Development improvements
An improvement to Objectplace I've wanted to make for a loooong time.
* Object number up/down is now assigned to ringslinger weapon next/prev. SO much nicer to use, especially since most people have that stuff bound to the scroll wheel.
Also, some changes to the devmode overlay:
* Plays nicely with showfps on - see http://imgur.com/a/zSzvm for the various cases (showfps on, devmode 65535, and both).
* Add PF_THOKKED to the flags in devmode DBG_DETAILED (as "TH").
* "Flags:" replaced with "PF:", "Heap used" replaced with "Heap". The latter is a debatable change, but the former isn't - otherwise the line is way too long compared to the rest of the stuff.
See merge request !45
Hardcoded music name switches
Like I said earlier, it's better if all the hardcoded music switches in 2.2 start with an underscore so that it's harder to accidentally overwrite them.
Should be accepted when music.dta is updated.
See merge request !17
Same no non-music lump requirement as music.dta, and is ignored with no error if music_new.dta doesn't exist
(should hopefully make playing around with music easier)
Also, only one shield ability is selectively blocked by being Super now, and that's because Invincibility does it too and therefore I assume that's a match balance thing instead of a keyboard clash.
v.drawScaled negative scales fix
Lua now errors if you try to use negative scales with v.drawScaled, rather than crashing as it does in 2.1.16 currently. Not much else to say here.
See merge request !126
* Bubblewrap shield bounce now no longer allows thokking post-bounce, but still allows bouncing
* plus a bunch of tiny changes to clean up code around the place.
Fixing FF_REVERSEPLATFORM clipping fixes
Forgot the case where == 0.
Tested by @wolfy852 in Top Down, where the bugs this caused were first discovered.
See merge request !121
Even more slope-related fixes
What it says on the tin pretty much:
Currently included fixes:
* Pusher specials applied to FOFs did not properly account for slopes applied to the bottom plane; this probably was just a minor slipup that appeared on adding the support in the first place, I take it? (some waterfall in the last section of SUGOI's Fudge Canyon is the only place I can think of offhand where this bug is noticable)
See merge request !114
* Some shield sounds swapped (can be reverted later).
* Partial implementation of S3K shield abilities.
* The ability to elemental-groundpound onto gold monitors without going straight through them.
* Force shield ability removed because nobody could agree on it, we'll keep it blank until another idea can get through the disagreement juggernaut.
* shields give you 1000 points
* redundant shields don't make you puase
* checkpoints give you 2000 points
* falling down a deathpit is just falling, not bouncing
Treating " as whitespace in TEXTURES (and animdefs too i guess)
SLADE adds this character in its TEXTURES editor and makes SRB2 cry unless the lump is manually edited; this just treats it as whitespace so we don't have to think too hard about it.
Also, two I_Errors now refer to the correct lump name.
See merge request !122
Proper barrel sky distortion
Skies now use proper barrel distortion in both axes, rather than just the x-axis (i.e. just horizontally) as in all previous SRB2 versions. Credit goes to Nev3r for the original change and idea.
Was going to make an option for a non-barrel distorted sky, assuming barrel distortion is the default, but I just can't quite get it to work in a way that is pleasing to the eyes. So I've not bothered with it here for now, unless someone objects to barrel distorted skies for any reason?
See merge request !35
FOF wall slope skewing
FOF walls now can optionally skew with respect to slopes (software mode only currently):
* Upper Unpegged on the CONTROL linedef enables wall skewing
* Lower Unpegged on the IN-LEVEL linedefs ^1 determine which slope to skew with respect to (off = top slope, on = bottom slope)
* If Transfer Line is used however, Lower Unpegged on the control sector's linedefs does the above's job instead
^1 (this is because they already control pegging of individual FOF walls as it is, so this is for convenience and my sanity that they also deal with skewing)
See merge request !39
Fixes to horizontal spring collision
Fixed various issues arising from collision with exclusively horizontal springs. Thamks to @Inuyasha for the heads up! Of note:
* If you hold down your jump button whilst jumping into it, you no longer immediately use your ability.
* Characters with (CA_DOUBLEJUMP && CA2_MULTIABILITY) or CA_FLOAT or CA_HOVER no longer lose track of their jump count.
Also:
* Upped the strength of info.c's red and yellow horizontal springs.
See merge request !41
Horizon lines
Horizon lines for software mode! Place a Linedef type 41 somewhere on a one-sided linedef and it'll do fancy rendering hacks to draw the adjacent floor/ceiling to the "horizon". One small thing to sort out when I remember to do so, but this is good enough for merge already.
See merge request !44
FF_ANIMATE additions: globally synced animations
FF_GLOBALANIM = makes the animation synced to the level's timer, so all objects will display the same frame at the same time
I mean, doesn't that look so much prettier?
There's also some changes to FF_MIDDLESTARTCHANCE (FF_ANIMATE behavior was split due to not acting consistent between that and SPR2 behavior).
See merge request !46
* Object number up/down is now assigned to ringslinger weapon next/prev. SO much nicer to use, especially since most people have that stuff bound to the scroll wheel.
* introducing the new friend, SH_FORCEHP (which is used as a bitmask to get the extra hitpoints of a force-shield user)
* P_DamageMobj now considers the unimplemented shield constants as well as the implemented ones.
* When not pressing any direction, you now go backwards by default - to emphasise that this is primarily for defensive, not offensive, purposes.
* The camera can now handle the player going backwards without them going completely off-screen.
* Fixed some overzealous checks.
