It's mostly taking over the NASM code, with a couple of changes:
- declarations for externals and globals are slightly different
- the masm seems to have e.g. "dword ptr [...]" where the nasm has only
"dword [...]", though the masm also has a couple of the latter. The "ptr"
modifier seems kinda redundant to me, but I added it to every indirection
anyway.
git-svn-id: https://svn.eduke32.com/eduke32@3033 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, we used them in our builds for sprites, but MSVC builds don't have
the ASM ported to MASM, and thus the workaround of ignoring the linking errors
was not safe.
git-svn-id: https://svn.eduke32.com/eduke32@3031 1a8010ca-5511-0410-912e-c29ae57300e0
Hendricks found a bug caused by that commit, so this one enables exprimentation
with setbrightness() bit 1 behavior.
git-svn-id: https://svn.eduke32.com/eduke32@3025 1a8010ca-5511-0410-912e-c29ae57300e0
See the comment in source/osdcmds.c for instructions on its usage.
git-svn-id: https://svn.eduke32.com/eduke32@3021 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the splitscreen mod not have a ridiculous view distortion.
Such scenes will have no correction for non-square pixels, though.
git-svn-id: https://svn.eduke32.com/eduke32@3020 1a8010ca-5511-0410-912e-c29ae57300e0
A new function maybe_append_ext() is added to common.c and used in the handling
of the -d<demo.edm> cmdline parameter and the 'map' OSD command with one
non-wildcard arg. (It's slightly different from the way the extension was
maybe-appended previously.)
git-svn-id: https://svn.eduke32.com/eduke32@3004 1a8010ca-5511-0410-912e-c29ae57300e0
A macro MAYBE_FCLOSE_AND_NULL(fileptr) is introduced in compat.h that does
what it says.
git-svn-id: https://svn.eduke32.com/eduke32@2995 1a8010ca-5511-0410-912e-c29ae57300e0
This trims four 4k pages of code from the release EDuke32 build and
one page from Mapster32.
git-svn-id: https://svn.eduke32.com/eduke32@2991 1a8010ca-5511-0410-912e-c29ae57300e0
When this happens, parallaxmodes other than 0 will be unavailable and silently
draw as parallaxmode 0. This usually happens with extremely wide resolutions.
git-svn-id: https://svn.eduke32.com/eduke32@2990 1a8010ca-5511-0410-912e-c29ae57300e0
We're pulling stuff from math.h even in non-GL builds right now, so
adding libc's sin() and atan() doesn't seem like a big deal. In the
unlikely event that their accuracy is so bad that the calculated tables
don't match the original ones, a warning is issued on little-endian
platforms.
git-svn-id: https://svn.eduke32.com/eduke32@2988 1a8010ca-5511-0410-912e-c29ae57300e0
For reference, they are the following:
- cache1d.c: suckcache()
- build.c: compare_wall_coords()
- make switch-invisible heuristic
- Mapster32: old sprite search
- Mapster32: manual z range
- m32script: read/writearray, qgetsysstr
- menus.c: savetemp()
git-svn-id: https://svn.eduke32.com/eduke32@2981 1a8010ca-5511-0410-912e-c29ae57300e0
This is really an artifact of overloading the sector fields for different uses.
For copy-pasting TROR'd portions, the bug still persists.
git-svn-id: https://svn.eduke32.com/eduke32@2963 1a8010ca-5511-0410-912e-c29ae57300e0
A debug macro to test tints being stuck at the least intense non-zero value
is provided in engine.c.
git-svn-id: https://svn.eduke32.com/eduke32@2952 1a8010ca-5511-0410-912e-c29ae57300e0
Because rotating sectors "smoothly" by 1 BUILD ang will quickly accumulate
roundoff error, this lets the user first do that as a preview and then use the
manual angle rotation do carry it out for real.
git-svn-id: https://svn.eduke32.com/eduke32@2942 1a8010ca-5511-0410-912e-c29ae57300e0
ROTATESPRITE_MAX is moved to build.h and all orientation bits from CON commands
using rotatesprite are ANDed with (ROTATESPRITE_MAX-1). Some of the functions
use ROTATESPRITE_MAX for different internal purposes, which will not be exposed
to CON now (a good thing). Also, dorotspr_handle_bit2 is made clearer.
git-svn-id: https://svn.eduke32.com/eduke32@2929 1a8010ca-5511-0410-912e-c29ae57300e0
The black translucent background underneath the user map list will now
be drawn with a shade 32 tile 0 instead of tile BLANK, since I've seen
the latter being replaced in some mod. Also, it will look the same
regardless of screen aspect.
git-svn-id: https://svn.eduke32.com/eduke32@2928 1a8010ca-5511-0410-912e-c29ae57300e0
Don't call setaspect from them, because the only thing that's needed is
(in classic) yxaspect and xyaspect. Pass these from the helper function
defined earlier instead.
git-svn-id: https://svn.eduke32.com/eduke32@2921 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes stuff like the HUD chaingun with widescreen and small "screen sizes"
(in-game viewport). It also makes rotatesprite behave more like classic overall.
I have no idea why it was there in the first place.
git-svn-id: https://svn.eduke32.com/eduke32@2918 1a8010ca-5511-0410-912e-c29ae57300e0
setaspect(), which is called by setaspect_new, already uses the *dimen variables,
so it's the same thing done twice. Now, a change from the original full status
bar to the original mini status bar keeps the horizontal FOV again and only
bumps the view a little higher, as with the classic aspect determination.
git-svn-id: https://svn.eduke32.com/eduke32@2913 1a8010ca-5511-0410-912e-c29ae57300e0
This means that classic and the GL modes now look the same as far as e.g.
hud_bgstretch or HUD weapons are concerned.
git-svn-id: https://svn.eduke32.com/eduke32@2911 1a8010ca-5511-0410-912e-c29ae57300e0
Instead of setting and resetting the [xy]dim globals, use them as locals
in a block (shadowing the globals). Also, do some common subexpression
elimination for clarity.
git-svn-id: https://svn.eduke32.com/eduke32@2908 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the code rather more readable in some places. Unlike the two
preceding commits, this one is actually purely textual replacement.
git-svn-id: https://svn.eduke32.com/eduke32@2877 1a8010ca-5511-0410-912e-c29ae57300e0
The build script now has two more presets: helix and installtools
(which was previously attempted after the build; untested). Also,
- when detecting git, run commands such that the SVN repo isn't accessed
- package kextract, kgroup and arttool into tools/ in the zip
- try to exit on failure in some places, though that doesn't seem to work
git-svn-id: https://svn.eduke32.com/eduke32@2852 1a8010ca-5511-0410-912e-c29ae57300e0
The idiv instruction also signals an FPE when the resulting *signed* quotient
overflows, so we simply use div instead.
git-svn-id: https://svn.eduke32.com/eduke32@2850 1a8010ca-5511-0410-912e-c29ae57300e0
These could manifest themselves as garbage lines on the bottom and
happened because of the ydim vs. bytesperline discrepancy again.
git-svn-id: https://svn.eduke32.com/eduke32@2844 1a8010ca-5511-0410-912e-c29ae57300e0
Instructions on how I built the libs are in Windows/src/minipng.dfa.
git-svn-id: https://svn.eduke32.com/eduke32@2843 1a8010ca-5511-0410-912e-c29ae57300e0
This changes a constant inside the panning calculation from 256 to 255 (making
e.g. panning 255 and 0 the same in the "San Andreas fault" sign in E1L5) and
uses the correct reference wall for the "do panning correction?" conditional.
Now, the problematic walls should look the same as in Polymost.
git-svn-id: https://svn.eduke32.com/eduke32@2822 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the corrections conditional on where they appear in (under-, over-,
white or mask wall).
git-svn-id: https://svn.eduke32.com/eduke32@2821 1a8010ca-5511-0410-912e-c29ae57300e0
I'm willing to make this one concession to correctness in the name of backward-
compatibility. I think that one reason why this has never cause a crash is that
tiles in BUILD are allocated in Ken's big allocache buffer, so oob accesses were
dampened by that (though they hit uninitialized data).
git-svn-id: https://svn.eduke32.com/eduke32@2819 1a8010ca-5511-0410-912e-c29ae57300e0
The event is run after drawing the scene, but before the overlays. To
make a screenshot from a script, set DOSCRSHOT to non-zero. It will then
be scheduled to run once after the drawing but before the above-mentioned
event. The screenshots will be called mcapXXXX.{png,tga}.
git-svn-id: https://svn.eduke32.com/eduke32@2818 1a8010ca-5511-0410-912e-c29ae57300e0
This would only hit when polymost_printext256 erred out (mem alloc failure,
glGenTextures failure), i.e. "almost never".
Also, tweak a bound check in polymost_printext256.
git-svn-id: https://svn.eduke32.com/eduke32@2817 1a8010ca-5511-0410-912e-c29ae57300e0
Non-pow2 wall/mask drawing in classic introduced cases where walls are
drawn "incorrectly" because they were constructed with the old behavior
in mind. Polymer appears to "correct" for it partially, but doesn't cover
all cases. Specifically, now we have:
- E1L1 first inside secret room (5000, 50000): Polymer draws like Duke 1.5,
classic now draws with an offset.
- E3L2 near the vault (-20000, 25000): both classic and Polymer draw with
offsets compared to Duke 1.5, but they're different!
This means that more research is needed into what makes these two cases
diverge, even though both have the same root cause.
!!! Also, mappers should abstain from using non-power-of two textures on
walls until this issue is resolved in a satisfactory fashion !!!
git-svn-id: https://svn.eduke32.com/eduke32@2811 1a8010ca-5511-0410-912e-c29ae57300e0
This was introduced with r2771, which fixed e.g. AMC TC city_si's mirrors,
but instructed the base drawrooms inside yax_drawrooms to not correct the
passed sectnum. Therefore, stuff would get drawn wrongly when passing
sector boundaries, like from the platform to the rails in trueror1.map.
git-svn-id: https://svn.eduke32.com/eduke32@2810 1a8010ca-5511-0410-912e-c29ae57300e0
The latter is commented out, since it has to be *compiled* with
script_expertmode enabled.
git-svn-id: https://svn.eduke32.com/eduke32@2808 1a8010ca-5511-0410-912e-c29ae57300e0
Related to that, it looks like out-of-bounds accesses when drawing such walls/
maskwalls or *sprites* are fixed, too. Sprites still show a stray lines on some
occasions, but Valgrind doesn't complain then.
git-svn-id: https://svn.eduke32.com/eduke32@2805 1a8010ca-5511-0410-912e-c29ae57300e0
-Wwrite-strings is useful to detect code where string literals and e.g. alloc'd
strings are used side-by-side, potentially creating dangerous situations, or to
find uses of old, non-constified APIs. However, enabling it would still flood
the log with too many warnings. Also, GCC wrongly warns for initializations of
char arrays.
git-svn-id: https://svn.eduke32.com/eduke32@2796 1a8010ca-5511-0410-912e-c29ae57300e0
uhypsq calculates the hypotenuse using unsigned multiplication. This is
permissible since for arbitrary int32s a and b, the following holds in
two's complement arithmetic:
(int32_t)((uint32_t)a * b) == (int32_t)((int64_t)a * b)
("Signed and unsigned multiplication is the same on the bit level.")
This fixes various overflows where wall lengths for walls of length > 46340
are calculated, but does not rid us of other overflows in the same vein
(usually dot products between vectors where one point is a wall vertex and
the other a position in a sector).
git-svn-id: https://svn.eduke32.com/eduke32@2791 1a8010ca-5511-0410-912e-c29ae57300e0
That is, "clang -ftrapv" builds don't abort almost immediately after entering
a level.
There are various classes of overflow bugs, needing different handling:
- Some texture mapping code was written with signed integer wrapping semantics
in mind. In some places, we're able to get away with unsigned casts.
- sometimes, we really need a wider range, like when calculating distances or
dot products
- negating INT_MIN. Here, we cast to int64_t temporarily. Note that if the
result is 32-bit wide, no 64-bit code may actually need to be generated.
- shifting into a signed integer's sign bit. We cast to uint32 here.
- in hitscan(), at the "abyss crash prevention code" comment, it's clearly
the other code that is better...
This is not merely done for pedantry, but rather makes it easier to track down
overflow bugs having a real impact on the game.
git-svn-id: https://svn.eduke32.com/eduke32@2784 1a8010ca-5511-0410-912e-c29ae57300e0
For SDL 1.2 and when building on linux, the code using
clock_gettime(CLOCK_MONOTINIC, ...) is taken over from SDL HG.
gethitickms() is a convenience function that return milliseconds as
doubles and isn't exposed in any header file, yet.
git-svn-id: https://svn.eduke32.com/eduke32@2778 1a8010ca-5511-0410-912e-c29ae57300e0
Doesn't work: indexed-color modes, gamma (at least for X11), mouse wheel,
special keys like ENTER or BACKSPACE in the OSD, probably more...
