Now, if more than one sectors are affected, always move them by the same
amount. That is, if one of them would be sticking against the other side,
don't move the rest. Another change consists of determining the z delta
first, and only then moving the sprites by that amount. This fixes the
problem where you'd e.g. raise a 'floor door' against the ceiling, and the
effector sprites would be raised one time too much, preventing them from
being lowered the next time.
git-svn-id: https://svn.eduke32.com/eduke32@2111 1a8010ca-5511-0410-912e-c29ae57300e0
- new mapster32.cfg and OSD variable 'fixmaponsave_sprites', telling the
editor whether to 'fix' the sprite sectnums on saving and entering 3D
mode. Note that a) sprite sectnums are never fixed when 'script_expertmode'
is enabled, as before, and b) sprites that have out-of-bounds sectnums
are still fixed if a proper sector is found
- if saving and some sprite sectnums have thus been tweaked, inform the
mapper on the status line and print the changes in the OSD
- fix update issue similar to an earlier one: when 'saving as', the astub.c-
based file name is now updated too, so saving with Ctrl-S now saves into
the one save with 'save as' (and not the old one)
- don't attempt to recheck wall pointers from scratch (when saving and running
with -check) if it's a TROR map
git-svn-id: https://svn.eduke32.com/eduke32@2110 1a8010ca-5511-0410-912e-c29ae57300e0
Hopefully this fixes the periodic pausing/unpausing that a few people
have been experiencing.
Also fix build with GCC 3.
git-svn-id: https://svn.eduke32.com/eduke32@2108 1a8010ca-5511-0410-912e-c29ae57300e0
with RAND_MAX > 32767 (everything except Windows?). The 'displayrand' command
now returns values from 0 to 32767 inclusive, across all platforms.
git-svn-id: https://svn.eduke32.com/eduke32@2105 1a8010ca-5511-0410-912e-c29ae57300e0
setactorsoundpitch <actor#> <sound#> <pitchoffset>
which can be used to change the pitch of a playing sound.
The pitch offset has the same meaning as the definesound pitch range endpoints,
i.e. the units are 1/100th of a seminote. Note that just like the random pitch
offset, increasing the pitch makes the sound duration shorter (and vice versa).
git-svn-id: https://svn.eduke32.com/eduke32@2104 1a8010ca-5511-0410-912e-c29ae57300e0
member, so maybe not *that* bad) and an invalid memory access when trying to
access a per-player gamevar in a player-less context (e.g. WGR2 SVN r25
WGR2GAME.CON line 10448).
git-svn-id: https://svn.eduke32.com/eduke32@2102 1a8010ca-5511-0410-912e-c29ae57300e0
playback functions. Without these, there would be an uninitialized access
in line 444 of multivoc.c (if the memory in question was allocated with malloc,
but still...)
git-svn-id: https://svn.eduke32.com/eduke32@2101 1a8010ca-5511-0410-912e-c29ae57300e0
and some VoiceNode struct members with a const, commit forgotten vorbis.c
changes.
git-svn-id: https://svn.eduke32.com/eduke32@2100 1a8010ca-5511-0410-912e-c29ae57300e0
last one + this one:
A couple of tweaks against accidental overwriting of maps.
- first, fix a bug where the map name wasn't reset to 'newboard.map' when starting a
new map
- When saving with Ctrl-S, query the user for confirmation and also show the file name
where the map will be written
- when going into the ESC-menu, print the file name where the map will be written
on pressing 'S' above the '(S)ave' text
git-svn-id: https://svn.eduke32.com/eduke32@2096 1a8010ca-5511-0410-912e-c29ae57300e0
Keep in mind that MUSICANDSFXs with ambient sounds must still have lotags
less than 999 because values >=1000 are used for the amount of reverb.
(999 can't be used because the original code reads '< 999' and I'm not
sure whether it has any special significance... probably not though)
git-svn-id: https://svn.eduke32.com/eduke32@2093 1a8010ca-5511-0410-912e-c29ae57300e0
cursor, query the mapper to pick one. The joining can still fail afterwards,
which makes it only a semi-automatic helper feature.
git-svn-id: https://svn.eduke32.com/eduke32@2092 1a8010ca-5511-0410-912e-c29ae57300e0
allowed circle-walls started on the unconstrained _other_ side of a constrained
wall. Also fix a potential invalid wall access when inserting a point (pretty
serious, that!)
git-svn-id: https://svn.eduke32.com/eduke32@2091 1a8010ca-5511-0410-912e-c29ae57300e0
also for make-circle (C, SPACE). There's still a TROR corruption happening
probably when inserting on constrained walls, but I've yet to get behind the
real cause.
git-svn-id: https://svn.eduke32.com/eduke32@2090 1a8010ca-5511-0410-912e-c29ae57300e0
some wall drawing state is ripped out from overheadeditor() into a
a file-scope struct (even if we don't yet need it there). If the deleting
touches the first drawn point, the walls drawn so far are cleared.
git-svn-id: https://svn.eduke32.com/eduke32@2089 1a8010ca-5511-0410-912e-c29ae57300e0
overheadeditor() by allocating temp variables in the blocks where they
are needed.
git-svn-id: https://svn.eduke32.com/eduke32@2088 1a8010ca-5511-0410-912e-c29ae57300e0
- fix arg checking in checkdefs.sh
- some tilenum and quote ID validation in the CON interpreter
- G_DrawDigiNum and friends: eliminate redundant strlen calls
git-svn-id: https://svn.eduke32.com/eduke32@2086 1a8010ca-5511-0410-912e-c29ae57300e0
ATI cards.
