bill Currie	0d5bebabe2	Replace qsockaddr with AF_address_t. It seems qsockaddr's assumptions aren't necessarily portable, as OpenBSD seems to be doing weird things with qsa_family. Even if that's not the case, this is cleaner.	2011-08-24 09:14:02 +09:00
Jeff Teunissen	1cc2b1b178	whitespace	2011-08-23 01:39:40 -04:00
Jeff Teunissen	d2fa1e2479	QW IPv6: lose a pointless assign We already assign a->family earlier, no need to do it again.	2011-08-23 01:39:40 -04:00
Bill Currie	87ad73f146	Add even more info to the address comparison failure. It turns out the family check is failing. Why?	2011-08-22 18:34:52 +09:00
Bill Currie	ce07000054	Make the address comparison a little more informative. Still hunting the openbsd connection issues. It seems the address comparision isn't working.	2011-08-22 10:30:35 +09:00
Bill Currie	1402feafd2	Kill some magic numbers and clean up some whitespace.	2011-08-20 16:30:43 +09:00
Bill Currie	cf2845a387	Ensure Sys_Error can not form an infinite loop. I don't remember what propted this change, but it seems like a good idea anyway, so get it into the repository and clean out my stash :)	2011-08-20 13:13:43 +09:00
Bill Currie	bb065bd233	Be a little leniant with vector param stores. qcc always used vector stores to load values into the function parameters, but if the location of the value is too close to the end of the global data block (the vector spans the end of the block), it would trigger the bounds check code. Thus, allow such instructions without a murmer, so long as it actually is a parameter write.	2011-08-16 12:10:05 +09:00
Bill Currie	53049e33eb	Make the interface code more portable. It turns out SIOCGIFINDEX isn't (readily?) available in BSD, but if_nametoindex() is defined by posix, so use that instead.	2011-08-16 10:03:43 +09:00
Bill Currie	4cec4b9f96	Rewrite the interface detection code. Turns out SIOCGIFCONF is rather painful to get working cross-platform. This should work better, and can be used even with ipv6 :)	2011-08-11 18:32:39 +09:00
Bill Currie	c1a60551ae	Clean up default rate setting and add explicit support for 48kHz.	2011-08-11 17:22:14 +09:00
Bill Currie	5feb0454ca	Add and use SYS_SND for both sound and cd debug prints.	2011-08-11 17:20:33 +09:00
Bill Currie	290ac30efc	Fix x11 gamma control. Seems we lost a header include at one stage.	2011-08-11 16:08:20 +09:00
Bill Currie	d3c2afc5d7	Handle old global vector compontents. In the original save gave format, global vectors were saved as individual components rather than as a single vector, using the _x/_y/_z tags on the vector name. However, recent qfcc completely dumped vector components as separate defs, so old save games would have trouble loading with progs built with a recent qfcc. Thus, do the component translation if necessary.	2011-08-11 15:36:51 +09:00
Bill Currie	ff857a9c71	Permit control of single character tokens.	2011-08-11 14:22:27 +09:00
Bill Currie	805256ff65	Use the last used interface address for the socket address. This allows the correct address to be put in the server info packet allowing nq to work on multi-homed hosts. More testing needs to be done to ensure nothing is broken, or better yet, a rewrite of the networking code to properly associate the information with the packets.	2011-08-06 21:47:57 +09:00
Bill Currie	ae9404cc27	Obtain the interface on which the packet arrived. Once I sort out just how to get the information to the right place, this should fix a lot of the problems with nq on multi-homed nodes.	2011-08-06 20:33:20 +09:00
Bill Currie	3088566502	Replace get_address() with get_iface_list().	2011-08-06 18:57:53 +09:00
Bill Currie	6f0ab844ea	Some more nq networking debug prints.	2011-08-06 16:54:01 +09:00
Bill Currie	eba66b1dde	Doc tweaks and some whitespace.	2011-08-02 17:32:36 +09:00
Bill Currie	76f894a29f	Add some debug prints for nq networking.	2011-08-02 15:22:57 +09:00
Bill Currie	e5876752f3	Document the datagram net driver interface.	2011-08-02 15:22:33 +09:00
Bill Currie	e89532cb9f	Fix a couple of missed view.h->clview.h changes.	2011-08-02 11:29:20 +09:00
Bill Currie	8e140bc97e	Use SYS_NET instead of SYS_DEV for networking debug prints.	2011-07-30 17:44:03 +09:00
Bill Currie	28610c08e3	Do not try to build testsound when not building sound libs.	2011-07-30 15:03:19 +09:00
Bill Currie	bf58ad9d80	And silence a "set but not used" warning.	2011-07-29 17:21:33 +09:00
Bill Currie	77dcd07b37	Remove a dead function.	2011-07-29 14:30:54 +09:00
Bill Currie	50341d0972	Whitespace.	2011-07-29 13:51:58 +09:00
Bill Currie	07d5b114bc	Clean out some dead code and variables. We haven't had serial or ipx support for a long time.	2011-07-29 10:11:14 +09:00
Bill Currie	1d57477101	Document the "public" functions of NQ's networking code.	2011-07-26 14:15:41 +09:00
Bill Currie	64881d2eca	Finish the docs for netchan. Also clean out some unnecessary declarations.	2011-07-26 11:30:02 +09:00
