Yamagi Burmeister
033550cd59
Bump the version number to 5.11
2013-05-20 19:14:29 +02:00
svdijk
9564b7b55e
fix aspect ratio menu option
2013-05-19 18:42:44 +02:00
svdijk
1d0f979bf9
Q_strlcat minor bugfix
2013-05-18 21:07:52 +02:00
svdijk
5692388da1
cleanup Com_sprintf, minor tuning
2013-05-18 19:01:23 +02:00
svdijk
6472514c8f
Lets not do the last two commits just before 5.11
...
Revert "change several strcat calls to Q_strlcat calls"
This reverts commit ab879f1bc7b46e210d76
2013-05-18 18:59:39 +02:00
svdijk
ab879f1bc7
change several strcat calls to Q_strlcat calls
2013-05-17 22:25:18 +02:00
svdijk
b46e210d76
change (v)sprintf calls to (v)snprintf calls
2013-05-17 21:50:31 +02:00
svdijk
be63c7f198
note to self: always compile before you commit
2013-05-13 21:39:53 +02:00
svdijk
a5044a93eb
make sure svs.demofile is set to NULL after closing it
2013-05-13 21:26:58 +02:00
svdijk
662229a568
fix FS_FOpenFileWrite, also make FS_FOpenFile{Write,Append} open in binary mode
2013-05-13 21:17:55 +02:00
svdijk
f5a44ff5ae
remove unnecessary fileHandle_t typecasts
2013-05-13 21:11:52 +02:00
svdijk
2ad4255187
fix sv.demofile/svs.demofile type/treatment
2013-05-13 21:00:50 +02:00
svdijk
4bef586e67
remove unnecessary fileHandle_t typecasts
2013-05-13 18:49:16 +02:00
svdijk
b08fbb7cbf
replace remaining strncat calls with memcpy calls
2013-05-13 18:38:37 +02:00
svdijk
8fad0a9008
change some more (mostly wrong) strncpy calls to Q_strlcpy calls
2013-05-12 20:25:00 +02:00
svdijk
c469a97b36
fix typo
2013-05-11 15:29:02 +02:00
svdijk
7c1d2b4219
fix incorrect typecasts in FS_* calls
2013-05-11 15:22:27 +02:00
svdijk
e07294b6b1
replace most strncpy calls (several of them wrong) by Q_strlcpy calls
2013-05-11 14:44:36 +02:00
svdijk
4682c888f0
replace strncat calls by Q_strlcat calls
2013-05-11 13:24:13 +02:00
svdijk
a26892cb90
add Q_strlcpy and Q_strlcat
2013-05-11 13:19:52 +02:00
svdijk
392c04bc1d
some sanity check commenting
2013-05-11 12:57:50 +02:00
svdijk
8869b0542d
rename strlwr to Q_strlwr
2013-05-11 12:46:49 +02:00
svdijk
cd54f56b36
some more boundary checking
2013-05-08 20:16:23 +02:00
svdijk
3c62c2be5a
ogg/cda: move defaults from yq2.cfg to engine
2013-05-08 20:06:53 +02:00
svdijk
1c431e14ac
make the load/save statusbar a bit more informative
2013-05-08 20:01:44 +02:00
svdijk
9803652781
some strncpy/strncat fixes
2013-05-07 21:46:46 +02:00
svdijk
d4c5960f8f
help/score updates: fix typo
2013-05-04 14:47:02 +02:00
Yamagi
b58b78714b
Merge pull request #23 from alericoveri/osx-aluwf
...
AL_InitUnderwaterFilter wasn't being compiled conditionally
2013-04-28 08:46:42 -07:00
svdijk
27b3d27584
sdl: fix key repeat (SDL_EnableKeyRepeat was called too early)
2013-04-28 12:38:53 +02:00
svdijk
fa9548fcad
M_Popup: some more tuning
2013-04-28 12:31:51 +02:00
Alejandro Ricoveri
1c84805c1f
AL_InitUnderwaterFilter wasn't being compiled conditionallyi
2013-04-27 17:21:15 -04:30
svdijk
8e1bb70932
M_Popup: align the same as the old popups
2013-04-26 18:55:23 +02:00
svdijk
082c2d454f
cinematics: minor rewriting of cin_force43 behaviour
2013-04-24 20:33:12 +02:00
svdijk
695e0a9a16
cinematics: fix video mode changing during cinematic playback
2013-04-22 20:51:59 +02:00
svdijk
3c6a57129e
cinematics: force 4:3 aspect ratio (new cvar cin_force43)
2013-04-22 20:44:47 +02:00
svdijk
b9deabd86a
videomenu: fix CUSTOM_MODE
2013-04-21 18:44:50 +02:00
Yamagi Burmeister
277c2b9567
Use the same default volume on all platforms again
...
