In the normal game, these arrays are conceptually [MAX_WEAPONS][MAXPLAYERS],
allocated as CON per-player gamevars (e.g. WEAPONx_WORKSLIKE).
For Lunatic, they are replaced with
weapondata_t g_playerWeapon[MAXPLAYERS][MAX_WEAPONS].
git-svn-id: https://svn.eduke32.com/eduke32@3328 1a8010ca-5511-0410-912e-c29ae57300e0
Specifically, have a weapondata_t type mimicking the aplWeapon* arrays.
Keep a list weapondefaults[] which undergoes some static->dynamic tweaks
and then makes its way to the WEAPONx_XXX per-player gamevars.
git-svn-id: https://svn.eduke32.com/eduke32@3327 1a8010ca-5511-0410-912e-c29ae57300e0
- Rewrite the "clear background" routine in a no-brainer way instead of
juggling around with rotatesprite(). Make it common to game+editor.
Expose glRectd to glbuild.
- Don't stop OSD text line drawing when encountering a non-printable char.
Instead, treat it as space.
- In OSD_SetTextMode(), don't use swaplong (which really swaps 32-bit ints)
to swap pointers. Write an analogous "swapptr" instead.
- When changing from/to OSD, don't inject a pause key. This *might* have been
the cause of the reported pausing problems.
- clean up the code...
(Yes, this commit throws together too much stuff. I suck sometimes. :P)
git-svn-id: https://svn.eduke32.com/eduke32@3321 1a8010ca-5511-0410-912e-c29ae57300e0
Rotation-fixing happens for a couple of hard-coded statnums that presumably
never move (DEFAULT, STANDABLE, FX, FALLER, LIGHT), but for actors it wouldn't
make sense since the common case is that they do move. For this reason, bit 4
was introduced in r1934. The position of such useractors will not diverge
due to error roundoff accumulation in rotating sectors (SE0, train).
git-svn-id: https://svn.eduke32.com/eduke32@3316 1a8010ca-5511-0410-912e-c29ae57300e0
Unconditionally enabled, but useful for comparing the behavior of the 1-column
vline functions against the 2- or 4-column ones.
git-svn-id: https://svn.eduke32.com/eduke32@3311 1a8010ca-5511-0410-912e-c29ae57300e0
The former is really only a workaround. Walls/vertical sprites/pskies with
ysize 512 (and presumably greater, but this was not tested) are rendered
with one shade higher at the borders (1 pixel vlines) because of a certain
assumption in the ASM (see comments there). With very dark shades, the
palookup[] buffer is accessed oob. We simply allocate 256 bytes more at the
end for each.
The latter is only for CLASSIC_NONPOW2_YSIZE_WALLS builds, which is not enabled
yet. It seems to matter only for the uncommon case where the such pskies repeat
in the height. A 1680x1050 window fully covered with such a sky is then rendered
at about 60/85 the FPS for me (mostly due to not using the 4 pixel vline
routines), so it may be leaning a bit too much on the side of correctness.
A compilation switch DEBUG_TILESIZY_512 is introduced in engine.c for
demonstration purposes.
git-svn-id: https://svn.eduke32.com/eduke32@3310 1a8010ca-5511-0410-912e-c29ae57300e0
- If aiming at a swapped bottom wall, display "Wall <wallnum> -> <otherwallnum>"
- highlight pic, shade, pal, cstat in yellow then
- in printext256, accept at most 3 digits for the color format string (e.g. ^123)
git-svn-id: https://svn.eduke32.com/eduke32@3308 1a8010ca-5511-0410-912e-c29ae57300e0
That is, everything concerning orientation. Previously, it was wrongly
the bitwise NOT of these bits that got taken over. In particular, if bit
2 (swap bottom walls) would get pasted, ridiculousness could ensue.
git-svn-id: https://svn.eduke32.com/eduke32@3306 1a8010ca-5511-0410-912e-c29ae57300e0
Implemented using GL_LINEAR fog. The only source of difference (besides the
obvious indexed vs. true color) should now be the distance constant, which
still had to be determined experimentally. Polymer implements this mode in
its fog fragment program part.
Parallaxed skies are always drawn with full visibility, I'm not sure if there
are any maps that expect otherwise.
Also, accidentally committed: factor out initialization code from
polymost_printext256() into gen_font_glyph_tex(), small game.c changes.
git-svn-id: https://svn.eduke32.com/eduke32@3301 1a8010ca-5511-0410-912e-c29ae57300e0
It was caused by the definition of c_dfDIJoystick using literal 24 and 16 values in place of sizeof(DIDATAFORMAT) and sizeof(DIOBJECTDATAFORMAT), which include pointers. On 64-bit, the values end up being 32 and 24, causing a discrepancy in which DIERR_INVALIDPARAM was thrown.
