This DOES NOT fix the more complex issue discussed at the forums.
git-svn-id: https://svn.eduke32.com/eduke32@4592 1a8010ca-5511-0410-912e-c29ae57300e0
The 'clean' and 'veryclean' targets are usually run without environment options.
It is preferable if they clean out all object files that are possible with any.
git-svn-id: https://svn.eduke32.com/eduke32@4591 1a8010ca-5511-0410-912e-c29ae57300e0
The volume and level number for the music are stored in the last two bytes
of the board file name array. No version bump is required.
git-svn-id: https://svn.eduke32.com/eduke32@4589 1a8010ca-5511-0410-912e-c29ae57300e0
The additional space was there all the time, so it's not understandable why
another array was necessary.
CON: for 'music', error if volume number is outside [0 .. MAXVOLUMES+1], and
in LunaCON, additionally warn if it's MAXVOLUMES+1 (0 is preferred for that).
git-svn-id: https://svn.eduke32.com/eduke32@4588 1a8010ca-5511-0410-912e-c29ae57300e0
The OSD command is invoked like "music E5L3" (case insensitively).
git-svn-id: https://svn.eduke32.com/eduke32@4587 1a8010ca-5511-0410-912e-c29ae57300e0
In C-CON's qsubstr, error if <start> is not in [0 .. MAXQUOTELEN-1]
or <length> is negative.
git-svn-id: https://svn.eduke32.com/eduke32@4583 1a8010ca-5511-0410-912e-c29ae57300e0
The winding of a loop -- with clockdir() -- is determined by examining the
two line segments spanned between the points following a leftmost point of
the loop. If the loop contains a leftmost point that belongs to the "right"
side (as can happen with sliding door constructions), there's a chance that
an outer loop is misclassified.
git-svn-id: https://svn.eduke32.com/eduke32@4580 1a8010ca-5511-0410-912e-c29ae57300e0
And use these in jmact/mathutil.c's FindDistance2D()/FindDistance3D().
The main use is to allow passing dx/dy instead of sprite positions; the code
that actually uses this is not committed.
git-svn-id: https://svn.eduke32.com/eduke32@4579 1a8010ca-5511-0410-912e-c29ae57300e0
They classify former uses of int64_t into two classes:
- coord_t: those that represent coordinates and need 64-bit precision for
proper functioning with large values
- inthi_t: those that were added for e.g. casts merely to prevent undefined
behavior on overflow
DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4578 1a8010ca-5511-0410-912e-c29ae57300e0
Such as "vid_gamma". In that case, setbrightness() would have been
called without basepaltableptr having been initialized.
The fix is by moving the preparational setbasepaltable() call from
ExtPostStartupWindow() to ExtInit(), just before the OSD command
dispatching.
git-svn-id: https://svn.eduke32.com/eduke32@4573 1a8010ca-5511-0410-912e-c29ae57300e0
This could happen when building outside the "classic" grid limits and would
then lead to e.g. incorrect loop assignment on sector splitting. Bug reported
by MetHy.
git-svn-id: https://svn.eduke32.com/eduke32@4572 1a8010ca-5511-0410-912e-c29ae57300e0
Inspired by
http://forums.duke4.net/topic/7506-tror-question/page__view__findpost__p__199151
the corruption checker now checks for certain conditions of the loops of each
sector. Recall that CW loops are outer and CCW loops are inner.
- If a sector has no or more than one outer loop, count that as corruption
(level 4 and 3, respectively).
- (Disabled) For sectors with exactly one outer loop, check that all inner
ones are inside it. This is currently not compiled due to an asymmetry of
loopinside() for degenerate cases, similar to pre-r3898 inside().
git-svn-id: https://svn.eduke32.com/eduke32@4569 1a8010ca-5511-0410-912e-c29ae57300e0
There are no intended changes of functionality, it's readability tweaks only.
git-svn-id: https://svn.eduke32.com/eduke32@4568 1a8010ca-5511-0410-912e-c29ae57300e0
Note to MSVC users: You can get the revision number if you run `make rev o=obj` with MinGW before you build.
DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4565 1a8010ca-5511-0410-912e-c29ae57300e0
-sdlayer: Apple and GTK are not mutually exclusive.
