* Arch-Vile resurrection
* Boom point pushers (due to complete lack of z-handling only for line portals.)
* A_RadiusGive
These also require a more thorough collection of portal groups than simple position checks.
It can easily happen that the lower sector has no lines below the checked area, in which case it would not set the dropoffz correctly. To prevent this, P_LineOpening must, when it checks the opening over a sector portal, actually calculate the dropoff to the lower portal itself by calling sector_t::NextLowestPointAt. It also means that FindRefPoint must calculate a proper reference point when one side of the line to be checked is part of a floor portal.
This fixes Clang complaining about unknown command option '-Wno-unused-but-set-variable' when compiling dumb.
Also I got no new warnings on Clang by excluding '-Wno-unused-result'.
This includes:
* allow one sided portal linedefs to be crossable when part of a polyobject. Due to the limitations, two-sided linedefs won't work here. For general use this is still not allowed because making them passable would require some crippling fudging.
* delay portal finalization until after polyobjects have been spawned.
* the camera interpolation also needs to handle angle differences.
The code is still not 100% complete - the most important thing that is still missing is proper handling of P_CheckPosition through arbitrary portals.
- added portal offsetting to all AproxDistance, AngleTo and Vec*To members of AActor.
- optimized displacement retrieval so that the most common case with no offset retrieves a constant null-vector which can be optimized away fully by the compiler.
- early out in P_GetOffsetPosition if there's no portal lines nearby, so that the common case can skip the traverser completely even on maps with line portals.
- made some minor changes to FPathTraverse so that the Add*Intercepts methods can be virtually overridden.
- removed the PortalTracer class because in its existing form it was too costly. Replaced with a P_GetOffsetPosition function that does the minimum required work to get to the translated destination and that's better suited for being called from the Vec*Offset methods. Other use cases will require some changes to FPathTraverse anyway, or some wrapping class like the FMultiBlock iterators.
- renamed sector_t::soundorg in centerspot, changed the type to a fixedvec2 and removed the CenterSpot #define.
Since this thing was used in lots of places that have nothing to do with sound the name made no sense. Having it as a fixed_t array also made it clumsy to use and the CenterSpot #define used a potentially dangerous type cast.
- Split specific parsing for each intrinsic out of ParseExpression0 and
into their own functions.
- Instead of reserving keywords for intrinsics, identify them by name
within TK_Identifier's handling.
* Blocking lines above or below the current sector should only block if they actually intersect with the currently checking actor.
* Sectors above a ceiling portal should not change current floor information and vice versa.
- Don't use isMissile(). Check directly for the flag at the moment of calling and not the default. Otherwise, things changing themselves will still be ineligible for non-missile checks.
* removed all code for dealing with z-displacing portals in the iterator loops. This would cause too many problems so I decided to scrap any provisions for allowing interactive portals with z-displacement. They will remain restricted to pure teleporter portals.
* changed spechit to carry a position along with the special line. If something is activated through an interactive portal this is needed to calculate movement.
* pass the abovementioned position to CheckForPushSpecial.
* collect touched portal lines in a second array analogous to spechit.
* use FMultiBlockThingsIterator in P_TestMobjZ.
(This is just a safety commit before doing some more extensive behind-the-scenes refactoring.)
Notable changes here:
* use the same logic for determining whether a 3D floor is 'below' or 'above' the actor as all the other functions.
* removed the broken code which tried to detect whether an actor was touching a steep slope. Better use P_LineOpening to find the correct planes and store the results.
* improved detection whether the slopes on both sides of a plane are identical, using the same data as for steep slope detection.
- This is an effort to emphasize that these are just type casts. Now they
look like function-style casts with no action function styling.
They do no magic joojoo at all. The only reason they exist is because
the DECORATE parser can only parse return statements that call a
function, so these satisfy that requirement. i.e. *return int(666);* is
identical to *return 666;* (if the parser could handle the latter).
- Now that state jumps are handled by returning a state, we still need a
way for them to jump to a NULL state. If the parameter processed by this
macro turns out to be NULL, Actor's 'Null' state will be substituted
instead, since that's something that can be jumped to.
Note: This replaces AActor::intersects with a direct calculation. Although that function could be adjusted it'd mean some redundant distance calculations which are easily avoided.
- The FMOD 4.44 linux package contains both 32 and 64-bit versions, with the folder name without the '64' suffix for 64-bit.