1b1e05db06/diffs
git-svn-id: https://svn.eduke32.com/eduke32@3300 1a8010ca-5511-0410-912e-c29ae57300e0
- Updated to use StackWalk64 function call, requiring some addition of headers from MinGW-w64 to compile with MinGW.
- Code added to support 64-bit executables: functionality added and one warning fixed.
- New DLL binaries compiled using i686-MinGW-w64 and x86_64-MinGW-w64. (Oddly, the DLL built with MinGW is 5 MB while MinGW-w64's is 1 MB.)
git-svn-id: https://svn.eduke32.com/eduke32@3299 1a8010ca-5511-0410-912e-c29ae57300e0
This also means that the "r_shadescale_unbounded 0" option will work
in Polymer (except on models).
git-svn-id: https://svn.eduke32.com/eduke32@3286 1a8010ca-5511-0410-912e-c29ae57300e0
This global option will set bit 1024 and clear bits 256 and 512 for all
rotatesprite calls, fixing complex HUD drawing code relying on precise
alignment of individual elements (widescreen rotatesprite is entirely
unsuitable for this purpose).
git-svn-id: https://svn.eduke32.com/eduke32@3284 1a8010ca-5511-0410-912e-c29ae57300e0
This includes a complete Windows header and library refresh, including the addition of 64-bit compiled libs:
*libogg 1.3.0
*libvorbis 1.3.3
*zlib 1.2.7
*libpng 1.5.13
*libvpx 9a3de881c0e681ba1a79a166a86308bbc84b4acd
*SDL_mixer 1.2.12 (for RENDERTYPE=SDL)
*DirectX import libraries: dsound and dxguid (now included)
To build in 64-bit, you essentially need MinGW's MSYS (but not MinGW itself) and MinGW-w64 at the top of your PATH. The target is automatically detected using `$(CC) -dumpmachine`. The EDukeWiki will get detailed instrucitons.
All compiler and linker warnings when building in 64-bit mode have been fixed.
Remaining 64-bit to-do:
- The ebacktrace dll does not build under 64-bit. It uses code specific to the format of 32-bit executables and will have to be ported to work with 64-bit executables. A future 64-bit version will be named ebacktrace1-64.dll.
- RENDERTYPE=SDL crashes in SDL_mixer's Mix_Linked_Version().
- DirectInput gives an error and does not function. This only affects joysticks, and the error never happens without any plugged in.
- Port the classic renderer ASM to 64-bit. (Just kidding, this is way out of my league.)
This commit includes a fair bit of Makefile development spanning all platforms, including simplifying the SDLCONFIG code, fixing build on Mac OS X (thanks rhoenie!), globally factoring Apple brew/port inclusion, enforcing that all -L come before all -l, and ensuring that $(shell ) is always :='d.
In addition, I have resurrected the old GCC_MAJOR and GCC_MINOR detection using `$(CC) -dumpversion`, but I have made it failsafe in case the command fails or the version is manually specified. I have applied this new fine-grained detection where applicable, including allowing LTO, and restraining -W's to versions that support them.
git-svn-id: https://svn.eduke32.com/eduke32@3278 1a8010ca-5511-0410-912e-c29ae57300e0
Set up the use of {Windows,Apple}/{include,lib} regardless of feature toggles in Makefile.common using $(abspath ) in reference to the directory Makefile.common is in.
Add the three DirectX headers that are actually used to the repo. (from: http://alleg.sourceforge.net/files/dx9mgw.zip)
Since current MinGW versions include DirectX libs (for dynamic linking), remove "-L$(DXROOT)/lib".
The DirectX headers are no longer a separate dependency for building.
Add $(SDLROOT_OVERRIDE). $(SDLROOT) only functions for Windows and Mac OS X.
Factor handling of $(DXROOT_OVERRIDE) and $(SDLROOT_OVERRIDE) into Makefile.shared using $(abspath ).
git-svn-id: https://svn.eduke32.com/eduke32@3275 1a8010ca-5511-0410-912e-c29ae57300e0
Also, fix deficient logic in Gv_Free and Gv_Clear (both M32 and CON) so that gamevar and gamearray erasure results are (closer to) correct, and so that the game does not crash when system arrays are accessed from CON because they all have been nulled.
git-svn-id: https://svn.eduke32.com/eduke32@3274 1a8010ca-5511-0410-912e-c29ae57300e0
As a note, libvorbis' vorbis_comment_query() checks for tags case-insensitively.
(This was done to support the output of vgmstream's "test.exe -g".)
git-svn-id: https://svn.eduke32.com/eduke32@3273 1a8010ca-5511-0410-912e-c29ae57300e0
Disabling netcode compilation can be interesting on memory-constrained
systems, or those that have no means of accessing the network anyway.