* The spinfire ring is now capable of damaging enemies. (god, what a terrible hack this is)
* When ground pounding, you now bounce off the floor a little bit to make the ability less spammable.
* The Dodge Dash
* Allows you to dash - no control, no falling, no key response - for 2 + (number of extra shield hitpoints) tics.
* If you're holding movement keys down, you dash in the direction you're holding - otherwise, you dash directly forward.
* You're spinning (spindash spin, not jump spin) until your dash is over, then your momentum is cut down significantly and you end up in falling frames.
* It may not necessarily be super useful for Sonic, but it helps the other characters.
* http://gfycat.com/BogusFailingFritillarybutterfly
* http://gfycat.com/PoliticalIdealisticBallpython (outdated speed, shows any direction)
Animated sky support
What it says on the tin: skies can be animated textures now. Just set them up as normal animated textures (keeping in mind the starting texture still has to comply with the SKYn/SKYnn/SKYnnn naming format) and hey presto, your sky animates.
See merge request !34
* GFZ3 Eggmobile's laser won't change its angle when you move left and right anymore.
* Changed because its ability to move quickly was extremely punishing for new players (see ProJared's youtube video on the matter).
* http://gfycat.com/PassionateUnknownAgama (the twitching on the third laser has been fixed since this was recorded)
* GFZ3 Eggmobile will, when too far away from the ground and moving upwards, slow itself down vertically.
* This was punishing and annoying for both old and new players alike.
* http://gfycat.com/ShabbyAncientEarthworm (old values - the typical settling height is slightly lower now)
* If you hold down your jump button whilst jumping into it, you no longer immediately use your ability.
* Characters with CA_DOUBLEJUMP and CA2_MULTIABILITY no longer lose track of their jump count.
(the problem was that MT_OVERLAY's default radius and height were never getting changed from 1*FRACUNIT, and that meant that when you spindashed, the game considered it completely below the surface of the flat you were standing on. Since you're not usually clipped on flats that don't belong to FOFs, we didn't notice this issue sooner.)
* Camerascale, shieldscale, height and spinheight are now player attributes which are set to the skin attribute on skin change, not read directly from the skin.
* P_GetPlayerHeight and P_GetPlayerSpinHeight are now macros instead of functions.
* Extra protection against switching to a locked skin.
* flips the sprite ala MFE_VERTICALFLIP except you don't need to flip the direction of gravity for the object just to draw upside down
* stacks properly with reverse gravity
HOWEVER, since these changes to PIT_CheckThing do raise questions about whether there may be unintended side effects here. As a result, I may remake this for internal only if necessary.
* Sets the sortscale of the mobj to that of its tracer.
* Basically, Smiles' tails won't clip through shields thanks to this.
* http://gfycat.com/GraveGlassEwe
* Also has support for chains of MF2_LINKDRAW!
More slope fixes (aka sorry guys I made another quick SUGOI fix)
Another slopes fix branch!
This branch currently includes a fix for:
* Knuckles gliding into a slope while in 2D mode causes him to try to "climb" on air above them, if the original non-sloped height is higher. Unfortunately he still tries to grab onto places that he can't really climb on, but at least now it's on the slope itself and not in mid-air lol. This issue is encountered in SUGOI's Retro Hill Zone, if you want to check for yourselves.
* Bustable FOF-busting code for both players AND pushables not accounting for slopes
* (Unrelated to slopes): Fix FF_SHATTERBOTTOM FOFs acting like THZ goop when stood on; I added this fix as a bonus because I encountered it in a test map of mine for the bustables fix
(Other fixes may or may not appear here in the near future, I haven't decided yet. Don't wait on me to get in any further fixes before merging, that said)
See merge request !110
Last-minute NiGHTS exiting bugfix
One single-line fix concerning the end of NiGHTS maps. Extremely small, literally zero side effects here, the only reason I'm not committing directly to master (aside from ettiquette) is that I don't have the ability to do so.
* The NiGHTS drone had a single tic of visibility when you hit the goal, which is evident stepping frame by frame through http://gfycat.com/ComplicatedComposedAoudad (the contents of which may or may not make it into 2.2). This is no longer the case.
See merge request !100
Also, the particles made via spindashing in shallow water are now located behind the player. This does move the running particles too, but that's okay.
* Fixed bug where being pushed off a platform whilst charging a spindash would leave you in your charging frames instead of your rolling ones when you hit the ground (http://gfycat.com/MassiveThreadbareItalianbrownbear for how it works now, http://gfycat.com/MarvelousEnlightenedAuk is how it used to work)
* Fixed bug where spindashing on top of a bubble spawnpoint led to you being able to move around in spindash frames (no gif since obvious desired behaviour is obvious)
* Spindash animation speeds up the faster you'll shoot off.
* The spin charging mechanism is now scale-independent, and only multiplies by scale when shooting off - less FixedMul calls, and potentially deals with weird quirks of changing scale whilst spindashing that nobody's discovered because there's no place to find that in the main game!
Also:
* Climbing animation defaults to rolling instead of walking, because what.
Skewing direction is decided per in-level wall by the Lower Unpegged flag on in-level linedefs themselves, since they already decide the stuff for FOF wall pegging as it is. That is unless Transfer Line is involved which moves everything to the control sector linedefs instead...
Cutscene switch fix
Yet another fix for SUGOI, lol: apparently going from a final level's post-cutscene straight to a custom credits cutscene gets the latter stuck forever in the first scene (because the game accidentally stops the cutscene responder from realising the custom credits cutscene is running). This branch of course makes a fix for that.
