8fe703d747
Trace to adjoining leafs when necessary.
...
When the trace stradles a plane in the current leaf, check the other side
of the portal, too, as it is possible that leaf will restrict the movement
of the trace.
All current tests pass! However, I can think of some situations (and I
already have a solution) where things will fail, but that's next.
2011-12-06 17:27:05 +09:00
4c17ca9583
Break out trace_hits_portal() from trace_enters_leaf().
2011-12-06 08:46:04 +09:00
9a9079a2b3
Correct the start-solid in a corner test.
...
It turns out that the box trace CAN get out of the solid from that location
(though a similar point trace can not). This is because of my decision to
allow non-points to touch a plane from either side without crossing the
plane, whereas a point touching a plane is always considered to be on the
front side of the plane as there is no further information to disambiguate
on which side of the plane the point is.
2011-12-05 22:11:58 +09:00
4419d4c4ad
Move the trace into the leaf before testing the contents.
...
The trace is moved as far into the leaf as possible without leaving the
other side of the leaf. This ensures that trace_contents is started from a
good location. There is currently a problem with traces that stradle a
plane getting, but this has cleared up all the current contents related
tests.
2011-12-05 22:11:58 +09:00
c588d28b96
Clear contents flags before calling trace_contents.
2011-12-05 22:11:58 +09:00
8307d9f233
Rename check_in_leaf to trace_enters_leaf.
2011-12-05 22:11:58 +09:00
3bd029d599
Make the contents flags clear.
...
I got tired of not being able to remember which flag was which in the
output.
2011-12-05 22:11:47 +09:00
8e512a087c
More failing contents tests.
...
However, I have a plan :)
2011-12-05 09:03:04 +09:00
b4a497baab
Correctly restore the saved start point.
...
This fixes the point test failures.
2011-12-04 21:12:12 +09:00
7da6df9dfb
Use the "real" contents of the trace's location when visiting a leaf.
...
When visiting a leaf in box mode, use trace_contents() to get the highest
priority contents of any leafs touched by the box in the current location.
I'm now down to one failing test case, and it's an "allsolid" issue that
might be an incorrect assumption in my test case.
2011-12-04 19:14:35 +09:00
053d801e92
Break out the leaf visit code into its own funciton.
2011-12-04 18:52:17 +09:00
4e76aa3025
Don't split on a plane parallel to the motion.
...
This seems to improve the start/all solid cases a little, and it should
speed things up a little by avoiding unnecessary polygon tests.
2011-12-04 12:46:22 +09:00
ed8e09608a
Fix the negative fractions coming from edge_portal_dist().
...
I have a better fix in the works, but I wanted edge_portal_dist() to be
correct.
2011-12-04 12:11:27 +09:00
e5903a60ff
Put the mistaken test case back in.
2011-12-04 11:00:38 +09:00
eb5d2720e4
Avoid a segfault when there's no split plane.
2011-12-04 10:55:46 +09:00
cdfc922bce
Fix a silly test case error.
2011-12-04 10:47:52 +09:00
487a6b20ab
Test collisions with a ridge smaller than the box.
...
Whee, found a failing test case :)
2011-12-04 09:02:12 +09:00
55eb88b52c
Create some tests for MOD_HullContents.
2011-12-03 22:18:43 +09:00
581972c905
More file splitting for code reuse.
2011-12-03 21:13:01 +09:00
dadfb78992
Split out the hull data so it can be used in other tests.
2011-12-03 20:23:42 +09:00
9ad298a716
Check whether the portal and box intersect.
...
Now on to creating tests for MOD_HullContents :)
2011-12-03 19:59:12 +09:00
d9a641c600
Avoid a segfault when the hull hasn't been portalized.
...
Serves me right for forgetting to test the main engine :P
2011-12-03 09:06:57 +09:00
27642a080a
Avoid infinite recursion.
2011-12-01 12:57:06 +09:00
f9d56f2941
Add MOD_HullContents().
...
If trace is null or point type, or the hull doesn't have portals, or the
first node is a leaf, MOD_HullContents operates in point mode (exactly the
same way as SV_HullPointContents()). However, in box mode, all leafs
touched by the trace are checked for their contents. The contents field of
trace (a bit field) will indicate the contents type of all touched leafs.
The returned contents value indicates the most important contents:
solid > lava > slime > water > empty
The one's complement value of the contents type is the bit number of the
contents bit field. I'm not sure how useful this will be as getting the
amount of overlap is currently not supported.
2011-12-01 12:26:33 +09:00
7ee31dd475
Allow the trace start to be in multiple leafs.
...
This fixes a couple of in-solid tests, but something better is needed.
2011-11-28 20:56:21 +09:00
13d37f4838
Add a bunch of in-solid tests.
...
Tests where the box is only partially in a solid tend to fail (particularly
when the solid is on the back side of the split plane).
2011-11-28 20:56:21 +09:00
50b08c98fa
Add some snug-fit tests and fix the uncovered bugs.
...
The tests involve the box fitting into a hole with zero slop (this would be
impossible with point clipping).
2011-11-28 20:56:21 +09:00
985667ecba
Fix plane touching box backsideness.
...
Because a box has size, even when touching a plane, the side on which the
box is can be determined (unlike a point).
2011-11-28 20:56:21 +09:00
869cd19260
Box traces can now graze a corner.
2011-11-28 20:56:21 +09:00
45d55d7e9a
Test the simple wedge.
2011-11-28 20:56:21 +09:00
2c9b07b257
Scale the box edge vectors.
...
Now they represent the lengths of the edges as expected by the edge/polygon
code.
2011-11-28 20:56:20 +09:00
60dbc0e342
Fix the last few bugs breaking the distance code.
...
The code itself seems to work now. There are still some problems: the box
faces are using unit vectors for the edges, or I should go back to unit
vectors for the portal edges; starting in a solid corner won't always work;
etc. However, that's just mopping up: the main algorithm seems to be
working.
2011-11-28 20:56:20 +09:00
996859c367
Correct the projection code.
...
That needed to be the intersection of two coplanar lines.
2011-11-28 20:56:20 +09:00
ab2ec644d6
Clip the portals when running the test cases.
...
When the portals are too big, floats break down and break the tests. This
might not be much of an issue in real maps, but my tests use "infinite"
planes.
2011-11-28 20:56:20 +09:00
2abff68089
Fix some more silly bugs.
...
The target test now works, but some others have broken due to getting
negative fractions.
2011-11-28 20:56:20 +09:00
a1da8ecdd0
Fix some silly errors that broke most of the box tests.
...
Uninitialized variables and crossed signs. Oops :/
2011-11-28 20:56:20 +09:00
8fc99566ab
Add code to clip the motion of the box to the leaf's portals.
...
Unfortunately, something is broken (all box tests fail due to 0 fraction).
2011-11-28 20:56:20 +09:00
5ee552ea5b
Don't normalize the portal edge vectors.
...
This simplifies the collision handling code.
2011-11-28 20:56:20 +09:00
174f381125
Add some more tests for the ramp.
...
These tests pass, but show the basic polygon testing working (just not the
collision handling and thus fraction determination).
2011-11-28 20:56:20 +09:00
750b5ba0ed
Be a little more lenient with float comparisons.
...
Unfortunately, Pythagorus and binary don't play well together, so rounding
errors are inevetible when testing with a slope. However, 1e-6 seems to be
a good epsilon (printf's %g hides it nicely :).
2011-11-28 20:56:20 +09:00
73b93ffd74
Clean up the in_leaf test line.
2011-11-28 20:54:35 +09:00
e3d8394b7a
Use the split_plane for the in-leaf test.
...
This seems to work better (all previously working tests pass again), but
the target test is still broken.
2011-11-28 20:54:35 +09:00
7b59eaf0cd
Use the correct vector for the plane distance.
...
Oops :)
2011-11-28 20:54:35 +09:00
cde0bbb807
For now, don't use box clipping for point traces.
...
Until I figure out how I want to handle zero sized boxes, don't test them.
2011-11-28 20:54:35 +09:00
fd5aee1d5e
Use the portals to check leaf validity.
...
If the trace hits a portal on the plane that brought us to the leaf, then
we actually are in the leaf (otherwise, we shouldn't be here and thus
should ignore the leaf). At least, that's my thinking.
