Note: I'm not really sure whether I'm initializing it in the right places.
git-svn-id: https://svn.eduke32.com/eduke32@2429 1a8010ca-5511-0410-912e-c29ae57300e0
When drawing from inside the mirror, there may be no 'bunches' (BUILD lingo,
not TROR ones) collected, but following code used the first one unconditionally.
git-svn-id: https://svn.eduke32.com/eduke32@2427 1a8010ca-5511-0410-912e-c29ae57300e0
Hlines for masked and translucent masked ceiling/floor (sprites).
- apply the --> 'do { ... } while (--cnt)' transformation, making these
functions iterate cnt+1 times like the asm version. This also fixes an
off-by-one issue where sprites or masked ceilings/floors had a one-pixel
non-drawn line to the right.
- This time, only declare-as-local two 'extern' globals (asm1 and asm2).
It seems that I was too eager with "localing" all file-scoped vars earlier.
GCC is able to remove the loads from memory inside the loop by itself, whereas
clang is not. This is not trivial, since it has to prove that the 'screen'
pointer passed to the functions will never alias these globals.
git-svn-id: https://svn.eduke32.com/eduke32@2424 1a8010ca-5511-0410-912e-c29ae57300e0
The apparent horizon (in units proportional to pixels by a constant factor)
was being calculated without normalizing to viewingrange, resulting a
discrepancy between the drawn and actual up/down angle with non-default
viewingranges (e.g. with r_usenewaspect=1, or when setting it from setaspect).
This also means that the center-of-aim will now be the same regardless of
the aspect.
This fixes many derived bugs:
* inconsistency w/ crosshair when shooting a gun and aiming up/down (obviously)
* bugs resulting from being able to look up/down too far (garbage non-slope
texture-mapping and viewing BIGORBIT skies above the borders in classic).
Note: mods that had workaround logic for this bug will have to remove it...
git-svn-id: https://svn.eduke32.com/eduke32@2414 1a8010ca-5511-0410-912e-c29ae57300e0
This has no measureable difference. Oh well, maybe it benefits weaker
machines, since the generated loop code should definitely be prettier.
git-svn-id: https://svn.eduke32.com/eduke32@2408 1a8010ca-5511-0410-912e-c29ae57300e0
This doesn't give much, maybe 0.5 fps more, probably because the
loop body is pretty long.
git-svn-id: https://svn.eduke32.com/eduke32@2406 1a8010ca-5511-0410-912e-c29ae57300e0
Affected functions: hlineasm4, vlineasm1, mvlineasm1, tvlineasm1.
Optimizations:
- declare all used variables as possibly const-qualified locals in each
function. This removes unnecessary loads from memory in the loops.
- rewrite "for (; cnt>=0; cnt--) {...}" to "cnt++; do {...} while (--cnt);"
in the three last ones (yes, these function iterate cnt+1 times). This
makes them functionally equivalent to the asm versions (madness ensues for
cnt < 0) and allows the compiler to remove one 'test' instruction at the
end of each loop.
- in the translucence function, replace addition by ORing
Observations (system: Core2 Duo Linux x86_64):
With a 1680x1050 window fully covered by the respective type of wall (simple,
masked, trans. masked), fps increases by 3-4 from the baseline of approx. 60.
git-svn-id: https://svn.eduke32.com/eduke32@2405 1a8010ca-5511-0410-912e-c29ae57300e0
- remove the objects too on 'clean'
- fix warning with 'transpal' on x64
(generates translucency and shade tables)
git-svn-id: https://svn.eduke32.com/eduke32@2404 1a8010ca-5511-0410-912e-c29ae57300e0
- print compilation status for building the final executable
- add 'cleanutils' target in build/Makefile
- don't link against pthread, seems unnecessary
- don't build nedmalloc.o when not requested in Makefile.common
git-svn-id: https://svn.eduke32.com/eduke32@2403 1a8010ca-5511-0410-912e-c29ae57300e0
It needs to have the sound quality box removed and the Game directory box added, possibly among other things.
git-svn-id: https://svn.eduke32.com/eduke32@2396 1a8010ca-5511-0410-912e-c29ae57300e0
(Classic renderer). We don't need 64-bit integers; also use the nice
asm version of divscale32() if possible.