From the time of OpenGL initialization, gamma lookup in classic/fullscreen
will be done in software. Before that, always do a setgamma() after setting the
palette, since this is what resets the HW gamma. However, this may lead to
unappealing artifacts with portions of the scene being sent to the screen with
different gammas.
git-svn-id: https://svn.eduke32.com/eduke32@2085 1a8010ca-5511-0410-912e-c29ae57300e0
add it to the 'all' target instead
source/midi.c: eliminate one 'variable set but not used' warning
git-svn-id: https://svn.eduke32.com/eduke32@2084 1a8010ca-5511-0410-912e-c29ae57300e0
maybe replace them with the proper names.
Usage:
checkdefs.sh <some.def> [[<some_dir>] -patch]
<some_dir> is taken to be the base directory of the search path.
-patch uses 'sed -i' to replace the offending findings
git-svn-id: https://svn.eduke32.com/eduke32@2081 1a8010ca-5511-0410-912e-c29ae57300e0
We pack our own copy of glext.h to avoid build breakages on older environments,
and having gl.h include its own was defeating all that.
git-svn-id: https://svn.eduke32.com/eduke32@2080 1a8010ca-5511-0410-912e-c29ae57300e0
fashion. Among other things, this makes the FOV widening when shrunk
work. User CON code should always check the initial viewingrange value
when attempting to do FOV effects like zoom, because it is not guaranteed
to be 65536 due to different screen aspect ratios etc.
git-svn-id: https://svn.eduke32.com/eduke32@2078 1a8010ca-5511-0410-912e-c29ae57300e0
First, when pressing 'S on signed members (like the shade), display
the real signed value instead of the value cast to an unsigned type.
Second, when aiming at an overwall and pressing G, affect the overwall
instead of the wall. Maybe these changes affect a few other queries too...
git-svn-id: https://svn.eduke32.com/eduke32@2077 1a8010ca-5511-0410-912e-c29ae57300e0
ceilings or floors. In such cases, you're not squished unconditionally (instead
of fetching the ceiling or floor height of the neighbor sector), but TROR isn't
meant for small-scale RoR anyway.
git-svn-id: https://svn.eduke32.com/eduke32@2071 1a8010ca-5511-0410-912e-c29ae57300e0
polymer_addlight(). I have no idea whether it's the 'right' thing,
but it fixes this:
Conditional jump or move depends on uninitialised value(s)
at polymer_updatelights (polymer.c:5090)
by polymer_drawrooms (polymer.c:938)
. . .
Uninitialised value was created by a stack allocation
at loadmaphack (engine.c:9482)
Fix another uninitialized access when rendering jpegs.
git-svn-id: https://svn.eduke32.com/eduke32@2069 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes a crash when loading a map afterwards.
Tweak a few debugging messages and some whitespace.
git-svn-id: https://svn.eduke32.com/eduke32@2068 1a8010ca-5511-0410-912e-c29ae57300e0
Also move a 'int16_t editstatus' declaration from polymost.c to engine_priv.h.
git-svn-id: https://svn.eduke32.com/eduke32@2066 1a8010ca-5511-0410-912e-c29ae57300e0
My choice of solution is simply to add an extra set of values duplicating the previous five because doing so would definitely show the user no changes. I could have tinkered with the messy loop where the out-of-bounds references are made but there is no guarantee I could have succeeded or kept compatibility.
git-svn-id: https://svn.eduke32.com/eduke32@2061 1a8010ca-5511-0410-912e-c29ae57300e0
Getting the texture handles without requiring invalidation means we can
handle ART-animating tilenums without impacting performance too much.
git-svn-id: https://svn.eduke32.com/eduke32@2058 1a8010ca-5511-0410-912e-c29ae57300e0
Polymer has a hack that snaps horiz values of spotlights between 90 and 110
to 90 and 110 to avoid triggering aliasing artifacts with perfectly horizontal
spotlights. Propagate that change all the way to the spotlight SE sprite so
that the code won't think that the horiz is always different from the light
and mark it invalid each frame.
git-svn-id: https://svn.eduke32.com/eduke32@2057 1a8010ca-5511-0410-912e-c29ae57300e0
This won't actually do anything until the a debug bit is added when
creating the context, but that requires support for GLX_create_context
which SDL doesn't support. I'll add support for WGL_create_context to
winlayer in a bit as a stopgap.
Also updates our local copy of glext.h with a fresh one from the
Khronos registry.
git-svn-id: https://svn.eduke32.com/eduke32@2056 1a8010ca-5511-0410-912e-c29ae57300e0
We need to Y-invert the projection texcoords when sampling
from the lightmap.
git-svn-id: https://svn.eduke32.com/eduke32@2055 1a8010ca-5511-0410-912e-c29ae57300e0
Sprites would stick with their old material on global palette change.
