These two functions draw a vertical line 4 neighboring pixels at a time.
This gives a significant speed boost for a full screen solid and masked wall
scene for x86_64 (where we have plenty of registers), about 60 --> 76 fps.
git-svn-id: https://svn.eduke32.com/eduke32@2497 1a8010ca-5511-0410-912e-c29ae57300e0
Also, a very minor change in the con/def module code. (int --> int32_t)
git-svn-id: https://svn.eduke32.com/eduke32@2495 1a8010ca-5511-0410-912e-c29ae57300e0
A run of consecutive mapstates may share sector/wall/sprite blocks, but
the code was deciding whether to free them solely on local properties.
Now, save a reference count at the beginning of each such allocated block
and free it only if it reaches zero.
git-svn-id: https://svn.eduke32.com/eduke32@2492 1a8010ca-5511-0410-912e-c29ae57300e0
Also, always print at least level 5 corruptions (that is, have no instances
of completely silent corruptcheck).
git-svn-id: https://svn.eduke32.com/eduke32@2490 1a8010ca-5511-0410-912e-c29ae57300e0
This checks for about every possible type of sprite list corruption and
reports back with a corruption level 5 if one of the 14 validations fail.
git-svn-id: https://svn.eduke32.com/eduke32@2489 1a8010ca-5511-0410-912e-c29ae57300e0
- start scrolling from about half of the visible page
- PGUP/DGDN moves the cursor by 1/4 of the page
- code cleanup (we only need one displine[80], use clearkeys())
git-svn-id: https://svn.eduke32.com/eduke32@2488 1a8010ca-5511-0410-912e-c29ae57300e0
- Make all arguments explicit toggles (except for onlyzip).
- Disable PowerPC builds by default on Snow Leopard in addition to Lion.
- Enable Darwin 9 compatibility for all builds whenever PowerPC is enabled.
git-svn-id: https://svn.eduke32.com/eduke32@2487 1a8010ca-5511-0410-912e-c29ae57300e0
Note the capitalization. I hope that this makes clashes with user variable
names less likely.
git-svn-id: https://svn.eduke32.com/eduke32@2484 1a8010ca-5511-0410-912e-c29ae57300e0
Also include one comment about a currently failing assertion there.
git-svn-id: https://svn.eduke32.com/eduke32@2482 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, if the sprite turned really out to be in void space, either freelist
inconsistency (before the list rewrite) or oob access (now) would happen.
Also add an bound-checking assert() for insertsprite's sectnum argument (it's not
a bound check!)
git-svn-id: https://svn.eduke32.com/eduke32@2480 1a8010ca-5511-0410-912e-c29ae57300e0
New engine variable 'int32_t Numsprites', not yet saved into savegames
or mapstates. (The capitalization is to distinguish it from the often-used
'numsprites' locals or structure member names.
In the editor, get rid of updatenumsprites().
git-svn-id: https://svn.eduke32.com/eduke32@2478 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, the lists starting at headspritestat[MAXSTATUS] and
headspritesect[MAXSECTORS] were both used as sprite freelists and were always
in complete synchrony. Now, make only the statnum list keep the free sprites.
This way, it has no CON compatibility implications because
headspritesect[MAXSECTORS] is inaccessible there. Leave the array at its
original size for now.
git-svn-id: https://svn.eduke32.com/eduke32@2477 1a8010ca-5511-0410-912e-c29ae57300e0
Makefiles: new features to facilitate above:
- buildtools: "make printutils" is a phony which simply lists all the tools
- $(EXESUFFIX_OVERRIDE)
git-svn-id: https://svn.eduke32.com/eduke32@2476 1a8010ca-5511-0410-912e-c29ae57300e0
The major outside-visible change is that this fixes the sound cutoff bugs that
happened because newly-spawned sprites took the place of those whose sounds
had not yet finished playing.
Besides, there are these changes:
- remove deletesprite{sect,stat}
- we have a new engine variable 'tailspritefree' that keeps track of the
sprite freelist tail
- we need to store it in savegames and mapstates, so bump the savegame
minor version
git-svn-id: https://svn.eduke32.com/eduke32@2470 1a8010ca-5511-0410-912e-c29ae57300e0
This is simply done by using the two list helper functions defined earlier
instead of a deletespriteX/insertspriteX pair.
git-svn-id: https://svn.eduke32.com/eduke32@2469 1a8010ca-5511-0410-912e-c29ae57300e0
Factor out two helper functions, do_deletesprite{sect,stat}
and do_insertsprite_at_headof{sect,stat}.
git-svn-id: https://svn.eduke32.com/eduke32@2466 1a8010ca-5511-0410-912e-c29ae57300e0
These operations aren't executed THAT often to warrant exposing four internal
functions. Besides, I'll be hacking on them and need everything laid out
cleanly. Should somebody complain, they can go change them to __fastcall or
something.
git-svn-id: https://svn.eduke32.com/eduke32@2465 1a8010ca-5511-0410-912e-c29ae57300e0
In changesprite{stat,sect}, don't check for deletesprite{stat,sect} failure,
because the only way it can fail was already checked for above. So, this is
essentially dead code elimination.
git-svn-id: https://svn.eduke32.com/eduke32@2462 1a8010ca-5511-0410-912e-c29ae57300e0
- JFBuild ports: arttool, givedepth, and mkpalette
- All viable tools are now built when 'make utils' is invoked, not just some
- Revert "initprintf" hack of previous commit and replace it with "compat_tools.c"
- Move Bstrtolower from baselayer.c to compat.c
- Makefiles: Add start and finish messages for the tools
- Makefiles: To prevent "-Wimplicit" from being passed to the C++ compiler, create $(*CONLYFLAGS)
git-svn-id: https://svn.eduke32.com/eduke32@2458 1a8010ca-5511-0410-912e-c29ae57300e0
- Adding $(EXESUFFIX) where it belongs in the Makefile.
- Eliminating a call to initprintf() from compat.c. This may not be ideal.
git-svn-id: https://svn.eduke32.com/eduke32@2457 1a8010ca-5511-0410-912e-c29ae57300e0
- Generate changelog and add to zip.
- Increase minimum version to Leopard 10.5.
- Fix typo in usage printout.
git-svn-id: https://svn.eduke32.com/eduke32@2455 1a8010ca-5511-0410-912e-c29ae57300e0
This might now be even more confusing for users reading both the source
and CON code (where the access is necessarily still via '.clipping'),
but at least reading the source now makes sense :P
git-svn-id: https://svn.eduke32.com/eduke32@2454 1a8010ca-5511-0410-912e-c29ae57300e0
This is so that in the event of a crash, no CON dump will be printed if no
(actor or loadactor) CON code was actually executing at the time of the
crash, confusing the users. Note: doesn't apply for event code.
git-svn-id: https://svn.eduke32.com/eduke32@2453 1a8010ca-5511-0410-912e-c29ae57300e0
We've been running with same-sized actor_t for a while without problems now.
In the unlikely event (famous last words) that an issue should pop up later,
this revision should be consulted for the differences between the two versions.
git-svn-id: https://svn.eduke32.com/eduke32@2451 1a8010ca-5511-0410-912e-c29ae57300e0
- forgot a glogy --> logy in a-c.c
- comment out stretchhline and slopevlin2 in a.nasm, the former also in a-c.c
- make transmaskvline2 use a uintptr_t where appropriate
git-svn-id: https://svn.eduke32.com/eduke32@2448 1a8010ca-5511-0410-912e-c29ae57300e0
With VBOs enabled, the virtual pointer to the geometry of frame 0 of a model
is always NULL. This was confusing the polymer code responsible for deciding
whether to enable smooth animations or not, which meant that any animation
that would loop to frame 0 would do it as if animation interpolation was
disabled, which looks very choppy.
