Changed, Classic modes: increased maximum zoom level to 9000% (was 3000%).
Added, General interface: added "800%" zoom level to the bottom toolbar zoom menu.
Added, General interface: added "400%" and "800%" zoom levels to "View -> Zoom" menu.
MAPINFO: added "DoomEdNum" and "SpawnNums" blocks support.
MAPINFO: added "#include" directive support.
MAPINFO: added "$gzdb_skip" special comment support.
DECORATE: "spawnthing" Game Configuration block is now updated using "SpawnID" actor property.
Game configurations: added "class" property to the most of ZDoom things.
Actions: removed "Reload MAPINFO" action.
Documentation: merged "GLDEFS and MODELDEF support", "(Z)MAPINFO support" and "TEXTURES support" topics into "(G)ZDoom text lumps support", added info about the other text lumps GZDB can use.
Added, Visual mode, UDMF: added "Increase Scale" and "Decrease Scale" actions.
Added, Visual mode, UDMF: "Reset Texture Offsets" action now resets scale when used on things.
Added, Visual mode, UDMF: "Reset Local Texture Offsets" action now resets scale, pitch and roll when used on things.
Changed, Visual mode, UDMF: "Reset Texture Offsets" action now only resets texture offsets (previously it also reset texture scale).
Changed, Visual mode, UDMF: "Reset Local Texture Offsets" action now resets texture offsets, scale and brightness of sidedefs and also rotation of floors/ceilings.
Changed, Visual mode, UDMF: thing box arrow now displays pitch and roll for things, which have attached model and appropriate MODELDEF flags.
Changed, Thing Edit Form, UDMF: negative pitch and roll can now be entered.
Updated documentation.
Changed, Numeric textboxes: trailing zeros are no longer displayed to reduce visual noise.
Fixed, paired numeric controls: in some cases culture-specific decimal separator was not used.
Fixed, map loading: inability to initialize D3D device is now handled a bit more gracefully.
Fixed, main toolbar context menu: we should suppress context menu closing only when user clicks on a menu item while holding Shift key.
Fixed, Game configurations: several Skulltag things were not included in many Zandronum game configurations.
Event lines: added event lines for polyobject anchor -> polyobject start spot pairs.
Fixed, Things mode: event lines were not drawn after finishing panning.
Fixed, Visual mode, UDMF: sector geometry cache was not updated after using "Match Brightness" and "Change Brightness" actions on ceilings, so the changes made by them were not visible when using Classic modes in "View Ceiling Textures" mode.
Fixed, Visual mode, UDMF: "Match Brightness" and "Change Brightness" actions set brightness incorrectly in some cases.
Fixed: ACS script names gathering logic was unable to process relative #include and #import paths (like '#import "..\acs\qtilt.acs"').
Updated ZDoom_DECORATE.cfg.
Fixed, long texture names support: in some cases long texture names were not processed correctly when pasting map geometry.
Fixed, Visual mode: in some cases combined sidedef brightness was calculated incorrectly. Also, MAPINFO FadeColor and OutsideFogColor properties are now taken into account.
Hexen_linedefs.cfg: "Door Raise" and "Door Locked Raise" used incorrect enums for "Close Delay".
Moved stuff around a bit in PK3Reader. Will it fix random crashes? I dunno, a least I was no longer able to trigger them...
Recompiled SharpCompress library using VS 2008, so it no longer references .net 4.0 stuff. Will it fix random crashes? See above.
Changed: Thing Browser Form is now resizeable.
Changed: made default Texture Browser Form size smalled, so it properly fits the screen when using low display resolution.
Internal: changed the way apppath is acquired. It should no longer fail when launching the editor from a shared network folder.
Main Form: changed some labels of dynamic light and model rendering selectors to be less confusing.
Updated ZDoom_DECORATE.cfg.
Fixed: PairedFloatControl had incorrect initial link icon.
Internal, AngleControl: rewritten AngleChanged event so it behaves like the rest of custom events.
Updated GZDB icon.
Visual mode: removed "Fit Texture's Width" and "Fit Texture's Height" actions.
Visual mode: "Auto-align texture offsets" actions were incorrectly aligning double-sided middle walls in some cases.
