... and use it in three places. In two of these uses,
1) CON {read,write}arrayfromfile and
2) G_SavePlayer,
display an error message if the file name such generated is too long.
In the CON commands of 1), also error out if the file couldn't be opened.
git-svn-id: https://svn.eduke32.com/eduke32@2997 1a8010ca-5511-0410-912e-c29ae57300e0
ROTATESPRITE_MAX is moved to build.h and all orientation bits from CON commands
using rotatesprite are ANDed with (ROTATESPRITE_MAX-1). Some of the functions
use ROTATESPRITE_MAX for different internal purposes, which will not be exposed
to CON now (a good thing). Also, dorotspr_handle_bit2 is made clearer.
git-svn-id: https://svn.eduke32.com/eduke32@2929 1a8010ca-5511-0410-912e-c29ae57300e0
setaspect(), which is called by setaspect_new, already uses the *dimen variables,
so it's the same thing done twice. Now, a change from the original full status
bar to the original mini status bar keeps the horizontal FOV again and only
bumps the view a little higher, as with the classic aspect determination.
git-svn-id: https://svn.eduke32.com/eduke32@2913 1a8010ca-5511-0410-912e-c29ae57300e0
This makes sounds like DUKE_GET (item pickup) be heard for the second player
in the splitscreen mod, too.
git-svn-id: https://svn.eduke32.com/eduke32@2890 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the code rather more readable in some places. Unlike the two
preceding commits, this one is actually purely textual replacement.
git-svn-id: https://svn.eduke32.com/eduke32@2877 1a8010ca-5511-0410-912e-c29ae57300e0
The p variable (sometimes named differently) has short scope in all cases,
so I'm almost sure that the replacements amount to an identity transformation.
git-svn-id: https://svn.eduke32.com/eduke32@2875 1a8010ca-5511-0410-912e-c29ae57300e0
... against invalid weapon indices and arguments accessed from arrays/structs.
git-svn-id: https://svn.eduke32.com/eduke32@2873 1a8010ca-5511-0410-912e-c29ae57300e0
uhypsq calculates the hypotenuse using unsigned multiplication. This is
permissible since for arbitrary int32s a and b, the following holds in
two's complement arithmetic:
(int32_t)((uint32_t)a * b) == (int32_t)((int64_t)a * b)
("Signed and unsigned multiplication is the same on the bit level.")
This fixes various overflows where wall lengths for walls of length > 46340
are calculated, but does not rid us of other overflows in the same vein
(usually dot products between vectors where one point is a wall vertex and
the other a position in a sector).
git-svn-id: https://svn.eduke32.com/eduke32@2791 1a8010ca-5511-0410-912e-c29ae57300e0
The bug was introduced with SAMESIZE_ACTOR_T enabling in r2208.
This fixes being unable to read the messages in A.Dream* by zykov eddy.
git-svn-id: https://svn.eduke32.com/eduke32@2788 1a8010ca-5511-0410-912e-c29ae57300e0
(LUNATIC build only.)
Also, a minor problem is identified. sizeof(actor_t) is 124 on 64-bit platforms,
while the expected size is 128 bytes. This needs to be corrected whenever the
next savegame version bump happens.
git-svn-id: https://svn.eduke32.com/eduke32@2724 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes the glitches/corruption whereever showview is used from
EVENT_DISPLAYROOMS while the scene is actually rendered to a tile instead of the
frame buffer, for example because we have a tilted view or "pixel doubling"
enabled. Fixing it for real (i.e. so that the showview actually completes)
will require more effort.
git-svn-id: https://svn.eduke32.com/eduke32@2706 1a8010ca-5511-0410-912e-c29ae57300e0
They were broken by r2666, which made their elements intptr_t instead of
int32_t, but this change was not reflected in related allocation code.
WARNING: players on 64-bit platforms should not attempt to load games saved
with r2665 or earlier.
git-svn-id: https://svn.eduke32.com/eduke32@2689 1a8010ca-5511-0410-912e-c29ae57300e0
For Lunatic, we'll want to get rid of the t_data --> script indirections, since
the latter will be no more. Thus, all parameters are saved in t_data directly.