Testing showed that after the last round of sound changes FreeBSD is the
only platform with distorted sound when s_volume is set too high. I'm
pretty sure that it's caused by a bug in the OSS backend of openal-soft.
I'll need to analyze this more and maybe write a problem report. Since
FreeBSD users should be experienced enough to lower the volume when
there are problem (there's a FAQ in our README!), use the same default
volume on all platforms.
2013-04-21 12:02:38 +02:00
Yamagi Burmeister
3ac88e1bda
Rename snd_wav.c to wave.c to get in line with other files
2013-04-21 11:32:20 +02:00
Yamagi Burmeister
84020e4d8e
Rename snd_vorbis.c to ogg.c. This name is more appropriate
2013-04-21 11:30:07 +02:00
Yamagi Burmeister
fb7b97d868
Minor cleanups to snd_vorbis.c
...
- Remove any forward declarations
- Tightens checks for SDL
2013-04-21 11:27:31 +02:00
Yamagi Burmeister
78ce1e491c
Rename snd_al.c to openal.c
2013-04-21 11:19:01 +02:00
Yamagi Burmeister
1d6aaca68e
Whitespace cleanup
2013-04-21 11:14:00 +02:00
Yamagi Burmeister
a1f5ccfcac
Update header comment
2013-04-21 11:13:26 +02:00
Yamagi Burmeister
92be8c75e3
Rework volume handling
2013-04-21 11:06:18 +02:00
Yamagi Burmeister
b9e71913ae
Restructure and refactor snd_al.c
2013-04-21 10:40:00 +02:00
Yamagi Burmeister
e5505f90d7
Rename snd_dma.c to sound.c. yq2 never used DMA.
2013-04-20 15:09:57 +02:00
Yamagi Burmeister
957e4d4735
Whitespace cleanup
2013-04-20 15:06:47 +02:00
Yamagi Burmeister
242a62384c
Update header comment
2013-04-20 15:06:15 +02:00
Yamagi Burmeister
b9a62ff34b
Cleanup snd_dma.c
2013-04-20 15:01:31 +02:00
Yamagi Burmeister
720db15de9
Cleanup local.h of the sound system
2013-04-20 14:20:58 +02:00
Yamagi Burmeister
d9cd053461
Whitespace cleanup
2013-04-20 13:48:21 +02:00
Yamagi Burmeister
910dc421c6
Update file header and comment
2013-04-20 13:47:15 +02:00
Yamagi Burmeister
ef7c85bbcd
yq2 never had a dma based soundengine. Let's call it just "sound".
2013-04-20 13:40:54 +02:00
Yamagi Burmeister
b45876ffdd
Refactor the SDL part of S_Update() into the backend
2013-04-20 13:32:58 +02:00
Yamagi Burmeister
d9643e8b76
Refactor the SDL part of S_RawSamples into the backend
2013-04-20 13:16:40 +02:00
Yamagi Burmeister
2c356d142e
Refactor the SDL part of S_LoadSound into the SDL backend
2013-04-20 10:26:31 +02:00
Yamagi Burmeister
0c93ecbddb
Print the number of OpenAL sources in the backend
2013-04-20 10:26:19 +02:00
Yamagi Burmeister
cbecc5b2dc
Retire snd_mem.c and integrate it into snd_dma.c and the backends
2013-04-20 09:19:59 +02:00
Yamagi Burmeister
3989ff73b2
Retire snd_mix.c and incorporate it into the SDL backend
2013-04-20 09:03:47 +02:00
Yamagi Burmeister
35ba5b0de1
Move all generic function used only by the SDL backend into it
...
Additionally rename those function to SDL_ prefix and refactor
them a little.
