And use these in jmact/mathutil.c's FindDistance2D()/FindDistance3D().
The main use is to allow passing dx/dy instead of sprite positions; the code
that actually uses this is not committed.
git-svn-id: https://svn.eduke32.com/eduke32@4579 1a8010ca-5511-0410-912e-c29ae57300e0
They classify former uses of int64_t into two classes:
- coord_t: those that represent coordinates and need 64-bit precision for
proper functioning with large values
- inthi_t: those that were added for e.g. casts merely to prevent undefined
behavior on overflow
DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4578 1a8010ca-5511-0410-912e-c29ae57300e0
Inspired by
http://forums.duke4.net/topic/7506-tror-question/page__view__findpost__p__199151
the corruption checker now checks for certain conditions of the loops of each
sector. Recall that CW loops are outer and CCW loops are inner.
- If a sector has no or more than one outer loop, count that as corruption
(level 4 and 3, respectively).
- (Disabled) For sectors with exactly one outer loop, check that all inner
ones are inside it. This is currently not compiled due to an asymmetry of
loopinside() for degenerate cases, similar to pre-r3898 inside().
git-svn-id: https://svn.eduke32.com/eduke32@4569 1a8010ca-5511-0410-912e-c29ae57300e0
Note to MSVC users: You can get the revision number if you run `make rev o=obj` with MinGW before you build.
DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4565 1a8010ca-5511-0410-912e-c29ae57300e0
1 compiler error.
2 compiler warnings.
1 runtime warning.
Note that at this time, CPLUSPLUS=1 LUNATIC=1 fails to build due to C++ function mangling, and Win64 Lunatic crashes.
DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4540 1a8010ca-5511-0410-912e-c29ae57300e0
1. The application must specify its proper name and technical name. Instead of eduke32_or_mapster32.crash.log, we now have eduke32.crash.log and mapster32.crash.log.
2. The exception handler will display a message box informing the user of a crash and requesting they send in the crash log. The box has three options: "Quit", the DLL's current behavior, "Continue", which passes the exception to the next handler, and "Ignore", which resumes execution immediately. These should allow the user to skip bogus exceptions picked up by ebacktrace, such as one I get with my laptop that causes EDuke32 no issues.
git-svn-id: https://svn.eduke32.com/eduke32@4538 1a8010ca-5511-0410-912e-c29ae57300e0
When that mode is enabled (see below for caveats), wall textures that have a
non-power-of-two height (call it 'h') will be modified to look like in classic:
Let 'H' be the next power of two greater than 'h'. The texture will be uploaded
with height 'H', made up from 'h' hlines of the original texture, followed by
'H'-'h' first hlines of the same.
No panning "corrections" will take place. The mode is disabled by default.
Caveats/notes:
* the mode requires that r_hightile is disabled
* it is not implemented in Polymer
* in the Lunatic build, it is ineffective when a VX map is loaded, as those
display walls with NPOT height textures correctly
git-svn-id: https://svn.eduke32.com/eduke32@4498 1a8010ca-5511-0410-912e-c29ae57300e0
... and cull code that is dead with the X*alloc() versions since they never
return NULL on requesting memory.
Use something like
git grep '[^Xx]\(m\|c\|re\)alloc *('
and
git grep '[^Xx]strdup *('
to see places where I left the B*alloc() calls intact.
BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4491 1a8010ca-5511-0410-912e-c29ae57300e0
These wrap the x*alloc or xstrdup functions in compat.c. The handler gets passed
__FILE__, __LINE__ and __func__ (if available) in debugging builds.
Terminating the application process immediately in case of allocation failure
will let us prune many error handling paths and simplify a good portion of code.
