* Remove joystick scaling from `CONTROL_GetInput()`.
* Store turnspeed as constant at top of `processMovement()` and use it for joystick yaw/pitch scaling. This adds the advantage of having the out-of-box turning speed match the keyboard's turn speed and also attenuates when the player is not running.
* When interpolating on the initial setup, when binangle reached an overflow point when going lower than zero, the engine was spinning the player around clockwise to the new angle (2047, for instance).
* Interpolating after casting as uint64_t with a workflow similar to the original games, the issue went away.
* Cleaned up other interpolation functions to be of a consistent workflow.
* Scale keyboard input turning down to degree speeds.
* Uplift some remaining Q16.16 code in `applylook()` to full BAM precision.
* Move static calculations of aim and look speeds for `sethorizon()` back into function since GameTicRate isn't set right before calculation is done.
* Simplify the angle target setup back to a basic value like before.
* Repair SW interpolation issues of weapon sprite drawer when rotating left/right.
* Fix SW death horizon constant values following change of horizon center to 0.
* Struct made up of binangle class units.
* Create signed clone of binangle for use with look_ang and rotscrnang.
* Append currently outgoing function names with `2` at the end to avoid conflict.
* Started with the most complicated game first.
* Struct made up of fixedhoriz class units.
* Append currently outgoing function names with `2` at the end to avoid conflict.
* Determined maximum horizon able to be handed by engine in Q16.16 format is 280039127.
* Re-did pitch math to work on this known maximum and standardised pitch around -90/90 degrees as it should be.
* Because pitch is now -90/90 and not ~-188/188, m_sensitivity_y probably requires re-scaling.
* Blood had this right. It makes sense that the horizon be based around as it's easier to work with.
* Removed all associated game math to deduct default horizon of 100 when doing weapon zvel etc, meaning actual horizon can just be used.
* Re-did return to center function to work on the already converted pitch. Return speed should be 1:1 with previous code.
This time there were 3 additional texts and the notify display, though, except for multiplayer content that wasn't touched yet.
The result is the same: No need to extend the tiny font with international characters
This essentially removes the tiny font which is simply too small to ever be able to receive a proper international extension from the equation for localization because the level name display was the only remaining relevant content using this font.
The only other screen where this font is still being used to draw text requiring translated content is the multiplayer summary which will have to be redesigned anyway if multiplayer becomes functional again.
* Reduce `hidInput->mouseturny` to previous scaling (0.25 of incoming input).
* Change `hidInput->mouseturnx` to be 0.5 of incoming input (33% slower than b57e13ff62, but matches what other ports by providing a 2:1 scale).
* Remove further divisions beyond m_side and m_forward and adjust code in `processMovement()` accordingly.
* Change scaling for `mousevelscale` in `processMovement()` to be 1/160th of keymove. Slightly lower for Duke and a lot faster for Blood where it's needed.
Apparently this is needed by some hires packs to fudge the sprite offsets.
Fortunately, setting sprite offsets is the only thing this was ever used for so it's relatively uninvasive.
This is needed to extend a few fields that are too narrow - e.g. the texture offset fields have no room for interpolating scrolling textures.
Blood not done yet, will also need to be changed to get rid of the limits.
* Duke/RR: Fix `SB_CENTERVIEW` not clearing while `cl_syncinput 1`.
* Duke/RR: Remove superfluous call to `apply_seasick()`.
* RR: Change two calls from `playerSetAngle()` to `playerAddAngle()` Updated version of `playerSetAngle()` doesn't stop setting angle until target is reached, a bit too strict for this and compromised vehicle turning.
* `applylook()`: Remove dead flag. Was only used with Duke, no other game called the function when dead anyway. Since the input helpers are processed outside of `applylook()` now this is not needed.
* `applylook()`: Extend function with a bit of commentary.
* For Blood/SW, exposes `SB_LOOK_LEFT`/`SB_LOOK_RIGHT` to games, hooking up `q16look_ang` and `q16rotscrnang` within.
* For SW, use Duke & Blood's return to center function and remove `PF_TURN_180` bit.
