Literals written out as if they were unsigned and having the highest-order
bit set are all too ubiquitous, like hitscan masks for example.
git-svn-id: https://svn.eduke32.com/eduke32@2742 1a8010ca-5511-0410-912e-c29ae57300e0
Also,
- don't strip const when passing the char ptr to it and a couple more
instances in game.c
- use g_netPort when -connect parameter doesn't have a port suffix (":XXXX"),
so that e.g.
eduke32 -port 1700 -connect localhost
is the same as
eduke32 -connect localhost:1700
(-port must come before -connect, unfortunately.)
git-svn-id: https://svn.eduke32.com/eduke32@2737 1a8010ca-5511-0410-912e-c29ae57300e0
This was supposed to go into the last commit, but I did
git commit --amend
without adding the changes to the index. Now I'm too lazy to sort
things out.
git-svn-id: https://svn.eduke32.com/eduke32@2736 1a8010ca-5511-0410-912e-c29ae57300e0
The GAMESTATE one has to be carried out twice, first on the data from
xd3_encode_memory, and then with the compressed data (because it might have
increased in size, though this is very unlikely). The MOVE check is
similar, though there, failure of the first check implies corrupt memory
(which is why we're Bassert'ing that condition).
Currently, the overflow on GAMESTATE sending happens when switching to a
different map.
git-svn-id: https://svn.eduke32.com/eduke32@2735 1a8010ca-5511-0410-912e-c29ae57300e0
These are element indices for a while now. Also eliminate some dead
code afterwards.
git-svn-id: https://svn.eduke32.com/eduke32@2731 1a8010ca-5511-0410-912e-c29ae57300e0
r2727 made old savegames incompatible, as an array with MAXVOLUMES*MAXLEVELS
is saved in Gv_WriteSave().
git-svn-id: https://svn.eduke32.com/eduke32@2730 1a8010ca-5511-0410-912e-c29ae57300e0
New Wii control defaults for the Wii Remote + Nunchuk and the Classic Controller. This includes new code added just so that the Home key brings up the menu in-game, reducing the need for a USB keyboard.
On the technical side, raw joystick access (comparable to what is available for keyboard and mouse) is now present in jmact, on the game side. (added: joystick.[ch])
Using this new raw joystick access, I replaced tueidj's hack to map A and B to LMB/RMB and D-Pad Up/Down to the scrollwheel.
I made the menus more friendly to mouse and joystick browsing by adding and unifying checks and clears for various buttons and gamefuncs. In fact, the majority of the time spent on this commit was tracking down problems that appeared with the factoring and trying to understand the menu system and the way input checks are precariously executed.
In addition, "Press any key or button to continue" now truly means what it says.
As a result of incorporating proper raw access into control.c instead of it directly accessing the implementaiton, the program *may* no longer be affected by joystick input when it is out of focus. This follows the pattern set by the mouse, and I think this is a positive change.
A small bonus: In the classic/old keyboard preset, the key for Show_Console has been changed from '`' to 'C' because '`' is taken by Quick_Kick.
git-svn-id: https://svn.eduke32.com/eduke32@2728 1a8010ca-5511-0410-912e-c29ae57300e0
NAM and Napalm can now share their con, def, and rts files if the one for their respective game is not present because the con and rts files are identical.
Also, decapitalize two string literals missed in r2540.
git-svn-id: https://svn.eduke32.com/eduke32@2726 1a8010ca-5511-0410-912e-c29ae57300e0
(LUNATIC build only.)
Also, a minor problem is identified. sizeof(actor_t) is 124 on 64-bit platforms,
while the expected size is 128 bytes. This needs to be corrected whenever the
next savegame version bump happens.
git-svn-id: https://svn.eduke32.com/eduke32@2724 1a8010ca-5511-0410-912e-c29ae57300e0
Usage is from 3D mode only. When a sector (or wall) is committed to the
clipboard, it (or the wall's sector) is saved, and is subsequently used
when auto-aligning [;-ENTER] another sector's ceiling or floor against the
reference one's. This temp. sector is reset on any structurally modifying
operation except setting first walls; also, aligning extended ceilings or
floors is impossible as they use .*xrepeat internally.
The auto-alignment does not change picnums (this can be accomplished with
the ['+ENTER] combination), but copies the orientation bits 2^{2..6} to the
alignee. Afterwards, if the reference is relative-aligned, it tweaks them,
so that every case where the two firstwalls are either parallel or perpendi-
cular is handled correctly.
It does not yet calculate the panning values.
git-svn-id: https://svn.eduke32.com/eduke32@2715 1a8010ca-5511-0410-912e-c29ae57300e0
Also factor out the code (2x) setting the alignment bits for sprites.
git-svn-id: https://svn.eduke32.com/eduke32@2712 1a8010ca-5511-0410-912e-c29ae57300e0
Defines SPRITES_OF(Statnum, Iter) and SPRITES_OF_SECT(Sectnum, Iter)
[The first is so that STAT_* can be substituted for Iter and it reads nicely.]
Usage should be self-explanatory, but one thing to keep in mind is that
the sprites that are iterated over MUST NOT be deleted.
git-svn-id: https://svn.eduke32.com/eduke32@2707 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes the glitches/corruption whereever showview is used from
EVENT_DISPLAYROOMS while the scene is actually rendered to a tile instead of the
frame buffer, for example because we have a tilted view or "pixel doubling"
enabled. Fixing it for real (i.e. so that the showview actually completes)
will require more effort.
git-svn-id: https://svn.eduke32.com/eduke32@2706 1a8010ca-5511-0410-912e-c29ae57300e0
This is done by kopen4loadfrommod'ing and immediately closing the file
(since the checker is still run from there when not ingame).
On my system, times were like 0.12 ms, 0.2 ms and 0.5 ms for each
openfrompath/findfrompath, openfrompath/Bopen and SHGetFileInfo
respectively, so it shouldn't have a too noticable impact on initial
loading times.
git-svn-id: https://svn.eduke32.com/eduke32@2704 1a8010ca-5511-0410-912e-c29ae57300e0
I experienced the following on Windows XP: a few openfrompath() -->
findfrompath() calls were taking enormously long (4.5 secs) to complete, having
been passed a file name like "//bla/qwe.asd". My guess is that Windows then
tried to interpret these as a network FS path in access(), and the 4.5 secs
represents a timeout value.
git-svn-id: https://svn.eduke32.com/eduke32@2703 1a8010ca-5511-0410-912e-c29ae57300e0
The first means that the expensive (~0.5 ms) SHGetFileInfo() calls won't inter-
fere with smooth gameplay, but files that are opened only at game-time like
sounds won't be checked. The second means that there are now less false
positives, i.e. warnings about files that would be found due to the
check-all-{upper,lower} hack.
git-svn-id: https://svn.eduke32.com/eduke32@2702 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes the crash on Wii when looking sidewards (e.g. when dying), but
makes the tilted view look more pixelated.
The problem was that an attempt was made to render onto a 640x640 tile for
the rotated view, but the base engine arrays were too small for that.
git-svn-id: https://svn.eduke32.com/eduke32@2698 1a8010ca-5511-0410-912e-c29ae57300e0
Also, correct the loadboard() return value checks in premap.c to be
aware of a returned -2 ("wrong map version").
git-svn-id: https://svn.eduke32.com/eduke32@2694 1a8010ca-5511-0410-912e-c29ae57300e0
They were broken by r2666, which made their elements intptr_t instead of
int32_t, but this change was not reflected in related allocation code.
WARNING: players on 64-bit platforms should not attempt to load games saved
with r2665 or earlier.
git-svn-id: https://svn.eduke32.com/eduke32@2689 1a8010ca-5511-0410-912e-c29ae57300e0
- alloc_multimapstate() helper
- make g_netMapRevision a uint32 and store save->revision in sequence order
(without &(NET_REVISIONS-1))
- one assert, one XXX comment, stylistic changes
git-svn-id: https://svn.eduke32.com/eduke32@2674 1a8010ca-5511-0410-912e-c29ae57300e0
For Lunatic, we'll want to get rid of the t_data --> script indirections, since
the latter will be no more. Thus, all parameters are saved in t_data directly.
For the normal build, there are no changes, only stylistic tweaks.
git-svn-id: https://svn.eduke32.com/eduke32@2669 1a8010ca-5511-0410-912e-c29ae57300e0
EVENT_SOUND: triggered upon playback of any sound, this allows the "hard coded" sounds to be altered in a context-aware fashion instead of having to resort to clunky hacks like replacing them with a blank sound effect. RETURN var
iable is set to the sound effect # of the sound to be played, or -1 to cancel playback.
EVENT_CHECKTOUCHDAMAGE: triggered in P_CheckTouchDamage() whenever the player collides with anything. Value of RET
URN is set to the result provided by clipmove() and so can be decoded in the same way. Value of RETURN when the event is over can also be manipulated to control some of the hard coded damage effects.