See merge request !108
Wall collision fixes
Fixes included in this branch:
* A fix for a specific crash encountered in a SUGOI map (sound familiar?) caused by bouncing off a wall adjacent to a slope
* A fix for solid midtextures not accounting for Effect 3/Peg Midtexture properly (https://mb.srb2.org/showthread.php?t=41462)
* A fix for solid midtextures not accounting for texture y offsets properly for non-Lower Unpegged/Peg Midtextured midtextures
* A fix for solid midtextures not accounting for "infinite" repeats (Repeat Midtexture + no repeat count set)
* ~~A fix for Effect 4 on Polyobject First Line making that particular linedef's midtexture solid in addition to making planes visible - this is not wanted if you want a polyobject with both visible planes and full intangibility.~~ Apparently they never did this anyway, don't mind me \o/
See merge request !104
Fix non-player objects having busted step-up/down on slopes
Why the fuck did I make this a player conditional in the first place holy shit
See merge request !103
RA menu can be opened if the game is modified, but Start can't be selected. (Obvious reason: so scripts to display info can be used easier)
Fixed the stupid background for messages in the Record Attack menu, it was bugging me
Also, I added more sortscale handling in the places where I forgot it.
I probably need some help with the maths here to get this to work nicely. http://gfycat.com/LimpAgedDowitcher
http://i.imgur.com/UyOKX5u.png <-- this common glitch with crawlas given MF_PAPER (THEY'RE NOT GOOD AT TURNING NEAR EDGES) used to show the behind-crawlas in front of the front-crawlas.
Unfortunately, I've just discovered this issue (which happens with the old version of the sorting code too): http://i.imgur.com/QNjbATB.png but to be fair these crawlas have gotten stuck inside the edges of this platform, so I'm not sure I can do anything about this without cutting off Sonic's feet when he stands on the ground? shrug
* MF_AMBUSH is now MF2_AMBUSH, because it's something you turn on in a map editor, not with a SOC definition.
* Where MF_AMBUSH was is now MF_PAPER.
* MF_PAPER accesses all the stuff I did previously in this branch...
* ...as well as turn on paper-thin collision detection between mobjs, which I've gotten working but isn't perfect but it's still good enough for non-solid objects!!
* recognising that the offsets weren't going to be accurate if you just SWAPPED yscale and yscale2 over 180 degrees
* taking scale into account consistently
also, some optimisations
also, i've sussed out WHAT'S going wrong here - the topleft pixel of the sprite will always be rendered at the height on the screen it would be rendered otherwise, which is causing the waving. now to figure out what to change to get that to move appropriately...
some complicated mathemagic leads to something which... seems CLOSE, but not perfectly accurate, so i think i need to tweak it more
http://gfycat.com/JovialSpitefulAmericancrayfish for current behaviour
I DID make some steps towards re-implementing PIT_CheckThing for solids only in order to replace the hack long-term and hopefully use less CPU, but is currently disabled via #if 0 since I'm not comfortable changing the function signature of P_CheckPosition right now.
If there's any reason to bring the old system back we could make it togglable by one of the linedef flags I suppose. Not that many people would actually use it though, most likely
remove all the places where i've set vis->scalestep to anything other than 0 to see something that LOOKS okay, but doesn't fulfil exactly what i want (that being a sprite that looks exactly like a midtexture)
* Effect 3 (Peg Midtexture) is now accounted for properly, flipping the collision box position to match the actual rendered position of the midtexture
* Fixed incorrect application of y-offsets for non-lower unpegged midtextures collision boxes; +ve always goes up, -ve always goes down!
* Effect 4 now doesn't make midtextures solid for polyobjects at all - this "conflicted" with First Line having both Effect 4 (visible planes) and Effect 3 (intangible) simultaneously, where we kind of expect the first line's wall to not be made solid. This may be less of a problem in future SRB2 versions, but for now solid midtextures for polyobjects are disabled.
. tmthing can be NULL if called from PTR_SlideTraverse, so we should use slidemo instead
This fixes a crash that occurs in yet ANOTHER SUGOI map, involving bouncy walls next to sloped floors/ceilings
To understand: look at AjustSegs(void) in hw_bsp.c. It reallocates the vetex_t pointers for lines as POLYVERTEX_T pointers, and of COURSE things are gonna get wacky when you're casting pointers.
I dunno how resilient the FLOAT_TO_FIXED solution is or whether it'll be netgame compatible (yayyy float precision loss) but it's not like our builds are netgame compatible with themselves
* The NiGHTS drone had a single tic of visibility when you hit the goal, which is evident stepping frame by frame through http://gfycat.com/ComplicatedComposedAoudad (the contents of which may or may not make it into 2.2).
* When completing a NiGHTS stage with a non-zero link, the link could flash up in the final few tics before the fade to black. This just checks for player->exiting to make sure it shouldn't be shown.
* That hacky anti-NiGHTS-deaxisment code I commented out because I thought it was visual only? Reimplemented in a way that is both more and less hacky. It's identical in result to the original code, but takes a roundabout method to get there.
* Sprite references for SUPE, SUPZ and NDRL are removed because they are now unused.
* Helper's flashing conditional is restructured to do less flag swapping.
* The check for super setting FF_FULLBRIGHT is limited to MAXTRANSLATIONS now, and also correctly takes into account MAXSKINCOLORS == SKINCOLOR_SUPERSILVER1.
* NiGHTS collision bounds aren't hardcoded anymore.
* NiGHTS link will never display when leaving stage.
* Slightly tweaked rules for the supercolor setting when doing a NiGHTS transformation, but only meaningful for setting FF_FULLBRIGHT.