git-svn-id: https://svn.eduke32.com/eduke32@2443 1a8010ca-5511-0410-912e-c29ae57300e0
The format is
snd #<sound number>
inst <instance of that sound>:
voice <internal voice handle>,
ow <owner's sprite ID/-1> (this is the interesting part)
git-svn-id: https://svn.eduke32.com/eduke32@2441 1a8010ca-5511-0410-912e-c29ae57300e0
- make a couple variables static in sounds_mapster32.c
- KHz --> Hz in initialization text
git-svn-id: https://svn.eduke32.com/eduke32@2439 1a8010ca-5511-0410-912e-c29ae57300e0
- make some variables static
- conditionally compile out some code with DEBUG_ALLOCACHE_AS_MALLOC
- exit(1) on failure (instead of exit(0))
- some formatting
git-svn-id: https://svn.eduke32.com/eduke32@2438 1a8010ca-5511-0410-912e-c29ae57300e0
- Conditional disabling of the build for each architecture
- Conditional enabling of debug building
- Detection of the OS X version, disabling incompatible builds and establishing a minimum version
- Fail-safe assembly of fat binaries and the archive (each item is checked first)
- Lovely factored 'for' loops and parameter expansion
git-svn-id: https://svn.eduke32.com/eduke32@2437 1a8010ca-5511-0410-912e-c29ae57300e0
Note: I'm not really sure whether I'm initializing it in the right places.
git-svn-id: https://svn.eduke32.com/eduke32@2429 1a8010ca-5511-0410-912e-c29ae57300e0
When drawing from inside the mirror, there may be no 'bunches' (BUILD lingo,
not TROR ones) collected, but following code used the first one unconditionally.
git-svn-id: https://svn.eduke32.com/eduke32@2427 1a8010ca-5511-0410-912e-c29ae57300e0
Hlines for masked and translucent masked ceiling/floor (sprites).
- apply the --> 'do { ... } while (--cnt)' transformation, making these
functions iterate cnt+1 times like the asm version. This also fixes an
off-by-one issue where sprites or masked ceilings/floors had a one-pixel
non-drawn line to the right.
- This time, only declare-as-local two 'extern' globals (asm1 and asm2).
It seems that I was too eager with "localing" all file-scoped vars earlier.
GCC is able to remove the loads from memory inside the loop by itself, whereas
clang is not. This is not trivial, since it has to prove that the 'screen'
pointer passed to the functions will never alias these globals.
git-svn-id: https://svn.eduke32.com/eduke32@2424 1a8010ca-5511-0410-912e-c29ae57300e0
The apparent horizon (in units proportional to pixels by a constant factor)
was being calculated without normalizing to viewingrange, resulting a
discrepancy between the drawn and actual up/down angle with non-default
viewingranges (e.g. with r_usenewaspect=1, or when setting it from setaspect).
This also means that the center-of-aim will now be the same regardless of
the aspect.
This fixes many derived bugs:
* inconsistency w/ crosshair when shooting a gun and aiming up/down (obviously)
* bugs resulting from being able to look up/down too far (garbage non-slope
texture-mapping and viewing BIGORBIT skies above the borders in classic).
Note: mods that had workaround logic for this bug will have to remove it...
git-svn-id: https://svn.eduke32.com/eduke32@2414 1a8010ca-5511-0410-912e-c29ae57300e0
added: sector extra; viewingrange and yxaspect before the main drawrooms call
removed: randomseed
git-svn-id: https://svn.eduke32.com/eduke32@2413 1a8010ca-5511-0410-912e-c29ae57300e0
This has no measureable difference. Oh well, maybe it benefits weaker
machines, since the generated loop code should definitely be prettier.
git-svn-id: https://svn.eduke32.com/eduke32@2408 1a8010ca-5511-0410-912e-c29ae57300e0
This doesn't give much, maybe 0.5 fps more, probably because the
loop body is pretty long.
git-svn-id: https://svn.eduke32.com/eduke32@2406 1a8010ca-5511-0410-912e-c29ae57300e0
Affected functions: hlineasm4, vlineasm1, mvlineasm1, tvlineasm1.
Optimizations:
- declare all used variables as possibly const-qualified locals in each
function. This removes unnecessary loads from memory in the loops.
- rewrite "for (; cnt>=0; cnt--) {...}" to "cnt++; do {...} while (--cnt);"
in the three last ones (yes, these function iterate cnt+1 times). This
makes them functionally equivalent to the asm versions (madness ensues for
cnt < 0) and allows the compiler to remove one 'test' instruction at the
end of each loop.
- in the translucence function, replace addition by ORing
Observations (system: Core2 Duo Linux x86_64):
With a 1680x1050 window fully covered by the respective type of wall (simple,
masked, trans. masked), fps increases by 3-4 from the baseline of approx. 60.
git-svn-id: https://svn.eduke32.com/eduke32@2405 1a8010ca-5511-0410-912e-c29ae57300e0
- remove the objects too on 'clean'
- fix warning with 'transpal' on x64
(generates translucency and shade tables)
git-svn-id: https://svn.eduke32.com/eduke32@2404 1a8010ca-5511-0410-912e-c29ae57300e0
- print compilation status for building the final executable
- add 'cleanutils' target in build/Makefile
- don't link against pthread, seems unnecessary
- don't build nedmalloc.o when not requested in Makefile.common
git-svn-id: https://svn.eduke32.com/eduke32@2403 1a8010ca-5511-0410-912e-c29ae57300e0
- Exclude "Apple/lib" rather than "Apple" so that required files are not left out of the tarball.
- Add one to $lastrevision before generating the ChangeLog so that it only includes what is new to an update.
osxbuild.sh:
- Add stronger detection of the SVN revision by adding support for 1.7 (no longer relying on an ".svn" directory) and having a specific fallback in case the build location is neither svn nor git.
- Echo the SVN revision to source/rev.h before the build processes and revert it afterwards.
git-svn-id: https://svn.eduke32.com/eduke32@2402 1a8010ca-5511-0410-912e-c29ae57300e0
It needs to have the sound quality box removed and the Game directory box added, possibly among other things.
git-svn-id: https://svn.eduke32.com/eduke32@2396 1a8010ca-5511-0410-912e-c29ae57300e0
The replacement of atoi with strtol in r2374 had the side-effect that numbers
out of the range of a 32-bit integer were being returned as LONG_MAX/LONG_MIN
instead of being converted by taking the bits and re-interpreting them (note
that it was a coincidence that atoi behaved that way; to be strict, the
behavior was undefined and there is no regression).
Now, we implement parsing decimal integers using strtoll (with assuming
"long long" being the same as int64_t) and check in which range the number
falls. If it's in the range (INT32_MAX <= x <= UINT32_MAX), issue a warning;
if it's not in (INT32_MIN <= x <= UINT32_MAX), warn too (though this better
ought to be an error?). In each case, the bit representation is converted to
the CON number type (int32 to assume maximum portability) by re-interpreting
the bits [this is the same as an int/int cast, with GCC at least; more
generally, it's implementation-defined per C99].
git-svn-id: https://svn.eduke32.com/eduke32@2392 1a8010ca-5511-0410-912e-c29ae57300e0
(Classic renderer). We don't need 64-bit integers; also use the nice
asm version of divscale32() if possible.
git-svn-id: https://svn.eduke32.com/eduke32@2390 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes mirrors consisting of more than one walls not drawing when the
first assigned mirror wall breaks. It still does not let you have more
than one mirror (i.e. mirror sectors) showing up at the same time in
the scene. Affects classic and Polymost only.
git-svn-id: https://svn.eduke32.com/eduke32@2387 1a8010ca-5511-0410-912e-c29ae57300e0
* update Windows icons to include 64x64, 128x128, and 256x256 sizes
* add "orange_icon.ico" (unused; classic orange color of logo)
* remove unused 32x32 "build_icon.bmp" file
git-svn-id: https://svn.eduke32.com/eduke32@2382 1a8010ca-5511-0410-912e-c29ae57300e0
This was causing oob sector accesses with code like this:
getwall[hitwall].nextsector temp
ifvarvare sector[temp].floorz sector[temp].ceilingz setvar tempb 1
(from DT's HYPERCORE).
Also validate quote indices passed to CON's quote and userquote commands at
runtime.
git-svn-id: https://svn.eduke32.com/eduke32@2381 1a8010ca-5511-0410-912e-c29ae57300e0
Such game text was shown starting from about the center of the screen.