- Add minor version '61' so that the latest FMOD package (at the time of this commit) can be detected and compiled successfully.
- some consolidation in p_map.cpp. PIT_CheckLine and PIT_FindFloorCeiling had quite a bit of redundancy which has been merged.
- čontinued work on FMultiBlockLinesIterator. It's still not completely finished.
- This is so that you can call an A_Jump-type function from inside an if
statement and do something other than jump if the jump condition was
met. e.g.
{
if (A_Jump(128, "Foo"))
{
A_Log("The function would have jumped");
}
else
{
A_Log("The function would not have jumped");
}
}
- Since DECORATE's return statement can only return the results of
function calls (I do not want to spend the time necessary to make it
return arbitrary expressions), here are three functions to get around
this limitation:
* A_State - Returns the state passed to it. You can simulate A_Jump
functions with this.
* A_Int - Returns the int passed to it.
* A_Bool - Returns the bool passed to it.
- e.g. If you want to return the number 3, you use this:
return A_Int(3);
If you want to jump to a different state, you use this:
return A_State("SomeState");
- The A_Jump family of action functions now return the state to jump
to (NULL if no jump is to be taken) instead of jumping directly.
It is the caller's responsibility to handle the jump. This will
make it possible to use their results in if statements and
do something other than jump.
- DECORATE return statements can now return the result of a function
(but not any random expression--it must be a function call). To
make a jump happen from inside a multi-action block, you must
return the value of an A_Jump function. e.g.:
{ return A_Jump(128, "SomeState"); }
- The VMFunction class now contains its prototype instead of storing
it at a higher level in PFunction. This is so that
FState::CallAction can easily tell if a function returns a state.
- Removed the FxTailable class because with explicit return
statements, it's not useful anymore.
A big problem with this function was that some flags required setting up some variables before calling it and others did not. It will now set everything up itself so all initializations to AActor::floorz and ceilingz that were made before these calls (which were all identical to begin with) could be removed and the internal initialization logic streamlined.
- removed Plane/Floor/CeilingAtPoint functions because they are overkill for the problem they were meant to solve. Calling ZatPoint with adjusted coordinates created with AActor::PosRelative is just as easy in the few places where this is needed.
- made P_HitWater and P_CheckSplash portal aware.
To summarize, anything that just works with map geometry doesn't need to bother, as does the renderer. (i.e. nearly all r_* files, p_floor.cpp, p_ceiling.cpp et.al)
But all calls that are somehow related to actor positions need to be made aware of potential portal transitions:
* added FloorAtPoint, CeilingAtPoint and PlaneAtPoint methods to sector_t, which can be used to calculate a plane's height with relation to a given actor, even if that actor is on the other side of a portal.
* added HighestCeilingAt and LowestFloorAt methods which traverse all ceiling/floor portals until they find an impassable plane.
* the temporary checking arrays are now static
* the array that gets the returned values only starts allocating memory when the third touched sector group is found. The most common cases (no touched portal and one touched portal) can be handled without accessing the heap.
- did some streamlining of AActor::LinkToSector:
* there's only now version of this function that can handle everything
* moved the FIXMAPTHINGPOS stuff into a separate function.
* removed LinkToWorldForMapThing and put all special handling this function did into P_PointInSectorBuggy.
- improved: If there's an offset mismatch, do not print group numbers as they are utterly meaningless. Instead look for a sector in each group and report those.
- added a copyright notice and some comments to portals.cpp.
This was to resolve some circular dependencies with the portal code.
The most notable changees:
* FTextureID was moved from textures.h to doomtype.h because it is frequently needed in files that don't want to do anything with actual textures.
* split off the parts from p_maputl into a separate header.
* consolidated all blockmap related data into p_blockmap.h
* split off the polyobject parts into po_man.h
* set up linked sector portals so that everything that will eventually have to be considered is present, even though the software renderer currently can't handle those adequately.
* tag all skybox things with a type so that they can easily be distinguished at run time.
* fill in the linked portal types in xlat/eternity.txt.
OpenAL specification doesn't require alcGetIntegerv() to return meaningful values for ALC_MONO_SOURCES and ALC_MONO_SOURCES.
At least Apple's OpenAL implementation returns zeroes, although it can generate reasonable number of sources.
With late resolving it cannot be guaranteed at this point and caused some incorrectly compiled code. Since the cast gets optimized away anyway when not needed there's no point being this selective with applying it.