EVENT_CHECKFLOORDAMAGE: triggered in P_CheckFloorDamage(), RETURN is simply the picnum of the floor of the sector t
he player is in. Can be used to cancel hard coded floor damage effects or to make other tiles exhibit the same eff
ects
Other misc fixes and cleanups, including a possible workaround for Duke Plus SECTOREFFECTOR light issues wherein all SE49 and SE50 that have a statnum of STAT_EFFECTOR are simply changed to STAT_LIGHT during the STAT_EFFECTOR loop
now.
git-svn-id: https://svn.eduke32.com/eduke32@2652 1a8010ca-5511-0410-912e-c29ae57300e0
The remaining checks now "continue;" when an oob tilenum is found where
an oob access would ensue else. Also, it's now checked for negative
numbers (the message remains the same though).
git-svn-id: https://svn.eduke32.com/eduke32@2651 1a8010ca-5511-0410-912e-c29ae57300e0
The primary reason for doing this is that handing of moving sectors is
significantly simplified. Because moving sectors usually don't move containing
SEs/effector-statnum sprites, no special handing code is needed to move light
SEs with them. Thus, this commit sets light SEs to a new statnum when they're
spawned *from premap*, and a new G_Move*-like function (called G_DoPolymerLights)
is added to process every sprite in that status list.
This should "fix" light SEs moving together with a variety of moving sectors,
but CON programs expecting the old behavior may break, therefore this commit is
marked as experimental.
Additionally, a problem with the old implementation is identified: it seems like
the correct functioning is dependent upon the order of processing between the
sector movement effector and the light SE, so this makes it another good reason
for the change. (A third one is that all lights can be processed with a per-
statnum loop, but CON coders should not do this until the change is considered
final).
git-svn-id: https://svn.eduke32.com/eduke32@2646 1a8010ca-5511-0410-912e-c29ae57300e0
- Make MAXXDIM and MAXYDIM macros be 860 and 490, respectively. tueidj says
max. screen size is 848x480, but there are oob access bugs in the classic
renderer when running with the maximum possible resolution
- don't allocate additional sector/wall storage for Mapster (saves ~16k)
- Add ud.config.UseJoystick = 1 in config.c, but make it conditional on Wii
- remove one comment I no longer believe true, add one TODO comment
git-svn-id: https://svn.eduke32.com/eduke32@2645 1a8010ca-5511-0410-912e-c29ae57300e0
This is so that it may be intercepted in the future.
The only code that's not replaced by the function call is with the CON
interface to g_player[].ps->pals via player[].pals X and .pals_time.
Also, comment out one instance because it's overwritten by a succeeding one.
git-svn-id: https://svn.eduke32.com/eduke32@2643 1a8010ca-5511-0410-912e-c29ae57300e0
Besides being the compiler's job nowadays, they significantly inflate
the size of the debugging builds.
git-svn-id: https://svn.eduke32.com/eduke32@2640 1a8010ca-5511-0410-912e-c29ae57300e0
Among other things, comment out very seldomly (or not at all)
used sprite member macros: SV, ZV, RX, RY, CX, CY, CD, PL.
git-svn-id: https://svn.eduke32.com/eduke32@2639 1a8010ca-5511-0410-912e-c29ae57300e0
(I.e. also restore r2232 again.)
The first one is the palette restore logic in G_DisplayRest, the second
is CON setgamepalette, to which the "don't gltexinvalidateall()" bit is
added to mimic the first. Hightile invalidations aren't really useful for
anything other than reloading them after a video mode change, IMO.
These changes mean that
1) active full screen tints should (almost) always be kept with a basepal
change. The only exceptions to this are when tints really have to be
cleared, e.g. when changing the player view in co-op play.
2) there should be no performance issues with simultaneously changing
basepals while a tint is applied
git-svn-id: https://svn.eduke32.com/eduke32@2637 1a8010ca-5511-0410-912e-c29ae57300e0
The sliders themselves still permit changing values, but are drawn with a
'disabled' shade because they're non-functional with software gamma.
git-svn-id: https://svn.eduke32.com/eduke32@2635 1a8010ca-5511-0410-912e-c29ae57300e0
- in actors.c, make a static array const (the original patch removed the
staticness)
- remove one comment and change some compiled-out code
- remove commented out pre-Makefile.common stuff
Some changes were not adopted from tueidj's patch:
- whitespace cleanup
- ud.config.UseJoystick = 1 in config.c
- Makefile.common, as mentioned before
- proper read-in of g_numRealPalettes, because it was done with r2503
git-svn-id: https://svn.eduke32.com/eduke32@2632 1a8010ca-5511-0410-912e-c29ae57300e0
- BIGX -> BIGX_, likely again because of a name clash
- make a loop in animlib.c iterate in forward direction
git-svn-id: https://svn.eduke32.com/eduke32@2631 1a8010ca-5511-0410-912e-c29ae57300e0
This part is a mixture of the original patch and my changes. It seems like
tueidj had some trouble
1) getting OGG to work, which is why it's conditionally compiled out
2) struggling with endianness with the mixing routines? This may be also
due to him missing to define two others BIGENDIAN macros (our code is
in need of cleanup there). Note the change in jaudiolib/src/mix.c!
Because I added my share to this part, I might have actually broken sound
mixing on big-endian platforms.
git-svn-id: https://svn.eduke32.com/eduke32@2630 1a8010ca-5511-0410-912e-c29ae57300e0
- conditionally compiles out some code intended for the PC platforms
- compat.c: get home directory routine, access() implementation
- game.c: don't use ioctl(), lower cache1d size to 8 MiB, Wii-specific
initialization code and application directory ("apps/eduke32")
git-svn-id: https://svn.eduke32.com/eduke32@2628 1a8010ca-5511-0410-912e-c29ae57300e0
This simply macro-defines various low-level networking functions.
git-svn-id: https://svn.eduke32.com/eduke32@2627 1a8010ca-5511-0410-912e-c29ae57300e0
- the crosshair is displayed at the position read from the absolute pointing
device
- in the menus, use the hat input (that was mapped to mouse buttons in part 4)
for navigation
git-svn-id: https://svn.eduke32.com/eduke32@2625 1a8010ca-5511-0410-912e-c29ae57300e0
- sdlayer.c: custom "get joystick button names" routine
- jmact/mouse.c: packs some joystick events into the value returned by
MOUSE_GetButtons(): bits used are 256, 512, 4096, 8192
- MOUSE_Init() --> Mouse_Init(), presumably because of a name clash?
- comments out right-shift of joystick analog values by 5, maybe this fixes
the scale problems with the joystick on the PC too?
git-svn-id: https://svn.eduke32.com/eduke32@2624 1a8010ca-5511-0410-912e-c29ae57300e0
I didn't add Makefile.common, because it needs to be made conditional.
git-svn-id: https://svn.eduke32.com/eduke32@2622 1a8010ca-5511-0410-912e-c29ae57300e0
Because gltexinvalidate*() could be called too often when setgamepalette is used
while having a tint overlaid else. Pending thorough analysis/reworking of the
32-bit mode base palette handling / texture invalidation.
git-svn-id: https://svn.eduke32.com/eduke32@2620 1a8010ca-5511-0410-912e-c29ae57300e0
- bump lpeg stack limit to 1024 (hack) for long if/if/if...else chains
- lexical: newline, EOF and whitespace; "bad" identifiers; hex literals,
newline terminated strings (allow empty string)
- syntax: allow nesting of array expressions, it's easier than special-casing;
handle issues with structs expecting parm2 (hackish); userdef;
switch/case/default
- fix parsing some commands; mind prefixes!
- frontend: if failing match, print last keyword and its position; warn on
"bad" identifiers (one per such); batch processing from command line
- Files that locate finds from my linux box now pass (except where there are
really syntax errors).
git-svn-id: https://svn.eduke32.com/eduke32@2616 1a8010ca-5511-0410-912e-c29ae57300e0
- 4 instances -> HandleSE31
- 4 instances -> MaybeTrainKillPlayer
- 2 instances -> MaybeTrainKillEnemies
- move a couple of variables into inner blocks and add 'const' for easier reading
In passing, fix a minor glitch where the squishing sound of an enemy that got
run over by an SE 6 or 14 car would appear to originate from the SE instead
of the enemy's last position.
git-svn-id: https://svn.eduke32.com/eduke32@2607 1a8010ca-5511-0410-912e-c29ae57300e0
Of course, it's just for the heck of it, since this setting is not saved into
MAP files. I kinda like the cylindrical projection...
git-svn-id: https://svn.eduke32.com/eduke32@2605 1a8010ca-5511-0410-912e-c29ae57300e0
This has been there since searchbottomwall introduction in r1466.
git-svn-id: https://svn.eduke32.com/eduke32@2604 1a8010ca-5511-0410-912e-c29ae57300e0
Currently syntax only. Parses the original scandcode 0x1d files, which is
harder than you'd imagine given the relatively simple structure. Chokes on
new-gen custom stuff.
git-svn-id: https://svn.eduke32.com/eduke32@2594 1a8010ca-5511-0410-912e-c29ae57300e0
If one next instruction happened to be interpreted, madness would ensue,
because the pointer wouldn't be aligned on the "opcode" part anymore.
Also, with "seti", set current sprite index only after a successful validation.
git-svn-id: https://svn.eduke32.com/eduke32@2591 1a8010ca-5511-0410-912e-c29ae57300e0
This get into the writable variable the "linking type" of the sprite with index
<spritenum>. The result is a bit field of ORed values:
1: lotag has linking semantics
2: hitag
4: extra, 8: xvel, 16: yvel, 32: zvel, 64: owner (custom only)
Custom setting about which sprites have what kind of linking can be programmed
via EVENT_LINKTAGS: it receives a sprite index as the 'current sprite' and is
supposed to return the bit field in RETURN.