Note: I'm OK with maintaining this myself, i.e. it's fine if netcode dev
breaks compilation with NETCODE=0.
git-svn-id: https://svn.eduke32.com/eduke32@3260 1a8010ca-5511-0410-912e-c29ae57300e0
... instead of switch/case-ing them in A_CheckEnemyTile().
Because this requires bumping BYTEVERSION, we also get rid of the
excess trailing bytes in the save game's "rest" data. (See r3052.)
git-svn-id: https://svn.eduke32.com/eduke32@3257 1a8010ca-5511-0410-912e-c29ae57300e0
That is, fix some oversights introduced in the preceding runs.
listglobals.sh is a helper to find global accesses.
Translator: add "number-conversion" warning option, max. error limit.
git-svn-id: https://svn.eduke32.com/eduke32@3256 1a8010ca-5511-0410-912e-c29ae57300e0
- more codegen
- make more members const, some char unsigned
- fix some "geom" metamethods
- '^' operator
git-svn-id: https://svn.eduke32.com/eduke32@3253 1a8010ca-5511-0410-912e-c29ae57300e0
If you see any weird behavior in synthesis builds after this change, please
let Plagman know!
git-svn-id: https://svn.eduke32.com/eduke32@3233 1a8010ca-5511-0410-912e-c29ae57300e0
Commit breaks MSVC builds by failing to provide NOWARN macros to MSVC.
git-svn-id: https://svn.eduke32.com/eduke32@3232 1a8010ca-5511-0410-912e-c29ae57300e0
The attribute is set per tile from DEF: either
nofullbrightrange <begintile> <endtile>
or
tilefromtexture <tile> { ... nofullbright ... }
As a special case, the list may only contain "nofullbright", in which case the
texture is not changed. (This is analogous to "texhitscan".)
Example:
// make piggy's eyes fullbright red only when it fires the shotgun
nofullbrightrange 2000 2034
nofullbrightrange 2040 2049
nofullbrightrange 2055 2061
git-svn-id: https://svn.eduke32.com/eduke32@3230 1a8010ca-5511-0410-912e-c29ae57300e0
The two uses are from hitscan and neartag. The functionality is reproduced
exactly (assuming I made no mistake), down to different distance checking
(<= vs. <).
git-svn-id: https://svn.eduke32.com/eduke32@3228 1a8010ca-5511-0410-912e-c29ae57300e0
This introduces winbits.[ch] in the engine, containing layer-independent code migrated from winlayer, including nedmalloc, ebacktrace1, OS version detection, and high-resolution profiling timers.
sdlayer has been expanded to include the code from winbits under _WIN32.
All uses of RENDERTYPEWIN in the source have been examined and changed to _WIN32 (or removed) where the block in question is layer-independent.
git-svn-id: https://svn.eduke32.com/eduke32@3221 1a8010ca-5511-0410-912e-c29ae57300e0
This needs improvements to bring it up to par with winlayer, but it is functional. In particular, a good amount of code from winlayer could be used for both layers, including the profiling timers, the version printing code, and the hInstance and hModule sharing.
Known problems: the mouse cursor is not trapped, and the game starts before the startup window shows options.
git-svn-id: https://svn.eduke32.com/eduke32@3219 1a8010ca-5511-0410-912e-c29ae57300e0
Loops are controlled by two tags in the Vorbis Comment, both in PCM samples.
LOOP_START holds the beginning of the loop, the position to which playback returns at the end of the loop.
LOOP_END is optional; it holds the end of the loop, after which the game seeks to LOOP_START. If undefined, the end of the OGG is the end of the loop. The primary purpose of LOOP_END is if you want to give your file a proper ending for listening outside the game.
To preview a looped OGG you have assembled, give it a ".logg" extension and play it using the vgmstream plugin for Winamp or foobar2000.
git-svn-id: https://svn.eduke32.com/eduke32@3218 1a8010ca-5511-0410-912e-c29ae57300e0
The redundant ones are in code like this: s->cstat = (int16_t)32768;
Because the value is eventually converted to the type of "s->cstat", any
casts to integral types having at least as many bits are no-ops, signedness
being irrelevant due to (probably any two's complement arch targeting
compiler's) bit-pattern preserving semantics of these conversions.
The now incorrect one is: if (lotag == (int16_t) 65535),
"int32_t lotag" being read from a wall or sprite struct directly earlier.
Now, with these members being unsigned, and (int16_t)65535 equalling -1,
the check always fails. The correction fixes normal switches having such
a lotag ending the level immediately.