If done as before, forward-declared classes cannot be found, and the immediate resolving is only needed for constant expressions, so explicitly enabling it in the 4 places where it is needed ensures that those unresolvable expressions remain intact until the final processing pass righr before the code generator is started.
This cuts down on as much message noise as possible, outputs everything to a file specified as a parameter and then quits immediately, allowing this to run from a batch that's supposed to check a larger list of files for errors.
Multiple outputs get appended if the file already exists.
Converting a floating point value that is out of range for a signed integer will result in 0x80000000 with SSE math, which is used exclusively for this purpose on modern Visual C++ compilers, so this cannot be used anywhere.
On ARM there's problems with float to unsigned int conversions.
xs_Float does not depend on these
The first fix missed a second place where this happened and was incomplete.
Anything usable by Dehacked must be VARF_ACTION and VARF_MEMBER in order to work as intended.
- This isn't a real file or even a name, but the game would try and load
it, including running through various permutations, potentially resulting
in loading the current directory as an archive.
Please note that these still require the portal to be set up in the map with Line_SetPortal. It will not create a new portal if none exists on any line with the given ID.
* linked portals may never have a z-offset so the parameter for that needs to be ignored.
* for interactive portals, handling z-displacements when some distance calculation reaches through a portal is way too extensive and problematic to ever have a chance of really working. If such a portal gets defined it will be changed to a teleport-only portal and a message printed.
- store portal data in a separate structure.
- store portal data in savegames because some of this will be changeable later.
- run a cleanup pass after all portals have been created to weed out broken ones.
- add a definition type that's compatible with Eternity Engine's line portal types.
- swapped arg[2] and arg[3] of Line_SetPortal, because the type is more significant than the alignment.
- This might have been added in an effort to fix problems caused by mixing inclusive
and exclusive right edges. It might not be needed anymore. Let's find out...
- did some cleanup on the portal interface on linedefs: All checks should go through isLinePortal (gameplay related) and isVisualPortal (renderer related) which then can decide on the actual data what to return.
- removed portal_passive because it won't survive the upcoming refactoring.
- removed all direct access to portal members of line_t.
- always use the precise (and fast) version of P_PointOnLineSide inside the renderer.
This is to keep some people from jumping the gun on this and preventing the implementation of a proper toggling mechanism.
The feature itself will come back, but differently.
- removed portal setup from Build maps
they don't define it anyway so it makes no sense to have it there. Once this code gets refactored this will be in a different place that's identical for all map types.
- With multiple A_Jump calls possible in a single action now, it is now
possible for DoJump() to be called with a callingstate that does not
match self->state because the state had been changed by a prior A_Jump
in the same action function.
- replace all implicit conversions from FString to const char * in the header files (so that it can be test compiled with the implicit type conversion turned off without throwing thousands of identical errors.)
The function 'PClassActor::InitializeNativeDefault' is the only one which didn't allocate the 'Defaults' member variable with M_Malloc. Reported by the Address Sanitizer.
Latency placement is no longer fixed:
* If time is visible, it is placed on top of the screen and latency is placed below
* If time is not visible, latency is placed on top of the screen
Both are displayed on alternative HUD only
- Somebody might want to set a midtexture's Y scale negative to flip it
vertically. I'm pretty sure this would mess up 3D mid textures if we
don't make it positive again for those.
The reason for this is that on my system, the static or delay loaded method always picks the (obsolete) system-installed OpenAL version (needed for some old games) which is not wanted here if there's another one in the local ZDoom directory.
This also removes the dependency on the broken import library that comes with OpenAL Soft which causes compile errors with more modern MSVC compilers on default settings.
These objects are supposed to be bright, but the standard translations for player do not take this into account, creating dark and/or invisible projectiles depending on the color being used.
The new translation uses hue and saturation from the player color, but combines brightness from the original color with the one for the player in an 8:2 ratio, so that no matter for the player color, these always remain bright and visible.
- Since voxels can have their origin behind the viewer and still have a
portion visible in front of the viewer, they aren't clipped to MINZ like
face sprites are. The 3D floor handling in R_DrawSprite() neglected to
clamp it when recalculating the diminished light colormap.
- Aside, but R_DrawSprite() probably shouldn't be messing with these
properties at all. Why isn't this done in R_ProjectSprite() before it
ever gets to the drawing part?