In build/Makefile.shared, we now have logic to autodetect an SDL2 installed
in /usr/local, however OS X and Wii builds follow other Makefile code paths,
it seems. Note that the matching SDL2_mixer must be used then, too.
In source/jaudiolib/src/driver_sdl.c, change the #includes from <SDL/SDL_xxx.h>
to "SDL_xxx.h". SDL wiki says this is the most portable way, hopefully this
doesn't break builds for anyone.
git-svn-id: https://svn.eduke32.com/eduke32@2777 1a8010ca-5511-0410-912e-c29ae57300e0
This was actually broken all the time except when ALL sectors were selected
(which was what I tested incidentally when I wrote the first "fix"). D'oh!
git-svn-id: https://svn.eduke32.com/eduke32@2773 1a8010ca-5511-0410-912e-c29ae57300e0
It's time to replace some int32s with 64-bit ints in core engine functions.
The problem is that for example, the dot product is taken between vectors that
may be the difference between two arbitrary points in a sector, so even if one
sticks to the "no blue walls" rule, that doesn't guarantee freedom from
overflows.
git-svn-id: https://svn.eduke32.com/eduke32@2761 1a8010ca-5511-0410-912e-c29ae57300e0
This is to not slow down the core drawing functions too much in debugging builds
and mimics the way things are on x86.
git-svn-id: https://svn.eduke32.com/eduke32@2755 1a8010ca-5511-0410-912e-c29ae57300e0
Bang! One more invalid internals exposure squashed. Maybe one day we'll be able
to call EDuke32 "stable"...
Actually the offending sprite IS drawn as face sprite with shade 32 and xrepeat
and yrepeat 255 for the convenience of the CON coder who will have to debug it.
git-svn-id: https://svn.eduke32.com/eduke32@2744 1a8010ca-5511-0410-912e-c29ae57300e0
Those were happening when wall drawing in an upper/lower layer "closed" too
much of the "curtain" (umost/dmost) for subsequent drawing in that portal.
Example: looking down the sewer manhole at the beginning of Retaliation will
now render without HOM.
git-svn-id: https://svn.eduke32.com/eduke32@2739 1a8010ca-5511-0410-912e-c29ae57300e0
New Wii control defaults for the Wii Remote + Nunchuk and the Classic Controller. This includes new code added just so that the Home key brings up the menu in-game, reducing the need for a USB keyboard.
On the technical side, raw joystick access (comparable to what is available for keyboard and mouse) is now present in jmact, on the game side. (added: joystick.[ch])
Using this new raw joystick access, I replaced tueidj's hack to map A and B to LMB/RMB and D-Pad Up/Down to the scrollwheel.
I made the menus more friendly to mouse and joystick browsing by adding and unifying checks and clears for various buttons and gamefuncs. In fact, the majority of the time spent on this commit was tracking down problems that appeared with the factoring and trying to understand the menu system and the way input checks are precariously executed.
In addition, "Press any key or button to continue" now truly means what it says.
As a result of incorporating proper raw access into control.c instead of it directly accessing the implementaiton, the program *may* no longer be affected by joystick input when it is out of focus. This follows the pattern set by the mouse, and I think this is a positive change.
A small bonus: In the classic/old keyboard preset, the key for Show_Console has been changed from '`' to 'C' because '`' is taken by Quick_Kick.
git-svn-id: https://svn.eduke32.com/eduke32@2728 1a8010ca-5511-0410-912e-c29ae57300e0
NAM and Napalm can now share their con, def, and rts files if the one for their respective game is not present because the con and rts files are identical.
Also, decapitalize two string literals missed in r2540.
git-svn-id: https://svn.eduke32.com/eduke32@2726 1a8010ca-5511-0410-912e-c29ae57300e0
This introduces a Makefile variable EDUKE32_MY_DEVELOPER_ID, which is
expected to come from the environment, so that minor disagreements/
preferences can be handled -- don't let it go overboard though! -- to keep
the working directory clean of stuff that one doesn't actually work on.
My ID is 805120924, i.e. "helix".
git-svn-id: https://svn.eduke32.com/eduke32@2718 1a8010ca-5511-0410-912e-c29ae57300e0
Usage is from 3D mode only. When a sector (or wall) is committed to the
clipboard, it (or the wall's sector) is saved, and is subsequently used
when auto-aligning [;-ENTER] another sector's ceiling or floor against the
reference one's. This temp. sector is reset on any structurally modifying
operation except setting first walls; also, aligning extended ceilings or
floors is impossible as they use .*xrepeat internally.
The auto-alignment does not change picnums (this can be accomplished with
the ['+ENTER] combination), but copies the orientation bits 2^{2..6} to the
alignee. Afterwards, if the reference is relative-aligned, it tweaks them,
so that every case where the two firstwalls are either parallel or perpendi-
cular is handled correctly.
It does not yet calculate the panning values.
git-svn-id: https://svn.eduke32.com/eduke32@2715 1a8010ca-5511-0410-912e-c29ae57300e0
This is so that people know where to enable it. One day, all these
debugging switches ought to go into the Makefiles in one form or
another.
git-svn-id: https://svn.eduke32.com/eduke32@2714 1a8010ca-5511-0410-912e-c29ae57300e0
It works perfectly fine without it for me, and including it for no reason
is just an annoyance to other people building from source.
git-svn-id: https://svn.eduke32.com/eduke32@2708 1a8010ca-5511-0410-912e-c29ae57300e0
Defines SPRITES_OF(Statnum, Iter) and SPRITES_OF_SECT(Sectnum, Iter)
[The first is so that STAT_* can be substituted for Iter and it reads nicely.]
Usage should be self-explanatory, but one thing to keep in mind is that
the sprites that are iterated over MUST NOT be deleted.
git-svn-id: https://svn.eduke32.com/eduke32@2707 1a8010ca-5511-0410-912e-c29ae57300e0
vbit was being accessed with an int32 e.g. at address 3200 when only 3203 were
allocated. We simply alloc +1 byte.
git-svn-id: https://svn.eduke32.com/eduke32@2705 1a8010ca-5511-0410-912e-c29ae57300e0
The first means that the expensive (~0.5 ms) SHGetFileInfo() calls won't inter-
fere with smooth gameplay, but files that are opened only at game-time like
sounds won't be checked. The second means that there are now less false
positives, i.e. warnings about files that would be found due to the
check-all-{upper,lower} hack.
git-svn-id: https://svn.eduke32.com/eduke32@2702 1a8010ca-5511-0410-912e-c29ae57300e0
Also, correct the loadboard() return value checks in premap.c to be
aware of a returned -2 ("wrong map version").
git-svn-id: https://svn.eduke32.com/eduke32@2694 1a8010ca-5511-0410-912e-c29ae57300e0
Most of the time, Windows file name lookup is case-insensitive. Reading the
docs (see MSDN's CreateFile help, for example), it seems like case-sensitivity
can be controlled on a per-file basis where applicable (NTFS), but people
should be concerned about matching case in the DEFs/on disk *especially* in
that case.
Also, note that this hack will not always help on systems with case-sensitive
lookup.
git-svn-id: https://svn.eduke32.com/eduke32@2693 1a8010ca-5511-0410-912e-c29ae57300e0
When a file from the local file system is opened, its real file name is gotten
with SHGetFileInfo() and compared against the one that was passed. In the case
they're not identical, a warning is issued.
This is one step towards eliminating mismatched file names in DEFs etc., which
cause trouble on systems that look them up case-sensitively. However, it's not
perfect because the issue is trickier than it appears on first sight.
For one thing, this will only check the last (i.e. file) part in the path,
falsely accepting mismatched directory names. However for these, it reports
them ruthlessly, even for those names where the try-other-case hack (try all
uppercase, all lowercase) would find the correctly-cased file.
git-svn-id: https://svn.eduke32.com/eduke32@2692 1a8010ca-5511-0410-912e-c29ae57300e0
Note: You may encounter a crash if you try to test your map and Mapster32 is running fullscreen.
git-svn-id: https://svn.eduke32.com/eduke32@2684 1a8010ca-5511-0410-912e-c29ae57300e0
This should be more correct, since previously, the saved PNGs were way too
contrasty when looked from within a browser. Now, they'll always be
slightly darker than in-game (assuming one has a gamma greater than 1).
git-svn-id: https://svn.eduke32.com/eduke32@2673 1a8010ca-5511-0410-912e-c29ae57300e0
- Make MAXXDIM and MAXYDIM macros be 860 and 490, respectively. tueidj says
max. screen size is 848x480, but there are oob access bugs in the classic
renderer when running with the maximum possible resolution
- don't allocate additional sector/wall storage for Mapster (saves ~16k)
- Add ud.config.UseJoystick = 1 in config.c, but make it conditional on Wii
- remove one comment I no longer believe true, add one TODO comment
git-svn-id: https://svn.eduke32.com/eduke32@2645 1a8010ca-5511-0410-912e-c29ae57300e0
Among other things, comment out very seldomly (or not at all)
used sprite member macros: SV, ZV, RX, RY, CX, CY, CD, PL.
git-svn-id: https://svn.eduke32.com/eduke32@2639 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, we checked whether the faded palette has changed (by way of CRC)
and invalidated the textures then unless the preserve flags were set. This
however could lead to wrongly invalidating them under unfortunate circumstances,
e.g. basepal change from CON + tints at the same time before r2620 which
reverted r2232.
Now, only invalidate them if the corresponding preserve flags are clear AND
* the base palette has really changed OR
* the palette CRC changed and we were running on software gamma
The latter means that performance-killing invalidations may still happen on
GL platforms lacking HW gamma (for ATI, it's currently only disabled in 8-bit
fullscreen).
Also have a new global 'basepalreset' to fake a basepal change for
setbrightness(), currently used when changing renderers so that going from
Polymer to Polymost and back again will invalidate the Polymer textures
on the second change, potentially re-applying a basepal highpal. (Still
with me?)
git-svn-id: https://svn.eduke32.com/eduke32@2636 1a8010ca-5511-0410-912e-c29ae57300e0
This was fixed with the preceding change; software mode will now always use
software gamma if an ATI/AMD card is detected.
git-svn-id: https://svn.eduke32.com/eduke32@2634 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, I knew no way of querying for graphics adapter vendors/names from
anything other than OpenGL. Googling revealed a way to do this with the
Windows API.
git-svn-id: https://svn.eduke32.com/eduke32@2633 1a8010ca-5511-0410-912e-c29ae57300e0
This part is a mixture of the original patch and my changes. It seems like
tueidj had some trouble
1) getting OGG to work, which is why it's conditionally compiled out
2) struggling with endianness with the mixing routines? This may be also
due to him missing to define two others BIGENDIAN macros (our code is
in need of cleanup there). Note the change in jaudiolib/src/mix.c!
Because I added my share to this part, I might have actually broken sound
mixing on big-endian platforms.
git-svn-id: https://svn.eduke32.com/eduke32@2630 1a8010ca-5511-0410-912e-c29ae57300e0
On the Wii, V7 (i.e. original) map limits are used and the maximum screen size
is 1600x1200.
git-svn-id: https://svn.eduke32.com/eduke32@2629 1a8010ca-5511-0410-912e-c29ae57300e0
- conditionally compiles out some code intended for the PC platforms
- compat.c: get home directory routine, access() implementation
- game.c: don't use ioctl(), lower cache1d size to 8 MiB, Wii-specific
initialization code and application directory ("apps/eduke32")
git-svn-id: https://svn.eduke32.com/eduke32@2628 1a8010ca-5511-0410-912e-c29ae57300e0
For the Wii, SDL's mutex functionality is used. The implementation in the
original patch was wrong though, so this part required non-trivial changes.
git-svn-id: https://svn.eduke32.com/eduke32@2626 1a8010ca-5511-0410-912e-c29ae57300e0
- sdlayer.c: custom "get joystick button names" routine
- jmact/mouse.c: packs some joystick events into the value returned by
MOUSE_GetButtons(): bits used are 256, 512, 4096, 8192
- MOUSE_Init() --> Mouse_Init(), presumably because of a name clash?
