This replaces all remaining magic numbers with enumerations thereof.
It also tweaks the following, even though most will be irrelevant post-rewrite:
-Remove unused menus
-Properly center the nuke icon in Duke and the star icon in NAM
-Fix the multiplayer macro editing menu:
--Position the currently editing quote its proper spot instead of beneath the first row
--Don't highlight the first quote while editing a different one
--Select the quote just edited when finished editing instead of the first one
-Fix the cursor of a centered text input field (such as the adult mode password)
-Implement proper shade glowing of selected menu entries in Joystick Settings, Joystick Axes, and Joystick Dead Zones
-Shift the the Joystick Axes menu down to avoid overlapping the title bar
-Change the title of mouse digital axis assignment "Digital Axes Setup" instead of "Advanced Mouse"
-Fix the behavior of the Next button in Joystick Dead Zones to not act like a scrollbar
git-svn-id: https://svn.eduke32.com/eduke32@4399 1a8010ca-5511-0410-912e-c29ae57300e0
With this mode, the near distance of the linear fog is always 0, unlike being
negative with r_usenewshading 2.
git-svn-id: https://svn.eduke32.com/eduke32@4393 1a8010ca-5511-0410-912e-c29ae57300e0
Fix a case in G_MovePlayers(), where the player sprite's shade is approached
toward the ceiling/floor's shade. Before, it could stop at one above or below!
git-svn-id: https://svn.eduke32.com/eduke32@4392 1a8010ca-5511-0410-912e-c29ae57300e0
Also add two static assertions checking that the obituary quotes don't go
out of the MAXQUOTES bound. BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4391 1a8010ca-5511-0410-912e-c29ae57300e0
In C and Lunatic, split 'jumptoplayer' of enum amoveflags_t / action.MOVFLAGS
into 'jumptoplayer_bits' and 'jumptoplayer_only' (see updated Lunatic doc).
git-svn-id: https://svn.eduke32.com/eduke32@4378 1a8010ca-5511-0410-912e-c29ae57300e0
That is, always bitwise-OR the per-tile actor flags with the existing ones.
git-svn-id: https://svn.eduke32.com/eduke32@4374 1a8010ca-5511-0410-912e-c29ae57300e0
Reserved bits are those that have no predefined SFLAG_* label in CON.
git-svn-id: https://svn.eduke32.com/eduke32@4372 1a8010ca-5511-0410-912e-c29ae57300e0
This flag is set from C for some enemies that should not be pushed back when
damaged, such as TANK. Both the tile flag and the per-sprite flag are used
(i.e. the ultimate flag value is the XOR of the two).
Add currently non-functional example to test.lua that attempts to set this bit
for NEWBEAST.
git-svn-id: https://svn.eduke32.com/eduke32@4371 1a8010ca-5511-0410-912e-c29ae57300e0
Unlike in C-CON, it only tries an exact match with the given and uppercased
label, not "full" case-insensitive search.
git-svn-id: https://svn.eduke32.com/eduke32@4370 1a8010ca-5511-0410-912e-c29ae57300e0
Make Mapster32 save as map-text if there is a wall with non-zero 'blend'.
git-svn-id: https://svn.eduke32.com/eduke32@4368 1a8010ca-5511-0410-912e-c29ae57300e0
For a 1680x1050 scene standing directly in front of a mirror, this increases
FPS from ~90 to ~95 for me.
git-svn-id: https://svn.eduke32.com/eduke32@4363 1a8010ca-5511-0410-912e-c29ae57300e0
Given highlighted sectors, these take the arithmetic mean of their ceiling's
or floor's (respectively) z, removing the slope bit from all, and setting the
new z to the mean one, rounded down to 1024 Build z units (one PGUP/PGDN).
BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4357 1a8010ca-5511-0410-912e-c29ae57300e0
We shouldn't be using its actor[].t_data[8] because that one is used by the
sprite rotation-fixing system (which fixes STAT_FX sprites to the positions
relative to the pivot, too).