Bill Currie	688e5c7e24	Use ncqport_e on the right field. Well, now, that was incredibly silly, wasn't it? :P	2011-07-23 21:39:13 +09:00
Bill Currie	9ccd570105	Fix a problem with linking FLAC libs.	2011-07-23 21:37:34 +09:00
Bill Currie	3678b610eb	Make a start on documenting netchan.	2011-07-23 17:53:06 +09:00
Bill Currie	2035e65bad	Make the qport flags a little more doc friendly.	2011-07-23 17:51:07 +09:00
Bill Currie	e15771f4a4	Nuke a dead function.	2011-07-23 15:58:45 +09:00
Bill Currie	efa0105748	Rename some headers to fix doxygen warnings.	2011-07-23 15:58:45 +09:00
Bill Currie	b17e37f802	Remove uneccessary differences between ip4 and ip6 code	2011-07-23 15:58:45 +09:00
Bill Currie	8ac5079ada	Get inputlines mostly working. It should be only behind-the-scenes updates that are still a problem.	2011-07-09 21:16:38 +09:00
Bill Currie	652b434e7b	Rework the inputline wrapper. Use the resource map code for handle management (much safer). Add support for the enter callback (function or method). Unfortunately, it still doesn't work due to poor design of the inputline user data.	2011-07-09 09:44:37 +09:00
Bill Currie	3dd31b7de9	Fix some bugs found while hacking inputlines.	2011-07-09 09:42:11 +09:00
Antti Harri	358a844a42	Implement --version-info configure switch to override QuakeForge library versioning. From Lasse Collin, thanks!	2011-07-09 01:23:36 +03:00
Bill Currie	4e66a5b327	Add rua rappers for the cvar alias functions.	2011-07-06 19:17:28 +09:00
Bill Currie	6114156b49	Add Cvar_RemoveAlias. Now aliases can be deleted (needed for menus).	2011-07-05 21:59:47 +09:00
Bill Currie	a7291943f7	Fix up Cvar_MakeAlias's error checking.	2011-07-05 21:51:38 +09:00
Bill Currie	d2894a6f68	Rename Cvar_AliasGet to Cvar_MakeAliase.	2011-07-05 20:28:57 +09:00
Bill Currie	a8245e598e	Fix a memory leak. The command hash table is shared between all progs engine instances, but it was being allocated for every instance. Ensure only one is allocated.	2011-07-05 19:05:24 +09:00
Bill Currie	6484dd16c7	Finish cvar alias support. Several functions that manipulate cvars were not checking for aliases.	2011-07-04 21:05:42 +09:00
Bill Currie	0f7390dd60	Clean up all the "set but not used" warnings. gcc on my system is failing to treat this specific warning as an error :/	2011-06-19 10:48:02 +09:00
Jeff Teunissen	85617586af	PCX: display some information on bad PCX files also, minor whitespace on <QF/image.h>	2011-06-14 13:31:30 -04:00
Bill Currie	42ab0a7dbb	Ensure consize is correct in the software renderers. The software renderers force the console size to be the same as the window size (no scaling), but they weren't telling the console of the resize. oops. Fixes the crash when running the software renderers with default sizes.	2011-06-14 17:54:53 +09:00
Bill Currie	c57d252dd4	More "set but not used". Why is finding them so unreliable for me?	2011-06-14 06:26:10 +09:00
Bill Currie	607a4be2e2	Fix a "set but not used" warning/error. I'm not sure what I had planned with "list", so I just commented it out with FIXMEs.	2011-06-13 16:44:30 +09:00
Bill Currie	b18ff4ed3e	Move test-qfs.c into a test directory. Same as before: avoiding -prefic-pic issues. Also, catch some minor snafus found in the previous commit. With this, make distcheck passes again :)	2011-06-12 16:34:15 +09:00
Bill Currie	c522726021	Move the testclip program into its own directory. Same as with the audio test program, this is to avoid issues with -prefer-pic.	2011-06-12 16:12:52 +09:00
Bill Currie	47201137d5	Make the default cd plugin configurable. The default default is file, but now distribution maintainers can change it if necessary.	2011-06-04 17:19:18 +09:00
Antti Harri	8d1bd58ade	snd_dma.c fixes for non-power-of-two values. From Jacob Meuser.	2011-06-04 09:47:15 +03:00
Antti Harri	67c7796c0b	Change default music backend from OGG to CD.	2011-05-31 00:05:35 +03:00
Antti Harri	65789d22d9	Fix PNG build and use AM_CPPFLAGS instead of INCLUDES that is obsolete.	2011-05-28 10:47:11 +03:00
Bill Currie	74a7e07dfc	Use AM_CFLAGS instead of CFLAGS. CFLAGS is meant to be reserved for the user.	2011-05-10 12:44:44 +09:00
Bill Currie	f17b1275ea	Undo an accidental commit.	2011-05-10 11:48:38 +09:00
Bill Currie	77ccf8a824	Build the audio libs before the test dir.	2011-05-10 11:32:38 +09:00
Bill Currie	f7a95ec2f4	Move the test program into its own directory. This is to avoid issues with -prefer-pic (really need to clean things up properly).	2011-05-10 11:25:12 +09:00
Bill Currie	d3771dfeba	Resolve some inlining issues in recent gcc.	2011-05-04 09:31:18 +09:00
Bill Currie	bc2174d92b	Remove some dead variables reported by Spirit.	2011-05-04 09:30:38 +09:00
