'frequently' isn't such a good idea. Assume an actor constantly changes the
palette to some value and you're attacked by a newbeast at the same time. Then
the pain tinting would be reset each time the actor's code is run. This commit
adds a new flag 16 to setbrightness(), meaning "don't reset the fade tinting".
Its only use right now is from CON's setgamepalette command (and there, always).
The change is done in the engine and thus affects all platforms.
git-svn-id: https://svn.eduke32.com/eduke32@2225 1a8010ca-5511-0410-912e-c29ae57300e0
certain situations (mostly cutscenes etc). This commit removes bit 1 from all
flags that make it to setbrightness, the meaning of which is "don't actually
update the palette". I have no idea what it was for and since the corresponding
P_SetGamePalette() calls were from places like the mentioned cutscenes, I don't
think it matters performance-wise.
git-svn-id: https://svn.eduke32.com/eduke32@2223 1a8010ca-5511-0410-912e-c29ae57300e0
This is in the similar vein as the set-palette deferring and it's this
that fixes the low FPS in the radioactively contaminated area in AMC TC:
Megabase (since setgamma() is called from setbrightness()).
Again, update issues might be expected, but changing focus between EDuke32
and the desktop and back seems to restore the gamma settings properly on
Kubuntu. Looks like X (or whatever above handles this stuff) maintains it
on a per-application basis.
git-svn-id: https://svn.eduke32.com/eduke32@2222 1a8010ca-5511-0410-912e-c29ae57300e0
CON code sometimes uses 'setgamepalette' from withing actors, which is a bit too
frequent. Deferring the actual palette updating means that multiple requests in
between two screen redraws are coalesced into one, which is desirable for
performance reasons and for the reduction of 'tearing' artefacts (but not
prevention, since the drawing isn't synced to the screen refresh rate with
vsync off).
(Did-not-)update issues might be introduced.
Windows isn't touched because
- I expect it to be more brittle, especially in light of the ATI HW gamma
problems.
- I haven't tested whether the particular performance penalty that lead to this
change ('gas' in AMC TC) exists there too
git-svn-id: https://svn.eduke32.com/eduke32@2221 1a8010ca-5511-0410-912e-c29ae57300e0
color-inversed shots. For both PNG and TGA, change the way they're
done in 8-bit mode: instead of XORing every byte with 15, save the
inverse palette (each component taken 255-x).
git-svn-id: https://svn.eduke32.com/eduke32@2219 1a8010ca-5511-0410-912e-c29ae57300e0
instead of shorts. This fixes their values' overflow in AMC TC megabase and
probably a couple of other large maps.
git-svn-id: https://svn.eduke32.com/eduke32@2216 1a8010ca-5511-0410-912e-c29ae57300e0
the constants 0 and 1, and moveptrs may reference the script up to index 2
then (though I'm not sure whether the code is reachable with moveofs either
0 or 1), so make sure it's nulled instead of whatever happened to compile at
the first two positions. Move 1 is only used once in the original cons,
when frozen and being shattered.
git-svn-id: https://svn.eduke32.com/eduke32@2211 1a8010ca-5511-0410-912e-c29ae57300e0
Now we don't need to worry about the numbers running out soon.
Bump BYTEVERSION by three to celebrate this, too.
git-svn-id: https://svn.eduke32.com/eduke32@2209 1a8010ca-5511-0410-912e-c29ae57300e0
This makes savegames practically the same as the initial snapshot of a demo.
Saves are now named 'dukesavX.esv' (demos: 'edemoX.edm').
Additionally, many changes that couldn't/needn't be cleanly separated are added
with this commit:
- make spriteext_t have the same size across 32/64 bit platforms (actor_t partially)
- prevent saving/loading in MP games (it certainly didn't work and still doesn't)
- it's time we start using assertions! Define NDEBUG for releasse builds.
- reset savegame major and minor versions (we have a new magic string, so no conflict)
git-svn-id: https://svn.eduke32.com/eduke32@2207 1a8010ca-5511-0410-912e-c29ae57300e0
It was identified with the clearfrags rewriting, but not corrected.
git-svn-id: https://svn.eduke32.com/eduke32@2203 1a8010ca-5511-0410-912e-c29ae57300e0
There were two instances of nearly identical code in premap.c and savegame.c.