Test case source/lunatic/test/delmusicsfx.lua still passes with this
modification.
git-svn-id: https://svn.eduke32.com/eduke32@4352 1a8010ca-5511-0410-912e-c29ae57300e0
It now accepts a number of tables to create as 3rd arg. The function that
create_trans() takes as the 2nd argument is now being passed
(r,g,b, R,G,B, tablei, numtables).
Rewrite create_additive_trans() in terms of it.
Rename create_128_trans() -> create_alpha_trans().
git-svn-id: https://svn.eduke32.com/eduke32@4347 1a8010ca-5511-0410-912e-c29ae57300e0
One potential use is to add r_togglecomposition "0" if you don't like Aero turning on and off every time you switch between 2D mode and 32-bit 3D mode.
git-svn-id: https://svn.eduke32.com/eduke32@4344 1a8010ca-5511-0410-912e-c29ae57300e0
engine.setupDebugBasePal() set up the water base palette such each of the first
15 "ramps" of 16 consecutive colors has a single, "representative" color. For
example, color indices 0-15 and black, 16-31 are dark gray.
In shadexfog.lua, list remappings from LOOKUP.DAT that are expressible as
remappings of 16-tuples.
git-svn-id: https://svn.eduke32.com/eduke32@4337 1a8010ca-5511-0410-912e-c29ae57300e0
- Mapster32: before loading LOOKUP.DAT, set palookup[0][239]=239 to
make an identity map of the base shade table's shade 0
- Rewrite color index remapping case of makepalookup() for clarity
BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4336 1a8010ca-5511-0410-912e-c29ae57300e0
As opposed to the previous way, where the first fog pals was <numlookups>+1,
where <numlookups> is the first byte value of LOOKUP.DAT. This allows to
pack e.g. lookups [1 .. 25] and [30 .. <lastpal>] into LOOKUP.DAT and have fog
pals be generated at pals [26 .. 29] (i.e. the additional lookups don't
shift the fog pals, making user maps depending on these numbers not look as
intended.)
git-svn-id: https://svn.eduke32.com/eduke32@4335 1a8010ca-5511-0410-912e-c29ae57300e0
Also, error if didn't read enough data and account for TITLE and REALMS
swap between basepal number and on-disk order (sigh).
git-svn-id: https://svn.eduke32.com/eduke32@4334 1a8010ca-5511-0410-912e-c29ae57300e0
It must be a power of two in [2 .. 128]. Rewrite test/sprite_access.con's
liztroop example to account for that.
Also, add function shadexfog.create_trans() which aceepts a function
(r,g,b,R,G,B) -> blended (r,g,b) and rewrite shadexfog.create_additive_trans()
in terms of it.
git-svn-id: https://svn.eduke32.com/eduke32@4333 1a8010ca-5511-0410-912e-c29ae57300e0
- Added preprocessor value NETVERSION, to be incremented in the source whenever changes are made to the network protocol.
- Implemented proper server-side version verification of all clients upon connection.
- Implemented connection refusal when we reach MAXPLAYERS. (Should be expanded to implement server player caps.)
- Protected against OOB array accesses if an invalid player id is received.
- Renamed all "Recieve" to "Receive".
git-svn-id: https://svn.eduke32.com/eduke32@4322 1a8010ca-5511-0410-912e-c29ae57300e0
See lunatic/test/sprite_access.con for a LIZTROOP that periodically smoothly
alpha-fades in and out. (Assuming that the 128 alpha blending tables from
shadexfog.create_128_trans(1) are installed.)
BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4313 1a8010ca-5511-0410-912e-c29ae57300e0
Lunatic: also, add an additional argument 'moreblends' to
engine.savePaletteDat() and document that function.