This goes through all prsprites and clobbers their CRCs so that an
alternate skin / tint / highpal can be applied accordingly.
git-svn-id: https://svn.eduke32.com/eduke32@2053 1a8010ca-5511-0410-912e-c29ae57300e0
The winding order of faces is different if only flipping about X or Y,
and we were unconditionally culling CW faces.
git-svn-id: https://svn.eduke32.com/eduke32@2052 1a8010ca-5511-0410-912e-c29ae57300e0
the nextwall pointers correctly; Add some 'asksave=1' and 'make old-nextwalls
invalid'.
git-svn-id: https://svn.eduke32.com/eduke32@2048 1a8010ca-5511-0410-912e-c29ae57300e0
First, if we're in Polymer, don't precache tinted tiles that have a highpal
for that certain pal. Second, don't precache tiles for palnum 251 (the last
non-reserved one, which is used as a crosshair pal). Assuming that there are
no other tints, this cuts the initial precache time and cache size on disk in
half.
git-svn-id: https://svn.eduke32.com/eduke32@2045 1a8010ca-5511-0410-912e-c29ae57300e0
of the picnums of all sprites, omit the newly inserted sprite itself!
git-svn-id: https://svn.eduke32.com/eduke32@2043 1a8010ca-5511-0410-912e-c29ae57300e0
three individual loops and compile the enclosing function at -O3 (-O1 for
debugging builds). Now, the time for this conversion ranges from 7 to 18
ms per frame across various tested machines, a clear improvement.
git-svn-id: https://svn.eduke32.com/eduke32@2042 1a8010ca-5511-0410-912e-c29ae57300e0
This way, crashlogs will really be appended. Additionally, print a time
at the end of each backtrace.
winlayer.c: load ebacktrace1.dll instead of the old one
Makefile.common: when building with DEBUGANYWAY=1, don't omit frame pointers
This will let us get a stack trace for crashes with the release build code.
git-svn-id: https://svn.eduke32.com/eduke32@2040 1a8010ca-5511-0410-912e-c29ae57300e0
and build our own DLL, now called ebacktrace1.dll. The change consists of
breaking the link to the libintl lib and its dependencies, so the backtrace dll
is now the only one required.
git-svn-id: https://svn.eduke32.com/eduke32@2037 1a8010ca-5511-0410-912e-c29ae57300e0
./configure --disable-vp8-encoder --disable-multithread
Also add VPX/VP8 headers for an easy build on Windows. Throw in the
necessary lines into the Makefile but do not enable VPX support yet.
git-svn-id: https://svn.eduke32.com/eduke32@2036 1a8010ca-5511-0410-912e-c29ae57300e0
- when pasting to walls or maskwalls, the following user bits are kept now:
4 (top/bottom alignment [O])
1+64 (blocking, hitscan)
8+256 (x/y-flip)
- print '(one-sided)' when pressing Shift + ([B] or [H]) on a wall
git-svn-id: https://svn.eduke32.com/eduke32@2033 1a8010ca-5511-0410-912e-c29ae57300e0
Keep track of which side is getting culled, swap around mirrors, swap
around model drawing.
git-svn-id: https://svn.eduke32.com/eduke32@2032 1a8010ca-5511-0410-912e-c29ae57300e0
is picked" but still not perfect. In particular, sometimes a wrong wall is
selected, and sprites don't get picked through portals. As a rule of thumb,
don't be too far away from the objects you're modifying in 3D mode.
git-svn-id: https://svn.eduke32.com/eduke32@2030 1a8010ca-5511-0410-912e-c29ae57300e0
before, and additionally a mode that doesn't clip against masked walls
and sprites.
git-svn-id: https://svn.eduke32.com/eduke32@2028 1a8010ca-5511-0410-912e-c29ae57300e0
uint64_t gethiticks() and gethitickspersec(). For SDL 1.2, the timer
has the same resolution as getticks (1000 Hz). For Windows and SDL 1.3,
the resolution of the underlying perf-timers is used. The only user of
these functions right now is some TROR on-screen debugging code.
Revert an earlier change regarding r_preview_mouseaim. We can't do the
check because editstatus is set later.
git-svn-id: https://svn.eduke32.com/eduke32@2026 1a8010ca-5511-0410-912e-c29ae57300e0
the additional rendering pass
- Remove r_preview_mouseaim cvar from the game, since it's only for Mapster
- sdlmusic.c: (Failed) attempt to fix a call of waitpid() with a non-existent
process ID in the external MIDI playing code. I think there's a race there...
git-svn-id: https://svn.eduke32.com/eduke32@2025 1a8010ca-5511-0410-912e-c29ae57300e0
functionality, Polymost).
The new feature can be enabled/disabled with the 'r_tror_nomaskpass' cvar.
The basic idea is that when drawing lower or upper levels, a first pass
is performed that ignores all red walls for which the TROR nextwall link
'towards' the viewer arrives at a red wall. Thus, in the worst case, there
can be up to twice as many rendering passes now (when it is discovered that
the no-mask-pass isn't different that what would be drawn with the ordinary
one, the latter is skipped, since we've already drawn all needed geometry).
Hovever, this kind of multi-pass splitting is only suitable for simple scenes,
like the upper subway in the TROR test map. In particular, multiple islands
shouldn't 'see' each other.
Two issues are worth mentioning: first, care needs to be taken for translucent
ceilings or floors, since drawing them twice isn't the same as drawing them
once. This is done for classic, but not for Polymost. Second, sprites (which
are always drawn _after_ the geometry for a given pass) are still clipped to
the geometry of the ordinary pass, resulting in their disappearance from
certain angles.
