Statistics control: things count was not updated when adding or deleting things.
Map Analysis mode: "Check texture alignment" is now disabled by default.
Updated Inno Setup script and images.
Added DirectX web installer to Builder\Setup.
Updated MakeRelease.bat.
Updated ZDoom_DECORATE.cfg.
Fixed, Nodes Viewer Mode: the mode was unable to handle missing node lumps properly.
Fixed, Nodes Viewer Mode: the mode no longer builds nodes when unable to find both classic nodes and ZNODES at the same time.
Removed SlimDX installer, because it's no longer required.
Internal: debug console is now cleared when opening a map.
Internal: changed the way apppath is acquired. It should no longer fail when launching the editor from a shared network folder.
Main Form: changed some labels of dynamic light and model rendering selectors to be less confusing.
Updated ZDoom_DECORATE.cfg.
Game configurations, Line Identification action: added "Front side only" (128) flag to arg1.
Game configurations, Line Identification action: renamed arg1 flags to match corresponding UDMF flag names.
Updated udmf_zdoom.txt.
Fixed, Fit Textures action: vertical texture offset of a middle part of double-sided linedef with "Lower unpegged" flag was calculated incorrectly.
Fixed, Fit Textures action: texture offsets were calculated incorrectly when using the action on several groups of connected walls at once with "Fit across connected surfaces" enabled.
Fixed, Visual mode: middle parts of double-sided linedefs were not rendered when ScaleY was negative.
Updated ZDoom_DECORATE.cfg.
Visual mode: removed "Fit Texture's Width" and "Fit Texture's Height" actions.
Visual mode: "Auto-align texture offsets" actions were incorrectly aligning double-sided middle walls in some cases.
Visual mode: "Auto-align texture offsets" actions now align non-wrapped double-sided middle walls to vertical offset closest to their initial vertical offset.
Visual mode: middle parts of double-sided walls were ignored when Shift-selecting walls.
Nodebuilders/Game configurations: GL nodes definitions were missing from game configurations.
Nodebuilders/Game configurations: "~MAP" wildcard can now be a part of a lump name.
Nodebuilders: GL nodes were not properly handled by the editor.
Main Window: the window is now moved into the view when stored position is ouside of screen bounds.
Classic and Visual modes: changing thing pitch was ignored in some cases.
Visual mode: raising and lowering a thing with "+SPAWNCEILING" flag now works the same way as when raising/lowering a regular thing.
Visual mode: using "Raise/Lower Floor/Ceiling to adjacent sector" actions on a thing with "+SPAWNCEILING" flag now works the same way as when using them on a regular thing.
Rendering: even more fixes to MODELDEF and UDMF properties-related model rendering logic.
Internal, ResourceListEditor: rewritten resource validation check in a more OOP-ish way.
Configurations: fixed an infinite loop crash when a file was trying to include() itself.
UDMF thing flags: added Skill 6-8 to the flags list (because there are thing filters for these).
ZDoom_ACS.cfg: added definitions for SetTeleFog and SwapTeleFog.
ZDoom_DECORATE.cfg: added definitions for A_SetTeleFog and A_SwapTeleFog.
Updated ZDoom ACC.
Updated documentation.
Resource List Editor: not existing resources are now shown using different color.
Map Options, Open Map Options, Game Configurations windows: a warning is now shown when a map resource doesn't exist.
Some minor fixes to Resource List Editor's context menu.
Updated ZDoom_DECORATE.cfg.
Bit Flags form now changes width to show flags with long names without scrolling.
Bit Flags form: flag numbers are now shown as well as names.
Game configurations: updated Hexen and ZDoom linedef definitions. Now they (hopefully) fully match ZDoom ones.
Action Selector Control: fixed a crash when trying to increase action above maximum value using mouse wheel.
Sector/Linedef/Thing tag lists are now handled by corresponding TypeHandlers (and not by dirty hacks as before).
Linedef info panel: line peggedness labels were obscured by effect label in Doom/Hexen map formats.
Cosmetic changes in Sector Info Panel and Thing Browser Control.
ArgumentInfo: fixed a crash when enum specified in a game configuration doesn't exist.
Updated Hexen and ZDoom linedef configs.
Updated ZDoom_DECORATE.cfg
Texture browser form: added "Long texture names" check-box. It can be used to toggle between displaying long and short texture names.