See test/shadexfog.lua for a "user-friendly" wrapper shadexfog.save() which
prints success or errors.
git-svn-id: https://svn.eduke32.com/eduke32@4312 1a8010ca-5511-0410-912e-c29ae57300e0
The function now writes out a full PALETTE.DAT: base balette, shade table and
translucency table.
git-svn-id: https://svn.eduke32.com/eduke32@4311 1a8010ca-5511-0410-912e-c29ae57300e0
On the C side, slightly rewrite (now) getclosestcol_lim() for clarity.
git-svn-id: https://svn.eduke32.com/eduke32@4308 1a8010ca-5511-0410-912e-c29ae57300e0
Also, fix a missed .filler -> g_ambiencePlaying[] rewrite in the editor.
In C-CON, 'detail' is kept as alias to C-side (former) .filler / now .blend,
but that name is *deprecated*.
git-svn-id: https://svn.eduke32.com/eduke32@4305 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes updating the viewscreen in Polymer's ART mapping mode.
git-svn-id: https://svn.eduke32.com/eduke32@4304 1a8010ca-5511-0410-912e-c29ae57300e0
Currently, sprite[].filler (to be renamed) selects a blending table. If none
is installed with that index, the blending table at index 0 is taken (which is
read from PALETTE.DAT on engine startup). Thus, for now, the non-Lunatic build
will never use a custom blending table because there's no way to register one!
But the functionality is there.
git-svn-id: https://svn.eduke32.com/eduke32@4301 1a8010ca-5511-0410-912e-c29ae57300e0
- use SPRITES_OF* iterator macros
- new function: E_SpriteIsValid(); add some safety checks
(e.g. hitag used as sprite index)
- the rest is mostly "the usual code transformations"
git-svn-id: https://svn.eduke32.com/eduke32@4281 1a8010ca-5511-0410-912e-c29ae57300e0
- Make Win+F* also make play and RTS sound, since modern OS's window managers
like to eat Alt-F*. (Some Win+F* may be inaccessible too, but together all
10 should hopefully be covered.)
- Fix an issue where keys other than F1-F10 were considered as starting an RTS
sound and crashing EDuke32 in the process
git-svn-id: https://svn.eduke32.com/eduke32@4278 1a8010ca-5511-0410-912e-c29ae57300e0
In the non-Lunatic build naturally, since the Lunatic one uses its own member.
git-svn-id: https://svn.eduke32.com/eduke32@4275 1a8010ca-5511-0410-912e-c29ae57300e0
It's functional, but due to the odd 37.8 KHz nature of the format, I will need to add a resampler to the audiolib to prevent the aliasing artifacts that occur at present. I also hear clicks/pops every so often, but I do not know if a resampler would fix these as well or if they are a separate problem.
Note that you cannot directly use the four XA files on the Total Meltdown disc because they each contain eight songs. They would need to be split using a utility I wrote that is outside the scope of this SVN.
git-svn-id: https://svn.eduke32.com/eduke32@4268 1a8010ca-5511-0410-912e-c29ae57300e0
EDuke32 has me so accustomed to straight C... using a template and pass-by-reference makes my day.
git-svn-id: https://svn.eduke32.com/eduke32@4267 1a8010ca-5511-0410-912e-c29ae57300e0
In simple cases, it should be added. Combinations of alignment across TROR
boundaries and bottom-swapping will probably not work right.
git-svn-id: https://svn.eduke32.com/eduke32@4265 1a8010ca-5511-0410-912e-c29ae57300e0
Concretely, in the "behind, outside" case, draw the sprite early if any of its
2 or 4 corner points are behind the masked wall, and inside the cone or on the
other outside.
git-svn-id: https://svn.eduke32.com/eduke32@4264 1a8010ca-5511-0410-912e-c29ae57300e0
Also, in LunaCON, make player .palette member read-only. BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4260 1a8010ca-5511-0410-912e-c29ae57300e0
This prevents a crash and maybe other badnesses when e.g. loading a map
with ART tiles, doing something that allocates a reserved tile (such as
looking into a viewscreen), then loading another map where the tilesiz*
of TILE_VIEWSCR is restored to 0.