--
Additionaly, a change made it into this commit that fixes redundant collection
of sprites in TROR:classic/Polymost.
git-svn-id: https://svn.eduke32.com/eduke32@2024 1a8010ca-5511-0410-912e-c29ae57300e0
- remove 'imageSize' global which was always yres*bytesperline and only used once
- some clearbuf() -> Bmemset() because I find the latter easier to read
- remove some clearbufs to 0 of some global arrays on init
git-svn-id: https://svn.eduke32.com/eduke32@2023 1a8010ca-5511-0410-912e-c29ae57300e0
always like this now:
ExtUninit -> (writesetup, misc.)
uninitengine -> (uninitsystem -> (uninit timers, mouse, ...))
exit()
Some paths still lead to a plain exit(), like failures in cache1d.c or mdsprite.c
git-svn-id: https://svn.eduke32.com/eduke32@2022 1a8010ca-5511-0410-912e-c29ae57300e0
in any renderer because it's drawn with the software one...
Also add a hack to make Polymer realize that viewscreen tiles can change
each tic so that they don't show a static image anymore.
git-svn-id: https://svn.eduke32.com/eduke32@2021 1a8010ca-5511-0410-912e-c29ae57300e0
with other than base levels, since the y*most arrays are copied there later.
git-svn-id: https://svn.eduke32.com/eduke32@2020 1a8010ca-5511-0410-912e-c29ae57300e0
handled could lead to a bunch whose floors and ceilings covered different
areas. A fix for the reduced functionality arising from this change is
underway.
- Rewrite a small portion of code using yax_vnextsec() in game.c.
git-svn-id: https://svn.eduke32.com/eduke32@2019 1a8010ca-5511-0410-912e-c29ae57300e0
dealing with sectors on the two sides of a bunch. Make yax_globallev and
yax_globalbunch variables non-static.
Rewrite a TROR-related bit in the engine code using the new function.
git-svn-id: https://svn.eduke32.com/eduke32@2018 1a8010ca-5511-0410-912e-c29ae57300e0
palette changed from the last one (either globally or within the last call of
one of the function). This fixes the ugly OSD flickering in 8-bit mode when
a screen tint effect is in action (such as when being hurt or snotted on).
git-svn-id: https://svn.eduke32.com/eduke32@2015 1a8010ca-5511-0410-912e-c29ae57300e0
This will prevent it from calling gltexinvalidateall() when e.g. submerging
and resurfacing, mimicking the behavior of the game, where only
gltexinvalidate8() is called in such situations.
git-svn-id: https://svn.eduke32.com/eduke32@2013 1a8010ca-5511-0410-912e-c29ae57300e0
with 'corruptcheck now', but still print each corrected one on tryfix.
git-svn-id: https://svn.eduke32.com/eduke32@2012 1a8010ca-5511-0410-912e-c29ae57300e0
effects:
1) Mouse turning works with SDL 1.3
2) The mouse pointer can't leave the window area with the console up, so that
focus always stays with the application
3) Menu selection using the mouse doesn't work. Not dramatic IMO.
git-svn-id: https://svn.eduke32.com/eduke32@2011 1a8010ca-5511-0410-912e-c29ae57300e0
is present (like in E4L1). Also sneak in a trivial change in cache1d.c
git-svn-id: https://svn.eduke32.com/eduke32@2010 1a8010ca-5511-0410-912e-c29ae57300e0
fix two issues with signed integer overflow. One is related to clipping
and the other to Polymost mouse-picking for overlong walls. Many more
remain especially in the 8-bit rendering code, but I expect many of
them to be intended.
git-svn-id: https://svn.eduke32.com/eduke32@2009 1a8010ca-5511-0410-912e-c29ae57300e0
is to remove a couple of 'inline's for functions with external linkage, which
seems to be a GCC convenience.
git-svn-id: https://svn.eduke32.com/eduke32@2008 1a8010ca-5511-0410-912e-c29ae57300e0
name into m->head.nam after loading (but before preprocessing for Polymer)
git-svn-id: https://svn.eduke32.com/eduke32@2007 1a8010ca-5511-0410-912e-c29ae57300e0
whenever we change to another renderer etc. and define it for the game and
editor. The purpose of the function is to clean up references to Polymer
resources like lights.
This fixes 1) all lights becoming spot lights in the game and 2)
an issue with maphack lights in the editor (can't recall which exactly).
git-svn-id: https://svn.eduke32.com/eduke32@2006 1a8010ca-5511-0410-912e-c29ae57300e0
Specifically, now also consider the sprite tile's yoffset, and fix an
issue when a tsprite got duplicated 'toward' the viewer. Also add a
couple of tests in trueror1.map.
git-svn-id: https://svn.eduke32.com/eduke32@2004 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the latter also correct when testing a map from the editor.
git-svn-id: https://svn.eduke32.com/eduke32@2001 1a8010ca-5511-0410-912e-c29ae57300e0
With script_expertmode enabled, SHIFT-BACKSPACE clears the upwall link and CTRL-
BACKSPACE the downwall link. These functions are useful because the automatic
nextwall determination code sometimes gets it wrong (not corrupting anything) or
if you want to vertically displace a sector attached to a higher or lower level.
