segfault if your first call was with "". Probably could cause
crashes too
- add a string.c file to libQFutil, with a Q_strcasestr function,
which strcasestr is defined to if it's not already defined. (we'd
get that with glibc if we defined __USE_GNU, but we don't)
- make client_t and SV_ExtractFromUserinfo both use NAME_MAX for
their name arrays, instead of 32 for one and 80 for the other
- rewrite almost all of SV_ExtractFromUserinfo's name handling.
- \r, \n, and \t are all converted to spaces
- leading/trailing spaces are stripped
- consecutive spaces are reduced to a single space
- empty names are considered bad
- user-* nicks are considered bad (unless forced to them)
- a name containing console or admin is considered bad
- a name that already exists is considered bad
- if they have a bad name it gets forced to user-%d, where %d is
their userid
- netname in the progs is now updated properly
- name changes are always reported unless it's the initial setting,
rather than only if they're full connected and not a spectator
- finally, if the name change fails (info string exceeded), give
them the boot. (before this was only done for duplicate names)
That's about it :)
of pre-registered (Sys_RegisterShutdown) function before actually exiting
the program. This should take care of the pain when an ncurses server
crashes.
value
- switch some prints over NUM_FOR_BAD_EDICT
- change NUM_FOR_EDICT to call PR_RunError on error, instead of
PR_Error. That was it prints out a backtrace.
(I did it in reverse order ;)
(Sys_DPrintf is new) is now used exclusively for all lib printing. Con_Init
sets the sys printf recirection to Con_Print (which has been revamped
appropriatly) and the server sets it to SV_Print (which was SV_Printf and
the new SV_Printf calls /it/). This should fix the rcon print redirection
issues.
IMT_DEFAULT to the bottom of the list so that IMT_0 gets written as such
rather than IMT_DEFAULT.
Also, clean up nq's EF_* dlight creation a bit (haven't touched
EF_MUZZLEFLASH: undecided on what to do).
Less blinding rocket trails is probably the most noticable change, other than a nice speedup in nq timedemos. Little change for overkill, though. Aw...
as the black polygons (duh:) and not as nice looking as the sky dome, but also
not as slow (fps when standing in the normal coridor looking at the sky in
start: 26 for skydome, 37 for id skys, 44 for black). Good for when you want
to see sky other than black but your card can't handle the fillrate
requirements of skydome. I'll clean up the sqrt in there soonish.
networking support.
Second, I moves keys.c from qw and nq to libs/video/targets when I did
the next thing.
Existing user configs which do binds, sledge hammer. Sledge hammer,
existing user configs which do binds. *WHACK* *WHACK* *WHACK*
See, much nicer now.
Someone should document it, and fix all targets which don't use SDL for
input. (I honestly don't expect svgalib and the like to ever be fixed.)
R_MarkLights is now about 3% instead of about 15%, I've lost 8 fps on my
null GL speed test. However, R_AddDynamicLights has jumped up a bit, so I'm
wording if maybe more surfaces are being lit.
generice, and also more in line with the rest of quake's clipping system
(ie, support the entity size selected hulls). I'm not /entirly happy with
what's here, but it's a start, and the force fields in customtf work /much/
better :)
integer constants and float function args/return values.
pr_comp.h:
o add the integer opcodes to pr_opcode_e
pr_edict.c:
o add "quaternion" and "integer" to type_name[]
o support quatnernion and integers types when printing values
o support the integer opcodes when bounds checking
pr_exec.c
o enable the integer opcodes
pr_opcode:
o add the integer opcodes to the opcode table
o logical operators all result in an integer rather than a value
expr.h:
o rename int_val to integer_val
qfcc.h:
o kill another magic number
expr.c:
o move the opcode to string conversion out of type_mismatch and into
get_op_string
o rename int_val to integer_val
o general integer type support.
o generate an internal comipiler error for null opcodes rather than
segging.
pr_imm.c:
o rename int_val to integer_val
o support integer constants, converting to float when needed.
pr_lex.c:
o magic number death and support quaternions and integers in type_size[]
qc-lex.l
o rename int_val to integer_val
o support quaternion and integer type keywords
qc-parse.y:
o rename int_val to integer_val
o use binary_expr instead of new_binary_expr for local initialized
variables
builtins.c:
o rename int_val to integer_val
o fix most (all?) of the INT related FIXMEs
defs.qc:
o use integer instead of float where it makes sense
main.c:
o read_result is now integer rather than float
main.qc:
o float -> integer where appropriate
o new test for int const to float arg
enable the cd_data_t entry so func and data structures are consistent.
cd.h:
create cd_data_t (empty)
console.h:
better understanding of how these things work :)
api change: Cmd_Args () now takes a parameter inidcating which arg to
start at for grabbing the un-parsed command line
qw/source/sv_ccmds.c:
implement kk's tell command and user name matching (though # is used for
the wildcard and it's still case sensitive)
everything else:
adjust for the new Cmd_Args protype
implementation of his sound/focus patch. NOTE: only alsa 0.9 is tested
(Rhamph, can you test 0.5, please?) and only the alsa drivers stop the
hardware right ow.