2013-04-20 08:40:53 +02:00
Yamagi Burmeister
f1ce0c0c00
Move all SDL backend function to the SDL backend and use SDL_ as prefix
2013-04-20 08:02:13 +02:00
svdijk
20110faeed
Some minor cleanup/tuning/commenting
2013-04-14 18:46:08 +02:00
svdijk
4465d7e045
menu: some style syncing between savegame/server listing
2013-04-14 16:17:00 +02:00
svdijk
d297b97c12
menu: Rework the save/load menu a bit using M_Popup (get rid of excessive green)
2013-04-14 16:13:58 +02:00
svdijk
f9cda84d6e
menu: Use M_Popup for the server search message
2013-04-14 16:07:37 +02:00
svdijk
1d86145f7f
menu: Use M_Popup for the sound system restart message
2013-04-14 16:03:59 +02:00
svdijk
5daee97e2a
menu: Add a generic popup function M_Popup
2013-04-14 14:49:45 +02:00
svdijk
aae7de19c4
Use some safer offset values for gl_zfix, and default to 0
...
(Since it seems to cause unwanted artifacts with some drivers)
2013-04-07 19:07:16 +02:00
Yamagi Burmeister
9def7d908f
Silence another 2 gcc48 warnings due to creative array usage
...
This is nearly the same case as in 1bee58840d
2013-04-07 13:54:24 +02:00
Yamagi Burmeister
1bee58840d
Silence a gcc48 warning due to some "creative" array usage
...
To my understanding this code and the old code do exactly the same, this
one is just more readable. Therefor this change should be a no-op.
2013-04-07 13:43:17 +02:00
svdijk
41d89c7171
Whitespace
2013-03-24 18:12:14 +01:00
svdijk
346d9873f0
Fix double server entries in multiplayes menu.
...
Also display netadr in statusbar instead of in the list (lowres compatible).
2013-03-24 18:08:06 +01:00
svdijk
77c9cb7e05
Update savegame tables (forgot them in the previous commit)
2013-03-23 12:30:48 +01:00
svdijk
5ed89a0373
Move some functions to a better place
2013-03-23 11:40:54 +01:00
svdijk
6f6c9a1aae
Fix help computer and inventory updates when already opened
2013-03-20 20:21:53 +01:00
svdijk
909e69462f
Fix a typo in a function prototype in game.h
2013-03-19 21:42:48 +01:00
svdijk
d07735b831
Rewrite the Shift+Escape code a bit (somewhat cleaner)
2013-03-18 19:37:26 +01:00
svdijk
317355f7ca
Minor rewriting.
2013-03-17 21:32:50 +01:00
svdijk
e49693bec4
Make cmdlist and cvarlist alphabetically ordered.
2013-03-17 18:16:02 +01:00
svdijk
8b28e3d0df
Make Shift+Escape toggle the console.
2013-03-17 17:31:00 +01:00
svdijk
f36f708b24
Unbind default bindings before loading stored bindings (new cvar cfg_unbindall)
2013-03-16 22:49:48 +01:00
svdijk
7637d32f6f
Work around the z-fighting on some baseq2 maps (new cvar gl_zfix)
2013-03-16 16:47:57 +01:00
Yamagi Burmeister
d9519cee61
Remove an unneccessary check.
...
This check involved an uninitialized pointer, so it never worked. It
could lead to crashes in some situations, especially when clients tried
to reconnect after a manual map change on the dedictated server.
2013-03-10 12:08:58 +01:00
Yamagi Burmeister
e1903dd925
Change some qglTexParameterf to qglTexParameteri
...
Scott S. pointed out that some the qglTexParameterf calls should be
qglTexParameteri. I don't know if all this changes are correct (I'm
an openGL noob) but they shouldn't make thinks worse and "works for me".
2013-03-10 10:20:42 +01:00
Citramonum
3e56938aa9
Update vid.c
...
Fix a typo in 1280x960 graphic mode parameters.
2013-03-09 21:06:06 +04:00
Yamagi
2300a547a8
Merge pull request #19 from JayWalker512/stupid-laptop-res
...
Added support for 1366x768 laptop resolution in video menu. This will break existing configs one again if a mode of 1440x900 or higher is used.
