currentUILevel is now primaryLevel.
For ZScript, currentVMLevel was added. This is also exported as 'level' and will change as needed.
This also means that no breaking deprecations will be needed in the future, because in order to sandbox a level only 4 variables need to be handled: level, players, playeringame and consoleplayer.
The remaining global variables are not relevant for the level state.
The static 'level' has been mostly removed from the code except some places that still need work.
- Allows defining of what actor is replacing another for information.
- If multiple arachnotrons, a modder can attribute them as being a replacer of Arachnotron itself, allowing A_BossDeath and GetReplacee to work with it.
This was always used with 'consoleplayer' which really is the only thing making sense here. But this is a part of the global state which should be avoided in play code.
In particular, this makes no real sense in case of secondary maps where it should always return false.
All these required access to the sector's Level reference.
The remaining references to the global 'level' variable are all in deprecated functions which is ok.
LevelLocals on the left side of.a function call will now always be remapped to 'Level', which will either remap to the same-named instance variable or the global deprecated one.
In a few degenerate cases where there is a conflicting local variable named 'level' it may error out but that is unavoidable here but this is very unlikely.
This had two different flags that were checked totally inconsistently, and one was not even saved.
Moved everything into a few subfunctions so that these checks do not have to be scattered all over the code.
UI always runs on the primary level, so this does not need the ability to operate on multiple levels. Additionally, this can later be set to null when running play code so that scope violations result in an abort.
When player is picked up item that does morph, the corresponding toucher actor is changed in process
Previously, morhing item was removed from original actor leaving player's inventory in inconsistent state
https://forum.zdoom.org/viewtopic.php?t=63124
- upload only the dynamic AABB subtree using glBufferSubData
- change internal raytracing stack limit from 16 to 32
- update shadowmap AABB tree after R_SetupFrame for proper frame interpolation
Unlike the other classes, the places where variables from this class were accessed were quite scattered so there isn't much scriptified code. Instead, most of these places are now using the script variable access methods.
This was the last remaining subclass of AActor, meaning that class Actor can now be opened for user-side extensions.
This was the only code using the ViewBob member variable.
This also moves the range check for this variable to its application, because a badly behaved mod can just as easily change it at run time instead of just setting an absurdly large value in the class definition.
The current behaviour offsets to the front of the actor rather than the side, due to an oversight in the code, which oddly is not present in the A_FireBullets equivalent.
This should be less of a drag on the playsim than having each light a separate actor. A quick check with ZDCMP2 showed that the light processing time was reduced to 1/3rd from 0.5 ms to 0.17 ms per tic.
It's also one native actor class less.
The loop never checked if the item was still valid and would continue to try to use it, even after it was removed from the inventory and destroyed.
As native code this just failed silently, but with the VM it needs to be explicitly checked.
Add 'useowncoloradd_{top,mid,bottom}' sidedef properties to the UDMF
spec
Only use side's additive colors if 'useowncoloradd_(top|mid|bottom)' is
set.
Rename UseOwnColors flag to UseOwnSpecialColors
Add UseOwnAdditiveColor flag to side_t::part
Add EnableAdditiveColor to side_t
Add Side.EnableAdditiveColor to ZScript API
Sector.SetAdditiveColor actually called Sector.SetSpecialColor
Add use boolean property, used to determine whether or not to override the sector's additive wall colour with the side's additive colour.
The new specification is more flexible, and allows assigning additive
colors to individual parts of a sector (walls, sprites, flats) and even
individual parts of a side (top, middle, bottom)
Add AdditiveColors arrays to sector_t and side_t::part
Initialize AdditiveColors arrays to 0
Export AdditiveColors to ZScript
Save AdditiveColors in saved game files
Use colors from AdditiveColors arrays when setting the additive color
for the render state
Add code to parse the new UDMF additive color properties
Remove additive color slot from sector color/part enum
Add SetAdditiveColor to sector_t and side_t
Add GetAdditiveColor to side_t
Export new methods and additive color arrays to ZScript
Rename ColorAdd to AddColor
Add AddColor to FRenderState
Tweak SpecialColors array in ZScript to include the additive color
Add uAddColor to the shader compiler
Add uAddColor to the texel
- TriggerPainChance(Name mod, bool forcedPain)
- One exception: PainThrehold is only checked in ReactToDamage, since this function does not require checking damage amount.