Bill Currie	2a2a431431	Register a complaint when the map has too many entities. I was wondering why that parrot was dead. Not realizing that negke's coag3 map had too many entities really ruined the pleasure of playing it, so it's best to treat such situations as an error (max_edicts can be bumped up to 32000 if need be, but 2048 is plenty for his map).	2011-04-17 20:06:20 +09:00
Bill Currie	47e55fe1c6	Properly terminate each fisheye quad strip. The horizontal quad strips need to be rendered individually rather than as one single strip. The latter results in ugly triangles crossing the screen.	2011-04-17 13:03:22 +09:00
Bill Currie	55cc0f9206	Bring back the unsigned type (PROGS version bump) This is only low-level support (the unsigned keyword still does not work), but sufficient to make switch statements using jump tables work.	2011-04-09 10:07:47 +09:00
Bill Currie	2bacfdabf2	Interpret func fields as selectors for entities with objects.	2011-03-30 20:19:31 +09:00
Bill Currie	c8e1d7b45a	Fix the API for inputline->enter(). Pass the inputline object rather than the input text, allowing access to both user_data and the input text.	2011-03-27 08:03:39 +09:00
Bill Currie	84afc458fa	Allow the menus to overide the Escape key.	2011-03-25 18:02:59 +09:00
Bill Currie	2be07fd652	Keep the the temp string out of progs for sprintf. There's no need for the string to be in progs memory when printing as the end result will be moved into progs memory regardless.	2011-03-24 11:45:58 +09:00
Bill Currie	b0d1e782ee	Treat allocating less than 1 byte as an error.	2011-03-24 11:10:08 +09:00
Bill Currie	1822290b1a	Fix the double offset of inputline text.	2011-03-24 08:50:32 +09:00
Bill Currie	bc0cffc9c6	Fix handling of autorelease pools in the menu code. Create a "menu_pre" function that creates the autorelease pool, change menu_post() to release the pool correctly, and make the menu internal code require and call menu_pre.	2011-03-21 13:14:14 +09:00
Bill Currie	7c113a12db	Make zone errors a little more useful.	2011-03-20 15:50:09 +09:00
Bill Currie	025c39cc02	Ensure stdout is flushed in the progs signal_hook()	2011-03-20 13:35:59 +09:00
Bill Currie	104c29e4da	Avoid a segfault when the called function is invalid. This is most likely to occur when dumping code from qfo files with external functions.	2011-03-20 13:35:12 +09:00
Bill Currie	f20424afe5	Make "bad type" output more useful. Print the four (assumes non-v6) values in hex rather than "bad type".	2011-03-17 20:35:14 +09:00
Bill Currie	ebfbd7c358	Disable the unsigned comparison instructions. They need unsigned support, or special treatment, so they have to wait.	2011-03-17 20:33:38 +09:00
Bill Currie	bce3935ea6	Add a void address instruction.	2011-03-10 19:28:03 +09:00
Bill Currie	90de6b0499	Add a movepi instruction to support indirect moves of fixed size.	2011-03-09 10:29:24 +09:00
Bill Currie	18005cc80d	Rename move to movei.	2011-03-09 10:28:40 +09:00
Bill Currie	6c4563b21d	Change movep's name from <MOVE> to <MOVEP>.	2011-03-09 10:25:20 +09:00
Bill Currie	4432bc0bef	Make the offset in zone dumps more useful.	2011-03-08 22:44:56 +09:00
Bill Currie	5b8345eecb	Do not try to print values from null entities.	2011-03-07 08:28:20 +09:00
Bill Currie	3b8a3f8302	Remove the vector component skip code from param searches. Local defs no longer contain the vector comonents.	2011-03-06 21:02:29 +09:00
Bill Currie	4794d66f42	Change jumpb's opa type to integer. I'm not 100% certain this is correct...	2011-03-03 19:06:17 +09:00
Bill Currie	57f735c99c	Avoid another segfault when debugging.	2011-02-15 15:33:18 +09:00
Bill Currie	52010b8f7b	Do not segfault with bogus debug info.	2011-02-14 23:10:45 +09:00
Bill Currie	55b7f6eee4	Avoid another segfault when debugging.	2011-02-09 10:13:08 +09:00
Bill Currie	de33cd6017	Ensure auxfunction_map is properly initialized.	2011-02-09 08:28:20 +09:00
Bill Currie	f72d6d6a27	Fix a typo in the opname for integer modulo.	2011-01-27 21:03:11 +09:00
Bill Currie	33db650161	Add QuatInverse to calculate 1/q. There's still no direct quaternion division because I don't know if the definition of q1/q2 is (1/q2)q1 or q1(1/q2) (it does make a difference).	2011-01-18 22:22:18 +09:00
Bill Currie	3c9991364b	Add a "void return" instruction. I got fed up with always having to explicty return something.	2011-01-13 00:29:56 +09:00
Bill Currie	13503198e5	Add quat_origin convenience constant. Same as vec3_origin in that all elements are zero.	2011-01-11 08:41:40 +09:00
Bill Currie	cb0bc7229a	Resurect the debugging messages in rua_obj.c Yet another debug flag: SYS_RUA_OBJ	2011-01-10 12:26:10 +09:00
Bill Currie	6650b35201	Make PR_Get_Param_Def aware of @args.	2011-01-10 12:25:31 +09:00
Bill Currie	75ec6bf244	Clean out some unnecessary types from the progs engine and clean up the mess. This is a nasty commit, sorry, but 99% of the commit is interdependent.	2011-01-10 12:25:31 +09:00
Jeff Teunissen	d764ef80d0	write "color" PCX files (stupid bug)	2011-01-09 04:34:35 -05:00