- comments out right-shift of joystick analog values by 5, maybe this fixes
the scale problems with the joystick on the PC too?
git-svn-id: https://svn.eduke32.com/eduke32@2624 1a8010ca-5511-0410-912e-c29ae57300e0
I didn't add Makefile.common, because it needs to be made conditional.
git-svn-id: https://svn.eduke32.com/eduke32@2622 1a8010ca-5511-0410-912e-c29ae57300e0
The original patch was communicated to me by Hendricks, but since it didn't
apply cleanly (it's based on r2182) I took the liberty of slightly messing
with it for inclusion into EDuke32.
Info: http://wiibrew.org/wiki/User:Tueidj/Duke3D
This first part (which wasn't changed from the original patch) implements
scaling arithmetic and miscellaneous pragmas, some in PPC assembly and a part
of them in C. Of some interest is the fact that the Wii processor apparently
lacks support for 64-bit integers, so divscale() uses floating-point math.
git-svn-id: https://svn.eduke32.com/eduke32@2621 1a8010ca-5511-0410-912e-c29ae57300e0
Because gltexinvalidate*() could be called too often when setgamepalette is used
while having a tint overlaid else. Pending thorough analysis/reworking of the
32-bit mode base palette handling / texture invalidation.
git-svn-id: https://svn.eduke32.com/eduke32@2620 1a8010ca-5511-0410-912e-c29ae57300e0
That is, have a second loop over all models run for each deleted tex and
null the texname. This is ugly, sure, but it's better than calling
glDeleteTextures on stale names.
git-svn-id: https://svn.eduke32.com/eduke32@2619 1a8010ca-5511-0410-912e-c29ae57300e0
Specifically, it was in the "determine searchwall when aiming at floor or
ceiling" part. Now, if prsectors[]->ceil.plane (or ->floor.plane) is NULL,
we set the searchwall to the sector's firstwall and return.
git-svn-id: https://svn.eduke32.com/eduke32@2610 1a8010ca-5511-0410-912e-c29ae57300e0
This has been there since searchbottomwall introduction in r1466.
git-svn-id: https://svn.eduke32.com/eduke32@2604 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, we only set the viewingrange according to the physical screen's
dimensions, but didn't correct yxaspect for a potential non-square pixel
ratio.
git-svn-id: https://svn.eduke32.com/eduke32@2603 1a8010ca-5511-0410-912e-c29ae57300e0
Consequently, it's not saved as a setting in either the game or editor
config files. We do this by calling "GetSystemMetrics(SM_CXSCREEN)"
(accordingly for y) and calculating the cvar by dividing common factors,
since it has to be in the form WWHH. This may fail for _really_ strange
screen dimensions, so a log message is printed at the very beginning.
git-svn-id: https://svn.eduke32.com/eduke32@2601 1a8010ca-5511-0410-912e-c29ae57300e0
Because this doesn't even seem to work on XP, we're being spammed with
DDERR_SURFACELOST messages...
git-svn-id: https://svn.eduke32.com/eduke32@2600 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, it was possible to leave a sector with less than three walls if
a point got deleted transitively by a TROR link. Now, a proper check is done
for all deletion candidates and a message stating which wall and sector is
problematic is printed. Thanks for Diaz for pointing out the brokenness.
git-svn-id: https://svn.eduke32.com/eduke32@2599 1a8010ca-5511-0410-912e-c29ae57300e0
- factor out many identical checks in a convenient function; some messages
may read slightly differently now and tile ranges may be handled more strictly
(error out if one of the limits is invalid)
- factor out two instances of identical (up to one arg) code into
tile_from_truecolpic
- factor out setting picsiz[] and stuff into set_picsizanm
- some checks
- Make "undefmodelof" non-functional and warn.
- in "animtilerange", if the tile difference is >= 64, error out since we
can't store it in picanm[]
git-svn-id: https://svn.eduke32.com/eduke32@2588 1a8010ca-5511-0410-912e-c29ae57300e0
Allow all drivers for now; if anything, we should start maintaining a
blacklist now that most Intel chips have decent enough support to be
able to run stuff satisfactorily.
git-svn-id: https://svn.eduke32.com/eduke32@2580 1a8010ca-5511-0410-912e-c29ae57300e0
This requires one tweak in drawrooms' umost/dmost setup to prevent oob access.
Specifically, a coordinate difference of 0 is allowed. In the classic renderer,
this would mean a one-pixel (real screen coords) height or width. In Polymost,
it would currently mean a one-pixel height and zero-pixel width, but this might
be subject to change.
git-svn-id: https://svn.eduke32.com/eduke32@2574 1a8010ca-5511-0410-912e-c29ae57300e0
(That is, the base shade table.) Before, we allocated each palookup buffer.
For a vanilla setup, this means that we're now saving 224*32*256 ~= 1.8 megs,
which might be interesting for low-memory gadgets.
git-svn-id: https://svn.eduke32.com/eduke32@2571 1a8010ca-5511-0410-912e-c29ae57300e0
First, it's unlikely in our day and age. Second, they're always free'd at the end,
so allocache'ing them is incorrect.
git-svn-id: https://svn.eduke32.com/eduke32@2570 1a8010ca-5511-0410-912e-c29ae57300e0
Also,
- use this in game.c and astub.c palookup loading code
- when makepalookup() is passed a 0 palnum, return early. This means that
'fogpal' will silently fail when attempting to change pal 0.
- in 'makepalookup' DEF command, error out if passed a pal of 0.
git-svn-id: https://svn.eduke32.com/eduke32@2569 1a8010ca-5511-0410-912e-c29ae57300e0
The syntax is as follows:
makepalookup { <token-list...> }
where valid tokens are
* pal <palnum>: the palette number, 1 .. 250
* red <num>, green, blue (or r, g, b): the fog color components on a 0 to 63 scale.
Components that are not present are assumed to be 0.
* remappal <palnum>: the palette number to take the index remapping from, i.e. 21
for blue -> red. When absent, defaults to 0.
* remapself: when present, specifies that the remappal is the same as the 'pal'.
This is to prevent textual redundancy when overwriting existing palookups.
Examples (best tested with tile #251):
1) makepalookup { pal 200 red 30 remappal 23 }
This creates palookup 200 with a fog of (30,0,0) and a blue-to-yellow remapping
(assuming it has not been changed before)
2) makepalookup { pal 21 red 30 remapself }
This 'fogifies' palookup 21 with a red fog.
3) makepalookup { pal 21 red 30 }
This overwrites palookup 21 with a red fog, but clears the blue-to-red remapping.
The fog aspect of this command affects the GL modes just like 'fogpal', but the
remapping has no effect for hightiles.
- Also, silently clamp 'fogpal' r,g,b values to the range 0 .. 63.
git-svn-id: https://svn.eduke32.com/eduke32@2568 1a8010ca-5511-0410-912e-c29ae57300e0
It allocates a buffer of size BMAX_PATH and copies the passed string into it.
git-svn-id: https://svn.eduke32.com/eduke32@2560 1a8010ca-5511-0410-912e-c29ae57300e0
Don't actually replace the instances in the code now.
Additions in common.h:
- fnlist_t, which combines CACHE1D_FIND_REC *finddirs, *findfiles and
int32_t numdirs, numfiles
- the FNLIST_INITIALIZER macro, which MUST be used for automatic variables
- fnlist_clearnames, fnlist_getnames functions
- G_LoadGroupsInDir, G_DoAutoload, two often-occurring uses of these
git-svn-id: https://svn.eduke32.com/eduke32@2555 1a8010ca-5511-0410-912e-c29ae57300e0
Alongside, these make into into the header:
- the 'tokenlist' type (a typedef'd struct)
- the T_EOF and T_ERROR enumeration values
git-svn-id: https://svn.eduke32.com/eduke32@2549 1a8010ca-5511-0410-912e-c29ae57300e0
As inauguration, move G_AddGroup, G_AddPath and struct strllist there.
The header is located in build/include, because in the future, code that resides
closer to (but is not strictly part of) the engine might need to be factored
into here. The source file, however, is in the source/ directory.
git-svn-id: https://svn.eduke32.com/eduke32@2542 1a8010ca-5511-0410-912e-c29ae57300e0
- Help window text cleaned and made more consistent between game and editor
- Added help entry for "-clipmap"
- Log text for using CON, DEF, and RTS files has been made consistent
- All instances of '%s' have been replaced with \"%s\" because ' is a valid filename character. (At least on Windows.)
git-svn-id: https://svn.eduke32.com/eduke32@2538 1a8010ca-5511-0410-912e-c29ae57300e0
This was broken ever since updatesprite() had been forked off drawsprite() and
would cause static lights to never hit static sprites until one or the other
changed, after which the light would always get culled against outdated sprite
geometry.
git-svn-id: https://svn.eduke32.com/eduke32@2536 1a8010ca-5511-0410-912e-c29ae57300e0
Since updatesprite() only happens once for static sprites, avoiding
light culling if we hit it in a shadow pass means that sprite will
never be lit as long as that happens.
git-svn-id: https://svn.eduke32.com/eduke32@2535 1a8010ca-5511-0410-912e-c29ae57300e0
There are instances where oob picnums may propagate to that function, so
protect it. The digitanumber[z] bound check is actually made more permissive,
but could also just as well be removed now.
git-svn-id: https://svn.eduke32.com/eduke32@2533 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the differences in these codes stand out much more clearly.
git-svn-id: https://svn.eduke32.com/eduke32@2526 1a8010ca-5511-0410-912e-c29ae57300e0
- Fix typo, correctly adding SDL libs to the tools on OS X so that makesdlkeytrans builds.
- Move all mention of $(LIBS) out of build/Makefile into build/Makefile.shared because no linking takes place in the engine itself so LIBS additions were lost. This should fix USE_LIBPNG=1 on Windows at least.
- Other assorted cleanup.
git-svn-id: https://svn.eduke32.com/eduke32@2523 1a8010ca-5511-0410-912e-c29ae57300e0
- Fix up and add building instructions for kmd2tool, getdxdidf, and makesdlkeytrans.
- Add kmd2tool to "utils" build job.
- Fix warning in and cross-platform building of generateicon.
- Source and text cleanup!
git-svn-id: https://svn.eduke32.com/eduke32@2521 1a8010ca-5511-0410-912e-c29ae57300e0
- Properly handle the architecture definition when BUILD32_ON_64=1
- Add proper $(*LDFLAGS) to which LTO and ARCH are correctly passed.
- Cleanup of compiler flag variables.
This should fix to some degree building of the Build tools on OS X, and it may possibly fix the crashing of the OS X x86 32-bit build.
git-svn-id: https://svn.eduke32.com/eduke32@2520 1a8010ca-5511-0410-912e-c29ae57300e0
An effect is only really seen in the buildtools written in C++, currently just arttool.
This is mainly of interest to distributors of the buildtools to avoid missing DLL errors.
git-svn-id: https://svn.eduke32.com/eduke32@2507 1a8010ca-5511-0410-912e-c29ae57300e0
We shouldn't assume a particular bytes-per-line value and use ylookup[] instead.
Specifically, windowed modes on Windows use a frame buffer that always has odd
x dimension.
git-svn-id: https://svn.eduke32.com/eduke32@2505 1a8010ca-5511-0410-912e-c29ae57300e0
- in Mapster, pre-form the default 10 clip map names before returning from
G_CheckCommandLine() so it gets loaded even if we passed no cmdline args.
- malloc + strlen + strcpy --> strdup
- don't need to spank dead variables ;)
- we may call calloc with zero size, which isn't bad by itself, but asserting
for non-null afterwards is. Allocs of 0 are implementation-defined, and may
well return a null pointer (C99 7.20.3).
git-svn-id: https://svn.eduke32.com/eduke32@2502 1a8010ca-5511-0410-912e-c29ae57300e0
Gives a couple more fps for scenes where much screen estate is covered by
stuff, like when holding the devastator.
git-svn-id: https://svn.eduke32.com/eduke32@2499 1a8010ca-5511-0410-912e-c29ae57300e0
With the same setup as before, a screen-filling translucent wall (with nothing
drawn behind it) renders at about 7 fps faster (from 60-something fps initially)
git-svn-id: https://svn.eduke32.com/eduke32@2498 1a8010ca-5511-0410-912e-c29ae57300e0
These two functions draw a vertical line 4 neighboring pixels at a time.
This gives a significant speed boost for a full screen solid and masked wall
scene for x86_64 (where we have plenty of registers), about 60 --> 76 fps.
git-svn-id: https://svn.eduke32.com/eduke32@2497 1a8010ca-5511-0410-912e-c29ae57300e0
Also, a very minor change in the con/def module code. (int --> int32_t)
git-svn-id: https://svn.eduke32.com/eduke32@2495 1a8010ca-5511-0410-912e-c29ae57300e0
- Make all arguments explicit toggles (except for onlyzip).
