Added, Draw Line and Draw Curve modes: added "Auto-finish drawing" setting. When enabled, the modes will automatically finish drawing when currently drawn lines and already existing level geometry form a closed shape.
Changed: sector-wise linedef flipping is now done using the new "Align Linedefs" action. "Flip Linedefs" action works the same as in DB2 again.
Changed: when a map was already loaded, using "Open Map" action will use that map's directory as the starting directory.
Changed: official IWADs can no longer be saved.
Changed: disabled lump ranges/duplicate entries checks for official IWADs.
Changed: wad type is now preserved when saving a map (previously all wads were saved as PWADs).
Changed: moved Updater.exe launch much closer to the editor termination point to avoid any chance of it closing the editor before it properly closes itself.
Updated ZDoom_DECORATE.cfg (A_Blast).
Updated documentation.
Changed, Game configurations: "Polyobject Anchor" things should not trigger "Thing outside the map geometry" error in the Map Analysis mode.
Updated ZDoom_DECORATE.cfg (A_SetScale).
Changed, all drawing modes: changeable drawing mode settings are now persistent.
Changed: "Dynamic grid size" mode is now disabled when changing grid size manually.
Documentation: "Command Line Parameters" topic contained a lot of incorrect information...
Updated ZDoom_DECORATE.cfg.
Added, DECORATE parser: damage types are now parsed.
Added: the editor now reports duplicate textures/flats/patches/sprites/colormaps/voxels in the loaded wads.
Added, all text parsers: added #region/#endregion support.
Added TERRAIN parser.
Added, Script Editor: added special handling for DECORATE special comments.
Added, Sector Edit window, UDMF: Soundsequence value was setup incorrectly when showing the window for multiple sectors with mixed Soundsequence value.
Fixed, Map Options window: "Strictly load patches between P_START and P_END" was not applied when applying the changes.
Fixed, MAPINFO parser: MapInfo should be treated as defined when a map MAPINFO block corresponding to current map is encountered even if it doesn't define any properties recognized by the editor.
Fixed, all text parsers: in some cases error line was calculated incorrectly when reporting an error detected by a text parser.
Cosmetic: changed ' to " in the rest of Error and Warning messages.
Internal: added text resource tracking.
Updated ZDoom_DECORATE.cfg.
Updated documentation ("Game Configuration - Basic Settings" page).
Fixed, Map Analysis window: fixed an exception on copying warnings to clipboard when the clipboard was used by other application.
Fixed, TEXTURES parser: added special handling for "TNT1A0" sprite name so a texture with this sprite as a single patch is no longer treated as failed loading.
Fixed, Visual mode: in some cases (like line slopes used in several adjacent sectors) sector effect updates were triggered multiple times for the same sector, resulting in noticeable slowdowns and in some cases in infinite recursion.
Updated ZDoom ACC.
Fixed, Script Editor: auto-complete can now show the same term several times when it's case is different (like DECORATE's "Bright" keyword and "BRIGHT" flag).
Game configurations, ZDoom: updated "Scroll_Floor" and "Scroll_Ceiling" linedef action argument definitions.
Updated ZDoom_ACS.cfg (Ceiling_CrushAndRaiseSilentDist).
Updated ZDoom_DECORATE.cfg (A_SetChaseThreshold).
Fixed, Script Editor: auto-completion and syntax highlighting now works for properties with dots (like "Powerup.Color") and colon (like "See:").
Fixed, Linedef info panel, Hexen map format, cosmetic: activation type should be enabled when the line has an action assigned, even if it's default activation.
Updated ZDoom_linedefs.cfg (Line_SetPortal).
Fixed, Script Editor, ACC: auto completion for keywords starting with "#" char was not handled properly.
Fixed, Script Editor: replaced the native Scintilla library with the one supplied with SciTE 3.6.2. The Script Editor should now work on Windows XP.
Changed, Script Editor, search: all fold blocks are now unfolded when search result is inside a folded block.
Updated ZDoom_ACS.cfg.
Updated ZDoom_DECORATE.cfg.
Updated ZDoom ACC to git rev. 6bb023d.
Fixed, General interface, cosmetic: in some cases the warnings label was disabled in a flashing state (e.g. with red background).
Internal: moved some older GZDB actions form GZGeneral to MapManager. They can no longer be toggled when no map is loaded (which is probably for the best).
Updated ZDoom_ACS.cfg.
Updated ZDoom_DECORATE.cfg.
Changed, Script Editor: pressing Ctrl-S when fixed compilable script tab (like SCRIPTS tab) is selected now compiles the script.
Fixed, Error Logger: fixed slowdowns when adding lots of errors and "Errors and Warnings" window was opened.
Fixed, Script Editor: text caret was incorrectly positioned after selecting a function in the navigator dropdown.
Fixed, Script Editor: incorrect ACS configuration was used for SCRIPTS lump for maps in Hexen map format for ZDoom-based engines.
Internal, rendering: added more error reporing-related code to D3DShader.LoadEffect().
Updated ZDoom_DECORATE.cfg.
Added, Visual mode: highlight/selection based on texture alpha now works on 3d floors.
Changed, Game configurations, TranslucentLine:208 action: renamed the second argument from "Translucency Amount" to "Opacity".
Internal, documentation: updated udmf_zdoom.txt.
Fixed, Visual mode: textures on floors, ceilings and single-sided wall parts are now rendered ignoring texture alpha.
Changed, Game configurations, Sector_Set3dFloor:160 action: renamed the fourth argument from "Alpha" to "Opacity".
Fixed, Visual mode: UDMF sidedef brightness should be ignored when a wall section is affected by Transfer Brightness effect.