An example which lists sprites and their linking hi- and lotags is provided in
the state 'listusedtags' in a.m32.
git-svn-id: https://svn.eduke32.com/eduke32@2590 1a8010ca-5511-0410-912e-c29ae57300e0
- factor out many identical checks in a convenient function; some messages
may read slightly differently now and tile ranges may be handled more strictly
(error out if one of the limits is invalid)
- factor out two instances of identical (up to one arg) code into
tile_from_truecolpic
- factor out setting picsiz[] and stuff into set_picsizanm
- some checks
- Make "undefmodelof" non-functional and warn.
- in "animtilerange", if the tile difference is >= 64, error out since we
can't store it in picanm[]
git-svn-id: https://svn.eduke32.com/eduke32@2588 1a8010ca-5511-0410-912e-c29ae57300e0
This was more or less done by trial and error rather than understanding what
exactly is going on there. In any case, the code for all the different ending
scenes ought to be factored out instead of being duplicated with subtle
differences every time.
git-svn-id: https://svn.eduke32.com/eduke32@2585 1a8010ca-5511-0410-912e-c29ae57300e0
This is so that when hud_bgstretch is disabled (i.e. background pictures are
not stretched to the whole screen), the frame buffer has no leftover contents
from previous frames on the sides of the screen. This was particularly noticable
when using the console.
The "places" are the following:
- before drawing an anim frame
- before drawing a "full-screen" background
- while displaying logo, titlescreen, loadscreen
(this leaves a couple others which I didn't test, and didn't tweak)
git-svn-id: https://svn.eduke32.com/eduke32@2584 1a8010ca-5511-0410-912e-c29ae57300e0
Also, do a setpalettefade(..., end) when breaking fadepaltile now, too.
git-svn-id: https://svn.eduke32.com/eduke32@2583 1a8010ca-5511-0410-912e-c29ae57300e0
When requesting an increasing ramp, the upper limit is taken to be exclusive.
When it is passed to G_FadePalette, only the lowest 6 bits are passed further
to setpalettefade, which means that a limit of 64 is incorrectly set as 0.
Also, when breaking from the fade loop, set the fade value to the end one for
fadepal!
git-svn-id: https://svn.eduke32.com/eduke32@2582 1a8010ca-5511-0410-912e-c29ae57300e0
This requires one tweak in drawrooms' umost/dmost setup to prevent oob access.
Specifically, a coordinate difference of 0 is allowed. In the classic renderer,
this would mean a one-pixel (real screen coords) height or width. In Polymost,
it would currently mean a one-pixel height and zero-pixel width, but this might
be subject to change.
git-svn-id: https://svn.eduke32.com/eduke32@2574 1a8010ca-5511-0410-912e-c29ae57300e0
The showview command transforms the 320-based screen bound coordinates to the real
screen bounds like xreal = (x*xdim)/320, which shows a bias towards zero: for
example, for a 1680 screen width, the maximum permissible value 319 is mapped to
round_to_zero((319*1680)/320) == 1674. (The rounding is implicit in the integer
division). This makes it impossible for a view to cover the whole screen with any
other resolution than 320x200. The new command transforms the bounds like
xreal = (x*(xdim-1))/319, which would map 319 to 1679 in the preceding example.
git-svn-id: https://svn.eduke32.com/eduke32@2573 1a8010ca-5511-0410-912e-c29ae57300e0
Also,
- use this in game.c and astub.c palookup loading code
- when makepalookup() is passed a 0 palnum, return early. This means that
'fogpal' will silently fail when attempting to change pal 0.
- in 'makepalookup' DEF command, error out if passed a pal of 0.
git-svn-id: https://svn.eduke32.com/eduke32@2569 1a8010ca-5511-0410-912e-c29ae57300e0
Instead of drawing the rooms and masks with the classic renderer once.
The captured scene is transformed to use the base palette, so that the
screenshot will also show up in classic. No aspect correction is done.
git-svn-id: https://svn.eduke32.com/eduke32@2567 1a8010ca-5511-0410-912e-c29ae57300e0
The primary change is that things have been made memory-clean. Some of these
pointers may point to wildly different places during the course of the program
such as statically or dynamically allocated storage, the buffer returned by
getenv() (which must not be modified according to the docs), or an element of
argv[]. Consequently, we need to strdup, or better, dup_filename them if they
are ever to be passed to a function that modifies their pointed-to data.
Specifically:
- added statics or consts according to usage
- 3 new functions clear{Grp,Def,Script}NamePtr, only 'Def' one extern for now
- in G_CheckCommandLine, don't strip 'const'; use Bstrncpyz where appropriate
- remove multiple declarations
Also, warn if an application parameter has been ignored (not matched).
git-svn-id: https://svn.eduke32.com/eduke32@2561 1a8010ca-5511-0410-912e-c29ae57300e0
It allocates a buffer of size BMAX_PATH and copies the passed string into it.
git-svn-id: https://svn.eduke32.com/eduke32@2560 1a8010ca-5511-0410-912e-c29ae57300e0
This additionally fixes leaks that were caused by traversing the file name
list with the 'findfiles' pointer and not clearing them afterwards (even if
there was a handle to the list head via 'findfileshigh').
git-svn-id: https://svn.eduke32.com/eduke32@2557 1a8010ca-5511-0410-912e-c29ae57300e0
Don't actually replace the instances in the code now.
Additions in common.h:
- fnlist_t, which combines CACHE1D_FIND_REC *finddirs, *findfiles and
int32_t numdirs, numfiles
- the FNLIST_INITIALIZER macro, which MUST be used for automatic variables
- fnlist_clearnames, fnlist_getnames functions
- G_LoadGroupsInDir, G_DoAutoload, two often-occurring uses of these
git-svn-id: https://svn.eduke32.com/eduke32@2555 1a8010ca-5511-0410-912e-c29ae57300e0
Alongside, these make into into the header:
- the 'tokenlist' type (a typedef'd struct)
- the T_EOF and T_ERROR enumeration values
git-svn-id: https://svn.eduke32.com/eduke32@2549 1a8010ca-5511-0410-912e-c29ae57300e0
As inauguration, move G_AddGroup, G_AddPath and struct strllist there.
The header is located in build/include, because in the future, code that resides
closer to (but is not strictly part of) the engine might need to be factored
into here. The source file, however, is in the source/ directory.
git-svn-id: https://svn.eduke32.com/eduke32@2542 1a8010ca-5511-0410-912e-c29ae57300e0
- Help window text cleaned and made more consistent between game and editor
- Added help entry for "-clipmap"
- Log text for using CON, DEF, and RTS files has been made consistent
- All instances of '%s' have been replaced with \"%s\" because ' is a valid filename character. (At least on Windows.)
git-svn-id: https://svn.eduke32.com/eduke32@2538 1a8010ca-5511-0410-912e-c29ae57300e0
There are instances where oob picnums may propagate to that function, so
protect it. The digitanumber[z] bound check is actually made more permissive,
but could also just as well be removed now.
git-svn-id: https://svn.eduke32.com/eduke32@2533 1a8010ca-5511-0410-912e-c29ae57300e0
The code in the editor was potentially doing a strcat on a strdup'd string.
Also, rename AddGamePath to G_AddPath in astub.c and add CODEDUP markers
because shared stuff like this ought to be factored out into a separate
source file some time.
git-svn-id: https://svn.eduke32.com/eduke32@2531 1a8010ca-5511-0410-912e-c29ae57300e0
Skill names are defined via 'defineskillname' as before, but the index
of the last non-empty skill name (plus one) is taken as the skill count.
So, if you only define the 6th, there will be no effect.
Note that currently, there is no way to specify less than four skills
because the CON parser doesn't allow the empty string for the name (it'll
go beyond the line) and because the default skill names are initialized in
EDuke32 too, in addition to the CONs.
git-svn-id: https://svn.eduke32.com/eduke32@2530 1a8010ca-5511-0410-912e-c29ae57300e0
The nofloorpalrange beginning and end indices are silently clamped to 1 .. 255.
git-svn-id: https://svn.eduke32.com/eduke32@2524 1a8010ca-5511-0410-912e-c29ae57300e0
- Properly handle the architecture definition when BUILD32_ON_64=1
- Add proper $(*LDFLAGS) to which LTO and ARCH are correctly passed.
- Cleanup of compiler flag variables.
This should fix to some degree building of the Build tools on OS X, and it may possibly fix the crashing of the OS X x86 32-bit build.
git-svn-id: https://svn.eduke32.com/eduke32@2520 1a8010ca-5511-0410-912e-c29ae57300e0
It has always annoyed me how floors with "shirt-color" type palookups like 21
affected the color of its containing sprites and HUD-drawn stuff. This commit
allows one to specify an inclusive range of pals for which this should be
disabled for sprites (but not for HUD stuff, yet).
git-svn-id: https://svn.eduke32.com/eduke32@2517 1a8010ca-5511-0410-912e-c29ae57300e0
- replace bit tweaking for big endian archs with clear code
- allow palette lookups >= 128, previously we read into a signed byte
git-svn-id: https://svn.eduke32.com/eduke32@2503 1a8010ca-5511-0410-912e-c29ae57300e0
- in Mapster, pre-form the default 10 clip map names before returning from
G_CheckCommandLine() so it gets loaded even if we passed no cmdline args.