Many point tests fail (but they're really using box clipping with a zero
sized box) and two box tests fail.
2011-11-28 20:54:35 +09:00
297275e3de
Create edge information for the portals.
2011-11-28 20:54:35 +09:00
662c04dfdc
Add a function to obtain the unit vectors of a winding's edges.
2011-11-28 20:54:35 +09:00
e41da2f579
Store the start fraction and position in the right stack slot.
...
Oops. Yay, valgrind.
2011-11-28 20:54:35 +09:00
d61cb25a44
Add code to rebuild the bsp brushes.
...
Names and locations of declarations are still up in the air, but things
seem to be working assuming my test code is correct.
2011-11-28 20:54:35 +09:00
853bf13d9e
Move the winding code into libQFmodels.
2011-11-28 20:54:35 +09:00
91e65b6c80
Rename mplane_t to plane_t and clean up the mess.
...
I got rather tired of there being multiple definitions of mostly compatible
plane types (and I need a common type anyway). dplane_t still exists for
now because I want to be careful when messing with the actual bsp format.
2011-11-28 20:54:34 +09:00
2f23cfa4d0
Add a new (failing) test case.
...
This one demonstrates the need for more information in the bsp tree
(surface polygons). When the box collides with a corner where one side is
flat and the other angled, but there's a partition plane cutting the two,
the box can instead collide with the angled side before it hits the corner.
2011-11-28 20:54:34 +09:00
7a1faee460
Bail out when the trace advances past the nearest collision.
2011-11-28 20:54:34 +09:00
a943cdf2c4
Handle dual collisions.
...
When the trace collides with something on both sides of a plane, the nearer
collision is required. The code now correctly checks both sides and keeps
the nearer collision.
2011-11-28 20:54:34 +09:00
0cf5dec5bb
Fix the covered step tests.
...
However, there is still a problem with moves where the box is always cut
by the plane: both sides need to be tested (done), but when the first side
checked allows longer motion than the second, but still collides, only the
first side is checked. The shorter motion is required.
2011-11-28 20:54:34 +09:00
8cc320b7ef
Move the start point to the near side of the crossed plane.
...
I'm not sure the end point needs to be moved at all, but I'll leave it
alone for now. I have a couple of failing test cases that seem to be caused
by not handling moves where the box is always cut by the plane.
2011-11-28 20:54:34 +09:00
fa6390a46a
Correct the sign for the shift in frac.
...
However, this is not entirely correct as the new start point when testing
the other side of the plane also needs to be calculated.
2011-11-28 20:54:34 +09:00
b82d9f5894
Another test, another bug.
...
Fix an incorrect test using offset (forgot to negate).
2011-11-28 20:54:34 +09:00
9984a2e87a
Fix some missing usages of offset.
...
This fixes my one failing box clip test. Now I need to find more broken
cases. At least now, they should be real tests.
2011-11-28 20:54:33 +09:00
9d63298032
Tweak a fixme comment.
...
The code is potentially slow, especially on big maps, but I haven't noticed
any issues yet.
2011-11-28 20:54:33 +09:00
03abb3b27d
Add support for ellipsoids.
...
Not that boxes work yet, but the fix is the same.
2011-11-28 20:54:33 +09:00
b4da9241f6
Make a fresh start on box clipping.
...
I even have a failing test to fix :)
2011-11-28 20:54:33 +09:00
6d2b92125a
Make nva a little more memory efficient.
2011-11-15 13:47:05 +09:00
940476dce1
Do some renaming to make things a little clearer.
2011-10-02 15:07:36 +09:00
a356ce6572
Assume the trace will be allsolid.
...
Rather than setting allsolid when the trace fails to leave solid space,
clear it when the trace enters non-solid space. This is necessary because
the trace might visit only one node and thus the failure to leave solid
space will not be detected. This fixes the problem with hipnotic's bobbing
water.
2011-09-27 17:14:42 +09:00
9c6693d567
Correct hull3 and its tests.
...
I'd gotten the solid/empty parts backwards.
2011-09-27 17:11:57 +09:00
3e74aa5303
Add trace-qf-bad.c to Makefile.am and testclip.c.
2011-09-27 17:09:04 +09:00
e23ee07b6f
Ensure id's trace is properly initialized.
2011-09-27 15:38:28 +09:00
32ff639bf3
Add an old qf version of trace.c
...
This version is broken (it's the one "fixed" by commit 981622f9
2011-09-27 13:00:19 +09:00
9daa0b7bde
Rename the empty and solid flags, and use them correctly.
...
seen_empty and seen_solid much better reflect their meanings, and also use
them correctly (eg, visiting an empty node does not clear seen_solid).
Hipnotic's bobbing water is still broken, though.
2011-09-27 12:33:50 +09:00
a7482570b6
Document the geometry in the tests.
2011-09-27 12:30:21 +09:00
aa6b7ef7e8
Add some water based tests.
...
Unfortunatly, they haven't uncovered the bug.
2011-09-26 21:02:54 +09:00
800e8cb3da
Make the id trace code more readily usable in the engine.
2011-09-26 19:56:00 +09:00
ae0dc6f06b
Disable the "shouldn't happen" code.
...
It causes the tests to fail, and doesn't affect the problem I'm currently
facing.
2011-09-26 19:56:00 +09:00
baf9b7c181
Make the test nodes a little easier to read.
2011-09-26 19:56:00 +09:00
683adf1850
Print the name and texture number for model skins.
...
Use SYS_GLT (1024) for gl texture debugging.
2011-09-26 13:03:53 +09:00
d9ab3a1f54
Move the config file/command line parsing into qargs.c
...
I don't like the COM prefix, but it will do for now.
2011-09-11 14:57:05 +09:00
a71acc9ae5
Move the essential init code into Sys_Init().
2011-09-11 14:56:47 +09:00
6fb73b5ae8
Nuke some mystery code.
...
I have no idea why I did that, but it crept in with the var substitution
fix, so I guess it might have been an attempt to fix a bug, but it looks
like it was broken anyway.
2011-09-11 13:10:14 +09:00
e5add8b4f5
Use dstring_freeze() to cleanup some code.
2011-09-11 13:09:24 +09:00
8bab548d16
Make the hud type configurable via dirconf.
...
Currently only "id", "hipnotic" and "rogue" are supported (anything else is
treated as "id"). Has no effect in quakeworld (good thing too: changing
gamedirs is a little broken).
2011-09-11 08:13:26 +09:00
8e30d3098e
Fix asm ilnking in mingw.
...
It seems that recent binutils/libtool doesn't like exporting symbols that
don't begin with a _.
2011-09-10 17:49:14 +09:00
da7ddc35c0
Fix the segaults when trying to use snd_disk.
...
It's output is still bogus (and it writes to the current directory!), but
at least the plugin can be used without any nasty issues.
2011-09-10 12:07:18 +09:00
bfd1680c15
Fix a 32/64 bit portability issue.
2011-09-09 19:56:16 +09:00
999912e49a
I thought I'd tested those changes :(
2011-09-09 19:55:54 +09:00
a426dacc8a
Add a missing \n
2011-09-09 17:43:48 +09:00
d043e2bf17
Rewrite QFS_FileBase().
...
It now uses QFS_SkipPath() and QFS_FileExtention() to
find the file's base name.
2011-09-09 17:39:00 +09:00
d92488ce9f
Rewrite QFS_DefaultExtension() and QFS_SetExtension().
...
They now use QFS_FileExtension() to find the correct
place for the extension.
2011-09-09 17:37:45 +09:00
225f1cd06c
Rewrite QFS_StripExtension() to use QFS_FileExtension().
2011-09-09 17:35:12 +09:00
96ef0ffaea
Rewrite QFS_FileExtension() to be more correct.
2011-09-09 17:33:29 +09:00
08fa6be9f4
Fix a potential buffer underflow.
2011-09-09 17:30:07 +09:00
20d056e6c5
Fix my broken warnings fixes.
...
That's what you get for blinding working on code you don't grok :P
2011-09-08 21:05:33 +09:00
881d4babce
Fix some undefined symbols in snd_alsa.c.
...
Serves me right for testing with only my debug build :P
2011-09-08 18:10:09 +09:00
6da725d510
Simplify and slightly improve Cmd_StuffCmds().