Fixed, Visual mode: any custom fog should be rendered regardless of sector brightness.
Fixed, Visual mode: "fogdensity" and "outsidefogdensity" MAPINFO values were processed incorrectly.
Fixed, Visual mode: in some cases Things were rendered twice during a render pass.
Fixed, Visual mode: floor glow effect should affect thing brightness only when applied to floor of the sector thing is in.
Fixed, TEXTURES parser: TEXTURES group was named incorrectly in the Textures Browser window when parsed from a WAD file.
Fixed, MAPINFO, GLDEFS, DECORATE parsers: "//$GZDB_SKIP" special comment was processed incorrectly.
Fixed, MAPINFO parser: "fogdensity" and "outsidefogdensity" properties are now initialized using GZDoom default value (255) instead of 0.
Added "Toggle sky rendering" action and toolbar button.
Added, MAPINFO parser: the editor now recognizes map number from classic map definition format. Hexen MAPINFO is now properly parsed.
Added, MAPINFO support: if current map definition contains map name as a text string, it will be shown in the editor's header.
Changed: "Toggle dynamic lights rendering" now toggles between "Don't show dynamic lights" and "Show dynamic lights" when used in Classic modes.
Changed, Things mode: lowered the opacity of dynamic light radii.
Changed, (G)ZDoom text parsers: empty include files now trigger a warning instead of an error and no longer abort parsing.
Fixed, Game configurations: moved Stalagmite:5050 thing to Doom block (so the editor no longer tries to load it for non-Doom game configurations).
Fixed(?), Visual mode: probably fixed a hard-to-trigger exception when sorting translucent geometry.
Fixed, Visual mode: floor glow effect was incorrectly applied to walls (was broken in R2452).
Internal: restructured most of MAPINFO and GLDEFS parsers. Should be more maintainable now.
Updated ZDoom ACC.
Updated zdbsp to 1.19.
Updated documentation.
Fixed, Map Analysis mode: fixed a crash when trying to dissolve an invalid sector when one of it's linedefs referenced it on the both sides.
Fixed, Sectors mode: fixed incorrect undo description when deleting sectors.
Internal: joined declaration and assignment of some more variables.
Fixed, ANIMDEFS parser: camera texture names are limited to 8 chars in ZDoom.
Fixed, Game configurations: Stalagtite:47 thing was named Stalagmite.
Changed, Game configurations: moved Stalagmite:5050 thing to the "Obstacles" category.
Fixed, Script Editor: in some cases clicking on an error in the errors list didn't navigate to the error location.
Fixed, Script Editor: in some cases incorrect error line number was shown.
Fixed, Text lump parsers: fixed a crash when trying to get a filename from a quoted string with missing closing quote.
Fixed, Text lump parsers: in several cases parsing errors were ignored by overlaying data structures.
Fixed: in some cases Thing Filter thing flags were cleared when switching game configurations in the "Game Configurations" window.
Changed, PK3 reader: loading of files with invalid path chars is now skipped instead of skipping loading of the whole resource. Also more helpful warning message is now displayed.
Updated SharpCompress library to v.0.11.2.0.
Changed, Image formats: GIF images will no longer be loaded, because (G)ZDoom doesn't support them.
Updated ZDoom_DECORATE.cfg.
Updated ZDoom_ACS.cfg.
Updated ZDoom ACC.
Added: Tab text now looks differently when appropriate script was changed.
Added: Script Editor now has it's own status bar.
Added: several files can now be opened at once when using "Open File" command.
Added: ACS scripts navigator now shows script and function arguments.
Changed: when closing a tab, previous tab is selected instead of the first tab.
Changed: SCRIPTS lump can't be compiled as a library.
Changed: external acs files can only be compiled as libraries.
Changed: when an external acs file is marked as #library, it will be saved as [library name].o alongside [filename].acs.
Fixed: files opened using "Open File" command were immediately flagged as changed.
Fixed: Script Editor was unable to navigate to error location after clicking on the error description when the error was in include file.
Updated ZDoom ACC.
Fixed, Script Editor, cosmetic: we should not show error line number when we don't have one.
ZDoom acc.exe: several error types now output more detailed info.
Fixed, Visual mode: UDMF thing alpha property was applied only when UDMF renderstyle property was also set (should also be applied when renderstyle property is set in the DECORATE actor definition).
Game configurations, ZDoom family: Pistol and Gold Wand actors now use internal sprites.
Updated ZDoom ACC and ZDoom_ACS.cfg (PickActor flags).
Edit Action window: Actions list is now automatically focused on mouse over. When Actions list is focused, you can now start typing to change the Filter.
Edit Effect window: Effects list is now automatically focused on mouse over. When Effects list is focused, you can now start typing to change the Filter.
Game Configurations: added "Gold Wand" to all ZDoom-based Heretic configurations (also a couple of cosmetic tweaks).
Game Configurations: changed "Pistol" display sprite to the one provided with (G)ZDoom.
Fixed, Classic modes: 3d floor linedef indicators shown in Classic modes were not updated after finishing sector drawing.
Updated ZDoom ACC to git rev. f92fbb9.
Updated ZDoom_ACS.cfg.
Fixed: only one test engine should be launched from the editor at any given time.
Changed: SVN builds now include debug symbols.
Internal: VersionFromSVN.exe can now work from a network drive.
Updated ZDoom ACC to git rev. 3071c32.
Updated ZDoom_DECORATE.cfg ("A_Warp").
Fixed: "Select Things in Selected Sectors" action was clearing selected sectors without updating the display.
Changed, Sectors mode: number of selected things is now displayed in the info panel.