Also add the exploding ceiling example to the TROR test map.
git-svn-id: https://svn.eduke32.com/eduke32@1997 1a8010ca-5511-0410-912e-c29ae57300e0
TROR portals that works with a little help from updatesectorz() (change not visible
from CON code). Relies only on the presence of an extension whose portal isn't
blocked and also plays nicely with corner cases like being shrunk and enabling
the jetpack. This should fix the upward moving platforms in WGR2.
git-svn-id: https://svn.eduke32.com/eduke32@1996 1a8010ca-5511-0410-912e-c29ae57300e0
on the command-line isn't found (instead of saying nothing)
* editor: Move inconsistent (stat&2)/heinum detection into the corruption
checker. This makes a lot of original maps spew countless 'errors', but
it's preferable for new maps since such floors and ceilings could behave
strangely with TROR.
git-svn-id: https://svn.eduke32.com/eduke32@1995 1a8010ca-5511-0410-912e-c29ae57300e0
In cases where performing occlusion queries for multiple red walls
leading to the same sector, we would sometimes leak a number of
query objects. This was apparently harmless on NVIDIA drivers, but
would leak tons of memory on ATI.
git-svn-id: https://svn.eduke32.com/eduke32@1993 1a8010ca-5511-0410-912e-c29ae57300e0
The code was using the Polymer-cached version of the sector cstat to
determine the translucency of its diffuse material, meaning it would
never get it right on the first try; that's what you get for having
completely different variables named 's' and 'sec'.
git-svn-id: https://svn.eduke32.com/eduke32@1991 1a8010ca-5511-0410-912e-c29ae57300e0
We normally enable backface culling always, but turn it off for
two-sided sprites; we need to make sure it's re-enabled after that
as sector masks are drawn after.
git-svn-id: https://svn.eduke32.com/eduke32@1990 1a8010ca-5511-0410-912e-c29ae57300e0
Some of the ROR code was operating under the assumption that drawasks
always correspond to one call of polymer_displarooms(), but that's not
necessarily the case; external view draws all sectors from the top
polymer_drawrooms(), which was causing crashes. Just ignore the sector
mask queues in external view mode, we already don't draw masked walls.
git-svn-id: https://svn.eduke32.com/eduke32@1982 1a8010ca-5511-0410-912e-c29ae57300e0
Check all the bunch siblings if we get a floor/ceiling hit and walk
them if their own planes hit.
git-svn-id: https://svn.eduke32.com/eduke32@1981 1a8010ca-5511-0410-912e-c29ae57300e0
When walking the sectors in displayrooms, detect floor/sector masks to
place them in a mask queue. The queues are allocated on the heap, but
a stack pointer is maintained by the displayrooms to allow it to play
nice with mirror recursion.
Right now the masks are drawn after all of drawmasks is finished; that
means you can see sprites and wall masks through sector masks, but not
the opposite. There is a slight attempt at blending far to near, but
nothing too conclusive yet; that means that in some cases some sector
masks won't be visible through other sector masks, but it should work
for trivial cases.
The next step would be to copy all the drawmasks logic into Polymer
and have it (attempt to) properly interleave sector masks where they
belong in the blending order.
git-svn-id: https://svn.eduke32.com/eduke32@1980 1a8010ca-5511-0410-912e-c29ae57300e0
Previously they would get counted both as 1-way walls for immediate
drawing and as mask walls for delayed drawing.
git-svn-id: https://svn.eduke32.com/eduke32@1979 1a8010ca-5511-0410-912e-c29ae57300e0
Assigns the right alpha value to floor/ceiling planes if their
translucency bits are set and make sure that changing the cstat now
triggers an update of the material for editing purposes.
This doesn't do anything by itself, but will be needed to correctly
draw floor/ceiling masks.
git-svn-id: https://svn.eduke32.com/eduke32@1977 1a8010ca-5511-0410-912e-c29ae57300e0
When walking the sectors, put more drawing work between queuing and
reaping the occlusion queries to potentially make them more efficient.
git-svn-id: https://svn.eduke32.com/eduke32@1976 1a8010ca-5511-0410-912e-c29ae57300e0
Enumerate the vertical siblings of each walked sector and check them
against the current frustum. No occlusion queries yet, but that should
correct any missing sectors until a flaw in that logic is discovered.
git-svn-id: https://svn.eduke32.com/eduke32@1975 1a8010ca-5511-0410-912e-c29ae57300e0
Reorganize polymer.c a bit to match the order of prototypes from the
header, move macros from the middle into the header.
git-svn-id: https://svn.eduke32.com/eduke32@1974 1a8010ca-5511-0410-912e-c29ae57300e0
- fix an earlier 'oops': make highpals load correctly again
- maphack lights shouldn't be double-loaded now
- slight tweak to the loading screen fadein/out timing
- two bound checks
- make some variables static in engine.c
git-svn-id: https://svn.eduke32.com/eduke32@1969 1a8010ca-5511-0410-912e-c29ae57300e0
which switches have been hidden in the original and user maps. One is to make
it face a wall, and another is to 'embed' it in e.g. the floor, like the
monitor with the burning fuse in E4L1. Both kinds show up when the switches
are rendered as models, revealing the secrets that the mapper sought to hide.
My proposal, implemented in this commit, is to apply a heuristic for such
switches at premap and make them invisible (set cstat bit 32768). The
conditions are re-checked during the game in case there is a switch coming
out of the floor, for example. A new spriteext bit is used for this feature.
git-svn-id: https://svn.eduke32.com/eduke32@1968 1a8010ca-5511-0410-912e-c29ae57300e0
The two bugs are:
- RPG projectiles don't pass through water
- can't emerge from slime in bobsp2
* Coalesce Polymer lights that are at the same position for FIRE-like sprites so that only one light is actually generated. This is good for usermaps that have multi-sprite fires, like bobsp2 again.
git-svn-id: https://svn.eduke32.com/eduke32@1967 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes a ridiculous interaction problem between non-black fog and
additive lighting passes. Plagman is stupid.
git-svn-id: https://svn.eduke32.com/eduke32@1965 1a8010ca-5511-0410-912e-c29ae57300e0
* fix 'squishing' when taking off shrunk (the reason was TROR game code using updatesectorz) and a potential sector[-1] access
git-svn-id: https://svn.eduke32.com/eduke32@1960 1a8010ca-5511-0410-912e-c29ae57300e0
by using setspritez() instead of setsprite() for the sectnum updating.