WARNING!!! you /will/ have to re-install your plugins, or you will get
segfaults when the window gains/loses focus.
How do you tell if a window has focus on first mapping in X11?
remove include of glob.h. not needed and causes win32 build to fail
plugin.c:
include compat.h and cast the return of GetProcAddress
gl_funcs.c:
fix parse error and type mismatch
qfgl_ext.c:
half re-write QFGL_ExtensionAddress to use QFGL_ProcAddress
vid_wgl.c:
fix for the new gl linking
Sys_Printf still has the format attribute. To redirect Sys_Printf, declare the
redrecting function as void (const char *, va_list) and call Sys_SetPrintf
with this function as its parameter.
way.. Sys_Printf is now Sys_StdPrintf for now. Sys_Printf is a function
pointer and will end up replacing Con_Printf as well. Names will change
to something intelligent when I'm done. Win32 is not yet touched, but I
haven't forgotten it.
The reason for this is the assumption that Con_Printf and Sys_Printf do
not overlap. The new server console WILL change that, requiring that we
change how we handle both functions. The plan: Default to using stubs
and swap them for full-featured functions on Console init which do all
the things we expect. Will also do a stderr version later.
The major change is that we no longer require libGL to even exist on the
system at compile time for the GL targets, we dynamicly link to the
libGL of choice at run time. (This probably breaks most non-linux
systems, and all GL targets except -glx, some fixup will be needed.)
(This also kills glquake, dead dead DEAD! GONE FOREVER! WHEE!)
Some gl_draw cleanup.
Commented out equake alias model occlusion test stuff, very experimental.
Added the .lo and .la patterns to the .gitignore files.
Some minor sbar cleanup. (We don't use the disc in use symbol for
anything.)
(and thus have a new simpler PL_ObjectForKey() function to get a value for
a key). Also, you can now call PL_FreeItem() on a plitem_t to free a
property list item and all of its descendants (if it has any).
Binary plist values are still not supported.
define PROG_ID_VERSION as 6 and redefine PROG_VERSION as 0x00fff001
(0.fff.001) for the new qc features.
pr_edict.c:
support version 6 and version 0.fff.001 progs
qfcc.h:
add version field to options_t
add min_version field to opcode_t
pr_opcode.c:
set the minumum version of each opcode (gee, that table is getting ugly)
filter out opcodes with too high a min_version when initializing the opcode
hash tables.
qfcc.c:
update help output.
accept --id to limit code generation to id compatable (ver 6) progs.
default progs generation to 0.fff.001
add no_exec_limit field. Set to 1 to disable the runaway loop check
for unlimited runs (eg, in qwaq)
pr_exec.c:
don't bother checking the profile counter if pr->no_exec_limit is set
pr_strings.c:
free unreferenced dynamic strings rather than referenced.
add OP_ADD_S. WARNING!!! this /will/ move.
progs.h:
add prototype for PR_PrintStatement
pr_edict.c:
add OP_ADD_S support in the progs checker
pr_exec.c:
implement OP_ADD_S
tools/qfcc/include/.gitignore:
add config.h.in
qfcc.h:
nuke PR_NameImmediate and change PR_ParseImmediate's prototype (see
pr_imm.c)
pr_comp.c:
add ADD_S, adjust for PR_ParseImmediate's prototype, make
PR_ParseExpression work with non-sequential opcodes (slow, will work on
that next). Fix up initialised global parsing.
pr_imm.c:
nuke PR_NameImmediate. didn't work well and wasn't such a good idea anyway.
