Fixed, Script Editor: Find and Replace window now sets keyboard focus to the input textbox when opening the window/switching between tabs.
Fixed, Nodes Viewer mode: SEGS overflows were not handled, causing a crash. Also extended SEGS limit is now used.
Updated ZDoom_DECORATE.cfg (A_SetSize).
Fixed: some map format conversion errors were never displayed, because errors list was cleared after performing map conversion.
Fixed: 3d floor indicators in 2D modes were not updated after leaving Visual mode.
Fixed: some UDMF-only interface buttons were never removed after converting map format from UDMF.
Added "doomthingrotationangles" Game Configuration property. When enabled, editor actions related to changing thing angle will snap the resulting angle to 45 degree increments. This property is set to true for vanilla game configurations.
Fixed a crash when changing game configuration from one without Thing actions support to one with them while in Things mode.
Fixed, cosmetic, DB2 bug: current editing mode button was deselected after reloading resources.
Updated documentation ("Game Configuration - Basic Settings" page).
Internal: added NeutralResourcesLanguageAttribute to all assemblies. Theoretically this should result in a bit better performance when accessing embedded resources.
Updated ZDoom_DECORATE.cfg (A_Chase flags).
Fixed, Map Analysis mode: fixed a crash when trying to dissolve an invalid sector when one of it's linedefs referenced it on the both sides.
Fixed, Sectors mode: fixed incorrect undo description when deleting sectors.
Internal: joined declaration and assignment of some more variables.
Added "makedoorceil" game configuration property. Works the same way as "makedoortrack" and "makedoordoor", but for ceilings of door sectors.
Changed, Game configurations: the editor no longer tries to load DECORATE/MODELDEF/VOXELDEF/GLDEFS/REVERBS lumps when "decorategames" setting is not specified / is set to empty string.
Changed, General interface: "Tools -> Reload MODELDEF/VOXELDEF" and "Tools -> Reload GLDEFS" menu items are no longer shown when current game configuration doesn't support DECORATE.
Fixed a crash when pasting linedef/thing properties in Hexen map format.
Fixed, Visual mode: Visual Thing resources were not fully unloaded when resetting D3D device leading to crash when switching to the editor from a DX-using game engine (like ZDoom) running in fullscreen.
Fixed: in some cases, when current game configuration supported multiple script compilers, it was possible to open/create a map or change map options without selecting any script compiler.
Fixed, New Map Options window: default map name was not updated when switching game configurations.
Fixed: copied map element properties were not reset after switching to another map.
Fixed: stored textures for "Make Door" action were not reset after switching to another map.
Fixed, Game Configurations window: currently selected test engine name was not updated when pasting test engines from another configuration.
Fixed, Game Configurations: all "Heretic in Doom map format" configurations were using Doom sector effects list.
Fixed, Game Configurations: all "Strife in Doom map format" configurations were using Doom sector effects list.
Added "Paste Properties Special" actions in "Classic" and "Visual" categories. They work the same way as "Paste Special" action.
Added: "Copy Properties", "Paste Properties" and "Paste Properties Special" options are now shown in the Edit menu if current classic mode supports them.
Changed, Paste Properties Special window: only options relevant to current map format are now displayed.
Changed, Paste Properties Special window, UDMF: all UI-managed options are now available.
Fixed: MAPINFO parser was unable to process "include" directives.
Fixed, General interface: selection info was reset to "Nothing selected" after few seconds regardless of current selection.
Fixed, Visual mode: thing bounding boxes were not updated when changing things positions using Randomize mode.
Fixed, Visual mode: event lines were displayed at incorrect height when entering Visual mode for the first time.
Fixed, Texture Browser window: when MixTexturesFlats Game Configuration option is disabled, textures/flats are no longer shown in the Used group when flats/textures with the same names are used in the map.
Fixed(?): probably fixed an exception some users reported when trying to initialize a Classic mode after switching from Visual mode with "Sync cameras" option enabled.
Changed, Game configurations, Thing Categories: a block must have at least one thing category property to be recognized as a thing category.
Changed, Visplane Explorer: the plugin now outputs more info when it fails to initialize vpo.dll.
Cosmetic, Thing Edit window, Doom/Hexen map format: adjusted UI layout so thing flags control no longer displays scrollbars in Hexen map format.
Internal: merged methods from UDMFTools into UniFields, removed UDMFTools.
Updated Inno Setup script (added VC++ 2008 SP1 distributive).
Updated ZDoom_DECORATE.cfg (A_CheckBlock).
Updated documentation (added "System Requirements" page).
Visual mode: fog distance calculation is now much closer to GZDoom one.
Visual mode: thing brightness calculation when a thing is affected by floor glow is now much closer to GZDoom one.
Linedef edit window, UDMF: added "Reset front/back brightness" buttons.
Sector edit window, UDMF: added "Reset ceiling/floor brightness" buttons.
Internal, Visual mode, Things mode: persistent event lines are now updated only when map objects are changed instead of doing it on every display redraw.
Internal: improved Dictionary lookup times when using map objects and textures as keys.
Internal: added "Release + Profiler" solution configuration.
Updated ZDoom_ACS.cfg (Warp).
High-DPI: fixed many issues with incorrect controls size (Tag selector width, Comment Editor size, icons size, tabs size etc.).
Cosmetic: changed map geometry dragging undo messages to more descriptive ones.
Fixed, Textures Browser, cosmetic: "Show textures in subdirectories" checkbox should be repositioned when "Long texture names" one is invisible.
Updated ZDoom_DECORATE.cfg (added A_SetFloatSpeed + a couple of fixes).
Changed: OS name, GPU name and GZDB revision info are now added to the exception text and GZCrash.log.