-Makefile.common: Specify WITHOUT_GTK?=1 by default.
-Makefile: Limit linking with the QuickTime framework to OS X 10.6 and below.
One fix from me:
-osxbuild.sh: Fix building tools.
git-svn-id: https://svn.eduke32.com/eduke32@4548 1a8010ca-5511-0410-912e-c29ae57300e0
-Respect CC and CXX if already set in the environment.
-Respect CFLAGS, CXXFLAGS, and LDFLAGS if set or specified.
-Give packagers the setting "PACKAGE_REPOSITORY=1" to prevent us from adding our own optimization parameters.
git-svn-id: https://svn.eduke32.com/eduke32@4547 1a8010ca-5511-0410-912e-c29ae57300e0
1 compiler error.
2 compiler warnings.
1 runtime warning.
Note that at this time, CPLUSPLUS=1 LUNATIC=1 fails to build due to C++ function mangling, and Win64 Lunatic crashes.
DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4540 1a8010ca-5511-0410-912e-c29ae57300e0
1. The application must specify its proper name and technical name. Instead of eduke32_or_mapster32.crash.log, we now have eduke32.crash.log and mapster32.crash.log.
2. The exception handler will display a message box informing the user of a crash and requesting they send in the crash log. The box has three options: "Quit", the DLL's current behavior, "Continue", which passes the exception to the next handler, and "Ignore", which resumes execution immediately. These should allow the user to skip bogus exceptions picked up by ebacktrace, such as one I get with my laptop that causes EDuke32 no issues.
git-svn-id: https://svn.eduke32.com/eduke32@4538 1a8010ca-5511-0410-912e-c29ae57300e0
Note that the user map function still overwrites everything in slot E1L8 for the time being, which is a deeper problem I need to address.
git-svn-id: https://svn.eduke32.com/eduke32@4525 1a8010ca-5511-0410-912e-c29ae57300e0
LOGO_NOE1ENDSCREEN
LOGO_NOE2ENDSCREEN
LOGO_NOE3RADLOGO
LOGO_NODUKETEAMTEXT
LOGO_NODUKETEAMPIC
As part of this, the LOGO_NOE*BONUSSCENE flags no longer remove the entire end sequence in one go. They now only remove the primary cinematic. If you want their previous effect, you'll have to add these additional bits.
git-svn-id: https://svn.eduke32.com/eduke32@4514 1a8010ca-5511-0410-912e-c29ae57300e0
That is, the reverse of what is returned with the first outarg. Use that in
lunatic/util/foreachmap.lua. DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4499 1a8010ca-5511-0410-912e-c29ae57300e0
When that mode is enabled (see below for caveats), wall textures that have a
non-power-of-two height (call it 'h') will be modified to look like in classic:
Let 'H' be the next power of two greater than 'h'. The texture will be uploaded
with height 'H', made up from 'h' hlines of the original texture, followed by
'H'-'h' first hlines of the same.
No panning "corrections" will take place. The mode is disabled by default.
Caveats/notes:
* the mode requires that r_hightile is disabled
* it is not implemented in Polymer
* in the Lunatic build, it is ineffective when a VX map is loaded, as those
display walls with NPOT height textures correctly
git-svn-id: https://svn.eduke32.com/eduke32@4498 1a8010ca-5511-0410-912e-c29ae57300e0
Mouse/touch/pointer support is yet to come. #SOON.
Exposure to scripting is a LONG way off. Months. The spec and data structure needs time for comment and revision. The eventual scripting access will be Lua-only.
git-svn-id: https://svn.eduke32.com/eduke32@4496 1a8010ca-5511-0410-912e-c29ae57300e0
Note that x-flipping is determined by the cstat of the upper part of the wall
(that is, the wall facing the player, not the nextwall, from which the picnum
for the bottom part is taken.)
git-svn-id: https://svn.eduke32.com/eduke32@4493 1a8010ca-5511-0410-912e-c29ae57300e0
... and cull code that is dead with the X*alloc() versions since they never
return NULL on requesting memory.
Use something like
git grep '[^Xx]\(m\|c\|re\)alloc *('
and
git grep '[^Xx]strdup *('
to see places where I left the B*alloc() calls intact.
BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4491 1a8010ca-5511-0410-912e-c29ae57300e0
These wrap the x*alloc or xstrdup functions in compat.c. The handler gets passed
__FILE__, __LINE__ and __func__ (if available) in debugging builds.
Terminating the application process immediately in case of allocation failure
will let us prune many error handling paths and simplify a good portion of code.
git-svn-id: https://svn.eduke32.com/eduke32@4490 1a8010ca-5511-0410-912e-c29ae57300e0
- in mdloadskin() and gloadtile_hi(), use new function check_nonpow2()
(bit-twiddling) instead of loop
- Replace a couple of missed literals with CACHEAD_* enum labels
git-svn-id: https://svn.eduke32.com/eduke32@4488 1a8010ca-5511-0410-912e-c29ae57300e0
Note: in polymer.c, this was buggy (but harmless) because .r is a char:
if ((uint32_t)hictinting[MAXPALOOKUPS-1].r & 0xFFFFFF00) != 0xFFFFFF00)
git-svn-id: https://svn.eduke32.com/eduke32@4487 1a8010ca-5511-0410-912e-c29ae57300e0
Specifically, the handling of one-way walls ([1] in Mapster32) was slightly
different.
git-svn-id: https://svn.eduke32.com/eduke32@4484 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the subway sound not played once on map initialization.
git-svn-id: https://svn.eduke32.com/eduke32@4481 1a8010ca-5511-0410-912e-c29ae57300e0
This only affects zombie actors in a sector with a parallaxed ceiling. If they
have SFLAG_NOSHADE clear, their shade is taken from the ceiling upon
changing the statnum. Previously, A_CheckSpriteFlags() received a value that
could only be 0 or 1 for the sprite index (typo).
git-svn-id: https://svn.eduke32.com/eduke32@4477 1a8010ca-5511-0410-912e-c29ae57300e0
Mostly, these are rendering-related variables. We keep *writing* them to
mapster32.cfg so that older Mapster32 versions can be used side-by-side
for now.
git-svn-id: https://svn.eduke32.com/eduke32@4462 1a8010ca-5511-0410-912e-c29ae57300e0
This mode does not take a sector's visibility values into account for uniform
darkening of a texture. It is more faithful to classic with respect to
fog/visibility *distances*, but may be less so as far as the "tint" of the
texture due to visibility attenuation is concerned.
git-svn-id: https://svn.eduke32.com/eduke32@4459 1a8010ca-5511-0410-912e-c29ae57300e0
That is, for every for palette (now, even ones created by the user) the last
shade is the (or rather, a color close to the) full fog color by construction.
In loadpalette(), reject a PALETTE.DAT with only one shade level.
git-svn-id: https://svn.eduke32.com/eduke32@4458 1a8010ca-5511-0410-912e-c29ae57300e0
Concretely, for all 1 <= i <= 255, make graypalookup[31][i] := graypalookup[31][0].
Also document 'fogpal' in the Lunatic doc.
git-svn-id: https://svn.eduke32.com/eduke32@4456 1a8010ca-5511-0410-912e-c29ae57300e0
Also,
- add a static assertion to engine.c
- gameexec.c: compile out an unused function in Lunatic builds
git-svn-id: https://svn.eduke32.com/eduke32@4451 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the game not process as many ticks as have elapsed during the saving
afterwards.
git-svn-id: https://svn.eduke32.com/eduke32@4450 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, the check was for the hard-coded sound number. This made it
impossible to change difficulty selection sounds via EVENT_SOUND.
git-svn-id: https://svn.eduke32.com/eduke32@4449 1a8010ca-5511-0410-912e-c29ae57300e0
For convenience, orientation gets bit 1 (translucency) set automatically.
Again, test/screentext.con is updated to show off this functionality (the
code there assumes that additive blending tables are loaded at blend
numbers 101 -- 132).
BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4428 1a8010ca-5511-0410-912e-c29ae57300e0
The extended PALETTE.DAT format can now carry a trailing byte, called
'lognumalphatables'. If it is present, the engine assumes that alpha blending
tables are loaded at blend indices 1 to 1<<lognumalphatables and handles
rotatesprite's alpha and spriteext[].alpha accordingly.