Changed, Game Configurations window, "Testing" tab: game engine executable browser now opens up when clicking the "Add game engine" button.
Changed, Game Configurations window, "Testing" tab: default game engine display name is now generated from the folder name game engine executable is in.
Changed, Visual mode: Sector_Outside (87) sector effect is now taken into account when determining sector fog color.
Game configurations: added "defaultwalltexture", "defaultfloortexture" and "defaultceilingtexture" parameters. These define textures used when drawing a sector (usually the first sector of a map only).
Game configurations: classic game configurations now use "-warp" command to load the map.
Game configurations: factorized testing parameters into "Includes\Test_params.cfg".
Added internal functions to Hexen acs scripting configuration.
Updated documentation ("Game Configuration - Basic Settings" topic).
Added "makedoorceil" game configuration property. Works the same way as "makedoortrack" and "makedoordoor", but for ceilings of door sectors.
Changed, Game configurations: the editor no longer tries to load DECORATE/MODELDEF/VOXELDEF/GLDEFS/REVERBS lumps when "decorategames" setting is not specified / is set to empty string.
Changed, General interface: "Tools -> Reload MODELDEF/VOXELDEF" and "Tools -> Reload GLDEFS" menu items are no longer shown when current game configuration doesn't support DECORATE.
Fixed a crash when pasting linedef/thing properties in Hexen map format.
Fixed, Visual mode: Visual Thing resources were not fully unloaded when resetting D3D device leading to crash when switching to the editor from a DX-using game engine (like ZDoom) running in fullscreen.
Fixed: in some cases, when current game configuration supported multiple script compilers, it was possible to open/create a map or change map options without selecting any script compiler.
Fixed, New Map Options window: default map name was not updated when switching game configurations.
Fixed: copied map element properties were not reset after switching to another map.
Fixed: stored textures for "Make Door" action were not reset after switching to another map.
Fixed, Game Configurations window: currently selected test engine name was not updated when pasting test engines from another configuration.
Fixed, Game Configurations: all "Heretic in Doom map format" configurations were using Doom sector effects list.
Fixed, Game Configurations: all "Strife in Doom map format" configurations were using Doom sector effects list.
DECORATE: added "$obsolete" special comment. When present, it marks the thing as obsolete. It will be detected by "Check obsolete thing" Map Analysis Mode check and will be marked in the Thing Properties Window and the Thing Info panel.
Map Analysis mode: added "Check obsolete things" check.
Updated documentation ("DECORATE keys" page).
Updated ZDoom_DECORATE.cfg.
Added "Paste Properties Special" actions in "Classic" and "Visual" categories. They work the same way as "Paste Special" action.
Added: "Copy Properties", "Paste Properties" and "Paste Properties Special" options are now shown in the Edit menu if current classic mode supports them.
Changed, Paste Properties Special window: only options relevant to current map format are now displayed.
Changed, Paste Properties Special window, UDMF: all UI-managed options are now available.
Fixed: MAPINFO parser was unable to process "include" directives.
Fixed, General interface: selection info was reset to "Nothing selected" after few seconds regardless of current selection.
Fixed, Visual mode: thing bounding boxes were not updated when changing things positions using Randomize mode.
Fixed, Visual mode: event lines were displayed at incorrect height when entering Visual mode for the first time.
Fixed, Texture Browser window: when MixTexturesFlats Game Configuration option is disabled, textures/flats are no longer shown in the Used group when flats/textures with the same names are used in the map.
Fixed(?): probably fixed an exception some users reported when trying to initialize a Classic mode after switching from Visual mode with "Sync cameras" option enabled.
Changed, Game configurations, Thing Categories: a block must have at least one thing category property to be recognized as a thing category.
Changed, Visplane Explorer: the plugin now outputs more info when it fails to initialize vpo.dll.
Cosmetic, Thing Edit window, Doom/Hexen map format: adjusted UI layout so thing flags control no longer displays scrollbars in Hexen map format.
Internal: merged methods from UDMFTools into UniFields, removed UDMFTools.
Updated Inno Setup script (added VC++ 2008 SP1 distributive).
Updated ZDoom_DECORATE.cfg (A_CheckBlock).
Updated documentation (added "System Requirements" page).
Visual mode: fog distance calculation is now much closer to GZDoom one.
Visual mode: thing brightness calculation when a thing is affected by floor glow is now much closer to GZDoom one.
Linedef edit window, UDMF: added "Reset front/back brightness" buttons.
Sector edit window, UDMF: added "Reset ceiling/floor brightness" buttons.
Internal, Visual mode, Things mode: persistent event lines are now updated only when map objects are changed instead of doing it on every display redraw.
Internal: improved Dictionary lookup times when using map objects and textures as keys.
Internal: added "Release + Profiler" solution configuration.
Updated ZDoom_ACS.cfg (Warp).
Fixed, UDMF parser: parser failed to parse decimals stored using scientific notation (like "1E-06").
Fixed, UDMF parser: incorrect line numbers were shown when displaying errors.
Changed, UDMF parser: many error descriptions are now more detailed.
Updated ZDoom ACC to Git rev. ae5f036.
Added, Visual mode, DECORATE: "RenderStyle" property is now partially supported.
Added, Visual mode, DECORATE: +BRIGHT flag is now supported.
Added, Visual mode, UDMF: "Alpha" thing property is now supported.
Added, Visual mode, UDMF: "RenderStyle" thing property is now partially supported.
Added, Visual mode, Hexen map format and UDMF: "Translucent" and "Invisible" thing flags are now supported.
Added, Game Configurations: added "alpha" and "renderstyle" Thing and Thing Category properties.