The reason for the bug was this code:
t += 1 + isdigit(*(t+2));
The sequence points here are at the beginning and end of this assignment
expression, and the updating of t may happen anywhere between these (C99
6.5.16 #3). Please don't write such code. When in doubt, and assignment
and reference to the same object should be split!
git-svn-id: https://svn.eduke32.com/eduke32@2380 1a8010ca-5511-0410-912e-c29ae57300e0
This plays more nicely with automatic formatters. Also indent accordingly.
git-svn-id: https://svn.eduke32.com/eduke32@2379 1a8010ca-5511-0410-912e-c29ae57300e0
Because: 1) It used to be like this; 2) guard against bad CON input.
git-svn-id: https://svn.eduke32.com/eduke32@2378 1a8010ca-5511-0410-912e-c29ae57300e0
Encountered with Scent.map. Since the SE21 are deleted after they have
been used, the search for them in the ST28 code in sector.c may come up
empty, in which case sector[-1] would be accessed.
git-svn-id: https://svn.eduke32.com/eduke32@2377 1a8010ca-5511-0410-912e-c29ae57300e0
This was discovered because viewscreens (TILE_VIEWSCR) ceased being drawn
with the MAXTILES increase (reported by Hank, who also did the bisect).
git-svn-id: https://svn.eduke32.com/eduke32@2376 1a8010ca-5511-0410-912e-c29ae57300e0
That is, everyplace a user input is to be converted. The only remaining
instance of atoi() is now atoi(s_buildDate).
git-svn-id: https://svn.eduke32.com/eduke32@2374 1a8010ca-5511-0410-912e-c29ae57300e0
Internally, the last argument to neartag is now a pointer to a function
int32_t (*blacklist_sprite_func)(int32_t i),
which is supposed to return 1 if sprite[i] should NOT be considered for hitting.
This is now used in the hard-coded neartag() calls in sector.c, but not in any
way in CON (there's neither a C blacklist function provided, nor is there a
possibility to define one in CON). There, all sprites with picnums >=1 and <=10
(i.e. the effectors) will be blacklisted. This remedies problems where such
sprites would get in the way of switches.
Note that a whitelist approach (only consider a predefined set, namely those
picnums which will be checked afterwards) has back-compatibility implications
since people may have used e.g. lotagged window sprites to cover a switch.
Also, the >=1 to <=10 range is [sic] (the static, not dynamic values are used),
since anyone redefining effector picnums is clearly out of their mind.
git-svn-id: https://svn.eduke32.com/eduke32@2373 1a8010ca-5511-0410-912e-c29ae57300e0
lzwcompress can access one byte after lzwrawbuf[LZWSIZE] when provided with
an uncompleng of LZWSIZE, so we increase that array's size by one.
git-svn-id: https://svn.eduke32.com/eduke32@2369 1a8010ca-5511-0410-912e-c29ae57300e0
Remove dfread and kdfwrite, only leave a recipe how to get their
source from the respective used functions.
git-svn-id: https://svn.eduke32.com/eduke32@2368 1a8010ca-5511-0410-912e-c29ae57300e0
I'm not getting this warning (synthesis is) but I think it's justified because
the VOC block parsing code isn't terribly validating...
git-svn-id: https://svn.eduke32.com/eduke32@2364 1a8010ca-5511-0410-912e-c29ae57300e0
The following functions have const qualifiers attached for the 'destination'
arguments: kdfwrite, dfwrite in cache1d.c and copybuf{byte,reverse,} in the
pragmas source or headers. A couple uses of the latter ones were replaced
with calls to standard library functions.
git-svn-id: https://svn.eduke32.com/eduke32@2361 1a8010ca-5511-0410-912e-c29ae57300e0
This is useful to debug out-of-bound violations for memory allocated
with that function.
git-svn-id: https://svn.eduke32.com/eduke32@2360 1a8010ca-5511-0410-912e-c29ae57300e0
- RENDERER SETUP is now also accessible from classic, with only 2 options:
'aspect ratio' and 'ambient light level'
- remove the latter option from the VIDEO SETUP menu
- When compiled with OpenGL, the aspect ratio option cycles between 3 states:
r_usenewaspect=1 (the modern way), and r_usenewaspect=0 but r_widescreen=0/1.
In non-GL builds, there are only 2 states.
- don't display black translucent overlay in COLOR CORRECTION menu
git-svn-id: https://svn.eduke32.com/eduke32@2358 1a8010ca-5511-0410-912e-c29ae57300e0
This makes more sense because the game selector draws the names with uppercase
letters and the hotkeys to jump to a map starting with a particualar letter
aren't case sensitive, either. Mapster32's selector will still display maps
starting with upper case first.
git-svn-id: https://svn.eduke32.com/eduke32@2356 1a8010ca-5511-0410-912e-c29ae57300e0
The bulk are whitespace changes; the only exception is a
"if (expr) { stmt; }" --> "if (expr) stmt;"
git-svn-id: https://svn.eduke32.com/eduke32@2353 1a8010ca-5511-0410-912e-c29ae57300e0
Also, there's a "ladder" that passes through a TROR portal, and the mirror
in that map has been fixed for the classic renderer.
git-svn-id: https://svn.eduke32.com/eduke32@2351 1a8010ca-5511-0410-912e-c29ae57300e0
The reason was that drawmasks(), which was where the resetting of the fake
RoR textures happened under Polymer, can be called from polymer_displayrooms()
when mirrors are present. I was assuming that drawmasks() was only ever called
after the 'main' drawrooms and that hence the sequence of fake RoR tile tweaking
was set, reset, set, reset, ... which it was not.
Now, do the resetting explicitly after every drawmasks() in the editor.
git-svn-id: https://svn.eduke32.com/eduke32@2350 1a8010ca-5511-0410-912e-c29ae57300e0
I find this cleaner for two reasons. First, lotags won't get in the way of
neartag(), so that doors and switches near constrained TROR walls can be
pushed. Second, this removes the information leak so that CON coders aren't
tempted to read that values directly before a proper API for that comes along.
When writing out a map in-game (e.g. with dndebug), restore the respective
members so that it can be loaded in the editor again.
git-svn-id: https://svn.eduke32.com/eduke32@2349 1a8010ca-5511-0410-912e-c29ae57300e0
getzrange() returns the floor rather than the sprite if their heights are
equal. Now, make an exception for extended floors (analogously, ceilings).
git-svn-id: https://svn.eduke32.com/eduke32@2347 1a8010ca-5511-0410-912e-c29ae57300e0
- Maintain a position relative to the start of the data. VOC doesn't
mandate an EOF marker (blocktype 0). If we go over the end, fake
that marker, so as to restart a looping sound or stop a one-shot one.
This fixes an uninitialized mem access with the corrupt SNAKRM.VOC.
- When encountering the EOF marker, don't read the 3 bytes of block size,
since they may not be there.
- Read blocksize by ORing and shifting the 3 bytes, not with *(int32_t *)...
git-svn-id: https://svn.eduke32.com/eduke32@2346 1a8010ca-5511-0410-912e-c29ae57300e0
- guard cansee() against negative sectnums (return 0 immediately), since
it's often called with the player sectnum as one argument
- in resetpspritevars(), don't inset APLAYER sprite if sectnum < 0, which
can happen if a map is started in void space accidentally (e.g. from
the editor)
- two checks before accessing sector[] with a player sectnum
git-svn-id: https://svn.eduke32.com/eduke32@2342 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes updateanimation picking up foreign (and thus potentially oob)
frame numbers at "3: c > n".
git-svn-id: https://svn.eduke32.com/eduke32@2339 1a8010ca-5511-0410-912e-c29ae57300e0
Uncomment #define DEBUG_VALGRIND_NO_SMC in duke3d.h to be able to
valgrind --smc-check=none (or the default stack-only)
with Polymost and Polymer renderers.
git-svn-id: https://svn.eduke32.com/eduke32@2337 1a8010ca-5511-0410-912e-c29ae57300e0
It was causing update issues when many tints were applied simultaneously,
like being shot and spit at by enforcers while being on rails barefeet.