Visual mode: "Auto-align texture offsets" actions now align non-wrapped double-sided middle walls to vertical offset closest to their initial vertical offset.
Visual mode: middle parts of double-sided walls were ignored when Shift-selecting walls.
Nodebuilders/Game configurations: GL nodes definitions were missing from game configurations.
Nodebuilders/Game configurations: "~MAP" wildcard can now be a part of a lump name.
Nodebuilders: GL nodes were not properly handled by the editor.
Main Window: the window is now moved into the view when stored position is ouside of screen bounds.
Classic and Visual modes: changing thing pitch was ignored in some cases.
Visual mode: raising and lowering a thing with "+SPAWNCEILING" flag now works the same way as when raising/lowering a regular thing.
Visual mode: using "Raise/Lower Floor/Ceiling to adjacent sector" actions on a thing with "+SPAWNCEILING" flag now works the same way as when using them on a regular thing.
Rendering: even more fixes to MODELDEF and UDMF properties-related model rendering logic.
Internal, ResourceListEditor: rewritten resource validation check in a more OOP-ish way.
Configurations: fixed an infinite loop crash when a file was trying to include() itself.
UDMF thing flags: added Skill 6-8 to the flags list (because there are thing filters for these).
ZDoom_ACS.cfg: added definitions for SetTeleFog and SwapTeleFog.
ZDoom_DECORATE.cfg: added definitions for A_SetTeleFog and A_SwapTeleFog.
Updated ZDoom ACC.
Updated documentation.
Bit Flags form now changes width to show flags with long names without scrolling.
Bit Flags form: flag numbers are now shown as well as names.
Game configurations: updated Hexen and ZDoom linedef definitions. Now they (hopefully) fully match ZDoom ones.
Action Selector Control: fixed a crash when trying to increase action above maximum value using mouse wheel.
Sector/Linedef/Thing tag lists are now handled by corresponding TypeHandlers (and not by dirty hacks as before).
Linedef info panel: line peggedness labels were obscured by effect label in Doom/Hexen map formats.
Fixed, Texture Browser Form: well, I broke "Tab" key functionality again (in previous commit)...
Maintenance: changed curly braces style to match DB2 one (hopefully not breaking anything in the process...).
Maintenance: changed private method names casing to match DB2 one.
Open Map in Current WAD: resources are now reloaded when current and target map's resources don't match.
Added some boilerplate to UniversalParser and PK3FileImage.
Internal: ImageSelectorControl now has "UsePreviews" property.
Internal: added ConfigurablePictureBox.
Updated ZDoom_DECORATE.cfg.
Thing Edit form: when selection contains more than one thing, thing types form selected category are now randomly applied to it.
Fixed, Thing Edit form: selection change was not processed in some cases.
Changed, Thing Edit form: multi-select mode is now disabled when only one thing is edited.
Internal: different implementation of MultiSelectTreeview (http://sourceforge.net/projects/mstreeview/) is now used.
Fixed, DECORATE parser: error status was not cleared when switching to different resource.
Fixed, DECORATE parser: fixed a parse error when DB2-specific actor properties (like "//$category") were located outside of actor's scope.
Added icons for "Save Screenshot" menu items.
Development: "Save Screenshot (active window)" action will work on a child Form only if it is inherited from DelayedForm.
Renamed "Toggle dynamic lights rendering" action to "Show dynamic lights".
Changed: "Show dynamic lights" action now toggles between available dynamic light rendering modes.
Renamed "Toggle models rendering" action to "Show models".
Changed: "Show models" action now toggles between available model rendering modes.
Removed "Toggle dynamic lights animation" and "Render selected/all models" actions.
Fixed, Randomize Sectors form: selection highlight was not updated after applying the changes when the form was shown in Sectors mode.
Consistency: selection is now cleared after applying changes done in Randomize Things and Randomize Vertices forms.
Fixed, Classic modes: sprites of things with attached models were not rendered when model rendering was disabled.
Updated documentation.
Visual mode: "Lower/Raise Floor/Ceiling" actions now work on surfaces with sector slopes.
Cosmetic: numeric textboxes, which support relative values, now have differently colored text and a tooltip.