Unlike everything else from the IWADs this had to use the 'light' keyword in ZScript because this is merely a base class for many others and the light definitions here need to be inheritable.
Many uses of random() & value have been turned into random(0, value).
This is not only more efficient, it also ensures better random distribution because the parameter-less variant only returns values between 0 and 255.
This was done to make reviewing easier, again because it is virtually impossible to search for the operators in the code.
Going through this revealed quite a few places where texture animations were on but shouldn't and even more places that did not check PASLVERS, although they were preparing some paletted rendering.
Considering that the physical texture size should be abstracted away from modding this needs to be done differently.
Doing any calculations with physical texture sizes on the mod side is only going to cause errors so this had been changed to always return scaled size.
- disallow bool as a return value for direct native calls because it only sets the lowest 8 bits of the return register.
- changed return type for several functions from bool to int where the return type was the only thing blocking use as direct native call.
This was the last bit of code standing in the way of making AInventory a fully scripted class.
All that's left to sort out is some variable accesses - the vast majority of them in SBARINFO.
- moved the ALTHUDCF parser PClass::StaticInit, so that it gets done right after creating the actor definitions.
All left to do is not to reallocate the AltHud object for each frame but store it in a better suited place.
Instead of overriding the Massacre method it is preferable to clear the flags causing the bad behavior, most notably ISMONSTER.
# Conflicts:
# src/g_inventory/a_pickups.cpp
# src/g_inventory/a_pickups.h
Now a child type can decide for itself how to treat 'amount'.
The scripting interfaces to this function in ACS and FraggleScript have been consolidated and also scriptified.
- offloaded key list generation for alternative HUD to non-UI parts.
This change also revealed a problem with handling empty sprites in the key list so this got fixed, too.
There were still some leftover definitions from FMod and far too many things were at the top level. Anything non-essential has been moved to the "Advanced Sound Options" submenu and the pointless sound backend switch has been removed entirely.
Overriding this would make the engine vulnerable to badly behaving mods. Intercepting this and altering the behavior can render the entire game inoperable, especially if more internal code gets scriptified later. So even at the risk of breaking some carelsss mods this must be blocked.
This was by far the largest block of native virtuals, and they were only native to be able to allow checking if the event was implemented for the current handler. This can easily be done by looking at the byte code, just like VMCall also does but in turn it removes more than half of the existing native virtuals from the interface.
It has been like this initially but was changed when ZDoom gained an overly complicated polymorphic class descriptor object that required a lot of support code. All these complications have long been removed but these methods remained. Since they prevent a class from being moved to the script side entirely they had to be removed.
This was the last major blocker to make Weapon a purely scripted class, the only remaining native method is Serialize which is of no concern for the coming work.
This stuff is now kept locally in the bot code so that it doesn't infest the rest of the engine.
And please don't read the new botsupp.txt file as some new means to configure bots! This was merely done to get this data out of the way.
The bots are still broken beyond repair and virtually unusable, even if proper data is provided for all weapons.
In both cases, having this flag on will render the monster-backing-off-check for melee attacks ineffective because it would misinterpret these weapons as close range only - which they aren't. Even for the PhoenixRod the range is longer than what gets checked here.
As a consequence, the bot's check for missile shooting melee weapons has also become pointless because no such weapon is defined anymore.
Currently used for loading parameters into registers.
For checking parameters of native functions some more work is needed to get the info to the function. Currently it doesn't receive the function descriptor.
This allows retaining the functionality, even if for the JIT compiler's benefit all default arguments are pushed onto the stack instead of reading them from the defaults array.
- Works similarly to CanCollideWith.
- Passive means the caller is trying to be resurrected by 'other'.
- Non-passive means the caller is trying to resurrect 'other'.
* Colors can npw be defined per sidedef, not only per sector.
* Gradients can be selectively disabled or vertically flipped per wall tier.
* Gradients can be clamped to their respective tier, i.e top and bottom of the tier, not the front sector defines where it starts.