Fixed, Visual mode: blockmap was not updated when moving things using "Move Thing Left/Right/Forward/Backward" and "Move Thing to Cursor Location" actions.
DECORATE parser: added a warning when unable to find actor's parent class.
Internal: current map format can now be checked using "General.Map.UDMF", "General.Map.HEXEN" and "General.Map.DOOM" properties.
Updated documentation ("Game Configuration - Things Settings" page).
High-DPI: fixed many issues with incorrect controls size (Tag selector width, Comment Editor size, icons size, tabs size etc.).
Cosmetic: changed map geometry dragging undo messages to more descriptive ones.
Fixed, Textures Browser, cosmetic: "Show textures in subdirectories" checkbox should be repositioned when "Long texture names" one is invisible.
Updated ZDoom_DECORATE.cfg (added A_SetFloatSpeed + a couple of fixes).
Fixed, Numeric textbox: incorrect character was treated as decimal separator character was used when using certain Windows regional settings.
Changed, Edit Things window: when applicable, the "Filter" textbox is now focused when opening the window.
Changed, Sector Effects browser window: when applicable, the "Filter" textbox is now focused when opening the window.
Changed, Edit Things window: when the "Filter" textbox is focused, pressing the "Down" key will now switch focus to the Things list.
Changed, Sector Effects Browser window: when the "Filter" textbox is focused, pressing the "Down" key will now switch focus to the Effects list.
Changed, Linedef Action Browser window: when the "Filter" textbox is focused, pressing the "Down" key will now switch focus to the Actions list.
Configurations, Doom map format thing flags: changed "Multiplayer" flag name to "Multiplayer only".
Removed, Texture Browser: removed "Show image sizes" checkbox. "Show texture and flat sizes in browsers" preferences setting is now used instead.
Fixed, Things mode: event line between pre-last and the last PatrolPoint was not drawn.
Fixed, Things mode: highlight range for sizeless things (things with "fixedsize" game configuration property) was calculated incorrectly.
Fixed: fixed a crash when opening Script Editor after using "Open map in current wad" command to switch to UDMF map with SCRIPTS lump when current script configuration was not saved in the wad's .dbs file.
Fixed: map closing events were not triggered when using "Open map in current wad" command, which could potentially result in plugin crashes/incorrect behavior.
Fixed: Sector Drawing overrides panel could trigger an exception when closing the map during resource loading.
Internal: added "Debug + Profiler" solution configuration, added 2 profiling methods to DebugConsole.
Internal: rewrote MainForm.DisplayStatus() / StatusInfo to handle selection info in a more structured way.
Fixed, internal: some destructors could potentially be executed more than once potentially leading to exceptions. Other destructors were not called at all.
Updated ZDoom_DECORATE.cfg.
Probably fixed an exception when trying to check which program(s) lock the map file on Windows XP.
Changed: added an option to try to close all programs, which lock the map file when saving the map and the map file is locked (requires Windows Vista or newer).
Fixed, Preferences window: some trackbars had incorrect background color.
Fixed, General interface: in some cases status messages were almost immediately replaced by selection info messages.
Fixed, Edit Selection mode: sector highlight was not updated when switching from Edit Selection to Sectors mode.
Fixed, Edit Selection mode, UDMF: in some cases texture scale Y was flipped when applying/canceling changes made in the mode.
Probably fixed a crash caused by uninitialized Association when highlighting map elements.
Fixed, Comments Panel plugin: selection info was not updated when selecting map elements in the side panel.
Fixed, Tag Explorer plugin: selection info was not updated when selecting map elements in the side panel.
Fixed a typo in Hexen_things.cfg.
Changed, Drag Linedefs/Vertices/Sectors/Things modes: line length labels are now displayed the same way as in Draw modes.
Changed, Drag Linedefs/Vertices/Sectors/Things modes: "lock movement to cardinal directions" mode (Alt-Shift-Drag) now locks movement in 4 directions instead of 8 and doesn't snap map elements to nearest grid intersections when they are not aligned to it.
Added, Visual mode, GZDoom, DECORATE: FORCEXYBILLBOARD flag is now supported.
Added, Visual mode, GLOOME, DECORATE: FLOORSPRITE, CEILSPRITE, WALLSPRITE, ROLLSPRITE and STICKTOPLANE flags are now supported (implementation is somewhat broken ATM and probably doesn't work the same way as in GLOOME, because Windows build with most these features is nowhere to be found...).
Fixed, Visual mode: in some cases Thing brightness was calculated incorrectly.
Updated ZDoom_DECORATE.cfg.
Changed, General interface: all main menu toolbars are now visible when starting the editor for the first time.
Changed, General interface: "Prefabs" and "Edit" menus are now hidden when no map is loaded.
Changed, General interface: moved "Dynamic Grid Size" menu item to the "Edit" menu, also moved the button to the matching position on the toolbar.
Changed, General interface: changed "Show Comments" menu item position in the "View" menu, also moved the button to the matching position on the toolbar.
Game configurations: removed "gamedetect" block, because it was unused by the editor.
Updated documentation ("Map Format Settings" page).
Game configurations: removed "GZDoom only" from FraggleScript actions (because FraggleScript can be used in ZDoon).
Internal: fixed a couple of bugs in DebugConsole.StopTimer();
Changed, Linedef/Thing Info panel: when displaying a linedef/thing with an ACS special, which uses a script with arguments, appropriate action argument names are replaced with script argument names.
Changed, Sector/Linedef/Thing Edit windows, Comments tab: window is no longer closed when pressing Enter while editing a comment. Newline is inserted instead.
Changed: Script Editor window is now toggled to normal state when pressing "Show Script Editor" button if said window was already open, but minimized.