Internal: renamed Sector.CeilingSlopeOffset to Sector.CeilSlopeOffset, Sector.CeilingSlope to Sector.CeilSlope to match their names with similar sector properties.
Textures Browser form: PK3/Directory TEXTURES images are now shown in a separate folder in the resources tree.
Fixed, Textures Browser form: fixed a logic error when trying to select initial flat when mix textures & flats was disabled in the current game configuration (this resulted in the blank textures list after opening the form).
Fixed, Textures Browser form: resources tree showed textures count even when browsing flats.
Fixed, Textures Browser form: PK3/Directory textures took precedence even when browsing flats (this means when there were a flat and a texture with the same name, a texture was displayed when browsing flats).
Fixed, Classic modes: actor's scale set in DECORATE was ignored when rendering models.
Fixed, MODELDEF parser: in some cases, several model definitions were skipped when trying to skip the current one.
Fixed, resource management: flat and sprite TEXTURES definitions were loaded only from TEXTURES files named "TEXTURES".
Fixed/added, PK3/folder resource management: patch locations for sprites defined in TEXTURES are now checked the same way as in ZDoom (previously only the "sprites" folder was checked).
Fixed/added, PK3/folder resource management: patch locations for textures defined in TEXTURES are now checked the same way as in ZDoom (previously only the "textures" folder was checked).
Fixed, PK3/folder resource management: flats defined in TEXTURES were not added to the global Flats image list.
Fixed, PK3/folder resource management: in some cases, the image search algorithm could find flats, textures, patches or sprites in incorrect folders (for example, it could find a flat in "flats_backup" folder).
The editor will fail more gracefully when no D3D device is detected.
In some cases the editor was constantly checking D3D device availability when minimized.
Added more DX-related debug output (only in Debug builds).
Map Analysis mode: export to file command will now show "Save File" dialog instead of putting the file in the same folder as the map, also added some boilerplate.
Tag Explorer plugin: save to file command will now show "Save File" dialog instead of putting the file in the same folder as the map, also added some boilerplate.
Internal: reformatted GZCrash.log a bit.
Also, I would like to use this opportunity to thank Siberian Tiger from DTD Team for helping me with SVN builds for more than two years. You made my constant wrestling with the code a much less tedious process.
Internal: UDMF sector slopes and offsets are no longer stored in sector.Fields. Use sector.FloorSlope, sector.FloorSlopeOffset, sector.CeilingSlope and sector.CeilingSlopeOffset.
BCC script compiler (https://github.com/wormt/bcc/) is now bundled with GZDB.
Main Form, "File" menu: only existing files are now added to the "recent files" list.
Thing Edit form, UDMF: default value of pitch and roll angle controls is now up.
Angle control: direction line is not displayed when showing mixed values.
Thing Edit Form, UDMF: added controls for setting pitch, roll, scale, render style, fill color, alpha, health and score.
Visual mode, UDMF: UDMF scale is now applied when rendering sprites.
Added Thing Statistics form (Edit -> View Thing Types...), which shows all loaded thing types with some additional info.
Visual mode: sprites with negative ScaleX and positive ScaleY were not rendered properly.
Classic modes: display was not updated after loading a sprite.
Current testing engine change was not saved on closing the program when no other game configuration settings were changed.
Moved "Rotate Clockwise" and "Rotate Counterclockwise" actions to "Edit" category.
Tag Statistics form: help label was incorrectly aligned.
Some actions in Sectors and Linedefs modes were not used on highlighted map elements.
Some actions in Sectors and Linedefs modes created undo groups incorrectly when used on highlighted map elements.
GLDEFS parser: added a warning when the interval of animated dynamic light is 0.
Visual mode: fixed a crash when an angle of animated dynamic light was set to 0 and light animation was enabled.
Tag explorer: removed unnecessary mode switching when selecting map elements of the same type.
Error Checker mode: added "Check missing flats" check.
Error Checker mode: fixed several descriptions.
Sprite patches for sprites defined in TEXTURES are now loaded from Sprites namespace.
Some of my older texture alignment code didn't work properly when strict texture/flat handling ("mixtextureflats" game configuration flag set to false) was enabled.