...
Make use of dstring to manage the built command mini-script.
Ensure + and - that do not come after whitespace do not start a new
command.
2011-09-08 12:37:52 +09:00
e8e8dad535
Fix a potential crash with the cvar reset command.
2011-09-07 21:07:52 +09:00
2ae33a753a
Support non-interleaved mmap sound.
...
Unfortuanately, I can't test this properly as I don't have any such
hardware, but as the code is mosly an edited copy of the interleaved code,
any errors should be easy to fix.
2011-09-07 17:00:57 +09:00
a8ea3aaad9
Allow dma sound targets to specify an xfer function.
2011-09-07 17:00:18 +09:00
9ffa1f410a
Detect the silent death of the jack client thread.
...
When jackd gets an unhandled xrun, it stops all processing but neglects to
tell the client about it. Thus, add a bit of a watchdog function to
s_update() and assume the client thread is dead if there's no sign of life
after one second. No more hanging on exit.
2011-09-07 15:16:27 +09:00
581539f7af
Make debug printing a little smarter.
...
When a field or global name is used, the printed value reflects the type
of that variable.
2011-09-07 09:41:06 +09:00
91f6b7f555
Better use of Sys_Printf.
2011-09-07 09:41:06 +09:00
39190c5e2c
Remove an unnecessary include.
...
Don't need that :P
2011-09-07 09:41:05 +09:00
deddb5cb6a
Partially document the message api.
2011-09-04 09:58:12 +09:00
9afb691dd9
Change MSG_ReadShort to return an unsigned short.
...
Avoiding the sign extension by default seems to be more useful.
2011-09-04 09:58:12 +09:00
12e238f806
Add a function to convert quake angles to a quaternion.
...
The test works by comparing the result of AngleVectors with forward,
right, and up vectors rotated by the quaternion resulting from AngleQuat.
2011-09-04 09:58:12 +09:00
1c47f9e16d
Kill some magic numbers.
2011-09-04 09:58:12 +09:00
fe3cdbcf5a
fix a snafu in quattomat
2011-09-04 09:58:12 +09:00
eb205d73fd
Add a function to convert a quaternion to a rotation matrix.
2011-09-04 09:58:12 +09:00
5c9ab2832f
Fix win32 cross-building.
...
No idea if the code actually works :(
2011-09-04 09:48:16 +09:00
e50f0e18ba
Make netmain use netadr_t, same as netchan.
...
Having sockaddr and friends in a header file was bad news for portability
(especially windows).
2011-09-04 09:45:19 +09:00
5ee01879ec
Missed a spot for net_family.
2011-09-03 16:28:00 +09:00
80b2b82092
Add a cvar to control the address family.
...
OpenBSD doesn't allow mixed binding of ipv4 and ipv6, but being able to use
ipv6 enabled qf with ipv4 addresses would be nice...
2011-09-03 13:04:47 +09:00
29a52a8cc8
FIx it for IPv4, too.
...
Oops, I forgot about that :P
2011-08-31 18:32:47 +09:00
bfcdc5ed17
Fix qw networking on OpenBSD.
...
OpenBSD is very picky about the address size, but does provide sa_len and
friends to make life easier. Use them as appropriate :)
2011-08-31 18:07:41 +09:00
f75b0a611b
Some compile fixes for OpenBSD
2011-08-25 22:35:20 +09:00
0d5bebabe2
Replace qsockaddr with AF_address_t.
...
It seems qsockaddr's assumptions aren't necessarily portable, as OpenBSD
seems to be doing weird things with qsa_family. Even if that's not the
case, this is cleaner.
2011-08-24 09:14:02 +09:00
1cc2b1b178
whitespace
2011-08-23 01:39:40 -04:00
d2fa1e2479
QW IPv6: lose a pointless assign
...
We already assign a->family earlier, no need to do it again.
2011-08-23 01:39:40 -04:00
87ad73f146
Add even more info to the address comparison failure.
...
It turns out the family check is failing. Why?
2011-08-22 18:34:52 +09:00
ce07000054
Make the address comparison a little more informative.
...
Still hunting the openbsd connection issues. It seems the address
comparision isn't working.
2011-08-22 10:30:35 +09:00
1402feafd2
Kill some magic numbers and clean up some whitespace.
2011-08-20 16:30:43 +09:00
cf2845a387
Ensure Sys_Error can not form an infinite loop.
...
I don't remember what propted this change, but it seems like a good idea
anyway, so get it into the repository and clean out my stash :)
2011-08-20 13:13:43 +09:00
bb065bd233
Be a little leniant with vector param stores.
...
qcc always used vector stores to load values into the function parameters,
but if the location of the value is too close to the end of the global data
block (the vector spans the end of the block), it would trigger the bounds
check code. Thus, allow such instructions without a murmer, so long as it
actually is a parameter write.
2011-08-16 12:10:05 +09:00
53049e33eb
Make the interface code more portable.
...
It turns out SIOCGIFINDEX isn't (readily?) available in BSD, but
if_nametoindex() is defined by posix, so use that instead.
2011-08-16 10:03:43 +09:00
4cec4b9f96
Rewrite the interface detection code.
...
Turns out SIOCGIFCONF is rather painful to get working cross-platform. This
should work better, and can be used even with ipv6 :)
2011-08-11 18:32:39 +09:00
c1a60551ae
Clean up default rate setting and add explicit support for 48kHz.
2011-08-11 17:22:14 +09:00
5feb0454ca
Add and use SYS_SND for both sound and cd debug prints.
2011-08-11 17:20:33 +09:00
290ac30efc
Fix x11 gamma control.
...
Seems we lost a header include at one stage.
2011-08-11 16:08:20 +09:00
d3c2afc5d7
Handle old global vector compontents.
...
In the original save gave format, global vectors were saved as individual
components rather than as a single vector, using the _x/_y/_z tags on the
vector name. However, recent qfcc completely dumped vector components as
separate defs, so old save games would have trouble loading with progs
built with a recent qfcc. Thus, do the component translation if necessary.
2011-08-11 15:36:51 +09:00
ff857a9c71
Permit control of single character tokens.
2011-08-11 14:22:27 +09:00
805256ff65
Use the last used interface address for the socket address.
...
This allows the correct address to be put in the server info packet
allowing nq to work on multi-homed hosts. More testing needs to be done to
ensure nothing is broken, or better yet, a rewrite of the networking code
to properly associate the information with the packets.
2011-08-06 21:47:57 +09:00
ae9404cc27
Obtain the interface on which the packet arrived.
...
Once I sort out just how to get the information to the right place, this
should fix a lot of the problems with nq on multi-homed nodes.
2011-08-06 20:33:20 +09:00
3088566502
Replace get_address() with get_iface_list().
2011-08-06 18:57:53 +09:00
6f0ab844ea
Some more nq networking debug prints.
2011-08-06 16:54:01 +09:00
eba66b1dde
Doc tweaks and some whitespace.
2011-08-02 17:32:36 +09:00
76f894a29f
Add some debug prints for nq networking.
2011-08-02 15:22:57 +09:00
e5876752f3
Document the datagram net driver interface.
2011-08-02 15:22:33 +09:00
e89532cb9f
Fix a couple of missed view.h->clview.h changes.
2011-08-02 11:29:20 +09:00
8e140bc97e
Use SYS_NET instead of SYS_DEV for networking debug prints.
2011-07-30 17:44:03 +09:00
28610c08e3
Do not try to build testsound when not building sound libs.
2011-07-30 15:03:19 +09:00
bf58ad9d80
And silence a "set but not used" warning.
2011-07-29 17:21:33 +09:00
77dcd07b37
Remove a dead function.
2011-07-29 14:30:54 +09:00
50341d0972
Whitespace.
2011-07-29 13:51:58 +09:00
07d5b114bc
Clean out some dead code and variables.
...
We haven't had serial or ipx support for a long time.
2011-07-29 10:11:14 +09:00
1d57477101
Document the "public" functions of NQ's networking code.
2011-07-26 14:15:41 +09:00
64881d2eca
Finish the docs for netchan.
...
Also clean out some unnecessary declarations.
2011-07-26 11:30:02 +09:00
688e5c7e24
Use ncqport_e on the right field.