Also, the GL modes were calling gltexinvalidate8() when picking up goodies
or being hurt with that change, so it needs much more thought.
git-svn-id: https://svn.eduke32.com/eduke32@2322 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes a bug in passing: 'int32_t j' was assigned to as a temporary inside
one instance of the code, but used as if it were the previous sprite index
further on. Would only happen with projectiles that "work like" both SPIT
and RPG_IMPACT.
git-svn-id: https://svn.eduke32.com/eduke32@2321 1a8010ca-5511-0410-912e-c29ae57300e0
- make PGUP/PGDN and HOME/END behave as expected across all menus
- in keyboard/mouse button mapping menu, draw function names that have been given
custom names via CON with pal 8 for easier recognition
- fix tinting of function names in mouse button mapping menu
git-svn-id: https://svn.eduke32.com/eduke32@2313 1a8010ca-5511-0410-912e-c29ae57300e0
Internally, there's a new function fade_screen_black() that implements the
fading more efficiently than calling rotatesprite for classic, and uses
tile 0 (assumed to have at least 64x32 size) in the GL modes.
The black background of the user map selector is still done with rotatesprite
and tile BLANK in every renderer.
git-svn-id: https://svn.eduke32.com/eduke32@2312 1a8010ca-5511-0410-912e-c29ae57300e0
So that the game won't exit if you write 'vidmode 4' when intending
'setrendermode 4'.
git-svn-id: https://svn.eduke32.com/eduke32@2311 1a8010ca-5511-0410-912e-c29ae57300e0
The problems still remains that rotatesprite behaves differently in classic and
OpenGL modes with clipping boundaries specified (and maybe in some other cases)
git-svn-id: https://svn.eduke32.com/eduke32@2304 1a8010ca-5511-0410-912e-c29ae57300e0
This means that when e.g. emerging from water hurt will change the
palette instantly, but because bit 16 is added to the P_SetGamePalette
call, the tinting is retained.
git-svn-id: https://svn.eduke32.com/eduke32@2303 1a8010ca-5511-0410-912e-c29ae57300e0
The implementation uses the recently introduced updatesector_onlynextwall when
setspritez fails.
git-svn-id: https://svn.eduke32.com/eduke32@2302 1a8010ca-5511-0410-912e-c29ae57300e0
Of course, only when the mod/TC in question doesn't use that feature.
git-svn-id: https://svn.eduke32.com/eduke32@2301 1a8010ca-5511-0410-912e-c29ae57300e0
led out or not. Removing features that certain mods may depend on to operate correctly without throwing any kind of
error or warning at startup other than a logged message is bad.
git-svn-id: https://svn.eduke32.com/eduke32@2300 1a8010ca-5511-0410-912e-c29ae57300e0
for an assertion failure with clang. Really ought to file a bug report instead.
git-svn-id: https://svn.eduke32.com/eduke32@2292 1a8010ca-5511-0410-912e-c29ae57300e0
It looks like GCC doesn't honor the 'used' attribute with LTO. This is
"fixed" by declaring the variables in question with external linkage
(i.e. removing the 'static'). I consider such behavior a GCC bug, though.
git-svn-id: https://svn.eduke32.com/eduke32@2286 1a8010ca-5511-0410-912e-c29ae57300e0
The "double-click button4" had to make way for MOUSE5 in the button binds menu,
but I don't think anyone cares. Savegame compatibility was actually silently
broken with the MAXTILES update earlier, but I forgot updating the version...
git-svn-id: https://svn.eduke32.com/eduke32@2284 1a8010ca-5511-0410-912e-c29ae57300e0
Also a couple of other cleanup lines... might need more though, I'm not sure
it's all good there.
git-svn-id: https://svn.eduke32.com/eduke32@2278 1a8010ca-5511-0410-912e-c29ae57300e0
Internally, updateanimation() now takes a third parameter 'lpal'.
git-svn-id: https://svn.eduke32.com/eduke32@2277 1a8010ca-5511-0410-912e-c29ae57300e0
This may fix compilation for optimized builds with GCC or clang where
the compiler would otherwise decide that those symbols are unused.
git-svn-id: https://svn.eduke32.com/eduke32@2271 1a8010ca-5511-0410-912e-c29ae57300e0
If enabled, this makes the following arrays be allocated statically:
spriteext, spritesmooth, sector, wall, sprite, tsprite, while
necessarily disabling the clipshape feature (because it relies on
setting sector/wall to different malloc'd block temporarily).
To compile, pass DEBUGANYWAY=1 in addition to RELEASE=0 to 'make',
and it's really only useful with CC=clang, of course.
git-svn-id: https://svn.eduke32.com/eduke32@2270 1a8010ca-5511-0410-912e-c29ae57300e0
Ideally, we would also warn when setting WEAPONx_SHOOTS to negative values, but
we'd have to intercept CON's setvar's and it wouldn't be pretty.
git-svn-id: https://svn.eduke32.com/eduke32@2268 1a8010ca-5511-0410-912e-c29ae57300e0
I'm decreasing EXTRATILES because I feel that it's way overcommitted. It's the
max number of model-tiles that have their own skin for a certain palette,
like the slimer egg in the HRP.
git-svn-id: https://svn.eduke32.com/eduke32@2267 1a8010ca-5511-0410-912e-c29ae57300e0
- fix one bound-checking line
- rewrite two lines in astub.c to potentially not overflow an int16
- make tiletovox[] an array of int16's
git-svn-id: https://svn.eduke32.com/eduke32@2266 1a8010ca-5511-0410-912e-c29ae57300e0
Always malloc that buffer. This allows us to remove suckcache() from
cache1d.c, which I believe to be buggy (see comments in the source).
git-svn-id: https://svn.eduke32.com/eduke32@2261 1a8010ca-5511-0410-912e-c29ae57300e0
- 'whitecol' was defined in the engine and in build.c, use only the engine one
- make cachesize, artsize, artversion static in engine.c
- undo some formatting havoc presumably done by astyle
git-svn-id: https://svn.eduke32.com/eduke32@2260 1a8010ca-5511-0410-912e-c29ae57300e0
It is likely that this is the value it used to have at some point, because
the MAXTILEFILES macro equals 256 and is as old as the Duke3D source.
loadpics() now refuses to load an ART file with localtilestart or localtileend
out of bounds, or if localtileend<=localtilestart (i.e. no tiles in ART file, or
nonsense). Also, on 'invalid art file version', continue instead of returning.
Note: this does not increase the maximum number of tiles, which is still 15360,
it only gives a bit more freedom to arrange them (well, into more art files).
Also, I don't see what anyone keeps off from packing any number of tiles (from
1 to 15360) into an art file. Old EDITART limits?
git-svn-id: https://svn.eduke32.com/eduke32@2259 1a8010ca-5511-0410-912e-c29ae57300e0
The cause was a combination of many factors. First, Polymer requires the
start-drawing position to be inside the sector to draw (deviations lead to
incorrect drawing). This was violated by the game, because it interpolated
the current and next tic position without updating the sectnum, leading to
inconsistencies especially when passing through narrow sectors. Polymer
worked around it by doing an updatesector() each frame, however this works
poorly for maps with overlapping geometry such as SoS or RoR.
The solution to this is to add a new engine function,
updatesector_onlynextwalls(), which searches the sectors (via nextsector)
in breadth-first fashion instead of from 0 to numsectors-1, like updatesector
does when it fails for the *immediate* nextwall neighbors.
Internally, the breadt-first search helpers are moved into the engine.
git-svn-id: https://svn.eduke32.com/eduke32@2256 1a8010ca-5511-0410-912e-c29ae57300e0
so try and steal it back"), prevent calling IDirectDrawSurface_SetPalette()
with NULL arguments, causing a crash. It's happened for me on Vista, when
initially changing from 8-bit to 32-bit mode.
git-svn-id: https://svn.eduke32.com/eduke32@2255 1a8010ca-5511-0410-912e-c29ae57300e0
I didn't have much success in finding bugs using it, but it works
out-of-the-box on my setup, so it may be useful in the future.
git-svn-id: https://svn.eduke32.com/eduke32@2254 1a8010ca-5511-0410-912e-c29ae57300e0
The second one is passed to the 'mouseb' variable, but the game currently
can't map it since ud.config.MouseFunctions[] would have to be enlarged,
breaking savegame compatibility.
Works both for the Windows and SDL layers. For the latter, instead of using
the SDL_BUTTON_X1/X2 macro constants, I'm using 8 and 9, since that is what
SDL (and incidentally or not, xev) gives me for those buttons.
git-svn-id: https://svn.eduke32.com/eduke32@2252 1a8010ca-5511-0410-912e-c29ae57300e0
It turns out that with model interpolation, out-of-bounds frame numbers may
be generated with thinned out models, so disable it until I can sort out
what's wrong with it.