* if you can turn SF_SUPER, flash your skin's supercolor, otherwise be your normal color
* if your skin doesn't have a SPR2_NGT0 (horizontal fly), use Sonic's (this will hopefully be replaced by 2.2 with sprites of NiGHTS themselves)
* MT_NIGHTSCHAR made irrelevant, everything follows actor->target instead of actor->target->tracer now
* emerald is now player->mo->tracer instead of player->mo->tracer->target
* nightopian helpers flash for the 35 tics before they disappear
* nights capsule makes boss explosions/noises now (i can change it back i just like it better)
* drill off into the sky instead of fly up in floating pose (but no noise yet)
ALSO:
* default maxdash is now 70
* forgot to add supercolor to lua, it is there now
* SPR2_SMSL renamed to SPR2_SSTN (stun)
* any player with a skincolor that's in the super range is set to FF_FULLBRIGHT at state-set time, so no need to keep super players non-fullbright just because they use spin stuff
OpenGL planes fix
This branch removes a specific hack in the OpenGL code for detecting if a plane is for the floor or ceiling of a sector. This it turns out fixes ceiling slopes in Boinciel's SUGOI map going missing. Though, It doesn't fix that other glitch with one FOF (must be unrelated).
If you want to test these fixes out properly, make sure working in-level sectors, FOFs AND also polyobjects all still work fine, sloped or not.
See merge request !97
Fof slope crash fix
This fixes yet another software renderer crash, this time relating to sloped FOFs: sometimes the renderer thinks parts of FOFs where the top and bottom heights are the same height are actually the bottom going through the top (in other words a negative height). This causes problems when drawing normal walls around such FOFs since the game obviously doesn't expect negative heights anywhere along the FOF - before slopes, the game could just flip around the top and bottom heights automatically with no problems. This branch also should fix crashes for all genuine cases of negative FOF heights when slopes are involved, I suppose.
Hopefully this stops FuriousFox's SUGOI map crashing for the time being, all seemed fine when I tested it out myself.
See merge request !96
* Don't allow arbitrary numbers to be used for a skin's supercolor, only strings.
* Devmode is no fun allowed mode, so turn off the god hyper flash there.
* Several new supercolours.
- SKINCOLOR_SUPERSILVER1-5 (for fun) - "Silver"
- SKINCOLOR_SUPERPERIDOT1-5 (nyeheheh) - "Peridot"
- SKINCOLOR_SUPERCYAN1-5 (for fun) - "Cyan"
- SKINCOLOR_SUPERPURPLE1-5 (for fun) - "Purple"
- SKINCOLOR_SUPERRUST1-5 (mecha/metal sonic) - "Rust"
- SKINCOLOR_SUPERTAN1-5 (shadow/silver the hedgehog) - "Tan"
* SKINCOLOR_SUPER1-5 renamed to SKINCOLOR_SUPERGOLD1-5, one index for darkest is changed - "Gold"
* SKINCOLOR_TSUPER1-5 renamed to SKINCOLOR_SUPERORANGE1-5, ported properly to the new palette - "Orange"
* SKINCOLOR_KSUPER1-5 renamed to SKINCOLOR_SUPERRED1-5, ported properly to the new palette - "Red"
* new S_SKIN attribute - supercolor - uses an entirely different function to get the names (R_GetSuperColorByName instead of R_GetColorByName)
* a fun little secret - typing "god on" in the console whilst super makes the player hyper (visual only, no sparkles - just rainbow flash) - can be removed if no fun is allowed
-warp checking for invalid map names
I've noticed a bunch of new people getting the "Cannot warp to map 0 (out of range)" error when testing their custom maps. On asking what map name they used, it was clear they didn't use a MAPxx name at all. Sadly it was not obvious to them that other kind of map names are not accepted by SRB2, so I thought it best we make that more clear in-game.
SRB2 now gives you the error "Cannot warp to map \[your input\] (invalid map name)" if you used -warp with a param that is neither a MAPxx name or a plain number.
See merge request !99
Fix R_AddSingleSpriteDef's I_Error messages
Whoops, seems I forgot about this little branch. Basically this fixes how for a character's sprites, a full sprite lump name is displayed instead of just its sprite prefix in the "R_AddSingleSpriteDef: No patches found for [sprite prefix] frame [frame character]" message (unlike when it occurs for non-character sprites), resulting in something like "R_AddSingleSpriteDef: No patches found for PLAYC2C8 frame \^" which does NOT help custom character authors at all as it just confuses them instead. (for the record, the problem would actually with the ^ frame and not the ones displayed after "PLAY")
Oh, and the same problem is also fixed for this similar message: "R_AddSingleSpriteDef: Sprite [sprite prefix] frame [frame character] is missing rotations"
See merge request !95
Spr2 freeslots
Needed for Miles, generally a good idea to have around anyway. Considering Miles uses it without problems, seems to work fine.
See merge request !24
child can be 0 or 1 (or "right" and "left", alternatively)
bbox coord can be 0,1,2 or 3 (or "top", "bottom", "left" and "right", alternatively)
Also added some support for bbox userdata taking "top" "bottom" "left" "right" fields. Not that there's any use for non-node bbox userdata just yet...
for some apparent reason the compiler didn't like the while loop condition edit on its own (it complained about inline failures for P_MobjReadyToTrigger for some reason), so I had to add that extra bit above the while loop... and it was happy again, huh
If you want more specifics, sloped FOFs are to blame it turns out: sometimes the bottom of an FOF wall blocking a segment of an in-level wall column can be considered ABOVE the top part of the FOF there (yikes), and then the dc_y* values go offscreen, and then BOOM
* Press spin in midair to make the shield flash solid repeatedly and make a number of ding noises.