Jeff Teunissen	68b5db87b2	Document PCX read/write functions & struct	2011-01-09 04:06:50 -05:00
Jeff Teunissen	4090674fa5	LoadPCX(): Turn convert argument into a qboolean.	2011-01-09 04:05:57 -05:00
Jeff Teunissen	af8c1e4cc2	Enable RLE coding for PCX output Pulled from DarkPlaces's lmp2pcx tool, which I have just been made aware of.	2011-01-09 03:06:25 -05:00
Jeff Teunissen	e819ea3b7f	QFimage: Don't use qfs_filesize when loading images Use Qfilesize() to get the size of a read file, don't count on quakefs's global qfs_filesize variable pointing at the right file.	2011-01-09 01:36:40 -05:00
Bill Currie	a85c0713aa	Nuke libQFbuiltins. The gib and "common" builtins are now part of libQFruamoko.	2011-01-04 21:21:19 +09:00
Jeff Teunissen	999252c07a	Fix the same (ancient!) bug in ipv4 code... Don't read the address of the peer until we know we've actually read a packet.	2010-12-30 07:15:22 -05:00
Jeff Teunissen	1b23c470cb	Fix unknown family msgs Found the source of all the bogus "unknown address family" messages -- reading the returned address of an errored read. D'oh!	2010-12-30 06:38:20 -05:00
Jeff Teunissen	9e0575313e	Net debugging Add a SYS_NET developer mask for debugging network, and use it.	2010-12-30 05:01:58 -05:00
Jeff Teunissen	e96cbbdbd9	Captain Whitespace(tm) is back. Don't judge me... :)	2010-12-30 04:58:49 -05:00
Jeff Teunissen	5cfce584c9	ipv4 formatting changes IPv4 addresses should be formatted identically to how we're used to seeing them, without the brackets that denote an IPv6 address and separate it from the port specification.	2010-12-30 04:46:44 -05:00
Jeff Teunissen	e7462d025f	Call freeaddrinfo() when done with the address info.	2010-12-30 04:34:15 -05:00
Jeff Teunissen	e89fb3a868	Nuke a structure I didn't need.	2010-12-30 04:30:16 -05:00
Jeff Teunissen	0a21f6a6df	Move a comment where it belongs	2010-12-30 03:43:46 -05:00
Jeff Teunissen	87dd61a6f8	Fix IPv4 interaction Can now talk to IPv4 hosts again.	2010-12-30 03:42:22 -05:00
Jeff Teunissen	878a9cfb6a	ipv6: builds and works now, still can't interact with ipv4 clients/servers	2010-12-29 07:47:15 -05:00
Jeff Teunissen	fdb4d885ae	ipv6: start cleaning up strict-aliasing problems.	2010-12-29 06:58:14 -05:00
Jeff Teunissen	cdf5ef2565	ipv6: Fix glibc defines	2010-12-29 06:36:43 -05:00
Bill Currie	3090a64faa	Use the correct param for the full_new path. This fixes the broken downloads. *taniwha dons a brown paper bag.	2010-12-28 14:44:26 -05:00
Bill Currie	6e18c3df85	Make qfs developer prints a little more controllable.	2010-12-28 09:08:51 +09:00
Bill Currie	1f0851cc61	Fix QFS_FilelistFill for pak files. Forgot to ensure the path separator was included in the fnmatch param. This fixes the broken *list commands.	2010-12-27 10:31:54 +09:00
Bill Currie	70783e4bd5	Disable all sound calls if jack could not be contacted. This fixes the file handle leak when jack is unavailable.	2010-12-25 20:31:14 +09:00
Bill Currie	14480fd1b4	Move the call to R_ClearEnts to the renderer. This fixes the hang on certain maps in qw-client.	2010-12-25 19:59:34 +09:00
Bill Currie	e65d1a7ccf	Remove a redundant assignment.	2010-12-25 19:59:34 +09:00
Jeff Teunissen	9defba8d92	Get rid of plugin versioning (again). automake needs -avoid-version to be in Makefile.am, otherwise it doesn't make libtool do the right thing...or something. My head hurts. ;)	2010-12-25 04:45:39 -05:00
Jeff Teunissen	bbc8154ec7	joystick fixes Make /dev/input/js0 the default joy_device, and temporarily bump max buttons to 18 (until I kill the maximums entirely)	2010-12-24 05:03:32 -05:00
Bill Currie	ce64227a71	Fix for debian wildmidi. This might break lenny :/	2010-12-24 17:33:09 +09:00
Bill Currie	de04e1b602	Lots of win32 (mingw cross) build fixes. HTTP (curl) support is missing, but everything else builds.	2010-12-23 11:40:16 +09:00
Bill Currie	889bbd364e	Explicitly link testsound against libQFutil.	2010-12-18 22:21:55 +09:00
Bill Currie	23d3407622	Change a few defaults as suggested by bigfoot. in_dga -> 0 (until X is fixed) gl_multitexture -> 1 (why was this 0? not enough support back then?) cl_usleep -> 1 (seems to be ok) host_mem_size -> 40 (even 32 isn't enough these days) rate -> 10000 (we're not in the modem era any more) cl_mem_size -> 32 (16 is not enough, 32 sounds better than 24)	2010-12-16 11:34:39 +09:00
Bill Currie	765807def0	Make sdl's sound parameters easy to tweak.	2010-12-15 18:48:25 +09:00
Bill Currie	d265bbf011	Support any sample rate.	2010-12-15 18:48:25 +09:00
Bill Currie	df65679028	Remove support for alsa 0.9. It's way obsolete and I doubt we'll ever need it again. I do wonder what to do abut sun, sgi etc.	2010-12-15 18:48:25 +09:00
Bill Currie	9b9a60aa89	Make the -mem suggestion a little more realistic. 16M hasn't been enough for a long time.	2010-12-13 19:11:48 +09:00