Also, minor code cleanup.
git-svn-id: https://svn.eduke32.com/eduke32@2251 1a8010ca-5511-0410-912e-c29ae57300e0
Also, for debugging builds, show this message from verbosity level 1 on.
git-svn-id: https://svn.eduke32.com/eduke32@2250 1a8010ca-5511-0410-912e-c29ae57300e0
Since the original source code release of Duke3D, there was a potentially
dangerous hack where actor[].dispicnum was set to -4 to signal "this actor
should not have a floor shadow for this moment" (it doesn't really work,
if you ask me).
Now, use another bit of actor[].flags for that purpose because setting
any picnum members to negative values asks for trouble.
git-svn-id: https://svn.eduke32.com/eduke32@2249 1a8010ca-5511-0410-912e-c29ae57300e0
the only visible change is that polymost_trytexcache (formerly two
instances of nearly duplicate code) now prints a diagnostic after
a cache miss. The one that one is most likely to encounter is
"r_downsize doesn't match", meaning that this setting likely differs
between Mapster and the game.
git-svn-id: https://svn.eduke32.com/eduke32@2248 1a8010ca-5511-0410-912e-c29ae57300e0
E.g. this should work correctly now:
// FLY_BY, PIPEBOMB_EXPLODE, OCTA_DYING
animsounds logo { 1 244 64 14 64 144 }
git-svn-id: https://svn.eduke32.com/eduke32@2243 1a8010ca-5511-0410-912e-c29ae57300e0
The syntax is as follows:
animsounds <anim> { frame1 sound1 frame2 sound2 ... }
<anim> has to be one of the tokens: cineov2, cineov3, RADLOGO, DUKETEAM,
logo, vol41a, vol42a, vol4e1, vol43a, vol4e2, or vol4e3, corresponding
to hard-coded Duke3D anims.
The frameN's (1-based frame numbers) have to be in ascending order (but not
necessarily strictly ascending, so that a frame may have more than one sound).
Example: for Duke3D's XBLA nuke logo animation (IVF extracted from nuke.webm),
the following definition overlays the video with a sound sequence similar
(identical save for timing) to the original nuke animation:
// frame 1: FLY_BY, frame 64: PIPEBOMB_EXPLODE
animsounds logo { 1 244 64 14 }
git-svn-id: https://svn.eduke32.com/eduke32@2242 1a8010ca-5511-0410-912e-c29ae57300e0
the loop. For the release build and the test animation, this lowers the time
to 3-4 ms per conversion of one frame on my desktop machine.
git-svn-id: https://svn.eduke32.com/eduke32@2241 1a8010ca-5511-0410-912e-c29ae57300e0
let it hang around causing trouble later on; delete it right now and inform
the user.
Add a couple of 'static's to some functions and file scope data in mdsprite.c
git-svn-id: https://svn.eduke32.com/eduke32@2237 1a8010ca-5511-0410-912e-c29ae57300e0
the SE ones douple, triple, ... after each save. Maphack lights are reloaded
with polymer_resetlights() (though I've had them disappearing after load, I
couldn't reproduce it afterwards).
- in debugging builds, print a message when polymer_resetlight is called on a
nonexistent one. The problem is not so much the call itself (it's guarded),
but the fact that resources on the caller side may not have been freed if it
thinks that those lights do in fact exist. Right now, it's not the case though.
- add 'loaded map hack' messages after some other successful loadmaphack calls
git-svn-id: https://svn.eduke32.com/eduke32@2236 1a8010ca-5511-0410-912e-c29ae57300e0
crashes.
Usually, after loading a game, some wall tiles are tweaked depending on whether
adult mode is enabled or not. If it's not, those wall picnums are replaced
with blank or broken screens. If it is, they are restored from the wall's
.extra member. Apparently though, Mapster32 leaves some .extra members
floating around even after deleting a TROR nextwall link (it's used as the
'lower wall index'). Because MAXWALLS is greater than MAXTILES, this may
produce out-of-bounds accesses and corrupt memory (besides setting wall
tilenums to nonsensical values) later in the game.
Other than that, the change only affects loading savegames created with adult
mode OFF. Kinky TV screenies simply won't be restored then.
git-svn-id: https://svn.eduke32.com/eduke32@2235 1a8010ca-5511-0410-912e-c29ae57300e0
check one 'if' down since mirrors are only created when the condition holds
git-svn-id: https://svn.eduke32.com/eduke32@2233 1a8010ca-5511-0410-912e-c29ae57300e0
Resetting the gamevars might produce inconsistencies between an earlier loaded
game (for example, if it was saved with different/earlier CON code), and worst
of all, the gamevars that reference C variables might be overwritten (i.e. the
addresses to those variable, which is very bad!).
git-svn-id: https://svn.eduke32.com/eduke32@2230 1a8010ca-5511-0410-912e-c29ae57300e0
'frequently' isn't such a good idea. Assume an actor constantly changes the
palette to some value and you're attacked by a newbeast at the same time. Then
the pain tinting would be reset each time the actor's code is run. This commit
adds a new flag 16 to setbrightness(), meaning "don't reset the fade tinting".
Its only use right now is from CON's setgamepalette command (and there, always).
The change is done in the engine and thus affects all platforms.
git-svn-id: https://svn.eduke32.com/eduke32@2225 1a8010ca-5511-0410-912e-c29ae57300e0
certain situations (mostly cutscenes etc). This commit removes bit 1 from all
flags that make it to setbrightness, the meaning of which is "don't actually
update the palette". I have no idea what it was for and since the corresponding
P_SetGamePalette() calls were from places like the mentioned cutscenes, I don't
think it matters performance-wise.
git-svn-id: https://svn.eduke32.com/eduke32@2223 1a8010ca-5511-0410-912e-c29ae57300e0
This is in the similar vein as the set-palette deferring and it's this
that fixes the low FPS in the radioactively contaminated area in AMC TC:
Megabase (since setgamma() is called from setbrightness()).
Again, update issues might be expected, but changing focus between EDuke32
and the desktop and back seems to restore the gamma settings properly on
Kubuntu. Looks like X (or whatever above handles this stuff) maintains it
on a per-application basis.
git-svn-id: https://svn.eduke32.com/eduke32@2222 1a8010ca-5511-0410-912e-c29ae57300e0
CON code sometimes uses 'setgamepalette' from withing actors, which is a bit too
frequent. Deferring the actual palette updating means that multiple requests in
between two screen redraws are coalesced into one, which is desirable for
performance reasons and for the reduction of 'tearing' artefacts (but not
prevention, since the drawing isn't synced to the screen refresh rate with
vsync off).
(Did-not-)update issues might be introduced.
Windows isn't touched because
- I expect it to be more brittle, especially in light of the ATI HW gamma
problems.
- I haven't tested whether the particular performance penalty that lead to this
change ('gas' in AMC TC) exists there too
git-svn-id: https://svn.eduke32.com/eduke32@2221 1a8010ca-5511-0410-912e-c29ae57300e0
color-inversed shots. For both PNG and TGA, change the way they're
done in 8-bit mode: instead of XORing every byte with 15, save the
inverse palette (each component taken 255-x).
git-svn-id: https://svn.eduke32.com/eduke32@2219 1a8010ca-5511-0410-912e-c29ae57300e0
instead of shorts. This fixes their values' overflow in AMC TC megabase and
probably a couple of other large maps.
git-svn-id: https://svn.eduke32.com/eduke32@2216 1a8010ca-5511-0410-912e-c29ae57300e0
the constants 0 and 1, and moveptrs may reference the script up to index 2
then (though I'm not sure whether the code is reachable with moveofs either
0 or 1), so make sure it's nulled instead of whatever happened to compile at
the first two positions. Move 1 is only used once in the original cons,
when frozen and being shattered.
git-svn-id: https://svn.eduke32.com/eduke32@2211 1a8010ca-5511-0410-912e-c29ae57300e0
Now we don't need to worry about the numbers running out soon.
Bump BYTEVERSION by three to celebrate this, too.
git-svn-id: https://svn.eduke32.com/eduke32@2209 1a8010ca-5511-0410-912e-c29ae57300e0
This makes savegames practically the same as the initial snapshot of a demo.