- Disable PowerPC builds by default on Snow Leopard in addition to Lion.
- Enable Darwin 9 compatibility for all builds whenever PowerPC is enabled.
git-svn-id: https://svn.eduke32.com/eduke32@2487 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, if the sprite turned really out to be in void space, either freelist
inconsistency (before the list rewrite) or oob access (now) would happen.
Also add an bound-checking assert() for insertsprite's sectnum argument (it's not
a bound check!)
git-svn-id: https://svn.eduke32.com/eduke32@2480 1a8010ca-5511-0410-912e-c29ae57300e0
New engine variable 'int32_t Numsprites', not yet saved into savegames
or mapstates. (The capitalization is to distinguish it from the often-used
'numsprites' locals or structure member names.
In the editor, get rid of updatenumsprites().
git-svn-id: https://svn.eduke32.com/eduke32@2478 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, the lists starting at headspritestat[MAXSTATUS] and
headspritesect[MAXSECTORS] were both used as sprite freelists and were always
in complete synchrony. Now, make only the statnum list keep the free sprites.
This way, it has no CON compatibility implications because
headspritesect[MAXSECTORS] is inaccessible there. Leave the array at its
original size for now.
git-svn-id: https://svn.eduke32.com/eduke32@2477 1a8010ca-5511-0410-912e-c29ae57300e0
Makefiles: new features to facilitate above:
- buildtools: "make printutils" is a phony which simply lists all the tools
- $(EXESUFFIX_OVERRIDE)
git-svn-id: https://svn.eduke32.com/eduke32@2476 1a8010ca-5511-0410-912e-c29ae57300e0
The major outside-visible change is that this fixes the sound cutoff bugs that
happened because newly-spawned sprites took the place of those whose sounds
had not yet finished playing.
Besides, there are these changes:
- remove deletesprite{sect,stat}
- we have a new engine variable 'tailspritefree' that keeps track of the
sprite freelist tail
- we need to store it in savegames and mapstates, so bump the savegame
minor version
git-svn-id: https://svn.eduke32.com/eduke32@2470 1a8010ca-5511-0410-912e-c29ae57300e0
This is simply done by using the two list helper functions defined earlier
instead of a deletespriteX/insertspriteX pair.
git-svn-id: https://svn.eduke32.com/eduke32@2469 1a8010ca-5511-0410-912e-c29ae57300e0
Factor out two helper functions, do_deletesprite{sect,stat}
and do_insertsprite_at_headof{sect,stat}.
git-svn-id: https://svn.eduke32.com/eduke32@2466 1a8010ca-5511-0410-912e-c29ae57300e0
These operations aren't executed THAT often to warrant exposing four internal
functions. Besides, I'll be hacking on them and need everything laid out
cleanly. Should somebody complain, they can go change them to __fastcall or
something.
git-svn-id: https://svn.eduke32.com/eduke32@2465 1a8010ca-5511-0410-912e-c29ae57300e0
In changesprite{stat,sect}, don't check for deletesprite{stat,sect} failure,
because the only way it can fail was already checked for above. So, this is
essentially dead code elimination.
git-svn-id: https://svn.eduke32.com/eduke32@2462 1a8010ca-5511-0410-912e-c29ae57300e0
- JFBuild ports: arttool, givedepth, and mkpalette
- All viable tools are now built when 'make utils' is invoked, not just some
- Revert "initprintf" hack of previous commit and replace it with "compat_tools.c"
- Move Bstrtolower from baselayer.c to compat.c
- Makefiles: Add start and finish messages for the tools
- Makefiles: To prevent "-Wimplicit" from being passed to the C++ compiler, create $(*CONLYFLAGS)
git-svn-id: https://svn.eduke32.com/eduke32@2458 1a8010ca-5511-0410-912e-c29ae57300e0
- Adding $(EXESUFFIX) where it belongs in the Makefile.
- Eliminating a call to initprintf() from compat.c. This may not be ideal.
git-svn-id: https://svn.eduke32.com/eduke32@2457 1a8010ca-5511-0410-912e-c29ae57300e0
- forgot a glogy --> logy in a-c.c
- comment out stretchhline and slopevlin2 in a.nasm, the former also in a-c.c
- make transmaskvline2 use a uintptr_t where appropriate
git-svn-id: https://svn.eduke32.com/eduke32@2448 1a8010ca-5511-0410-912e-c29ae57300e0
With VBOs enabled, the virtual pointer to the geometry of frame 0 of a model
is always NULL. This was confusing the polymer code responsible for deciding
whether to enable smooth animations or not, which meant that any animation
that would loop to frame 0 would do it as if animation interpolation was
disabled, which looks very choppy.
git-svn-id: https://svn.eduke32.com/eduke32@2443 1a8010ca-5511-0410-912e-c29ae57300e0
- make some variables static
- conditionally compile out some code with DEBUG_ALLOCACHE_AS_MALLOC
- exit(1) on failure (instead of exit(0))
- some formatting
git-svn-id: https://svn.eduke32.com/eduke32@2438 1a8010ca-5511-0410-912e-c29ae57300e0
Note: I'm not really sure whether I'm initializing it in the right places.
git-svn-id: https://svn.eduke32.com/eduke32@2429 1a8010ca-5511-0410-912e-c29ae57300e0
When drawing from inside the mirror, there may be no 'bunches' (BUILD lingo,
not TROR ones) collected, but following code used the first one unconditionally.
git-svn-id: https://svn.eduke32.com/eduke32@2427 1a8010ca-5511-0410-912e-c29ae57300e0
Hlines for masked and translucent masked ceiling/floor (sprites).
- apply the --> 'do { ... } while (--cnt)' transformation, making these
functions iterate cnt+1 times like the asm version. This also fixes an
off-by-one issue where sprites or masked ceilings/floors had a one-pixel
non-drawn line to the right.
- This time, only declare-as-local two 'extern' globals (asm1 and asm2).
It seems that I was too eager with "localing" all file-scoped vars earlier.
GCC is able to remove the loads from memory inside the loop by itself, whereas
clang is not. This is not trivial, since it has to prove that the 'screen'
pointer passed to the functions will never alias these globals.
git-svn-id: https://svn.eduke32.com/eduke32@2424 1a8010ca-5511-0410-912e-c29ae57300e0
The apparent horizon (in units proportional to pixels by a constant factor)
was being calculated without normalizing to viewingrange, resulting a
discrepancy between the drawn and actual up/down angle with non-default
viewingranges (e.g. with r_usenewaspect=1, or when setting it from setaspect).
This also means that the center-of-aim will now be the same regardless of
the aspect.
This fixes many derived bugs:
* inconsistency w/ crosshair when shooting a gun and aiming up/down (obviously)
* bugs resulting from being able to look up/down too far (garbage non-slope
texture-mapping and viewing BIGORBIT skies above the borders in classic).
Note: mods that had workaround logic for this bug will have to remove it...
git-svn-id: https://svn.eduke32.com/eduke32@2414 1a8010ca-5511-0410-912e-c29ae57300e0
This has no measureable difference. Oh well, maybe it benefits weaker
machines, since the generated loop code should definitely be prettier.
git-svn-id: https://svn.eduke32.com/eduke32@2408 1a8010ca-5511-0410-912e-c29ae57300e0
This doesn't give much, maybe 0.5 fps more, probably because the
loop body is pretty long.
git-svn-id: https://svn.eduke32.com/eduke32@2406 1a8010ca-5511-0410-912e-c29ae57300e0
Affected functions: hlineasm4, vlineasm1, mvlineasm1, tvlineasm1.
Optimizations:
- declare all used variables as possibly const-qualified locals in each
function. This removes unnecessary loads from memory in the loops.
- rewrite "for (; cnt>=0; cnt--) {...}" to "cnt++; do {...} while (--cnt);"
in the three last ones (yes, these function iterate cnt+1 times). This
makes them functionally equivalent to the asm versions (madness ensues for
cnt < 0) and allows the compiler to remove one 'test' instruction at the
end of each loop.
- in the translucence function, replace addition by ORing
Observations (system: Core2 Duo Linux x86_64):
With a 1680x1050 window fully covered by the respective type of wall (simple,
masked, trans. masked), fps increases by 3-4 from the baseline of approx. 60.
git-svn-id: https://svn.eduke32.com/eduke32@2405 1a8010ca-5511-0410-912e-c29ae57300e0
- remove the objects too on 'clean'
- fix warning with 'transpal' on x64
(generates translucency and shade tables)
git-svn-id: https://svn.eduke32.com/eduke32@2404 1a8010ca-5511-0410-912e-c29ae57300e0
- print compilation status for building the final executable
- add 'cleanutils' target in build/Makefile
- don't link against pthread, seems unnecessary
- don't build nedmalloc.o when not requested in Makefile.common
git-svn-id: https://svn.eduke32.com/eduke32@2403 1a8010ca-5511-0410-912e-c29ae57300e0
It needs to have the sound quality box removed and the Game directory box added, possibly among other things.
git-svn-id: https://svn.eduke32.com/eduke32@2396 1a8010ca-5511-0410-912e-c29ae57300e0
(Classic renderer). We don't need 64-bit integers; also use the nice
asm version of divscale32() if possible.
git-svn-id: https://svn.eduke32.com/eduke32@2390 1a8010ca-5511-0410-912e-c29ae57300e0
This was discovered because viewscreens (TILE_VIEWSCR) ceased being drawn
with the MAXTILES increase (reported by Hank, who also did the bisect).
git-svn-id: https://svn.eduke32.com/eduke32@2376 1a8010ca-5511-0410-912e-c29ae57300e0
That is, everyplace a user input is to be converted. The only remaining
instance of atoi() is now atoi(s_buildDate).
git-svn-id: https://svn.eduke32.com/eduke32@2374 1a8010ca-5511-0410-912e-c29ae57300e0
Internally, the last argument to neartag is now a pointer to a function
int32_t (*blacklist_sprite_func)(int32_t i),
which is supposed to return 1 if sprite[i] should NOT be considered for hitting.
This is now used in the hard-coded neartag() calls in sector.c, but not in any
way in CON (there's neither a C blacklist function provided, nor is there a
possibility to define one in CON). There, all sprites with picnums >=1 and <=10
(i.e. the effectors) will be blacklisted. This remedies problems where such
sprites would get in the way of switches.
Note that a whitelist approach (only consider a predefined set, namely those
picnums which will be checked afterwards) has back-compatibility implications
since people may have used e.g. lotagged window sprites to cover a switch.
Also, the >=1 to <=10 range is [sic] (the static, not dynamic values are used),
since anyone redefining effector picnums is clearly out of their mind.
git-svn-id: https://svn.eduke32.com/eduke32@2373 1a8010ca-5511-0410-912e-c29ae57300e0
lzwcompress can access one byte after lzwrawbuf[LZWSIZE] when provided with
an uncompleng of LZWSIZE, so we increase that array's size by one.
git-svn-id: https://svn.eduke32.com/eduke32@2369 1a8010ca-5511-0410-912e-c29ae57300e0
Remove dfread and kdfwrite, only leave a recipe how to get their
source from the respective used functions.
git-svn-id: https://svn.eduke32.com/eduke32@2368 1a8010ca-5511-0410-912e-c29ae57300e0
The following functions have const qualifiers attached for the 'destination'
arguments: kdfwrite, dfwrite in cache1d.c and copybuf{byte,reverse,} in the
pragmas source or headers. A couple uses of the latter ones were replaced
with calls to standard library functions.
git-svn-id: https://svn.eduke32.com/eduke32@2361 1a8010ca-5511-0410-912e-c29ae57300e0
This is useful to debug out-of-bound violations for memory allocated
with that function.
git-svn-id: https://svn.eduke32.com/eduke32@2360 1a8010ca-5511-0410-912e-c29ae57300e0
This makes more sense because the game selector draws the names with uppercase
letters and the hotkeys to jump to a map starting with a particualar letter
aren't case sensitive, either. Mapster32's selector will still display maps
starting with upper case first.
git-svn-id: https://svn.eduke32.com/eduke32@2356 1a8010ca-5511-0410-912e-c29ae57300e0
The bulk are whitespace changes; the only exception is a
"if (expr) { stmt; }" --> "if (expr) stmt;"
git-svn-id: https://svn.eduke32.com/eduke32@2353 1a8010ca-5511-0410-912e-c29ae57300e0
The reason was that drawmasks(), which was where the resetting of the fake
RoR textures happened under Polymer, can be called from polymer_displayrooms()
when mirrors are present. I was assuming that drawmasks() was only ever called
after the 'main' drawrooms and that hence the sequence of fake RoR tile tweaking
was set, reset, set, reset, ... which it was not.