Bill Currie	774f049646	Fix garbage at edges of conchar characters. Move the texture coordinates in 1/4 of a pixel. To avoid unnecessary calculations, pre-caclulate the character cell texture coordinates and blast them into the the texture coordinate array.	2010-12-11 12:09:30 +09:00
Bill Currie	8919aec663	Get global fog working in mtex mode.	2010-12-10 21:40:36 +09:00
Bill Currie	ce96e6b055	The beginnings of fog support. gl_fog.c is taken from fitzquake with only minor modifications to get it into QF. Other than worldspawn/network parsing, it's not used yet.	2010-12-10 17:17:30 +09:00
Bill Currie	6114495870	Don't try to load skys named "". This makes 'loadsky ""' and 'loadsky none' equivalent.	2010-12-10 17:17:30 +09:00
Bill Currie	c4f71c0cda	Move r_skyname handling from R_NewMap to R_LoadSkys. r_skyname now acts as the default sky to use when no sky name is specified by other means ("none" is still no sky). 'loadsky foo' will load the "foo*" sky textures, 'loadsky none' gives the default sky, and 'loadsky ""' causes uses r_skyname.	2010-12-10 17:17:30 +09:00
Bill Currie	8e557e81b6	Break out the guts of Ed_LoadFromFile into ED_Parse. ED_Parse does not support progs privided parsing (at this stage, anyway), but this will allow clients to easily get at the entities in a map.	2010-12-10 17:17:29 +09:00
Ragnvald Maartmann-Moe IV	843823de84	testsound depends on libQFutil	2010-12-10 17:07:06 +09:00
Bill Currie	981622f969	Make MOD_TraceLine behave "correctly". MOD_TraceLine now behaves the same as id's SV_RecursiveHullCheck (from WinQuake). This means that even if the trace would escape from solid space into non-solid space, the trace is treated as allsolid if it crosses from one solid space to another before hitting the empty space. trace-id.c is used only for establishing the behaviour of id's code.	2010-12-06 15:30:56 +09:00
Bill Currie	c2af7896bd	Revert "make droptofloor continue the trace if it starts solid" This reverts commit `10232acdfe`. The problem was really in the trace code, but it got fixed by "accident" when I had similar problems in hipnotic a couple of years later. Now to figure out just what the trace could really should be doing.	2010-12-05 14:56:32 +09:00
Bill Currie	31640dd1b9	Clean out the last traces of my boxclip code. I've been experiencing funny trace issues while playing Soul of Evil. While I think the boxclip dregs shouldn't be causing problems, it's probably best to clean them out properly before trying to fix anything.	2010-12-05 14:52:20 +09:00
Bill Currie	b1b1a02c6c	Get entity allocation and freeing working correctly. This fixes the missing static entities.	2010-12-04 23:37:58 +09:00
Bill Currie	a4b97e9e2e	Dynamic entity allocation. Unlimited static entities. Entities can now be allocated dynamically. They are freed whenever a new map is loaded. Use the dynamic entities for static entities.	2010-12-03 21:01:52 +09:00
Bill Currie	a6941e27ef	Eliminate MAX_VISEDICTS. Unlimited visible entities. The renderer can now render as many entities as can be crammed into the currently visible set of nodes.	2010-12-03 14:59:02 +09:00
Bill Currie	f98b002f9e	Make R_StoreEfrags const-correct. R_StoreEfrags does not need to modify its parameter or anything to which it directly refers, so make the pointer single-level and constant.	2010-12-03 13:30:49 +09:00
Bill Currie	085b0f4448	Remove R_SplitEntityOnNode2 When R_AddEfrags is used (as is the case in nq), this function is redundant. Brush models in qw are currently broken (invisible), but that's just a matter of getting qw to use R_AddEfrags instead of R_NewEntity. This removal should speed up the software renderers a little bit.	2010-12-02 08:31:48 +09:00
Bill Currie	8831a109a4	Create and use mclipnode_t. I didn't realize this was a critical part of fitzquake's large map support. This should fix the non-solid brush entities in Conflagrant Rodent.	2010-11-29 09:36:21 +09:00
Jeff Teunissen	b0217bf0cf	Merge branch 'master' into forge	2010-11-28 03:05:30 -05:00
Bill Currie	98a5d591d5	Don't read past the end of a sub-file. This fixes a libvobis streaming problem with vorbis files within pak files.	2010-11-28 11:28:44 +09:00
Bill Currie	341726afb9	Reimplement Qgets using Qgetc.	2010-11-28 11:18:07 +09:00
Bill Currie	185e21e4e4	Tweak some developer cvar usage.	2010-11-27 16:53:17 +09:00
Bill Currie	9900aa3d02	Fix vid_fullscreen for modern X window managers. We are now compliant with wm-spec 1.4, so fullscreen toggling should always work.	2010-11-27 16:19:04 +09:00
Bill Currie	e53ff2a36d	A bit of house keeping.	2010-11-27 15:10:34 +09:00
Bill Currie	dd87274027	DGA mouse tweaks. o Check the return value of XF86DGADirectVideo. o Use input_grabbed instead of in_grab for checking whether to enable dga mouse and other grabbed actions.	2010-11-27 09:25:29 +09:00