...
Well, now, that was incredibly silly, wasn't it? :P
2011-07-23 21:39:13 +09:00
9ccd570105
Fix a problem with linking FLAC libs.
2011-07-23 21:37:34 +09:00
3678b610eb
Make a start on documenting netchan.
2011-07-23 17:53:06 +09:00
2035e65bad
Make the qport flags a little more doc friendly.
2011-07-23 17:51:07 +09:00
e15771f4a4
Nuke a dead function.
2011-07-23 15:58:45 +09:00
efa0105748
Rename some headers to fix doxygen warnings.
2011-07-23 15:58:45 +09:00
b17e37f802
Remove uneccessary differences between ip4 and ip6 code
2011-07-23 15:58:45 +09:00
8ac5079ada
Get inputlines mostly working.
...
It should be only behind-the-scenes updates that are still a problem.
2011-07-09 21:16:38 +09:00
652b434e7b
Rework the inputline wrapper.
...
Use the resource map code for handle management (much safer).
Add support for the enter callback (function or method).
Unfortunately, it still doesn't work due to poor design of the inputline
user data.
2011-07-09 09:44:37 +09:00
3dd31b7de9
Fix some bugs found while hacking inputlines.
2011-07-09 09:42:11 +09:00
358a844a42
Implement --version-info configure switch to override QuakeForge
...
library versioning. From Lasse Collin, thanks!
2011-07-09 01:23:36 +03:00
4e66a5b327
Add rua rappers for the cvar alias functions.
2011-07-06 19:17:28 +09:00
6114156b49
Add Cvar_RemoveAlias.
...
Now aliases can be deleted (needed for menus).
2011-07-05 21:59:47 +09:00
a7291943f7
Fix up Cvar_MakeAlias's error checking.
2011-07-05 21:51:38 +09:00
d2894a6f68
Rename Cvar_AliasGet to Cvar_MakeAliase.
2011-07-05 20:28:57 +09:00
a8245e598e
Fix a memory leak.
...
The command hash table is shared between all progs engine instances, but it
was being allocated for every instance. Ensure only one is allocated.
2011-07-05 19:05:24 +09:00
6484dd16c7
Finish cvar alias support.
...
Several functions that manipulate cvars were not checking for aliases.
2011-07-04 21:05:42 +09:00
0f7390dd60
Clean up all the "set but not used" warnings.
...
gcc on my system is failing to treat this specific warning as an error :/
2011-06-19 10:48:02 +09:00
85617586af
PCX: display some information on bad PCX files
...
also, minor whitespace on <QF/image.h>
2011-06-14 13:31:30 -04:00
42ab0a7dbb
Ensure consize is correct in the software renderers.
...
The software renderers force the console size to be the same as the window
size (no scaling), but they weren't telling the console of the resize.
oops. Fixes the crash when running the software renderers with default
sizes.
2011-06-14 17:54:53 +09:00
c57d252dd4
More "set but not used".
...
Why is finding them so unreliable for me?
2011-06-14 06:26:10 +09:00
607a4be2e2
Fix a "set but not used" warning/error.
...
I'm not sure what I had planned with "list", so I just commented it out
with FIXMEs.
2011-06-13 16:44:30 +09:00
b18ff4ed3e
Move test-qfs.c into a test directory.
...
Same as before: avoiding -prefic-pic issues.
Also, catch some minor snafus found in the previous commit. With this, make
distcheck passes again :)
2011-06-12 16:34:15 +09:00
c522726021
Move the testclip program into its own directory.
...
Same as with the audio test program, this is to avoid issues with
-prefer-pic.
2011-06-12 16:12:52 +09:00
47201137d5
Make the default cd plugin configurable.
...
The default default is file, but now distribution maintainers can change it
if necessary.
2011-06-04 17:19:18 +09:00
8d1bd58ade
snd_dma.c fixes for non-power-of-two values. From Jacob Meuser.
2011-06-04 09:47:15 +03:00
67c7796c0b
Change default music backend from OGG to CD.
2011-05-31 00:05:35 +03:00
65789d22d9
Fix PNG build and use AM_CPPFLAGS instead of INCLUDES that is obsolete.
2011-05-28 10:47:11 +03:00
74a7e07dfc
Use AM_CFLAGS instead of CFLAGS.
...
CFLAGS is meant to be reserved for the user.
2011-05-10 12:44:44 +09:00
f17b1275ea
Undo an accidental commit.
2011-05-10 11:48:38 +09:00
77ccf8a824
Build the audio libs before the test dir.
2011-05-10 11:32:38 +09:00
f7a95ec2f4
Move the test program into its own directory.
...
This is to avoid issues with -prefer-pic (really need to clean things up
properly).
2011-05-10 11:25:12 +09:00
d3771dfeba
Resolve some inlining issues in recent gcc.
2011-05-04 09:31:18 +09:00
bc2174d92b
Remove some dead variables reported by Spirit.
2011-05-04 09:30:38 +09:00
2a2a431431
Register a complaint when the map has too many entities.
...
I was wondering why that parrot was dead.
Not realizing that negke's coag3 map had too many entities really ruined
the pleasure of playing it, so it's best to treat such situations as an
error (max_edicts can be bumped up to 32000 if need be, but 2048 is plenty
for his map).
2011-04-17 20:06:20 +09:00
47e55fe1c6
Properly terminate each fisheye quad strip.
...
The horizontal quad strips need to be rendered individually rather than as
one single strip. The latter results in ugly triangles crossing the screen.
2011-04-17 13:03:22 +09:00
55cc0f9206
Bring back the unsigned type (PROGS version bump)
...
This is only low-level support (the unsigned keyword still does not work),
but sufficient to make switch statements using jump tables work.
2011-04-09 10:07:47 +09:00
2bacfdabf2
Interpret func fields as selectors for entities with objects.
2011-03-30 20:19:31 +09:00
c8e1d7b45a
Fix the API for inputline->enter().
...
Pass the inputline object rather than the input text, allowing access to
both user_data and the input text.
2011-03-27 08:03:39 +09:00
84afc458fa
Allow the menus to overide the Escape key.
2011-03-25 18:02:59 +09:00
2be07fd652
Keep the the temp string out of progs for sprintf.
...
There's no need for the string to be in progs memory when printing as the
end result will be moved into progs memory regardless.
2011-03-24 11:45:58 +09:00
b0d1e782ee
Treat allocating less than 1 byte as an error.
2011-03-24 11:10:08 +09:00
1822290b1a
Fix the double offset of inputline text.
2011-03-24 08:50:32 +09:00
bc0cffc9c6
Fix handling of autorelease pools in the menu code.
...
Create a "menu_pre" function that creates the autorelease pool, change
menu_post() to release the pool correctly, and make the menu internal code
require and call menu_pre.
2011-03-21 13:14:14 +09:00
7c113a12db
Make zone errors a little more useful.
2011-03-20 15:50:09 +09:00
025c39cc02
Ensure stdout is flushed in the progs signal_hook()
2011-03-20 13:35:59 +09:00
104c29e4da
Avoid a segfault when the called function is invalid.
...
This is most likely to occur when dumping code from qfo files with external
functions.
2011-03-20 13:35:12 +09:00
f20424afe5
Make "bad type" output more useful.
...
Print the four (assumes non-v6) values in hex rather than "bad type".
2011-03-17 20:35:14 +09:00
ebfbd7c358
Disable the unsigned comparison instructions.
...
They need unsigned support, or special treatment, so they have to wait.
2011-03-17 20:33:38 +09:00
bce3935ea6
Add a void address instruction.
2011-03-10 19:28:03 +09:00
90de6b0499
Add a movepi instruction to support indirect moves of fixed size.
2011-03-09 10:29:24 +09:00
18005cc80d
Rename move to movei.
2011-03-09 10:28:40 +09:00
6c4563b21d
Change movep's name from <MOVE> to <MOVEP>.
2011-03-09 10:25:20 +09:00
4432bc0bef
Make the offset in zone dumps more useful.
2011-03-08 22:44:56 +09:00
5b8345eecb
Do not try to print values from null entities.
2011-03-07 08:28:20 +09:00
3b8a3f8302
Remove the vector component skip code from param searches.
...