Texture browser form: added "Show image size" check-box.
Texture browser form: image size is now shown differently.
Image Selector: added a button to toggle between long and short texture name.
Linedef info panel: long texture names are now displayed properly.
Sector info panel: long texture names are now displayed properly.
Fixed: "Save Screenshot" and "Save Edit Area Screenshot" actions were triggered multiple times when a child window was open.
Fixed: used textures should be always updated after using "Change map in current WAD" action.
Fixed, "Change map in current WAD": fixed a crash when trying to switch from a map with missing game configuration path.
Updated ZDoom_ACS.cfg.
Open Map in Current WAD: resources are now reloaded when current and target map's resources don't match.
Added some boilerplate to UniversalParser and PK3FileImage.
Internal: ImageSelectorControl now has "UsePreviews" property.
Internal: added ConfigurablePictureBox.
Updated ZDoom_DECORATE.cfg.
Textures Browser form: PK3/Directory TEXTURES images are now shown in a separate folder in the resources tree.
Fixed, Textures Browser form: fixed a logic error when trying to select initial flat when mix textures & flats was disabled in the current game configuration (this resulted in the blank textures list after opening the form).
Fixed, Textures Browser form: resources tree showed textures count even when browsing flats.
Fixed, Textures Browser form: PK3/Directory textures took precedence even when browsing flats (this means when there were a flat and a texture with the same name, a texture was displayed when browsing flats).
Fixed, Classic modes: actor's scale set in DECORATE was ignored when rendering models.
Fixed, MODELDEF parser: in some cases, several model definitions were skipped when trying to skip the current one.
Fixed, resource management: flat and sprite TEXTURES definitions were loaded only from TEXTURES files named "TEXTURES".
Fixed/added, PK3/folder resource management: patch locations for sprites defined in TEXTURES are now checked the same way as in ZDoom (previously only the "sprites" folder was checked).
Fixed/added, PK3/folder resource management: patch locations for textures defined in TEXTURES are now checked the same way as in ZDoom (previously only the "textures" folder was checked).
Fixed, PK3/folder resource management: flats defined in TEXTURES were not added to the global Flats image list.
Fixed, PK3/folder resource management: in some cases, the image search algorithm could find flats, textures, patches or sprites in incorrect folders (for example, it could find a flat in "flats_backup" folder).
Game Configurations: moved "thingflagscompare" from Game to Map format blocks. "Check stuck things" check now works properly in Doom/Boom game configurations.
Map Analysis: fixed a possible crash during "Check texture alignment" check.
Map Analysis: ResultStuckThingInLine now highlights both thing and line.
Map Analysis: ResultStuckThingInThing now highlights both things and allows to delete any of them.
Internal, Map Analysis: rewritten parts of "Check stuck things" class.
Internal, Map Analysis: changed the way processed stuff is stored in "Check texture alignment" class.
Internal: changed CurrentDomainOnUnhandledException, so ExceptionDialog with proper info shows up even if adding exception to the Event Log failed.
Internal: changed format, in which thingflagscompare info is stored.
Map Analysis form: error checks are now alphabetically sorted.
Map Analysis form: added "Toggle All" check box.
Internal: CheckboxArrayControl now has Sort() method.
More fixes in ZDoom_DECORATE.cfg
Linedef Edit Form, UDMF: missing activation flags warning is now displayed only for linedef actions with "requiresactivation" property set in a game configuration.
Game configurations: fixed a couple of property names, added more enums & default values.
Updated BCC compiler to rev. 20140818r2.
Game Configurations: changed default map name for Doom maps to "E1M1".
New Map Form: "E1M1" is now used as a default name for Doom maps.
Thing Browser Control: double-click event is now sent only if user clicked in the node's label area.
Interface: added info messages for several toolbar toggles.
Interface: made Brightness icon more readable when using dark windows themes.
BCC script compiler (https://github.com/wormt/bcc/) is now bundled with GZDB.
Main Form, "File" menu: only existing files are now added to the "recent files" list.
Preferences: added "Capitalize texture names" option (located in Preferences -> Appearance -> Additional options). When disabled, the casing of displayed texture names will match filenames for textures loaded form TEXTURES or pk3/pk7/folder resources.
Textures Browser: added support for displaying long texture names.
Errors list is now cleared when reloading resources.