Bill Currie	f31595781c	Add and used SYS_VID for video/targets masked prints.	2010-11-27 08:48:00 +09:00
Bill Currie	cacd2fb895	FiztQuake's lerping system. Seems to be mostly working. I get some funny results for zombies, but that might be moving and turning at the same time causing issues.	2010-11-26 16:20:05 +09:00
Bill Currie	31c13d92a2	Protocol 666/large map support from FitzQuake. Alpha and lerping aren't implemented yet, but things seem to be working. I can load and play oms2.bsp (Conflagrant Rodent).	2010-11-26 16:20:05 +09:00
Bill Currie	8c4fe2f844	Rename Sys_DPrintf to Sys_MaskPrintf. We now have finer runtime control over what gets printed. Need to do a SYS_DEV audit, creating new masks as apropriate.	2010-11-26 16:19:26 +09:00
Bill Currie	92f84e97a4	Unlimited loaded models.	2010-11-26 16:19:25 +09:00
Bill Currie	abc17c1d91	New cvar commands from fitzquake.	2010-11-26 16:19:25 +09:00
Bill Currie	d6ceaef7d2	Whee, 64bit cpus and sizeof.	2010-11-24 20:42:07 +09:00
Bill Currie	addbcaa09c	Add PL_GetFromFile builtin. This is an extension "wrapper" (no such C function). This allows ruamoko programs to read property lists without worrying about the memory required to store the string for the property list being read.	2010-11-24 17:01:19 +09:00
Bill Currie	defc2a264b	Add QFile_GetHandle() This allows other rua builtins to make use of ruamoko files.	2010-11-24 17:01:19 +09:00
Bill Currie	fc2a6e0fb7	Don't be so spammy with file errors. Record a file even if it could not be found. This way, the error message gets printed once per file rather than every time.	2010-11-24 17:01:18 +09:00
Bill Currie	3878b76cc5	Start using autorelease. Much more testing is required (oh, but for qc-valgrind), but there is now a ~945kB block of free data in the menu progs heap :). Also, correct the printed size of the memory block to not include the block header size.	2010-11-24 17:01:18 +09:00
Bill Currie	4518e6af91	First stab at implementing autorelease. It's probably nowhere near right, but probably ok for now (I need to study the GNUStep code). I'm unhappy with the menu code hook, but it will have to do for now.	2010-11-24 17:01:18 +09:00
Bill Currie	5fc4ef63f6	Rewrite ruamoko plist support to use handles. The plist code was written long before I thought of resource handles, and then it was forgotten. This is much nicer and safer than storing C pointers in progs memory space (shudder).	2010-11-24 17:01:18 +09:00
Bill Currie	763cec3838	Some spelling/grammar corrections.	2010-11-24 17:01:18 +09:00
Bill Currie	d4ae231f34	sezero's NET_SendToAll fix Here's a patch to NET_SendToAll() which was always broken: it never skipped non-connected clients. Depending on the compiler, it would wait the whole 5 seconds of its blocktime before it gave up. While there, changed its blocktime argument to double (the comparison is against a double.)	2010-11-21 14:27:43 +09:00
Bill Currie	1dfb914c46	fix an oopsie (rebase!!)	2010-11-21 14:25:32 +09:00
Bill Currie	4cec187465	zixthree's wav file patch Wav file were not read correctly when encoutering most chunk type beside the ones used by QuakeForge. This patch will fix the riff loader code so that unused but defined chunk are skipped. Most wav files should now be loaded correctly fixing some silent sound effect. Also fixed a typo in wav loader and reordered wav validity check so that format is checked first. The data chunk could be inexistant on some weird format and so an invalid format is a more helpful error text. ! Fix: Skip unsupported chunk in riff loader instead of rejecting riff file. ! Fix: typo in Microsoft name. ! Fix: ordering of wav validity to enable more helpful error text.	2010-11-21 14:18:15 +09:00
Bill Currie	99e87b092b	zixthree's stereo swap patch. Modified slightly for formatting and cleaner swapping.	2010-11-21 14:09:23 +09:00
Bill Currie	6771e7b8b5	sezero's win32 Sys_ConsoleInput patch.	2010-11-21 13:55:03 +09:00
Bill Currie	204c509a43	sezero's "Bad old_size value in Z_Realloc()" patch.	2010-11-21 10:06:56 +09:00
Bill Currie	15b423cbe7	Track 0 is used to stop the BGM	2010-11-20 14:32:27 +09:00
Bill Currie	3309f483b6	Don't require pr_boundscheck for quoth. I don't know about other FTEqcc compiled progs, but quoth doesn't try to do anything clever (all its denormals are either vars of the wrong type, or -0.0).	2010-11-20 14:12:40 +09:00
Bill Currie	9d6fd32206	Ensure the the progs data is aligned. Some QuakeC compilers (eg, FTE) insert a data chunk between the progs header and the rest of the progs data. Unfortunately, FTE does not maintain the assumed 32-bit alignment.	2010-11-20 09:02:56 +09:00
Bill Currie	2f504709dd	Print data being loaded from an entity.	2010-11-20 00:31:34 +09:00
Bill Currie	232d2f7e18	Fix an undefined operation thanks to spirit of the domain quaddicted.com.	2010-11-16 17:13:22 +09:00
Bill Currie	6260130ae5	Fix borked autoconf of dga/vidmode headers.	2010-11-16 00:58:19 +09:00