* For RR, replace a few misused bits with some bools inside of `player_struct`.
* Since bulk of functionality is sourced from Duke (30Hz), apply proper scaling so SW speed matches (40Hz).
This is for consistency, otherwise sprites with a palette translation would stand out. Also use shade dependent fog density instead of a single global value.
Currently this only has an effect in true color rendering mode.
* For Duke/SW, we continually apply `SB_CENTERVIEW` only if it was previously a toggled action, similar to Blood.
* For SW, we remove two SW-specific bits (`PF_LOCK_HORIZ` and `PF_LOOKING`) that are no longer needed.
* For Duke, we remove `return_to_center` and just use the `SB_CENTERVIEW` action bit as required.
* For `sethorizon()`, feature set and adjustment speeds are an averaged out accumulation across Duke/SW:
** GameTicRate is factored in for adjustment decisions to provide consistency for SW being the faster game.
** Adjustment amounts are half way between Duke/SW.
* Need SW's input helpers available for Blood but therefore also need an angle delta function that does not seem to exist in Blood.
* Realise that gamecontrol.h/cpp might not be the most appropriate place, but it's a shared location and these will go into binaryangle.h when its utilisation can be more realised.
* Because SW's logic was reversed, in that param #1 was the new angle and param #2 was the current, all calls have been reversed.
* By happenstance, also fixes an issue with multiple 180° turns in quick succession.
This unexpectedly turned out a complete rewrite so now it is under my own license.
Also moved the remaining parts of map hack loading into the engine.
Overall I have to say that the feature is not what I expected, it's merely used to fudge the positioning of model sprites and for adding Polymer lights.
* the palette shader was not bound.
* the palette textures were not bound.
* palette mode still used regular lighting on top of the palette emulation
This works a lot better than before but is still not complete.
There were two errors:
1. The postprocessor was not run on the generated scene so that the target framebuffer never got set.
2. The generated PNG was not finalized and failed the integrity check of the savegame menu.
Fixes#48
This allowed significant simplification of code data and many of the error checks could also be simplified because this player doesn't really need it all.
Also use nanoseconds to count frame delays, not milliseconds, as milliseconds can cause timing anomalies with common frame rates very easily.
Also optimized the base64 encoder to avoid creating endless memory copies, thanks to using std::string which is a really poor container for this kind of stuff when workig with larger blocks of data.
* Provide read-only/const results from `CONTROL_GetInput()` so games can't change received input.
* Change non-descript `info` to `hidInput` (Human Interface Device).
* Remove a few unused prototypes.
Since the decoder cannot handle sound, there's two options:
1: Use the same sounds as the video it replaces.
2: If an identifiable streamable sound with the same base name is found, it will be played along with the video.
Fixes#133
* use static_assert directly. Raze is C++17, no need for that macro shit.
* removed CONSTEXPR - I seriously fail to see the use here, many of the functions marked as CONSTEXPR cannot possibly even be constant evaluated so the declaration makes no sense. Removed most of these and replaced the valid ones with the official constexpr keyword.
* got rid of EDUKE_PREDICT_FALSE - this makes zero sense in script parsing code, at best it will save a few microseconds. Clean code wins.
* replaced Blrintf with xs_CRoundToInt. Shitty name is shitty name, even if derived from POSIX.
* replaced Bstr*casecmp with str*icmp. As these get defined in the CMake project based on actual compiler checks they are preferable here.
* removed lots of other stuff that is not needed with a minimum compiler requirement of C++17.
The remaining excpetions are the "give" CCMD and any level change action.
Unfortunately the implementation of most cheats is not multiplayer safe so right now it'd only be useful for demo recording (assuming that worked to begin with... ;))
This includes loading a level and busy-waiting for a sound to play.
Also block these loops and the sounds they wait for in network games to avoid problems from longer delays here.
The problem seems to be directly inherited from ZDoom which shows the same issue with screen wipes.
Fixes#297
* Remove fix16.h/cpp and utilise library from m_fixed.h.
* Extend m_fixed.h with two inline functions for int to/from float operations.