git-svn-id: https://svn.eduke32.com/eduke32@4490 1a8010ca-5511-0410-912e-c29ae57300e0
- in mdloadskin() and gloadtile_hi(), use new function check_nonpow2()
(bit-twiddling) instead of loop
- Replace a couple of missed literals with CACHEAD_* enum labels
git-svn-id: https://svn.eduke32.com/eduke32@4488 1a8010ca-5511-0410-912e-c29ae57300e0
Note: in polymer.c, this was buggy (but harmless) because .r is a char:
if ((uint32_t)hictinting[MAXPALOOKUPS-1].r & 0xFFFFFF00) != 0xFFFFFF00)
git-svn-id: https://svn.eduke32.com/eduke32@4487 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the game not process as many ticks as have elapsed during the saving
afterwards.
git-svn-id: https://svn.eduke32.com/eduke32@4450 1a8010ca-5511-0410-912e-c29ae57300e0
The overall situation is thus as follows:
- in C and from Lua, that member is called 'fogpal'
- In CON (both C-CON and LunaCON), it's 'fogpal' with 'alignto' being an alias;
'filler' wasn't available before, either.
- In m32script, it's 'fogpal' or 'alignto' ('filler' is not available any more)
git-svn-id: https://svn.eduke32.com/eduke32@4416 1a8010ca-5511-0410-912e-c29ae57300e0
That is, if that member has a nonzero value, that one is taken for the color of
the GL fog instead of (most of the time) sector[].floorpal. "Sky sectors", that
is, skyboxes or simply parallaxed floors/ceilings are *not* handled.
git-svn-id: https://svn.eduke32.com/eduke32@4415 1a8010ca-5511-0410-912e-c29ae57300e0
This is done by factoring out some polymer.c:polymer_getbuildmaterial() code
into polymer_eligible_for_artmapping() and using that. The one in polymer.c
can still determine to not use ART mapping on some ("rare"?) occasions, so
it's not 100% in sync.
git-svn-id: https://svn.eduke32.com/eduke32@4407 1a8010ca-5511-0410-912e-c29ae57300e0
- factor out eligible_for_tileshades()
- remove some rendmode 1 code
- move some auto vars further down
git-svn-id: https://svn.eduke32.com/eduke32@4406 1a8010ca-5511-0410-912e-c29ae57300e0
Fix a case in G_MovePlayers(), where the player sprite's shade is approached
toward the ceiling/floor's shade. Before, it could stop at one above or below!
git-svn-id: https://svn.eduke32.com/eduke32@4392 1a8010ca-5511-0410-912e-c29ae57300e0
Make Mapster32 save as map-text if there is a wall with non-zero 'blend'.
git-svn-id: https://svn.eduke32.com/eduke32@4368 1a8010ca-5511-0410-912e-c29ae57300e0
One potential use is to add r_togglecomposition "0" if you don't like Aero turning on and off every time you switch between 2D mode and 32-bit 3D mode.
git-svn-id: https://svn.eduke32.com/eduke32@4344 1a8010ca-5511-0410-912e-c29ae57300e0
As opposed to the previous way, where the first fog pals was <numlookups>+1,
where <numlookups> is the first byte value of LOOKUP.DAT. This allows to
pack e.g. lookups [1 .. 25] and [30 .. <lastpal>] into LOOKUP.DAT and have fog
pals be generated at pals [26 .. 29] (i.e. the additional lookups don't
shift the fog pals, making user maps depending on these numbers not look as
intended.)
git-svn-id: https://svn.eduke32.com/eduke32@4335 1a8010ca-5511-0410-912e-c29ae57300e0
Also, error if didn't read enough data and account for TITLE and REALMS
swap between basepal number and on-disk order (sigh).
git-svn-id: https://svn.eduke32.com/eduke32@4334 1a8010ca-5511-0410-912e-c29ae57300e0
- Added preprocessor value NETVERSION, to be incremented in the source whenever changes are made to the network protocol.
- Implemented proper server-side version verification of all clients upon connection.
- Implemented connection refusal when we reach MAXPLAYERS. (Should be expanded to implement server player caps.)
- Protected against OOB array accesses if an invalid player id is received.