Fixed some incorrect checks for missing texture ("-").
Fixed a crash when using "Reload GLDEFS" and "Reload (Z)MAPINFO" actions when GLDEFS / MAPINFO file was moved or renamed after opening the map in the editor.
Draw Curve Mode: added settings panel.
Sectors mode: added "Make Door" button to the toolbar.
Swapped Side panel and Info panel z-order.
Interface: split toolbar into 3 separate toolbars. All toolbar buttons are now viewable at 1024x768.
Interface: grouped stuff in "Modes" menu a bit better.
Interface: added "Draw [stuff]" buttons to modes toolbar.
Interface: reorganized main menu. Hope it makes more sense now.
API: added General.Interface.AddModesButton() and General.Interface.AddModesMenu(), which can be used to add buttons to specific group in "Modes" toolbar and menu items to specific group in "Modes" menu, so actions, which behave like an editing mode, but are not part of one can be added there.
Configurations: all 64 game configuration are now available by default.
Game Configurations window: game configurations can now be disabled. This setting is mostly cosmetic. When a game configuration is disabled, it won't be shown in "game configuration" dropdowns in New\Open Map Options and Map Options windows. If a map's .dbs file specifies a disabled configuration, it will be picked as a map configuration anyway.
Linedefs mode: vertex insert preview logic used Highlight range instead of Stitch range (which is used when draw mode engages).
Visual mode: double-sided middle textures were not selected when using "Select" action with "with same texture" modifier.
Textures: some optimizations in patch blending code.
ZDoom ACS script configuration: added definitions for StrLeft, StrMid and StrRight functions.
When Draw Rectangle or Draw Ellipse mode is enabled, it's settings are now shown in side panel.
Draw Ellipse mode: increased maximum number of sides to 512.
Changed the way tags are shown in Tag Selector controls. Tags without labels are now shown as a number (not "Tag N"), and tags with label are now shown as "N (label)", not "label (N)".
Tag labels are now shown in Thing, Sector and Linedef info panels.
Once again changed the way things are rendered while dragged.
Rearranged the label in PairedIntControl and PairedFieldControl (it is now behind numeric controls).
Optimized MapSet.GetSectorByCoordinates().
Error checks: added "Check unused textures" option.
Replaced MissingTexture3D and UnknownTexture3D.
Sectors mode: restored "Lower/Raise Floor/Ceiling by 8 mp" actions.
Visual mode: in some cases sidedefs were rendered as selected when they were not.
Existing linedefs were not split while drawing new lines in some cases.
Texture and height overrides were not applied correctly in some cases.
Preferences form: "Ctrl+Alt+ScrollUp" and "Ctrl+Alt+ScrollDown" dropdown items were setting the shortcut to "Ctrl+Shift+ScrollUp" and "Ctrl+Shift+ScrollDown".
Visual mode: added "Match Brightness" action.
DECORATE parser: actor names, which contain "+" and "-" symbols, are now parsed correctly.
Fixed an error in lump ranges creation logic.
Cosmetic fixes in various warning/error messages.
Updated documentation.
UDMF map parser should work ~35% faster now.
Texture browser form: keyboard focus was not updated when switching between textures using Tab key.
"Graphics" folder is now checked when searching for texture patches.
Various cosmetic changes here and there.
Info panel was not updated after leaving Visual mode.
Moved hints logic to ClassicMode, so hints can be displayed by any plugin.
Visual mode: dynamic light animation was not working.
Minor performance improvements in Actor, Configuration, UDMF and TEXTURES parsers.
Visual mode: changed "Move Texture Left/Right/Up/Down by 8" actions to "Move Texture Left/Right/Up/Down by cur. grid size"
Visual mode: holding Ctrl-Shift while dragging texture with the mouse will snap texture offsets to current grid size.
Classic modes: interiors of highlighted sectors are now highlighted when the action target of currently highlighted map element is sector.
Unhandeled exceptions infos are now written to the event log.
Angle control (the newer, photoshop-like one): left-clicking inside the control now clamps angle to 45-degree increments. Right-clicking inside the control sets precise angle.
Thing Edit Form: replaced angle control with newer one.
Classic modes: fixed minor rendering artifacts when drawing thing direction arrow.