2013-01-20 03:08:00 -08:00
Yamagi Burmeister
56d920162e
Reduce default volume to 0.3 on non-linux-platforms
...
If the volume is set too high the OpenAL backend preamplification leads
to overdriven sound samples. It's not quite understandable to me why
that only happen on platforms other than Linux (maybe a bug in OpenAL?)
and there's not much we can do against it besides reducing the volume.
As the side note: Simmilar behavior can be seen at least in ioQ3 and
dhewm3...
2013-01-20 12:01:10 +01:00
Yamagi Burmeister
bc5c308684
Add a cvar "s_openal_maxgain" to clamp AL_GAIN
...
This cvar is a last resort if all other measures to prevent overdriven
preamplifation fail. Setting it to lower value than 1.0 limits the
overall dynamic range, so sound quality is lost. This is especially
hearable when low volume samples are encountered, like the shotgun
combined with the silencer.
2013-01-20 12:01:10 +01:00
Yamagi Burmeister
1f5012aec3
Calculate the AL_GAIN by s_volume and don't set a global AL_GAIN
2013-01-20 12:01:10 +01:00
Yamagi Burmeister
548bbeb129
Pass raw "float" volume to OpenAL
...
The client uses float values between 0.0 and 1.0 to represent the volume
of sound samples. This is the range required by OpenAL. But the generic
part of the sound system multiplied the raw float value with 374 and
clamped it to a full integer. That worked by luck withth the OpenAL
backend but broke at least the silencer powerup. Solve this problem by
adding a new field "float oal_vol" to the channel_t struct and use it to
pass the raw float value to OpenAL.
This fixes issue #18
2013-01-20 12:00:29 +01:00
Brandon Foltz
d6feeeff8d
Added support for 1366x768 laptop resolution in video menu.
2013-01-18 14:59:44 -05:00
Yamagi Burmeister
2890dafbda
Divide effect volume by 3 when using the OpenAL backend
...
Since OpenAL 1.15 AL_GAIN has much more weight than before. That leeds
to overdriven effect samples unless the volume control is set to a very
low level. With this change volume can be set to a high level without
distorting. But there's one problem. A division by 2 is to low to rule
distortion out and by 3 the game is a little bit quieter than before. A
value of 2.5 would be optimal but is not applicable since the volume is
represented by an integer. I've choosen 3 to be aon the save side.
As a side note: This problem was very less worse on Linux than on
Windows and FreeBSD. Maybe Linux guys need to pump there volume up
to compensate this work-around.
2013-01-06 17:09:30 +01:00
Yamagi Burmeister
2ee5937fa3
Bump version number to 5.10
2012-12-30 17:46:22 +01:00
svdijk
0f985d3e45
Cleanup the keybindings menu code.
2012-12-29 18:21:46 +01:00
svdijk
4f5ba24003
Some more load/save menu tuning (better QMF_GRAYED use).
2012-12-29 17:18:30 +01:00
svdijk
83037ace88
Some load/save menu tuning.
2012-12-29 17:16:53 +01:00
svdijk
74f244801f
Fix game saving on page 2(+).
...
Fixes issue #16 .
2012-12-26 09:30:16 +01:00
svdijk
bcc6f62b61
Make the Load/Save menu multi-page (support low-res).
2012-12-09 17:57:00 +01:00
svdijk
e78a18c5ca
Fix the "help computer" keybinding option; some whitespace cleanup.
2012-12-09 17:56:47 +01:00
Joshua Scoggins
7116d7e90a
Fixed a bug in src/common/header/common.h with respect to ia64
...
I had written #elif define __ia64__ instead of #elif defined __ia64__
This has been fixed.
2012-11-30 20:34:35 -08:00
Joshua Scoggins
a578fff56a
Extended the arch check in src/client/header/client.h to include ia64
...
For ia64 it's necessary to define int as long long instead of long int. I know
this for a fact because pointers that were encoded as long int in my LLVM and
CLIPS bridge would fail horribly when passed out of clips back into LLVM. long
long fixed it.