* Change 'yax-nextwall(0/1)' to 'upwall/downwall' in the corruption checker, makes it much nicer to read.
git-svn-id: https://svn.eduke32.com/eduke32@1959 1a8010ca-5511-0410-912e-c29ae57300e0
* make Ctrl-Alt-A (formerly 'toggle inner gray walls') now remove all gray walls entirely in 2d mode
* make r_usenewaspect enabled by default
git-svn-id: https://svn.eduke32.com/eduke32@1957 1a8010ca-5511-0410-912e-c29ae57300e0
* fix breaking out of 'switch' blocks and compilation of the 'default' case
* Have a way of assigning 'special function' menu [' F] entries to script states. Writing a string literal after the state name will register the state under that name. Menu names are limited to 24 characters and it's possible to have up to 16 of them.
* new branching command 'ifinteractive', true if a state runs from the menu mentioned above.
* new command: getnumberfromuser <<retvar>> "query_string" <maxnum> <flags>
See 'state collect_teleporting_sectors' in a.m32 for a combined usage of the new functionality.
git-svn-id: https://svn.eduke32.com/eduke32@1955 1a8010ca-5511-0410-912e-c29ae57300e0
* helper feature: when shade preview is enabled, the ceilings and floors of highlighted sectors are shown in pal 6. This makes it possible to highlight the TROR-joining candidate sectors in 3D mode using e.g. 'sethighlightsector searchsector 1' while aiming at the respective ceilings and floors, and get visual feedback.
* when failing TROR-joining early ('no consistent joining combinations found'), print to the console why it failed.
* more Makefile.deps updating
git-svn-id: https://svn.eduke32.com/eduke32@1952 1a8010ca-5511-0410-912e-c29ae57300e0
* New shade/visibility calculation code, which is activated with 'r_usenewshading' (on by default), and is closer to the classic look. Also tweak the FOGSCALE macro to have approximately the same fog distance with all renderers.
* Mapster32: END modifier to RShift. If it's pressed when RShift is released, sprites which are in grayed out sectors are also selected; Make changing shade affect all highlighted sprites in 3D mode (when aiming at one of them).
* some debug code to watch out for suspicious glGenTexture/glDeleteTextures calls, not active.
git-svn-id: https://svn.eduke32.com/eduke32@1943 1a8010ca-5511-0410-912e-c29ae57300e0
First, it is now possible to disable the memcache (which is there to cache the texcache) by setting the new cvar 'r_memcache' to 0. Do this if you're constrained on memory or getting crashes when e.g. doing vidrestart often. Also, the memcache will disable itself (and free its storage, if it's there) the first time it fails to allocate.
Fix a strcpy with identical arguments in game.c and a couple of uninitialized mem accesses related to Polymer lights.
git-svn-id: https://svn.eduke32.com/eduke32@1941 1a8010ca-5511-0410-912e-c29ae57300e0
The main feature is the addition of -mx and -mh command-line parameters to EDuke32 and Mapster32. These parameters include a con and def "module" respectively. This translates into essentially including the file from the bottom of the compiled script.
I fixed the classic buggy behavior of the BROKEHYDROPLANT and REACTOR2 sprites.
I also fixed a small, long-standing bug where FRAMEEFFECT1 blurs are not affected by sector floorpal. You can see one example of this by shrinking the Enforcer on the upper inside of the toppled building in E3L11: Freeway.
I tweaked the Makefile so that it would automatically regenerate the keep.me files in the $(OBJ) and $(EOBJ) directories after they are deleted for cleaning.
One final change is a slight positioning cleanup of both programs' --help dialog boxes.
git-svn-id: https://svn.eduke32.com/eduke32@1937 1a8010ca-5511-0410-912e-c29ae57300e0
Usage: For an ANM file <somefile>.anm/ANM, EDuke32 looks for <somefile>.ivf, which is the VP8 stream transported by an IVF container. It can be extracted from a WebM file with e.g.
mkvextract tracks <filename>.webm 1:<filename>.ivf
(part of Mkvtoolnix, the Matroska toolset)
Libvpx is required, and the 'YUV'-->RGB conversion is implemented using a fragment shader, so it's for OpenGL modes only. Also, this commit doesn't enable the code.
Unfinished: sound, aspect correction for fullscreen w/ non-square pixels, ... ?
---
Make MAXNODESPERLINE in engine_priv.h actually a macro that depends on MAXYSAVES and MAXDIM instead of using the obsolete precomputed value. I think this might have been the cause for the latest patched-up overhead view crash.
git-svn-id: https://svn.eduke32.com/eduke32@1933 1a8010ca-5511-0410-912e-c29ae57300e0
* Read-only CON access to sector bunchnums by adding the labels '.ceilingbunch' and '.floorbunch' to the CON sector structure
git-svn-id: https://svn.eduke32.com/eduke32@1931 1a8010ca-5511-0410-912e-c29ae57300e0
* slightly tweaked status line, now also displaying the number of bunches
* fix a couple of issues unearthed by valgrind and a TROR nextwall corruption when joining sectors
git-svn-id: https://svn.eduke32.com/eduke32@1930 1a8010ca-5511-0410-912e-c29ae57300e0
* it is now possible to paste (and have an outer red wall automatically) highlighted sectors into a sector that is extended on one side and non-sloped on the other. For this, the highlighted sectors must be in one connected component.