- Renamed all "Recieve" to "Receive".
git-svn-id: https://svn.eduke32.com/eduke32@4322 1a8010ca-5511-0410-912e-c29ae57300e0
On the C side, slightly rewrite (now) getclosestcol_lim() for clarity.
git-svn-id: https://svn.eduke32.com/eduke32@4308 1a8010ca-5511-0410-912e-c29ae57300e0
Also, fix a missed .filler -> g_ambiencePlaying[] rewrite in the editor.
In C-CON, 'detail' is kept as alias to C-side (former) .filler / now .blend,
but that name is *deprecated*.
git-svn-id: https://svn.eduke32.com/eduke32@4305 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes updating the viewscreen in Polymer's ART mapping mode.
git-svn-id: https://svn.eduke32.com/eduke32@4304 1a8010ca-5511-0410-912e-c29ae57300e0
Currently, sprite[].filler (to be renamed) selects a blending table. If none
is installed with that index, the blending table at index 0 is taken (which is
read from PALETTE.DAT on engine startup). Thus, for now, the non-Lunatic build
will never use a custom blending table because there's no way to register one!
But the functionality is there.
git-svn-id: https://svn.eduke32.com/eduke32@4301 1a8010ca-5511-0410-912e-c29ae57300e0
- use SPRITES_OF* iterator macros
- new function: E_SpriteIsValid(); add some safety checks
(e.g. hitag used as sprite index)
- the rest is mostly "the usual code transformations"
git-svn-id: https://svn.eduke32.com/eduke32@4281 1a8010ca-5511-0410-912e-c29ae57300e0
- Make Win+F* also make play and RTS sound, since modern OS's window managers
like to eat Alt-F*. (Some Win+F* may be inaccessible too, but together all
10 should hopefully be covered.)
- Fix an issue where keys other than F1-F10 were considered as starting an RTS
sound and crashing EDuke32 in the process
git-svn-id: https://svn.eduke32.com/eduke32@4278 1a8010ca-5511-0410-912e-c29ae57300e0
When a map named <filename>.map is loaded (<filename> may also contain directory
separators), the engine checks for existence of <filename>_XX.art in the virtual
file system, where XX is a 0-padded number from 00 to 19. It loads a consecutive
sequence of these ART files, i.e. aborts whenever a number in the sequence isn't
found (in contrast to normal ART loading).
Restrictions:
- the per-map ART files must not reside in ZIP files
- if a tile number is attempted to be overridden that has a dummytile or is
cache1d-locked, per-map ART loading fails
On failure, the map is still loaded, but a diagnostic message is output to the
log/OSD.
Loaded per-map ART data are cleared whenever the map is "left". In particular:
- whenever another map is loaded
- in the editor: when a new map is started
- in the game: after the bonus ending screen of a finished level, after going
to the title screen via the menu
A final note: file names are supposed to be looked up and compared
case-sensitively. That is, <filename> must match EXACTLY between the map's and
per-map ART one; 'art' must be lowercase. Otherwise, the cookie monster will
come and eat you!
BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4257 1a8010ca-5511-0410-912e-c29ae57300e0
The scrollwheel is unique among PC input because it has no innate "hold length". Previously, the layers gave the mousewheel a fake hold length to allow the not-necessarily-synchronous game/editor code to pick up the input before the layers marked it as "no longer pressed". This passed under Windows, but it didn't slide under SDL.