Saves are now named 'dukesavX.esv' (demos: 'edemoX.edm').
Additionally, many changes that couldn't/needn't be cleanly separated are added
with this commit:
- make spriteext_t have the same size across 32/64 bit platforms (actor_t partially)
- prevent saving/loading in MP games (it certainly didn't work and still doesn't)
- it's time we start using assertions! Define NDEBUG for releasse builds.
- reset savegame major and minor versions (we have a new magic string, so no conflict)
git-svn-id: https://svn.eduke32.com/eduke32@2207 1a8010ca-5511-0410-912e-c29ae57300e0
It was identified with the clearfrags rewriting, but not corrected.
git-svn-id: https://svn.eduke32.com/eduke32@2203 1a8010ca-5511-0410-912e-c29ae57300e0
There were two instances of nearly identical code in premap.c and savegame.c.
Also identifies a (harmless) problem with realloc'ing, we had:
if (len+1 > sizeof(MapInfo[...].musicfn))
MapInfo[...].musicfn = Brealloc(MapInfo[...].musicfn, len+1)
which reallocs almost all the time (since .musicfn is a pointer). Now we do
realloc every time...
git-svn-id: https://svn.eduke32.com/eduke32@2202 1a8010ca-5511-0410-912e-c29ae57300e0
Bmemset(..., 0, sizeof(...)) instead of clearbuf(..., MAX..., 0),
because the latter would clear only half of the data on 64-bit platforms.
git-svn-id: https://svn.eduke32.com/eduke32@2189 1a8010ca-5511-0410-912e-c29ae57300e0
some information about it instead of simply omitting it.
Internally, struct savegame --> struct savegame_ for easier grepping.
git-svn-id: https://svn.eduke32.com/eduke32@2188 1a8010ca-5511-0410-912e-c29ae57300e0
32- and 64-bit platforms. Also, make struct type actor_t also have a common
size of 128 bytes. New code currently disabled and #ifdef'd for comparison.
This requires certain t_data[] entries ([1]: move ptr, [4]: action ptr and
[5]: ai ptr with actors) to be converted to script offsets instead of pointers,
breaking savegame and net packet compatibility (we could in theory try hard not
to, but it would be too much trouble).
git-svn-id: https://svn.eduke32.com/eduke32@2185 1a8010ca-5511-0410-912e-c29ae57300e0
Actors are always moved such that _they_ clip against blocking sprites, even
if their blocking bit is clear. Setting the new bit make them not clip against
anything. The promary use of this is for decorative moving sprites that are
spawned in masses, such as rain or snow.
git-svn-id: https://svn.eduke32.com/eduke32@2184 1a8010ca-5511-0410-912e-c29ae57300e0
already have MAXSPRITESONSCREEN of them, return 1 to signal that the caller
should break out of the loop.
git-svn-id: https://svn.eduke32.com/eduke32@2183 1a8010ca-5511-0410-912e-c29ae57300e0
to negative numbers. Previously, only checks for being zero were performed,
but CON code in the wild also has WEAPONx_SPAWN -1, which would propagate to
the sprite picnum...
git-svn-id: https://svn.eduke32.com/eduke32@2180 1a8010ca-5511-0410-912e-c29ae57300e0
Usage: press the ['] (quote) modifier together with the PERIOD key.
Aligns only the immediate upper and lower neighbors of each wall that got
aligned by following point2s or nextwalls. Doesn't play well with Alt
(carry over xrepeat) yet, might need two subsequent alignment passes.
git-svn-id: https://svn.eduke32.com/eduke32@2178 1a8010ca-5511-0410-912e-c29ae57300e0
Various code checked for switch tiles in the following manner,
for (ii=0; ii<2; ii++)
switch (DynamicTileMap[sprite[i].picnum-1+ii]) { case SOME_SWITCH: ... }
which blows for picnum 0. Now, we simply disallow it.
git-svn-id: https://svn.eduke32.com/eduke32@2174 1a8010ca-5511-0410-912e-c29ae57300e0
(getzrange, hitscan, clipmove, drawmapview).
They're reproducible with DNE1.3D; Since these angle values most likely come
from CON code, my suggestion would be to bit-and all values representing angles
with 2047 when setting the from CON, but I'd have to think about potential
side-effects of doing this.
git-svn-id: https://svn.eduke32.com/eduke32@2170 1a8010ca-5511-0410-912e-c29ae57300e0
callback 'G_Polymer_UnInit'.
- In astub.c, reset spritelightid to -1 when nulling the spritelightptr of
a sprite (no crashes observed, just precaution)
- In sdlayer.c, catch SIGILLs with our signal handler too, since illegal
instructions are what the instrumented debug builds will execute when
attempting to carry out an undefined (per C) operation.
git-svn-id: https://svn.eduke32.com/eduke32@2169 1a8010ca-5511-0410-912e-c29ae57300e0
How in the name of hell this could pass undetected for so long is a
mystery to me.
git-svn-id: https://svn.eduke32.com/eduke32@2163 1a8010ca-5511-0410-912e-c29ae57300e0
values; check the color index that is potentially gotten from the string to
be printed.
git-svn-id: https://svn.eduke32.com/eduke32@2162 1a8010ca-5511-0410-912e-c29ae57300e0
menu. If some sectors are highlighted, save their indices. The highlighting
of those particular sectors can then be restored at a later time (but careful
across structural modifications that tweak sector indices) by running the same
function. Shares a 'gamearray' with function 'collect_teleporting_sectors',
so the latter will reset this one when run.
git-svn-id: https://svn.eduke32.com/eduke32@2155 1a8010ca-5511-0410-912e-c29ae57300e0
one sector was filled and the 'clear bunch' message was displayed even if the
operation was canceled.
git-svn-id: https://svn.eduke32.com/eduke32@2153 1a8010ca-5511-0410-912e-c29ae57300e0
represents a pointer into the script for label types other than LABEL_DEFINE
instead of checking inclusion of the value in the script bounds. This
assertion was tested with WGR2 SVN.
git-svn-id: https://svn.eduke32.com/eduke32@2150 1a8010ca-5511-0410-912e-c29ae57300e0
them has a different height, print the sectnums of two differing sectors
to so that the mapper can find and examine them with Ctrl-J.
git-svn-id: https://svn.eduke32.com/eduke32@2146 1a8010ca-5511-0410-912e-c29ae57300e0
The texture warping mode will need to be set depending on whether we're
actually drawing a parallaxed sky or not.
git-svn-id: https://svn.eduke32.com/eduke32@2142 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes the vertical (~1 texel wide) stripes that are especially
noticable with tiled art skies and Polymost with r_parallaxskyclamp=1
or Polymer (which always uploads skies with repeating s and t coords).
What constitutes a sky tile is currently hardcoded to be >=78 and <=99.
git-svn-id: https://svn.eduke32.com/eduke32@2141 1a8010ca-5511-0410-912e-c29ae57300e0
and restore_highlighted_sector functions. What this means is that TROR bunches
are now correctly duplicated too (only if all sectors of a given bunch are
highlighted).
git-svn-id: https://svn.eduke32.com/eduke32@2138 1a8010ca-5511-0410-912e-c29ae57300e0
(i.e. first press RAlt, then hold RShift to make it active), consider all
sectors, even the grayed out ones.
This makes 6 modifier keys in 4 categories for RAlt. Can you name them all?
Also spell out the labels that get drawn near the reticle when applying
some of the modifiers and make them not show when not actually selecting
(e.g. pressed RShift alone, but have highlighted sectors)
git-svn-id: https://svn.eduke32.com/eduke32@2137 1a8010ca-5511-0410-912e-c29ae57300e0
that bunches and nextwall links are restores, too. Now, to coalesce two
TROR maps (e.g. for a CBP), one could
do for i allsectors, sethighlightsector i 1
on the console, and then load the 'other' map to copy over the contents
of the first, including all TROR stuff. Note that neither selecting
all sectors with RAlt, nor duplicating them with Insert would lead to
the desired effect (yet).