Fixed: in some cases action arguments were not cleared during setup when displaying multiple map elements with mixed argument values.
Internal: added ArgumentsControl.
General interface: selection info is now always displayed.
Visual mode: you can now hold Alt-Shift or Ctrl-Alt while selecting sidedefs to stop selecting connected sidedefs when already (un)selected sidedef is encountered.
Added, Numeric Textbox: you can now use "+++" and "---" prefixes to incrementally increase or decrease result values by given value.
Fixed, Numeric Textbox: fixed a potential divide by zero exception when using "/" prefix in numeric textboxes with decimal input enabled.
Fixed, Thing Info panel: relative z position of things with "+SPAWNCEILING" flag was incorrect.
Changed: Update checker now displays messages using MessageBoxes when called manually.
Map Analysis: changed result descriptions for Unknown Texture and Missing Texture checks.
Doom map format: renamed "Secret" linedef flag to "Shown as 1-sided on automap".
Updated ZDoom_DECORATE.cfg (A_RadiusGive stuff).
DECORATE: added "//$ArgNEnum" special comment. It can be used to specify an enum to use with the argument.
Documentation: updated "Action Argument Settings" and "DECORATE keys" pages.
Game Configurations: updated things in ZDoom "Bridges" category to use argument types 23 and 24.
Documentation: added "Action Argument Settings" page, updated "Basic Settings", "Map Format Settings", "Linedefs Settings" and "Things Settings" pages in Configurations -> Game Configurations group.
Documentation: updated "DECORATE keys" page.
Game configurations, Strife, Doom map format: several thing flags were named incorrectly.
Game configurations, Strife, Doom map format: several linedef flags were listed as "Unknown".
Edit Selection mode: 15-degree rotation steps require more precision...
MAPINFO: added "DoomEdNum" and "SpawnNums" blocks support.
MAPINFO: added "#include" directive support.
MAPINFO: added "$gzdb_skip" special comment support.
DECORATE: "spawnthing" Game Configuration block is now updated using "SpawnID" actor property.
Game configurations: added "class" property to the most of ZDoom things.
Actions: removed "Reload MAPINFO" action.
Documentation: merged "GLDEFS and MODELDEF support", "(Z)MAPINFO support" and "TEXTURES support" topics into "(G)ZDoom text lumps support", added info about the other text lumps GZDB can use.
Renamed the default program configuration file from "GZBuilder.cfg" to "GZBuilder.default.cfg".
Changed the default keys of "Move Thing Left\Right\Forward\Back" actions to arrow keys (was Ctrl + arrow keys).
Updated documentation: added "Command Line Parameters" topic.
Visual mode: added support for "Transfer Floor Brightness" (210) effect.
Visual mode: added support for "Transfer Ceiling Brightness" (211) effect.
Visual mode: changed the way thing brightness is calculated. Should be closer to GZDoom now.
Sector Edit Form: you can now enter "++" or "--" into "Height Offset" input to raise or lower sectors by their height.
Cosmetic fix in ZDoom_linedefs.cfg.
Changed, Numeric textboxes: trailing zeros are no longer displayed to reduce visual noise.
Fixed, paired numeric controls: in some cases culture-specific decimal separator was not used.
Fixed, map loading: inability to initialize D3D device is now handled a bit more gracefully.
Fixed, main toolbar context menu: we should suppress context menu closing only when user clicks on a menu item while holding Shift key.
Fixed, Game configurations: several Skulltag things were not included in many Zandronum game configurations.
Added, Game configurations: added "thingclasshelp" property. It's used to open a website when thing class name is clicked in the Thing Edit form.
Changed, "Raise/Lower sector to nearest" action: 3d floors are now taken into account when using the action on things.
Updated documentation.
Info panels: float values are now formatted regardless of current CultureInfo (e.g. decimal separator is now always dot). Also, they are no longer clamped to 2 decimal places.
Updated ZDoom_ACS.cfg.
Changed, Thing Edit Form (UDMF): rearranged Action and Identification groups to match the rest of the Edit forms.
Changed: Classic Thing Edit form no longer has tabs.
Fixed, Visual mode, UDMF: sector geometry cache was not updated after using "Match Brightness" and "Change Brightness" actions on ceilings, so the changes made by them were not visible when using Classic modes in "View Ceiling Textures" mode.
Fixed, Visual mode, UDMF: "Match Brightness" and "Change Brightness" actions set brightness incorrectly in some cases.
Fixed: ACS script names gathering logic was unable to process relative #include and #import paths (like '#import "..\acs\qtilt.acs"').
Updated ZDoom_DECORATE.cfg.
Visual mode: when "Synch camera position" setting is enabled, and the cursor was outside of a sector when entering Visual mode, camera height is now adjusted based on nearest sector (previously the height was adjusted only when the cursor was inside of a sector).
"Auto-align textures X", "Auto-align textures X and Y" actions, UDMF: alignment source sidedef part's horizontal scale is now applied to all aligned sidedefs.
Visual mode, UDMF: 'lightfog' flag is now automatically updated when changing sidedef brightness or using "Match Brightness" action.
Linedefs mode: added "Update 'lightfog' flag" menu item.
Game configurations: cosmetic changes in UDMF linedef flag names.
Updated ZDoom_DECORATE.cfg.
Fixed, long texture names support: in some cases long texture names were not processed correctly when pasting map geometry.
Fixed, Visual mode: in some cases combined sidedef brightness was calculated incorrectly. Also, MAPINFO FadeColor and OutsideFogColor properties are now taken into account.
Hexen_linedefs.cfg: "Door Raise" and "Door Locked Raise" used incorrect enums for "Close Delay".