The ability to save this new byte is added to engine.lua:savePaletteDat()
and the corresponding convenience functions in shadexfog.lua.
Examples test/screentext.con and test/sprite_access.con are updated for
demonstration purposes.
git-svn-id: https://svn.eduke32.com/eduke32@4426 1a8010ca-5511-0410-912e-c29ae57300e0
Hook up those from test/shadexfog.lua and some debugging ones from engine.lua.
git-svn-id: https://svn.eduke32.com/eduke32@4419 1a8010ca-5511-0410-912e-c29ae57300e0
The overall situation is thus as follows:
- in C and from Lua, that member is called 'fogpal'
- In CON (both C-CON and LunaCON), it's 'fogpal' with 'alignto' being an alias;
'filler' wasn't available before, either.
- In m32script, it's 'fogpal' or 'alignto' ('filler' is not available any more)
git-svn-id: https://svn.eduke32.com/eduke32@4416 1a8010ca-5511-0410-912e-c29ae57300e0
That is, if that member has a nonzero value, that one is taken for the color of
the GL fog instead of (most of the time) sector[].floorpal. "Sky sectors", that
is, skyboxes or simply parallaxed floors/ceilings are *not* handled.
git-svn-id: https://svn.eduke32.com/eduke32@4415 1a8010ca-5511-0410-912e-c29ae57300e0
The state quries the user for four values: ref. picnum, target picnum, max.
ldist and a lotag. Then, for all sprites i (of ref. picnum), for all sprites j
(of target picnum), if ldist(i,j)<=maxldist, sprite j's lotag is changed to the
provided one.
Also add lunatic/test/maputil.lua, containing a similar function but allowing
to customize the selection predicates of the ref. and target sprites, as well
as the action to carry out.
git-svn-id: https://svn.eduke32.com/eduke32@4414 1a8010ca-5511-0410-912e-c29ae57300e0
Also, extend the documentation for r_usenewshading a little. Specifically,
note when the different modes were introduced. BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4410 1a8010ca-5511-0410-912e-c29ae57300e0
It was plainly noticeable in the editor's tile info display, for
example.
git-svn-id: https://svn.eduke32.com/eduke32@4409 1a8010ca-5511-0410-912e-c29ae57300e0
This is done by factoring out some polymer.c:polymer_getbuildmaterial() code
into polymer_eligible_for_artmapping() and using that. The one in polymer.c
can still determine to not use ART mapping on some ("rare"?) occasions, so
it's not 100% in sync.
git-svn-id: https://svn.eduke32.com/eduke32@4407 1a8010ca-5511-0410-912e-c29ae57300e0
- factor out eligible_for_tileshades()
- remove some rendmode 1 code
- move some auto vars further down
git-svn-id: https://svn.eduke32.com/eduke32@4406 1a8010ca-5511-0410-912e-c29ae57300e0
This replaces all remaining magic numbers with enumerations thereof.
It also tweaks the following, even though most will be irrelevant post-rewrite:
-Remove unused menus
-Properly center the nuke icon in Duke and the star icon in NAM
-Fix the multiplayer macro editing menu:
--Position the currently editing quote its proper spot instead of beneath the first row
--Don't highlight the first quote while editing a different one
--Select the quote just edited when finished editing instead of the first one
-Fix the cursor of a centered text input field (such as the adult mode password)
-Implement proper shade glowing of selected menu entries in Joystick Settings, Joystick Axes, and Joystick Dead Zones
-Shift the the Joystick Axes menu down to avoid overlapping the title bar
-Change the title of mouse digital axis assignment "Digital Axes Setup" instead of "Advanced Mouse"
-Fix the behavior of the Next button in Joystick Dead Zones to not act like a scrollbar
git-svn-id: https://svn.eduke32.com/eduke32@4399 1a8010ca-5511-0410-912e-c29ae57300e0
With this mode, the near distance of the linear fog is always 0, unlike being
negative with r_usenewshading 2.