Local defs no longer contain the vector comonents.
2011-03-06 21:02:29 +09:00
4794d66f42
Change jumpb's opa type to integer.
...
I'm not 100% certain this is correct...
2011-03-03 19:06:17 +09:00
57f735c99c
Avoid another segfault when debugging.
2011-02-15 15:33:18 +09:00
52010b8f7b
Do not segfault with bogus debug info.
2011-02-14 23:10:45 +09:00
55b7f6eee4
Avoid another segfault when debugging.
2011-02-09 10:13:08 +09:00
de33cd6017
Ensure auxfunction_map is properly initialized.
2011-02-09 08:28:20 +09:00
f72d6d6a27
Fix a typo in the opname for integer modulo.
2011-01-27 21:03:11 +09:00
33db650161
Add QuatInverse to calculate 1/q.
...
There's still no direct quaternion division because I don't know if the
definition of q1/q2 is (1/q2)*q1 or q1*(1/q2) (it does make a difference).
2011-01-18 22:22:18 +09:00
3c9991364b
Add a "void return" instruction.
...
I got fed up with always having to explicty return something.
2011-01-13 00:29:56 +09:00
13503198e5
Add quat_origin convenience constant.
...
Same as vec3_origin in that all elements are zero.
2011-01-11 08:41:40 +09:00
cb0bc7229a
Resurect the debugging messages in rua_obj.c
...
Yet another debug flag: SYS_RUA_OBJ
2011-01-10 12:26:10 +09:00
6650b35201
Make PR_Get_Param_Def aware of @args.
2011-01-10 12:25:31 +09:00
75ec6bf244
Clean out some unnecessary types from the progs engine and clean up the mess.
...
This is a nasty commit, sorry, but 99% of the commit is interdependent.
2011-01-10 12:25:31 +09:00
d764ef80d0
write "color" PCX files (stupid bug)
2011-01-09 04:34:35 -05:00
68b5db87b2
Document PCX read/write functions & struct
2011-01-09 04:06:50 -05:00
4090674fa5
LoadPCX(): Turn convert argument into a qboolean.
2011-01-09 04:05:57 -05:00
af8c1e4cc2
Enable RLE coding for PCX output
...
Pulled from DarkPlaces's lmp2pcx tool, which I have just been made aware
of.
2011-01-09 03:06:25 -05:00
e819ea3b7f
QFimage: Don't use qfs_filesize when loading images
...
Use Qfilesize() to get the size of a read file, don't count on quakefs's
global qfs_filesize variable pointing at the right file.
2011-01-09 01:36:40 -05:00
a85c0713aa
Nuke libQFbuiltins.
...
The gib and "common" builtins are now part of libQFruamoko.
2011-01-04 21:21:19 +09:00
999252c07a
Fix the same (ancient!) bug in ipv4 code...
...
Don't read the address of the peer until we know we've actually read
a packet.
2010-12-30 07:15:22 -05:00
1b23c470cb
Fix unknown family msgs
...
Found the source of all the bogus "unknown address family" messages --
reading the returned address of an errored read. D'oh!
2010-12-30 06:38:20 -05:00
9e0575313e
Net debugging
...
Add a SYS_NET developer mask for debugging network, and use it.
2010-12-30 05:01:58 -05:00
e96cbbdbd9
Captain Whitespace(tm) is back.
...
Don't judge me... :)
2010-12-30 04:58:49 -05:00
5cfce584c9
ipv4 formatting changes
...
IPv4 addresses should be formatted identically to how we're used to seeing
them, without the brackets that denote an IPv6 address and separate it from
the port specification.
2010-12-30 04:46:44 -05:00
e7462d025f
Call freeaddrinfo() when done with the address info.
2010-12-30 04:34:15 -05:00
e89fb3a868
Nuke a structure I didn't need.
2010-12-30 04:30:16 -05:00
0a21f6a6df
Move a comment where it belongs
2010-12-30 03:43:46 -05:00
87dd61a6f8
Fix IPv4 interaction
...
Can now talk to IPv4 hosts again.
2010-12-30 03:42:22 -05:00
878a9cfb6a
ipv6: builds and works now, still can't interact with ipv4 clients/servers
2010-12-29 07:47:15 -05:00
fdb4d885ae
ipv6: start cleaning up strict-aliasing problems.
2010-12-29 06:58:14 -05:00
cdf5ef2565
ipv6: Fix glibc defines
2010-12-29 06:36:43 -05:00
3090a64faa
Use the correct param for the full_new path.
...
This fixes the broken downloads.
*taniwha dons a brown paper bag.
2010-12-28 14:44:26 -05:00
6e18c3df85
Make qfs developer prints a little more controllable.
2010-12-28 09:08:51 +09:00
1f0851cc61
Fix QFS_FilelistFill for pak files.
...
Forgot to ensure the path separator was included in the fnmatch param. This
fixes the broken *list commands.
2010-12-27 10:31:54 +09:00
70783e4bd5
Disable all sound calls if jack could not be contacted.
...
This fixes the file handle leak when jack is unavailable.
2010-12-25 20:31:14 +09:00
14480fd1b4
Move the call to R_ClearEnts to the renderer.
...
This fixes the hang on certain maps in qw-client.
2010-12-25 19:59:34 +09:00
e65d1a7ccf
Remove a redundant assignment.
2010-12-25 19:59:34 +09:00
9defba8d92
Get rid of plugin versioning (again).
...
automake needs -avoid-version to be in Makefile.am, otherwise it doesn't
make libtool do the right thing...or something. My head hurts. ;)
2010-12-25 04:45:39 -05:00
bbc8154ec7
joystick fixes
...
Make /dev/input/js0 the default joy_device, and temporarily bump max
buttons to 18 (until I kill the maximums entirely)
2010-12-24 05:03:32 -05:00
ce64227a71
Fix for debian wildmidi.
...
This might break lenny :/
2010-12-24 17:33:09 +09:00
de04e1b602
Lots of win32 (mingw cross) build fixes.
...
HTTP (curl) support is missing, but everything else builds.
2010-12-23 11:40:16 +09:00
889bbd364e
Explicitly link testsound against libQFutil.
2010-12-18 22:21:55 +09:00
23d3407622
Change a few defaults as suggested by bigfoot.
...
in_dga -> 0 (until X is fixed)
gl_multitexture -> 1 (why was this 0? not enough support back then?)
cl_usleep -> 1 (seems to be ok)
host_mem_size -> 40 (even 32 isn't enough these days)
rate -> 10000 (we're not in the modem era any more)
cl_mem_size -> 32 (16 is not enough, 32 sounds better than 24)
2010-12-16 11:34:39 +09:00
765807def0
Make sdl's sound parameters easy to tweak.
2010-12-15 18:48:25 +09:00
d265bbf011
Support any sample rate.
2010-12-15 18:48:25 +09:00
df65679028
Remove support for alsa 0.9.
...
It's way obsolete and I doubt we'll ever need it again. I do wonder what to
do abut sun, sgi etc.
2010-12-15 18:48:25 +09:00
9b9a60aa89
Make the -mem suggestion a little more realistic.
...
16M hasn't been enough for a long time.
2010-12-13 19:11:48 +09:00
774f049646
Fix garbage at edges of conchar characters.
...
Move the texture coordinates in 1/4 of a pixel. To avoid unnecessary
calculations, pre-caclulate the character cell texture coordinates and
blast them into the the texture coordinate array.
2010-12-11 12:09:30 +09:00
8919aec663
Get global fog working in mtex mode.
2010-12-10 21:40:36 +09:00
ce96e6b055
The beginnings of fog support.
...
gl_fog.c is taken from fitzquake with only minor modifications to get it
into QF. Other than worldspawn/network parsing, it's not used yet.
2010-12-10 17:17:30 +09:00
6114495870
Don't try to load skys named "".
...
This makes 'loadsky ""' and 'loadsky none' equivalent.
2010-12-10 17:17:30 +09:00
c4f71c0cda
Move r_skyname handling from R_NewMap to R_LoadSkys.
...
r_skyname now acts as the default sky to use when no sky name is specified
by other means ("none" is still no sky). 'loadsky foo' will load the
"foo*" sky textures, 'loadsky none' gives the default sky, and 'loadsky
""' causes uses r_skyname.