Visual mode: added basic support for sector slopes (no UI for that feature yet).
Changed "Raise Floor by 8 mp" and "Lower Floor by 8 mp" default shortcuts to "Ctrl-Alt-ScrollUp/ScrollDown", because they used the same keys as "Increase Brightness" and "Decrease Brightness" actions.
Snippets: changed token syntax from $XX to [XX]
[LB] (Line Break) marker can now be used in snippets.
Game Configurations: added "enabledbydefault" parameter. When set to true, a game configuration will be available by default (e.g. when an user starts the editor for the first time).
GZDB will no longer throw an exception when trying to update default value in a TypeHandler, which doesn't implement default value handling.
Make Door action: door and track textures are now stored while the editor is running.
Edit Selection Mode: pasted geometry was not merged with the rest of the map if the selection was not modified before applying the mode.
Make Door action: made Make Door form a bit smaller.
Make Door action: sector highlight was not updated after performing the action when a single sector was selected.
When you try to change floor/ceiling texture offsets in Doom/Hexen map formats, a warning is displayed in status bar (instead of spamming you with message windows).
Mode actions toolbar is now auto-hidden when there are no buttons to display.
Game Configurations: added "fixedrotation" property to "Polyobject Anchor" (9300), "Polyobject Start Spot" (9301), "Polyobject Start Spot (crush)" (9302) and "Polyobject Start Spot (hurts to touch)" (9303) actors.
Color Picker plugin: moved plugin button to "Modes" toolbar group.
API: added ToolbarSection.Modes property, which can be used in MainForm.AddButton() to add a button to Modes group.
Removed a bunch of unused variables.
When no configuration is enabled, a message was supposed to be shown after startup. Now it actually shows up.
Several configurations were missing from the "Configurations" folder.
Configurations: all 64 game configuration are now available by default.
Game Configurations window: game configurations can now be disabled. This setting is mostly cosmetic. When a game configuration is disabled, it won't be shown in "game configuration" dropdowns in New\Open Map Options and Map Options windows. If a map's .dbs file specifies a disabled configuration, it will be picked as a map configuration anyway.
Linedefs mode: vertex insert preview logic used Highlight range instead of Stitch range (which is used when draw mode engages).
Visual mode: double-sided middle textures were not selected when using "Select" action with "with same texture" modifier.
Textures: some optimizations in patch blending code.
ZDoom ACS script configuration: added definitions for StrLeft, StrMid and StrRight functions.
Map Analysis mode: "Check overlapping lines" now finds duplicate linedefs (e.g. when 2 lines have the same start and end positions).
Map Analysis mode: added "Check overlapping vertices" check. This will check if a vertex is on top of a linedef or another vertex.
Some cosmetic changes in Tools and BaseVisualMode.
Updated zspecial.acs
Linedefs mode: event arrows were not redrawn after updating vertex insert indicator.
Configurations: some titles were too long to be displayed properly in the interface.
Numeric textbox: in addition to '++NN' and '--NN', you can use '*NN' and '/NN' to multiply or divide the values.
Configurations, ZDoom_linedefs.cfg: some linedef action arguments were missing a proper type.
Rewritten parts of hints system. Hints are now loaded from "Hints.cfg" file.
Reverted "Delete Item" action to the way it worked in DB2.
Added "Dissolve Item" action, which works the way "Delete Item" worked in previous revisions of GZDB.
Added "Auto Clear Sidedef Textures" action, "Edit" menu and toolbar button, which toggle automatic removal of sidedef textures when floor or ceiling height is changed or when geometry is drawn, copied or pasted.
Draw Settings panel: upper/lower texture overrides can now be used.
Draw Settings panel: added 2 sets of buttons, which allow to quickly set or clear textures in current selection.
Things are now rendered behind AND on top of the grid/linedefs/vertices when they are dragged.
Redesigned hints system. They are now shown in a side panel.
Edit area auto-focusing is now disabled when script editor is open.
Texture Browser form: no texture group was selected when opening the form in some cases.
Fixed several strange/misleading text messages.
Sectors mode: event lines were not rendered for things targeting highlighted sector.
Added "DropItem" and "CheckFlag" definitions to ACS and DECORATE script configurations.
Default sector ceiling height can now be set in Preferences.
Default sector floor height can now be set in Preferences.
Maximum number of recent files can now be changed in Preferences.