git-svn-id: https://svn.eduke32.com/eduke32@4393 1a8010ca-5511-0410-912e-c29ae57300e0
Fix a case in G_MovePlayers(), where the player sprite's shade is approached
toward the ceiling/floor's shade. Before, it could stop at one above or below!
git-svn-id: https://svn.eduke32.com/eduke32@4392 1a8010ca-5511-0410-912e-c29ae57300e0
Also add two static assertions checking that the obituary quotes don't go
out of the MAXQUOTES bound. BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4391 1a8010ca-5511-0410-912e-c29ae57300e0
In C and Lunatic, split 'jumptoplayer' of enum amoveflags_t / action.MOVFLAGS
into 'jumptoplayer_bits' and 'jumptoplayer_only' (see updated Lunatic doc).
git-svn-id: https://svn.eduke32.com/eduke32@4378 1a8010ca-5511-0410-912e-c29ae57300e0
That is, always bitwise-OR the per-tile actor flags with the existing ones.
git-svn-id: https://svn.eduke32.com/eduke32@4374 1a8010ca-5511-0410-912e-c29ae57300e0
Reserved bits are those that have no predefined SFLAG_* label in CON.
git-svn-id: https://svn.eduke32.com/eduke32@4372 1a8010ca-5511-0410-912e-c29ae57300e0
This flag is set from C for some enemies that should not be pushed back when
damaged, such as TANK. Both the tile flag and the per-sprite flag are used
(i.e. the ultimate flag value is the XOR of the two).
Add currently non-functional example to test.lua that attempts to set this bit
for NEWBEAST.
git-svn-id: https://svn.eduke32.com/eduke32@4371 1a8010ca-5511-0410-912e-c29ae57300e0
Unlike in C-CON, it only tries an exact match with the given and uppercased
label, not "full" case-insensitive search.
git-svn-id: https://svn.eduke32.com/eduke32@4370 1a8010ca-5511-0410-912e-c29ae57300e0
Make Mapster32 save as map-text if there is a wall with non-zero 'blend'.
git-svn-id: https://svn.eduke32.com/eduke32@4368 1a8010ca-5511-0410-912e-c29ae57300e0
For a 1680x1050 scene standing directly in front of a mirror, this increases
FPS from ~90 to ~95 for me.
git-svn-id: https://svn.eduke32.com/eduke32@4363 1a8010ca-5511-0410-912e-c29ae57300e0
Given highlighted sectors, these take the arithmetic mean of their ceiling's
or floor's (respectively) z, removing the slope bit from all, and setting the
new z to the mean one, rounded down to 1024 Build z units (one PGUP/PGDN).
BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4357 1a8010ca-5511-0410-912e-c29ae57300e0
We shouldn't be using its actor[].t_data[8] because that one is used by the
sprite rotation-fixing system (which fixes STAT_FX sprites to the positions
relative to the pivot, too).
Test case source/lunatic/test/delmusicsfx.lua still passes with this
modification.
git-svn-id: https://svn.eduke32.com/eduke32@4352 1a8010ca-5511-0410-912e-c29ae57300e0
It now accepts a number of tables to create as 3rd arg. The function that
create_trans() takes as the 2nd argument is now being passed
(r,g,b, R,G,B, tablei, numtables).
Rewrite create_additive_trans() in terms of it.
Rename create_128_trans() -> create_alpha_trans().
git-svn-id: https://svn.eduke32.com/eduke32@4347 1a8010ca-5511-0410-912e-c29ae57300e0
One potential use is to add r_togglecomposition "0" if you don't like Aero turning on and off every time you switch between 2D mode and 32-bit 3D mode.
git-svn-id: https://svn.eduke32.com/eduke32@4344 1a8010ca-5511-0410-912e-c29ae57300e0
engine.setupDebugBasePal() set up the water base palette such each of the first
15 "ramps" of 16 consecutive colors has a single, "representative" color. For
example, color indices 0-15 and black, 16-31 are dark gray.