The per-wall colors are implemented for hardware and softpoly renderer only, but not for the classic software renderer, because its code is far too scattered to do this efficiently.
- Added a function to the Actor class to get its spawn time relative to the current level.
- Added spawn time information to the output of the "info" console command.
- Uses the same code as Thing_ProjectileIntercept to aim and move the projectile.
- targ: The actor the caller will aim at.
- speed: Used for calculating the new angle/pitch and adjusts the speed accordingly. Default is -1 (current speed).
- aimpitch: If true, aims the pitch in the travelling direction. Default is true.
- oldvel: If true, does not replace the velocity with the specified speed. Default is false.
- Split the code from Thing_ProjectileIntercept and have that function call VelIntercept.
This is by no means perfect and looks different than what was originally intended, but at least this doesn't totally fail to render properly with the OpenGL renderer.
Added full-panning stereo, improvement of channel management, and many other things.
Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes.
To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback.
ADLMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Fixed correctness of CMF files playing
* Fixed unnecessary overuse of chip channels by blank notes
* Added API to disable specific MIDI tracks or play one of MIDI tracks solo
* Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits.
* Added working implementation of TMB's velocity offset
* Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!)
* Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip
OPNMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels
* Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis
* Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip
* Added support for full-panning stereo option
ADL&OPN Hotfix: re-calculated default banks
The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
Although this doesn't look as good as the PCF version it is a lot less calculation intensive and therefore more suitable for weaker hardware.
It also tends to bleed through walls a lot less.
These were caused by some bogus comment in the original compatibility.txt which erroneously added a "SPAC_PCross" remark to a line which actually set "SPAC_Cross".
RIndexOf returns the index where the substring starts, instead of the index where the substring ends - 1.
Deprecate the LastIndexOf method of StringStruct
These methods do not examine or change playsim state. They only perform math or look at class metadata.
Methods changed are:
• deltaangle
• absangle
• AngleToVector
• RotateVector
• Normalize180
• BobSin
• GetDefaultSpeed
• FindState
• GetDropItems (which changes the scope of the returned struct, but the returned struct is all-readonly anyway)
This reverts commit 8c7d3b6ab8.
With DTA_LegacyRenderStyle being added there is no pressing need for this. Aside from that there's an utterly unhealthy amount of information duplication here and it is missing some more recent additions.
The problem here is that this affects the public scripting interface so it cannot be committed to master without further adjustments.
# Conflicts:
# src/p_interaction.cpp
- new ccmd: vid_setscale <x> <y> [linear] [fake-mcga-4:3] - sets vid_scalemode to 5 with the absolute scaling parameters. example: vid_scalemode 800 600 allows you to see the screen (stretched) as if it were 800x600. Linear specifies whether to force the scaling to be linear in this mode, and "fake-mcga-4:3" is meant for 320x200-like modes that mimic mode13h scaling.
This was done because the backdrop as implemented was the only texture in the entire game that had to be deleted and recreated each frame.
However, with Vulkan this would have necessitated quite a bit of synchronization with the render pipeline which wasn't really feasible just for this one single texture.
Now the texture manager can assume that once a texture was created it will be immutable and never has to change.
MAP07 - Dropping onto the outdoor lava will now raise triangle sectors.
Should be impossible to get stuck in them now.
MAP08 - Fix (what I presume to be an unintentional) missing texture.
With this, one can use its self-replacement code (which copies a bunch of its state into the replacement actor, and monitors for boss death if appropriate), but select the replacement class based on some other criteria (map number, the player's RPG stats, the player's class, etc).
Previously, a RandomSpawner with infinite recursion would hang the game, because the recursion check was happening before the recursion counter (bouncecount) was set.
Why? So mods that reveal enemy names don't show internal monster class names.
Tags are based on language.enu lump:
- Tags for Doom/Doom 2 monsters are referring directly to CC_* strings.
- Tags for Heretic monsters are based on obituaries.
- All tags match corresponding obituaries.
Added ability to switch emulator and it's accuracy level ("enabling of 'run at PCM rate' reduces accuracy, and also reduces CPU usage")
Added draft code for future external banks support (WOPL format for ADLMIDI and WOPN format for OPNMIDI)
ADLMIDI 1.3.3 2018-06-19
* Fixed an inability to load another custom bank without of library re-initialization
* Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Fixed incorrect 4-op counter which is still catch 4-op instruments on 2-op banks
* Fixed an incorrect processing of auto-flags
* Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event
* Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME!