UDMF, Custom fields: a warning is now shown when a user tries to manually add a managed filed.
UDMF: "Translucent" linedef flag is now marked as obsolete.
"Snap Map Elements to Grid" mode now tries to fix invalid geometry after vertex snapping.
Vertices mode: in some cases not all vertices were removed when deleting vertices.
Removed "Load GZDoom light definitions" from preferences. If you want to use GZDoom's GLDEFS definitions, add "lights.pk3" as a resource.
Visual mode: fixed a crash when toggling GZDoom Geometry Effects (Tab)
Fixed sector bounding box calculation error.
Renamed "Edit -> Grid Setup..." to "Edit -> Grid and Backdrop Setup..."
Updated documentation
Increased maximum zoom level in Classic modes to 3000%.
Added "1 mp" option in grid size menu.
Added "400%" option in zoom menu.
Renamed "Toggle GZDoom rendering effects" action to "Toggle Geometry Effects".
Sync camera position: Visual Camera height is now changed only if camera is above or below current sector.
Classic modes: view was not redrawn after "Test map from current position" action.
"Test map from current position" action: incorrect player start was used when a map had several Player 1 Start things.
Script editor: pressing "F1" now opens keyword help instead of program manual.
Linedef edit form, Thing edit form: rewritten script support logic. It should now work in the same manner as the rest of controls.
Thing info panel: thing arguments now have proper labels.
Edit forms, UDMF: fields, which are handled by UI, are no longer shown in "Custom" tab.
Visual mode: fixed a crash when loading a model on a video card without Shader model 2.0 support.
Fixed incorrect argument number and changed most of labels in "Cameras and interpolation" section of zdoom_things.cfg.
Textures were not loaded properly from PK3/PK7 archives.
Visual mode: restored ability to remove textures using Delete action.
Visual mode: fixed several bugs in Cut/Copy/Paste things actions.
Visual mode: vavoom style 3d floors were not displayed properly.
Visual mode, 3d floors: added support for "RestrictLighting" (2) flag.
Visual mode, 3d floors: inner sides of 3d floors with "swimmable"/"render inside" flags used incorrect brightness value.
Texture scale controls now have "Link" button.
Thing, Sector (UDMF) and Linedef edit forms now work in realtime mode.
Some more fixes in Edit form realtime update stuff.
Removed some unused variables and functions.
Tag Statistics form: you can now double click on Sectors, Linedefs or Things cell to select them, and right click to open their properties.
Texture size labels were displayed incorrectly in some cases.
Rewritten VerticesMode.DeleteItem() once again...
Vertex Edit form now works in realtime mode.
Vertex Edit form: ceiling and floor vertex offsets can now be cleared.
Added StairSectorBuilder plugin (I suppose some external plugins will stop working in GZDB because I've changed ButtonStep to float in ButtonsNumericTextbox a couple revisions ago...).
Preferences form: action description is now scrollable.
Changed background color of Sector Edit form.
Vertex' ZCeiling and ZFloor properties are now managed internally.
Visual mode, UDMF: renamed "Rotate Thing Clockwise" and "Rotate Thing Counterclockwise" actions to "Rotate Clockwise" and "Rotate Counterclockwise". These actions can now be used to change rotation of floor/ceiling textures.
Visual mode, UDMF: "Reset Texture Offsets" action now also resets sidedef's scale and floor/ceiling's scale and rotation.
Visual mode, UDMF: control line's OffsetX and OffsetY were not taken into account when calculating texture offsets of 3d floors' sides.
Visual mode, UDMF: fixed a ton of bugs in Auto align functions.
Visual mode, UDMF: when using "Move Texture Left/Right/Up/Down by 1" actions texture offsets were not updated properly when texture's scale was < 1.0.
Visual mode, UDMF: OffsetX and OffsetY were not taken into account in "Fit Texture Width/Height" actions.
Dockers Panel: added Pin/Unpin button, which acts the same as "Preferences -> Interface -> Side panels -> Auto hide" checkbox.
Texture size labels can now be disabled by unchecking "Preferences -> Interface -> Show texture and flat sizes in browsers" checkbox.
Texture size labels now are not shown for unknown textures.
Most of texture size labels had incorrect bg color.
ZDoom_linedefs.cfg: action specials 223 and 224 had incorrect Arg0.