2010-12-10 17:17:30 +09:00
8e557e81b6
Break out the guts of Ed_LoadFromFile into ED_Parse.
...
ED_Parse does not support progs privided parsing (at this stage, anyway),
but this will allow clients to easily get at the entities in a map.
2010-12-10 17:17:29 +09:00
843823de84
testsound depends on libQFutil
2010-12-10 17:07:06 +09:00
981622f969
Make MOD_TraceLine behave "correctly".
...
MOD_TraceLine now behaves the same as id's SV_RecursiveHullCheck (from
WinQuake). This means that even if the trace would escape from solid space
into non-solid space, the trace is treated as allsolid if it crosses from
one solid space to another before hitting the empty space.
trace-id.c is used only for establishing the behaviour of id's code.
2010-12-06 15:30:56 +09:00
c2af7896bd
Revert "make droptofloor continue the trace if it starts solid"
...
This reverts commit 10232acdfe
2010-12-05 14:56:32 +09:00
31640dd1b9
Clean out the last traces of my boxclip code.
...
I've been experiencing funny trace issues while playing Soul of Evil. While
I think the boxclip dregs shouldn't be causing problems, it's probably best
to clean them out properly before trying to fix anything.
2010-12-05 14:52:20 +09:00
b1b1a02c6c
Get entity allocation and freeing working correctly.
...
This fixes the missing static entities.
2010-12-04 23:37:58 +09:00
a4b97e9e2e
Dynamic entity allocation. Unlimited static entities.
...
Entities can now be allocated dynamically. They are freed whenever a new
map is loaded.
Use the dynamic entities for static entities.
2010-12-03 21:01:52 +09:00
a6941e27ef
Eliminate MAX_VISEDICTS. Unlimited visible entities.
...
The renderer can now render as many entities as can be crammed into the
currently visible set of nodes.
2010-12-03 14:59:02 +09:00
f98b002f9e
Make R_StoreEfrags const-correct.
...
R_StoreEfrags does not need to modify its parameter or anything to which
it directly refers, so make the pointer single-level and constant.
2010-12-03 13:30:49 +09:00
085b0f4448
Remove R_SplitEntityOnNode2
...
When R_AddEfrags is used (as is the case in nq), this function is
redundant. Brush models in qw are currently broken (invisible), but that's
just a matter of getting qw to use R_AddEfrags instead of R_NewEntity.
This removal should speed up the software renderers a little bit.
2010-12-02 08:31:48 +09:00
8831a109a4
Create and use mclipnode_t.
...
I didn't realize this was a critical part of fitzquake's large map
support. This should fix the non-solid brush entities in Conflagrant
Rodent.
2010-11-29 09:36:21 +09:00
b0217bf0cf
Merge branch 'master' into forge
2010-11-28 03:05:30 -05:00
98a5d591d5
Don't read past the end of a sub-file.
...
This fixes a libvobis streaming problem with vorbis files within pak files.
2010-11-28 11:28:44 +09:00
341726afb9
Reimplement Qgets using Qgetc.
2010-11-28 11:18:07 +09:00
185e21e4e4
Tweak some developer cvar usage.
2010-11-27 16:53:17 +09:00
9900aa3d02
Fix vid_fullscreen for modern X window managers.
...
We are now compliant with wm-spec 1.4, so fullscreen toggling should always
work.
2010-11-27 16:19:04 +09:00
e53ff2a36d
A bit of house keeping.
2010-11-27 15:10:34 +09:00
dd87274027
DGA mouse tweaks.
...
o Check the return value of XF86DGADirectVideo.
o Use input_grabbed instead of in_grab for checking whether to enable dga
mouse and other grabbed actions.
2010-11-27 09:25:29 +09:00
f31595781c
Add and used SYS_VID for video/targets masked prints.
2010-11-27 08:48:00 +09:00
cacd2fb895
FiztQuake's lerping system.
...
Seems to be mostly working. I get some funny results for zombies, but that
might be moving and turning at the same time causing issues.
2010-11-26 16:20:05 +09:00
31c13d92a2
Protocol 666/large map support from FitzQuake.
...
Alpha and lerping aren't implemented yet, but things seem to be working. I
can load and play oms2.bsp (Conflagrant Rodent).
2010-11-26 16:20:05 +09:00
8c4fe2f844
Rename Sys_DPrintf to Sys_MaskPrintf.
...
We now have finer runtime control over what gets printed. Need to do a
SYS_DEV audit, creating new masks as apropriate.
2010-11-26 16:19:26 +09:00
92f84e97a4
Unlimited loaded models.
2010-11-26 16:19:25 +09:00
abc17c1d91
New cvar commands from fitzquake.
2010-11-26 16:19:25 +09:00
d6ceaef7d2
Whee, 64bit cpus and sizeof.
2010-11-24 20:42:07 +09:00
addbcaa09c
Add PL_GetFromFile builtin.
...
This is an extension "wrapper" (no such C function). This allows ruamoko
programs to read property lists without worrying about the memory required
to store the string for the property list being read.
2010-11-24 17:01:19 +09:00
defc2a264b
Add QFile_GetHandle()
...
This allows other rua builtins to make use of ruamoko files.
2010-11-24 17:01:19 +09:00
fc2a6e0fb7
Don't be so spammy with file errors.
...
Record a file even if it could not be found. This way, the error message
gets printed once per file rather than every time.
2010-11-24 17:01:18 +09:00
3878b76cc5
Start using autorelease.
...
Much more testing is required (oh, but for qc-valgrind), but there is now
a ~945kB block of free data in the menu progs heap :).
Also, correct the printed size of the memory block to not include the
block header size.
2010-11-24 17:01:18 +09:00
4518e6af91
First stab at implementing autorelease.
...
It's probably nowhere near right, but probably ok for now (I need to study
the GNUStep code). I'm unhappy with the menu code hook, but it will have
to do for now.
2010-11-24 17:01:18 +09:00
5fc4ef63f6
Rewrite ruamoko plist support to use handles.
...
The plist code was written long before I thought of resource handles, and
then it was forgotten. This is much nicer and safer than storing C
pointers in progs memory space (*shudder*).
2010-11-24 17:01:18 +09:00
763cec3838
Some spelling/grammar corrections.
2010-11-24 17:01:18 +09:00
d4ae231f34
sezero's NET_SendToAll fix
...
Here's a patch to NET_SendToAll() which was always
broken: it never skipped non-connected clients.
Depending on the compiler, it would wait the whole
5 seconds of its blocktime before it gave up.
While there, changed its blocktime argument to
double (the comparison is against a double.)
2010-11-21 14:27:43 +09:00
1dfb914c46
fix an oopsie (rebase!!)
2010-11-21 14:25:32 +09:00
4cec187465
zixthree's wav file patch
...
Wav file were not read correctly when encoutering most chunk type beside the ones used by QuakeForge.
This patch will fix the riff loader code so that unused but defined chunk are skipped. Most wav files should now be loaded correctly fixing some silent sound effect.
Also fixed a typo in wav loader and reordered wav validity check so that format is checked first. The data chunk could be inexistant on some weird format and so an invalid format is a more helpful error text.
! Fix: Skip unsupported chunk in riff loader instead of rejecting riff file.
! Fix: typo in Microsoft name.
! Fix: ordering of wav validity to enable more helpful error text.
2010-11-21 14:18:15 +09:00
99e87b092b
zixthree's stereo swap patch.
...
Modified slightly for formatting and cleaner swapping.
2010-11-21 14:09:23 +09:00
6771e7b8b5
sezero's win32 Sys_ConsoleInput patch.
2010-11-21 13:55:03 +09:00
204c509a43
sezero's "Bad old_size value in Z_Realloc()" patch.
2010-11-21 10:06:56 +09:00
15b423cbe7
Track 0 is used to stop the BGM
2010-11-20 14:32:27 +09:00
3309f483b6
Don't require pr_boundscheck for quoth.
...
I don't know about other FTEqcc compiled progs, but quoth doesn't try to do
anything clever (all its denormals are either vars of the wrong type, or
-0.0).
2010-11-20 14:12:40 +09:00
9d6fd32206
Ensure the the progs data is aligned.
...