Fixed, Visual mode, UDMF: when several wall parts were selected, only one could be dragged with the mouse.
Fixed, Visual mode, Auto-align textures, UDMF: TEXTURES scale is now taken into account when aligning textures.
Fixed, Visual mode, Auto-align textures (Y), UDMF: nearest height matching is now applied to non-wrapped middle backsides.
Cosmetic changes in ZDoom_ACS.cfg.
Sound Environment Mode: sound environments can now be picked by editing sound environment things.
Sound Environment Mode: detected sound environments names are now used as item names in the tree view.
Fixed, Classic modes: incorrect texture was used as unknown floor/ceiling texture (I broke this in r2199).
Fixed, MainForm: reverted MainForm.UpdateToolStripSeparators. By making it look simpler I made it work more buggy...
Updated ZDoom_DECORATE.cfg.
Moved stuff around a bit in PK3Reader. Will it fix random crashes? I dunno, a least I was no longer able to trigger them...
Recompiled SharpCompress library using VS 2008, so it no longer references .net 4.0 stuff. Will it fix random crashes? See above.
PK3Reader: probably fixed a random sharpcompress crash when trying to access a closed file (totally unsure, need more testing).
ZDoom_linedefs.cfg: fixed a typo.
Nodes Viewer mode: added more boilerplate to classic nodes reader.
Thing Filters Form: program configuration was not marked as changed when saving thing filters.
Cosmetic layout fixes in Thing/Linedef/Sector Info panels.
Cosmetic text fixes in several Map Analysis results.
Internal: debug console is now cleared when creating a new map.
Updated ZDoom_DECORATE.cfg.
Statistics control: things count was not updated when adding or deleting things.
Map Analysis mode: "Check texture alignment" is now disabled by default.
Updated Inno Setup script and images.
Added DirectX web installer to Builder\Setup.
Updated MakeRelease.bat.
Updated ZDoom_DECORATE.cfg.
Fixed, Nodes Viewer Mode: the mode was unable to handle missing node lumps properly.
Fixed, Nodes Viewer Mode: the mode no longer builds nodes when unable to find both classic nodes and ZNODES at the same time.
Removed SlimDX installer, because it's no longer required.
Internal: debug console is now cleared when opening a map.
Internal: changed the way apppath is acquired. It should no longer fail when launching the editor from a shared network folder.
Main Form: changed some labels of dynamic light and model rendering selectors to be less confusing.
Updated ZDoom_DECORATE.cfg.
Game configurations, Line Identification action: added "Front side only" (128) flag to arg1.
Game configurations, Line Identification action: renamed arg1 flags to match corresponding UDMF flag names.
Updated udmf_zdoom.txt.
Fixed, Fit Textures action: vertical texture offset of a middle part of double-sided linedef with "Lower unpegged" flag was calculated incorrectly.
Fixed, Fit Textures action: texture offsets were calculated incorrectly when using the action on several groups of connected walls at once with "Fit across connected surfaces" enabled.
Fixed, Visual mode: middle parts of double-sided linedefs were not rendered when ScaleY was negative.
Updated ZDoom_DECORATE.cfg.
Visual mode: removed "Fit Texture's Width" and "Fit Texture's Height" actions.
Visual mode: "Auto-align texture offsets" actions were incorrectly aligning double-sided middle walls in some cases.
Visual mode: "Auto-align texture offsets" actions now align non-wrapped double-sided middle walls to vertical offset closest to their initial vertical offset.
Visual mode: middle parts of double-sided walls were ignored when Shift-selecting walls.
Nodebuilders/Game configurations: GL nodes definitions were missing from game configurations.
Nodebuilders/Game configurations: "~MAP" wildcard can now be a part of a lump name.
Nodebuilders: GL nodes were not properly handled by the editor.
Main Window: the window is now moved into the view when stored position is ouside of screen bounds.
Classic and Visual modes: changing thing pitch was ignored in some cases.
Visual mode: raising and lowering a thing with "+SPAWNCEILING" flag now works the same way as when raising/lowering a regular thing.
Visual mode: using "Raise/Lower Floor/Ceiling to adjacent sector" actions on a thing with "+SPAWNCEILING" flag now works the same way as when using them on a regular thing.
Rendering: even more fixes to MODELDEF and UDMF properties-related model rendering logic.
Internal, ResourceListEditor: rewritten resource validation check in a more OOP-ish way.
Configurations: fixed an infinite loop crash when a file was trying to include() itself.
UDMF thing flags: added Skill 6-8 to the flags list (because there are thing filters for these).
ZDoom_ACS.cfg: added definitions for SetTeleFog and SwapTeleFog.
ZDoom_DECORATE.cfg: added definitions for A_SetTeleFog and A_SwapTeleFog.
Updated ZDoom ACC.
Updated documentation.
Resource List Editor: not existing resources are now shown using different color.
Map Options, Open Map Options, Game Configurations windows: a warning is now shown when a map resource doesn't exist.
Some minor fixes to Resource List Editor's context menu.
Updated ZDoom_DECORATE.cfg.
Bit Flags form now changes width to show flags with long names without scrolling.
Bit Flags form: flag numbers are now shown as well as names.
Game configurations: updated Hexen and ZDoom linedef definitions. Now they (hopefully) fully match ZDoom ones.
Action Selector Control: fixed a crash when trying to increase action above maximum value using mouse wheel.
Sector/Linedef/Thing tag lists are now handled by corresponding TypeHandlers (and not by dirty hacks as before).
Linedef info panel: line peggedness labels were obscured by effect label in Doom/Hexen map formats.