In shadexfog.lua, list remappings from LOOKUP.DAT that are expressible as
remappings of 16-tuples.
git-svn-id: https://svn.eduke32.com/eduke32@4337 1a8010ca-5511-0410-912e-c29ae57300e0
- Mapster32: before loading LOOKUP.DAT, set palookup[0][239]=239 to
make an identity map of the base shade table's shade 0
- Rewrite color index remapping case of makepalookup() for clarity
BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4336 1a8010ca-5511-0410-912e-c29ae57300e0
As opposed to the previous way, where the first fog pals was <numlookups>+1,
where <numlookups> is the first byte value of LOOKUP.DAT. This allows to
pack e.g. lookups [1 .. 25] and [30 .. <lastpal>] into LOOKUP.DAT and have fog
pals be generated at pals [26 .. 29] (i.e. the additional lookups don't
shift the fog pals, making user maps depending on these numbers not look as
intended.)
git-svn-id: https://svn.eduke32.com/eduke32@4335 1a8010ca-5511-0410-912e-c29ae57300e0
Also, error if didn't read enough data and account for TITLE and REALMS
swap between basepal number and on-disk order (sigh).
git-svn-id: https://svn.eduke32.com/eduke32@4334 1a8010ca-5511-0410-912e-c29ae57300e0
It must be a power of two in [2 .. 128]. Rewrite test/sprite_access.con's
liztroop example to account for that.
Also, add function shadexfog.create_trans() which aceepts a function
(r,g,b,R,G,B) -> blended (r,g,b) and rewrite shadexfog.create_additive_trans()
in terms of it.
git-svn-id: https://svn.eduke32.com/eduke32@4333 1a8010ca-5511-0410-912e-c29ae57300e0
- Added preprocessor value NETVERSION, to be incremented in the source whenever changes are made to the network protocol.
- Implemented proper server-side version verification of all clients upon connection.
- Implemented connection refusal when we reach MAXPLAYERS. (Should be expanded to implement server player caps.)
- Protected against OOB array accesses if an invalid player id is received.
- Renamed all "Recieve" to "Receive".
git-svn-id: https://svn.eduke32.com/eduke32@4322 1a8010ca-5511-0410-912e-c29ae57300e0
See lunatic/test/sprite_access.con for a LIZTROOP that periodically smoothly
alpha-fades in and out. (Assuming that the 128 alpha blending tables from
shadexfog.create_128_trans(1) are installed.)
BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4313 1a8010ca-5511-0410-912e-c29ae57300e0
Lunatic: also, add an additional argument 'moreblends' to
engine.savePaletteDat() and document that function.
See test/shadexfog.lua for a "user-friendly" wrapper shadexfog.save() which
prints success or errors.
git-svn-id: https://svn.eduke32.com/eduke32@4312 1a8010ca-5511-0410-912e-c29ae57300e0
The function now writes out a full PALETTE.DAT: base balette, shade table and
translucency table.
git-svn-id: https://svn.eduke32.com/eduke32@4311 1a8010ca-5511-0410-912e-c29ae57300e0
On the C side, slightly rewrite (now) getclosestcol_lim() for clarity.
git-svn-id: https://svn.eduke32.com/eduke32@4308 1a8010ca-5511-0410-912e-c29ae57300e0
Also, fix a missed .filler -> g_ambiencePlaying[] rewrite in the editor.
In C-CON, 'detail' is kept as alias to C-side (former) .filler / now .blend,
but that name is *deprecated*.
git-svn-id: https://svn.eduke32.com/eduke32@4305 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes updating the viewscreen in Polymer's ART mapping mode.
git-svn-id: https://svn.eduke32.com/eduke32@4304 1a8010ca-5511-0410-912e-c29ae57300e0
Currently, sprite[].filler (to be renamed) selects a blending table. If none
is installed with that index, the blending table at index 0 is taken (which is
read from PALETTE.DAT on engine startup). Thus, for now, the non-Lunatic build
will never use a custom blending table because there's no way to register one!
But the functionality is there.
git-svn-id: https://svn.eduke32.com/eduke32@4301 1a8010ca-5511-0410-912e-c29ae57300e0
- use SPRITES_OF* iterator macros
- new function: E_SpriteIsValid(); add some safety checks
(e.g. hitag used as sprite index)
- the rest is mostly "the usual code transformations"
git-svn-id: https://svn.eduke32.com/eduke32@4281 1a8010ca-5511-0410-912e-c29ae57300e0