* Updated DosBox OPL3 emulator up to r4111 of official DosBox trunk (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* The automatical choosing of 4 operator channels count has been improved (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
ADLMIDI 1.3.2 2018-04-24
* Added ability to disable MUS and XMI converters
* Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins.
* Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank).
* Added support for real-time switching the emulator
* Added support for CC-120 - "All sound off" on the MIDI channel
* Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept.
* Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
OPNMIDI 1.3.0 2018-06-19
* Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event
* Fixed an incorrect processing of auto-flags
* MAME YM2612 now results a more accurate sound as internal using of native sample rate makes more correct sound generation
* Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME!
* Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
OPNMIDI 1.2.0 2018-04-24
* Added ability to disable MUS and XMI converters
* Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins.
* Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank).
* Added support for real-time switching the emulator
* Added support for MAME YM2612 Emulator
* Added support for CC-120 - "All sound off" on the MIDI channel
* Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept.
* Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
Like Linux and macOS this will only support borderless fullscreen in the active desktop resolution now, which is what modern systems need.
The list of discrete resolutions has been removed as it makes no sense anymore with a fixed video mode - all the other scaling options remain active, though.
This removes 3 uniforms, consisting of 9 floats. Those were merged into other values that never get used at the same time.
It also moves the costly setup of the fixed colormap out of the render state into the 2D processing code.
Since 3D forces use of render buffers now, it is no longer necessary to draw the entire scene with the colormap active, meaning it can be handled more efficiently.
The fixed colormap is a per-scene global setting that normally does not need to change ever during rendering of a scene so it's easily shoved aside into a static uniform buffer.
Having to change this buffer for inconsequential stuff should be avoided, especially when there's other uniforms that are just as good to hold these values.
Apparently the shader math is not precise enough to ensure that two supposedly orthogonal vectors are truly orthogonal, resulting in a non-zero dot product
It was impossible to complete Sin City 2 The Satan Complex without cheating since ZDoom 2.6.0
Change in applying of DeHackEd patches from 77a4b9a29b broke triggering of important linedef that pushes friendly marine to exit switch
https://www.doomworld.com/idgames/levels/doom2/Ports/s-u/satanx
Actors get initialized from their defaults so anything done in the constructor or some explicit member initialization will be overwritten.
They must use their properties for setting up configurable fields and do the rest in BeginPlay.
This data is game critical and may only be altered by code that knows what is allowed and what not. It must never be altered by any user code ever.
However, since the SkyViewpoint actors need to set up some relations between themselves and the default sky portals the previously purely internal 'internal' flag has been exported as a new keyword.
* use names, not strings, to allow use of switch/case.
* avoid creating the checksum a second time per level.
* do an early-out check for maps that do not have scripted compatibility.
This removes the entire palette switch and all the special checks to ensure that no menu can be drawn over this image.
Instead it gives this texture its special palette in the texture manager so that the proper image is created right away.
I decided against exposing this as an editing feature because it is far too specific to this particular image and the raw page format it uses.
A quick check of /idgames shows no project ever replacing it - especially no ZDoom-based project - so no extended handling is needed to make this work with other texture formats.
- with renderers freely switchable, some shortcuts in the 3D floor code had to be removed, because now the hardware renderer can get FF_THISINSIDE-flagged 3D floors.
- changed handling of attenuated lights in the legacy renderer to be adjusted when being rendered instead of when being spawned. For the software renderer the light needs to retain its original values.
This data must be immutable, if any mod plays loose here, very bad things can happen, so this hole got plugged, even at the expense risking to break some badly behaving mods.
This deals with what seems to be the only hardcoded piece of text in Strife. Also added a translation to the French file and removed a few superfluous line breaks in the English one.
This also replaces DTA_ColormapStyle with proper implementations of its components. As implemented it was a very awkward mixture of various effects that already existed in a separate form. As a result of its implementation it required additional but completely redundant shader support which could be removed now. As a side effect of this change a new DTA_Desaturate option was added.