For the normal build, there are no changes, only stylistic tweaks.
git-svn-id: https://svn.eduke32.com/eduke32@2669 1a8010ca-5511-0410-912e-c29ae57300e0
EVENT_SOUND: triggered upon playback of any sound, this allows the "hard coded" sounds to be altered in a context-aware fashion instead of having to resort to clunky hacks like replacing them with a blank sound effect. RETURN var
iable is set to the sound effect # of the sound to be played, or -1 to cancel playback.
EVENT_CHECKTOUCHDAMAGE: triggered in P_CheckTouchDamage() whenever the player collides with anything. Value of RET
URN is set to the result provided by clipmove() and so can be decoded in the same way. Value of RETURN when the event is over can also be manipulated to control some of the hard coded damage effects.
EVENT_CHECKFLOORDAMAGE: triggered in P_CheckFloorDamage(), RETURN is simply the picnum of the floor of the sector t
he player is in. Can be used to cancel hard coded floor damage effects or to make other tiles exhibit the same eff
ects
Other misc fixes and cleanups, including a possible workaround for Duke Plus SECTOREFFECTOR light issues wherein all SE49 and SE50 that have a statnum of STAT_EFFECTOR are simply changed to STAT_LIGHT during the STAT_EFFECTOR loop
now.
git-svn-id: https://svn.eduke32.com/eduke32@2652 1a8010ca-5511-0410-912e-c29ae57300e0
This is so that it may be intercepted in the future.
The only code that's not replaced by the function call is with the CON
interface to g_player[].ps->pals via player[].pals X and .pals_time.
Also, comment out one instance because it's overwritten by a succeeding one.
git-svn-id: https://svn.eduke32.com/eduke32@2643 1a8010ca-5511-0410-912e-c29ae57300e0
(I.e. also restore r2232 again.)
The first one is the palette restore logic in G_DisplayRest, the second
is CON setgamepalette, to which the "don't gltexinvalidateall()" bit is
added to mimic the first. Hightile invalidations aren't really useful for
anything other than reloading them after a video mode change, IMO.
These changes mean that
1) active full screen tints should (almost) always be kept with a basepal
change. The only exceptions to this are when tints really have to be
cleared, e.g. when changing the player view in co-op play.
2) there should be no performance issues with simultaneously changing
basepals while a tint is applied
git-svn-id: https://svn.eduke32.com/eduke32@2637 1a8010ca-5511-0410-912e-c29ae57300e0
Because gltexinvalidate*() could be called too often when setgamepalette is used
while having a tint overlaid else. Pending thorough analysis/reworking of the
32-bit mode base palette handling / texture invalidation.
git-svn-id: https://svn.eduke32.com/eduke32@2620 1a8010ca-5511-0410-912e-c29ae57300e0
This requires one tweak in drawrooms' umost/dmost setup to prevent oob access.
Specifically, a coordinate difference of 0 is allowed. In the classic renderer,
this would mean a one-pixel (real screen coords) height or width. In Polymost,
it would currently mean a one-pixel height and zero-pixel width, but this might
be subject to change.
git-svn-id: https://svn.eduke32.com/eduke32@2574 1a8010ca-5511-0410-912e-c29ae57300e0
The showview command transforms the 320-based screen bound coordinates to the real
screen bounds like xreal = (x*xdim)/320, which shows a bias towards zero: for
example, for a 1680 screen width, the maximum permissible value 319 is mapped to
round_to_zero((319*1680)/320) == 1674. (The rounding is implicit in the integer
division). This makes it impossible for a view to cover the whole screen with any
other resolution than 320x200. The new command transforms the bounds like
xreal = (x*(xdim-1))/319, which would map 319 to 1679 in the preceding example.
git-svn-id: https://svn.eduke32.com/eduke32@2573 1a8010ca-5511-0410-912e-c29ae57300e0
There are instances where oob picnums may propagate to that function, so
protect it. The digitanumber[z] bound check is actually made more permissive,
but could also just as well be removed now.
git-svn-id: https://svn.eduke32.com/eduke32@2533 1a8010ca-5511-0410-912e-c29ae57300e0
The major outside-visible change is that this fixes the sound cutoff bugs that
happened because newly-spawned sprites took the place of those whose sounds
had not yet finished playing.