git-svn-id: https://svn.eduke32.com/eduke32@4259 1a8010ca-5511-0410-912e-c29ae57300e0
Actually, right now, any first arg starting with '-' will show the usage.
git-svn-id: https://svn.eduke32.com/eduke32@4258 1a8010ca-5511-0410-912e-c29ae57300e0
When a map named <filename>.map is loaded (<filename> may also contain directory
separators), the engine checks for existence of <filename>_XX.art in the virtual
file system, where XX is a 0-padded number from 00 to 19. It loads a consecutive
sequence of these ART files, i.e. aborts whenever a number in the sequence isn't
found (in contrast to normal ART loading).
Restrictions:
- the per-map ART files must not reside in ZIP files
- if a tile number is attempted to be overridden that has a dummytile or is
cache1d-locked, per-map ART loading fails
On failure, the map is still loaded, but a diagnostic message is output to the
log/OSD.
Loaded per-map ART data are cleared whenever the map is "left". In particular:
- whenever another map is loaded
- in the editor: when a new map is started
- in the game: after the bonus ending screen of a finished level, after going
to the title screen via the menu
A final note: file names are supposed to be looked up and compared
case-sensitively. That is, <filename> must match EXACTLY between the map's and
per-map ART one; 'art' must be lowercase. Otherwise, the cookie monster will
come and eat you!
BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4257 1a8010ca-5511-0410-912e-c29ae57300e0
These hacks could no longer be allowed to co-opt the fake multiplayer mode, used for local testing and mod development.
I have half a mind to remove the hacks outright because they could be likened to drilling bolts directly into your car engine just so you could mount a bowling ball as a hood ornament. However, I don't want to take away the splitscreen hack mod from anyone who uses it, and the work done on these hacks should be useful if proper splitscreen were implemented internally using per-player input and multiple renderer/audio passes.
git-svn-id: https://svn.eduke32.com/eduke32@4249 1a8010ca-5511-0410-912e-c29ae57300e0
You can:
-Cycle your position through all DM or coop spawn points.
-Jump to the primary spawn point.
-Dump full spawn point information to the log file.
git-svn-id: https://svn.eduke32.com/eduke32@4245 1a8010ca-5511-0410-912e-c29ae57300e0
Available in the game and editor. Provide test/shadexfog.lua, containing a
function to creating a set of 32 shade tables corresponding to different shades
of the same fog palookup table, together with some tests and convenience
functions.
Also,
- Add gv.LUNATIC_CLIENT{,_EDUKE32,_MAPSTER32}
- Add LUNATIC_FIRST_TIME in the global env for the game
- defs_m32.lua: add reload() convenience function
- Failed attempt at recreating the base shade table. It is NOT a linear ramp
of the base palette colors to (0,0,0). That is, it's not created by
build/util/transpal.exe!
git-svn-id: https://svn.eduke32.com/eduke32@4236 1a8010ca-5511-0410-912e-c29ae57300e0
It is unacceptable that yvel is on one hand modifiable without restriction from
scripting, but can be used as an array index without prior bound check in the C
code. Because that member has an overloaded meaning and is also used for
innocuous purposes such as the green color intensity of an SE light, it's
infeasible to restrict access from scripting. Consequently, we must add bound
checks on the C side. This is the first part of the effort to make .yvel safe,
adding two functions P_Get() and P_GetP(). There are a couple of other uses as
some kind of index.
git-svn-id: https://svn.eduke32.com/eduke32@4226 1a8010ca-5511-0410-912e-c29ae57300e0
- in the function itself: for floor, currently, do nothing (but this commit
is in preparation of the next one, again)
- In Proj_MaybeDamageCF(), Proj_MaybeDamageCF2() and the A_RadiusDamage() use
if the function, generalize to floors, but with the special case that
parallaxed floors keep blocking projectiles, as before (in constrast to
parallaxed ceilings). However, Sect_DamageCeilingOrFloor() is only
called for non-parallaxed ceilings *and* floors.