Independently from OS version the game will enter fullscreen mode when zoom button is clicked
Window zooming behavior introduced in Yosemite is available on all supported versions of OS X
- The original Doom renderer was inclusive for all right edges. This was
fine for the wonky projection it did. This was not fine for a standard
perspective divide, so I had to change walls to be right-edge exclusive
when I changed the projection. I only touched what was needed. Until
now. The right edge is always exclusive now, which should prevent any
more bugs related to mixing the two clusivities incorrectly.
- The flags use TELF_ since DECORATE has an A_Teleport with its
own set of TF_ flags.
- TELF_KEEPVELOCITY is used instead of TELF_HALTVELOCITY, because
there was only one call that ever set bHaltVelocity to false.
According to Blzut3:
The issue happens when the fullscreen resolution is the same as the desktop resolution. In this case WM_DISPLAYCHANGE doesn't occur so the editor never appears. This appears to be fixable by also catching WM_STYLECHANGED since at the very least the window caption will appear/disappear.
- having a value of 5000 as the default for autoaim makes no sense, since this is an angle value that will always be clamped to [0..35]. So now 35 is both the default and the maximum.
- Renamed the 'noabsolute' parameter in side_t::GetLightLevel to 'is3dlight', what it actually is, to avoid the confusion that caused the abovementioned error.
- fixed: The Down2Up render path for sides of 3D floors had the 'is3dlight' check inverted.
These checks had some major issues:
* they calculated incorrect positive values for hitting a ceiling
* the way they used the plane equations made some incorrect assumptions.
* velz has the velocity reduction from bouncing already factored in from the calling code so doing it here again is not necessary.
- Check if a co-op start exists. If not, pick one at random.
- Don't telefrag other players when spawning in co-op games, since
you're allowed to move out of other players now.
Fixing this required adding an external list of active stack objects that the garbage collector can access.
A nice side effect: It's no longer necessary to pass around the stack info to various functions that might end up triggering a garbage collection.
Issues this fixes:
* all original Doom attack functions unconditionally altered the flash state.
* A_FireOldBFG, A_RailAttack and A_Blast never checked for a valid ReadyWeapon.
* CustomInventory items could deplete an unrelated weapon's ammo.
- For grayscale images drawn with the paletted renderer, the value here
was treated as always full range [0,65535]. The max value is actually
determined by the bit depth.
- For RGB images drawn with the paletted renderer, the tRNS chunk was
ignored.
- For grayscale images drawn with the RGB renderer, having a tRNS chunk
present resulted in undefined behavior.
- For RGB images drawn with the RGB renderer, the tRNS chunk was ignored.
The reason for defining them is to be able to fill out the Eternity translation table for GZDoom's Extradata parser.
Most of the new specials are mere specializations of ZDoom's Generic_* functions and occupy positions above 255 to avoid filling up the last remaining free slots available for Hexen format maps.
Allowing action specials greater than 255 required a few changes:
* all access to action specials is now through a small set of access functions.
* Two new PCodes were added to ACC to handle these new specials from scripts.
* a minor change to the network protocol, so netgame and demo version numbers were bumped.
* FS_Execute is now properly defined in p_lnspec.cpp.
Two of the newly added specials - generalizations of the special 'close Door in 30 seconds' and 'raise door in 5 minutes' sector types, will also be available to Hexen format maps. The rest are limited to use in ACS, UDMF and DECORATE.
This also adds 'change' and 'crush' parameters to most Floor_* and Ceiling_* specials, again to match Eternity's feature set.
- Cleared some GCC and Clang warnings. Mostly static analysis false positives, but one of them generated a pretty massive warning in a release build.
- Use -Wno-unused-result since I doubt we're going to address those unless they actually prove to be a problem (and they only appear in release builds).
- SPF_FULLBRIGHT makes the particle full bright.
- SPF_RELATIVE encapsulates the following flags:
- SPF_RELPOS: Position is relative to angle.
- SPF_RELVEL: Velocity is relative to angle.
- SPF_RELACCEL: Acceleration is relative to angle.
- SPF_RELANG: Add caller's angle to angle parameter for relativity.
They were immediately deleted when the associated thinker was destroyed. But this was too early because it missed the final tic of movement, resulting in a visible jump when a moving platform with a player on it came to a halt.
Changed it so that DelRef no longer destroys the interpolation itself. Instead the ::Interpolate method will check if the reference count is 0, and if so and there was no more movement, will then destroy the interpolation.
This ensures that it keeps running until it has interpolated all remaining bits of movement induced by the thinker.