In short: integer casts before assignments are unnecessary, those in reads
highly relevant!
git-svn-id: https://svn.eduke32.com/eduke32@3211 1a8010ca-5511-0410-912e-c29ae57300e0
Rewriting them in the obvious way, i.e. by casting the expression
to int16_t first. (That is, this commit is the reverse of r3174,
but with casts applied.) This fixes at least one regression: a
FIREEXT with a hitag of 0 should not be linked with same-
(that is, zero-) tagged SEENINEs or OOZFILTERs.
Mind the corner cases!
git-svn-id: https://svn.eduke32.com/eduke32@3210 1a8010ca-5511-0410-912e-c29ae57300e0
- provide functions instead of messing with CONTROL_*Binds directly
- comment out a few more unused functions
- make clear what memory (alloc'd or const char *) 'keybind' members use
- for keys with no name, use "<?>"
git-svn-id: https://svn.eduke32.com/eduke32@3209 1a8010ca-5511-0410-912e-c29ae57300e0
This function also changed: it doesn't handle floor-aligned sprites now,
and the z offset is returned instead of set by pointer.
git-svn-id: https://svn.eduke32.com/eduke32@3205 1a8010ca-5511-0410-912e-c29ae57300e0
Using non-keypad [-]/[+] or LMB + mousewheel, it was broken when a void
tile was in between.
git-svn-id: https://svn.eduke32.com/eduke32@3203 1a8010ca-5511-0410-912e-c29ae57300e0
The size of that struct is currently 4, and its layout almost the same as
what is read in with loadpics(). The number of tiles in an animation is
bumped to 256, so that the max. tile difference in DEF's animtilerange is
255. (There's no way to have such animations from ART.)
git-svn-id: https://svn.eduke32.com/eduke32@3202 1a8010ca-5511-0410-912e-c29ae57300e0
This means that the internal change done to these sprite members in r3159 is
hidden from CON for backward-compatibility purposes. Note that .cstat and
.{ceiling,floor}stat aren't touched, and will return unsigned values to CON.
git-svn-id: https://svn.eduke32.com/eduke32@3189 1a8010ca-5511-0410-912e-c29ae57300e0
I think this may fix some negative "non-profiled overhead" that I
have been seeing.
git-svn-id: https://svn.eduke32.com/eduke32@3182 1a8010ca-5511-0410-912e-c29ae57300e0
Notes:
- Atomic Edition (Censored) -> Plutonium Pak in grpscan.c
- "scale" in astub.c:drawtileinfo() is incorrect, I think.
- in demo.c, the gethitickms() value should be returned to a double.
git-svn-id: https://svn.eduke32.com/eduke32@3178 1a8010ca-5511-0410-912e-c29ae57300e0
NOTE: changes such as these are best viewed with something like
git diff (...) --color-words='[a-zA-Z0-9_]+|[^[:space:]]'
git-svn-id: https://svn.eduke32.com/eduke32@3176 1a8010ca-5511-0410-912e-c29ae57300e0
Note the type change of vplce[] in engine.c: int32_t -> uint32_t.
git-svn-id: https://svn.eduke32.com/eduke32@3172 1a8010ca-5511-0410-912e-c29ae57300e0
This reverts r3159..r3161.
Conflicts:
eduke32/build/include/compat.h
(Handled so that r3163's changes are kept applied.)
git-svn-id: https://svn.eduke32.com/eduke32@3165 1a8010ca-5511-0410-912e-c29ae57300e0
- Eliminate use of the C++ standard library from arttool. I improved some of the program's workings but it continues to corrupt my art files in certain circumstances. (Note: Not a regression; it happens with previous revisions.)
- Construct "make utils" for the game side following the pattern of the engine.
- Move ivfrate to this new distinction.
- Minor Makefile cleanup and tweaks, mainly to facilitate CLANG=1 and to formalize text output in special cases.
git-svn-id: https://svn.eduke32.com/eduke32@3163 1a8010ca-5511-0410-912e-c29ae57300e0
I think there's also a fix for the CON precache system breakage in here (lost it in my local tree when I started getting the C++ build working in MSVC, sorry!)
git-svn-id: https://svn.eduke32.com/eduke32@3159 1a8010ca-5511-0410-912e-c29ae57300e0
Specifically, if the first wall of the sector-to-split is to the left or right
of the *start* of the splitting line AND the sector has no TROR extensions,
make these two the new nextwalls of the respective split sectors.
git-svn-id: https://svn.eduke32.com/eduke32@3157 1a8010ca-5511-0410-912e-c29ae57300e0
Exporting only (de)compression functions. Also, different reader/writer
functions can be set.
git-svn-id: https://svn.eduke32.com/eduke32@3153 1a8010ca-5511-0410-912e-c29ae57300e0
It would be something like "ProjectileData\[([^]]+)]\.([a-z_]+)".
git-svn-id: https://svn.eduke32.com/eduke32@3152 1a8010ca-5511-0410-912e-c29ae57300e0
This requires ripping out the .proj member of tiledata_t back into
ProjectileData[] again because it was the only one in g_tile[] that
changed during the course of a game. The g_tile[] array is now also
correctly flagged as "constant throughout a game" (DS_NOCHK).
