* - Added support for monospacing alignment modes to HUDFont / BaseStatusBar.DrawString
* - added underlying type declaration for EMonospacing
* - replaced "#include v_video.h" with a declaration of EMonospacing
This deprecated CharAt and CharCodeAt for being unsuitable for text processing and in the case of CharCodeAt also for being buggy.
A new replacement, ByteAt has been added that reads a string byte by byte, as well as CodePointCount, which counts the amount of Unicode code points in a string and GetNextCodePoint which reads the string code point by code point.
Note that while this woll work as intended with the currently supported languages as a means to read single characters, there is no guarantee that this will remain so if Unicode support gets extended to things which break the "one code point == one character" assumption.
This was meant for using the VGA font in the alternative HUD but this never went beyond the Kill/Item/Secret display which isn't useful for localization.
Some reorganization to avoid code duplication plus making the log screen capable of using the generic font. This also means that the popup for the log in Strife's status bar will be disabled when in generic mode - this popup with its special font would be a bit problematic.
There are two options here - one only disables the vertical thrust and the other goes back fully to the original non-z-aware code.
Both options are settable through MAPINFO.
For the compatibility presets, the normal ones only disable the vertical thrust, the strict ones force use of the old code entirely.
This was yet another piece of code that essentially was unworkable thanks to the limited screen space with the old bitmap fonts.
With the new font there is enough screen space to do this properly.
This has to be set in the console, the default is still the regular small font. Mainly added because some mods have really hard to read fonts where it is not easy to decipher the numbers.
1. Top-level menu names are now properly handled.
2. Changing "Any or All terms" option now immediately updates the results.
3. Reformatted menu.zs to have tabs instead of spaces.
The most important one is the autosave tagging. This was done because the old printout was missing the year and printed the month as a 3 character English string, sabotaging any attempt to sort the autosaves by anything meaningful.
Parts of this menu suffered badly from lack of screen space to convey the intended information due to the oversized fonts. With the new font this is a lot less problematic (unless using 320x200, of course)
* added a CVAR that sets how localizable graphics need to be dealt with.
* pass the substitution string to OkForLocalization so that proper checks can be performed.
* increased item spacing on Doom's list menus to 18 from 16 pixels, because otherwise the diacritic letters would not fit. 20 would have been more ideal but 18 was the limit without compromising its visual style
* added a second text-only main menu because here the spacing cannot be changed. Doing so would render any single-patch main menu non-functional. So here the rules are that if substitution takes place, it will swap out the entire menu class.
* fixed some issues with the summary screen's "entering" and "finished" graphics.
Passing something non-constant at compile time here is extremely dangerous, especially when users can replace those strings if they like.
It now uses FString::Substitute in all cases where something needs to be inserted into a template string.
* entering a savegame description did not work anymore
* the length check was too restrictive and always underestimated the available space
* use the console font for entering a savegame description. This has more characters and better contrast for this content.
* the interface to the text enterer used bad measurements.
For the Doom IWADs the provided font looks almost identical to the characters used on the title patches. So, for any level name that got replaced in some language, it will now check if the retrieved name comes from the default table, and if not, ignore the title patch and print the name with the specified font.
This also required removing the 'en' label from the default table, because with this present, the text would always be picked from 'en' instead of 'default'. Since 'en' and 'default' had the same contents, in any English locale the 'default' table was never hit, so this won't make any difference for the texts being chosen.
Last but not least, wminfo has been made a local variable in G_DoCompleted. There were two places where this was accessed from outside the summary screen or its setup code, and both were incorrect.
This was broken by several small unicode-incompatible code fragments.
This commit also removes the input limit for the player name and the savegame description. With multibyte encoding, limiting them to a fixed length did not work right.
Currently these will just overflow the fields if the text becomes too long, this needs some additional work.
The script side cannot do anything useful with this, because most actions require parameters in global variables, so this is a first grade candidate for rogue mods to make the engine misbehave.
One sector in an underwater area of KDIZD Z1M3 got tagged with an incorrect Transfer_Heights effect which caused render glitches in that area.
There were also a few AddSectorTag calls without first clearing the sector's tags leading to potentially undefined behavior.
The text file
gzdoom/wadsrc/static/zscript/statscreen/statscreen.txt
is set to use strings called “$ENTERING” and “$FINISHED”, located in the language files, in intermission screens between levels in Heretic. However, these strings are named incorrectly in the language files, instead being written as “$WI_ENTERING” and “$WI_FINISHED” for some reason I’m unaware of. After renaming the original script, the ingame text shows up through what is written in the language files, as intended.