Now moving up a lift is 100% smooth, even with movement interpolation on.
* FInterpolator depended on external references to prevent its content from getting GC'd.
* none of the pointers in the interpolation objects were declared to the GC.
The result of these issues was that changing anything about the life cycle of interpolation objects caused corrupted memory crashes when a level was changed.
- Looking over the code again, I see that discarded SysEx messages can
cause the same issue as unhandled meta events, so generalize the
returning of a NOP for everything.
Note about A_SkelMissile: The direct change of the missile's position was changed to use SetOrigin. If this is later supposed to be portal-aware, such direct coordinate changes are a no-go to ensure that everything is properly maintained.
This contains some advance work for handling line-to-line portals in A_PainShootSkull.
This function is special because it performs a map check itself instead of using one of the common functions from p_map.cpp, like most of the rest of the game code.
This commit is just preparation for upcoming changes to completely encapsulate the coordinate info in AActor because I'm going to have to work with an altered version of actor.h that cannot be committed without breaking the engine.
With this file present in the repo before work is started the changes can be committed piece by piece.
There is no need to close (and thus deallocate) console window explicitly
This will be done by autorelease pool in application controller event loop
OS X with GC and/or ARC was not affected by this issue
Older versions like 10.4 or 10.5 crashed because of double deallocation
Because frac variable has fixed_t type it must be compared with fixed one
Test case: try to break stained glass windows or open door at the beginning of Hexen's MAP01
* since we can trivially decide whether a line crosses the trace behind the end point from checking the return value of P_InterceptVector, there is no need to add those to the list of intercepts as they get discarded anyway in t
* maxfrac is always FRACUNIT so there's no need to waste some variable for a constant value.
* the sight checking code needs to be as precise as possible and should not depend on some old semi-broken routines. (This is more a precision issue of these routines - P_PointOnDivlineSide removes the lower 8 bits of each value - than having an issue with returning the wrong side in some cases.)
* for slope creations it is flat out wrong to use the old routines at all.
* also ignore this in the modern (box-shaped) case of FPathTraverse::AddLineIntercepts. This functionality is new to ZDoom and therefore not subject to compatibility concerns.
* the line-to-line teleporter. It seems the hideous fudging code was just there to work around the design issues of these functions, so let's better not ever call them here in the first place.
* A_PainShootSkull: Its usage here does not depend on these issues.
* P_ExplodeMissile: New code exclusive to ZDoom.
* FPolyObj::CheckMobjBlocking
All occurences in p_map.cpp have been left alone although most of them probably won't need the compatibility option either.
- Envelope data needed to be converted to SF2 values.
- Fine tuning was ignored which made pretty much every instrument off tune.
- Despite this, it still sounds like shit compared to FMOD or Microsoft's
wavetable synth. There are lots of missing notes and some instruments
are still off tune. I'm not sure it's worth trying to salvage it. It'd
probably be better to scrap it, since Timidity is very much oriented
toward GF1 patches, which it handles perfectly fine.
- The missing comma on the first line of dBm_pan_volume's definition
looked suspicious, so I checked the MIDI specification at
http://www.midi.org/techspecs/rp36.php and found the equations
there gave different dB values than were in the table. So I
rebuilt it using the equation given there:
20*log (sin (Pi /2* max(0,CC#10 – 1)/126))
'ceilingterrain' is needed because the top of 3D-floors refers to the model sector's ceiling, so in order to give a 3D floor a terrain it must be assignable to the sector's ceiling.
Note that although it is basically the same property, its actual function bears no relevance to its use in Eternity.
Issues with the old code:
* when calculating friction for a 3D-floor - swimmable or not - the 3D floor's top texture must be used. The previous version always checked the sector's floor texture, even though the top might as well come from the sector's ceiling.
* 3D floors never checked for the SECF_FRICTION flag at all. According to Boom specs, sector-based friction must be ignored if this is the case.
* Terrain based friction had a higher priority than the sector's own value.
Changed the rules as follows:
* if the sector's SECF_FRICTION flag is set (i.e. something explicitly changed the sector's friction), this value is used regardless of terrain settings.
* if this flag is not set, the terrain's friction is used, if defined, using the proper plane for 3D-floors.
* otherwise the default is used.