git-svn-id: https://svn.eduke32.com/eduke32@2390 1a8010ca-5511-0410-912e-c29ae57300e0
This was discovered because viewscreens (TILE_VIEWSCR) ceased being drawn
with the MAXTILES increase (reported by Hank, who also did the bisect).
git-svn-id: https://svn.eduke32.com/eduke32@2376 1a8010ca-5511-0410-912e-c29ae57300e0
That is, everyplace a user input is to be converted. The only remaining
instance of atoi() is now atoi(s_buildDate).
git-svn-id: https://svn.eduke32.com/eduke32@2374 1a8010ca-5511-0410-912e-c29ae57300e0
Internally, the last argument to neartag is now a pointer to a function
int32_t (*blacklist_sprite_func)(int32_t i),
which is supposed to return 1 if sprite[i] should NOT be considered for hitting.
This is now used in the hard-coded neartag() calls in sector.c, but not in any
way in CON (there's neither a C blacklist function provided, nor is there a
possibility to define one in CON). There, all sprites with picnums >=1 and <=10
(i.e. the effectors) will be blacklisted. This remedies problems where such
sprites would get in the way of switches.
Note that a whitelist approach (only consider a predefined set, namely those
picnums which will be checked afterwards) has back-compatibility implications
since people may have used e.g. lotagged window sprites to cover a switch.
Also, the >=1 to <=10 range is [sic] (the static, not dynamic values are used),
since anyone redefining effector picnums is clearly out of their mind.
git-svn-id: https://svn.eduke32.com/eduke32@2373 1a8010ca-5511-0410-912e-c29ae57300e0
lzwcompress can access one byte after lzwrawbuf[LZWSIZE] when provided with
an uncompleng of LZWSIZE, so we increase that array's size by one.
git-svn-id: https://svn.eduke32.com/eduke32@2369 1a8010ca-5511-0410-912e-c29ae57300e0
Remove dfread and kdfwrite, only leave a recipe how to get their
source from the respective used functions.
git-svn-id: https://svn.eduke32.com/eduke32@2368 1a8010ca-5511-0410-912e-c29ae57300e0
The following functions have const qualifiers attached for the 'destination'
arguments: kdfwrite, dfwrite in cache1d.c and copybuf{byte,reverse,} in the
pragmas source or headers. A couple uses of the latter ones were replaced
with calls to standard library functions.
git-svn-id: https://svn.eduke32.com/eduke32@2361 1a8010ca-5511-0410-912e-c29ae57300e0
This is useful to debug out-of-bound violations for memory allocated
with that function.
git-svn-id: https://svn.eduke32.com/eduke32@2360 1a8010ca-5511-0410-912e-c29ae57300e0
This makes more sense because the game selector draws the names with uppercase
letters and the hotkeys to jump to a map starting with a particualar letter
aren't case sensitive, either. Mapster32's selector will still display maps
starting with upper case first.
git-svn-id: https://svn.eduke32.com/eduke32@2356 1a8010ca-5511-0410-912e-c29ae57300e0
The bulk are whitespace changes; the only exception is a
"if (expr) { stmt; }" --> "if (expr) stmt;"
git-svn-id: https://svn.eduke32.com/eduke32@2353 1a8010ca-5511-0410-912e-c29ae57300e0
The reason was that drawmasks(), which was where the resetting of the fake
RoR textures happened under Polymer, can be called from polymer_displayrooms()
when mirrors are present. I was assuming that drawmasks() was only ever called
after the 'main' drawrooms and that hence the sequence of fake RoR tile tweaking
was set, reset, set, reset, ... which it was not.
Now, do the resetting explicitly after every drawmasks() in the editor.
git-svn-id: https://svn.eduke32.com/eduke32@2350 1a8010ca-5511-0410-912e-c29ae57300e0
I find this cleaner for two reasons. First, lotags won't get in the way of
neartag(), so that doors and switches near constrained TROR walls can be
pushed. Second, this removes the information leak so that CON coders aren't
tempted to read that values directly before a proper API for that comes along.