Besides the two problems listed above, it also potentially limited the rate of weapon selection, where scrolling too fast would not register every clicks. [Unrelatedly, this is still the case when you scroll faster than the game's own tickrate, but addressing that would require rewriting input handling to go through a list of "events" for each tic instead of looking at overall pressed/unpressed states.]
git-svn-id: https://svn.eduke32.com/eduke32@4200 1a8010ca-5511-0410-912e-c29ae57300e0
- Move ARRAY_SIZE() macro to compat.h, add another one ARRAY_SSIZE()
- In A_RadiusDamage(): note maybe-unaligned access issue, prevent unlikely oob
- sector.c: use SPRITES_OF* macros where appropriate
git-svn-id: https://svn.eduke32.com/eduke32@4199 1a8010ca-5511-0410-912e-c29ae57300e0
The functions mvlineasm1, mvlineasm4 and tvlineasm2 can now be set to clamp
the vertical texture coordinate (vplc), preventing the unsightly stray lines
on the bottom of non-y-flipped sprites. (The first part of this effort, r3483,
handled their top).
However, this is only enabled for the mvlineasm ones: the vectorized variants
suffered almost no slowdown (even though a PADDUSD SSE instruction would be a
nice thing to have), while it was pretty significant for the sequential
translucent ones.
Summarizing, this leaves two cases where stray lines may appear in the non-ASM
build (the saturation is NYI for a.nasm):
- at the bottom of y-flipped sprites
- at the bottom of translucent sprites (can be toggled by #define)
Another observation is that recent GCC generates much faster code for this
stuff than Clang from SVN.
git-svn-id: https://svn.eduke32.com/eduke32@4161 1a8010ca-5511-0410-912e-c29ae57300e0
These were too much "looking into the implementation of a module" for my
taste, hence OSD_GetShadePal() earlier.
git-svn-id: https://svn.eduke32.com/eduke32@4138 1a8010ca-5511-0410-912e-c29ae57300e0
I updated the help windows to prefer these variants because they are superior to the -xSquished versions.
Also, factor out the command-line processing code for the above, plus con/def modules and clipmaps.
git-svn-id: https://svn.eduke32.com/eduke32@4128 1a8010ca-5511-0410-912e-c29ae57300e0
Instead of directly in build.c:app_main(). Previously, it was possible that an
argument to an option, e.g. "WGR2" with "-game_dir WGR2", would get interpreted
as the initial map to load. This in turn would attempt to execute WGR2.cfg as
sequence of OSD commands -- where that file is an EDuke32 config file instead!
Now: maps are passed without any options, e.g. "mapster32 [opts...] debug.map".
The map file name is not added to the "additional parameters" for map testing.
git-svn-id: https://svn.eduke32.com/eduke32@4121 1a8010ca-5511-0410-912e-c29ae57300e0
Variables at global scope which share a name tend to actually be the same variable. Not good when you pass such a variable to function that immediately returns if the passed parameter (the variable) equals said variable (itself).
git-svn-id: https://svn.eduke32.com/eduke32@4090 1a8010ca-5511-0410-912e-c29ae57300e0
Unfortunately, SDL2 does not (yet?) provide a Yes/No box for wm_ynbox().
git-svn-id: https://svn.eduke32.com/eduke32@4085 1a8010ca-5511-0410-912e-c29ae57300e0
Most often, this had happened when casting comparison functions for qsort()
like these: "int yax_cmpbunches(const int16_t *b1, const int16_t *b2)"
to a function pointer type expecting "const void *". Alas, this is undefined
behavior: see
http://blog.frama-c.com/index.php?post/2013/08/24/Function-pointers-in-C
and posts linked from it.
At least two cases have not been fixed:
- The savegame system maintains pointers which are either to data or a function in
the generic "void *". This ought to be made into a union.
- Probably also:
#define OSD_ALIAS (int32_t (*)(const osdfuncparm_t*))0x1337
git-svn-id: https://svn.eduke32.com/eduke32@4068 1a8010ca-5511-0410-912e-c29ae57300e0
DONT_BUILD, because there have been no significant changes of the non-Lua build.
git-svn-id: https://svn.eduke32.com/eduke32@4006 1a8010ca-5511-0410-912e-c29ae57300e0
- libs and headers are expected in platform/Windows/* (not there yet)
- prefix Lua #includes with luajit-2.0/
- build bytecode objects with absolute path name (used for debug info)
git-svn-id: https://svn.eduke32.com/eduke32@4000 1a8010ca-5511-0410-912e-c29ae57300e0
- Rename sky_t members: yscale -> horizfrac, bits -> lognumtiles.
