This was implemented by adding a new inventory flag INVENTORY.NOTELEPORTFREEZE so that the effect can both be activated for other items and deactivated for the two that currently have it.
- WARPF_ADDHEIGHT adds the pointed actor's height to heightoffset, and adds to the pointed actor's z position.
- WARPF_MULHEIGHT multiplies the pointed actor's height by heightoffset, and adds to the pointed actor's z position. Overridden by ADDHEIGHT.
- Added filter and species parameter.
- Added new flags: RGF_INCLUSIVE, RGF_ITEMS, RGF_KILLED, RGF_EXFILTER, RGF_EXSPECIES, and RGF_EITHER.
- RGF_ITEMS: Items can receive inventory.
- RGF_KILLED: Actors who are truly dead might not be corpses, and vice versa.
- RGF_EXFILTER: Blacklists the specified actor filter. All but the filtered actor can receive the item.
- RGF_EXSPECIES: Blacklists the specified species. All but the filtered species can receive the item.
- RGF_EITHER: The actor can receive the item if it satisfies either the filter or the species. Only useful when both are used.
- RGF_INCLUSIVE: An actor marked as more than one pointer to the calling actor can ignore the exclusion pointers, but only if at least one is missing. I.e. an actor who is a target and tracer of the calling actor can still receive the item, if the calling actor doesn't pass RGF_NOTARGET and NOTRACER at the same time. RGF_INCLUSIVE only works with the pointer filtering flags. By default, if not specified, the actor will not be loopholed the item if they are under any one of the three filters.
- Fixed discrepancies and dependencies upon several flags and actor conditions which caused the function to fail.
- Overrides the NOTELEPORT flag so actors with velocity don't need to disable it in order to perform A_Teleport, which could be screwed up by a teleporting line or sudden ACS interference.
- Ensure that the result is set to false if it fails prematurely. Wasn't sure if this was needed, but with the upcoming if/else statements, better safe than sorry.
- (int ptr = AAPTR_TARGET, state high, state low, float offsethigh = 0, float offsetlow = 0, bool includeHeight = true)
- Jumps if the pointer of the calling actor is higher or lower than itself, adding offsethigh or offsetlow depending on the circumstance.
- includeHeight works twofold.
- Includes the height of the calling actor if the pointer is higher to truly determine if they are completely above them or not.
- Includes the height of the pointer if the pointer is lower.
- Disable it to only check z differences without adding height.
Conflicts:
src/dobjtype.cpp
src/p_conversation.cpp
src/p_local.h
src/p_things.cpp
src/thingdef/thingdef_properties.cpp
(This is just the conversationID to MAPINFO stuff to keep the conflicts as small as possible)
Conflicts:
src/d_main.cpp
src/info.cpp
src/p_local.h
(Had to merge this all by itself because it was creating too many merge conflicts when combined with other stuff.
- Fixed: P_MoveThing had source and destination fog spawning backwards.
- Fixed a case where the NOTELEPORT flag would be ignored on A_Teleport.
- Added pointer selection to A_Teleport. Defaults to AAPTR_DEFAULT (calling actor). State jumps will only be done by the calling actor.
* Changed the behavior of SetActorTeleFog.
- Don't force "null" to resolve to no actor since "none" is already defined as NULL (via FindClass). (This change also applies to the decorate properties.)
- Passing an empty actor name will keep the existing fog since there's otherwise no way set only one fog. Since "none" works to remove the fog, I see no reason not to have this option.
- Member variables are now declared all in one place: InitThingdef(). They
are not partially defined in thingdef_expression.cpp and further refined
in actor.txt.
- This left ParseNativeVariable() parsing only functions, so it has been
renamed to ParseNativeFunction().
- Note that their declarations in InitThingdef() are expected to be
temporary.
- Squashed commit of the following:
commit bc45fe3263d34ef5f746f524687999c19bf7b779
Author: Randy Heit <rheit@users.noreply.github.com>
Date: Sun Mar 1 18:51:05 2015 -0600
wave scale -> wave speed
commit ff96388b128c724c1198757bfa52f1935a263356
Author: Randy Heit <rheit@users.noreply.github.com>
Date: Sun Mar 1 18:45:32 2015 -0600
More sine quake fixes
commit 2a89749a6fe6d271b9fbdc218779f680afcf4cb6
Merge: 719dfbe 5456074
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sat Feb 28 20:37:22 2015 -0600
Added QF_WAVE to A_QuakeEx.
- Changes the random quakes into a sine wave (see Shadow Warrior/Rise of the Triad reboots, Hard Reset, etc.)
- Added 3 properties to control waves per second along each individual axis. Only works with QF_WAVE.