Besides, there are these changes:
- remove deletesprite{sect,stat}
- we have a new engine variable 'tailspritefree' that keeps track of the
sprite freelist tail
- we need to store it in savegames and mapstates, so bump the savegame
minor version
git-svn-id: https://svn.eduke32.com/eduke32@2470 1a8010ca-5511-0410-912e-c29ae57300e0
This might now be even more confusing for users reading both the source
and CON code (where the access is necessarily still via '.clipping'),
but at least reading the source now makes sense :P
git-svn-id: https://svn.eduke32.com/eduke32@2454 1a8010ca-5511-0410-912e-c29ae57300e0
This is so that in the event of a crash, no CON dump will be printed if no
(actor or loadactor) CON code was actually executing at the time of the
crash, confusing the users. Note: doesn't apply for event code.
git-svn-id: https://svn.eduke32.com/eduke32@2453 1a8010ca-5511-0410-912e-c29ae57300e0
We've been running with same-sized actor_t for a while without problems now.
In the unlikely event (famous last words) that an issue should pop up later,
this revision should be consulted for the differences between the two versions.
git-svn-id: https://svn.eduke32.com/eduke32@2451 1a8010ca-5511-0410-912e-c29ae57300e0
This was causing oob sector accesses with code like this:
getwall[hitwall].nextsector temp
ifvarvare sector[temp].floorz sector[temp].ceilingz setvar tempb 1
(from DT's HYPERCORE).
Also validate quote indices passed to CON's quote and userquote commands at
runtime.
git-svn-id: https://svn.eduke32.com/eduke32@2381 1a8010ca-5511-0410-912e-c29ae57300e0
Internally, the last argument to neartag is now a pointer to a function
int32_t (*blacklist_sprite_func)(int32_t i),
which is supposed to return 1 if sprite[i] should NOT be considered for hitting.
This is now used in the hard-coded neartag() calls in sector.c, but not in any
way in CON (there's neither a C blacklist function provided, nor is there a
possibility to define one in CON). There, all sprites with picnums >=1 and <=10
(i.e. the effectors) will be blacklisted. This remedies problems where such
sprites would get in the way of switches.
Note that a whitelist approach (only consider a predefined set, namely those
picnums which will be checked afterwards) has back-compatibility implications
since people may have used e.g. lotagged window sprites to cover a switch.
Also, the >=1 to <=10 range is [sic] (the static, not dynamic values are used),
since anyone redefining effector picnums is clearly out of their mind.
git-svn-id: https://svn.eduke32.com/eduke32@2373 1a8010ca-5511-0410-912e-c29ae57300e0
Since the original source code release of Duke3D, there was a potentially
dangerous hack where actor[].dispicnum was set to -4 to signal "this actor
should not have a floor shadow for this moment" (it doesn't really work,
if you ask me).
Now, use another bit of actor[].flags for that purpose because setting
any picnum members to negative values asks for trouble.
git-svn-id: https://svn.eduke32.com/eduke32@2249 1a8010ca-5511-0410-912e-c29ae57300e0
crashes.
Usually, after loading a game, some wall tiles are tweaked depending on whether
adult mode is enabled or not. If it's not, those wall picnums are replaced
with blank or broken screens. If it is, they are restored from the wall's
.extra member. Apparently though, Mapster32 leaves some .extra members
floating around even after deleting a TROR nextwall link (it's used as the
'lower wall index'). Because MAXWALLS is greater than MAXTILES, this may
produce out-of-bounds accesses and corrupt memory (besides setting wall
tilenums to nonsensical values) later in the game.
Other than that, the change only affects loading savegames created with adult
mode OFF. Kinky TV screenies simply won't be restored then.
git-svn-id: https://svn.eduke32.com/eduke32@2235 1a8010ca-5511-0410-912e-c29ae57300e0
32- and 64-bit platforms. Also, make struct type actor_t also have a common
size of 128 bytes. New code currently disabled and #ifdef'd for comparison.