Bill Currie	37fb8d22da	Don't open a streamed sfx when there's no sound driver. This happens when qf fails to connect to jackd (possibly other times). There is probably a better solution to the problem, but not opening a stream when the sample rate is reported as 0 definitely fixes the inifinite recursion in read_samples().	2010-11-14 20:46:29 +09:00
Bill Currie	824e33c82b	Fix a sizeof braino. Somebody (probably me) got a little over-happy with sizeof.	2010-11-14 19:22:47 +09:00
Bill Currie	f63e505c92	Don't realloc the string pointer table. This causes a bit of memory waste, but avoids breaking the pointers in the string hash table.	2010-11-14 19:21:16 +09:00
Bill Currie	e6b783a616	Don't touch the watchpoint conditional when printing.	2010-11-13 14:36:33 +09:00
Bill Currie	ff49239500	Fix shared config files. We've allowed a single level of parent directy access in quake path names for a long time, but this got broken by qfs_expand_path. Thus, make qfs_expand_path allow a certain number of parent directory levels (usually 0 or 1).	2010-10-16 14:17:09 +09:00
Bill Currie	ef7958d680	Lots of const correctness.	2010-10-13 20:52:08 +09:00
Bill Currie	9a30968c87	type size correctness	2010-10-13 20:52:06 +09:00
Bill Currie	cd159e1cc1	Use LoadBSPMem to load brush models. Now that Mod_LoadBrushModel uses bspfile.[ch], the engine uses the same code as the tools to work with bsp files.	2010-10-13 20:52:05 +09:00
Bill Currie	db898655d1	make LoadBSPFile own the memory for the bsp data	2010-10-13 20:52:05 +09:00
Bill Currie	719ca15516	make LoadBSPMem work in-place LoadBSPMem now modifies the passed in buffer rathern than allocating new memory. One step closer to cleaning up brush model loading.	2010-10-13 20:52:05 +09:00
Bill Currie	56fb4d9a22	allow safe bsp freeing any memory the bsp thinks it does not own will not be freed	2010-10-13 20:52:05 +09:00
Bill Currie	1d86e71404	make WriteBSPFile take a const bsp_t * This means that the supplied bsp can now be reused, as it should be.	2010-10-13 20:52:05 +09:00
Bill Currie	f4042c5b91	Make the bsp disk data structures type size independent. However, this assumes float is always 32 bits. Also use size_t for the *size fields in bsp_t and clean up the mess.	2010-10-13 20:52:05 +09:00
Bill Currie	3f08268038	Make sure unterminated lump names don't cause propblems when comparing.	2010-10-10 18:31:14 +09:00
Bill Currie	1902ca6159	Ensure the string to be hashed is terminated.	2010-10-10 18:21:30 +09:00
Bill Currie	7dc1ccdbea	Add a function for retreiving the parsed token. Saves having to reach into the token's dstring (script->token->str was getting annoying).	2010-09-26 13:50:17 +09:00
Bill Currie	827d0d0ad6	Scripts now treat {}()': as single character tokens.	2010-09-26 13:50:17 +09:00
Bill Currie	f666f8d27a	Get the lib dependency for testsound right. No need for $(top_builddir) when the lib is in the same directory. Fixes parallel builds.	2010-09-25 23:07:06 +09:00
Bill Currie	42faad9015	Move expand_squiggle() from quakefs to sys, and rename to Sys_ExpandSquiggle. Hopefully the final resting place of this function.	2010-08-25 14:00:04 +09:00
Bill Currie	e9bd9a4baa	Move QFS_CreatePath() to Sys_CreatePath().	2010-08-25 13:52:24 +09:00
Bill Currie	4f620655be	Document quakefs.h	2010-08-25 13:40:22 +09:00
Bill Currie	f1943ebaab	Fix some path compression bugs.	2010-08-25 13:38:45 +09:00
Bill Currie	550b094b93	Unit testing for QFS_CompressPath	2010-08-25 13:38:30 +09:00
Bill Currie	05c57f219d	Nuke a comment.	2010-08-25 13:38:24 +09:00
Bill Currie	c6be3c469a	Make the names of static functions canonical.	2010-08-25 13:38:24 +09:00
Bill Currie	bbf2ac0204	Avoid creating // in path names.	2010-08-25 13:38:18 +09:00
Bill Currie	ba8ca132a9	Change QFS_Gamedir()'s parameter from dir to gamedir.	2010-08-25 13:31:24 +09:00
Bill Currie	745bdfafdf	Eliminate QFS_LoadHunkFile(). It is unused, and part of the group of functions I wish to remove from QF.	2010-08-25 13:31:23 +09:00
Bill Currie	cbee789fe1	Change ProgPath to ModelPath and dir.progs to dir.models. The default is still $path/progs, as that is what is expected by the game-code.	2010-08-25 13:31:13 +09:00
Bill Currie	cf40f5073d	Nuke QFS_WriteBuffers. This function is too dangerous for my liking, and it's now unnecessary since qfs has been locked down.	2010-08-25 13:31:13 +09:00
Bill Currie	031055a91f	Move the qfs_* cvars out of quakefs.h The qfs cvars are all private.	2010-08-25 13:31:13 +09:00
Bill Currie	0cc4bc8c69	Move searchpath out of quakefs.h. It's not needed, nor should it be used, anywhere else.	2010-08-25 13:31:13 +09:00
Bill Currie	478394ef81	Nuke MAX_GAMEDIR_CALLBACKS The number of gamedir callbacks is now unlimited.	2010-08-25 13:31:08 +09:00
Bill Currie	a51e888a1b	Nuke MAX_OSPATH and clean up the mess.	2010-08-25 13:31:08 +09:00