* When the player with a flashing, dinging shield hits the ground, they are sent off in spinning form at the maximum of 2*abs(momz) VS the 3D hypotenuse of momx, momy, and momz.
Software crashes fix... fix
Fixes a typo introduced by merge request !75 that caused upper textures to set the wrong ceiling clipping value when not visible, allowing all sorts behind the walls to be visible. This is most noticable in GFZ2 when the inside of the tunnel section is visible
...probably a good idea to make sure this one doesn't introduce any MORE visual glitches by mistake (again, compare with 2.1.15 if possible)
See merge request !93
Fix for flats with transparent pixels on slopes
This fixes how R_DrawTiltedSplat_8 unintentionally allows the cyan pixels to NOT be considered "transparent" if after being remapped, depending on sector brightness and/or linedef type 606 colormaps, the result of remapping is not palette index 247 (the cyan we typically turn transparent). That is, the original colors from the source flat graphic are not checked, but instead the __result__ of coloring the flat under the respective colormap is checked for "transparent" pixels. This is only a problem for the tilted splat drawing function, not the regular one for non-sloped planes with cyan-pixel-using flats.
I found out about this bug from the issues Ritz was having with sloped 255-alpha translucent FOFs using transparent flats and his custom COLORMAP lump (and later when he applied a linedef type 606 colormap to the FOF) for his custom map. Thankfully he has some workarounds, but this should fix the code-side issues that caused his problems in the first place.
I also fixed stuff with another splat drawing function that's not currently used atm (maybe it will be in the future, if splats themselves are ever enabled again? *shrugs*).
See merge request !92
Skybox rendering offset fix for third person/alt view camera
Fixes the issue reported in this thread: https://mb.srb2.org/showthread.php?t=41729
I dunno if this will negatively affect any existing skyboxes in SRB2's own levels, that said. I tried out THZ2 and CEZ1 with this fix at least but I forgot to compare them with how they are in 2.1.15 so _*shrugs_*
See merge request !94
OS X Makefile build setup
This merge request:
* Cleans up the OS X bundle resource location code and fixes a SIGSEGV and memory leak
* Simplifies and fixes the OS X desktop alert code, closing more leaks
* Adds the MACOSX build flag to the Makefiles, to allow building a binary (but not Mac app yet) of SRB2.
This is intended to make it easier for developers to build on Mac OS X, without having to pull in all of XCode. You can keep using CMake if you prefer.
To test, use `make -C src MACOSX=1 NONX86=1 SDL=1 NOASM=1` for a release build.
Left to do:
* Add a content bundling script to be run after building, and a flag to trigger doing that.
`MACOSX_BUNDLE` maybe?
* Somehow get access to a Mac running PowerPC and figure out how to build a multi-platform binary.
* Add the proper magic to compile using gcc if requested. (Right now, compilation is done via LLVM/Clang)
See merge request !72
Gas jets, fan objects, springs and slopes
Whoop whoop whoop minor bugs that only get noticed due to weird experiments whoop whoop whoop
* For gas jets only: the object's standingslope is ALWAYS null. No drifting down the slope for you.
* For gas jets and fan objects: Now checks whether the player's top is below the bottom of the launcher, instead of its bottom. zdist calculation not affected, since it's signed and okay with being negative by about the height of the player.
* For all 3: the player's standingslope is NULL'd so the player isn't launched off at a wacky angle if they're standing on a slope then walk into the thing.
See merge request !91
Remove i_net.c
The code in i_net.c doesn't actually seem to be used in SRB2. I was able to compile a build without it, and hosting and joining netgames worked just fine (well, as fine as they can with the current state of the netcode...).
The vast majority of code in the file seems to be contained in HAVE_SDLNET ifdefs, and I'm pretty sure SRB2 has never used SDLNET in a public build. The only bit not contained in that block is I_InitNetwork(), which just prints an error and returns false.
Do we really need to keep it around? If not, I say get rid of it. It seems like useless clutter that is just going to confuse people who are trying to understand the source code.
See merge request !73
Re-factoring AA tree code from m_misc.c/m_misc.h into its own files
What the title says. The AA tree-related code now lives in the files m_aatree.c and m_aatree.h. Part of why I did this was to solve this m_misc.h/w_wad.h cyclic dependency problem (involving MAX_WADPATH and AA trees themselves) mentioned in the now-removed comments, another reason was ...only OpenGL uses AA trees at all, why include the relevent structs/functions/otherwise anywhere except where is necessary (which is very few files as it turns out)?
Otherwise, it just looked better on its own rather than mixed with all the other stuff already in the m_misc files. Not really important or anything affecting gameplay at all I guess.
See merge request !82
* When moving slowly, P_InstaThrust at S_SKIN's maxdash forward, and set momz to S_SKIN's mindash upwards. Plays a tok noise (not thok). Hurts enemies/bosses, busts spikes/monitors/all types of bustable blocks.
* When moving quickly... doesn't do anything yet, but WILL do a slide.
Also, P_DoSpinDash is now renamed to P_DoSpinAbility, and CA_TWINSPIN users can bust all bustable blocks on collision too.
* CA_TWINSPIN - you can do it multiple times
* CA_DOUBLEJUMP - your jump height is reduced each time, like in Kirby games. The number of extra jumps once you've left the ground that are available is determined by the character's actionspd.
* Electric sparks coming off entire body instead of bubbles coming out mouth
* Different sounds.
* Different icons.