This requires certain t_data[] entries ([1]: move ptr, [4]: action ptr and
[5]: ai ptr with actors) to be converted to script offsets instead of pointers,
breaking savegame and net packet compatibility (we could in theory try hard not
to, but it would be too much trouble).
git-svn-id: https://svn.eduke32.com/eduke32@2185 1a8010ca-5511-0410-912e-c29ae57300e0
Actors are always moved such that _they_ clip against blocking sprites, even
if their blocking bit is clear. Setting the new bit make them not clip against
anything. The promary use of this is for decorative moving sprites that are
spawned in masses, such as rain or snow.
git-svn-id: https://svn.eduke32.com/eduke32@2184 1a8010ca-5511-0410-912e-c29ae57300e0
with RAND_MAX > 32767 (everything except Windows?). The 'displayrand' command
now returns values from 0 to 32767 inclusive, across all platforms.
git-svn-id: https://svn.eduke32.com/eduke32@2105 1a8010ca-5511-0410-912e-c29ae57300e0
setactorsoundpitch <actor#> <sound#> <pitchoffset>
which can be used to change the pitch of a playing sound.
The pitch offset has the same meaning as the definesound pitch range endpoints,
i.e. the units are 1/100th of a seminote. Note that just like the random pitch
offset, increasing the pitch makes the sound duration shorter (and vice versa).
git-svn-id: https://svn.eduke32.com/eduke32@2104 1a8010ca-5511-0410-912e-c29ae57300e0
- fix arg checking in checkdefs.sh
- some tilenum and quote ID validation in the CON interpreter
- G_DrawDigiNum and friends: eliminate redundant strlen calls
git-svn-id: https://svn.eduke32.com/eduke32@2086 1a8010ca-5511-0410-912e-c29ae57300e0
ceilings or floors. In such cases, you're not squished unconditionally (instead
of fetching the ceiling or floor height of the neighbor sector), but TROR isn't
meant for small-scale RoR anyway.
git-svn-id: https://svn.eduke32.com/eduke32@2071 1a8010ca-5511-0410-912e-c29ae57300e0
"The most noticeable change is the addition of the "includedefault" CON and DEF command, which will attempt to include eduke.con (or nam.con, or ww2gi.con), then game.con, or duke3d.def, or nam.def, or ww2gi.def. This is useful for TCs like my add-ons, where for my pseudo-mutators I currently say "include EDUKE.CON", but I also have to juggle this terrible order of paths, so that I can have an EDUKE.CON file in my HRP which says "include GAME.CON" to allow the mainline game to actually run, but also allow DukePlus to load its EDUKE.CON file (since it uses that and not an -x switch), and also allow any custom EDUKE.CON files in the root to be used."
git-svn-id: https://svn.eduke32.com/eduke32@1909 1a8010ca-5511-0410-912e-c29ae57300e0
* support for free mixing of multi- and single-tile parallaxed skies in classic
* make visibility independent of yxaspect and viewingrange in OpenGL modes
-- editor:
* when dragging walls, restore pixel width after that (only for the left and right walls of pointhighlight, and its nextwalls, if any)
* pasting on walls and auto-aligning them now carries over a few more fields
-- fixes:
* visibility in OpenGL modes wasn't incremented gradually (regression due to making 'clamp' an inline function instead of a macro)
* memory corruption due to calling qlz_compress with less than the recommended surplus storage of 400 bytes
* decorative sprites in the mirror showing non-flipped
* make the subway SE message (much) more helpful by showing which sector the game considers to be the track sector
git-svn-id: https://svn.eduke32.com/eduke32@1882 1a8010ca-5511-0410-912e-c29ae57300e0
* Polymer light access to m32script (light[<lightidx>].<field>). As an application, provide a state 'insertlights' that takes the currently active lights and puts them into the map as SEs (e.g. for maphack recovery).
* Prototype of a mechanism to gray out certain portion of a map, making them inactive to various, but not all, editing operations. Highlighting a set of sectors and pressing Ctrl-R will make the Z bounds be [(least ceiling z), (greatest floor z)] of all selected ones, pressing Ctrl-R when no sectors are highlighted will reset them. Not sure if it's for production use at this stage...
* The 'align walls' feature [.] now has three independently toggleable behaviours: recurse nextwalls (toggled when Ctrl is pressed), iterate point2s (disabled when Shift is pressed), and also copy pixel width (toggled when Alt is pressed).
* Make shades clamp instead of overflowing in the editor
Fixes:
* crash when carrying out certain operations on walls with xrepeat 0
* the Pause key on linux. Also make demo recording start on Shift-ScrollLock because ScrollLock alone is too easily pressed when pausing
git-svn-id: https://svn.eduke32.com/eduke32@1877 1a8010ca-5511-0410-912e-c29ae57300e0