- Disconnect scripts were previously run at some point after the player
left. Now they are run immediately before destroying the player. Since
the player hasn't actually been destroyed yet, the player also gets to
be the script's activator. This gives you a chance to scrape whatever data
you want from the player before they're history. Note that if you do
anything to make the script wait, the script's activator will become the
world, as it was before.
- The old algorithm is something I threw together that produced decent,
but not spectacular results since it had a tendency to waste space by
forcing everything onto "shelves".
The new packer is the Skyline-MinWaste-WasteMap-BestFirstFit algorithm
described by Jukka Jylanki in his paper *A Thousand Ways to Pack the Bin - A
Practical Approach to Two-Dimensional Rectangle Bin Packing*, which can
currently be read at http://clb.demon.fi/files/RectangleBinPack.pdf
This is minus the optimization to rotate rectangles to make better fits.
The old method had a problem with missing order numbers and aborted the level load and made many assumptions that no longer apply with BSP based polyobject rendering.
- CHF_STOPIFBLOCKED simply prevents the actor from changing directions for movement.
- CHF_DONTTURN implies NORANDOMTURN, NOPOSTATTACKTURN and STOPIFBLOCKED.
- CHF_NORANDOMTURN: Actor will not randomly turn during chasing to pursue its target. It will only turn if it cannot keep moving forward.
- CHF_DONTANGLE: Actor does not adjust its angle to match the movement direction.
- CHF_NOPOSTATTACKTURN: Actor will not make its first turn after exiting its attacks.
- NODISTANCE: Disables distance checking.
- CHECKSIGHT: The qualifying actor must be in sight in order to count.
- SET<TARGET/MASTER/TRACER>: Gets the first qualifying actor and sets the calling actor's specified pointer to it.
- SETONPTR: If the function is being aimed at another actor other than the caller, sets that actor's pointers instead. Requires a SET* flag to work.
- FARTHEST: The actor farthest from the checking actor is set as the pointer. Requires a SET* flag to work.
- CLOSEST: The closest qualifying actor is set as the pointer. Requires a SET* flag to work.
- major overhaul of the static sector damage system:
* consolidated special based damage, Sector_SetDamage and UDMF properties into one set of damage properties. The parallel handling that could lead to double damage infliction was removed. This also means that damage through sector specials can be retroactively changed through Sector_SetDamage.
* all special cases were turned into flags. The new system can switch between Strife's delayed damage and regular damage, and it can also set whether terrain splashes are used or not. It also has access to the special properties of the end-level type (i.e. switching off god mode and ending the level.)
* the damage related flags are accessible through Sector_ChangeFlags, not the damage functions themselves.
Since Eternity got this it's a good candidate for a potential Super-Boom standard, and it's also useful for silencing a sector temporarily without removing the sound sequence.
- moved sector secret information from sector_t::special and secretsector to two flag bits in sector_t::Flags.
This is to get rid of the bit masking madness in the floor/ceiling thinkers which need to preserve this bit when they change a sector's type.
- fixed: Sector_SetPortal's Eternity translation was not correct.
The ZDoom variant allows specifying the plane as part of the portal, Eternity does not. Added a new 'plane' type 3 which just means 'any'.
Native OS X backed didn't center mouse cursor in fullscreen mode with Retina/HiDPI support enabled
Incorrect size of content view led to placement of cursor in upper right corner of the screen upon releasing of mouse capture
When some action is assigned to this corner using system Hot Corners feature, the given action was triggered on acquiring mouse capture
* OPL: specify the core to use for playing this song
* FluidSynth: specify a soundfont that should be used for playing the song.
* WildMidi: specify a config file that should be used for playing the song.
* Timidity++: specify an executable that should be used for playing the song. At least under Windows this allows using Timidity++ with different configs if the executable and each single config are placed in different directories.
* GUS: currently not operational, but should later also specify the config. This will need some work, because right now this is initialized only when the sound system is initialized.
* all other: no function.
These options should mainly be for end users who want to fine-tune how to play the music.
- increased the valid range of patch values for MUS. According to the original MIDI2MUS code it can handle numbers up to 188, not 181, and at least one track from Eternal Doom uses #183.
According to blzut3, it looks like it is a byte followed by a variable length field. It can be any value 0-15 and will be followed by that many bytes one for each bank used. If the bank count is 0 then it is shorthand for using one bank (bank 0).
Based on evidence from several songs in Eternal Doom the description in all known documents is wrong. The instruments are not stored in a 16-bit word but in an 8-bit byte, followed by some variable size data.