These sprites are currently local only, but I'll be doing a lot of asset updating this evening since Rob asked me to so it won't be long until you can get them.
Sideways springs, horizontal hog-launchers, perpendicular plungers...
Call them what you like, they're in the code now. And have been for months!
Nev3r uses the hell out of these and I'm fed up of them being <!>'s all over the place, so please have 'em in master so we can update srb2.srb and make things better for all of us.
See merge request !30
* FF_MIDDLESTARTCHANCE - has a 50% chance of starting the spr2 or FF_ANIMATE animation halfway in
* FF_SPR2ENDSTATE - if var1 == S_NULL, don't loop, just stop incrementing the frames. Otherwise, go to the state represented by var1.
The former is just something I did for fun, the latter is something that'll come in handy when porting in new-character-moves.
Setup:
* S_SKIN needs an "availability" line. Set to 0 to have always available, otherwise is assumed to be UINT8 unlockable number. If it's a valid unlockable, its name will be copied over with the character's realname.
* Define an unlockable via SOC or hardcode. If you don't want it visible on the Secrets menu, just set its type to None. Everything else is as normal - you can set the conditionset to whatever, objective, height, nochecklist, nocecho...
* radius - sets the player's radius for that skin.
* height - sets the player's normal height for that skin.
* spinheight - sets the player's spinheight for that skin.
* shieldscale - see http://i.imgur.com/BQ5DhKC.png for justification
R_SkinUnlock defines the circumstances under which a skin is available. For simplicty's sake, I've currently bound it to an S_SKIN variable so I can toggle it easily, but it WILL be replaced with a hook into the savegame system at some point.
* Currently has three tiers of unlock - freebie (forceskin or modeattacking via a loaded replay), Ringslinger Only, and SP/Coop and Ringslinger.
* I don't know anything about netcode so I basically decided to make R_SkinUnlock relevant only under local circumstances, try as hard as possible to stop bad skin info from getting sent to the server, and then admit defeat once the server has the information. If this is a bad choice, please discipline me and show me how to fix it.
* Character Select now checks for whether the character is hidden or not on menu load and does/undoes it based on that info, but will never touch one disabled via SOC. I also used this opportunity to optimise, checking for/filling out charsel pictures instead of doing it later. (It now also includes special casing for a select screen with zero characters!)
* Mode Attack now hides hidden characters in its character select based on SP rules.
Things that still need to be done:
* ForceSkin_OnChange. Is there a graceful way to handle this?
* No obvious skin name conflicts. Add a salt to the names of hidden skins, and then remove it when they're unhidden?
* The gap between Knuckles' skin number and the first custom character anybody adds will be way too obvious. A seperate hidden skin numbering system? Start at 32 and count up from there? There's a few ways...
* If a character select character image is not set, don't iterate every tic - iterate on first image get and then save to the struct.
* A character select screen with only two characters now has special case handling.
* A memory leak in the making has been plugged. (specifically, picname not being Z_Free'd if the loop fails to do so)
* Logic/operation simplification.
Also, some typo corrections and clarity case movements of stuff in other files I've been looking at.
* SF_NOJUMPSPIN - Player's height is full whilst jumping, SPR2_JUMP defaults to SPR2_SPNG instead of SPR2_SPIN, and the player goes into fall frames if they start moving downwards or use their ability.
* PA_JUMP - for jumping (upwards in the case of SF_NOJUMPSPIN.
* SF_NOJUMPDAMAGE - Ala rosy.wad, don't damage enemies, etc when jumping into them.
* SF_STOMPDAMAGE - Just for fun. Ala in Mario, always damage enemies when you land on top of them (your gravity reference, not theirs).
* SF_MARIODAMAGE - SF_NOJUMPDAMAGE|SF_STOMPDAMAGE is reasonably accurate to the Mario games, and might as well be surfaced as such.
Also, a minor change:
* Instead of not spawning the revitem if your SPR2_ is SPR2_DASH, don't spawn it if it's set to 0. This requires the player.dta I uploaded a couple days ago to behave as it was previously.
* Don't get stuck in spindash frames if your maxdash is 0, and don't flash rolling frames if you're on goop.
* Characters disabled through SOC are outright removed. No awkward gap in scrolling - no hint they were ever there in the first place.
* Vertical loop - the character select images are visually continuous. No matter where you are in the chain, you'll always see a hint of the character above or below your current selection in the chain.
* Smooth scrolling - Moto and Prime showed me a gfy from back during 2.1 development where it was super smooth. I didn't make it as slow as that one, but the smoothness was easy to add and the reason it was removed previously - gaps in the character select leading to varying speeds - is no longer relevant.
* SPR2_PEEL, SPR2_SPEE.
* S_PLAY_PEEL, S_PLAY_SUPER_PEEL.
* PA_PEEL.
* Dashmode actually starts charging from runspeed instead of the arbitrarily calculated (normalspeed - 5*FRACUNIT). This just made things easier, honestly, and it's 1 FU of difference compared to the current test case.
- Press spin in midair to stomp directly downwards (losing horizontal momentum), creating a flickering fireball around you.
- No bouncing on enemies, item boxes, etc - just go straight through.
- Hurts other players on touch whilst you're stomping.
- Spawns a bunch of flames around you when you hit the ground.
Also:
- Electric shield's ability now uses different sounds, because I'm picky.
- Now checks whether the player's top is below the bottom of the fan/gas jet, instead of its bottom. zdist calculation not affected.
- mo->standingslope is NULL'd so the player isn't launched off at a wacky angle. (I also did this for springs, since Prime mentioned it was a problem for them too.)