Cosmetic changes in Sector Info Panel and Thing Browser Control.
ArgumentInfo: fixed a crash when enum specified in a game configuration doesn't exist.
Updated Hexen and ZDoom linedef configs.
Updated ZDoom_DECORATE.cfg
Texture browser form: added "Long texture names" check-box. It can be used to toggle between displaying long and short texture names.
Texture browser form: added "Show image size" check-box.
Texture browser form: image size is now shown differently.
Image Selector: added a button to toggle between long and short texture name.
Linedef info panel: long texture names are now displayed properly.
Sector info panel: long texture names are now displayed properly.
Fixed: "Save Screenshot" and "Save Edit Area Screenshot" actions were triggered multiple times when a child window was open.
Fixed: used textures should be always updated after using "Change map in current WAD" action.
Fixed, "Change map in current WAD": fixed a crash when trying to switch from a map with missing game configuration path.
Updated ZDoom_ACS.cfg.
Open Map in Current WAD: resources are now reloaded when current and target map's resources don't match.
Added some boilerplate to UniversalParser and PK3FileImage.
Internal: ImageSelectorControl now has "UsePreviews" property.
Internal: added ConfigurablePictureBox.
Updated ZDoom_DECORATE.cfg.
Textures Browser form: PK3/Directory TEXTURES images are now shown in a separate folder in the resources tree.
Fixed, Textures Browser form: fixed a logic error when trying to select initial flat when mix textures & flats was disabled in the current game configuration (this resulted in the blank textures list after opening the form).
Fixed, Textures Browser form: resources tree showed textures count even when browsing flats.
Fixed, Textures Browser form: PK3/Directory textures took precedence even when browsing flats (this means when there were a flat and a texture with the same name, a texture was displayed when browsing flats).
Fixed, Classic modes: actor's scale set in DECORATE was ignored when rendering models.
Fixed, MODELDEF parser: in some cases, several model definitions were skipped when trying to skip the current one.
Fixed, resource management: flat and sprite TEXTURES definitions were loaded only from TEXTURES files named "TEXTURES".
Fixed/added, PK3/folder resource management: patch locations for sprites defined in TEXTURES are now checked the same way as in ZDoom (previously only the "sprites" folder was checked).
Fixed/added, PK3/folder resource management: patch locations for textures defined in TEXTURES are now checked the same way as in ZDoom (previously only the "textures" folder was checked).
Fixed, PK3/folder resource management: flats defined in TEXTURES were not added to the global Flats image list.
Fixed, PK3/folder resource management: in some cases, the image search algorithm could find flats, textures, patches or sprites in incorrect folders (for example, it could find a flat in "flats_backup" folder).
Game Configurations: moved "thingflagscompare" from Game to Map format blocks. "Check stuck things" check now works properly in Doom/Boom game configurations.
Map Analysis: fixed a possible crash during "Check texture alignment" check.
Map Analysis: ResultStuckThingInLine now highlights both thing and line.
Map Analysis: ResultStuckThingInThing now highlights both things and allows to delete any of them.
Internal, Map Analysis: rewritten parts of "Check stuck things" class.
Internal, Map Analysis: changed the way processed stuff is stored in "Check texture alignment" class.
Internal: changed CurrentDomainOnUnhandledException, so ExceptionDialog with proper info shows up even if adding exception to the Event Log failed.
Internal: changed format, in which thingflagscompare info is stored.
Map Analysis form: error checks are now alphabetically sorted.
Map Analysis form: added "Toggle All" check box.
Internal: CheckboxArrayControl now has Sort() method.
More fixes in ZDoom_DECORATE.cfg
Linedef Edit Form, UDMF: missing activation flags warning is now displayed only for linedef actions with "requiresactivation" property set in a game configuration.
Game configurations: fixed a couple of property names, added more enums & default values.
Updated BCC compiler to rev. 20140818r2.
Game Configurations: changed default map name for Doom maps to "E1M1".
New Map Form: "E1M1" is now used as a default name for Doom maps.
Thing Browser Control: double-click event is now sent only if user clicked in the node's label area.
Interface: added info messages for several toolbar toggles.
Interface: made Brightness icon more readable when using dark windows themes.
BCC script compiler (https://github.com/wormt/bcc/) is now bundled with GZDB.
Main Form, "File" menu: only existing files are now added to the "recent files" list.
Preferences: added "Capitalize texture names" option (located in Preferences -> Appearance -> Additional options). When disabled, the casing of displayed texture names will match filenames for textures loaded form TEXTURES or pk3/pk7/folder resources.
Textures Browser: added support for displaying long texture names.
Errors list is now cleared when reloading resources.
Visual mode: added basic support for sector slopes (no UI for that feature yet).
Changed "Raise Floor by 8 mp" and "Lower Floor by 8 mp" default shortcuts to "Ctrl-Alt-ScrollUp/ScrollDown", because they used the same keys as "Increase Brightness" and "Decrease Brightness" actions.
Snippets: changed token syntax from $XX to [XX]
[LB] (Line Break) marker can now be used in snippets.
Game Configurations: added "enabledbydefault" parameter. When set to true, a game configuration will be available by default (e.g. when an user starts the editor for the first time).
GZDB will no longer throw an exception when trying to update default value in a TypeHandler, which doesn't implement default value handling.
Make Door action: door and track textures are now stored while the editor is running.
Edit Selection Mode: pasted geometry was not merged with the rest of the map if the selection was not modified before applying the mode.
Make Door action: made Make Door form a bit smaller.
Make Door action: sector highlight was not updated after performing the action when a single sector was selected.