Known variations are:
* second byte is 0 - no additional data follows
* second byte is 1 - a third byte for the 'bank' value follows.
The resize indicator overlapped with progress bar and Quit/Cancel button on 10.6 and older versions
OS X 10.7 and newer don't have this indicator at all
- Did anybody actually use this? Use WildMidi instead if you want
something that sounds more like Timidity++ without actually being
Timidity++, since not even the old Timidity manages that.
-- errno.h is required for 'errno';
-- don't use str(n)casecmp and rely on ZDoom CMake handling;
-- add a missing parenthesis around a 'signed char' cast;
-- remove an unneeded GNU_SOURCE redefinition;
-- the non-MSVC side of snd_mididevice was not adapted to the new code, making wildmidi unavailable through the menu.
- Besides being little-endian centric, this bit shifting madness
was unneccessary since the values were already clamped to a 16-bit
range, so all we need to do is cast them to a short.
- In order to use ZDoom's own MIDI sequencer event handling must be
completely separate from mixing, but WildMidi had them intertwined
because it wasn't designed for external sequencers.
- Also remove all 'long's defining the output buffers to avoid having
something that's 32 bits wide on Windows and 64 bits wide on Linux.
The pointless error message in WildMidi_Shutdown was removed to keep the rest of the code simple and allowing to call this even when the device never was used.
Unused high resolution font lumps broke composite font logic
Small font had doubled height because of that, at least alternate HUD and inter-hub text messages had noticeable visual issues
The code assumed that it had access to the texture manager but that gets initialized after MAPINFO, which means that MAPINFO can only store the texture names and let the precaching code resolve the actual textures.
- Checks to see if a certain actor class, in numbers, is close to the actor/pointer via distance, based upon count. Can check for ancestry, disable Z searching, perform less than or equal to instead of greater or equal to, exact counts, check a pointer instead of itself and differentiate between live monsters and dead.
As a side effect this will now allow using custom messages with this function as well by using the arg2 parameter as part of the message's name (arg2=0 will use TXT_COMM0, arg1 TXT_COMM1 and so on.)
- Now includes anglelimit and pitchlimit.
- Anglelimit and pitchlimit only allows the actor to turn this much, similar to A_FaceTarget's limit. FVF_RESETPITCH also respects the pitch limit.
- (offset, anglelimit, pitchlimit, flags, ptr)
- Changes the caller's angle and pitch according to the direction of velocity they're travelling.
- FVF_NOPITCH and FVF_NOANGLE disable changing of pitch/angle respectively and should be counted as mutually exclusive, or the function does nothing.
- FVF_INTERPOLATE - Interpolate's the angle and pitch changes.
- FVF_RESETPITCH will, if there's no z velocity, reset the pitch to 0. Otherwise, the pitch remains unchanged.
The previous version didn't detect some real mistakes in code which used operator& with the wrong flagset (for now 'converted' to the correcly equivalent counterpart, waiting for the proper fix).
- Added 'threshold' and 'defthreshold' to DECORATE expression exposure.
- ChaseThreshold sets the default threshold for how long a monster must chase one target before it can switch targets. Default is 100, must not be negative.
- A_SetChaseThreshold can be used to alter the current or default threshold of an actor <pointer>.
- Changing current threshold has no effect on what the default will be once it hits 0 and something makes it infight with another.
...\src\g_shared\a_randomspawner.cpp(32): warning C4800: 'DWORD' : forcing value to bool 'true' or 'false' (performance warning)
See http://forum.zdoom.org/viewtopic.php?t=49737
- Performs a jump if an actor or a line is in the way.
- Can be used without a jump state if the desire is only to have a pointer change.
- CBF_NOLINES disables jumping if a line is involved.
- CBF_SET* flags set the target, master or tracer to whoever is blocking, for the actor calling the function.
- CBF_SETONPTR causes the pointer changing flags to apply to the pointed actor instead of itself.
- RadiusOffset is a multiplier of the target actor's radius added onto the offsets x and y.
- Pitch is added to the warping actor's current pitch, provided WARPF_USEPITCH is supplied.
- Fixed WARPF_TOFLOOR not working as intended.
- Actors must be this far away to receive items. Mindist must be less than distance.
- Fixed RGF_OBJECTS not discriminating players and monsters from shootable or vulnerable actors.
Now attempt to execute a console command from a script will not terminate its execution
An error message will be issued in the console on every such attempt