- malloc + strlen + strcpy --> strdup
- don't need to spank dead variables ;)
- we may call calloc with zero size, which isn't bad by itself, but asserting
for non-null afterwards is. Allocs of 0 are implementation-defined, and may
well return a null pointer (C99 7.20.3).
git-svn-id: https://svn.eduke32.com/eduke32@2502 1a8010ca-5511-0410-912e-c29ae57300e0
Also, a very minor change in the con/def module code. (int --> int32_t)
git-svn-id: https://svn.eduke32.com/eduke32@2495 1a8010ca-5511-0410-912e-c29ae57300e0
A run of consecutive mapstates may share sector/wall/sprite blocks, but
the code was deciding whether to free them solely on local properties.
Now, save a reference count at the beginning of each such allocated block
and free it only if it reaches zero.
git-svn-id: https://svn.eduke32.com/eduke32@2492 1a8010ca-5511-0410-912e-c29ae57300e0
Also, always print at least level 5 corruptions (that is, have no instances
of completely silent corruptcheck).
git-svn-id: https://svn.eduke32.com/eduke32@2490 1a8010ca-5511-0410-912e-c29ae57300e0
This checks for about every possible type of sprite list corruption and
reports back with a corruption level 5 if one of the 14 validations fail.
git-svn-id: https://svn.eduke32.com/eduke32@2489 1a8010ca-5511-0410-912e-c29ae57300e0
- start scrolling from about half of the visible page
- PGUP/DGDN moves the cursor by 1/4 of the page
- code cleanup (we only need one displine[80], use clearkeys())
git-svn-id: https://svn.eduke32.com/eduke32@2488 1a8010ca-5511-0410-912e-c29ae57300e0
Note the capitalization. I hope that this makes clashes with user variable
names less likely.
git-svn-id: https://svn.eduke32.com/eduke32@2484 1a8010ca-5511-0410-912e-c29ae57300e0
Also include one comment about a currently failing assertion there.
git-svn-id: https://svn.eduke32.com/eduke32@2482 1a8010ca-5511-0410-912e-c29ae57300e0
New engine variable 'int32_t Numsprites', not yet saved into savegames
or mapstates. (The capitalization is to distinguish it from the often-used
'numsprites' locals or structure member names.
In the editor, get rid of updatenumsprites().
git-svn-id: https://svn.eduke32.com/eduke32@2478 1a8010ca-5511-0410-912e-c29ae57300e0
The major outside-visible change is that this fixes the sound cutoff bugs that
happened because newly-spawned sprites took the place of those whose sounds
had not yet finished playing.
Besides, there are these changes:
- remove deletesprite{sect,stat}
- we have a new engine variable 'tailspritefree' that keeps track of the
sprite freelist tail
- we need to store it in savegames and mapstates, so bump the savegame
minor version
git-svn-id: https://svn.eduke32.com/eduke32@2470 1a8010ca-5511-0410-912e-c29ae57300e0
- JFBuild ports: arttool, givedepth, and mkpalette
- All viable tools are now built when 'make utils' is invoked, not just some
- Revert "initprintf" hack of previous commit and replace it with "compat_tools.c"
- Move Bstrtolower from baselayer.c to compat.c
- Makefiles: Add start and finish messages for the tools
- Makefiles: To prevent "-Wimplicit" from being passed to the C++ compiler, create $(*CONLYFLAGS)
git-svn-id: https://svn.eduke32.com/eduke32@2458 1a8010ca-5511-0410-912e-c29ae57300e0
This might now be even more confusing for users reading both the source
and CON code (where the access is necessarily still via '.clipping'),
but at least reading the source now makes sense :P
git-svn-id: https://svn.eduke32.com/eduke32@2454 1a8010ca-5511-0410-912e-c29ae57300e0
This is so that in the event of a crash, no CON dump will be printed if no
(actor or loadactor) CON code was actually executing at the time of the
crash, confusing the users. Note: doesn't apply for event code.
git-svn-id: https://svn.eduke32.com/eduke32@2453 1a8010ca-5511-0410-912e-c29ae57300e0
We've been running with same-sized actor_t for a while without problems now.
In the unlikely event (famous last words) that an issue should pop up later,
this revision should be consulted for the differences between the two versions.
git-svn-id: https://svn.eduke32.com/eduke32@2451 1a8010ca-5511-0410-912e-c29ae57300e0
The format is
snd #<sound number>
inst <instance of that sound>:
voice <internal voice handle>,
ow <owner's sprite ID/-1> (this is the interesting part)
git-svn-id: https://svn.eduke32.com/eduke32@2441 1a8010ca-5511-0410-912e-c29ae57300e0
- make a couple variables static in sounds_mapster32.c
- KHz --> Hz in initialization text
git-svn-id: https://svn.eduke32.com/eduke32@2439 1a8010ca-5511-0410-912e-c29ae57300e0
added: sector extra; viewingrange and yxaspect before the main drawrooms call
removed: randomseed
git-svn-id: https://svn.eduke32.com/eduke32@2413 1a8010ca-5511-0410-912e-c29ae57300e0
It needs to have the sound quality box removed and the Game directory box added, possibly among other things.
git-svn-id: https://svn.eduke32.com/eduke32@2396 1a8010ca-5511-0410-912e-c29ae57300e0
The replacement of atoi with strtol in r2374 had the side-effect that numbers
out of the range of a 32-bit integer were being returned as LONG_MAX/LONG_MIN
instead of being converted by taking the bits and re-interpreting them (note
that it was a coincidence that atoi behaved that way; to be strict, the
behavior was undefined and there is no regression).
Now, we implement parsing decimal integers using strtoll (with assuming
"long long" being the same as int64_t) and check in which range the number
falls. If it's in the range (INT32_MAX <= x <= UINT32_MAX), issue a warning;
if it's not in (INT32_MIN <= x <= UINT32_MAX), warn too (though this better
ought to be an error?). In each case, the bit representation is converted to
the CON number type (int32 to assume maximum portability) by re-interpreting
the bits [this is the same as an int/int cast, with GCC at least; more
generally, it's implementation-defined per C99].
git-svn-id: https://svn.eduke32.com/eduke32@2392 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes mirrors consisting of more than one walls not drawing when the
first assigned mirror wall breaks. It still does not let you have more
than one mirror (i.e. mirror sectors) showing up at the same time in
the scene. Affects classic and Polymost only.
git-svn-id: https://svn.eduke32.com/eduke32@2387 1a8010ca-5511-0410-912e-c29ae57300e0
This was causing oob sector accesses with code like this:
getwall[hitwall].nextsector temp
ifvarvare sector[temp].floorz sector[temp].ceilingz setvar tempb 1
(from DT's HYPERCORE).
Also validate quote indices passed to CON's quote and userquote commands at
runtime.
git-svn-id: https://svn.eduke32.com/eduke32@2381 1a8010ca-5511-0410-912e-c29ae57300e0
Such game text was shown starting from about the center of the screen.
The reason for the bug was this code:
t += 1 + isdigit(*(t+2));
The sequence points here are at the beginning and end of this assignment
expression, and the updating of t may happen anywhere between these (C99
6.5.16 #3). Please don't write such code. When in doubt, and assignment
and reference to the same object should be split!
git-svn-id: https://svn.eduke32.com/eduke32@2380 1a8010ca-5511-0410-912e-c29ae57300e0
This plays more nicely with automatic formatters. Also indent accordingly.
git-svn-id: https://svn.eduke32.com/eduke32@2379 1a8010ca-5511-0410-912e-c29ae57300e0
Because: 1) It used to be like this; 2) guard against bad CON input.
git-svn-id: https://svn.eduke32.com/eduke32@2378 1a8010ca-5511-0410-912e-c29ae57300e0
Encountered with Scent.map. Since the SE21 are deleted after they have
been used, the search for them in the ST28 code in sector.c may come up
empty, in which case sector[-1] would be accessed.
git-svn-id: https://svn.eduke32.com/eduke32@2377 1a8010ca-5511-0410-912e-c29ae57300e0
That is, everyplace a user input is to be converted. The only remaining
instance of atoi() is now atoi(s_buildDate).
git-svn-id: https://svn.eduke32.com/eduke32@2374 1a8010ca-5511-0410-912e-c29ae57300e0
Internally, the last argument to neartag is now a pointer to a function
int32_t (*blacklist_sprite_func)(int32_t i),
which is supposed to return 1 if sprite[i] should NOT be considered for hitting.
This is now used in the hard-coded neartag() calls in sector.c, but not in any
way in CON (there's neither a C blacklist function provided, nor is there a
possibility to define one in CON). There, all sprites with picnums >=1 and <=10
(i.e. the effectors) will be blacklisted. This remedies problems where such
sprites would get in the way of switches.
Note that a whitelist approach (only consider a predefined set, namely those
picnums which will be checked afterwards) has back-compatibility implications
since people may have used e.g. lotagged window sprites to cover a switch.