- Intensity X/Y/Z property becomes the amplitude of the wave.
- Stacks with regular quakes, allowing shaking along the camera which must be called using A_QuakeEx WITHOUT the flag, or the other quaking functions.
- Uses the youngest quake's time for positioning.
commit 54560741581e8d15cc7060e8e068cf85e9a4b432
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sat Feb 28 20:21:19 2015 -0600
Recommitted recommended changes by Randi, with some modifications. Now, we should be finished!
commit 6f4473013411686d88fc185bdc1cc58b1035b0f1
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sat Feb 28 12:52:57 2015 -0600
Finish this revert.
commit 467e53f9400f588a2ada9b32e7634cb1f4ad5066
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sat Feb 28 12:46:02 2015 -0600
Reverted back to what was working.
commit da9de56a67efda08036e481fd5fccd5392ce6810
Author: MajorCooke <paul.growney22@gmail.com>
Date: Thu Feb 26 18:53:20 2015 -0600
Forgot this bit, for testing.
commit c5093d9bb97caf8478cefc32abc56a036feeea58
Author: MajorCooke <paul.growney22@gmail.com>
Date: Thu Feb 26 18:52:46 2015 -0600
Some more progress, but...
- This did not solve anything. In fact, it did the opposite -- completely broke wave quakes. Now they only happen whenever a random quake is in progress.
- Left in the commented code on purpose so Randi can test it.
commit 7e526405d2127cbb279f66008c8f8e55a5d497f3
Author: MajorCooke <paul.growney22@gmail.com>
Date: Wed Feb 25 17:50:42 2015 -0600
- Use newest waveform timer, not oldest.
commit 1356443609dbc6c7f46e081d0846816dc0836124
Author: MajorCooke <paul.growney22@gmail.com>
Date: Wed Feb 25 17:32:09 2015 -0600
- Got regular quakes to multiply onto sine quakes, but the vice versa needs fixing too.
commit d95796c94c70cd0229d4a6d30f69e3a7568b9588
Author: MajorCooke <paul.growney22@gmail.com>
Date: Wed Feb 25 16:46:21 2015 -0600
- Last hurdle. Now just need to figure out how to properly scale up and down.
commit 4bc3458e689155ce72c09776604d9eb4fa73d8be
Author: MajorCooke <paul.growney22@gmail.com>
Date: Tue Feb 24 23:18:03 2015 -0600
- Fixed the quakes being unstackable.
commit b51012d6d4ea065bf7f6fc9c1a0472966491f7af
Author: MajorCooke <paul.growney22@gmail.com>
Date: Mon Feb 23 23:48:34 2015 -0600
QF_WAVE renamed from SINE.
- Lots of ground covered, but still more to go.
- Still need to figure out how to make the camera properly shudder.
commit 427e4893193470bbf45415ffec70a0b69b8cccfd
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sun Feb 22 16:52:30 2015 -0600
- Begin the groundworks for QF_SINE.
- Need to figure out how to rework and manipulate the sine wave to move faster, and to allow going below 0 without breaking it too much.
- When using both scaling flags, by default, the effect only reaches half peak going either way. This forces it to go all the way to the top (or bottom if using QF_MAX) before scaling back to its original height..
- QF_SCALEUP behaves like QF_SCALEDOWN: it gradually scales the tremors, only going upwards.
- QF_SCALEUP and QF_SCALEDOWN can be combined to make an earthquake that gradually smoothes in and out.
- QF_MAX can be used to invert this behavior, where it starts at the peak of the amplitude, fades out half way, and then grows back to maximum.
- Unlocks the full potential of using quakes, including the Z axis. Each intensity applies to X/Y/Z planes whenever a player is experiencing it.
- Flags:
- QF_RELATIVE - Adjusts the quaking of the camera to go in the direction its aiming (X: forward/backward. Y: Left/right.)
- Plans for including pitch will be implemented in the future for the Z axis with relativity.
I have no idea why this was ever deemed proper - but it clearly breaks some Hexen maps and it not even remotely mimics the original behavior. Even now, it's not the same but since the items fall down they at least end up where they are supposed to be.
- ang_offset: the extra angle to apply to the actor after calculating the maximum turn.
- pitch_offset: Just like ang_offset, with pitch instead.
- FAF_BOTTOM: Aim straight for the actor's z coordinate, not with +32 units.
- FAF_MIDDLE: Aims for the direct middle of the actor.
- FAF_TOP: Aims for the very top of the actor.
- FAF_NODISTFACTOR: Use the raw pitch offset without calculating it into the distance of the aimed actor.
- The error "You cannot pass parameters to..." used the most recent token,
which was always ( and not the function name. (Note that this was
already fixed in the scripting branch, so this is probably going to be a
conflict. Meh.)