When writing out a map in-game (e.g. with dndebug), restore the respective
members so that it can be loaded in the editor again.
git-svn-id: https://svn.eduke32.com/eduke32@2349 1a8010ca-5511-0410-912e-c29ae57300e0
getzrange() returns the floor rather than the sprite if their heights are
equal. Now, make an exception for extended floors (analogously, ceilings).
git-svn-id: https://svn.eduke32.com/eduke32@2347 1a8010ca-5511-0410-912e-c29ae57300e0
- guard cansee() against negative sectnums (return 0 immediately), since
it's often called with the player sectnum as one argument
- in resetpspritevars(), don't inset APLAYER sprite if sectnum < 0, which
can happen if a map is started in void space accidentally (e.g. from
the editor)
- two checks before accessing sector[] with a player sectnum
git-svn-id: https://svn.eduke32.com/eduke32@2342 1a8010ca-5511-0410-912e-c29ae57300e0
Internally, there's a new function fade_screen_black() that implements the
fading more efficiently than calling rotatesprite for classic, and uses
tile 0 (assumed to have at least 64x32 size) in the GL modes.
The black background of the user map selector is still done with rotatesprite
and tile BLANK in every renderer.
git-svn-id: https://svn.eduke32.com/eduke32@2312 1a8010ca-5511-0410-912e-c29ae57300e0
So that the game won't exit if you write 'vidmode 4' when intending
'setrendermode 4'.
git-svn-id: https://svn.eduke32.com/eduke32@2311 1a8010ca-5511-0410-912e-c29ae57300e0
The implementation uses the recently introduced updatesector_onlynextwall when
setspritez fails.
git-svn-id: https://svn.eduke32.com/eduke32@2302 1a8010ca-5511-0410-912e-c29ae57300e0
for an assertion failure with clang. Really ought to file a bug report instead.
git-svn-id: https://svn.eduke32.com/eduke32@2292 1a8010ca-5511-0410-912e-c29ae57300e0
It looks like GCC doesn't honor the 'used' attribute with LTO. This is
"fixed" by declaring the variables in question with external linkage
(i.e. removing the 'static'). I consider such behavior a GCC bug, though.
git-svn-id: https://svn.eduke32.com/eduke32@2286 1a8010ca-5511-0410-912e-c29ae57300e0
Internally, updateanimation() now takes a third parameter 'lpal'.
git-svn-id: https://svn.eduke32.com/eduke32@2277 1a8010ca-5511-0410-912e-c29ae57300e0
This may fix compilation for optimized builds with GCC or clang where
the compiler would otherwise decide that those symbols are unused.
git-svn-id: https://svn.eduke32.com/eduke32@2271 1a8010ca-5511-0410-912e-c29ae57300e0
If enabled, this makes the following arrays be allocated statically:
spriteext, spritesmooth, sector, wall, sprite, tsprite, while
necessarily disabling the clipshape feature (because it relies on
setting sector/wall to different malloc'd block temporarily).
To compile, pass DEBUGANYWAY=1 in addition to RELEASE=0 to 'make',
and it's really only useful with CC=clang, of course.
git-svn-id: https://svn.eduke32.com/eduke32@2270 1a8010ca-5511-0410-912e-c29ae57300e0
I'm decreasing EXTRATILES because I feel that it's way overcommitted. It's the
max number of model-tiles that have their own skin for a certain palette,
like the slimer egg in the HRP.
git-svn-id: https://svn.eduke32.com/eduke32@2267 1a8010ca-5511-0410-912e-c29ae57300e0
- fix one bound-checking line
- rewrite two lines in astub.c to potentially not overflow an int16
- make tiletovox[] an array of int16's
git-svn-id: https://svn.eduke32.com/eduke32@2266 1a8010ca-5511-0410-912e-c29ae57300e0
Always malloc that buffer. This allows us to remove suckcache() from
cache1d.c, which I believe to be buggy (see comments in the source).
git-svn-id: https://svn.eduke32.com/eduke32@2261 1a8010ca-5511-0410-912e-c29ae57300e0
- 'whitecol' was defined in the engine and in build.c, use only the engine one
- make cachesize, artsize, artversion static in engine.c
- undo some formatting havoc presumably done by astyle
git-svn-id: https://svn.eduke32.com/eduke32@2260 1a8010ca-5511-0410-912e-c29ae57300e0
It is likely that this is the value it used to have at some point, because
the MAXTILEFILES macro equals 256 and is as old as the Duke3D source.
loadpics() now refuses to load an ART file with localtilestart or localtileend
out of bounds, or if localtileend<=localtilestart (i.e. no tiles in ART file, or
nonsense). Also, on 'invalid art file version', continue instead of returning.