Also, the >=1 to <=10 range is [sic] (the static, not dynamic values are used),
since anyone redefining effector picnums is clearly out of their mind.
git-svn-id: https://svn.eduke32.com/eduke32@2373 1a8010ca-5511-0410-912e-c29ae57300e0
I'm not getting this warning (synthesis is) but I think it's justified because
the VOC block parsing code isn't terribly validating...
git-svn-id: https://svn.eduke32.com/eduke32@2364 1a8010ca-5511-0410-912e-c29ae57300e0
The following functions have const qualifiers attached for the 'destination'
arguments: kdfwrite, dfwrite in cache1d.c and copybuf{byte,reverse,} in the
pragmas source or headers. A couple uses of the latter ones were replaced
with calls to standard library functions.
git-svn-id: https://svn.eduke32.com/eduke32@2361 1a8010ca-5511-0410-912e-c29ae57300e0
- RENDERER SETUP is now also accessible from classic, with only 2 options:
'aspect ratio' and 'ambient light level'
- remove the latter option from the VIDEO SETUP menu
- When compiled with OpenGL, the aspect ratio option cycles between 3 states:
r_usenewaspect=1 (the modern way), and r_usenewaspect=0 but r_widescreen=0/1.
In non-GL builds, there are only 2 states.
- don't display black translucent overlay in COLOR CORRECTION menu
git-svn-id: https://svn.eduke32.com/eduke32@2358 1a8010ca-5511-0410-912e-c29ae57300e0
The reason was that drawmasks(), which was where the resetting of the fake
RoR textures happened under Polymer, can be called from polymer_displayrooms()
when mirrors are present. I was assuming that drawmasks() was only ever called
after the 'main' drawrooms and that hence the sequence of fake RoR tile tweaking
was set, reset, set, reset, ... which it was not.
Now, do the resetting explicitly after every drawmasks() in the editor.
git-svn-id: https://svn.eduke32.com/eduke32@2350 1a8010ca-5511-0410-912e-c29ae57300e0
- Maintain a position relative to the start of the data. VOC doesn't
mandate an EOF marker (blocktype 0). If we go over the end, fake
that marker, so as to restart a looping sound or stop a one-shot one.
This fixes an uninitialized mem access with the corrupt SNAKRM.VOC.
- When encountering the EOF marker, don't read the 3 bytes of block size,
since they may not be there.
- Read blocksize by ORing and shifting the 3 bytes, not with *(int32_t *)...
git-svn-id: https://svn.eduke32.com/eduke32@2346 1a8010ca-5511-0410-912e-c29ae57300e0
- guard cansee() against negative sectnums (return 0 immediately), since
it's often called with the player sectnum as one argument
- in resetpspritevars(), don't inset APLAYER sprite if sectnum < 0, which
can happen if a map is started in void space accidentally (e.g. from
the editor)
- two checks before accessing sector[] with a player sectnum
git-svn-id: https://svn.eduke32.com/eduke32@2342 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes updateanimation picking up foreign (and thus potentially oob)
frame numbers at "3: c > n".
git-svn-id: https://svn.eduke32.com/eduke32@2339 1a8010ca-5511-0410-912e-c29ae57300e0
Uncomment #define DEBUG_VALGRIND_NO_SMC in duke3d.h to be able to
valgrind --smc-check=none (or the default stack-only)
with Polymost and Polymer renderers.
git-svn-id: https://svn.eduke32.com/eduke32@2337 1a8010ca-5511-0410-912e-c29ae57300e0
It was causing update issues when many tints were applied simultaneously,
like being shot and spit at by enforcers while being on rails barefeet.
Also, the GL modes were calling gltexinvalidate8() when picking up goodies
or being hurt with that change, so it needs much more thought.
git-svn-id: https://svn.eduke32.com/eduke32@2322 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes a bug in passing: 'int32_t j' was assigned to as a temporary inside
one instance of the code, but used as if it were the previous sprite index
further on. Would only happen with projectiles that "work like" both SPIT
and RPG_IMPACT.
git-svn-id: https://svn.eduke32.com/eduke32@2321 1a8010ca-5511-0410-912e-c29ae57300e0
- make PGUP/PGDN and HOME/END behave as expected across all menus
- in keyboard/mouse button mapping menu, draw function names that have been given
custom names via CON with pal 8 for easier recognition
- fix tinting of function names in mouse button mapping menu
git-svn-id: https://svn.eduke32.com/eduke32@2313 1a8010ca-5511-0410-912e-c29ae57300e0
Internally, there's a new function fade_screen_black() that implements the
fading more efficiently than calling rotatesprite for classic, and uses
tile 0 (assumed to have at least 64x32 size) in the GL modes.
The black background of the user map selector is still done with rotatesprite
and tile BLANK in every renderer.
git-svn-id: https://svn.eduke32.com/eduke32@2312 1a8010ca-5511-0410-912e-c29ae57300e0
So that the game won't exit if you write 'vidmode 4' when intending
'setrendermode 4'.
git-svn-id: https://svn.eduke32.com/eduke32@2311 1a8010ca-5511-0410-912e-c29ae57300e0
The problems still remains that rotatesprite behaves differently in classic and
OpenGL modes with clipping boundaries specified (and maybe in some other cases)
git-svn-id: https://svn.eduke32.com/eduke32@2304 1a8010ca-5511-0410-912e-c29ae57300e0
This means that when e.g. emerging from water hurt will change the
palette instantly, but because bit 16 is added to the P_SetGamePalette
call, the tinting is retained.
git-svn-id: https://svn.eduke32.com/eduke32@2303 1a8010ca-5511-0410-912e-c29ae57300e0
Of course, only when the mod/TC in question doesn't use that feature.
git-svn-id: https://svn.eduke32.com/eduke32@2301 1a8010ca-5511-0410-912e-c29ae57300e0
led out or not. Removing features that certain mods may depend on to operate correctly without throwing any kind of
error or warning at startup other than a logged message is bad.
git-svn-id: https://svn.eduke32.com/eduke32@2300 1a8010ca-5511-0410-912e-c29ae57300e0
The "double-click button4" had to make way for MOUSE5 in the button binds menu,
but I don't think anyone cares. Savegame compatibility was actually silently
broken with the MAXTILES update earlier, but I forgot updating the version...
git-svn-id: https://svn.eduke32.com/eduke32@2284 1a8010ca-5511-0410-912e-c29ae57300e0
Also a couple of other cleanup lines... might need more though, I'm not sure
it's all good there.
git-svn-id: https://svn.eduke32.com/eduke32@2278 1a8010ca-5511-0410-912e-c29ae57300e0
If enabled, this makes the following arrays be allocated statically:
spriteext, spritesmooth, sector, wall, sprite, tsprite, while
necessarily disabling the clipshape feature (because it relies on
setting sector/wall to different malloc'd block temporarily).
To compile, pass DEBUGANYWAY=1 in addition to RELEASE=0 to 'make',
and it's really only useful with CC=clang, of course.
git-svn-id: https://svn.eduke32.com/eduke32@2270 1a8010ca-5511-0410-912e-c29ae57300e0
Ideally, we would also warn when setting WEAPONx_SHOOTS to negative values, but
we'd have to intercept CON's setvar's and it wouldn't be pretty.
git-svn-id: https://svn.eduke32.com/eduke32@2268 1a8010ca-5511-0410-912e-c29ae57300e0
- fix one bound-checking line
- rewrite two lines in astub.c to potentially not overflow an int16
- make tiletovox[] an array of int16's
git-svn-id: https://svn.eduke32.com/eduke32@2266 1a8010ca-5511-0410-912e-c29ae57300e0
- 'whitecol' was defined in the engine and in build.c, use only the engine one
- make cachesize, artsize, artversion static in engine.c
- undo some formatting havoc presumably done by astyle
git-svn-id: https://svn.eduke32.com/eduke32@2260 1a8010ca-5511-0410-912e-c29ae57300e0
Since the original source code release of Duke3D, there was a potentially
dangerous hack where actor[].dispicnum was set to -4 to signal "this actor
should not have a floor shadow for this moment" (it doesn't really work,
if you ask me).
Now, use another bit of actor[].flags for that purpose because setting
any picnum members to negative values asks for trouble.
git-svn-id: https://svn.eduke32.com/eduke32@2249 1a8010ca-5511-0410-912e-c29ae57300e0
E.g. this should work correctly now:
// FLY_BY, PIPEBOMB_EXPLODE, OCTA_DYING
animsounds logo { 1 244 64 14 64 144 }
git-svn-id: https://svn.eduke32.com/eduke32@2243 1a8010ca-5511-0410-912e-c29ae57300e0
The syntax is as follows:
animsounds <anim> { frame1 sound1 frame2 sound2 ... }
<anim> has to be one of the tokens: cineov2, cineov3, RADLOGO, DUKETEAM,
logo, vol41a, vol42a, vol4e1, vol43a, vol4e2, or vol4e3, corresponding
to hard-coded Duke3D anims.
The frameN's (1-based frame numbers) have to be in ascending order (but not
necessarily strictly ascending, so that a frame may have more than one sound).
Example: for Duke3D's XBLA nuke logo animation (IVF extracted from nuke.webm),
the following definition overlays the video with a sound sequence similar
(identical save for timing) to the original nuke animation:
// frame 1: FLY_BY, frame 64: PIPEBOMB_EXPLODE
animsounds logo { 1 244 64 14 }
git-svn-id: https://svn.eduke32.com/eduke32@2242 1a8010ca-5511-0410-912e-c29ae57300e0
the loop. For the release build and the test animation, this lowers the time
to 3-4 ms per conversion of one frame on my desktop machine.
git-svn-id: https://svn.eduke32.com/eduke32@2241 1a8010ca-5511-0410-912e-c29ae57300e0
the SE ones douple, triple, ... after each save. Maphack lights are reloaded
with polymer_resetlights() (though I've had them disappearing after load, I
couldn't reproduce it afterwards).