On a miscellaneous note: in GZDoom, the text between levels in Heretic says “Entering:”. In the DOS version, it says “Now entering:”. This is accurately reflected in the English language file, though, and thus faithful to the original when displayed ingame.
currentUILevel is now primaryLevel.
For ZScript, currentVMLevel was added. This is also exported as 'level' and will change as needed.
This also means that no breaking deprecations will be needed in the future, because in order to sandbox a level only 4 variables need to be handled: level, players, playeringame and consoleplayer.
The remaining global variables are not relevant for the level state.
The static 'level' has been mostly removed from the code except some places that still need work.
- Allows defining of what actor is replacing another for information.
- If multiple arachnotrons, a modder can attribute them as being a replacer of Arachnotron itself, allowing A_BossDeath and GetReplacee to work with it.
This was always used with 'consoleplayer' which really is the only thing making sense here. But this is a part of the global state which should be avoided in play code.
In particular, this makes no real sense in case of secondary maps where it should always return false.
All these required access to the sector's Level reference.
The remaining references to the global 'level' variable are all in deprecated functions which is ok.
LevelLocals on the left side of.a function call will now always be remapped to 'Level', which will either remap to the same-named instance variable or the global deprecated one.
In a few degenerate cases where there is a conflicting local variable named 'level' it may error out but that is unavoidable here but this is very unlikely.
This had two different flags that were checked totally inconsistently, and one was not even saved.
Moved everything into a few subfunctions so that these checks do not have to be scattered all over the code.
UI always runs on the primary level, so this does not need the ability to operate on multiple levels. Additionally, this can later be set to null when running play code so that scope violations result in an abort.
When player is picked up item that does morph, the corresponding toucher actor is changed in process
Previously, morhing item was removed from original actor leaving player's inventory in inconsistent state
https://forum.zdoom.org/viewtopic.php?t=63124
Unlike the other classes, the places where variables from this class were accessed were quite scattered so there isn't much scriptified code. Instead, most of these places are now using the script variable access methods.
This was the last remaining subclass of AActor, meaning that class Actor can now be opened for user-side extensions.
This was the only code using the ViewBob member variable.
This also moves the range check for this variable to its application, because a badly behaved mod can just as easily change it at run time instead of just setting an absurdly large value in the class definition.
The current behaviour offsets to the front of the actor rather than the side, due to an oversight in the code, which oddly is not present in the A_FireBullets equivalent.
This should be less of a drag on the playsim than having each light a separate actor. A quick check with ZDCMP2 showed that the light processing time was reduced to 1/3rd from 0.5 ms to 0.17 ms per tic.
It's also one native actor class less.
The loop never checked if the item was still valid and would continue to try to use it, even after it was removed from the inventory and destroyed.
As native code this just failed silently, but with the VM it needs to be explicitly checked.
Add 'useowncoloradd_{top,mid,bottom}' sidedef properties to the UDMF
spec
Only use side's additive colors if 'useowncoloradd_(top|mid|bottom)' is
set.
Rename UseOwnColors flag to UseOwnSpecialColors
Add UseOwnAdditiveColor flag to side_t::part
Add EnableAdditiveColor to side_t
Add Side.EnableAdditiveColor to ZScript API
Sector.SetAdditiveColor actually called Sector.SetSpecialColor
Add use boolean property, used to determine whether or not to override the sector's additive wall colour with the side's additive colour.
The new specification is more flexible, and allows assigning additive
colors to individual parts of a sector (walls, sprites, flats) and even
individual parts of a side (top, middle, bottom)
Add AdditiveColors arrays to sector_t and side_t::part
Initialize AdditiveColors arrays to 0
Export AdditiveColors to ZScript
Save AdditiveColors in saved game files
Use colors from AdditiveColors arrays when setting the additive color
for the render state
Add code to parse the new UDMF additive color properties
Remove additive color slot from sector color/part enum
Add SetAdditiveColor to sector_t and side_t
Add GetAdditiveColor to side_t
Export new methods and additive color arrays to ZScript
Rename ColorAdd to AddColor
Add AddColor to FRenderState
Tweak SpecialColors array in ZScript to include the additive color
Add uAddColor to the shader compiler
Add uAddColor to the texel
- TriggerPainChance(Name mod, bool forcedPain)
- One exception: PainThrehold is only checked in ReactToDamage, since this function does not require checking damage amount.