Now, do the resetting explicitly after every drawmasks() in the editor.
git-svn-id: https://svn.eduke32.com/eduke32@2350 1a8010ca-5511-0410-912e-c29ae57300e0
I find this cleaner for two reasons. First, lotags won't get in the way of
neartag(), so that doors and switches near constrained TROR walls can be
pushed. Second, this removes the information leak so that CON coders aren't
tempted to read that values directly before a proper API for that comes along.
When writing out a map in-game (e.g. with dndebug), restore the respective
members so that it can be loaded in the editor again.
git-svn-id: https://svn.eduke32.com/eduke32@2349 1a8010ca-5511-0410-912e-c29ae57300e0
getzrange() returns the floor rather than the sprite if their heights are
equal. Now, make an exception for extended floors (analogously, ceilings).
git-svn-id: https://svn.eduke32.com/eduke32@2347 1a8010ca-5511-0410-912e-c29ae57300e0
- guard cansee() against negative sectnums (return 0 immediately), since
it's often called with the player sectnum as one argument
- in resetpspritevars(), don't inset APLAYER sprite if sectnum < 0, which
can happen if a map is started in void space accidentally (e.g. from
the editor)
- two checks before accessing sector[] with a player sectnum
git-svn-id: https://svn.eduke32.com/eduke32@2342 1a8010ca-5511-0410-912e-c29ae57300e0
Internally, there's a new function fade_screen_black() that implements the
fading more efficiently than calling rotatesprite for classic, and uses
tile 0 (assumed to have at least 64x32 size) in the GL modes.
The black background of the user map selector is still done with rotatesprite
and tile BLANK in every renderer.
git-svn-id: https://svn.eduke32.com/eduke32@2312 1a8010ca-5511-0410-912e-c29ae57300e0
So that the game won't exit if you write 'vidmode 4' when intending
'setrendermode 4'.
git-svn-id: https://svn.eduke32.com/eduke32@2311 1a8010ca-5511-0410-912e-c29ae57300e0
The implementation uses the recently introduced updatesector_onlynextwall when
setspritez fails.
git-svn-id: https://svn.eduke32.com/eduke32@2302 1a8010ca-5511-0410-912e-c29ae57300e0
for an assertion failure with clang. Really ought to file a bug report instead.
git-svn-id: https://svn.eduke32.com/eduke32@2292 1a8010ca-5511-0410-912e-c29ae57300e0
It looks like GCC doesn't honor the 'used' attribute with LTO. This is
"fixed" by declaring the variables in question with external linkage
(i.e. removing the 'static'). I consider such behavior a GCC bug, though.
git-svn-id: https://svn.eduke32.com/eduke32@2286 1a8010ca-5511-0410-912e-c29ae57300e0
Internally, updateanimation() now takes a third parameter 'lpal'.
git-svn-id: https://svn.eduke32.com/eduke32@2277 1a8010ca-5511-0410-912e-c29ae57300e0
This may fix compilation for optimized builds with GCC or clang where
the compiler would otherwise decide that those symbols are unused.
git-svn-id: https://svn.eduke32.com/eduke32@2271 1a8010ca-5511-0410-912e-c29ae57300e0
If enabled, this makes the following arrays be allocated statically:
spriteext, spritesmooth, sector, wall, sprite, tsprite, while
necessarily disabling the clipshape feature (because it relies on
setting sector/wall to different malloc'd block temporarily).
To compile, pass DEBUGANYWAY=1 in addition to RELEASE=0 to 'make',
and it's really only useful with CC=clang, of course.
git-svn-id: https://svn.eduke32.com/eduke32@2270 1a8010ca-5511-0410-912e-c29ae57300e0
I'm decreasing EXTRATILES because I feel that it's way overcommitted. It's the
max number of model-tiles that have their own skin for a certain palette,
like the slimer egg in the HRP.
git-svn-id: https://svn.eduke32.com/eduke32@2267 1a8010ca-5511-0410-912e-c29ae57300e0
- fix one bound-checking line
- rewrite two lines in astub.c to potentially not overflow an int16
- make tiletovox[] an array of int16's
git-svn-id: https://svn.eduke32.com/eduke32@2266 1a8010ca-5511-0410-912e-c29ae57300e0
Always malloc that buffer. This allows us to remove suckcache() from
cache1d.c, which I believe to be buggy (see comments in the source).
git-svn-id: https://svn.eduke32.com/eduke32@2261 1a8010ca-5511-0410-912e-c29ae57300e0
- 'whitecol' was defined in the engine and in build.c, use only the engine one
- make cachesize, artsize, artversion static in engine.c
- undo some formatting havoc presumably done by astyle
git-svn-id: https://svn.eduke32.com/eduke32@2260 1a8010ca-5511-0410-912e-c29ae57300e0
It is likely that this is the value it used to have at some point, because
the MAXTILEFILES macro equals 256 and is as old as the Duke3D source.
loadpics() now refuses to load an ART file with localtilestart or localtileend
out of bounds, or if localtileend<=localtilestart (i.e. no tiles in ART file, or
nonsense). Also, on 'invalid art file version', continue instead of returning.
Note: this does not increase the maximum number of tiles, which is still 15360,
it only gives a bit more freedom to arrange them (well, into more art files).
Also, I don't see what anyone keeps off from packing any number of tiles (from
1 to 15360) into an art file. Old EDITART limits?
git-svn-id: https://svn.eduke32.com/eduke32@2259 1a8010ca-5511-0410-912e-c29ae57300e0
The cause was a combination of many factors. First, Polymer requires the
start-drawing position to be inside the sector to draw (deviations lead to
incorrect drawing). This was violated by the game, because it interpolated
the current and next tic position without updating the sectnum, leading to
inconsistencies especially when passing through narrow sectors. Polymer
worked around it by doing an updatesector() each frame, however this works
poorly for maps with overlapping geometry such as SoS or RoR.
The solution to this is to add a new engine function,
updatesector_onlynextwalls(), which searches the sectors (via nextsector)
in breadth-first fashion instead of from 0 to numsectors-1, like updatesector
does when it fails for the *immediate* nextwall neighbors.
Internally, the breadt-first search helpers are moved into the engine.
git-svn-id: https://svn.eduke32.com/eduke32@2256 1a8010ca-5511-0410-912e-c29ae57300e0
so try and steal it back"), prevent calling IDirectDrawSurface_SetPalette()
with NULL arguments, causing a crash. It's happened for me on Vista, when
initially changing from 8-bit to 32-bit mode.
git-svn-id: https://svn.eduke32.com/eduke32@2255 1a8010ca-5511-0410-912e-c29ae57300e0
I didn't have much success in finding bugs using it, but it works
out-of-the-box on my setup, so it may be useful in the future.
git-svn-id: https://svn.eduke32.com/eduke32@2254 1a8010ca-5511-0410-912e-c29ae57300e0
The second one is passed to the 'mouseb' variable, but the game currently
can't map it since ud.config.MouseFunctions[] would have to be enlarged,
breaking savegame compatibility.
Works both for the Windows and SDL layers. For the latter, instead of using
the SDL_BUTTON_X1/X2 macro constants, I'm using 8 and 9, since that is what
SDL (and incidentally or not, xev) gives me for those buttons.
git-svn-id: https://svn.eduke32.com/eduke32@2252 1a8010ca-5511-0410-912e-c29ae57300e0
It turns out that with model interpolation, out-of-bounds frame numbers may
be generated with thinned out models, so disable it until I can sort out
what's wrong with it.
Also, minor code cleanup.
git-svn-id: https://svn.eduke32.com/eduke32@2251 1a8010ca-5511-0410-912e-c29ae57300e0
Also, for debugging builds, show this message from verbosity level 1 on.
git-svn-id: https://svn.eduke32.com/eduke32@2250 1a8010ca-5511-0410-912e-c29ae57300e0
the only visible change is that polymost_trytexcache (formerly two
instances of nearly duplicate code) now prints a diagnostic after
a cache miss. The one that one is most likely to encounter is
"r_downsize doesn't match", meaning that this setting likely differs
between Mapster and the game.
git-svn-id: https://svn.eduke32.com/eduke32@2248 1a8010ca-5511-0410-912e-c29ae57300e0
The syntax is as follows:
animsounds <anim> { frame1 sound1 frame2 sound2 ... }
<anim> has to be one of the tokens: cineov2, cineov3, RADLOGO, DUKETEAM,
logo, vol41a, vol42a, vol4e1, vol43a, vol4e2, or vol4e3, corresponding
to hard-coded Duke3D anims.
The frameN's (1-based frame numbers) have to be in ascending order (but not
necessarily strictly ascending, so that a frame may have more than one sound).
Example: for Duke3D's XBLA nuke logo animation (IVF extracted from nuke.webm),
the following definition overlays the video with a sound sequence similar
(identical save for timing) to the original nuke animation:
// frame 1: FLY_BY, frame 64: PIPEBOMB_EXPLODE
animsounds logo { 1 244 64 14 }
git-svn-id: https://svn.eduke32.com/eduke32@2242 1a8010ca-5511-0410-912e-c29ae57300e0
let it hang around causing trouble later on; delete it right now and inform
the user.
Add a couple of 'static's to some functions and file scope data in mdsprite.c
git-svn-id: https://svn.eduke32.com/eduke32@2237 1a8010ca-5511-0410-912e-c29ae57300e0
the SE ones douple, triple, ... after each save. Maphack lights are reloaded
with polymer_resetlights() (though I've had them disappearing after load, I
couldn't reproduce it afterwards).
- in debugging builds, print a message when polymer_resetlight is called on a
nonexistent one. The problem is not so much the call itself (it's guarded),
but the fact that resources on the caller side may not have been freed if it
thinks that those lights do in fact exist. Right now, it's not the case though.
- add 'loaded map hack' messages after some other successful loadmaphack calls
git-svn-id: https://svn.eduke32.com/eduke32@2236 1a8010ca-5511-0410-912e-c29ae57300e0
'frequently' isn't such a good idea. Assume an actor constantly changes the
palette to some value and you're attacked by a newbeast at the same time. Then
the pain tinting would be reset each time the actor's code is run. This commit
adds a new flag 16 to setbrightness(), meaning "don't reset the fade tinting".
Its only use right now is from CON's setgamepalette command (and there, always).
The change is done in the engine and thus affects all platforms.
git-svn-id: https://svn.eduke32.com/eduke32@2225 1a8010ca-5511-0410-912e-c29ae57300e0
This is in the similar vein as the set-palette deferring and it's this
that fixes the low FPS in the radioactively contaminated area in AMC TC:
Megabase (since setgamma() is called from setbrightness()).
Again, update issues might be expected, but changing focus between EDuke32
and the desktop and back seems to restore the gamma settings properly on
Kubuntu. Looks like X (or whatever above handles this stuff) maintains it
on a per-application basis.
git-svn-id: https://svn.eduke32.com/eduke32@2222 1a8010ca-5511-0410-912e-c29ae57300e0
CON code sometimes uses 'setgamepalette' from withing actors, which is a bit too
frequent. Deferring the actual palette updating means that multiple requests in
between two screen redraws are coalesced into one, which is desirable for
performance reasons and for the reduction of 'tearing' artefacts (but not
prevention, since the drawing isn't synced to the screen refresh rate with
vsync off).
(Did-not-)update issues might be introduced.
Windows isn't touched because
- I expect it to be more brittle, especially in light of the ATI HW gamma
problems.
- I haven't tested whether the particular performance penalty that lead to this
change ('gas' in AMC TC) exists there too
git-svn-id: https://svn.eduke32.com/eduke32@2221 1a8010ca-5511-0410-912e-c29ae57300e0
color-inversed shots. For both PNG and TGA, change the way they're
done in 8-bit mode: instead of XORing every byte with 15, save the
inverse palette (each component taken 255-x).
git-svn-id: https://svn.eduke32.com/eduke32@2219 1a8010ca-5511-0410-912e-c29ae57300e0
instead of shorts. This fixes their values' overflow in AMC TC megabase and
probably a couple of other large maps.
git-svn-id: https://svn.eduke32.com/eduke32@2216 1a8010ca-5511-0410-912e-c29ae57300e0
This makes savegames practically the same as the initial snapshot of a demo.
Saves are now named 'dukesavX.esv' (demos: 'edemoX.edm').