- in debugging builds, print a message when polymer_resetlight is called on a
nonexistent one. The problem is not so much the call itself (it's guarded),
but the fact that resources on the caller side may not have been freed if it
thinks that those lights do in fact exist. Right now, it's not the case though.
- add 'loaded map hack' messages after some other successful loadmaphack calls
git-svn-id: https://svn.eduke32.com/eduke32@2236 1a8010ca-5511-0410-912e-c29ae57300e0
crashes.
Usually, after loading a game, some wall tiles are tweaked depending on whether
adult mode is enabled or not. If it's not, those wall picnums are replaced
with blank or broken screens. If it is, they are restored from the wall's
.extra member. Apparently though, Mapster32 leaves some .extra members
floating around even after deleting a TROR nextwall link (it's used as the
'lower wall index'). Because MAXWALLS is greater than MAXTILES, this may
produce out-of-bounds accesses and corrupt memory (besides setting wall
tilenums to nonsensical values) later in the game.
Other than that, the change only affects loading savegames created with adult
mode OFF. Kinky TV screenies simply won't be restored then.
git-svn-id: https://svn.eduke32.com/eduke32@2235 1a8010ca-5511-0410-912e-c29ae57300e0
check one 'if' down since mirrors are only created when the condition holds
git-svn-id: https://svn.eduke32.com/eduke32@2233 1a8010ca-5511-0410-912e-c29ae57300e0
Resetting the gamevars might produce inconsistencies between an earlier loaded
game (for example, if it was saved with different/earlier CON code), and worst
of all, the gamevars that reference C variables might be overwritten (i.e. the
addresses to those variable, which is very bad!).
git-svn-id: https://svn.eduke32.com/eduke32@2230 1a8010ca-5511-0410-912e-c29ae57300e0
certain situations (mostly cutscenes etc). This commit removes bit 1 from all
flags that make it to setbrightness, the meaning of which is "don't actually
update the palette". I have no idea what it was for and since the corresponding
P_SetGamePalette() calls were from places like the mentioned cutscenes, I don't
think it matters performance-wise.
git-svn-id: https://svn.eduke32.com/eduke32@2223 1a8010ca-5511-0410-912e-c29ae57300e0
the constants 0 and 1, and moveptrs may reference the script up to index 2
then (though I'm not sure whether the code is reachable with moveofs either
0 or 1), so make sure it's nulled instead of whatever happened to compile at
the first two positions. Move 1 is only used once in the original cons,
when frozen and being shattered.
git-svn-id: https://svn.eduke32.com/eduke32@2211 1a8010ca-5511-0410-912e-c29ae57300e0
Now we don't need to worry about the numbers running out soon.
Bump BYTEVERSION by three to celebrate this, too.
git-svn-id: https://svn.eduke32.com/eduke32@2209 1a8010ca-5511-0410-912e-c29ae57300e0
This makes savegames practically the same as the initial snapshot of a demo.
Saves are now named 'dukesavX.esv' (demos: 'edemoX.edm').
Additionally, many changes that couldn't/needn't be cleanly separated are added
with this commit:
- make spriteext_t have the same size across 32/64 bit platforms (actor_t partially)
- prevent saving/loading in MP games (it certainly didn't work and still doesn't)
- it's time we start using assertions! Define NDEBUG for releasse builds.
- reset savegame major and minor versions (we have a new magic string, so no conflict)
git-svn-id: https://svn.eduke32.com/eduke32@2207 1a8010ca-5511-0410-912e-c29ae57300e0
It was identified with the clearfrags rewriting, but not corrected.
git-svn-id: https://svn.eduke32.com/eduke32@2203 1a8010ca-5511-0410-912e-c29ae57300e0
There were two instances of nearly identical code in premap.c and savegame.c.
Also identifies a (harmless) problem with realloc'ing, we had:
if (len+1 > sizeof(MapInfo[...].musicfn))
MapInfo[...].musicfn = Brealloc(MapInfo[...].musicfn, len+1)
which reallocs almost all the time (since .musicfn is a pointer). Now we do
realloc every time...
git-svn-id: https://svn.eduke32.com/eduke32@2202 1a8010ca-5511-0410-912e-c29ae57300e0
Bmemset(..., 0, sizeof(...)) instead of clearbuf(..., MAX..., 0),
because the latter would clear only half of the data on 64-bit platforms.
git-svn-id: https://svn.eduke32.com/eduke32@2189 1a8010ca-5511-0410-912e-c29ae57300e0
some information about it instead of simply omitting it.
Internally, struct savegame --> struct savegame_ for easier grepping.
git-svn-id: https://svn.eduke32.com/eduke32@2188 1a8010ca-5511-0410-912e-c29ae57300e0
32- and 64-bit platforms. Also, make struct type actor_t also have a common
size of 128 bytes. New code currently disabled and #ifdef'd for comparison.
This requires certain t_data[] entries ([1]: move ptr, [4]: action ptr and
[5]: ai ptr with actors) to be converted to script offsets instead of pointers,
breaking savegame and net packet compatibility (we could in theory try hard not
to, but it would be too much trouble).
git-svn-id: https://svn.eduke32.com/eduke32@2185 1a8010ca-5511-0410-912e-c29ae57300e0
Actors are always moved such that _they_ clip against blocking sprites, even
if their blocking bit is clear. Setting the new bit make them not clip against
anything. The promary use of this is for decorative moving sprites that are
spawned in masses, such as rain or snow.
git-svn-id: https://svn.eduke32.com/eduke32@2184 1a8010ca-5511-0410-912e-c29ae57300e0
to negative numbers. Previously, only checks for being zero were performed,
but CON code in the wild also has WEAPONx_SPAWN -1, which would propagate to
the sprite picnum...
git-svn-id: https://svn.eduke32.com/eduke32@2180 1a8010ca-5511-0410-912e-c29ae57300e0
Usage: press the ['] (quote) modifier together with the PERIOD key.
Aligns only the immediate upper and lower neighbors of each wall that got
aligned by following point2s or nextwalls. Doesn't play well with Alt
(carry over xrepeat) yet, might need two subsequent alignment passes.
git-svn-id: https://svn.eduke32.com/eduke32@2178 1a8010ca-5511-0410-912e-c29ae57300e0
Various code checked for switch tiles in the following manner,
for (ii=0; ii<2; ii++)
switch (DynamicTileMap[sprite[i].picnum-1+ii]) { case SOME_SWITCH: ... }
which blows for picnum 0. Now, we simply disallow it.
git-svn-id: https://svn.eduke32.com/eduke32@2174 1a8010ca-5511-0410-912e-c29ae57300e0
callback 'G_Polymer_UnInit'.
- In astub.c, reset spritelightid to -1 when nulling the spritelightptr of
a sprite (no crashes observed, just precaution)
- In sdlayer.c, catch SIGILLs with our signal handler too, since illegal
instructions are what the instrumented debug builds will execute when
attempting to carry out an undefined (per C) operation.
git-svn-id: https://svn.eduke32.com/eduke32@2169 1a8010ca-5511-0410-912e-c29ae57300e0
one sector was filled and the 'clear bunch' message was displayed even if the
operation was canceled.
git-svn-id: https://svn.eduke32.com/eduke32@2153 1a8010ca-5511-0410-912e-c29ae57300e0
represents a pointer into the script for label types other than LABEL_DEFINE
instead of checking inclusion of the value in the script bounds. This
assertion was tested with WGR2 SVN.
git-svn-id: https://svn.eduke32.com/eduke32@2150 1a8010ca-5511-0410-912e-c29ae57300e0
can be caused by copying map parts from one map to another (or a new one).
The copying system is slightly broken right now....
git-svn-id: https://svn.eduke32.com/eduke32@2133 1a8010ca-5511-0410-912e-c29ae57300e0
The main change consist of adding a key press (and release) callback
whose only purpose is to be used from m32script as EVENT_KEYPRESS.
When entering that event, the RETURN variable will be set to the
keystatus code of the key, and whether it was pressed or released can
be checked by looking at keystatus[] at that code (ifholdkey and
ifhitkey do this). The purpose of this, then, is to be able to remap
keys in a more general (and complicated) fashion than is possible with
the mapster32.cfg 'remap' option. Various other additions build around
this central one:
- add an example EVENT_KEYPRESS to a.m32, among other things emulating
the keypad arrows with Alt-<normal arrows> for notebook convenience;
disabled initially
- a.m32: set 'owner' with Alt-KP2: now Alt-Shift-KP2, because of
collision with the above
- new m32script command: setkey <keycode>, setting keystatus[<keycode>]
to 1 (note: may be restricted to use in EVENT_KEYPRESS only in the
future)
- fix indexing an m32script array with a defined label, there used to
be a 'not a gamevar' error instead
- add the following constant labels for some key codes:
KEY_SCROLL, KEY_F1 .. KEY_F12
git-svn-id: https://svn.eduke32.com/eduke32@2122 1a8010ca-5511-0410-912e-c29ae57300e0
with no highlighted sectors; and when entering 3D mode, even if there are
highlighted sectors. This should have almost no effect, but I find it cleaner
that way.