Bill Currie	baede61f4f	New function: dstring_strdup I got tired of always doing dstring_newstr/dstring_copy, so I thought it was time to wrap it. dstring_strdup is the dstring equivalent of strdup.	2010-08-25 13:31:00 +09:00
Bill Currie	5a6e66b23e	hopefully, correct plugin linking options how we got away with this for so long is beyond me, but it seems libtool really wants -rpath even for plugins (otherwise it refuses to install them)	2010-08-21 13:01:35 +09:00
Bill Currie	2185a3dcd0	Remove almost all of my boxclip developement. This is to prevent others accidently getting headaches from my code.	2010-08-20 14:13:23 +09:00
Bill Currie	fd24170b32	get the behavior or PL_NewData correct It taking ownership of the data was the correct behavior, so go back to that.	2010-08-20 13:21:22 +09:00
Bill Currie	a744caa421	The public api of qfplist is now fully documented. Evertyhing that can or should be private now is, and all public functions are documented.	2010-08-20 13:10:37 +09:00
Bill Currie	1442273a8f	more opaque correctness	2010-08-20 12:58:37 +09:00
Bill Currie	f55c203c5e	use the plist api correctly don't work directly with the plist data. the structs that enabled that will go away shortly.	2010-08-20 11:57:47 +09:00
Bill Currie	669771681a	split up and modernize configure.ac Most of the guts of configure.ac have been moved to config.d and are then brought in by m4_include. This will make maintaining configure.ac much easier. Also drop use of PROGRAM and VERSION, using PACKAGE_NAME, PACKAGE_VERSION, and on occasion, PACKAGE_STRING instead, and clean out some old files we no longer need.	2010-08-19 15:01:43 +09:00
Bill Currie	4449f10c0a	get alsa and sdl working, though sdl seems to be mono only	2010-08-15 05:15:47 +00:00
Bill Currie	bc4a3e79dc	d'oh, bogus $	2010-08-14 02:48:53 +00:00
Bill Currie	81ac779b7f	forgot to add libsamplerate to the default renderer	2010-08-14 02:38:19 +00:00
Bill Currie	cc697236e5	bah, forgot that libsamplerate doesn't check for errors	2010-08-13 01:48:48 +00:00
Bill Currie	54fc922f6c	better error checking while reading streamed data	2010-08-13 01:48:20 +00:00
Bill Currie	ce5658416d	add support for up to 8 channels in sound effect files The sounds are down-mixed to 2 channels (qf does not (yet) support more than 2 channel output), but this allows pretty much anything to be used for a source of music. Only 5.1 (6 channel), stereo and mono have been tested, but the others should work (any issues would be mis-interpretation/implementation of the channel layout).	2010-08-12 02:28:27 +00:00
Bill Currie	b1620616b9	reset the "resampler" when seeking	2010-08-11 23:47:31 +00:00
Bill Currie	22e8698827	resampling now works However, no fallback for when libsamplerate is missing.	2010-08-11 23:47:03 +00:00
Bill Currie	1c985bc925	bah, forgot these	2010-08-11 23:46:28 +00:00
Bill Currie	3499f5257f	add a test app and a workaround for the clicking in the resamled stream the proper fix for the clicking is to either use SRC's callback resampler or fix snd_mem.c to handle not getting the samples it expects, but I think the callback will be better in the long run.	2010-08-11 23:45:56 +00:00
Bill Currie	0e3b395943	ok, non-resampled flacs now work beautifully	2010-08-11 23:45:32 +00:00
Bill Currie	7502cd9ec5	making slow progress on sound quality streamed oggs playback cleaning when not resampling, but flacs are still crap	2010-08-11 23:45:09 +00:00
Bill Currie	65a748fc3c	floating point mixer now working the resampler is being badly abused for streams, and it's not yet properly autoconfiscated, but things are working. Better yet, at the correct pitch and speed.	2010-08-11 23:44:34 +00:00
Bill Currie	2bb2d14b89	make "sample counts" frame based rather than mono sample based that was always horribly confusing	2010-08-11 23:43:35 +00:00
Bill Currie	d0906f1453	conditionally build the sound format support files Rather than using an ifdef around the entire code, get autoconf to do the work for us. For one thing, this allows doxygen to produce decent docs. It also makes for less compalation when building without support for various formats.	2010-08-11 23:42:42 +00:00
Bill Currie	c0a8c6c695	properly prefix all functions, static or not makes doxygen produce better docs	2010-08-11 23:41:04 +00:00
Bill Currie	ac44950a69	sanitize the code by using defines for old flac libs	2010-08-11 23:40:35 +00:00
Bill Currie	46a067b2f6	Do proper error handling when loading sound files. This fixes the segfault grg got when trying to play a 5.1 channel file.	2010-08-08 03:02:55 +00:00
Bill Currie	0bbb805b94	fix a case&paste error pointed out by grg	2010-08-08 01:58:17 +00:00
Bill Currie	0dfff8fd58	ignore stuff	2010-08-07 10:42:09 +00:00
Bill Currie	adee45d22b	add a comment about the valid range of samples	2010-08-06 01:58:12 +00:00

... 9 10 11 12 13 ...

3704 commits