Additionally, many changes that couldn't/needn't be cleanly separated are added
with this commit:
- make spriteext_t have the same size across 32/64 bit platforms (actor_t partially)
- prevent saving/loading in MP games (it certainly didn't work and still doesn't)
- it's time we start using assertions! Define NDEBUG for releasse builds.
- reset savegame major and minor versions (we have a new magic string, so no conflict)
git-svn-id: https://svn.eduke32.com/eduke32@2207 1a8010ca-5511-0410-912e-c29ae57300e0
32- and 64-bit platforms. Also, make struct type actor_t also have a common
size of 128 bytes. New code currently disabled and #ifdef'd for comparison.
This requires certain t_data[] entries ([1]: move ptr, [4]: action ptr and
[5]: ai ptr with actors) to be converted to script offsets instead of pointers,
breaking savegame and net packet compatibility (we could in theory try hard not
to, but it would be too much trouble).
git-svn-id: https://svn.eduke32.com/eduke32@2185 1a8010ca-5511-0410-912e-c29ae57300e0
Actors are always moved such that _they_ clip against blocking sprites, even
if their blocking bit is clear. Setting the new bit make them not clip against
anything. The promary use of this is for decorative moving sprites that are
spawned in masses, such as rain or snow.
git-svn-id: https://svn.eduke32.com/eduke32@2184 1a8010ca-5511-0410-912e-c29ae57300e0
already have MAXSPRITESONSCREEN of them, return 1 to signal that the caller
should break out of the loop.
git-svn-id: https://svn.eduke32.com/eduke32@2183 1a8010ca-5511-0410-912e-c29ae57300e0
Usage: press the ['] (quote) modifier together with the PERIOD key.
Aligns only the immediate upper and lower neighbors of each wall that got
aligned by following point2s or nextwalls. Doesn't play well with Alt
(carry over xrepeat) yet, might need two subsequent alignment passes.
git-svn-id: https://svn.eduke32.com/eduke32@2178 1a8010ca-5511-0410-912e-c29ae57300e0
(getzrange, hitscan, clipmove, drawmapview).
They're reproducible with DNE1.3D; Since these angle values most likely come
from CON code, my suggestion would be to bit-and all values representing angles
with 2047 when setting the from CON, but I'd have to think about potential
side-effects of doing this.
git-svn-id: https://svn.eduke32.com/eduke32@2170 1a8010ca-5511-0410-912e-c29ae57300e0
callback 'G_Polymer_UnInit'.
- In astub.c, reset spritelightid to -1 when nulling the spritelightptr of
a sprite (no crashes observed, just precaution)
- In sdlayer.c, catch SIGILLs with our signal handler too, since illegal
instructions are what the instrumented debug builds will execute when
attempting to carry out an undefined (per C) operation.
git-svn-id: https://svn.eduke32.com/eduke32@2169 1a8010ca-5511-0410-912e-c29ae57300e0
How in the name of hell this could pass undetected for so long is a
mystery to me.
git-svn-id: https://svn.eduke32.com/eduke32@2163 1a8010ca-5511-0410-912e-c29ae57300e0
values; check the color index that is potentially gotten from the string to
be printed.
git-svn-id: https://svn.eduke32.com/eduke32@2162 1a8010ca-5511-0410-912e-c29ae57300e0
them has a different height, print the sectnums of two differing sectors
to so that the mapper can find and examine them with Ctrl-J.
git-svn-id: https://svn.eduke32.com/eduke32@2146 1a8010ca-5511-0410-912e-c29ae57300e0
The texture warping mode will need to be set depending on whether we're
actually drawing a parallaxed sky or not.
git-svn-id: https://svn.eduke32.com/eduke32@2142 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes the vertical (~1 texel wide) stripes that are especially
noticable with tiled art skies and Polymost with r_parallaxskyclamp=1
or Polymer (which always uploads skies with repeating s and t coords).
What constitutes a sky tile is currently hardcoded to be >=78 and <=99.
git-svn-id: https://svn.eduke32.com/eduke32@2141 1a8010ca-5511-0410-912e-c29ae57300e0
and restore_highlighted_sector functions. What this means is that TROR bunches
are now correctly duplicated too (only if all sectors of a given bunch are
highlighted).
git-svn-id: https://svn.eduke32.com/eduke32@2138 1a8010ca-5511-0410-912e-c29ae57300e0
(i.e. first press RAlt, then hold RShift to make it active), consider all
sectors, even the grayed out ones.
This makes 6 modifier keys in 4 categories for RAlt. Can you name them all?
Also spell out the labels that get drawn near the reticle when applying
some of the modifiers and make them not show when not actually selecting
(e.g. pressed RShift alone, but have highlighted sectors)
git-svn-id: https://svn.eduke32.com/eduke32@2137 1a8010ca-5511-0410-912e-c29ae57300e0
that bunches and nextwall links are restores, too. Now, to coalesce two
TROR maps (e.g. for a CBP), one could
do for i allsectors, sethighlightsector i 1
on the console, and then load the 'other' map to copy over the contents
of the first, including all TROR stuff. Note that neither selecting
all sectors with RAlt, nor duplicating them with Insert would lead to
the desired effect (yet).
Internally,
- yax_setbunch() now has different behavior for bunchnums -1, -2 and -3
(it either clears the nextwalls or not)
- build.c has a helper function free_n_ptrs(). This could be handy in
other situations where many blocks of memory must be allocated
consecutively and freed in case of failure
git-svn-id: https://svn.eduke32.com/eduke32@2136 1a8010ca-5511-0410-912e-c29ae57300e0
suboptimal, but at least 'correct' and won't produce the aforementioned
corruptions anymore.
git-svn-id: https://svn.eduke32.com/eduke32@2135 1a8010ca-5511-0410-912e-c29ae57300e0
next{wall,sector} indices instead of using checksectorpointer() so
that the nextwalls will be restored exactly as they were (provided
that they are copied). Also fix tweaking the sectnums of sprites.
git-svn-id: https://svn.eduke32.com/eduke32@2132 1a8010ca-5511-0410-912e-c29ae57300e0
Called 'loop punching'. In addition to duplicating the loop, the inner
portions of the original and cloned loop are made into a new bunch, and
the loop walls are made to be neighbors, linking their movement to each
other. This gives a way to create island sectors with a differing
bunchnum in the midst of an already extended area.
Usage:
For an extended sector containing a CCW inner loop, select its points
using Ctrl+Shift. Press Ctrl-E to be queried whether to duplicate the
points into the upper or lower extension (even if it's unambiguous).
A number of conditions must be met for a successful 'punch', which
should hopefully be more or less obvious. Among them:
- loop walls should all be red
- the starting wall is only considered among the non-grayed-out ones
- the neighboring sector must not contain points inside or at the loop
git-svn-id: https://svn.eduke32.com/eduke32@2130 1a8010ca-5511-0410-912e-c29ae57300e0
would break out of the 2D mode loop when splitting a sector would exceed
limits.
git-svn-id: https://svn.eduke32.com/eduke32@2129 1a8010ca-5511-0410-912e-c29ae57300e0
- Don't crash when sector joining fails under certain circumstances.
- Increase the point lock (Manhattan) distance from 1/16th to 1/8th
of the grid square length, making it easier to snap to vertices not
lying at the grid points with grid lock on
- When drawing walls, don't snap to any of them except the first drawn
git-svn-id: https://svn.eduke32.com/eduke32@2126 1a8010ca-5511-0410-912e-c29ae57300e0
When having drawn N new points (and having one 'free') and pressing
ENTER, the N line segments between the new points are checked one by
one for intersection with every non-grayed-out wall and a wall vertex
is inserted at every intersecting point. This may be viewed as a
prerequisite for a 'cutter' style tool.
git-svn-id: https://svn.eduke32.com/eduke32@2125 1a8010ca-5511-0410-912e-c29ae57300e0
This function only handles the actual insertion, also taking care of
constrained TROR walls. Anything around the inserting such as backing up
drawn walls or snapping the x/y position to the grid is handled outside.
git-svn-id: https://svn.eduke32.com/eduke32@2123 1a8010ca-5511-0410-912e-c29ae57300e0
The main change consist of adding a key press (and release) callback
whose only purpose is to be used from m32script as EVENT_KEYPRESS.
When entering that event, the RETURN variable will be set to the
keystatus code of the key, and whether it was pressed or released can
be checked by looking at keystatus[] at that code (ifholdkey and
ifhitkey do this). The purpose of this, then, is to be able to remap
keys in a more general (and complicated) fashion than is possible with
the mapster32.cfg 'remap' option. Various other additions build around
this central one:
- add an example EVENT_KEYPRESS to a.m32, among other things emulating
the keypad arrows with Alt-<normal arrows> for notebook convenience;
disabled initially
- a.m32: set 'owner' with Alt-KP2: now Alt-Shift-KP2, because of
collision with the above
- new m32script command: setkey <keycode>, setting keystatus[<keycode>]
to 1 (note: may be restricted to use in EVENT_KEYPRESS only in the
future)
- fix indexing an m32script array with a defined label, there used to
be a 'not a gamevar' error instead
- add the following constant labels for some key codes:
KEY_SCROLL, KEY_F1 .. KEY_F12
git-svn-id: https://svn.eduke32.com/eduke32@2122 1a8010ca-5511-0410-912e-c29ae57300e0
with no highlighted sectors; and when entering 3D mode, even if there are
highlighted sectors. This should have almost no effect, but I find it cleaner
that way.
- Check map for corruption every time an editing change is done. This was
accidentally disabled when commenting out the undo code (which I've yet
to debug).
git-svn-id: https://svn.eduke32.com/eduke32@2121 1a8010ca-5511-0410-912e-c29ae57300e0
of SPACE and C when in side-view mode. Now, this is accomplished by checking
directly in the overheadeditor code.
git-svn-id: https://svn.eduke32.com/eduke32@2119 1a8010ca-5511-0410-912e-c29ae57300e0
- new mapster32.cfg and OSD variable 'fixmaponsave_sprites', telling the
editor whether to 'fix' the sprite sectnums on saving and entering 3D
mode. Note that a) sprite sectnums are never fixed when 'script_expertmode'
is enabled, as before, and b) sprites that have out-of-bounds sectnums
are still fixed if a proper sector is found
- if saving and some sprite sectnums have thus been tweaked, inform the
mapper on the status line and print the changes in the OSD
- fix update issue similar to an earlier one: when 'saving as', the astub.c-
based file name is now updated too, so saving with Ctrl-S now saves into
the one save with 'save as' (and not the old one)
- don't attempt to recheck wall pointers from scratch (when saving and running
with -check) if it's a TROR map
git-svn-id: https://svn.eduke32.com/eduke32@2110 1a8010ca-5511-0410-912e-c29ae57300e0
Hopefully this fixes the periodic pausing/unpausing that a few people
have been experiencing.
Also fix build with GCC 3.
git-svn-id: https://svn.eduke32.com/eduke32@2108 1a8010ca-5511-0410-912e-c29ae57300e0
with RAND_MAX > 32767 (everything except Windows?). The 'displayrand' command
now returns values from 0 to 32767 inclusive, across all platforms.
git-svn-id: https://svn.eduke32.com/eduke32@2105 1a8010ca-5511-0410-912e-c29ae57300e0
last one + this one:
A couple of tweaks against accidental overwriting of maps.
- first, fix a bug where the map name wasn't reset to 'newboard.map' when starting a
new map
- When saving with Ctrl-S, query the user for confirmation and also show the file name
where the map will be written
- when going into the ESC-menu, print the file name where the map will be written
on pressing 'S' above the '(S)ave' text
git-svn-id: https://svn.eduke32.com/eduke32@2096 1a8010ca-5511-0410-912e-c29ae57300e0
cursor, query the mapper to pick one. The joining can still fail afterwards,
which makes it only a semi-automatic helper feature.
git-svn-id: https://svn.eduke32.com/eduke32@2092 1a8010ca-5511-0410-912e-c29ae57300e0
allowed circle-walls started on the unconstrained _other_ side of a constrained
wall. Also fix a potential invalid wall access when inserting a point (pretty
serious, that!)
git-svn-id: https://svn.eduke32.com/eduke32@2091 1a8010ca-5511-0410-912e-c29ae57300e0
also for make-circle (C, SPACE). There's still a TROR corruption happening
probably when inserting on constrained walls, but I've yet to get behind the
real cause.
git-svn-id: https://svn.eduke32.com/eduke32@2090 1a8010ca-5511-0410-912e-c29ae57300e0
some wall drawing state is ripped out from overheadeditor() into a
a file-scope struct (even if we don't yet need it there). If the deleting
touches the first drawn point, the walls drawn so far are cleared.
git-svn-id: https://svn.eduke32.com/eduke32@2089 1a8010ca-5511-0410-912e-c29ae57300e0
overheadeditor() by allocating temp variables in the blocks where they
are needed.
git-svn-id: https://svn.eduke32.com/eduke32@2088 1a8010ca-5511-0410-912e-c29ae57300e0
- fix arg checking in checkdefs.sh
- some tilenum and quote ID validation in the CON interpreter
- G_DrawDigiNum and friends: eliminate redundant strlen calls
git-svn-id: https://svn.eduke32.com/eduke32@2086 1a8010ca-5511-0410-912e-c29ae57300e0
ATI cards.