Some slope improvements/fixes (plus P_GetMobjGravity)
Dear Red, I did some things.
* Made the slope flag SL_NOPHYSICS actually have an effect like we wanted to, but didn't get around to implementing yet - activated by setting the slope's linedef flags to have ML_NOSONIC.
* Made downhill slope thrusts proportional to an object's gravity and friction.
* To make the above happen - seperated out the gravity value finding code in P_CheckGravity into a seperate function, P_GetMobjGravity. (p_mobj.c, p_local.h) I also made this function available to Lua.
* Turned those PANIC n console messages (which would inevitably be followed up with a crash, since we're accessing invalid memory immediately after) into a descriptive I_Error.
* Put the SRB2CB type-shimming behind an ESLOPE_TYPESHIM ifdef.
* Removed SPRINGCLEAN-ifdef'd code.
* Cleaned up some eosteric comments.
* NEW SINCE RED +1'd THIS: The teetering code now takes slopes into account pretty well. There are edge circumstances as outlined in commit 9d221f4f3f, but this is unilaterally better behaviour in every way and the teetering code was kind of a mess anyways.
* NEW SINCE RED AND ALAM +1'd THIS: P_ReverseQuantiseMomentumToSlope. Simple function that replaces the inverse angle stuff (which also wasn't using InvAngle, just ANGLE_MAX - angle - which is inaccurate!!)
Current testing files available at /toaster/slptst3.wad and /toaster/gravitytest.lua on the ftp.
I want to do more to the branch like implement SL_ANCHORVERTEX in the near future, but this is probably safe to merge in its current state.
See merge request !77
The whole thing needs a refactor in general, but it's almost 2am here, I need my sleeb, and this fix would probably break something with 2.1 climbing if I made it any more/less (depending on viewpoint) complicated.
Sectorlist traversal
MOM GET THE CAMERA
There's a LOT of code in the source that ended up mixing m_snext (the node for the next thing in the sector's thinglist) and m_tnext (the node for the next sector in the thing's sectorlist), so I renamed the following:
* m_snext ==> m_thinglist_next
* m_sprev ==> m_thinglist_prev
* m_tnext ==> m_sectorlist_next
* m_tprev ==> m_sectorlist_prev
Then, I changed all the instances where the code was trying to go m_thinglist_next on a mobj's touching_sectorlist (which would've just gone to the node for the next thing in the same sector, instead of the node for the next sector for the same thing). Notable samples:
* FF_SHATTER blocks now disappear the moment you go into their sector. You still can't give FF_SOLID to them because in that case they will still stop you if you never enter their sector at all (ie - clip on corners), but having them nonsolid no longer allows you to phase through entirely without busting them (which was the whole downside of making them intangible in the first place).
* You can now bump into multiple Mario blocks at a time, even if you're not exclusively in their sector.
* No more getting randomly stopped on the edges of bouncy FOFs.
* Landing on polyobjects might behave a little more consistently at the edge of their host sector.
* Teetering did a SHITTON of code that basically never got executed, and then had directly-blockmap-accessing code as a backup. The code was activatable by replacing the m_thinglist_next with m_sectorlist_next, but it behaved SUPER differently from what we're used to with teetering (if the player mobj's edge was JUST off the edge of a platform, you ended up in teetering frames - even if it looked like you could stand) so I ended up removing that section entirely.
Any objections?
See merge request !85
Fixes and changes related to the act of setting up a level (in other words, setup fixes)
Changes made in this branch so far:
* a REJECT lump of zero length (NOT to be confused with a REJECT lump of non-zero length with all-zeros, just to clarify) should no longer cause problems with netgames and otherwise. The game now checks if the lump exists, has the right name, and length is not zero - if it fails any of these, the REJECT lump is not loaded and P_CheckSight won't be allowed to use it. This means ZDBSP (no reject) should be safe(r) to use now!
* there's now a simple devmode-only message (requires "Setup" mode) if a sector is found to have no lines at all during setup. It's a far cry from the plot to I_Error the game I once had for that unsusal scenario, but such a level still works anyway so whatever.
See merge request !87
FF_REVERSEPLATFORM clipping
Ran into an issue whilst testing out one last feature (there's always one more...) for flat_alignment_revamp. This is a backported fix.
The bug was such that if you're falling through a platform with FF_REVERSEPLATFORM and not FF_PLATFORM, you'll be pushed downwards such that your head is against the bottom of the FOF. This just checks momz is greater than zero if it has FF_REVERSEPLATFORM to make sure it's okay to set ceilingz. (OR the alternative in reverse gravity.)
No test map because this was originally done for internal. Instead, test it on the other branch's test map.
See merge request !83
Software crashes fix
This branch SHOULD fix the many crashes people have reported lately that all point to the software renderer. Simply put, the software renderer allowed stuff to be drawn out of the screen even though that wasn't safe, and even the existing checks to prevent that didn't work.
If you saw me worrying about the sky HOMs I discovered in AGZ earlier in the commits for this branch, don't worry - it turns out that issue already existed in 2.1.15's srb2win.exe (and probably srb2dd.exe too) anyway, the changes in this branch didn't cause them. Hopefully nothing else broke then.
See merge request !75
Also, the teetering angle on slopes is now FRACUNIT/2 because there's literally no way to stand still on a slope that steep unless it doesn't have physics.
This means the current skewing-by-default effect isn't changed, and OpenGL's equivalent code doesn't have to be touched since apparently it was already like that.