- Added A_Warp flags:
- WARPF_BOB: Gets the bob offset of actor pointer with the FLOATBOB flag.
- WARPF_MOVEPTR: The function is inversed to move the pointed actor with applied flags, but only the original caller will make the success/jump.
- The definition of FxGlobalFunctionCall_CheckClass was big and scary. I
would say this is a big improvement, since now it gets to leverage the
same framework that action functions use.
- The definition of FxGlobalFunctionCall_IsPointerEqual was not so big and
scary, so this can't be called so much of an improvement as
CheckClass was. (Which is not to say that it isn't better anyway.)
- Rippers will rip through anything with an equivalent ripper level, or if their level is between or on the min and max ranges.
- If no min or max is defined, it simply checks if the monster's ripper level is lower than the missiles.
- Functions: A_SetRipperLevel(int level), A_SetRipMin(int min), A_SetRipMax(int max)
- Properties: RipperLevel, RipLevelMin, and RipLevelMax.
- RipperLevel: Applicable to monsters and projectiles.
- RipLevelMin and RipLevelMax are only useful on monsters.
- By default, all are 0.
Conflicts:
src/CMakeLists.txt
src/b_think.cpp
src/g_doom/a_doomweaps.cpp
src/g_hexen/a_clericstaff.cpp
src/g_hexen/a_fighterplayer.cpp
src/namedef.h
src/p_enemy.cpp
src/p_local.h
src/p_mobj.cpp
src/p_teleport.cpp
src/sc_man_tokens.h
src/thingdef/thingdef_codeptr.cpp
src/thingdef/thingdef_function.cpp
src/thingdef/thingdef_parse.cpp
wadsrc/static/actors/actor.txt
wadsrc/static/actors/constants.txt
wadsrc/static/actors/shared/inventory.txt
- Added register reuse to VMFunctionBuilder for FxPick's code emitter.
- Note to self: Need to reimplement IsPointerEqual and CheckClass, which
were added to thingdef_function.cpp over the past year, as this file no
longer exists in this branch.
- Do a filter and species check first to save time.
- Added DMSS/KILS/RMVF_EITHER, which means if the actor is of type or species, it counts.
- A_DamageTarget(20,"Normal",DMSS_EITHER,"DoomImp","CyberdemonSpecies")
- This affects actor DoomImp, and anything that's of species CyberdemonSpecies.
- Added a little more documentation via comments.
- Added two more flags for each of the functions, EXFILTER and EXSPECIES.
- Stands for "exclude filter/species" and makes the function not take them into account.
- Cleaned up the code and placed all the checking in their own subfunctions.
- The wiki said the minimum distance to teleport defaults to 0, actor.txt on the other hand said otherwise. I was wondering why it was still broken somewhat...
- Prevent stickiness from happening, a.k.a. getting stuck in ceiling or floor and letting the engine unstick the actor. This caused velocity loss.
- TF_KEEPVELOCITY: Keep the velocity after teleporting.
- TF_KEEPANGLE: Don't use the special spot's angle.
- TF_USESPOTZ: Normally, this function
- TF_NOSRCFOG: Don't leave fog at the previous location.
- TF_NODESTFOG: Don't leave fog at the arriving location.
- TF_USEACTORFOG: Use the actor's TeleFogSourceType and TeleFogDestType properties.
- TF_NOJUMP: Don't require or cause a jump. In this case, put 0 (or "") in for the jump destination when using CustomInventory items to teleport actors around.
- New properties include TeleFogSourceType and TeleFogDestType.
- TeleFogSourceType is the fog left behind where the actor teleported away from.
- TeleFogDestType is the fog the actor sees when it arrives at its destination.
- Added A_SetTeleFog(<oldpos>,<newpos>) -- oldpos sets TeleFogSourceType, newpos sets TeleFogDestType.
- CLOFF_SETTARGET | CLOFF_SETMASTER | CLOFF_SETTRACER
- An actor that causes A_CheckLOF (and only an actor) to succeed will set the intercepting actor as its target, master, and/or tracer, respectively.
- FTF_REMOVE: Removes the actor when the alpha hits a certain level.
- - A_FadeIn - 1.0
- - A_FadeOut - 0.0
- - A_FadeTo - Alpha target level reached
- FTF_CLAMP: Automatically fixes the alpha so it won't leave the range [0.0, 1.0].
- Added: A_TakeFromChildren
- Added: A_GiveToSiblings
- Added: A_TakeFromSiblings
- Added the following flags for A_RadiusGive:
- RGF_NOSIGHT: Exclude sight check from distance.