Savegame version bumped.
git-svn-id: https://svn.eduke32.com/eduke32@3151 1a8010ca-5511-0410-912e-c29ae57300e0
It's still not pretty though since there's no interpolation from G_DrawRooms().
git-svn-id: https://svn.eduke32.com/eduke32@3149 1a8010ca-5511-0410-912e-c29ae57300e0
On the engine side (functions starting with L_), there are now the basic
parts like state creation and running code from strings and files.
The game and editor can add to that by e.g. loading whatever they please
into the state. Their functions start with El_ and Em_, respectively.
The Lua scripts still reside in source/lunatic, even for the common ones.
This is because they will be embedded into the binaries as bytecode or
compressed source eventually, so their location on disk will be irrelevant.
git-svn-id: https://svn.eduke32.com/eduke32@3148 1a8010ca-5511-0410-912e-c29ae57300e0
Also, enable showing sprites in Mapster32's overhead view again, since that
was one (the only?) use of that code path. The uninitialized read was
introduced in r2927.
git-svn-id: https://svn.eduke32.com/eduke32@3144 1a8010ca-5511-0410-912e-c29ae57300e0
Also, reorganize some G_DrawRooms() code a little without changing anything.
git-svn-id: https://svn.eduke32.com/eduke32@3143 1a8010ca-5511-0410-912e-c29ae57300e0
Instead of later in P_ProcessInput(). This fixes one drawrooms() call in
between where the sectnum is the camera's, but the position the player's,
which can lead to a slow "outer view" render in Polymer.
git-svn-id: https://svn.eduke32.com/eduke32@3142 1a8010ca-5511-0410-912e-c29ae57300e0
arrays; any write access to them will run the corresponding hook and write
to the [sector/wall/sprite/tsprite]clean array.
Note: tsprite and sprite use the same hook and require running a few more
instructions per access in order to disambiguiate; this could be made more
optimal (like the other arrays) by clearly separating the types in the game
code.
Note #2: taking a member's address currently marks it dirty because of tons
of helper functions across the editor code. I don't know how many read-only
accesses we have after taking a member address, but it could also be fixed
with some finessing of the code.
git-svn-id: https://svn.eduke32.com/eduke32@3138 1a8010ca-5511-0410-912e-c29ae57300e0
The command-line utility can query and set the frame rate of IVF files, since
apparently encoders don't care too much about setting proper values in the IVF
header. Also, add the utility to the synthesis build.
On the playback side in EDuke32, get rid of the 1/(2*fps) "correction" if the
FPS numerator is <1000 (presumably used in older encoders) and properly print
the frame rate's fractional part.
git-svn-id: https://svn.eduke32.com/eduke32@3131 1a8010ca-5511-0410-912e-c29ae57300e0
This means that the "Keyboard Setup" should now properly reflect the bindings,
except in the theoretical case of one gamefunc being bound more than two keys.
(What was fixed is the one key to many gamefuncs case.)
git-svn-id: https://svn.eduke32.com/eduke32@3126 1a8010ca-5511-0410-912e-c29ae57300e0
That section was only ever read in for little profit and never written
out! Keyboard input is actually dispatched as OSD commands for a good
while, so that old cruft has to go!
git-svn-id: https://svn.eduke32.com/eduke32@3125 1a8010ca-5511-0410-912e-c29ae57300e0
- Remove everything using CONTROL_KeyMapping, which was only written to.
- Remove unused functions, make local ones static.
- Remove private function declarations in _control.h.
git-svn-id: https://svn.eduke32.com/eduke32@3124 1a8010ca-5511-0410-912e-c29ae57300e0
separate tracker type by #defining __TRACKER_NAME and __TRACKER_GLOBAL_OFFSET.
eg.:
Then if you have a tracked value and a value of the same type at the given offset:
Tracker_1<int32_t> trackedInt;
int32_t trackedIntDirty = 0; // 4 bytes after
trackedIntDirty will become 1 everytime trackedInt changes.
git-svn-id: https://svn.eduke32.com/eduke32@3119 1a8010ca-5511-0410-912e-c29ae57300e0
Credit to Plagman for the idea and doing the work on the game side, which is included in this commit.
(Building as C++ will give us features with which we can make improvements and optimizations on the multiplayer code and Polymer.)
git-svn-id: https://svn.eduke32.com/eduke32@3116 1a8010ca-5511-0410-912e-c29ae57300e0
This is done by pressing LShift and
- holding down the left mouse button for scaling, or
- the right mouse button for rotating the highlighted walls/sprites
with respect to a pivot point determined as the center of the bounding box of
all highlighted points.