Some QuakeC compilers (eg, FTE) insert a data chunk between the progs
header and the rest of the progs data. Unfortunately, FTE does not maintain
the assumed 32-bit alignment.
2010-11-20 09:02:56 +09:00
2f504709dd
Print data being loaded from an entity.
2010-11-20 00:31:34 +09:00
232d2f7e18
Fix an undefined operation thanks to spirit of the domain quaddicted.com.
2010-11-16 17:13:22 +09:00
6260130ae5
Fix borked autoconf of dga/vidmode headers.
2010-11-16 00:58:19 +09:00
37fb8d22da
Don't open a streamed sfx when there's no sound driver.
...
This happens when qf fails to connect to jackd (possibly other times).
There is probably a better solution to the problem, but not opening a
stream when the sample rate is reported as 0 definitely fixes the inifinite
recursion in read_samples().
2010-11-14 20:46:29 +09:00
824e33c82b
Fix a sizeof braino.
...
Somebody (probably me) got a little over-happy with sizeof.
2010-11-14 19:22:47 +09:00
f63e505c92
Don't realloc the string pointer table.
...
This causes a bit of memory waste, but avoids breaking the pointers in the
string hash table.
2010-11-14 19:21:16 +09:00
e6b783a616
Don't touch the watchpoint conditional when printing.
2010-11-13 14:36:33 +09:00
ff49239500
Fix shared config files.
...
We've allowed a single level of parent directy access in quake path names
for a long time, but this got broken by qfs_expand_path. Thus, make
qfs_expand_path allow a certain number of parent directory levels (usually
0 or 1).
2010-10-16 14:17:09 +09:00
ef7958d680
Lots of const correctness.
2010-10-13 20:52:08 +09:00
9a30968c87
type size correctness
2010-10-13 20:52:06 +09:00
cd159e1cc1
Use LoadBSPMem to load brush models.
...
Now that Mod_LoadBrushModel uses bspfile.[ch], the engine uses the same
code as the tools to work with bsp files.
2010-10-13 20:52:05 +09:00
db898655d1
make LoadBSPFile own the memory for the bsp data
2010-10-13 20:52:05 +09:00
719ca15516
make LoadBSPMem work in-place
...
LoadBSPMem now modifies the passed in buffer rathern than allocating new
memory. One step closer to cleaning up brush model loading.
2010-10-13 20:52:05 +09:00
56fb4d9a22
allow safe bsp freeing
...
any memory the bsp thinks it does not own will not be freed
2010-10-13 20:52:05 +09:00
1d86e71404
make WriteBSPFile take a const bsp_t *
...
This means that the supplied bsp can now be reused, as it should be.
2010-10-13 20:52:05 +09:00
f4042c5b91
Make the bsp disk data structures type size independent.
...
However, this assumes float is always 32 bits.
Also use size_t for the *size fields in bsp_t and clean up the mess.
2010-10-13 20:52:05 +09:00
3f08268038
Make sure unterminated lump names don't cause propblems when comparing.
2010-10-10 18:31:14 +09:00
1902ca6159
Ensure the string to be hashed is terminated.
2010-10-10 18:21:30 +09:00
7dc1ccdbea
Add a function for retreiving the parsed token.
...
Saves having to reach into the token's dstring (script->token->str was
getting annoying).
2010-09-26 13:50:17 +09:00
827d0d0ad6
Scripts now treat {}()': as single character tokens.
2010-09-26 13:50:17 +09:00
f666f8d27a
Get the lib dependency for testsound right.
...
No need for $(top_builddir) when the lib is in the same directory. Fixes
parallel builds.
2010-09-25 23:07:06 +09:00
42faad9015
Move expand_squiggle() from quakefs to sys, and rename to Sys_ExpandSquiggle.
...
Hopefully the final resting place of this function.
2010-08-25 14:00:04 +09:00
e9bd9a4baa
Move QFS_CreatePath() to Sys_CreatePath().
2010-08-25 13:52:24 +09:00
4f620655be
Document quakefs.h
2010-08-25 13:40:22 +09:00
f1943ebaab
Fix some path compression bugs.
2010-08-25 13:38:45 +09:00
550b094b93
Unit testing for QFS_CompressPath
2010-08-25 13:38:30 +09:00
05c57f219d
Nuke a comment.
2010-08-25 13:38:24 +09:00
c6be3c469a
Make the names of static functions canonical.
2010-08-25 13:38:24 +09:00
bbf2ac0204
Avoid creating // in path names.
2010-08-25 13:38:18 +09:00
ba8ca132a9
Change QFS_Gamedir()'s parameter from dir to gamedir.
2010-08-25 13:31:24 +09:00
745bdfafdf
Eliminate QFS_LoadHunkFile().
...
It is unused, and part of the group of functions I wish to remove from QF.
2010-08-25 13:31:23 +09:00
cbee789fe1
Change ProgPath to ModelPath and dir.progs to dir.models.
...
The default is still $path/progs, as that is what is expected by the
game-code.
2010-08-25 13:31:13 +09:00
cf40f5073d
Nuke QFS_WriteBuffers.
...
This function is too dangerous for my liking, and it's now unnecessary
since qfs has been locked down.
2010-08-25 13:31:13 +09:00
031055a91f
Move the qfs_* cvars out of quakefs.h
...
The qfs cvars are all private.
2010-08-25 13:31:13 +09:00
0cc4bc8c69
Move searchpath out of quakefs.h.
...
It's not needed, nor should it be used, anywhere else.
2010-08-25 13:31:13 +09:00
478394ef81
Nuke MAX_GAMEDIR_CALLBACKS
...
The number of gamedir callbacks is now unlimited.
2010-08-25 13:31:08 +09:00
a51e888a1b
Nuke MAX_OSPATH and clean up the mess.
2010-08-25 13:31:08 +09:00
baede61f4f
New function: dstring_strdup
...
I got tired of always doing dstring_newstr/dstring_copy, so I thought it
was time to wrap it. dstring_strdup is the dstring equivalent of strdup.
2010-08-25 13:31:00 +09:00
5a6e66b23e
hopefully, correct plugin linking options
...
how we got away with this for so long is beyond me, but it seems libtool
really wants -rpath even for plugins (otherwise it refuses to install them)
2010-08-21 13:01:35 +09:00
2185a3dcd0
Remove almost all of my boxclip developement.
...
This is to prevent others accidently getting headaches from my code.
2010-08-20 14:13:23 +09:00
fd24170b32
get the behavior or PL_NewData correct
...
It taking ownership of the data was the correct behavior, so go back to that.
2010-08-20 13:21:22 +09:00
a744caa421
The public api of qfplist is now fully documented.
...
Evertyhing that can or should be private now is, and all public functions
are documented.
2010-08-20 13:10:37 +09:00
1442273a8f
more opaque correctness
2010-08-20 12:58:37 +09:00
f55c203c5e
use the plist api correctly
...
don't work directly with the plist data. the structs that enabled that will
go away shortly.
2010-08-20 11:57:47 +09:00
669771681a
split up and modernize configure.ac
...
Most of the guts of configure.ac have been moved to config.d and are then
brought in by m4_include. This will make maintaining configure.ac much easier.
Also drop use of PROGRAM and VERSION, using PACKAGE_NAME, PACKAGE_VERSION, and
on occasion, PACKAGE_STRING instead, and clean out some old files we no longer
need.
2010-08-19 15:01:43 +09:00
4449f10c0a
get alsa and sdl working, though sdl seems to be mono only
2010-08-15 05:15:47 +00:00
bc4a3e79dc
d'oh, bogus $
2010-08-14 02:48:53 +00:00
81ac779b7f
forgot to add libsamplerate to the default renderer
2010-08-14 02:38:19 +00:00
cc697236e5
bah, forgot that libsamplerate doesn't check for errors
2010-08-13 01:48:48 +00:00
54fc922f6c
better error checking while reading streamed data
2010-08-13 01:48:20 +00:00
ce5658416d
add support for up to 8 channels in sound effect files
...
The sounds are down-mixed to 2 channels (qf does not (yet) support more than
2 channel output), but this allows pretty much anything to be used for a
source of music. Only 5.1 (6 channel), stereo and mono have been tested, but
the others should work (any issues would be mis-interpretation/implementation
of the channel layout).