Fixed, cosmetic: toolstrip separators visibility must be updated when resizing the main window.
Internal: removed Plug.DisplaySize, Plug.DisplayLocationAbs and Renderer.ViewportSize. The same data can be accessed from anywhere using General.Interface.Display.Size and General.Interface.Display.LocationAbs. Also Plug.DisplayLocationAbs returned incorrect coordinates...
Removed, Texture Browser: removed "Show image sizes" checkbox. "Show texture and flat sizes in browsers" preferences setting is now used instead.
Fixed, Things mode: event line between pre-last and the last PatrolPoint was not drawn.
Fixed, Things mode: highlight range for sizeless things (things with "fixedsize" game configuration property) was calculated incorrectly.
Fixed: fixed a crash when opening Script Editor after using "Open map in current wad" command to switch to UDMF map with SCRIPTS lump when current script configuration was not saved in the wad's .dbs file.
Fixed: map closing events were not triggered when using "Open map in current wad" command, which could potentially result in plugin crashes/incorrect behavior.
Fixed: Sector Drawing overrides panel could trigger an exception when closing the map during resource loading.
Internal: added "Debug + Profiler" solution configuration, added 2 profiling methods to DebugConsole.
Internal: rewrote MainForm.DisplayStatus() / StatusInfo to handle selection info in a more structured way.
Fixed, internal: some destructors could potentially be executed more than once potentially leading to exceptions. Other destructors were not called at all.
Updated ZDoom_DECORATE.cfg.
Fixed incorrect formatting of changelog messages displayed in the updater window.
Changed, Classic modes: models for things hidden by thing filter are now rendered with much lower alpha than the "regular" ones.
Fixed, .obj Terrain Importer mode: the mode was unable to parse .obj vertex/face definitions generated by some (Cinema4D) modeling programs.
Changed, .obj Terrain Importer mode: vertical (e.g. perpendicular to up axis) polygons are now skipped during model importing.
Changed, Ceiling Align mode, Floor Align mode: changed rotation steps form 45 to 15 deg.
Fixed: PairedFloatControl had incorrect initial link icon.
Internal, AngleControl: rewritten AngleChanged event so it behaves like the rest of custom events.
Updated GZDB icon.
Import Wavefront .obj as Terrain mode: floor height of each created sector is now set to the average height of an .obj polygon it was created from.
Import Wavefront .obj as Terrain Settings window: added "Use slopes" checkbox. When enabled, the mode will create slopes using vertex height offsets (UDMF) or Floor Vertex Height things (1504).
Fixed, Visual Mode: things were rendered at wrong height after using "Lower/Raise Height" actions in sectors with sloped floor (or ceiling for ceiling-aligned things)
Fixed: info panel was not updated after switching to another Edit Mode.
Fixed, Texture Browser Form: well, I broke "Tab" key functionality again (in previous commit)...
Maintenance: changed curly braces style to match DB2 one (hopefully not breaking anything in the process...).
Maintenance: changed private method names casing to match DB2 one.
Consistency, Randomize Sectors form: persistent settings are now saved only when applying changes done in the form (e.g. in the same conditions as in Randomize Things / Vertices forms).
Fixed: Randomize Sectors, UDMF: vertex height changes were not undone properly after using the mode (I broke it in r2101).
Fixed: Randomize Sectors: floor/ceiling textures can not be used as lower/upper textures when "MixTexturesAndFlats" is disabled. In this case the corresponding option is now changed to "Use default texture".
Added icons for "Save Screenshot" menu items.
Development: "Save Screenshot (active window)" action will work on a child Form only if it is inherited from DelayedForm.
Renamed "Toggle dynamic lights rendering" action to "Show dynamic lights".
Changed: "Show dynamic lights" action now toggles between available dynamic light rendering modes.
Renamed "Toggle models rendering" action to "Show models".
Changed: "Show models" action now toggles between available model rendering modes.
Removed "Toggle dynamic lights animation" and "Render selected/all models" actions.
Fixed, Randomize Sectors form: selection highlight was not updated after applying the changes when the form was shown in Sectors mode.
Consistency: selection is now cleared after applying changes done in Randomize Things and Randomize Vertices forms.
Fixed, Classic modes: sprites of things with attached models were not rendered when model rendering was disabled.
Updated documentation.
Also, I would like to use this opportunity to thank Siberian Tiger from DTD Team for helping me with SVN builds for more than two years. You made my constant wrestling with the code a much less tedious process.
Randomize mode: randomized pitch, roll and scale can now be applied to things.
Randomize mode: removed "Relative" option, because results with this option enabled were almost the same as without it.
Classic modes, model rendering: selected models are now rendered using highlight color, so they no longer blend with thing rectangle/circle.
Model rendering, UDMF: scale was applied incorrectly to models with pitch or roll.
Updated documentation.
"Preferences -> Editing -> When splitting a linedef" setting is now always used when splitting linedefs.
"Preferences -> Editing -> When splitting a linedef": added "Reset X and Y" option.
"Preferences -> Editing -> Auto-align textures of newly created linedefs" option now works in a more intelligent fashion.
Draw Curve Mode: added settings panel.
Sectors mode: added "Make Door" button to the toolbar.
Swapped Side panel and Info panel z-order.
Interface: split toolbar into 3 separate toolbars. All toolbar buttons are now viewable at 1024x768.
Interface: grouped stuff in "Modes" menu a bit better.
Interface: added "Draw [stuff]" buttons to modes toolbar.
Interface: reorganized main menu. Hope it makes more sense now.
API: added General.Interface.AddModesButton() and General.Interface.AddModesMenu(), which can be used to add buttons to specific group in "Modes" toolbar and menu items to specific group in "Modes" menu, so actions, which behave like an editing mode, but are not part of one can be added there.