Unlike everything else from the IWADs this had to use the 'light' keyword in ZScript because this is merely a base class for many others and the light definitions here need to be inheritable.
Many uses of random() & value have been turned into random(0, value).
This is not only more efficient, it also ensures better random distribution because the parameter-less variant only returns values between 0 and 255.
This was done to make reviewing easier, again because it is virtually impossible to search for the operators in the code.
Going through this revealed quite a few places where texture animations were on but shouldn't and even more places that did not check PASLVERS, although they were preparing some paletted rendering.
Considering that the physical texture size should be abstracted away from modding this needs to be done differently.
Doing any calculations with physical texture sizes on the mod side is only going to cause errors so this had been changed to always return scaled size.
- disallow bool as a return value for direct native calls because it only sets the lowest 8 bits of the return register.
- changed return type for several functions from bool to int where the return type was the only thing blocking use as direct native call.
This was the last bit of code standing in the way of making AInventory a fully scripted class.
All that's left to sort out is some variable accesses - the vast majority of them in SBARINFO.
- moved the ALTHUDCF parser PClass::StaticInit, so that it gets done right after creating the actor definitions.
All left to do is not to reallocate the AltHud object for each frame but store it in a better suited place.
Instead of overriding the Massacre method it is preferable to clear the flags causing the bad behavior, most notably ISMONSTER.
# Conflicts:
# src/g_inventory/a_pickups.cpp
# src/g_inventory/a_pickups.h
Now a child type can decide for itself how to treat 'amount'.
The scripting interfaces to this function in ACS and FraggleScript have been consolidated and also scriptified.
- offloaded key list generation for alternative HUD to non-UI parts.
This change also revealed a problem with handling empty sprites in the key list so this got fixed, too.
Overriding this would make the engine vulnerable to badly behaving mods. Intercepting this and altering the behavior can render the entire game inoperable, especially if more internal code gets scriptified later. So even at the risk of breaking some carelsss mods this must be blocked.
This was by far the largest block of native virtuals, and they were only native to be able to allow checking if the event was implemented for the current handler. This can easily be done by looking at the byte code, just like VMCall also does but in turn it removes more than half of the existing native virtuals from the interface.
It has been like this initially but was changed when ZDoom gained an overly complicated polymorphic class descriptor object that required a lot of support code. All these complications have long been removed but these methods remained. Since they prevent a class from being moved to the script side entirely they had to be removed.
This was the last major blocker to make Weapon a purely scripted class, the only remaining native method is Serialize which is of no concern for the coming work.
This stuff is now kept locally in the bot code so that it doesn't infest the rest of the engine.
And please don't read the new botsupp.txt file as some new means to configure bots! This was merely done to get this data out of the way.
The bots are still broken beyond repair and virtually unusable, even if proper data is provided for all weapons.
In both cases, having this flag on will render the monster-backing-off-check for melee attacks ineffective because it would misinterpret these weapons as close range only - which they aren't. Even for the PhoenixRod the range is longer than what gets checked here.
As a consequence, the bot's check for missile shooting melee weapons has also become pointless because no such weapon is defined anymore.
Currently used for loading parameters into registers.
For checking parameters of native functions some more work is needed to get the info to the function. Currently it doesn't receive the function descriptor.
This allows retaining the functionality, even if for the JIT compiler's benefit all default arguments are pushed onto the stack instead of reading them from the defaults array.
- Works similarly to CanCollideWith.
- Passive means the caller is trying to be resurrected by 'other'.
- Non-passive means the caller is trying to resurrect 'other'.
- Added a function to the Actor class to get its spawn time relative to the current level.
- Added spawn time information to the output of the "info" console command.
- Uses the same code as Thing_ProjectileIntercept to aim and move the projectile.
- targ: The actor the caller will aim at.
- speed: Used for calculating the new angle/pitch and adjusts the speed accordingly. Default is -1 (current speed).
- aimpitch: If true, aims the pitch in the travelling direction. Default is true.
- oldvel: If true, does not replace the velocity with the specified speed. Default is false.
- Split the code from Thing_ProjectileIntercept and have that function call VelIntercept.
This is by no means perfect and looks different than what was originally intended, but at least this doesn't totally fail to render properly with the OpenGL renderer.