git-svn-id: https://svn.eduke32.com/eduke32@4205 1a8010ca-5511-0410-912e-c29ae57300e0
- factor out: G_WallSpriteDist()
- factor out: Proj_MaybeDamageCF() and Proj_MaybeDamageCF2()
in preparation for the next commit
- Make PROJ_DECAYVELOCITY macro take an arg for readability's sake
git-svn-id: https://svn.eduke32.com/eduke32@4204 1a8010ca-5511-0410-912e-c29ae57300e0
The scrollwheel is unique among PC input because it has no innate "hold length". Previously, the layers gave the mousewheel a fake hold length to allow the not-necessarily-synchronous game/editor code to pick up the input before the layers marked it as "no longer pressed". This passed under Windows, but it didn't slide under SDL.
Besides the two problems listed above, it also potentially limited the rate of weapon selection, where scrolling too fast would not register every clicks. [Unrelatedly, this is still the case when you scroll faster than the game's own tickrate, but addressing that would require rewriting input handling to go through a list of "events" for each tic instead of looking at overall pressed/unpressed states.]
git-svn-id: https://svn.eduke32.com/eduke32@4200 1a8010ca-5511-0410-912e-c29ae57300e0
- Move ARRAY_SIZE() macro to compat.h, add another one ARRAY_SSIZE()
- In A_RadiusDamage(): note maybe-unaligned access issue, prevent unlikely oob
- sector.c: use SPRITES_OF* macros where appropriate
git-svn-id: https://svn.eduke32.com/eduke32@4199 1a8010ca-5511-0410-912e-c29ae57300e0
Exposed by this snippet from a.m32:
getnumber256 .owner "OWNER (projection picnum): " -MAXTILES
Now, Alt+KP2 works as expected in 3D mode.
git-svn-id: https://svn.eduke32.com/eduke32@4196 1a8010ca-5511-0410-912e-c29ae57300e0
And issue warnings whenever the assignment would fail (error) at game time.
git-svn-id: https://svn.eduke32.com/eduke32@4195 1a8010ca-5511-0410-912e-c29ae57300e0
This requires enabling the same workaround as for Linux. Maybe it's not
system-dependent at all.
git-svn-id: https://svn.eduke32.com/eduke32@4193 1a8010ca-5511-0410-912e-c29ae57300e0
This generally fixes demo playback. Before, tilesizx[]/tilesizy[] were written
into twice as many bytes as needed. Now, don't do that at all.
git-svn-id: https://svn.eduke32.com/eduke32@4191 1a8010ca-5511-0410-912e-c29ae57300e0
Important because in Lua, a value of zero yields true in a boolean context.
BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4184 1a8010ca-5511-0410-912e-c29ae57300e0
I was checking for GCC >= 4.7, while Clangs pretends to be GCC 4.2. Use a
feature test macro instead. The comment I made in r4161 regarding GCC vs.
Clang code was wrong. Now, Clang generates slightly faster code for these cases
(solid and masked 4-pixel wide vlines).
git-svn-id: https://svn.eduke32.com/eduke32@4182 1a8010ca-5511-0410-912e-c29ae57300e0
In particular, (int32_t)j != -1 is replaced by (uint32_t)j < MAX_WEAPONS
to prevent a value >= MAX_WEAPONS to be assigned to p->wantweaponfire (it's
used as a weapon index in P_CheckWeapon().
git-svn-id: https://svn.eduke32.com/eduke32@4181 1a8010ca-5511-0410-912e-c29ae57300e0
Because p->scream_voice is an int8_t.
This is an unlikely situation (126 voices ought to be playing simultaneously
while starting the "scream" sound), but still...
git-svn-id: https://svn.eduke32.com/eduke32@4180 1a8010ca-5511-0410-912e-c29ae57300e0
The ones disabled are because they were found to not be used in any mod I
tested. Exposing members directly is rarely good API.