Internally,
- yax_setbunch() now has different behavior for bunchnums -1, -2 and -3
(it either clears the nextwalls or not)
- build.c has a helper function free_n_ptrs(). This could be handy in
other situations where many blocks of memory must be allocated
consecutively and freed in case of failure
git-svn-id: https://svn.eduke32.com/eduke32@2136 1a8010ca-5511-0410-912e-c29ae57300e0
suboptimal, but at least 'correct' and won't produce the aforementioned
corruptions anymore.
git-svn-id: https://svn.eduke32.com/eduke32@2135 1a8010ca-5511-0410-912e-c29ae57300e0
can be caused by copying map parts from one map to another (or a new one).
The copying system is slightly broken right now....
git-svn-id: https://svn.eduke32.com/eduke32@2133 1a8010ca-5511-0410-912e-c29ae57300e0
next{wall,sector} indices instead of using checksectorpointer() so
that the nextwalls will be restored exactly as they were (provided
that they are copied). Also fix tweaking the sectnums of sprites.
git-svn-id: https://svn.eduke32.com/eduke32@2132 1a8010ca-5511-0410-912e-c29ae57300e0
Called 'loop punching'. In addition to duplicating the loop, the inner
portions of the original and cloned loop are made into a new bunch, and
the loop walls are made to be neighbors, linking their movement to each
other. This gives a way to create island sectors with a differing
bunchnum in the midst of an already extended area.
Usage:
For an extended sector containing a CCW inner loop, select its points
using Ctrl+Shift. Press Ctrl-E to be queried whether to duplicate the
points into the upper or lower extension (even if it's unambiguous).
A number of conditions must be met for a successful 'punch', which
should hopefully be more or less obvious. Among them:
- loop walls should all be red
- the starting wall is only considered among the non-grayed-out ones
- the neighboring sector must not contain points inside or at the loop
git-svn-id: https://svn.eduke32.com/eduke32@2130 1a8010ca-5511-0410-912e-c29ae57300e0
would break out of the 2D mode loop when splitting a sector would exceed
limits.
git-svn-id: https://svn.eduke32.com/eduke32@2129 1a8010ca-5511-0410-912e-c29ae57300e0
- Don't crash when sector joining fails under certain circumstances.
- Increase the point lock (Manhattan) distance from 1/16th to 1/8th
of the grid square length, making it easier to snap to vertices not
lying at the grid points with grid lock on
- When drawing walls, don't snap to any of them except the first drawn
git-svn-id: https://svn.eduke32.com/eduke32@2126 1a8010ca-5511-0410-912e-c29ae57300e0
When having drawn N new points (and having one 'free') and pressing
ENTER, the N line segments between the new points are checked one by
one for intersection with every non-grayed-out wall and a wall vertex
is inserted at every intersecting point. This may be viewed as a
prerequisite for a 'cutter' style tool.
git-svn-id: https://svn.eduke32.com/eduke32@2125 1a8010ca-5511-0410-912e-c29ae57300e0
This function only handles the actual insertion, also taking care of
constrained TROR walls. Anything around the inserting such as backing up
drawn walls or snapping the x/y position to the grid is handled outside.
git-svn-id: https://svn.eduke32.com/eduke32@2123 1a8010ca-5511-0410-912e-c29ae57300e0
The main change consist of adding a key press (and release) callback
whose only purpose is to be used from m32script as EVENT_KEYPRESS.
When entering that event, the RETURN variable will be set to the
keystatus code of the key, and whether it was pressed or released can
be checked by looking at keystatus[] at that code (ifholdkey and
ifhitkey do this). The purpose of this, then, is to be able to remap
keys in a more general (and complicated) fashion than is possible with
the mapster32.cfg 'remap' option. Various other additions build around
this central one:
- add an example EVENT_KEYPRESS to a.m32, among other things emulating
the keypad arrows with Alt-<normal arrows> for notebook convenience;
disabled initially
- a.m32: set 'owner' with Alt-KP2: now Alt-Shift-KP2, because of
collision with the above
- new m32script command: setkey <keycode>, setting keystatus[<keycode>]
to 1 (note: may be restricted to use in EVENT_KEYPRESS only in the
future)
- fix indexing an m32script array with a defined label, there used to
be a 'not a gamevar' error instead
- add the following constant labels for some key codes:
KEY_SCROLL, KEY_F1 .. KEY_F12
git-svn-id: https://svn.eduke32.com/eduke32@2122 1a8010ca-5511-0410-912e-c29ae57300e0
with no highlighted sectors; and when entering 3D mode, even if there are
highlighted sectors. This should have almost no effect, but I find it cleaner
that way.
- Check map for corruption every time an editing change is done. This was
accidentally disabled when commenting out the undo code (which I've yet
to debug).
git-svn-id: https://svn.eduke32.com/eduke32@2121 1a8010ca-5511-0410-912e-c29ae57300e0
of SPACE and C when in side-view mode. Now, this is accomplished by checking
directly in the overheadeditor code.
git-svn-id: https://svn.eduke32.com/eduke32@2119 1a8010ca-5511-0410-912e-c29ae57300e0
selector. This could lead to a crash when OpenGL wasn't initialized before.
git-svn-id: https://svn.eduke32.com/eduke32@2117 1a8010ca-5511-0410-912e-c29ae57300e0
(lazy_tileselector=1 in mapster32.cfg). We're drawing tiles one by one,
so glDrawBuffer(GL_FRONT_AND_BACK) is our friend.
git-svn-id: https://svn.eduke32.com/eduke32@2115 1a8010ca-5511-0410-912e-c29ae57300e0
sector c/f and moving one of them would go beyond the other side (ceilingz >
floorz), don't move any sector c/f at all. When moving only one sector in that
case, move so that ceilingz == floorz.
git-svn-id: https://svn.eduke32.com/eduke32@2112 1a8010ca-5511-0410-912e-c29ae57300e0
Now, if more than one sectors are affected, always move them by the same
amount. That is, if one of them would be sticking against the other side,
don't move the rest. Another change consists of determining the z delta
first, and only then moving the sprites by that amount. This fixes the
problem where you'd e.g. raise a 'floor door' against the ceiling, and the
effector sprites would be raised one time too much, preventing them from
being lowered the next time.
git-svn-id: https://svn.eduke32.com/eduke32@2111 1a8010ca-5511-0410-912e-c29ae57300e0
- new mapster32.cfg and OSD variable 'fixmaponsave_sprites', telling the
editor whether to 'fix' the sprite sectnums on saving and entering 3D
mode. Note that a) sprite sectnums are never fixed when 'script_expertmode'
is enabled, as before, and b) sprites that have out-of-bounds sectnums
are still fixed if a proper sector is found
- if saving and some sprite sectnums have thus been tweaked, inform the
mapper on the status line and print the changes in the OSD
- fix update issue similar to an earlier one: when 'saving as', the astub.c-
based file name is now updated too, so saving with Ctrl-S now saves into
the one save with 'save as' (and not the old one)
- don't attempt to recheck wall pointers from scratch (when saving and running
with -check) if it's a TROR map
git-svn-id: https://svn.eduke32.com/eduke32@2110 1a8010ca-5511-0410-912e-c29ae57300e0
Hopefully this fixes the periodic pausing/unpausing that a few people
have been experiencing.
Also fix build with GCC 3.
git-svn-id: https://svn.eduke32.com/eduke32@2108 1a8010ca-5511-0410-912e-c29ae57300e0
with RAND_MAX > 32767 (everything except Windows?). The 'displayrand' command
now returns values from 0 to 32767 inclusive, across all platforms.
git-svn-id: https://svn.eduke32.com/eduke32@2105 1a8010ca-5511-0410-912e-c29ae57300e0
setactorsoundpitch <actor#> <sound#> <pitchoffset>
which can be used to change the pitch of a playing sound.
The pitch offset has the same meaning as the definesound pitch range endpoints,
i.e. the units are 1/100th of a seminote. Note that just like the random pitch
offset, increasing the pitch makes the sound duration shorter (and vice versa).
git-svn-id: https://svn.eduke32.com/eduke32@2104 1a8010ca-5511-0410-912e-c29ae57300e0
member, so maybe not *that* bad) and an invalid memory access when trying to
access a per-player gamevar in a player-less context (e.g. WGR2 SVN r25
WGR2GAME.CON line 10448).
git-svn-id: https://svn.eduke32.com/eduke32@2102 1a8010ca-5511-0410-912e-c29ae57300e0
playback functions. Without these, there would be an uninitialized access
in line 444 of multivoc.c (if the memory in question was allocated with malloc,
but still...)
git-svn-id: https://svn.eduke32.com/eduke32@2101 1a8010ca-5511-0410-912e-c29ae57300e0
and some VoiceNode struct members with a const, commit forgotten vorbis.c
changes.
git-svn-id: https://svn.eduke32.com/eduke32@2100 1a8010ca-5511-0410-912e-c29ae57300e0
last one + this one:
A couple of tweaks against accidental overwriting of maps.