Location and active tab of all Edit Forms are now stored while GZDB is running.
Focus management between editing window and the rest of the interface should work better now.
Tag Explorer plugin: editing window was not updated properly when Edit forms were opened from Tag Explorer.
Tag Explorer plugin, UDMF: comment editing was incorrectly initialized in some cases.
Visual mode: added support for "fogdensity" and "outsidefogdensity" MAPINFO properties.
Sector Info panel now shows the number of sector's sidedefs as well as light and fade colors (UDMF only).
UDMF: Sector and sidedef flags are now copied/pasted when using "Copy Properties" and "Paste Properties" actions.
Fixed: in some cases default texture overrides were used even when corresponding option was disabled.
Sector Edit form: light and fade values were not saved when a value was pasted/entered into text box.
Sector Edit form: "reset value" button was not shown for light and fade values when selected sectors had different light/fade colors.
Reverted Open Map form changes from previous commit (my assumption that map marker is always empty was not correct...)
Updated documentation.
Snap Map Elements to Grid mode now works much faster and shows a message when completed.
Forced default textures are now only used in drawing modes.
Exception Dialog: long error descriptions were breaking window layout.
Map will no longer be shown in Open Map form if unrelated data is encountered inside of map namespace.
Script editor: pressing "F1" now opens keyword help instead of program manual.
Linedef edit form, Thing edit form: rewritten script support logic. It should now work in the same manner as the rest of controls.
Thing info panel: thing arguments now have proper labels.
Edit forms, UDMF: fields, which are handled by UI, are no longer shown in "Custom" tab.
Visual mode: fixed a crash when loading a model on a video card without Shader model 2.0 support.
Fixed incorrect argument number and changed most of labels in "Cameras and interpolation" section of zdoom_things.cfg.
Visual mode: rendering was broken on video cards without Shader Model 2.0 support.
Engines list was not updated after changing engine in Test button's drop down.
Visual mode: Info/Warning/Error status messages were not displayed properly when nothing was selected.
Sector Edit form, UDMF: Reset and Link buttons were overlapped in Floor/Ceiling scale controls.
Textures now load up to 2x faster when "mix textures and flats" flag is set in game configuration.
TEXTUREx/TEXTURES: texture will now be created if at least one of it's patches is loaded.
Visual mode: fixed a crash when "Slope floor to here" (9500) or "Slope ceiling to here" (9501) things were not inside sector.
Fixed: flats were not loaded form wads inside Directory and PK3/PK7 resources.
Sector Info Panel, Linedef Info Panel: texture size was shown for unknown textures.
Texture scale controls now have "Link" button.
Thing, Sector (UDMF) and Linedef edit forms now work in realtime mode.
Some more fixes in Edit form realtime update stuff.
Removed some unused variables and functions.
Tag Statistics form: you can now double click on Sectors, Linedefs or Things cell to select them, and right click to open their properties.
Texture size labels were displayed incorrectly in some cases.
Rewritten VerticesMode.DeleteItem() once again...
Vertex Edit form now works in realtime mode.
Vertex Edit form: ceiling and floor vertex offsets can now be cleared.
Added StairSectorBuilder plugin (I suppose some external plugins will stop working in GZDB because I've changed ButtonStep to float in ButtonsNumericTextbox a couple revisions ago...).
Preferences form: action description is now scrollable.
Changed background color of Sector Edit form.
Vertex' ZCeiling and ZFloor properties are now managed internally.
Visual mode, UDMF: OffsetX and OffsetY were not properly taken into account in "Fit Texture Width/Height" actions.
UDMF: different Sector Edit Form is now used in UDMF map format.
Some fixes in Linedef edit form.
Added missing icons.
Floor and ceiling textures are now moved more predictably by arrow keys in GZDoom Visual mode.
Walls texture coordinates are always rounded when moved by arrow keys in Visual modes.
Linedef info panel: relative UDMF light values are now shown like this: 16 (128), which means "UDMF light value" ("total surface brightness (UDMF light value + sector brightness)")
Player is now spawned at camera height when testing from current location in Visual modes.
Focus is now properly restored after testing from current location in Visual modes.