2010-08-12 02:28:27 +00:00
b1620616b9
reset the "resampler" when seeking
2010-08-11 23:47:31 +00:00
22e8698827
resampling now works
...
However, no fallback for when libsamplerate is missing.
2010-08-11 23:47:03 +00:00
1c985bc925
bah, forgot these
2010-08-11 23:46:28 +00:00
3499f5257f
add a test app and a workaround for the clicking in the resamled stream
...
the proper fix for the clicking is to either use SRC's callback resampler or
fix snd_mem.c to handle not getting the samples it expects, but I think the
callback will be better in the long run.
2010-08-11 23:45:56 +00:00
0e3b395943
ok, non-resampled flacs now work beautifully
2010-08-11 23:45:32 +00:00
7502cd9ec5
making slow progress on sound quality
...
streamed oggs playback cleaning when not resampling, but flacs are still crap
2010-08-11 23:45:09 +00:00
65a748fc3c
floating point mixer now working
...
the resampler is being badly abused for streams, and it's not yet properly
autoconfiscated, but things are working. Better yet, at the correct pitch and
speed.
2010-08-11 23:44:34 +00:00
2bb2d14b89
make "sample counts" frame based rather than mono sample based
...
that was always horribly confusing
2010-08-11 23:43:35 +00:00
d0906f1453
conditionally build the sound format support files
...
Rather than using an ifdef around the entire code, get autoconf to do the work
for us. For one thing, this allows doxygen to produce decent docs. It also
makes for less compalation when building without support for various formats.
2010-08-11 23:42:42 +00:00
c0a8c6c695
properly prefix all functions, static or not
...
makes doxygen produce better docs
2010-08-11 23:41:04 +00:00
ac44950a69
sanitize the code by using defines for old flac libs
2010-08-11 23:40:35 +00:00
46a067b2f6
Do proper error handling when loading sound files.
...
This fixes the segfault grg got when trying to play a 5.1 channel file.
2010-08-08 03:02:55 +00:00
0bbb805b94
fix a case&paste error pointed out by grg
2010-08-08 01:58:17 +00:00
0dfff8fd58
ignore stuff
2010-08-07 10:42:09 +00:00
adee45d22b
add a comment about the valid range of samples
2010-08-06 01:58:12 +00:00
98a0da742a
Prefill the sfx stream buffer to ensure the decoders have allocated any memory they might need. Problem found using jack_interposer ( http://repo.or.cz/w/jack_interposer.git ).
2010-08-06 00:41:42 +00:00
dabb720fd1
be a little more honest (don't say "Playing" until we actually can)
2010-08-05 07:23:06 +00:00
6e2a8f1e3d
Do not allow sounds to start when we have no connection to the jack server. This fixes the shutdown hang when the connection to the server is lost.
2010-08-05 07:20:50 +00:00
ace5e7a702
oops
2010-08-05 02:38:47 +00:00
970dd0b872
avoid the old dga headers if we can (they're now deprecated)
2010-08-05 02:35:16 +00:00
3e0aaea535
more build fixes from Despair (parallel make, this time)
2010-05-28 13:37:51 +00:00
c1b12ed6ec
fix a couple of gcc 4.5 issues that Despair pointed out (I don't have it yet)
2010-05-27 12:21:50 +00:00
eb636ea16f
win32 fixes and vc2008 build files from phrosty
2010-03-12 10:51:07 +00:00
b49614a44f
a bit of ncurses related cleanup
...
doesn't fix the corrupted input line when the output window is busy, but that
might be a gnome-terminal bug (seems to be ok on the linux console)
2010-01-13 06:52:42 +00:00
6a8f14c701
nuke another \ in command handling
2010-01-13 06:51:13 +00:00
edabbd5abe
fix inputline updates when tab completion produces a large list
...
o never use stdscr: curses does not support overlapping windows. though
stdscr was used only for getting the screen size, this is not necessary as
the TIOCGWINSZ can be used instead.
o batch the prints generated by tab comletion to avoid frequent updates of
the screen. this seems to have fixed the corrupted output of the inputline
2010-01-13 06:47:48 +00:00
e35ca56c1e
wrap the call to Con_BasicCompleteCommandLine in a local function
2010-01-13 06:47:21 +00:00
df7c5b2908
cleanup Con_BasicCompleteCommandLine a tiny bit
...
remove an unnecessary strdup/free and fix a strncpy bug
2010-01-13 06:46:54 +00:00
53cd9be90a
Progress on map changing with qtv clients
...
Rename SV_DemoSendMessages to SVR_SendMessages, and make sure SVR_SendMessages
and SV_qtvSendMessages get called when SV_SendMessagesToAll is called.
2010-01-13 06:45:43 +00:00
7827086b54
make sure we actually have a stack frame
2010-01-13 06:42:59 +00:00
997102fea8
audit the usage of "only"
...
There are still a few iffy places (notably around certain prepositions), but
the relevant sentences are now much easier to read.
2010-01-13 06:42:26 +00:00
0a203c0ab5
qccx (etc) "integer" autodetection.
...
Check for usage of denormal floats and if found, either bail with a
descriptive error message or give a mild warning that things will probably
break. This avoids the possibility of things like RuneQuake getting "lucky"
and doing real harm, and certainly avoids the segfaults.
2010-01-13 06:36:54 +00:00
00e590f5f5
Really nail down the args param in rua_obj_msg_sendv().
2010-01-13 06:36:16 +00:00
dbe0c763d5
fix the placement of the "paused" icon
2010-01-13 06:35:33 +00:00
8abb9a69aa
remove support for an optional = in struct/union declarations
2010-01-13 06:34:32 +00:00
00f9d48f10
be a little more paranoid
2010-01-13 06:33:03 +00:00
5c788d8d44
state.f is not an id instruction
2010-01-13 06:30:07 +00:00
ff61dbb329
fix some sillies with QFS_FileList
...
Use dynamic strings instead of temp strings for the list
2010-01-13 06:29:01 +00:00
e0d669590c
plug a memory leak
...
the progs memory was never being freed between maps because the pointer was
being cleared at the start of PR_LoadProgsFile.
2010-01-13 06:27:19 +00:00
5d6977288f
implement bounds checking on all opcodes
2010-01-13 06:19:50 +00:00
cb5bd43d4c
warning fix from shortcircuit
2009-12-24 07:33:24 +00:00
f315a122e5
attempt to handle jack shutdown. this should avoid locking up on client shutdown when jack disappears
2009-12-24 06:35:15 +00:00
bf04589510
conheight proved to be eaiser than expected (d'oh, don't know why I couldn't see the obvious)
2009-12-24 05:46:16 +00:00
a5f0fbc821
Proper widescreen support. The GL renderer now respects the pixel aspect calculated by the vid init code. Also, a new cvar: vid_aspect. The format is width:height and the values may be any float greater than 0. The default is 4:3, but any units may be used.
2009-12-24 05:33:41 +00:00
4b0320f341
glx, gly, glwidth and glheight are now gone too. also GL_BeginRendering
2009-12-23 08:20:29 +00:00
ee0de1b4e1
got it right this time
2009-12-23 08:05:03 +00:00
c2945605bc
oops
2009-12-23 07:57:07 +00:00
8ddfdf03b2
with the changes in size handling, viewport setup becomes much simpler
2009-12-23 07:53:05 +00:00
f2004abecc
nuke scr_width and scr_height
2009-12-23 07:00:42 +00:00
a2fa2d425b
fix viewsize interaction with the cleaned up screen size handling
2009-12-23 06:29:11 +00:00
e0cfe795b0
fix a bogus range check. this could have caused an infinite loop
2009-12-23 06:28:11 +00:00
97f54e22df
fix the broken sdl/sdl32 hud
2009-12-23 02:08:49 +00:00
018a0b3bb6
fix the missing crosshair
2009-12-23 01:26:14 +00:00
28601c8ea4
more screen size cleanup
2009-12-22 13:12:03 +00:00
5d15c70a0d
progress in cleaning up the screen size mess
2009-12-22 06:02:53 +00:00
4a7b8f8246
don't look up aux function info when we don't have it
2009-12-21 14:07:43 +00:00
Bill Currie
Jeff Teunissen
Antti Harri
Ragnvald Maartmann-Moe IV