Note that scaling sectors isn't that easy and the current functionality is very
rudimentary: there's no z scaling, no xrepeat correction, and sprites aren't
touched expect for their position. The user is responsible to maintain map
consistency, for example to prevent wall-lines of the same sector crossing
each other.
git-svn-id: https://svn.eduke32.com/eduke32@3113 1a8010ca-5511-0410-912e-c29ae57300e0
We do this by messing with the GL texture that gets uploaded for CHAINGUN.
Since this is implemented on the engine side, the static value for CHAINGUN
(2536) is used, and the tile dimensions are compared to 211x55 to have a
little confidence that the tile wasn't overridden by a mod. Hack indeed.
git-svn-id: https://svn.eduke32.com/eduke32@3111 1a8010ca-5511-0410-912e-c29ae57300e0
Currently, the FPS determination is based on libvpx's vpxdec.c code, which uses
the FPS provided in the IVF file in one case, and simply sets it to 30 FPS in
the other. For the first case, a "correction" is carried out for something
which the comments suggest to originate from other (old?) VPX encoder versions.
git-svn-id: https://svn.eduke32.com/eduke32@3110 1a8010ca-5511-0410-912e-c29ae57300e0
When LShift is pressed and the mouse is over a linking sprite (as determined by
the tag labeling system), lines are drawn to all other sprites, and pressing
[ or ] will cycle these then. False positives and missed sprites are possible.
Additional changes:
- consider SE 31 and 32's lotag to NOT be linking, since the ACTIVATOR is what
matters. The original maps are inconsistent there.
- When pressing Alt+[ or Alt+] and there are no corruptions, say so instead of
doing [ or ].
git-svn-id: https://svn.eduke32.com/eduke32@3108 1a8010ca-5511-0410-912e-c29ae57300e0
This event is useful in certain circumstances where you want to skip a menu/screen value and the design of the monster switch statement would require the M_ChangeMenu() call to be intercepted or the unwanted screen will flash for a split second.
git-svn-id: https://svn.eduke32.com/eduke32@3101 1a8010ca-5511-0410-912e-c29ae57300e0
These control the maximum difference in height between two sectors that the player will automatically traverse without needing to jump.
The latter controls the special case when the player's sector's lotag is ST_1_ABOVE_WATER or p->spritebridge == 1.
BYTEVERSION bumped.
git-svn-id: https://svn.eduke32.com/eduke32@3100 1a8010ca-5511-0410-912e-c29ae57300e0
* Centralize optimization strategies in Makefile.common. This required moving detection of $(PLATFORM), which makes sense if we work on the paradigm that Makefile.common is for generic compiler setup and Makefile.shared works with libraries and things closer to the engine and game code itself.
* New Makefile variables OPTOPT (Optimization Options) and CUSTOMOPT (Custom Optimizations). OPTOPT by default contains -march, -mtune, etc. Setting this variable from Make invocation will blank these. CUSTOMOPT (Custom Optimizations) works the same but in an additive fashion, overwriting nothing. Technically CUSTOMOPT could stand for (Custom Options) and include any additional parameters sent to both linker and compiler.
* Factor out literal names of the main executables.
* The build process now prints assembler (if NOASM=0) and linker settings in addition to compiler settings.
git-svn-id: https://svn.eduke32.com/eduke32@3096 1a8010ca-5511-0410-912e-c29ae57300e0
This commit also adds the NOTELEPORT sprite flag, which of course prevents sprites from teleporting.
git-svn-id: https://svn.eduke32.com/eduke32@3094 1a8010ca-5511-0410-912e-c29ae57300e0
And hook it up to SE cstat 64 ('1' in mapster32). This disables both lightmaps
and shadow maps for the spotlight; please let me know if you have a usecase
where you want lightmaps but no shadow maps for specific lights.
git-svn-id: https://svn.eduke32.com/eduke32@3091 1a8010ca-5511-0410-912e-c29ae57300e0
The attribute is set per tile from DEF: either
texhitscanrange <begintile> <endtile>
or
tilefromtexture <tile> { ... texhitscan ... }
(As a special case, the list may only contain "texhitscan", in which case the
texture is not changed.)
In passing, do some cleanup for "tilefromtexture" DEF parsing: the list tokens
should now be accepted in any order, and errors don't appear in the middle of
the list parsing.
git-svn-id: https://svn.eduke32.com/eduke32@3078 1a8010ca-5511-0410-912e-c29ae57300e0
Submersion only happens when the upper sector has lotag 1 and its vertical
neighbor has lotag 2 (this can be useful to create non-submergible above-water
sectors). Currently, only the player is handled. On the implementation side,
the water handling code is split into P_Submerge() and P_Emerge() preparing the
"teleportation", and P_FinishWaterChange() for the finalization.
git-svn-id: https://svn.eduke32.com/eduke32@3072 1a8010ca-5511-0410-912e-c29ae57300e0
Initial determination is based purely on distance/volume, and if two qualifying sounds have the same distance/volume the one which started playback first is the one that gets the axe.