From the time of OpenGL initialization, gamma lookup in classic/fullscreen
will be done in software. Before that, always do a setgamma() after setting the
palette, since this is what resets the HW gamma. However, this may lead to
unappealing artifacts with portions of the scene being sent to the screen with
different gammas.
git-svn-id: https://svn.eduke32.com/eduke32@2085 1a8010ca-5511-0410-912e-c29ae57300e0
maybe replace them with the proper names.
Usage:
checkdefs.sh <some.def> [[<some_dir>] -patch]
<some_dir> is taken to be the base directory of the search path.
-patch uses 'sed -i' to replace the offending findings
git-svn-id: https://svn.eduke32.com/eduke32@2081 1a8010ca-5511-0410-912e-c29ae57300e0
We pack our own copy of glext.h to avoid build breakages on older environments,
and having gl.h include its own was defeating all that.
git-svn-id: https://svn.eduke32.com/eduke32@2080 1a8010ca-5511-0410-912e-c29ae57300e0
fashion. Among other things, this makes the FOV widening when shrunk
work. User CON code should always check the initial viewingrange value
when attempting to do FOV effects like zoom, because it is not guaranteed
to be 65536 due to different screen aspect ratios etc.
git-svn-id: https://svn.eduke32.com/eduke32@2078 1a8010ca-5511-0410-912e-c29ae57300e0
polymer_addlight(). I have no idea whether it's the 'right' thing,
but it fixes this:
Conditional jump or move depends on uninitialised value(s)
at polymer_updatelights (polymer.c:5090)
by polymer_drawrooms (polymer.c:938)
. . .
Uninitialised value was created by a stack allocation
at loadmaphack (engine.c:9482)
Fix another uninitialized access when rendering jpegs.
git-svn-id: https://svn.eduke32.com/eduke32@2069 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes a crash when loading a map afterwards.
Tweak a few debugging messages and some whitespace.
git-svn-id: https://svn.eduke32.com/eduke32@2068 1a8010ca-5511-0410-912e-c29ae57300e0
Also move a 'int16_t editstatus' declaration from polymost.c to engine_priv.h.
git-svn-id: https://svn.eduke32.com/eduke32@2066 1a8010ca-5511-0410-912e-c29ae57300e0
Getting the texture handles without requiring invalidation means we can
handle ART-animating tilenums without impacting performance too much.
git-svn-id: https://svn.eduke32.com/eduke32@2058 1a8010ca-5511-0410-912e-c29ae57300e0
This won't actually do anything until the a debug bit is added when
creating the context, but that requires support for GLX_create_context
which SDL doesn't support. I'll add support for WGL_create_context to
winlayer in a bit as a stopgap.
Also updates our local copy of glext.h with a fresh one from the
Khronos registry.
git-svn-id: https://svn.eduke32.com/eduke32@2056 1a8010ca-5511-0410-912e-c29ae57300e0
We need to Y-invert the projection texcoords when sampling
from the lightmap.
git-svn-id: https://svn.eduke32.com/eduke32@2055 1a8010ca-5511-0410-912e-c29ae57300e0
Sprites would stick with their old material on global palette change.
This goes through all prsprites and clobbers their CRCs so that an
alternate skin / tint / highpal can be applied accordingly.
git-svn-id: https://svn.eduke32.com/eduke32@2053 1a8010ca-5511-0410-912e-c29ae57300e0
The winding order of faces is different if only flipping about X or Y,
and we were unconditionally culling CW faces.
git-svn-id: https://svn.eduke32.com/eduke32@2052 1a8010ca-5511-0410-912e-c29ae57300e0
the nextwall pointers correctly; Add some 'asksave=1' and 'make old-nextwalls
invalid'.
git-svn-id: https://svn.eduke32.com/eduke32@2048 1a8010ca-5511-0410-912e-c29ae57300e0
First, if we're in Polymer, don't precache tinted tiles that have a highpal
for that certain pal. Second, don't precache tiles for palnum 251 (the last
non-reserved one, which is used as a crosshair pal). Assuming that there are
no other tints, this cuts the initial precache time and cache size on disk in
half.
git-svn-id: https://svn.eduke32.com/eduke32@2045 1a8010ca-5511-0410-912e-c29ae57300e0
of the picnums of all sprites, omit the newly inserted sprite itself!
git-svn-id: https://svn.eduke32.com/eduke32@2043 1a8010ca-5511-0410-912e-c29ae57300e0
This way, crashlogs will really be appended. Additionally, print a time
at the end of each backtrace.
winlayer.c: load ebacktrace1.dll instead of the old one
Makefile.common: when building with DEBUGANYWAY=1, don't omit frame pointers
This will let us get a stack trace for crashes with the release build code.
git-svn-id: https://svn.eduke32.com/eduke32@2040 1a8010ca-5511-0410-912e-c29ae57300e0
Keep track of which side is getting culled, swap around mirrors, swap
around model drawing.
git-svn-id: https://svn.eduke32.com/eduke32@2032 1a8010ca-5511-0410-912e-c29ae57300e0
is picked" but still not perfect. In particular, sometimes a wrong wall is
selected, and sprites don't get picked through portals. As a rule of thumb,
don't be too far away from the objects you're modifying in 3D mode.
git-svn-id: https://svn.eduke32.com/eduke32@2030 1a8010ca-5511-0410-912e-c29ae57300e0
before, and additionally a mode that doesn't clip against masked walls
and sprites.
git-svn-id: https://svn.eduke32.com/eduke32@2028 1a8010ca-5511-0410-912e-c29ae57300e0
uint64_t gethiticks() and gethitickspersec(). For SDL 1.2, the timer
has the same resolution as getticks (1000 Hz). For Windows and SDL 1.3,
the resolution of the underlying perf-timers is used. The only user of
these functions right now is some TROR on-screen debugging code.
Revert an earlier change regarding r_preview_mouseaim. We can't do the
check because editstatus is set later.
git-svn-id: https://svn.eduke32.com/eduke32@2026 1a8010ca-5511-0410-912e-c29ae57300e0
the additional rendering pass
- Remove r_preview_mouseaim cvar from the game, since it's only for Mapster
- sdlmusic.c: (Failed) attempt to fix a call of waitpid() with a non-existent
process ID in the external MIDI playing code. I think there's a race there...
git-svn-id: https://svn.eduke32.com/eduke32@2025 1a8010ca-5511-0410-912e-c29ae57300e0
functionality, Polymost).
The new feature can be enabled/disabled with the 'r_tror_nomaskpass' cvar.
The basic idea is that when drawing lower or upper levels, a first pass
is performed that ignores all red walls for which the TROR nextwall link
'towards' the viewer arrives at a red wall. Thus, in the worst case, there
can be up to twice as many rendering passes now (when it is discovered that
the no-mask-pass isn't different that what would be drawn with the ordinary
one, the latter is skipped, since we've already drawn all needed geometry).
Hovever, this kind of multi-pass splitting is only suitable for simple scenes,
like the upper subway in the TROR test map. In particular, multiple islands
shouldn't 'see' each other.
Two issues are worth mentioning: first, care needs to be taken for translucent
ceilings or floors, since drawing them twice isn't the same as drawing them
once. This is done for classic, but not for Polymost. Second, sprites (which
are always drawn _after_ the geometry for a given pass) are still clipped to
the geometry of the ordinary pass, resulting in their disappearance from
certain angles.
--
Additionaly, a change made it into this commit that fixes redundant collection
of sprites in TROR:classic/Polymost.
git-svn-id: https://svn.eduke32.com/eduke32@2024 1a8010ca-5511-0410-912e-c29ae57300e0
- remove 'imageSize' global which was always yres*bytesperline and only used once
- some clearbuf() -> Bmemset() because I find the latter easier to read
- remove some clearbufs to 0 of some global arrays on init
git-svn-id: https://svn.eduke32.com/eduke32@2023 1a8010ca-5511-0410-912e-c29ae57300e0
always like this now:
ExtUninit -> (writesetup, misc.)
uninitengine -> (uninitsystem -> (uninit timers, mouse, ...))
exit()
Some paths still lead to a plain exit(), like failures in cache1d.c or mdsprite.c
git-svn-id: https://svn.eduke32.com/eduke32@2022 1a8010ca-5511-0410-912e-c29ae57300e0
with other than base levels, since the y*most arrays are copied there later.
git-svn-id: https://svn.eduke32.com/eduke32@2020 1a8010ca-5511-0410-912e-c29ae57300e0
handled could lead to a bunch whose floors and ceilings covered different
areas. A fix for the reduced functionality arising from this change is
underway.
- Rewrite a small portion of code using yax_vnextsec() in game.c.
git-svn-id: https://svn.eduke32.com/eduke32@2019 1a8010ca-5511-0410-912e-c29ae57300e0
dealing with sectors on the two sides of a bunch. Make yax_globallev and
yax_globalbunch variables non-static.
Rewrite a TROR-related bit in the engine code using the new function.
git-svn-id: https://svn.eduke32.com/eduke32@2018 1a8010ca-5511-0410-912e-c29ae57300e0
palette changed from the last one (either globally or within the last call of
one of the function). This fixes the ugly OSD flickering in 8-bit mode when
a screen tint effect is in action (such as when being hurt or snotted on).
git-svn-id: https://svn.eduke32.com/eduke32@2015 1a8010ca-5511-0410-912e-c29ae57300e0
effects:
1) Mouse turning works with SDL 1.3
2) The mouse pointer can't leave the window area with the console up, so that
focus always stays with the application
3) Menu selection using the mouse doesn't work. Not dramatic IMO.
git-svn-id: https://svn.eduke32.com/eduke32@2011 1a8010ca-5511-0410-912e-c29ae57300e0
is present (like in E4L1). Also sneak in a trivial change in cache1d.c
git-svn-id: https://svn.eduke32.com/eduke32@2010 1a8010ca-5511-0410-912e-c29ae57300e0
fix two issues with signed integer overflow. One is related to clipping
and the other to Polymost mouse-picking for overlong walls. Many more
remain especially in the 8-bit rendering code, but I expect many of
them to be intended.
git-svn-id: https://svn.eduke32.com/eduke32@2009 1a8010ca-5511-0410-912e-c29ae57300e0
is to remove a couple of 'inline's for functions with external linkage, which
seems to be a GCC convenience.
git-svn-id: https://svn.eduke32.com/eduke32@2008 1a8010ca-5511-0410-912e-c29ae57300e0
name into m->head.nam after loading (but before preprocessing for Polymer)
git-svn-id: https://svn.eduke32.com/eduke32@2007 1a8010ca-5511-0410-912e-c29ae57300e0
whenever we change to another renderer etc. and define it for the game and
editor. The purpose of the function is to clean up references to Polymer
resources like lights.