* Replace fix16_floor operations with those from xs_Float.h
* Replace multiple Q16.16 conversions from 0 to just be 0.
* Replaced all found in-game bit-shifts and multiplications/divisions with inline functions from m_fixed.h
* Replaced many casts of FRACUNIT as double in SW's panel.cpp as it is converted to double by way of type promotion.
* Fixed missed precision fixes in SW's panel.cpp where some types weren't declared correctly.
* Replaced 100+ `Cos()/Sin() >> 16` operations for Blood with inline functions `CosScale16()/SinScale16()`.
This is because 'classic' aim mode will reset the view if the mouseaim key is not pressed.
The problem with this is that an empty input packet will trigger a view reset. If the meaning is inverted the default aim mode is free mouse view which doesn't try to alter any view state and is therefore preferable for an empty packet.
Fixes#292
The frame rate cap is only deactivated if there's actual animations running so that leaving the game in the menu won't make the engine run at high frame rates.
Fixes#288.
This timer only gets incremented by the main game ticker when the playsim is running.
This timer gets used for all playsim-related timing and animations so that these are decoupled from imprecisions in the global timer.
The new main loop code cannot handle that. Instead set a start value for gameclock so that gameclock can be based on an arbitrary time value instead of directly representing global time.
* moved the part that alters the input before queuing it to GetInput
* moved moveloop into the main function
* reshuffled a few things for better grouping by task.
This not only was redundant with m_filter, even worse, it was in the wrong place.
Control_GetInput is used to read the current input state from the backend and can get called at uneven intervals, or even multiple times during the same frame, so smoothing the movement here can lead to erratic behavior.
With this change CONTROL_GetInput will return the same data unless it gets updated between calls.
In particular this means to remove the option to disable widescreen aspect ratios. The way this was handled makes no sense with the current render backend.
The aspect ratio code will have to be redone entirely to properly obey the backend's settings.
None of this was really working anymore, but will have to be rethought once a network stream exists again.
But even then, this is better sent as a separate command, and in MP only.
Currently the bit fields are still separate and they have to be merged, but for now the added memory does not matter.
Having this structure in the common parts will allow work on consolidating the input code, though.
* Given the original code in `pNukeAction()` (poorly named), the intent appeared to be that the weapon should go off-screen for preparation, returning once weapon initialised.
* Commit restores that behaviour behind a CVAR.
# Conflicts:
# source/core/gamecvars.cpp
# source/core/gamecvars.h
This needs to be called unconditionally for every frame being rendered, not all of the game modules did that.
Placing this call here ensures that it is independent of anything the games do.
* removed the timer callback stuff that came back through the backdoor.
* do not use gameclock in the UI code - use the underlying timer directly.
* UpdateSounds must still use totalclock, until this can be refactored in its entirety.
* Breaks every other game except Duke unless/until they get migrated. Done for the purpose of demonstrating PR #244.
# Conflicts:
# source/build/src/timer.cpp
# source/games/duke/src/game.cpp
* rewrote all uses of timerSetCallback. Most were unnecessary or long obsolete, the sound updates need to run per frame, not per tic and the UI tickers need to be handled in the main loop anyway.
* Use a more precise timer to animate the menu transition.
* uncouple other menu animations from the game timer.
This removes most of the InputState class because it is no longer used.
The only remaining places still checking scan codes are the modifiers for sizeup and sizedown.
All the rest was remapped to safer methods. The multiplayer taunts are currently inoperable, they will need support of shift-bindings to get proper support.
This is to cut down on boilerplate code because these encode the virtual screen size in the mode parameter, making it unnecessary to specify a virtual size separately.
* use a CVAR to decide whether to show them at the top or bottom
* draw them on top of the screen border so that they don't get overdrawn on smaller windows.
In other places I_GetEvent should be used to call the system's message pump and keep the app responsive, but all game side processing should be skipped.
Avoid passing this anywhere in the client code. It should only be set right before rendering the 3D view and the only code using the base palette should be the 3D renderer and hud_drawsprite.
Also make the palette override CVARs 3D view only in debug mode.