Note: this does not increase the maximum number of tiles, which is still 15360,
it only gives a bit more freedom to arrange them (well, into more art files).
Also, I don't see what anyone keeps off from packing any number of tiles (from
1 to 15360) into an art file. Old EDITART limits?
git-svn-id: https://svn.eduke32.com/eduke32@2259 1a8010ca-5511-0410-912e-c29ae57300e0
The cause was a combination of many factors. First, Polymer requires the
start-drawing position to be inside the sector to draw (deviations lead to
incorrect drawing). This was violated by the game, because it interpolated
the current and next tic position without updating the sectnum, leading to
inconsistencies especially when passing through narrow sectors. Polymer
worked around it by doing an updatesector() each frame, however this works
poorly for maps with overlapping geometry such as SoS or RoR.
The solution to this is to add a new engine function,
updatesector_onlynextwalls(), which searches the sectors (via nextsector)
in breadth-first fashion instead of from 0 to numsectors-1, like updatesector
does when it fails for the *immediate* nextwall neighbors.
Internally, the breadt-first search helpers are moved into the engine.
git-svn-id: https://svn.eduke32.com/eduke32@2256 1a8010ca-5511-0410-912e-c29ae57300e0
so try and steal it back"), prevent calling IDirectDrawSurface_SetPalette()
with NULL arguments, causing a crash. It's happened for me on Vista, when
initially changing from 8-bit to 32-bit mode.
git-svn-id: https://svn.eduke32.com/eduke32@2255 1a8010ca-5511-0410-912e-c29ae57300e0
I didn't have much success in finding bugs using it, but it works
out-of-the-box on my setup, so it may be useful in the future.
git-svn-id: https://svn.eduke32.com/eduke32@2254 1a8010ca-5511-0410-912e-c29ae57300e0
The second one is passed to the 'mouseb' variable, but the game currently
can't map it since ud.config.MouseFunctions[] would have to be enlarged,
breaking savegame compatibility.
Works both for the Windows and SDL layers. For the latter, instead of using
the SDL_BUTTON_X1/X2 macro constants, I'm using 8 and 9, since that is what
SDL (and incidentally or not, xev) gives me for those buttons.
git-svn-id: https://svn.eduke32.com/eduke32@2252 1a8010ca-5511-0410-912e-c29ae57300e0
It turns out that with model interpolation, out-of-bounds frame numbers may
be generated with thinned out models, so disable it until I can sort out
what's wrong with it.
Also, minor code cleanup.
git-svn-id: https://svn.eduke32.com/eduke32@2251 1a8010ca-5511-0410-912e-c29ae57300e0
Also, for debugging builds, show this message from verbosity level 1 on.
git-svn-id: https://svn.eduke32.com/eduke32@2250 1a8010ca-5511-0410-912e-c29ae57300e0
the only visible change is that polymost_trytexcache (formerly two
instances of nearly duplicate code) now prints a diagnostic after
a cache miss. The one that one is most likely to encounter is
"r_downsize doesn't match", meaning that this setting likely differs
between Mapster and the game.
git-svn-id: https://svn.eduke32.com/eduke32@2248 1a8010ca-5511-0410-912e-c29ae57300e0
The syntax is as follows:
animsounds <anim> { frame1 sound1 frame2 sound2 ... }
<anim> has to be one of the tokens: cineov2, cineov3, RADLOGO, DUKETEAM,
logo, vol41a, vol42a, vol4e1, vol43a, vol4e2, or vol4e3, corresponding
to hard-coded Duke3D anims.