When you try to change floor/ceiling texture offsets in Doom/Hexen map formats, a warning is displayed in status bar (instead of spamming you with message windows).
Mode actions toolbar is now auto-hidden when there are no buttons to display.
Game Configurations: added "fixedrotation" property to "Polyobject Anchor" (9300), "Polyobject Start Spot" (9301), "Polyobject Start Spot (crush)" (9302) and "Polyobject Start Spot (hurts to touch)" (9303) actors.
Color Picker plugin: moved plugin button to "Modes" toolbar group.
API: added ToolbarSection.Modes property, which can be used in MainForm.AddButton() to add a button to Modes group.
Removed a bunch of unused variables.
When no configuration is enabled, a message was supposed to be shown after startup. Now it actually shows up.
Several configurations were missing from the "Configurations" folder.
Configurations: all 64 game configuration are now available by default.
Game Configurations window: game configurations can now be disabled. This setting is mostly cosmetic. When a game configuration is disabled, it won't be shown in "game configuration" dropdowns in New\Open Map Options and Map Options windows. If a map's .dbs file specifies a disabled configuration, it will be picked as a map configuration anyway.
Linedefs mode: vertex insert preview logic used Highlight range instead of Stitch range (which is used when draw mode engages).
Visual mode: double-sided middle textures were not selected when using "Select" action with "with same texture" modifier.
Textures: some optimizations in patch blending code.
ZDoom ACS script configuration: added definitions for StrLeft, StrMid and StrRight functions.
Map Analysis mode: "Check overlapping lines" now finds duplicate linedefs (e.g. when 2 lines have the same start and end positions).
Map Analysis mode: added "Check overlapping vertices" check. This will check if a vertex is on top of a linedef or another vertex.
Some cosmetic changes in Tools and BaseVisualMode.
Updated zspecial.acs
Linedefs mode: event arrows were not redrawn after updating vertex insert indicator.
Configurations: some titles were too long to be displayed properly in the interface.
Numeric textbox: in addition to '++NN' and '--NN', you can use '*NN' and '/NN' to multiply or divide the values.
Configurations, ZDoom_linedefs.cfg: some linedef action arguments were missing a proper type.
Rewritten parts of hints system. Hints are now loaded from "Hints.cfg" file.
Reverted "Delete Item" action to the way it worked in DB2.
Added "Dissolve Item" action, which works the way "Delete Item" worked in previous revisions of GZDB.
Added "Auto Clear Sidedef Textures" action, "Edit" menu and toolbar button, which toggle automatic removal of sidedef textures when floor or ceiling height is changed or when geometry is drawn, copied or pasted.
Draw Settings panel: upper/lower texture overrides can now be used.
Draw Settings panel: added 2 sets of buttons, which allow to quickly set or clear textures in current selection.
Things are now rendered behind AND on top of the grid/linedefs/vertices when they are dragged.
Redesigned hints system. They are now shown in a side panel.
Edit area auto-focusing is now disabled when script editor is open.
Texture Browser form: no texture group was selected when opening the form in some cases.
Fixed several strange/misleading text messages.
Sectors mode: event lines were not rendered for things targeting highlighted sector.
Added "DropItem" and "CheckFlag" definitions to ACS and DECORATE script configurations.
Default sector ceiling height can now be set in Preferences.
Default sector floor height can now be set in Preferences.
Maximum number of recent files can now be changed in Preferences.
UDMF, Custom fields: a warning is now shown when a user tries to manually add a managed filed.
UDMF: "Translucent" linedef flag is now marked as obsolete.
"Snap Map Elements to Grid" mode now tries to fix invalid geometry after vertex snapping.
Vertices mode: in some cases not all vertices were removed when deleting vertices.
Removed "Load GZDoom light definitions" from preferences. If you want to use GZDoom's GLDEFS definitions, add "lights.pk3" as a resource.
Visual mode: fixed a crash when toggling GZDoom Geometry Effects (Tab)
Fixed sector bounding box calculation error.
Renamed "Edit -> Grid Setup..." to "Edit -> Grid and Backdrop Setup..."
Updated documentation
Increased maximum zoom level in Classic modes to 3000%.
Added "1 mp" option in grid size menu.
Added "400%" option in zoom menu.
Renamed "Toggle GZDoom rendering effects" action to "Toggle Geometry Effects".
Sync camera position: Visual Camera height is now changed only if camera is above or below current sector.
Classic modes: view was not redrawn after "Test map from current position" action.
"Test map from current position" action: incorrect player start was used when a map had several Player 1 Start things.
Script editor: pressing "F1" now opens keyword help instead of program manual.
Linedef edit form, Thing edit form: rewritten script support logic. It should now work in the same manner as the rest of controls.
Thing info panel: thing arguments now have proper labels.
Edit forms, UDMF: fields, which are handled by UI, are no longer shown in "Custom" tab.
Visual mode: fixed a crash when loading a model on a video card without Shader model 2.0 support.
Fixed incorrect argument number and changed most of labels in "Cameras and interpolation" section of zdoom_things.cfg.
Textures were not loaded properly from PK3/PK7 archives.
Visual mode: restored ability to remove textures using Delete action.
Visual mode: fixed several bugs in Cut/Copy/Paste things actions.
Visual mode: vavoom style 3d floors were not displayed properly.
Visual mode, 3d floors: added support for "RestrictLighting" (2) flag.
Visual mode, 3d floors: inner sides of 3d floors with "swimmable"/"render inside" flags used incorrect brightness value.
Texture scale controls now have "Link" button.
Thing, Sector (UDMF) and Linedef edit forms now work in realtime mode.
Some more fixes in Edit form realtime update stuff.
Removed some unused variables and functions.