* Make it possible to not display inner gray walls, toggled with Ctrl-Alt-A, but only when no manual grayout (Ctrl-R) is in effect.
* bugfix: don't clear original TROR-nextwall link when duplicating extended highlighted sector
* m32script: protect wall members relevant to TROR
* save autogray (Ctrl-A) and showinnergray (see above) to mapster32.cfg
git-svn-id: https://svn.eduke32.com/eduke32@1928 1a8010ca-5511-0410-912e-c29ae57300e0
- sethighlightsector <sectnum> <on?>
- updatehighlightsector
- collectsectors <<array_to_collect_sectnums>> <initial_sector> <<num_collected_sectors>> <sector_filtering_state>
The latter does a breadth-first search starting from an initial sector and collects nextsectors only when the filtering state, given a sectnum as RETURN input, writes a nonzero value into RETURN. As a usage example, a.m32 includes the state 'collect_teleporting_sectors', that collects all sectors containing an SE7 and highlights them afterwards. This way, it should be possible to retrofit old maps with TROR by distributing small scripts that do most of the work (right now, joining has to be done by hand, though).
* corruption checker: for the 'nextwall inconsistent with nextsector' corruption, suggest an alternative fix by searching fitting nextwalls and changing the nextwall of the corrupt wall (as opposed to the nextsector). It will display with a leading '?' in the listing, and can be demanded by suffixing 'corruptcheck tryfix' with it. For example,
corruptcheck tryfix 9-21 ?
would fix some corruptions in Billy Boy's cranium.map without introducing drawing errors.
* fix demo playback (tueidj figured this out)
git-svn-id: https://svn.eduke32.com/eduke32@1927 1a8010ca-5511-0410-912e-c29ae57300e0
* When dragging highlighted sprites, do a setsprite() after each position update. This way, they won't end up on the wrong level
* TROR support for SE 31 and 32 in-game, example provided in test map
* some uncommited stuff for TROR: SE 6/14
git-svn-id: https://svn.eduke32.com/eduke32@1924 1a8010ca-5511-0410-912e-c29ae57300e0
* Make the minimum resolution possible 640x480. Sometimes you'd accidentally enter something like 'vidmode 800 60' and crashes would ensue...
* fix a warning
git-svn-id: https://svn.eduke32.com/eduke32@1921 1a8010ca-5511-0410-912e-c29ae57300e0
Implementation note: the so instrumented sprites use actor[].t_data[7] to hold a magic number (0x18190000 + pivot spr idx), and t_data[8] and [9] for the initial coords relative to the pivot point.
git-svn-id: https://svn.eduke32.com/eduke32@1913 1a8010ca-5511-0410-912e-c29ae57300e0
* fix memory corruption when loading a Polymer savegame using another renderer and then change to Polymer
* fix possible crash in OSD_Exec() and uninitialized mem access in game config reader
* move makeasmwriteable() to baselayer.c
git-svn-id: https://svn.eduke32.com/eduke32@1910 1a8010ca-5511-0410-912e-c29ae57300e0
"The most noticeable change is the addition of the "includedefault" CON and DEF command, which will attempt to include eduke.con (or nam.con, or ww2gi.con), then game.con, or duke3d.def, or nam.def, or ww2gi.def. This is useful for TCs like my add-ons, where for my pseudo-mutators I currently say "include EDUKE.CON", but I also have to juggle this terrible order of paths, so that I can have an EDUKE.CON file in my HRP which says "include GAME.CON" to allow the mainline game to actually run, but also allow DukePlus to load its EDUKE.CON file (since it uses that and not an -x switch), and also allow any custom EDUKE.CON files in the root to be used."
git-svn-id: https://svn.eduke32.com/eduke32@1909 1a8010ca-5511-0410-912e-c29ae57300e0
* Voxel tweaks: horizontally scale wall-aligned ones by 5/4, make them ignore per-tile yoffset in classic (i.e. emulate Polymost; I think this is more sensible since they're not clipped to floors/ceilings anyway), make Polymost know the voxel scale
* Always cull back-facing, one-sided, wall-aligned sprites (classic/Polymost), irrespective of whether it's a sprite, voxel or model. This can lead to falsely not drawing them in certain circumstances, but IMO that's preferable to visible hidden switches etc.
* Change defaults for r_novoxmips to 1 and lazytileselector to 0
git-svn-id: https://svn.eduke32.com/eduke32@1908 1a8010ca-5511-0410-912e-c29ae57300e0
* When TROR-joining and sectors reachable through former red walls could need displacement, ask the user; if something is wrong with the walls of the two components to join, jump to that place and print coordinates of offending wall and its point2 in the OSD
* Ctrl-TAB in 2D mode now toggles filling of the currently aimed-at sector; it's not very in sync with the rest of the controls though (e.g. some commands will potentially affect each sector that contains the crosshair)
* Fill sectors slightly different so that highlighted sectors above each other are easier to distinguish
* In the editor, always clear the screen to a 'rainbow' of the palette before each frame. This makes no-draw ('HOM') and accidental translucency glitches stand out more clearly
* a few misc. tweaks, consistency checks, and fixes
git-svn-id: https://svn.eduke32.com/eduke32@1901 1a8010ca-5511-0410-912e-c29ae57300e0
* Mapster32 now makes sandwiches, too: select all floors of a bunch and 'extend them below'. This will put a new sector between the highlighted ones and the their lower neighbors and displace the z's accordingly. Make sure you have enough headroom.