The frameN's (1-based frame numbers) have to be in ascending order (but not
necessarily strictly ascending, so that a frame may have more than one sound).
Example: for Duke3D's XBLA nuke logo animation (IVF extracted from nuke.webm),
the following definition overlays the video with a sound sequence similar
(identical save for timing) to the original nuke animation:
// frame 1: FLY_BY, frame 64: PIPEBOMB_EXPLODE
animsounds logo { 1 244 64 14 }
git-svn-id: https://svn.eduke32.com/eduke32@2242 1a8010ca-5511-0410-912e-c29ae57300e0
let it hang around causing trouble later on; delete it right now and inform
the user.
Add a couple of 'static's to some functions and file scope data in mdsprite.c
git-svn-id: https://svn.eduke32.com/eduke32@2237 1a8010ca-5511-0410-912e-c29ae57300e0
the SE ones douple, triple, ... after each save. Maphack lights are reloaded
with polymer_resetlights() (though I've had them disappearing after load, I
couldn't reproduce it afterwards).
- in debugging builds, print a message when polymer_resetlight is called on a
nonexistent one. The problem is not so much the call itself (it's guarded),
but the fact that resources on the caller side may not have been freed if it
thinks that those lights do in fact exist. Right now, it's not the case though.
- add 'loaded map hack' messages after some other successful loadmaphack calls
git-svn-id: https://svn.eduke32.com/eduke32@2236 1a8010ca-5511-0410-912e-c29ae57300e0
'frequently' isn't such a good idea. Assume an actor constantly changes the
palette to some value and you're attacked by a newbeast at the same time. Then
the pain tinting would be reset each time the actor's code is run. This commit
adds a new flag 16 to setbrightness(), meaning "don't reset the fade tinting".
Its only use right now is from CON's setgamepalette command (and there, always).
The change is done in the engine and thus affects all platforms.
git-svn-id: https://svn.eduke32.com/eduke32@2225 1a8010ca-5511-0410-912e-c29ae57300e0
This is in the similar vein as the set-palette deferring and it's this
that fixes the low FPS in the radioactively contaminated area in AMC TC:
Megabase (since setgamma() is called from setbrightness()).
Again, update issues might be expected, but changing focus between EDuke32
and the desktop and back seems to restore the gamma settings properly on
Kubuntu. Looks like X (or whatever above handles this stuff) maintains it
on a per-application basis.
git-svn-id: https://svn.eduke32.com/eduke32@2222 1a8010ca-5511-0410-912e-c29ae57300e0
CON code sometimes uses 'setgamepalette' from withing actors, which is a bit too
frequent. Deferring the actual palette updating means that multiple requests in
between two screen redraws are coalesced into one, which is desirable for
performance reasons and for the reduction of 'tearing' artefacts (but not
prevention, since the drawing isn't synced to the screen refresh rate with
vsync off).
(Did-not-)update issues might be introduced.
Windows isn't touched because
- I expect it to be more brittle, especially in light of the ATI HW gamma
problems.
- I haven't tested whether the particular performance penalty that lead to this
change ('gas' in AMC TC) exists there too
git-svn-id: https://svn.eduke32.com/eduke32@2221 1a8010ca-5511-0410-912e-c29ae57300e0
color-inversed shots. For both PNG and TGA, change the way they're
done in 8-bit mode: instead of XORing every byte with 15, save the
inverse palette (each component taken 255-x).
git-svn-id: https://svn.eduke32.com/eduke32@2219 1a8010ca-5511-0410-912e-c29ae57300e0
instead of shorts. This fixes their values' overflow in AMC TC megabase and
probably a couple of other large maps.
git-svn-id: https://svn.eduke32.com/eduke32@2216 1a8010ca-5511-0410-912e-c29ae57300e0
This makes savegames practically the same as the initial snapshot of a demo.
Saves are now named 'dukesavX.esv' (demos: 'edemoX.edm').
Additionally, many changes that couldn't/needn't be cleanly separated are added
with this commit:
- make spriteext_t have the same size across 32/64 bit platforms (actor_t partially)
- prevent saving/loading in MP games (it certainly didn't work and still doesn't)
- it's time we start using assertions! Define NDEBUG for releasse builds.