Also identifies a (harmless) problem with realloc'ing, we had:
if (len+1 > sizeof(MapInfo[...].musicfn))
MapInfo[...].musicfn = Brealloc(MapInfo[...].musicfn, len+1)
which reallocs almost all the time (since .musicfn is a pointer). Now we do
realloc every time...
git-svn-id: https://svn.eduke32.com/eduke32@2202 1a8010ca-5511-0410-912e-c29ae57300e0
Bmemset(..., 0, sizeof(...)) instead of clearbuf(..., MAX..., 0),
because the latter would clear only half of the data on 64-bit platforms.
git-svn-id: https://svn.eduke32.com/eduke32@2189 1a8010ca-5511-0410-912e-c29ae57300e0
some information about it instead of simply omitting it.
Internally, struct savegame --> struct savegame_ for easier grepping.
git-svn-id: https://svn.eduke32.com/eduke32@2188 1a8010ca-5511-0410-912e-c29ae57300e0
32- and 64-bit platforms. Also, make struct type actor_t also have a common
size of 128 bytes. New code currently disabled and #ifdef'd for comparison.
This requires certain t_data[] entries ([1]: move ptr, [4]: action ptr and
[5]: ai ptr with actors) to be converted to script offsets instead of pointers,
breaking savegame and net packet compatibility (we could in theory try hard not
to, but it would be too much trouble).
git-svn-id: https://svn.eduke32.com/eduke32@2185 1a8010ca-5511-0410-912e-c29ae57300e0
Actors are always moved such that _they_ clip against blocking sprites, even
if their blocking bit is clear. Setting the new bit make them not clip against
anything. The promary use of this is for decorative moving sprites that are
spawned in masses, such as rain or snow.
git-svn-id: https://svn.eduke32.com/eduke32@2184 1a8010ca-5511-0410-912e-c29ae57300e0
already have MAXSPRITESONSCREEN of them, return 1 to signal that the caller
should break out of the loop.
git-svn-id: https://svn.eduke32.com/eduke32@2183 1a8010ca-5511-0410-912e-c29ae57300e0
to negative numbers. Previously, only checks for being zero were performed,
but CON code in the wild also has WEAPONx_SPAWN -1, which would propagate to
the sprite picnum...
git-svn-id: https://svn.eduke32.com/eduke32@2180 1a8010ca-5511-0410-912e-c29ae57300e0
Usage: press the ['] (quote) modifier together with the PERIOD key.
Aligns only the immediate upper and lower neighbors of each wall that got
aligned by following point2s or nextwalls. Doesn't play well with Alt
(carry over xrepeat) yet, might need two subsequent alignment passes.
git-svn-id: https://svn.eduke32.com/eduke32@2178 1a8010ca-5511-0410-912e-c29ae57300e0
Various code checked for switch tiles in the following manner,
for (ii=0; ii<2; ii++)
switch (DynamicTileMap[sprite[i].picnum-1+ii]) { case SOME_SWITCH: ... }
which blows for picnum 0. Now, we simply disallow it.
git-svn-id: https://svn.eduke32.com/eduke32@2174 1a8010ca-5511-0410-912e-c29ae57300e0
(getzrange, hitscan, clipmove, drawmapview).
They're reproducible with DNE1.3D; Since these angle values most likely come
from CON code, my suggestion would be to bit-and all values representing angles
with 2047 when setting the from CON, but I'd have to think about potential
side-effects of doing this.
git-svn-id: https://svn.eduke32.com/eduke32@2170 1a8010ca-5511-0410-912e-c29ae57300e0
callback 'G_Polymer_UnInit'.
- In astub.c, reset spritelightid to -1 when nulling the spritelightptr of
a sprite (no crashes observed, just precaution)
- In sdlayer.c, catch SIGILLs with our signal handler too, since illegal
instructions are what the instrumented debug builds will execute when
attempting to carry out an undefined (per C) operation.
git-svn-id: https://svn.eduke32.com/eduke32@2169 1a8010ca-5511-0410-912e-c29ae57300e0
How in the name of hell this could pass undetected for so long is a
mystery to me.
git-svn-id: https://svn.eduke32.com/eduke32@2163 1a8010ca-5511-0410-912e-c29ae57300e0
values; check the color index that is potentially gotten from the string to
be printed.
git-svn-id: https://svn.eduke32.com/eduke32@2162 1a8010ca-5511-0410-912e-c29ae57300e0
menu. If some sectors are highlighted, save their indices. The highlighting
of those particular sectors can then be restored at a later time (but careful
across structural modifications that tweak sector indices) by running the same
function. Shares a 'gamearray' with function 'collect_teleporting_sectors',
so the latter will reset this one when run.
git-svn-id: https://svn.eduke32.com/eduke32@2155 1a8010ca-5511-0410-912e-c29ae57300e0
one sector was filled and the 'clear bunch' message was displayed even if the
operation was canceled.