Feedback from other developers welcome.
git-svn-id: https://svn.eduke32.com/eduke32@3065 1a8010ca-5511-0410-912e-c29ae57300e0
Going to extremes to avoid code duplication like the plague, but at
least it's great to learn about the whole function environment business.
git-svn-id: https://svn.eduke32.com/eduke32@3060 1a8010ca-5511-0410-912e-c29ae57300e0
The Makefile now has separate {GAME,EDITOR}LDFLAGS, so the correct
dynamic symbol list can be specified.
git-svn-id: https://svn.eduke32.com/eduke32@3057 1a8010ca-5511-0410-912e-c29ae57300e0
sizeof(_prlight) differs across compilers, and besides, Polymer lights were
not loaded anyway (they're restored live in-game later). The savegame version
was not bumped, but only savegames made with builds where sizeof(_prlight)==261
(like synthesis) will stay compatible!
Report and helpful debugging information by LeoD.
git-svn-id: https://svn.eduke32.com/eduke32@3052 1a8010ca-5511-0410-912e-c29ae57300e0
... and displaying statistics afterwards. It was easier to do it this way
than porting stat.lua to C and especially adding more logic to the already
spaghetti-like demo playback code.
git-svn-id: https://svn.eduke32.com/eduke32@3049 1a8010ca-5511-0410-912e-c29ae57300e0
Instead of having 'noalreadyrefd' as a 'corruptcheck' subcommand.
This way, TAB completion can be had.
git-svn-id: https://svn.eduke32.com/eduke32@3047 1a8010ca-5511-0410-912e-c29ae57300e0
This means that loadoldboard() now should also initialize Polymer map
info after loading a v5/v6 map. Make the variables holding a file descriptor
an int32_t instead of int16_t.
git-svn-id: https://svn.eduke32.com/eduke32@3044 1a8010ca-5511-0410-912e-c29ae57300e0
- make inside_editor() static in build.c
- replace comparisons of inside()'s return values with 0 by ones with 1
(since a returned 0 can mean -1 or 1, i.e. oob sector or is really inside)
- prevent a theoretically possible oob access in correct_ornamented_sprite()
git-svn-id: https://svn.eduke32.com/eduke32@3038 1a8010ca-5511-0410-912e-c29ae57300e0
- factor out the "is inside" predicates
- rename updatesector_onlynextwalls() -> updatesectorbreadth()
- add ATTRIBUTE((nonnull(4))) to the bitmap arg of updatesectorexclude().
git-svn-id: https://svn.eduke32.com/eduke32@3037 1a8010ca-5511-0410-912e-c29ae57300e0
It's mostly taking over the NASM code, with a couple of changes:
- declarations for externals and globals are slightly different
- the masm seems to have e.g. "dword ptr [...]" where the nasm has only
"dword [...]", though the masm also has a couple of the latter. The "ptr"
modifier seems kinda redundant to me, but I added it to every indirection
anyway.
git-svn-id: https://svn.eduke32.com/eduke32@3033 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, we used them in our builds for sprites, but MSVC builds don't have
the ASM ported to MASM, and thus the workaround of ignoring the linking errors
was not safe.
git-svn-id: https://svn.eduke32.com/eduke32@3031 1a8010ca-5511-0410-912e-c29ae57300e0
Also, add convenience wrapper script findmaps.sh for quickly searching for
sprites/walls/sectors satisfying a certain condition in all map files under
a given directory.
git-svn-id: https://svn.eduke32.com/eduke32@3030 1a8010ca-5511-0410-912e-c29ae57300e0
Requested auto-correction will place such sprites at their sector's first point.
git-svn-id: https://svn.eduke32.com/eduke32@3029 1a8010ca-5511-0410-912e-c29ae57300e0
Hendricks found a bug caused by that commit, so this one enables exprimentation
with setbrightness() bit 1 behavior.
git-svn-id: https://svn.eduke32.com/eduke32@3025 1a8010ca-5511-0410-912e-c29ae57300e0
See the comment in source/osdcmds.c for instructions on its usage.
git-svn-id: https://svn.eduke32.com/eduke32@3021 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the splitscreen mod not have a ridiculous view distortion.