- reset savegame major and minor versions (we have a new magic string, so no conflict)
git-svn-id: https://svn.eduke32.com/eduke32@2207 1a8010ca-5511-0410-912e-c29ae57300e0
32- and 64-bit platforms. Also, make struct type actor_t also have a common
size of 128 bytes. New code currently disabled and #ifdef'd for comparison.
This requires certain t_data[] entries ([1]: move ptr, [4]: action ptr and
[5]: ai ptr with actors) to be converted to script offsets instead of pointers,
breaking savegame and net packet compatibility (we could in theory try hard not
to, but it would be too much trouble).
git-svn-id: https://svn.eduke32.com/eduke32@2185 1a8010ca-5511-0410-912e-c29ae57300e0
Actors are always moved such that _they_ clip against blocking sprites, even
if their blocking bit is clear. Setting the new bit make them not clip against
anything. The promary use of this is for decorative moving sprites that are
spawned in masses, such as rain or snow.
git-svn-id: https://svn.eduke32.com/eduke32@2184 1a8010ca-5511-0410-912e-c29ae57300e0
already have MAXSPRITESONSCREEN of them, return 1 to signal that the caller
should break out of the loop.
git-svn-id: https://svn.eduke32.com/eduke32@2183 1a8010ca-5511-0410-912e-c29ae57300e0
Usage: press the ['] (quote) modifier together with the PERIOD key.
Aligns only the immediate upper and lower neighbors of each wall that got
aligned by following point2s or nextwalls. Doesn't play well with Alt
(carry over xrepeat) yet, might need two subsequent alignment passes.
git-svn-id: https://svn.eduke32.com/eduke32@2178 1a8010ca-5511-0410-912e-c29ae57300e0
(getzrange, hitscan, clipmove, drawmapview).
They're reproducible with DNE1.3D; Since these angle values most likely come
from CON code, my suggestion would be to bit-and all values representing angles
with 2047 when setting the from CON, but I'd have to think about potential
side-effects of doing this.
git-svn-id: https://svn.eduke32.com/eduke32@2170 1a8010ca-5511-0410-912e-c29ae57300e0
callback 'G_Polymer_UnInit'.
- In astub.c, reset spritelightid to -1 when nulling the spritelightptr of
a sprite (no crashes observed, just precaution)
- In sdlayer.c, catch SIGILLs with our signal handler too, since illegal
instructions are what the instrumented debug builds will execute when
attempting to carry out an undefined (per C) operation.
git-svn-id: https://svn.eduke32.com/eduke32@2169 1a8010ca-5511-0410-912e-c29ae57300e0
How in the name of hell this could pass undetected for so long is a
mystery to me.
git-svn-id: https://svn.eduke32.com/eduke32@2163 1a8010ca-5511-0410-912e-c29ae57300e0
values; check the color index that is potentially gotten from the string to
be printed.
git-svn-id: https://svn.eduke32.com/eduke32@2162 1a8010ca-5511-0410-912e-c29ae57300e0
them has a different height, print the sectnums of two differing sectors
to so that the mapper can find and examine them with Ctrl-J.
git-svn-id: https://svn.eduke32.com/eduke32@2146 1a8010ca-5511-0410-912e-c29ae57300e0
The texture warping mode will need to be set depending on whether we're
actually drawing a parallaxed sky or not.
git-svn-id: https://svn.eduke32.com/eduke32@2142 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes the vertical (~1 texel wide) stripes that are especially
noticable with tiled art skies and Polymost with r_parallaxskyclamp=1
or Polymer (which always uploads skies with repeating s and t coords).
What constitutes a sky tile is currently hardcoded to be >=78 and <=99.
git-svn-id: https://svn.eduke32.com/eduke32@2141 1a8010ca-5511-0410-912e-c29ae57300e0
and restore_highlighted_sector functions. What this means is that TROR bunches
are now correctly duplicated too (only if all sectors of a given bunch are
highlighted).
git-svn-id: https://svn.eduke32.com/eduke32@2138 1a8010ca-5511-0410-912e-c29ae57300e0