PR_ParseImmediate now accepts a def_t * arg. if null, will allocate a
new global def, otherwise it will initialize the def passed in.
qwaq/main.c:
sports some debugging code (dumps info about the progs it's running)
qwaq/main.qc:
better ADD_S testing
create a field_offset macro that takes a structure type and a field and
returns the offset of the field within the structure
everything else:
use field_offset to calculate the size of variable sized structs
quakeio.h -> vfile.h
More diff reduction between trunk and my VFS code. Also took the time to
put some headers in order and fix a few #include's pointed out by moving
things around a bit.
add a crc field to aliashdr_t
model_alias.c:
set it for all models
cl_parse.c:
set the pmodel and emodel info keys to the crcs of the player and eye
models
Don't bother checking vid_gamma for CVAR_ROM becuase it is impossible to
get to VID_UpdateGamma when it is set except for when the cvar is
initially created, and we /want/ the code to execute in that case.
vid.h:
add initialized to viddef_t
vid_common_gl.c:
actually /use/ gammatable (it tends to help)
vid_*.c:
clean up rendundant decls of gammatable, vid_initialized (now
vid.initialized) and make sure vid.initialized gets set.
gl_view.c:
remove gammatable decls
out into r_graph.c (Time and Z graph), cl_ngraph.c (Net graph), and
{gl,sw}_graph.c (R_LineGraph). gl_ngraph.c is gone. Unfortunatly, something
is rather wrong with NetGraph in gl (probably R_LineGraph).
thinking :)
set fs_pluginpath to point to the right dir, and set snd_plugin to pick a sound
plugin.
Current issues:
- alsa 0.5 won't build properly, dunno why
- segfault on exit. I think I know the cause of this, and how to fix it
- alsa 0.9, gus, sgi, sun, and win32 havn't been tested
r_local.h, r_shared.h, client.h and render.h at the same time (couldn't get
away from that:/) verly likely to be lots of breakage (eg, player and eye
models are NOT checksummed atm), but everything builds
glquake.h to mathlib.h (along with the declaration for frustum) and the
extern inline keyworws protected by an ifndef so that mathlib.c can cause
R_CullBox to be compiled publicly. The definition of frustrum has been moved
from its verious locations into mathlib.c.
gl_draw.c: Fixing gl_lightmode 1.
gl_dyn_part.c:
Fixing gl_lightmode 1.
Fixed word wrapping on comments.
Switched to using the new vertex array setup.
gl_rmisc.c: New vertex array setup.
varrays.h: New vertex array setup.
it seems somebody forgot to commit this. just compied direct from qw
libs/video/targets/.gitignore:
better ignore rules
nq/source/Makefile.am:
libqfsys.a is dead :)
the rest:
gamma compile fixes
remove includes of qdefs.h and compat.h
pr_comp.h:
merge pr_comp.h from quake and qfcc, removing the copy in qfcc
cmdlib.[ch]:
nuke the endian code.
qendian.c:
initialise the LittleLong etc pointers at compile time rather than run
time
com.c (both nq and qw):
nuke the LittleLong etc init code
everything else:
fix up after the qtypes.h cleanup
external to the progs file are now malloced and then freed at progs reload.
All that needs to be implementd for gc to work is the scanner and deallocator.
slight api change: the getkey and free functions now take a user data
parameter (which is an aditional parameter to Hash_New.
cmd.c, cvar.c, quakefs.c:
clean up the resulting errors.
pr_edict.c:
use hash tables for lookups of function, global and field definitions.
should speed things up a bit, ESPECIALLY when type checking is enabled.
thinks:
o Full progs modularity
o CSQC should now be just a matter of creating the builtin functions and
loading the code.
o total independence from progs globals, functions and entity field layouts
on the conditoin that their definitions have not been stripped from the
progs file.
o optional (though currently forced on) type checking on access to progs
entity fields from C
o the progs engine is fully shared between nq and qw.
progs globals and edict fields accessors, but I'm not so sure that's the cause
of the run-time error:
SV_Error: SV_ModelIndex: model progs/player.mdl not precached
Fatal error: SV_Error: SV_ModelIndex: model progs/player.mdl not precached
I suspect I failed to find the spawn function.
nq for abyss etc (ie, the magical -<mod> args).
The interface to the message subsystem got a revamp and all the mods to the .c
files reflect this. currently a little ugly, but I plan on abstracting msg
further to clean it up and make it more oo.
checksum.c) and then move the resutlting checksum.c into libs/utils
ditching nq's. Due to net_com.c, qw's libqfnet.a will need to be deleted or
you will get duplicate symbol link errors. Also merge crc.[ch] and move
qfplits.[ch] to their final homes. Also, remove a slightly overzealous use
of "static" in qfplist.[ch].