Updated Heretic_sectors.cfg and Heretic_things.cfg as described here: http://www.doombuilder.com/forums/viewtopic.php?f=11&t=357
Changed sprites of artifacts in Hexen_things.cfg to proper ones.
Renamed Skulltag configs to Zandronum
UDMF: changing brightness of a wall or ceiling in GZDoom Visual mode will change brightness of selected surface, not sector brightness.
Sector and Sidedef info panels show additional info if a map is in UDMF format.
Fixed: GZDoom menu panel wasn't updated when a map was opened via "recent files" item click.
Event lines for "event activators" (ActorMover, Camera and things with Thing_SetGoal special) are now drawn with different color.
Fixed a crash when a Thing with arguments is pasted in Visual modes.
Several other small fixes.
Fixed config error in ZDoom_things.cfg.
Fixed config error in ZDoom_ACS.cfg
Fixed: inability to change 3d-floor height when control sector is too far away (further than current View distance).
Fixed: "Frame" property wasn't red by MODELDEF parser.
Fixed: PK3 archives are no longer locked when GZDB is running, so you can change their contents without closing the editor.
TEXTURES patches can now be loaded from anywhere inside resource.
Configs: things from "Cameras and Interpolation" and "Boom Items" categories weren't rendered in Visual modes.
Configs: several new icons are now used for things.
Reverted sectors rendering from 1.12b, because it was done in too hackish way and was causing more and more problems. Models rendered height is now 25% lower instead.
Models rendering height can be toggled between normal and 85% in Preferences->Appearance->"Scale models in Visual modes"
Fixed several small bugs here and there.
Things can now be rotated in visual mode.
Added JPG and TGA image format support.
Fixed: TEXTURES files with names other than "textures.ext" will now be loaded (as an example, files named like "textures.something.txt" or "textures_walls.ccp" will be loaded by (G)ZDoom, but not by Doom Builder 2 or previous versions of GZDB).
Fixed: textures defined in TEXTURES have higher priority in (G)ZDoom than images with the same name in "textures" folder.
Fixed another possible crash when MODELDEF is reloaded.
AngleOffset, PitchOffset and RollOffset MODELDEF properties are now supported.
Fixed a crash when editor tries to display a model for an actor without a valid sprite in Visual mode.
Fixed a possible crash when MODELDEF is reloaded from 2d-mode.
Fixed several things in Doom2_things.cfg.
UDMF Controls plugin:
Fixed several bugs in plugin's sliders logic.
GZDoom Builder now uses SharpCompress.dll instead of SharpZip.dll.
Added PK7 archive support.
PK3 archives now load aprox. 40% faster.
Textures browser now shows Folder/PK3/PK7 folder structure.
TextureBrowserForm is now used to display both Textures and Flats.
ACS scripts from #include and #import directives are now shown in Script name/number dropdowns.
Fixed several cases when ACS scripts lists used in Edit Thing and Edit Linedef forms wasn't updated when they should've (i.e. after compiling a script).
Things can now be cut, copied and pasted in Visual modes.
Sector geometry was not updated properly after Undo/Redo in GZDoom Visual mode.
Fixed an error when user selects multiple things and attempts to view their properties in Doom map format.
Added Decorate and Modeldef syntax hilighting, autocompletion and item recognition to Script editor.
Script Editor can now autodetect several script types when you open them (currently ACS, Decorate and Modeldef scripts are recognized).
Tag Explorer: fixed a bug when Tag Explorer update can block keyboard keys release detection logic.
Replaced all doubles with floats.
Script Editor:
Navigator drop-down now updates automatically.
Navigator drop-down now also works for external files.
Added Navigator drop-down support for Decorate and Modeldef.
Enhanced scripting workflow.
Thing and linedef arguments can now have default value in configuration files.
Fixed laggy visual camera movement on systems with big uptime.
Fixed incorrect alignment of Things with "hangs" flag in GZDoom Visual mode.
Fixed Editor crash when nodebuilder fails to build map. A window with error description will be shown instead.
Doom light levels were used even in maps in non-doom map format.
Tag Explorer plugin:
Elements list wasn't updated when map element was deleted.
Pugin wasn't disposed properly, which may led to Doom Builder 2 crash on map close.