- RGF_MISSILES: Missiles can take inventory items.
- RMVF_MISSILES removes missiles.
- RMVF_NOMONSTERS ignores monsters.
- RMVF_MISC includes non-monsters and missiles.
- RMVF_EVERYTHING disregards all checks and remove it.
These flags now apply to the following in addition to the new function:
-A_RemoveTarget
-A_RemoveMaster
-A_RemoveTracer
-A_RemoveChildren
-A_RemoveSiblings
- Added A_KillTarget(damagetype, int flags).
- Added A_KillTracer(damagetype, int flags).
- Added A_RemoveTarget.
- Added A_RemoveTracer.
A_Kill (Master/Target/Tracer/Children/Siblings):
- KILS_FOILINVUL: foils invulnerability.
- KILS_KILLMISSILES: destroys projectiles. Does not work on invulnerable
projectiles without KILS_FOILINVUL, and doesn't work at all on missiles
with NODAMAGE flag.
- KILS_NOMONSTERS: actors that are monsters will not be killed.
A_Damage (Self/Target/Master/Tracer/Children/Siblings):
- DMSS_FOILINVUL: foils invulnerability.
- DMSS_AFFECTARMOR: damages the actor's armor instead of bypassing it
entirely.
- DMSS_KILL: damages the actor by its remaining health (useful for
modular DECORATE programming).
- Added A_SpawnItemEx flags:
- SXF_SETTARGET: sets the calling actor as the target.
- SXF_SETTRACER: sets the calling actor as the tracer.
Both of these functions take priority similar to SXF_SETMASTER over
SXF_TRANSFERPOINTERS.
Namely, acolyte, shadow acolyte, reaver, stalker, and turret. Info on
which states needed the slow flag was obtained with Quasar's permission
by looking at G_InitNew() in g_game.c and the info.c state tables from
Chocolate Strife.
Also added fast flag to acolyte states that needed it, based on the same
source.
- Fixed: Heretic and Hexen completely skip all normal Z processing on
mobjs with FLOATBOB set. To emulate that, we need to add NOGRAVITY to
everything with that flag set.
something that never autoaims, such as a railgun.
- Fixed: A_JumpIfTargetInLOS should use P_AimLineAttack() instead of P_BulletSlope(), because the
latter intentionally checks to the sides of the aimed line.
SVN r4007 (trunk)
- Changed Actor's Damage property into an actual function. All access to the damage property
must now be done through GetMissileDamage. actor->GetMissileDamage(0, 1) is equivalent
to the former actor->Damage, for the case where actor->Damage was not an expression. (I
suppose I will probably need to make a thunk for DECORATE expressions that want to read it.)
- Cleaned up some decorate expression evaluation functions that are no longer used.
SVN r3919 (scripting)
become ungodly slow when using mods with complex DECORATE. The GCC debug builds run just
fine, however. Hopefully this is something that can be fixed later with an assembly-optimized
version of the main VM loop, because I don't relish the thought of being stuck with GDB
for debugging.)
- Fixed: The ACS_Named* action specials were erroneously defined as taking strings instead of
names.
- Fixed: Copy-paste error caused FxMultiNameState::Emit to generate code that called
DecoNameToClass instead of DecoFindMultiNameState.
- Updated FxActionSpecialCall::Emit for named script specials.
- Fixed inverted asserts for FxMinusSign::Emit and FxUnaryNotBitwise::Emit.
SVN r3893 (scripting)
I could be clever and have the beggar chase after you some after you attack him, with a
random chance to cease pursuit. However, that didn't look much different from his normal
wandering animation, and he usually gave up before getting anywhere near you, so it was
kind of pointless. I kept the action functions around anyway, since they're simple things that
somebody else might find useful.
- Added a melee range check to A_SentinelRefire for actors without missile states. This fixes
Strife's Beggar trying to attack you when you're nowhere near him.
SVN r3863 (trunk)
and RTF_NOTMISSILE so that you can use A_Explode and A_RadiusThrust with non-missiles without
them telling P_RadiusAttack() that the target is the source.
SVN r3860 (trunk)
* GruntSpeed: The minimum speed a player must be falling at the time of landing to play *grunt.
* FallingScreamSpeed: When a player is falling within this range of speeds, they will play *falling.
SVN r3829 (trunk)
overridden in custom player classes by changing their Obituary property to something else.
- ClientObituary() now only looks up the obituary message from the killing player's weapon if the
damage type was 'Melee' or 'Hitscan'.
- Gave P_GunShot() and A_FireBullets the new damage type 'Hitscan'.
- Switched A_Saw and A_CustomPunch to the 'Melee' damage type.
SVN r3646 (trunk)