- first, fix a bug where the map name wasn't reset to 'newboard.map' when starting a
new map
- When saving with Ctrl-S, query the user for confirmation and also show the file name
where the map will be written
- when going into the ESC-menu, print the file name where the map will be written
on pressing 'S' above the '(S)ave' text
git-svn-id: https://svn.eduke32.com/eduke32@2096 1a8010ca-5511-0410-912e-c29ae57300e0
Keep in mind that MUSICANDSFXs with ambient sounds must still have lotags
less than 999 because values >=1000 are used for the amount of reverb.
(999 can't be used because the original code reads '< 999' and I'm not
sure whether it has any special significance... probably not though)
git-svn-id: https://svn.eduke32.com/eduke32@2093 1a8010ca-5511-0410-912e-c29ae57300e0
cursor, query the mapper to pick one. The joining can still fail afterwards,
which makes it only a semi-automatic helper feature.
git-svn-id: https://svn.eduke32.com/eduke32@2092 1a8010ca-5511-0410-912e-c29ae57300e0
allowed circle-walls started on the unconstrained _other_ side of a constrained
wall. Also fix a potential invalid wall access when inserting a point (pretty
serious, that!)
git-svn-id: https://svn.eduke32.com/eduke32@2091 1a8010ca-5511-0410-912e-c29ae57300e0
also for make-circle (C, SPACE). There's still a TROR corruption happening
probably when inserting on constrained walls, but I've yet to get behind the
real cause.
git-svn-id: https://svn.eduke32.com/eduke32@2090 1a8010ca-5511-0410-912e-c29ae57300e0
some wall drawing state is ripped out from overheadeditor() into a
a file-scope struct (even if we don't yet need it there). If the deleting
touches the first drawn point, the walls drawn so far are cleared.
git-svn-id: https://svn.eduke32.com/eduke32@2089 1a8010ca-5511-0410-912e-c29ae57300e0
overheadeditor() by allocating temp variables in the blocks where they
are needed.
git-svn-id: https://svn.eduke32.com/eduke32@2088 1a8010ca-5511-0410-912e-c29ae57300e0
- fix arg checking in checkdefs.sh
- some tilenum and quote ID validation in the CON interpreter
- G_DrawDigiNum and friends: eliminate redundant strlen calls
git-svn-id: https://svn.eduke32.com/eduke32@2086 1a8010ca-5511-0410-912e-c29ae57300e0
ATI cards.
From the time of OpenGL initialization, gamma lookup in classic/fullscreen
will be done in software. Before that, always do a setgamma() after setting the
palette, since this is what resets the HW gamma. However, this may lead to
unappealing artifacts with portions of the scene being sent to the screen with
different gammas.
git-svn-id: https://svn.eduke32.com/eduke32@2085 1a8010ca-5511-0410-912e-c29ae57300e0
add it to the 'all' target instead
source/midi.c: eliminate one 'variable set but not used' warning
git-svn-id: https://svn.eduke32.com/eduke32@2084 1a8010ca-5511-0410-912e-c29ae57300e0
maybe replace them with the proper names.
Usage:
checkdefs.sh <some.def> [[<some_dir>] -patch]
<some_dir> is taken to be the base directory of the search path.
-patch uses 'sed -i' to replace the offending findings
git-svn-id: https://svn.eduke32.com/eduke32@2081 1a8010ca-5511-0410-912e-c29ae57300e0
We pack our own copy of glext.h to avoid build breakages on older environments,
and having gl.h include its own was defeating all that.
git-svn-id: https://svn.eduke32.com/eduke32@2080 1a8010ca-5511-0410-912e-c29ae57300e0
fashion. Among other things, this makes the FOV widening when shrunk
work. User CON code should always check the initial viewingrange value
when attempting to do FOV effects like zoom, because it is not guaranteed
to be 65536 due to different screen aspect ratios etc.
git-svn-id: https://svn.eduke32.com/eduke32@2078 1a8010ca-5511-0410-912e-c29ae57300e0
First, when pressing 'S on signed members (like the shade), display
the real signed value instead of the value cast to an unsigned type.
Second, when aiming at an overwall and pressing G, affect the overwall
instead of the wall. Maybe these changes affect a few other queries too...
git-svn-id: https://svn.eduke32.com/eduke32@2077 1a8010ca-5511-0410-912e-c29ae57300e0
ceilings or floors. In such cases, you're not squished unconditionally (instead
of fetching the ceiling or floor height of the neighbor sector), but TROR isn't
meant for small-scale RoR anyway.
git-svn-id: https://svn.eduke32.com/eduke32@2071 1a8010ca-5511-0410-912e-c29ae57300e0
polymer_addlight(). I have no idea whether it's the 'right' thing,
but it fixes this:
Conditional jump or move depends on uninitialised value(s)
at polymer_updatelights (polymer.c:5090)
by polymer_drawrooms (polymer.c:938)
. . .
Uninitialised value was created by a stack allocation
at loadmaphack (engine.c:9482)
Fix another uninitialized access when rendering jpegs.
git-svn-id: https://svn.eduke32.com/eduke32@2069 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes a crash when loading a map afterwards.
Tweak a few debugging messages and some whitespace.
git-svn-id: https://svn.eduke32.com/eduke32@2068 1a8010ca-5511-0410-912e-c29ae57300e0
Also move a 'int16_t editstatus' declaration from polymost.c to engine_priv.h.
git-svn-id: https://svn.eduke32.com/eduke32@2066 1a8010ca-5511-0410-912e-c29ae57300e0
My choice of solution is simply to add an extra set of values duplicating the previous five because doing so would definitely show the user no changes. I could have tinkered with the messy loop where the out-of-bounds references are made but there is no guarantee I could have succeeded or kept compatibility.
git-svn-id: https://svn.eduke32.com/eduke32@2061 1a8010ca-5511-0410-912e-c29ae57300e0
Getting the texture handles without requiring invalidation means we can
handle ART-animating tilenums without impacting performance too much.
git-svn-id: https://svn.eduke32.com/eduke32@2058 1a8010ca-5511-0410-912e-c29ae57300e0
Polymer has a hack that snaps horiz values of spotlights between 90 and 110
to 90 and 110 to avoid triggering aliasing artifacts with perfectly horizontal
spotlights. Propagate that change all the way to the spotlight SE sprite so
that the code won't think that the horiz is always different from the light
and mark it invalid each frame.
git-svn-id: https://svn.eduke32.com/eduke32@2057 1a8010ca-5511-0410-912e-c29ae57300e0
This won't actually do anything until the a debug bit is added when
creating the context, but that requires support for GLX_create_context
which SDL doesn't support. I'll add support for WGL_create_context to
winlayer in a bit as a stopgap.
Also updates our local copy of glext.h with a fresh one from the
Khronos registry.
git-svn-id: https://svn.eduke32.com/eduke32@2056 1a8010ca-5511-0410-912e-c29ae57300e0
We need to Y-invert the projection texcoords when sampling
from the lightmap.
git-svn-id: https://svn.eduke32.com/eduke32@2055 1a8010ca-5511-0410-912e-c29ae57300e0
Sprites would stick with their old material on global palette change.
This goes through all prsprites and clobbers their CRCs so that an
alternate skin / tint / highpal can be applied accordingly.
git-svn-id: https://svn.eduke32.com/eduke32@2053 1a8010ca-5511-0410-912e-c29ae57300e0
The winding order of faces is different if only flipping about X or Y,
and we were unconditionally culling CW faces.
git-svn-id: https://svn.eduke32.com/eduke32@2052 1a8010ca-5511-0410-912e-c29ae57300e0
the nextwall pointers correctly; Add some 'asksave=1' and 'make old-nextwalls
invalid'.
git-svn-id: https://svn.eduke32.com/eduke32@2048 1a8010ca-5511-0410-912e-c29ae57300e0