Fixed plugin crash after opening another map.
Fixed unresponsive text entry in Filter text box.
Fixed plugin crash when Doom Builder can't determmine thing category ("UNKNOWN" category will be used instead).
Finished Tag Explorer plugin.
Added "ZDBSP - UDMF Normal (no reject)", "ZDBSP - UDMF Normal (zero reject)" and "ZDBSP - Compress nodes (UDMF)" nodebuilder configurations.
Visplane Explorer plugin will show warning message instead of chashing if current map is not in Doom map format.
Fixed a crash when trying to undo sector creation in Visual Modes.
Fixed incorrect colors in Script Editor.
Dynamic lights defined in GLDEFS are now rendered in Visual modes (currently only one light per Thing is supported).
Several values from (Z)MAPINFO are now used in Visual modes.
Added "Reload GLDEFS", "Reload (Z)MAPINFO" and "Reload MODELDEF" menu options (in "Tools" section).
MODELDEF parser now checks which model(s) is/are used in first frame.
Dynamic lights are now created with more meaningful default parameters.
Added errors and warnings indicator to main window.
Fixed incorrect rendering of MD3 models with more than one MD3 Surface.
Fixed a bug introduced in 1.06b when models weren't rendered in Visual mode when Fullbright mode was on.
MODELDEFs and models can now be loaded from PK3 resources (does anybody know if models or MODELDEFs can be stored in WADs?).
Negative scale and zOffset are now correctly parsed from MODELDEFs (model surfaces may be inverted though).
Fixed a crash while reading MODELDEFs when Operation System's decimal separator was set to comma.
Fixed a crash when user changed Thing type in Visual mode to a new one with model override, which wasn't previously used in a map.
Fixed a bug introduced in 1.06 when models weren't rendered in Visual mode when Fullbright mode was on.
Non-breaking space is now correctly handled by all Doom Builder's data parsers.
ColorPicker plugin:
Fixed a crash when user attempted to open ColorPicker window to edit sector properties in Visual mode, using hilighted surface as selection source, without selecting anything before doing so.
Fog rendering (including colored fog in maps in UDMF format).
Fixed lots of bugs in model loading and rendering.
Added "Toggle GZDoom Effects" button, which currently toggles dynamic lights, models and fog rendering.
Model loading process is more verbose now, so if something goes wrong, check Errors and Warnings window (F11) for details.
ColorPicker plugin:
You can now select surfaces in 3D-mode and then open Color Picker window to edit sector colors of sectors, to which these surfaces belong.
If nothing is selected, you can hilight a surface and then open Color Picker window to edit sector colors of sector, to which hilighted surface belongs.
If nothing is selected, you can hilight a Light Thing and then open Color Picker window to edit it's properties.
Added Color Picker plugin
Point, Flicker and Pulse light animation should now look almost exactly as seen in GZDoom.
Fixed a bug when editing thing properties in Visual mode didn't update visual thing.
Fixed incorrect doom-style walls shading when sector has "lightcolor" property set.
Fixed "Index was outside the bounds of the array in CalculateNormalsAndShading()" error.
GZDoomBuilder will now show error message prior to failing.
Added "Dynamic light size" slider, which matches GZDoom's "Light size" option.
Added "Dynamic light intensity" slider, which matches GZDoom's "Light intensity" option.
Fixed Vavoom light rendering (was rendered as additive light, light radius was twise smaller than in GZDoom)
Fixed bug in light rendering introduced in v1.03 (light radius was set to -1 when switching from 2D to 3D mode).
Increased dynamic lights rendering performance (currently I'm getting around 25 FPS in Spawn's MAP01 with 32 dynamic lights and rendering distance set to 3000, was getting 4-6 FPS in GZDoomBuilder 1.02).
Several fixes in animated lights rendering (secondary light radius can now be smaller than primary light radius, Pulse Light's maximum radius was rendered twise bigger than in GZDoom).
All dynamic light types are now rendered correctly.
Added Doom-style shading on walls (walls going from west to east are slightly darker than walls going from north to south)
Masked surfaces are now correctly lit by dynamic lights.
Fixed several bugs in models rendering.