git-svn-id: https://svn.eduke32.com/eduke32@2153 1a8010ca-5511-0410-912e-c29ae57300e0
represents a pointer into the script for label types other than LABEL_DEFINE
instead of checking inclusion of the value in the script bounds. This
assertion was tested with WGR2 SVN.
git-svn-id: https://svn.eduke32.com/eduke32@2150 1a8010ca-5511-0410-912e-c29ae57300e0
them has a different height, print the sectnums of two differing sectors
to so that the mapper can find and examine them with Ctrl-J.
git-svn-id: https://svn.eduke32.com/eduke32@2146 1a8010ca-5511-0410-912e-c29ae57300e0
The texture warping mode will need to be set depending on whether we're
actually drawing a parallaxed sky or not.
git-svn-id: https://svn.eduke32.com/eduke32@2142 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes the vertical (~1 texel wide) stripes that are especially
noticable with tiled art skies and Polymost with r_parallaxskyclamp=1
or Polymer (which always uploads skies with repeating s and t coords).
What constitutes a sky tile is currently hardcoded to be >=78 and <=99.
git-svn-id: https://svn.eduke32.com/eduke32@2141 1a8010ca-5511-0410-912e-c29ae57300e0
and restore_highlighted_sector functions. What this means is that TROR bunches
are now correctly duplicated too (only if all sectors of a given bunch are
highlighted).
git-svn-id: https://svn.eduke32.com/eduke32@2138 1a8010ca-5511-0410-912e-c29ae57300e0
(i.e. first press RAlt, then hold RShift to make it active), consider all
sectors, even the grayed out ones.
This makes 6 modifier keys in 4 categories for RAlt. Can you name them all?
Also spell out the labels that get drawn near the reticle when applying
some of the modifiers and make them not show when not actually selecting
(e.g. pressed RShift alone, but have highlighted sectors)
git-svn-id: https://svn.eduke32.com/eduke32@2137 1a8010ca-5511-0410-912e-c29ae57300e0
that bunches and nextwall links are restores, too. Now, to coalesce two
TROR maps (e.g. for a CBP), one could
do for i allsectors, sethighlightsector i 1
on the console, and then load the 'other' map to copy over the contents
of the first, including all TROR stuff. Note that neither selecting
all sectors with RAlt, nor duplicating them with Insert would lead to
the desired effect (yet).
Internally,
- yax_setbunch() now has different behavior for bunchnums -1, -2 and -3
(it either clears the nextwalls or not)
- build.c has a helper function free_n_ptrs(). This could be handy in
other situations where many blocks of memory must be allocated
consecutively and freed in case of failure
git-svn-id: https://svn.eduke32.com/eduke32@2136 1a8010ca-5511-0410-912e-c29ae57300e0
suboptimal, but at least 'correct' and won't produce the aforementioned
corruptions anymore.
git-svn-id: https://svn.eduke32.com/eduke32@2135 1a8010ca-5511-0410-912e-c29ae57300e0
can be caused by copying map parts from one map to another (or a new one).
The copying system is slightly broken right now....
git-svn-id: https://svn.eduke32.com/eduke32@2133 1a8010ca-5511-0410-912e-c29ae57300e0
next{wall,sector} indices instead of using checksectorpointer() so
that the nextwalls will be restored exactly as they were (provided
that they are copied). Also fix tweaking the sectnums of sprites.
git-svn-id: https://svn.eduke32.com/eduke32@2132 1a8010ca-5511-0410-912e-c29ae57300e0
Called 'loop punching'. In addition to duplicating the loop, the inner
portions of the original and cloned loop are made into a new bunch, and
the loop walls are made to be neighbors, linking their movement to each
other. This gives a way to create island sectors with a differing
bunchnum in the midst of an already extended area.
Usage:
For an extended sector containing a CCW inner loop, select its points
using Ctrl+Shift. Press Ctrl-E to be queried whether to duplicate the
points into the upper or lower extension (even if it's unambiguous).
A number of conditions must be met for a successful 'punch', which
should hopefully be more or less obvious. Among them:
- loop walls should all be red
- the starting wall is only considered among the non-grayed-out ones
- the neighboring sector must not contain points inside or at the loop
git-svn-id: https://svn.eduke32.com/eduke32@2130 1a8010ca-5511-0410-912e-c29ae57300e0
would break out of the 2D mode loop when splitting a sector would exceed
limits.
git-svn-id: https://svn.eduke32.com/eduke32@2129 1a8010ca-5511-0410-912e-c29ae57300e0
helixhorned
terminx