- Add default sky (8 tiles, horizfrac=32768 (i.e. 1/2 the scene horiz), offsets
all zero) and CLOUDYOCEAN sky (8 tiles, horizfrac=65536, offsets all zero)
to multipsky[].
- Get rid of "psky_t g_psky", merely maintaining a g_pskyidx instead. Set it up
at map load time so as to keep the behavior of the legacy per-map psky:
the last sector index with a matching psky ceiling wins.
- In mapstate_t, save g_pskyidx too, not (former) pskybits and pskyoffs[].
- Make on-map-load global psky setup consistent for the game and editor by
factoring it out into common.c: G_SetupGlobalPsky().
- Remove a couple of useless initializations, add some static assertions.
This commit is more likely to introduce subtle differences in behavior.
Specifically, getpsky() now always returns the default sky properties instead of
the global sky ones (but with all-zero offsets) when no match for a suiting
multi-psky is found. This is only likely to affect the yscale/horizfrac of
non-multi-pskies when a global non-default multi-psky has been set up.
Bump BYTEVERSION again.
git-svn-id: https://svn.eduke32.com/eduke32@3976 1a8010ca-5511-0410-912e-c29ae57300e0
- Consolidate psky* arrays into a "typedef struct psky_t" "g_psky" and
"multipsky[]".
- Factor out getting parallaxed sky properties into getpsky().
- Condense initial multi-psky setup by memcpy'ing from multipsky[].
- New function: MultiPsky_TileToIdx().
- Add new define PSKYOFF_MAX and related consistency-checking assertions.
- Lower MAXPSKYTILES to 8 to reflect current usage (was 256).
- Game: make multi-pskies consider dynamically-remapped MOONSKY1, BIGORBIT1
and LA. (Not very useful as the editor will still only act for the static
values -- 80, 84 and 89, respectively.)
An attempt has been made to preserve behavior even in strange cases, so this
commit is unlikely to introduce regressions. Because of point 6, BYTEVERSION
had to be bumped.
git-svn-id: https://svn.eduke32.com/eduke32@3975 1a8010ca-5511-0410-912e-c29ae57300e0
Having to tag these few variables and functions as ATTRIBUTE((used))
seems sensible, but what follows is just strange. OSD_Printf? headspritesect?
git-svn-id: https://svn.eduke32.com/eduke32@3932 1a8010ca-5511-0410-912e-c29ae57300e0
Also, get rid of the strange filename[len]=255 hack in loadboard()
and make its file name arg const char* at last.
git-svn-id: https://svn.eduke32.com/eduke32@3913 1a8010ca-5511-0410-912e-c29ae57300e0
Also, clean up the saving/loading logic a bit:
- On load failure, display message with purple color.
- Take over the current file name ('boardfilename') only on success.
- Check SaveBoard() return values in various places.
git-svn-id: https://svn.eduke32.com/eduke32@3911 1a8010ca-5511-0410-912e-c29ae57300e0
In 3D mode, Alt+F now only attempts to set the first wall of the aimed at
wall, not collecting upper/lower neighbors. For this, press Shift+Alt+F.
In 2D mode, they are always collected.
git-svn-id: https://svn.eduke32.com/eduke32@3825 1a8010ca-5511-0410-912e-c29ae57300e0
Analogously for the negation; remove a couple of redundant decls of "qsetmode".
git-svn-id: https://svn.eduke32.com/eduke32@3823 1a8010ca-5511-0410-912e-c29ae57300e0
The 'x' is for "extended", since its last arg is a switch of whether to disable
sliding. Use that from gameexec.c.
git-svn-id: https://svn.eduke32.com/eduke32@3811 1a8010ca-5511-0410-912e-c29ae57300e0