* To facilitate the above, RAlt now has two more modifier keys (checked at release time, as usual): for every sector that would be selected, END will select all sectors whose floor bunchnum equals the first (this is useful for sandwiching), and HOME will select all sectors whose ceiling bunchnum equals it (not very useful, but provided for completeness).
* Sloping extended sectors is now checked more rigorously
-- misc:
* When deleting highlighted sectors with DEL, pressing LShift will now always delete them irrespective whether the mouse pointer is over one of them. This is useful for the cleanup of corrupted maps.
* 2D drawing is slightly tweaked so that active walls always display over inactive ones
git-svn-id: https://svn.eduke32.com/eduke32@1900 1a8010ca-5511-0410-912e-c29ae57300e0
game: when entering/leaving water or slime, delay changing palette by one game tic to make it look right
git-svn-id: https://svn.eduke32.com/eduke32@1899 1a8010ca-5511-0410-912e-c29ae57300e0
* rudimentary TROR support
* free mixing of multi- and single-tile pskies
* Don't cull models behind you. That is, treat them like floor sprites in that respect. This way large models like corpses don't disappear from the view unexpectedly.
Classic:
* tweak the last row and column of the translucency table so that e.g. a transparent sprite against a FANSPRITE wall doesn't show up purple (only if Duke3D table is found)
Misc.:
* fixes TROR-nextwall corruption when deleting sectors
* tile selector 'goto' now has also completion
* I forgot a file for the non-OpenGL build last time
git-svn-id: https://svn.eduke32.com/eduke32@1892 1a8010ca-5511-0410-912e-c29ae57300e0
* make it possible to duplicate from extended sectors; all extensions are cleared from them
* lazy hightile loading in tile selector can now be disabled in mapster32.cfg
* fixes USE_OPENGL=0 build
git-svn-id: https://svn.eduke32.com/eduke32@1890 1a8010ca-5511-0410-912e-c29ae57300e0
* more useful auto-red wall feature: if no structure-changing operations have been applied after highlighting and duplicating, now also paste 'visual' fields of outer walls (this is one example of the use of a system that temporarily keeps track of nextwalls for former red lines)
* multi-pkies now have individual parallaxyscale
git-svn-id: https://svn.eduke32.com/eduke32@1886 1a8010ca-5511-0410-912e-c29ae57300e0
* support for free mixing of multi- and single-tile parallaxed skies in classic
* make visibility independent of yxaspect and viewingrange in OpenGL modes
-- editor:
* when dragging walls, restore pixel width after that (only for the left and right walls of pointhighlight, and its nextwalls, if any)
* pasting on walls and auto-aligning them now carries over a few more fields
-- fixes:
* visibility in OpenGL modes wasn't incremented gradually (regression due to making 'clamp' an inline function instead of a macro)
* memory corruption due to calling qlz_compress with less than the recommended surplus storage of 400 bytes
* decorative sprites in the mirror showing non-flipped
* make the subway SE message (much) more helpful by showing which sector the game considers to be the track sector
git-svn-id: https://svn.eduke32.com/eduke32@1882 1a8010ca-5511-0410-912e-c29ae57300e0
* Polymer light access to m32script (light[<lightidx>].<field>). As an application, provide a state 'insertlights' that takes the currently active lights and puts them into the map as SEs (e.g. for maphack recovery).
* Prototype of a mechanism to gray out certain portion of a map, making them inactive to various, but not all, editing operations. Highlighting a set of sectors and pressing Ctrl-R will make the Z bounds be [(least ceiling z), (greatest floor z)] of all selected ones, pressing Ctrl-R when no sectors are highlighted will reset them. Not sure if it's for production use at this stage...
* The 'align walls' feature [.] now has three independently toggleable behaviours: recurse nextwalls (toggled when Ctrl is pressed), iterate point2s (disabled when Shift is pressed), and also copy pixel width (toggled when Alt is pressed).
* Make shades clamp instead of overflowing in the editor
Fixes:
* crash when carrying out certain operations on walls with xrepeat 0
* the Pause key on linux. Also make demo recording start on Shift-ScrollLock because ScrollLock alone is too easily pressed when pausing
git-svn-id: https://svn.eduke32.com/eduke32@1877 1a8010ca-5511-0410-912e-c29ae57300e0
* Tag labeling system for 'link'-type tags, including saving and restoring the tag labels to a separate file '<mapname>.maptags'. Whether a tag is eligible for linking, is determined by a hardcoded (but extensible via m32script) function.
git-svn-id: https://svn.eduke32.com/eduke32@1867 1a8010ca-5511-0410-912e-c29ae57300e0
* Sprite cstat 2048 ('use own shade', [N]) now works more or less. (Issues may arise when combined with sector light effects.)
* Begin work on 'smart' tag labeling system for Mapster32. Right now, it only displays a '+' after tags with linking semantics.
*
git-svn-id: https://svn.eduke32.com/eduke32@1866 1a8010ca-5511-0410-912e-c29ae57300e0