2012-11-30 20:30:28 -08:00
Joshua Scoggins
df4c4dd9dd
Added ia64 to the ARCH define
2012-11-30 20:21:28 -08:00
Joshua Scoggins
dc0f2ec779
Added the ia64 cpustring
2012-11-30 20:20:44 -08:00
svdijk
0fe5d4f610
Make sure that the crashlog actually gets written.
2012-11-17 15:31:12 +01:00
svdijk
1dd083cd7d
COM_Parse: Fix buffer overflow in long quoted strings.
2012-11-17 15:28:45 +01:00
svdijk
561add00a8
cl_main:CL_UpdateWindowedMouse() optimization.
2012-11-16 20:30:59 +01:00
Yamagi Burmeister
a76d7d5cfb
The default video mode is 5 (640x480). Spotted by svdijk.
2012-11-14 21:12:21 +01:00
svdijk
247e2baa3a
More mouse grab/release tuning.
2012-11-14 21:08:07 +01:00
Ilia Zhirov
46c77400e2
fixed build on pre ansi c89 compilers
2012-11-14 14:49:40 +06:00
svdijk
823753dec9
Some minor restructuring and cleanup.
2012-11-07 21:15:18 +01:00
svdijk
1c0934f462
Game cleanup.
2012-11-07 21:10:48 +01:00
svdijk
eb8a2d792f
Minor console mouse release tweak.
2012-11-05 21:33:44 +01:00
svdijk
8c8fba7421
Refresher cleanup.
2012-11-05 21:33:35 +01:00
Yamagi Burmeister
82275f636e
Merge branch 'master' of github.com:yquake2/yquake2
2012-11-04 18:52:27 +01:00
Yamagi Burmeister
d263e896cf
Use an enum for "qboolean" on OS X
...
Defining "qboolean" to something other than an enum changes the size of
some structs. That in turn breaks compatiblity with mods that use the
enum define. With this change the addons (tested with xatrix and rogue)
are running on OS X. Many thanks to my sister for lending me her
Macbook.
2012-11-04 18:47:15 +01:00
Yamagi Burmeister
5c217771cb
Use correct include path on OS X
...
This path matches the libjpeg.framework we'll use to build the
binary releases.
2012-11-04 09:23:25 +01:00
Yamagi Burmeister
86ca73754d
Silence a compiler warning on OS X
2012-11-04 09:18:37 +01:00
svdijk
7be7f6831f
backends/sdl/input.c: only call SDL_WM_GrabInput() when needed.
2012-10-30 20:36:29 +01:00
svdijk
64632bbc3b
client/cl_main.c:UpdateWindowedMouse(): release mouse in menu.
2012-10-30 20:36:23 +01:00
svdijk
76e3480ccb
Some rewriting of windowed_mouse setting, in preparation of releasing the mouse in the menu.
2012-10-30 20:36:15 +01:00
svdijk
a1adac8ba9
client/menu/menu.c: make ConsoleFunc() consistent with cl_console:Con_ToggleConsole_f().
2012-10-30 20:36:10 +01:00
Ricardo Garcia
74beca0d11
Add "horplus" cvar to get Hor+ behavior with default FOV
...
If "horplus" is set, the "fov" cvar is interpreted as the horizontal FOV
in a 4:3 screen, and is adapted automatically to the current screen
aspect ratio accordingly. If not set, use the old Vert- approach.
In addition, "horplus" can also be set from the video menu by selecting
the "Auto" option for aspect ratio, which also resets the FOV value to the
standard 90 degrees.
Finally, add a 5:4 aspect ratio (1280x1024) and correct the 16:9 angle
slightly.
2012-10-28 10:20:46 +01:00
Yamagi Burmeister
a79b705c13
Make cl_maxfps persistent
2012-10-06 09:15:32 +02:00
Yamagi Burmeister
687ca61dfa
Fix gl_swapinterval
2012-10-06 09:14:12 +02:00
Yamagi Burmeister
943c29804c
Add the SDLMain SDL wrapper, needed for OS X
2012-09-14 11:46:22 +02:00
Yamagi Burmeister
e9c5c3ca8e
Add savegame defines for OS X
2012-09-14 11:32:42 +02:00
Yamagi Burmeister
ba10009aa5
Add support for Mac OS X
...