- Check map for corruption every time an editing change is done. This was
accidentally disabled when commenting out the undo code (which I've yet
to debug).
git-svn-id: https://svn.eduke32.com/eduke32@2121 1a8010ca-5511-0410-912e-c29ae57300e0
of SPACE and C when in side-view mode. Now, this is accomplished by checking
directly in the overheadeditor code.
git-svn-id: https://svn.eduke32.com/eduke32@2119 1a8010ca-5511-0410-912e-c29ae57300e0
selector. This could lead to a crash when OpenGL wasn't initialized before.
git-svn-id: https://svn.eduke32.com/eduke32@2117 1a8010ca-5511-0410-912e-c29ae57300e0
(lazy_tileselector=1 in mapster32.cfg). We're drawing tiles one by one,
so glDrawBuffer(GL_FRONT_AND_BACK) is our friend.
git-svn-id: https://svn.eduke32.com/eduke32@2115 1a8010ca-5511-0410-912e-c29ae57300e0
sector c/f and moving one of them would go beyond the other side (ceilingz >
floorz), don't move any sector c/f at all. When moving only one sector in that
case, move so that ceilingz == floorz.
git-svn-id: https://svn.eduke32.com/eduke32@2112 1a8010ca-5511-0410-912e-c29ae57300e0
Now, if more than one sectors are affected, always move them by the same
amount. That is, if one of them would be sticking against the other side,
don't move the rest. Another change consists of determining the z delta
first, and only then moving the sprites by that amount. This fixes the
problem where you'd e.g. raise a 'floor door' against the ceiling, and the
effector sprites would be raised one time too much, preventing them from
being lowered the next time.
git-svn-id: https://svn.eduke32.com/eduke32@2111 1a8010ca-5511-0410-912e-c29ae57300e0
- new mapster32.cfg and OSD variable 'fixmaponsave_sprites', telling the
editor whether to 'fix' the sprite sectnums on saving and entering 3D
mode. Note that a) sprite sectnums are never fixed when 'script_expertmode'
is enabled, as before, and b) sprites that have out-of-bounds sectnums
are still fixed if a proper sector is found
- if saving and some sprite sectnums have thus been tweaked, inform the
mapper on the status line and print the changes in the OSD
- fix update issue similar to an earlier one: when 'saving as', the astub.c-
based file name is now updated too, so saving with Ctrl-S now saves into
the one save with 'save as' (and not the old one)
- don't attempt to recheck wall pointers from scratch (when saving and running
with -check) if it's a TROR map
git-svn-id: https://svn.eduke32.com/eduke32@2110 1a8010ca-5511-0410-912e-c29ae57300e0
Hopefully this fixes the periodic pausing/unpausing that a few people
have been experiencing.
Also fix build with GCC 3.
git-svn-id: https://svn.eduke32.com/eduke32@2108 1a8010ca-5511-0410-912e-c29ae57300e0
with RAND_MAX > 32767 (everything except Windows?). The 'displayrand' command
now returns values from 0 to 32767 inclusive, across all platforms.
git-svn-id: https://svn.eduke32.com/eduke32@2105 1a8010ca-5511-0410-912e-c29ae57300e0
setactorsoundpitch <actor#> <sound#> <pitchoffset>
which can be used to change the pitch of a playing sound.
The pitch offset has the same meaning as the definesound pitch range endpoints,
i.e. the units are 1/100th of a seminote. Note that just like the random pitch
offset, increasing the pitch makes the sound duration shorter (and vice versa).
git-svn-id: https://svn.eduke32.com/eduke32@2104 1a8010ca-5511-0410-912e-c29ae57300e0
member, so maybe not *that* bad) and an invalid memory access when trying to
access a per-player gamevar in a player-less context (e.g. WGR2 SVN r25
WGR2GAME.CON line 10448).
git-svn-id: https://svn.eduke32.com/eduke32@2102 1a8010ca-5511-0410-912e-c29ae57300e0
playback functions. Without these, there would be an uninitialized access
in line 444 of multivoc.c (if the memory in question was allocated with malloc,
but still...)
git-svn-id: https://svn.eduke32.com/eduke32@2101 1a8010ca-5511-0410-912e-c29ae57300e0
and some VoiceNode struct members with a const, commit forgotten vorbis.c
changes.
git-svn-id: https://svn.eduke32.com/eduke32@2100 1a8010ca-5511-0410-912e-c29ae57300e0
last one + this one:
A couple of tweaks against accidental overwriting of maps.
- first, fix a bug where the map name wasn't reset to 'newboard.map' when starting a
new map
- When saving with Ctrl-S, query the user for confirmation and also show the file name
where the map will be written
- when going into the ESC-menu, print the file name where the map will be written
on pressing 'S' above the '(S)ave' text
git-svn-id: https://svn.eduke32.com/eduke32@2096 1a8010ca-5511-0410-912e-c29ae57300e0
Keep in mind that MUSICANDSFXs with ambient sounds must still have lotags
less than 999 because values >=1000 are used for the amount of reverb.
(999 can't be used because the original code reads '< 999' and I'm not
sure whether it has any special significance... probably not though)
git-svn-id: https://svn.eduke32.com/eduke32@2093 1a8010ca-5511-0410-912e-c29ae57300e0
overheadeditor() by allocating temp variables in the blocks where they
are needed.
git-svn-id: https://svn.eduke32.com/eduke32@2088 1a8010ca-5511-0410-912e-c29ae57300e0
- fix arg checking in checkdefs.sh
- some tilenum and quote ID validation in the CON interpreter
- G_DrawDigiNum and friends: eliminate redundant strlen calls
git-svn-id: https://svn.eduke32.com/eduke32@2086 1a8010ca-5511-0410-912e-c29ae57300e0
add it to the 'all' target instead
source/midi.c: eliminate one 'variable set but not used' warning
git-svn-id: https://svn.eduke32.com/eduke32@2084 1a8010ca-5511-0410-912e-c29ae57300e0
fashion. Among other things, this makes the FOV widening when shrunk
work. User CON code should always check the initial viewingrange value
when attempting to do FOV effects like zoom, because it is not guaranteed
to be 65536 due to different screen aspect ratios etc.
git-svn-id: https://svn.eduke32.com/eduke32@2078 1a8010ca-5511-0410-912e-c29ae57300e0
First, when pressing 'S on signed members (like the shade), display
the real signed value instead of the value cast to an unsigned type.
Second, when aiming at an overwall and pressing G, affect the overwall
instead of the wall. Maybe these changes affect a few other queries too...
git-svn-id: https://svn.eduke32.com/eduke32@2077 1a8010ca-5511-0410-912e-c29ae57300e0
ceilings or floors. In such cases, you're not squished unconditionally (instead
of fetching the ceiling or floor height of the neighbor sector), but TROR isn't
meant for small-scale RoR anyway.
git-svn-id: https://svn.eduke32.com/eduke32@2071 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes a crash when loading a map afterwards.
Tweak a few debugging messages and some whitespace.
git-svn-id: https://svn.eduke32.com/eduke32@2068 1a8010ca-5511-0410-912e-c29ae57300e0
My choice of solution is simply to add an extra set of values duplicating the previous five because doing so would definitely show the user no changes. I could have tinkered with the messy loop where the out-of-bounds references are made but there is no guarantee I could have succeeded or kept compatibility.
git-svn-id: https://svn.eduke32.com/eduke32@2061 1a8010ca-5511-0410-912e-c29ae57300e0
Polymer has a hack that snaps horiz values of spotlights between 90 and 110
to 90 and 110 to avoid triggering aliasing artifacts with perfectly horizontal
spotlights. Propagate that change all the way to the spotlight SE sprite so
that the code won't think that the horiz is always different from the light
and mark it invalid each frame.
git-svn-id: https://svn.eduke32.com/eduke32@2057 1a8010ca-5511-0410-912e-c29ae57300e0
First, if we're in Polymer, don't precache tinted tiles that have a highpal
for that certain pal. Second, don't precache tiles for palnum 251 (the last
non-reserved one, which is used as a crosshair pal). Assuming that there are
no other tints, this cuts the initial precache time and cache size on disk in
half.
git-svn-id: https://svn.eduke32.com/eduke32@2045 1a8010ca-5511-0410-912e-c29ae57300e0
three individual loops and compile the enclosing function at -O3 (-O1 for
debugging builds). Now, the time for this conversion ranges from 7 to 18
ms per frame across various tested machines, a clear improvement.
git-svn-id: https://svn.eduke32.com/eduke32@2042 1a8010ca-5511-0410-912e-c29ae57300e0
- when pasting to walls or maskwalls, the following user bits are kept now:
4 (top/bottom alignment [O])
1+64 (blocking, hitscan)
8+256 (x/y-flip)
- print '(one-sided)' when pressing Shift + ([B] or [H]) on a wall
git-svn-id: https://svn.eduke32.com/eduke32@2033 1a8010ca-5511-0410-912e-c29ae57300e0
is picked" but still not perfect. In particular, sometimes a wrong wall is
selected, and sprites don't get picked through portals. As a rule of thumb,
don't be too far away from the objects you're modifying in 3D mode.
git-svn-id: https://svn.eduke32.com/eduke32@2030 1a8010ca-5511-0410-912e-c29ae57300e0
before, and additionally a mode that doesn't clip against masked walls
and sprites.
git-svn-id: https://svn.eduke32.com/eduke32@2028 1a8010ca-5511-0410-912e-c29ae57300e0
the additional rendering pass
- Remove r_preview_mouseaim cvar from the game, since it's only for Mapster
- sdlmusic.c: (Failed) attempt to fix a call of waitpid() with a non-existent
process ID in the external MIDI playing code. I think there's a race there...
git-svn-id: https://svn.eduke32.com/eduke32@2025 1a8010ca-5511-0410-912e-c29ae57300e0
always like this now:
ExtUninit -> (writesetup, misc.)
uninitengine -> (uninitsystem -> (uninit timers, mouse, ...))
exit()
Some paths still lead to a plain exit(), like failures in cache1d.c or mdsprite.c
git-svn-id: https://svn.eduke32.com/eduke32@2022 1a8010ca-5511-0410-912e-c29ae57300e0
in any renderer because it's drawn with the software one...