This should mean that maps built with ZBSDP (no reject) should have less or no problems in netgames compared to the standard ZenNode maps now, hopefully. =)
note: once this is merged into internal, you should probably remove me from "programming assistance" so i'm not duplicated for no clear reason. unless you want me to slowly take over every section in the credits >:3c
"frontsector" in this part of the code isn't actually the polyobject's sector for back-side polyobject segs, it's the in-level sector the polyobject as a whole is being rendered in it turns out.
Red apparently left in code for single-sided linedefs to NOT skew their midtextures ...but it doesn't work because it doesn't stop the skewing code from running instead, regardless of whether Effect 1 is on or not. If it's decided single-sided line midtextures shouldn't do this though, the non-skew code could just as well be thrown out lol (or something else I guess?)
When I first wrote this, I thought the .h file that contained a function declaration needed to have the same name as the .c file the function was in. Now I know that's not the case, off to p_local.h with you.
Two interesting points of note:
* The touchspecial sector flag seems to actually do its job now.
* Detection of sectors with polyobjects in seems to have done this incorrectly, but this doesn't mess with anything about touching the polies themselves so it seems to really only handle edge cases where the polyobject was too close to the border of another sector (which would've likely made rendering glitches anyways).
* There was a whole swathe of teetering code that was basically never run properly because of this mistake. I did a simple fix at first, but you started teetering whenever you were slightly less than your radius away from a sector's edge, which was completely different and undesirable behaviour. Instead, I cut out the code that was never running, and just left the hacky method in instead since it was more accurate to what we want in general.
Issue was caused by attempting to traverse the sector's thing-touching-list across all the things in the sector (which would inevitably have the same sector as the first node in mobj->touching_sectorlist) instead of traversing the thing's sector-touching-list (which has the same thing but different sector references).
I wonder how many times AJ copypasted this code with absolutely no idea why it wasn't working properly. I'll figure that out tomorrow, maybe set up some compiler macros so this mistake is never made again. For now, I must sleeb.
Behaves ALMOST as you'd expect. It gets the z position of the slope at the player coordinates when it comes to the sectorlist check (which is first), though, so there's a few oddities that are amplified with steep slopes:
* If the slope's sloping away from you at a steep angle, you might not be able to step down onto it, but you won't teeter (because it's at a step-down-able height if it extended to directly beneath you)
* If the slope's sloping towards you at a steep angle, you might end up in teetering frames when you're able to step down onto it (because it's NOT at a step-down-able height if it extended to directly beneath you)
HOWEVER, it would be pretty obnoxious to hold back code which is functionally superior in every way otherwise, and it doesn't really seem like there's a good way to get that checked tbph
* If there's items in it set the FOF's floor and ceiling flats to that of the backside sector's ceiling
* Otherwise, set them to that of the backside sector's floor.
Otherwise, the flats do not change.
This allows for SMW style blocks which are much darker when empty then full on all sides.
* Only change texture when stationary or moving down, for additional fidelity to source material. This has zero overhead, and actually might REDUCE lag in some circumstances... my nitpickiness wins again.
* Apply ML_EFFECT1 to it to make it invisible and intangible (removing (FF_SOLID|FF_RENDERALL|FF_CUTLEVEL) from it) from every side except the bottom. Becomes visible and tangible when it's hit once. Might fuck over players in mp, but really our Mario blocks are so high in the air (and we'd need to update Pipe Towers to take advantage anyways) that they're super unlikely to get a kill this way
* Checks for the Brick Block have been switched over to the presence of FF_SHATTERBOTTOM instead of checking for the source linedef's flags every time.
For the object...
* Tag via its angle field
* Number of objects to spawn per tic around it via its z field, if zero then just spawn at center
* Is flipped if given MTF_OBJECTFLIP.
Now there's a linedef type 15!
* Tag is tag of object(s!)
* Object type set via concatenation of frontside textures, MT_PARTICLE is default
* The length of the linedef is the radius the particle is spawned out (zeroed if z field is 0)
* Frontside x offset is speed upwards
* Frontside y offset is number of degrees to turn each tic (zeroed if z field is 0)
* Frontside floor and ceiling heights are the heights in which the particle is bound through some fun mathematics and/or BDSM
Of course, not every story has a happy ending.
* A_ParticleSpawn no longer accepts objects via its var1 because of how specialised it's gotten. Considering it can be set via abuse of actor->cvmem, I don't consider this an issue. Maybe you might disagree.
Also updated any relevant project files that I can think of to include the new files, as well as the makefile of course. Some of the other project files haven't been touched in years so I'll leave those alone ...unless someone objects
Linedef type 4 now works as follows.
* Frontside x offset is dash speed.
* Effect 4 flag doesn't center the player. (same as before)
* Effect 5 flag sends them off in rolling frames. (as a result there is only one speed pad sector type now, not two)
* Frontside upper texture is sound to play on launch, defaults to sfx_spdpad when not given
Linedef type 14 (Bustable block parameter)
* Applied to one of the linedefs of any FOF's control sector
* Concatenation of frontside textures is MT_ object type to spawn, defaults to MT_ROCKCRUMBLE1 if not present
* Sound played when being busted is object type's activesound
* Frontside x offset is spacing (in fracunits) of spawned particles, defaults to 32<<FRACBITS
* Frontside y offset is the fuse of spawned particles in tics, defaults to 3*TICRATE, if set to -1 assume infinite lifetime
* Effect 1/Slope Skew flag makes particles fly out
Linedef type 250 (Mario Block):
* No Climb flag turns it into a brick block (busts when hit from the bottom, player hits their head/fist/whatever, no more upwards momentum)