These are the code changes and Makefile changes necessary to build and
run Yamagi Quake II on Max OS X. OS X 10.6 or higher is required, older
version may work but we cannot guarantee it. The documentation will be
added in another commit. This patch was contributed by W. Beser, I made
only some small cosmetical changes.
2012-09-14 11:21:02 +02:00
Yamagi Burmeister
dd6ed24104
Bump version number to 5.00
2012-09-03 14:34:51 +02:00
Sander van Dijk
1f2452e7a6
src/game/g_weapon.c: Some sanity check changes.
2012-08-28 17:05:31 +02:00
Yamagi Burmeister
7958767922
Blaster shots shall not explode at the skybox
2012-08-26 15:38:00 +02:00
Yamagi Burmeister
4a81e58128
Okay, do the last commit acutally right... damage can be NULL.
2012-08-26 14:57:28 +02:00
Yamagi Burmeister
8819ad1c9a
Fix a too strict sanity check in void blaster_touch()
...
This sanity check caused a too early exit of the function if the player
stood directly in front of a wall and fires the blaster or hyper
blaster. Therefor the wall impact effect wasn't drawn. This commit
fixes issue #6 . Many thanks to svdijk for narrowing this problem down to
somewhere between 3.00 and 4.00.
2012-08-26 10:24:55 +02:00
Yamagi Burmeister
ed22ca81c2
Silence a warning with the upcoming Clang 3.2
2012-08-22 14:25:32 +02:00
Jonathan Gray
1f9d6084b6
OpenBSD port
2012-08-18 09:53:03 +02:00
Jonathan Gray
22fa99b713
test SIN6_LEN not __FreeBSD__ for sin6_len
2012-08-12 13:40:43 +10:00
Sander van Dijk
f292c1e22d
Fix custom resolution handling in the video menu.
2012-08-06 14:04:12 +02:00
Yamagi Burmeister
602dd1af6f
Connect non-base OpenGL function by calling wglGetProcAddress() on Windows
...
This is necessary since non-base OpenGL functions can't be connected by
calling the standard GetProcAddress() on Windows. To archive this the
old qwglGetProcAdress() is renamed into GetProcAdressGL() and a new
function pointer qwglGetProcAdress is introduced. On unixoid System it's
NULL and on Windows connected to wglGetProcAddress(). If it's NULL the
system wide function is called, if not the function Pointer is used.
2012-08-03 15:14:45 +02:00
Yamagi Burmeister
739590e639
Do not hide library loading errors behind "developer"
2012-08-03 15:13:58 +02:00
Sander van Dijk
3d4bbe6c31
Fix aspect menu options.
2012-08-03 08:05:09 +02:00
Yamagi Burmeister
efd1ddb1c5
Initialze vid_gamma
2012-08-02 15:33:42 +02:00
Yamagi Burmeister
8141380030
Allow to set the aspect ratio via the menu
2012-08-02 15:18:58 +02:00
Yamagi Burmeister
de9dda7432
Restart the refresher when certain values are changed via the menu
2012-08-02 14:59:51 +02:00
Yamagi Burmeister
f1420ffe75
Use correct default mode
2012-08-02 14:47:18 +02:00
Yamagi Burmeister
3ab4e58df5
Cleanup the video menu, remove support for different refresher
2012-08-02 14:39:33 +02:00
Yamagi Burmeister
c6eaf5c876
Mobe LIBGL makro to common.h and replace all hardcoded libGL calls with it
2012-08-02 14:06:32 +02:00
Yamagi Burmeister
751d39fb50
Update the file header comments
2012-08-02 14:00:04 +02:00
Yamagi Burmeister
8d0dfd2c30
Merge vid.c into 1 generic file
2012-08-01 16:54:09 +02:00
Yamagi Burmeister
f89bb3265e
Combine qgl.c glwindow.h into one generic file
2012-08-01 15:51:39 +02:00
Yamagi Burmeister
e5f70fcf40
Merge qal.c into one generic file for all platforms
...
To archive this, 3 new functions Sys_GetProcAddress(), Sys_LoadLibrary()
and Sys_FreeLibrary() were added to abstract the library loading code
into a platform independend API.
2012-08-01 14:54:18 +02:00
Yamagi Burmeister
399c581f06
Move src/windows to src/backends/windows
2012-08-01 14:12:05 +02:00