Also add a hack to make Polymer realize that viewscreen tiles can change
each tic so that they don't show a static image anymore.
git-svn-id: https://svn.eduke32.com/eduke32@2021 1a8010ca-5511-0410-912e-c29ae57300e0
handled could lead to a bunch whose floors and ceilings covered different
areas. A fix for the reduced functionality arising from this change is
underway.
- Rewrite a small portion of code using yax_vnextsec() in game.c.
git-svn-id: https://svn.eduke32.com/eduke32@2019 1a8010ca-5511-0410-912e-c29ae57300e0
This will prevent it from calling gltexinvalidateall() when e.g. submerging
and resurfacing, mimicking the behavior of the game, where only
gltexinvalidate8() is called in such situations.
git-svn-id: https://svn.eduke32.com/eduke32@2013 1a8010ca-5511-0410-912e-c29ae57300e0
with 'corruptcheck now', but still print each corrected one on tryfix.
git-svn-id: https://svn.eduke32.com/eduke32@2012 1a8010ca-5511-0410-912e-c29ae57300e0
whenever we change to another renderer etc. and define it for the game and
editor. The purpose of the function is to clean up references to Polymer
resources like lights.
This fixes 1) all lights becoming spot lights in the game and 2)
an issue with maphack lights in the editor (can't recall which exactly).
git-svn-id: https://svn.eduke32.com/eduke32@2006 1a8010ca-5511-0410-912e-c29ae57300e0
Specifically, now also consider the sprite tile's yoffset, and fix an
issue when a tsprite got duplicated 'toward' the viewer. Also add a
couple of tests in trueror1.map.
git-svn-id: https://svn.eduke32.com/eduke32@2004 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the latter also correct when testing a map from the editor.
git-svn-id: https://svn.eduke32.com/eduke32@2001 1a8010ca-5511-0410-912e-c29ae57300e0
With script_expertmode enabled, SHIFT-BACKSPACE clears the upwall link and CTRL-
BACKSPACE the downwall link. These functions are useful because the automatic
nextwall determination code sometimes gets it wrong (not corrupting anything) or
if you want to vertically displace a sector attached to a higher or lower level.
Also add the exploding ceiling example to the TROR test map.
git-svn-id: https://svn.eduke32.com/eduke32@1997 1a8010ca-5511-0410-912e-c29ae57300e0
TROR portals that works with a little help from updatesectorz() (change not visible
from CON code). Relies only on the presence of an extension whose portal isn't
blocked and also plays nicely with corner cases like being shrunk and enabling
the jetpack. This should fix the upward moving platforms in WGR2.
git-svn-id: https://svn.eduke32.com/eduke32@1996 1a8010ca-5511-0410-912e-c29ae57300e0
on the command-line isn't found (instead of saying nothing)
* editor: Move inconsistent (stat&2)/heinum detection into the corruption
checker. This makes a lot of original maps spew countless 'errors', but
it's preferable for new maps since such floors and ceilings could behave
strangely with TROR.
git-svn-id: https://svn.eduke32.com/eduke32@1995 1a8010ca-5511-0410-912e-c29ae57300e0
- fix an earlier 'oops': make highpals load correctly again
- maphack lights shouldn't be double-loaded now
- slight tweak to the loading screen fadein/out timing
- two bound checks
- make some variables static in engine.c
git-svn-id: https://svn.eduke32.com/eduke32@1969 1a8010ca-5511-0410-912e-c29ae57300e0
which switches have been hidden in the original and user maps. One is to make
it face a wall, and another is to 'embed' it in e.g. the floor, like the
monitor with the burning fuse in E4L1. Both kinds show up when the switches
are rendered as models, revealing the secrets that the mapper sought to hide.
My proposal, implemented in this commit, is to apply a heuristic for such
switches at premap and make them invisible (set cstat bit 32768). The
conditions are re-checked during the game in case there is a switch coming
out of the floor, for example. A new spriteext bit is used for this feature.
git-svn-id: https://svn.eduke32.com/eduke32@1968 1a8010ca-5511-0410-912e-c29ae57300e0
The two bugs are:
- RPG projectiles don't pass through water
- can't emerge from slime in bobsp2
* Coalesce Polymer lights that are at the same position for FIRE-like sprites so that only one light is actually generated. This is good for usermaps that have multi-sprite fires, like bobsp2 again.
git-svn-id: https://svn.eduke32.com/eduke32@1967 1a8010ca-5511-0410-912e-c29ae57300e0
* fix 'squishing' when taking off shrunk (the reason was TROR game code using updatesectorz) and a potential sector[-1] access
git-svn-id: https://svn.eduke32.com/eduke32@1960 1a8010ca-5511-0410-912e-c29ae57300e0
by using setspritez() instead of setsprite() for the sectnum updating.
* Change 'yax-nextwall(0/1)' to 'upwall/downwall' in the corruption checker, makes it much nicer to read.
git-svn-id: https://svn.eduke32.com/eduke32@1959 1a8010ca-5511-0410-912e-c29ae57300e0
* make Ctrl-Alt-A (formerly 'toggle inner gray walls') now remove all gray walls entirely in 2d mode
* make r_usenewaspect enabled by default
git-svn-id: https://svn.eduke32.com/eduke32@1957 1a8010ca-5511-0410-912e-c29ae57300e0
* fix breaking out of 'switch' blocks and compilation of the 'default' case
* Have a way of assigning 'special function' menu [' F] entries to script states. Writing a string literal after the state name will register the state under that name. Menu names are limited to 24 characters and it's possible to have up to 16 of them.
* new branching command 'ifinteractive', true if a state runs from the menu mentioned above.
* new command: getnumberfromuser <<retvar>> "query_string" <maxnum> <flags>
See 'state collect_teleporting_sectors' in a.m32 for a combined usage of the new functionality.
git-svn-id: https://svn.eduke32.com/eduke32@1955 1a8010ca-5511-0410-912e-c29ae57300e0
* helper feature: when shade preview is enabled, the ceilings and floors of highlighted sectors are shown in pal 6. This makes it possible to highlight the TROR-joining candidate sectors in 3D mode using e.g. 'sethighlightsector searchsector 1' while aiming at the respective ceilings and floors, and get visual feedback.
* when failing TROR-joining early ('no consistent joining combinations found'), print to the console why it failed.
* more Makefile.deps updating
git-svn-id: https://svn.eduke32.com/eduke32@1952 1a8010ca-5511-0410-912e-c29ae57300e0
* New shade/visibility calculation code, which is activated with 'r_usenewshading' (on by default), and is closer to the classic look. Also tweak the FOGSCALE macro to have approximately the same fog distance with all renderers.
* Mapster32: END modifier to RShift. If it's pressed when RShift is released, sprites which are in grayed out sectors are also selected; Make changing shade affect all highlighted sprites in 3D mode (when aiming at one of them).
* some debug code to watch out for suspicious glGenTexture/glDeleteTextures calls, not active.
git-svn-id: https://svn.eduke32.com/eduke32@1943 1a8010ca-5511-0410-912e-c29ae57300e0
First, it is now possible to disable the memcache (which is there to cache the texcache) by setting the new cvar 'r_memcache' to 0. Do this if you're constrained on memory or getting crashes when e.g. doing vidrestart often. Also, the memcache will disable itself (and free its storage, if it's there) the first time it fails to allocate.
Fix a strcpy with identical arguments in game.c and a couple of uninitialized mem accesses related to Polymer lights.
git-svn-id: https://svn.eduke32.com/eduke32@1941 1a8010ca-5511-0410-912e-c29ae57300e0
The main feature is the addition of -mx and -mh command-line parameters to EDuke32 and Mapster32. These parameters include a con and def "module" respectively. This translates into essentially including the file from the bottom of the compiled script.
I fixed the classic buggy behavior of the BROKEHYDROPLANT and REACTOR2 sprites.
I also fixed a small, long-standing bug where FRAMEEFFECT1 blurs are not affected by sector floorpal. You can see one example of this by shrinking the Enforcer on the upper inside of the toppled building in E3L11: Freeway.
I tweaked the Makefile so that it would automatically regenerate the keep.me files in the $(OBJ) and $(EOBJ) directories after they are deleted for cleaning.
One final change is a slight positioning cleanup of both programs' --help dialog boxes.
git-svn-id: https://svn.eduke32.com/eduke32@1937 1a8010ca-5511-0410-912e-c29ae57300e0