- bool toggle_key_flag -> const uint8_t ... (because value 2 is used)
- make scream_voice, cheat_phase read-only
git-svn-id: https://svn.eduke32.com/eduke32@4179 1a8010ca-5511-0410-912e-c29ae57300e0
Which was especially noticeable in the Lunatic build. Also, use
glPushAttrib/glPopAttrib there.
git-svn-id: https://svn.eduke32.com/eduke32@4176 1a8010ca-5511-0410-912e-c29ae57300e0
This "simply" requires an appropriate factor in the projection matrix.
Also, get rid of a special-case factor for >=1.6 aspects (making HUD models
wider then, I think).
git-svn-id: https://svn.eduke32.com/eduke32@4172 1a8010ca-5511-0410-912e-c29ae57300e0
Known as getactor/sprite[].xpanning from CON, values are 0-255. It should be
assumed that this is only valid for wall-aligned sprites (currently, face
sprites also pan).
A test is provided in lunatic/test/animatesprites.con. It should be run in E1L2
and only with the Lunatic build.
git-svn-id: https://svn.eduke32.com/eduke32@4170 1a8010ca-5511-0410-912e-c29ae57300e0
For sanitizing underwater sections, see r4166.
Also, don't print "Menu function executed successfully" when the function
printed something itself.
git-svn-id: https://svn.eduke32.com/eduke32@4169 1a8010ca-5511-0410-912e-c29ae57300e0
Also, if it were to be reenabled again, use execv() instead of execvp(),
i.e. don't look up $PATH for the executable.
git-svn-id: https://svn.eduke32.com/eduke32@4167 1a8010ca-5511-0410-912e-c29ae57300e0
Likewise for blocking wall sprites. This makes it possible to construct
underwater sections containing complex spritework without losing the
"underwater-ness" when over such sprites, in a backward-compatible way.
Actually, the check is for bit 1 being set, but all other bits should be
considered reserved.
git-svn-id: https://svn.eduke32.com/eduke32@4166 1a8010ca-5511-0410-912e-c29ae57300e0
Add an example searching for all maps containing blocking floor-aligned
sprites in underwater sectors.
git-svn-id: https://svn.eduke32.com/eduke32@4165 1a8010ca-5511-0410-912e-c29ae57300e0
By detecting them in the SDL_KEYDOWN events. This list is getting a bit
ridiculous...
git-svn-id: https://svn.eduke32.com/eduke32@4163 1a8010ca-5511-0410-912e-c29ae57300e0
Compiling a 32-bit NOASM build resulted in code containing a MOVAPS instruction
that accessed a memory location not aligned to 16 bytes (MinGW, GCC 4.8).
git-svn-id: https://svn.eduke32.com/eduke32@4162 1a8010ca-5511-0410-912e-c29ae57300e0
The functions mvlineasm1, mvlineasm4 and tvlineasm2 can now be set to clamp
the vertical texture coordinate (vplc), preventing the unsightly stray lines
on the bottom of non-y-flipped sprites. (The first part of this effort, r3483,
handled their top).
However, this is only enabled for the mvlineasm ones: the vectorized variants
suffered almost no slowdown (even though a PADDUSD SSE instruction would be a
nice thing to have), while it was pretty significant for the sequential
translucent ones.
Summarizing, this leaves two cases where stray lines may appear in the non-ASM
build (the saturation is NYI for a.nasm):
- at the bottom of y-flipped sprites
- at the bottom of translucent sprites (can be toggled by #define)
Another observation is that recent GCC generates much faster code for this
stuff than Clang from SVN.
git-svn-id: https://svn.eduke32.com/eduke32@4161 1a8010ca-5511-0410-912e-c29ae57300e0
For a full 1680x1050 screen drawing a solid/masked wall, the FPS increases
from 118 to 133 and from 114 to 116 (respectively) for me.
Guarded by the macro USE_VECTOR_EXT in the source.
git-svn-id: https://svn.eduke32.com/eduke32@4160 1a8010ca-5511-0410-912e-c29ae57300e0