This fixes 1) all lights becoming spot lights in the game and 2)
an issue with maphack lights in the editor (can't recall which exactly).
git-svn-id: https://svn.eduke32.com/eduke32@2006 1a8010ca-5511-0410-912e-c29ae57300e0
Specifically, now also consider the sprite tile's yoffset, and fix an
issue when a tsprite got duplicated 'toward' the viewer. Also add a
couple of tests in trueror1.map.
git-svn-id: https://svn.eduke32.com/eduke32@2004 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the latter also correct when testing a map from the editor.
git-svn-id: https://svn.eduke32.com/eduke32@2001 1a8010ca-5511-0410-912e-c29ae57300e0
TROR portals that works with a little help from updatesectorz() (change not visible
from CON code). Relies only on the presence of an extension whose portal isn't
blocked and also plays nicely with corner cases like being shrunk and enabling
the jetpack. This should fix the upward moving platforms in WGR2.
git-svn-id: https://svn.eduke32.com/eduke32@1996 1a8010ca-5511-0410-912e-c29ae57300e0
on the command-line isn't found (instead of saying nothing)
* editor: Move inconsistent (stat&2)/heinum detection into the corruption
checker. This makes a lot of original maps spew countless 'errors', but
it's preferable for new maps since such floors and ceilings could behave
strangely with TROR.
git-svn-id: https://svn.eduke32.com/eduke32@1995 1a8010ca-5511-0410-912e-c29ae57300e0
In cases where performing occlusion queries for multiple red walls
leading to the same sector, we would sometimes leak a number of
query objects. This was apparently harmless on NVIDIA drivers, but
would leak tons of memory on ATI.
git-svn-id: https://svn.eduke32.com/eduke32@1993 1a8010ca-5511-0410-912e-c29ae57300e0
The code was using the Polymer-cached version of the sector cstat to
determine the translucency of its diffuse material, meaning it would
never get it right on the first try; that's what you get for having
completely different variables named 's' and 'sec'.
git-svn-id: https://svn.eduke32.com/eduke32@1991 1a8010ca-5511-0410-912e-c29ae57300e0
We normally enable backface culling always, but turn it off for
two-sided sprites; we need to make sure it's re-enabled after that
as sector masks are drawn after.
git-svn-id: https://svn.eduke32.com/eduke32@1990 1a8010ca-5511-0410-912e-c29ae57300e0
Some of the ROR code was operating under the assumption that drawasks
always correspond to one call of polymer_displarooms(), but that's not
necessarily the case; external view draws all sectors from the top
polymer_drawrooms(), which was causing crashes. Just ignore the sector
mask queues in external view mode, we already don't draw masked walls.
git-svn-id: https://svn.eduke32.com/eduke32@1982 1a8010ca-5511-0410-912e-c29ae57300e0
Check all the bunch siblings if we get a floor/ceiling hit and walk
them if their own planes hit.
git-svn-id: https://svn.eduke32.com/eduke32@1981 1a8010ca-5511-0410-912e-c29ae57300e0
When walking the sectors in displayrooms, detect floor/sector masks to
place them in a mask queue. The queues are allocated on the heap, but
a stack pointer is maintained by the displayrooms to allow it to play
nice with mirror recursion.
Right now the masks are drawn after all of drawmasks is finished; that
means you can see sprites and wall masks through sector masks, but not
the opposite. There is a slight attempt at blending far to near, but
nothing too conclusive yet; that means that in some cases some sector
masks won't be visible through other sector masks, but it should work
for trivial cases.
The next step would be to copy all the drawmasks logic into Polymer
and have it (attempt to) properly interleave sector masks where they
belong in the blending order.
git-svn-id: https://svn.eduke32.com/eduke32@1980 1a8010ca-5511-0410-912e-c29ae57300e0
Previously they would get counted both as 1-way walls for immediate
drawing and as mask walls for delayed drawing.
git-svn-id: https://svn.eduke32.com/eduke32@1979 1a8010ca-5511-0410-912e-c29ae57300e0
Assigns the right alpha value to floor/ceiling planes if their
translucency bits are set and make sure that changing the cstat now
triggers an update of the material for editing purposes.
This doesn't do anything by itself, but will be needed to correctly
draw floor/ceiling masks.
git-svn-id: https://svn.eduke32.com/eduke32@1977 1a8010ca-5511-0410-912e-c29ae57300e0
When walking the sectors, put more drawing work between queuing and
reaping the occlusion queries to potentially make them more efficient.
git-svn-id: https://svn.eduke32.com/eduke32@1976 1a8010ca-5511-0410-912e-c29ae57300e0
Enumerate the vertical siblings of each walked sector and check them
against the current frustum. No occlusion queries yet, but that should
correct any missing sectors until a flaw in that logic is discovered.
git-svn-id: https://svn.eduke32.com/eduke32@1975 1a8010ca-5511-0410-912e-c29ae57300e0
Reorganize polymer.c a bit to match the order of prototypes from the
header, move macros from the middle into the header.
git-svn-id: https://svn.eduke32.com/eduke32@1974 1a8010ca-5511-0410-912e-c29ae57300e0
- fix an earlier 'oops': make highpals load correctly again
- maphack lights shouldn't be double-loaded now
- slight tweak to the loading screen fadein/out timing
- two bound checks
- make some variables static in engine.c
git-svn-id: https://svn.eduke32.com/eduke32@1969 1a8010ca-5511-0410-912e-c29ae57300e0
which switches have been hidden in the original and user maps. One is to make
it face a wall, and another is to 'embed' it in e.g. the floor, like the
monitor with the burning fuse in E4L1. Both kinds show up when the switches
are rendered as models, revealing the secrets that the mapper sought to hide.
My proposal, implemented in this commit, is to apply a heuristic for such
switches at premap and make them invisible (set cstat bit 32768). The
conditions are re-checked during the game in case there is a switch coming
out of the floor, for example. A new spriteext bit is used for this feature.
git-svn-id: https://svn.eduke32.com/eduke32@1968 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes a ridiculous interaction problem between non-black fog and
additive lighting passes. Plagman is stupid.
git-svn-id: https://svn.eduke32.com/eduke32@1965 1a8010ca-5511-0410-912e-c29ae57300e0
by using setspritez() instead of setsprite() for the sectnum updating.
* Change 'yax-nextwall(0/1)' to 'upwall/downwall' in the corruption checker, makes it much nicer to read.
git-svn-id: https://svn.eduke32.com/eduke32@1959 1a8010ca-5511-0410-912e-c29ae57300e0
* make Ctrl-Alt-A (formerly 'toggle inner gray walls') now remove all gray walls entirely in 2d mode
* make r_usenewaspect enabled by default
git-svn-id: https://svn.eduke32.com/eduke32@1957 1a8010ca-5511-0410-912e-c29ae57300e0
* fix breaking out of 'switch' blocks and compilation of the 'default' case
* Have a way of assigning 'special function' menu [' F] entries to script states. Writing a string literal after the state name will register the state under that name. Menu names are limited to 24 characters and it's possible to have up to 16 of them.
* new branching command 'ifinteractive', true if a state runs from the menu mentioned above.
* new command: getnumberfromuser <<retvar>> "query_string" <maxnum> <flags>
See 'state collect_teleporting_sectors' in a.m32 for a combined usage of the new functionality.
git-svn-id: https://svn.eduke32.com/eduke32@1955 1a8010ca-5511-0410-912e-c29ae57300e0
* helper feature: when shade preview is enabled, the ceilings and floors of highlighted sectors are shown in pal 6. This makes it possible to highlight the TROR-joining candidate sectors in 3D mode using e.g. 'sethighlightsector searchsector 1' while aiming at the respective ceilings and floors, and get visual feedback.
* when failing TROR-joining early ('no consistent joining combinations found'), print to the console why it failed.
* more Makefile.deps updating
git-svn-id: https://svn.eduke32.com/eduke32@1952 1a8010ca-5511-0410-912e-c29ae57300e0
* New shade/visibility calculation code, which is activated with 'r_usenewshading' (on by default), and is closer to the classic look. Also tweak the FOGSCALE macro to have approximately the same fog distance with all renderers.
* Mapster32: END modifier to RShift. If it's pressed when RShift is released, sprites which are in grayed out sectors are also selected; Make changing shade affect all highlighted sprites in 3D mode (when aiming at one of them).
* some debug code to watch out for suspicious glGenTexture/glDeleteTextures calls, not active.
git-svn-id: https://svn.eduke32.com/eduke32@1943 1a8010ca-5511-0410-912e-c29ae57300e0
First, it is now possible to disable the memcache (which is there to cache the texcache) by setting the new cvar 'r_memcache' to 0. Do this if you're constrained on memory or getting crashes when e.g. doing vidrestart often. Also, the memcache will disable itself (and free its storage, if it's there) the first time it fails to allocate.
Fix a strcpy with identical arguments in game.c and a couple of uninitialized mem accesses related to Polymer lights.
git-svn-id: https://svn.eduke32.com/eduke32@1941 1a8010ca-5511-0410-912e-c29ae57300e0
The main feature is the addition of -mx and -mh command-line parameters to EDuke32 and Mapster32. These parameters include a con and def "module" respectively. This translates into essentially including the file from the bottom of the compiled script.
I fixed the classic buggy behavior of the BROKEHYDROPLANT and REACTOR2 sprites.
I also fixed a small, long-standing bug where FRAMEEFFECT1 blurs are not affected by sector floorpal. You can see one example of this by shrinking the Enforcer on the upper inside of the toppled building in E3L11: Freeway.
I tweaked the Makefile so that it would automatically regenerate the keep.me files in the $(OBJ) and $(EOBJ) directories after they are deleted for cleaning.
One final change is a slight positioning cleanup of both programs' --help dialog boxes.
git-svn-id: https://svn.eduke32.com/eduke32@1937 1a8010ca-5511-0410-912e-c29ae57300e0
Usage: For an ANM file <somefile>.anm/ANM, EDuke32 looks for <somefile>.ivf, which is the VP8 stream transported by an IVF container. It can be extracted from a WebM file with e.g.
mkvextract tracks <filename>.webm 1:<filename>.ivf
(part of Mkvtoolnix, the Matroska toolset)
Libvpx is required, and the 'YUV'-->RGB conversion is implemented using a fragment shader, so it's for OpenGL modes only. Also, this commit doesn't enable the code.
Unfinished: sound, aspect correction for fullscreen w/ non-square pixels, ... ?
---
Make MAXNODESPERLINE in engine_priv.h actually a macro that depends on MAXYSAVES and MAXDIM instead of using the obsolete precomputed value. I think this might have been the cause for the latest patched-up overhead view crash.
git-svn-id: https://svn.eduke32.com/eduke32@1933 1a8010ca-5511-0410-912e-c29ae57300e0
* Read-only CON access to sector bunchnums by adding the labels '.ceilingbunch' and '.floorbunch' to the CON sector structure
git-svn-id: https://svn.eduke32.com/eduke32@1931 1a8010ca-5511-0410-912e-c29ae57300e0
* slightly tweaked status line, now also displaying the number of bunches
* fix a couple of issues unearthed by valgrind and a TROR nextwall corruption when joining sectors
git-svn-id: https://svn.eduke32.com/eduke32@1930 1a8010ca-5511-0410-912e-c29ae57300e0
* it is now possible to paste (and have an outer red wall automatically) highlighted sectors into a sector that is extended on one side and non-sloped on the other. For this, the highlighted sectors must be in one connected component.
* Make it possible to not display inner gray walls, toggled with Ctrl-Alt-A, but only when no manual grayout (Ctrl-R) is in effect.
* bugfix: don't clear original TROR-nextwall link when duplicating extended highlighted sector
* m32script: protect wall members relevant to TROR
* save autogray (Ctrl-A) and showinnergray (see above) to mapster32.cfg
git-svn-id: https://svn.eduke32.com/eduke32@1928 1a8010ca-5511-0410-912e-c29ae57300e0
- sethighlightsector <sectnum> <on?>
- updatehighlightsector
- collectsectors <<array_to_collect_sectnums>> <initial_sector> <<num_collected_sectors>> <sector_filtering_state>
The latter does a breadth-first search starting from an initial sector and collects nextsectors only when the filtering state, given a sectnum as RETURN input, writes a nonzero value into RETURN. As a usage example, a.m32 includes the state 'collect_teleporting_sectors', that collects all sectors containing an SE7 and highlights them afterwards. This way, it should be possible to retrofit old maps with TROR by distributing small scripts that do most of the work (right now, joining has to be done by hand, though).
* corruption checker: for the 'nextwall inconsistent with nextsector' corruption, suggest an alternative fix by searching fitting nextwalls and changing the nextwall of the corrupt wall (as opposed to the nextsector). It will display with a leading '?' in the listing, and can be demanded by suffixing 'corruptcheck tryfix' with it. For example,
corruptcheck tryfix 9-21 ?
would fix some corruptions in Billy Boy's cranium.map without introducing drawing errors.
* fix demo playback (tueidj figured this out)
git-svn-id: https://svn.eduke32.com/eduke32@1927 1a8010ca-5511-0410-912e-c29ae57300e0
* When dragging highlighted sprites, do a setsprite() after each position update. This way, they won't end up on the wrong level
* TROR support for SE 31 and 32 in-game, example provided in test map
* some uncommited stuff for TROR: SE 6/14
git-svn-id: https://svn.eduke32.com/eduke32@1924 1a8010ca-5511-0410-912e-c29ae57300e0
* Make the minimum resolution possible 640x480. Sometimes you'd accidentally enter something like 'vidmode 800 60' and crashes would ensue...
* fix a warning
git-svn-id: https://svn.eduke32.com/eduke32@1921 1a8010ca-5511-0410-912e-c29ae57300e0