Such scenes will have no correction for non-square pixels, though.
git-svn-id: https://svn.eduke32.com/eduke32@3020 1a8010ca-5511-0410-912e-c29ae57300e0
While we're at it, factor out duplicate code into P_ChangeWeapon().
git-svn-id: https://svn.eduke32.com/eduke32@3015 1a8010ca-5511-0410-912e-c29ae57300e0
Specifically, use the elevator's own ceiling z height instead of searching
nextsectors with nextsectorneighborz(). This makes maps like L9.map (Spaceport
from N64) or DEMOUNT.MAP work. [Note well: work at all, since if it happened
to work before, that was pure coincidence.]
git-svn-id: https://svn.eduke32.com/eduke32@3013 1a8010ca-5511-0410-912e-c29ae57300e0
- duke3d.h: comment the timing marcos a bit more
- factor out smoothratio calculation
- (TICRATE/TICSPERFRAME) --> REALGAMETICSPERSEC
git-svn-id: https://svn.eduke32.com/eduke32@3007 1a8010ca-5511-0410-912e-c29ae57300e0
Also, correct some comments made in the demo source made earlier. Oops.
git-svn-id: https://svn.eduke32.com/eduke32@3006 1a8010ca-5511-0410-912e-c29ae57300e0
A new function maybe_append_ext() is added to common.c and used in the handling
of the -d<demo.edm> cmdline parameter and the 'map' OSD command with one
non-wildcard arg. (It's slightly different from the way the extension was
maybe-appended previously.)
git-svn-id: https://svn.eduke32.com/eduke32@3004 1a8010ca-5511-0410-912e-c29ae57300e0
Also, don't stop playback cycling at the 10th demo and show the demo
number when beginning to record one.
git-svn-id: https://svn.eduke32.com/eduke32@3003 1a8010ca-5511-0410-912e-c29ae57300e0
This currently says that MP saving/loading isn't supported, but doesn't
really work correctly. Also, properly bound-check the immediate argument
to CON's 'save' command and one more ... -> G_HandleAsync().
git-svn-id: https://svn.eduke32.com/eduke32@2999 1a8010ca-5511-0410-912e-c29ae57300e0
... and use it in three places. In two of these uses,
1) CON {read,write}arrayfromfile and
2) G_SavePlayer,
display an error message if the file name such generated is too long.
In the CON commands of 1), also error out if the file couldn't be opened.
git-svn-id: https://svn.eduke32.com/eduke32@2997 1a8010ca-5511-0410-912e-c29ae57300e0
A macro MAYBE_FCLOSE_AND_NULL(fileptr) is introduced in compat.h that does
what it says.
git-svn-id: https://svn.eduke32.com/eduke32@2995 1a8010ca-5511-0410-912e-c29ae57300e0
This trims four 4k pages of code from the release EDuke32 build and
one page from Mapster32.
git-svn-id: https://svn.eduke32.com/eduke32@2991 1a8010ca-5511-0410-912e-c29ae57300e0
When this happens, parallaxmodes other than 0 will be unavailable and silently
draw as parallaxmode 0. This usually happens with extremely wide resolutions.
git-svn-id: https://svn.eduke32.com/eduke32@2990 1a8010ca-5511-0410-912e-c29ae57300e0
We're pulling stuff from math.h even in non-GL builds right now, so
adding libc's sin() and atan() doesn't seem like a big deal. In the
unlikely event that their accuracy is so bad that the calculated tables
don't match the original ones, a warning is issued on little-endian
platforms.
git-svn-id: https://svn.eduke32.com/eduke32@2988 1a8010ca-5511-0410-912e-c29ae57300e0
This is one of the cases where the duplicated code has minor modifications
at each site. These are handled by function args here.
git-svn-id: https://svn.eduke32.com/eduke32@2983 1a8010ca-5511-0410-912e-c29ae57300e0
For reference, they are the following:
- cache1d.c: suckcache()
- build.c: compare_wall_coords()
- make switch-invisible heuristic
- Mapster32: old sprite search
- Mapster32: manual z range
- m32script: read/writearray, qgetsysstr
- menus.c: savetemp()
git-svn-id: https://svn.eduke32.com/eduke32@2981 1a8010ca-5511-0410-912e-c29ae57300e0
Playing around with Coccinelle's semantic patches... be prepared for more.
git-svn-id: https://svn.eduke32.com/eduke32@2979 1a8010ca-5511-0410-912e-c29ae57300e0
Well, this never worked anyway, but invoking demons flying out of your
nose is never a good idea.
git-svn-id: https://svn.eduke32.com/eduke32@2977 1a8010ca-5511-0410-912e-c29ae57300e0
Note that since setting RETURN did nothing before, there is no backwards compatibility to uphold. Therefore, setting RETURN to 1 will cause the pistol to be selected, not disable the event. Set RETURN to -1 to cancel switching.
git-svn-id: https://svn.eduke32.com/eduke32@2976 1a8010ca-5511-0410-912e-c29ae57300e0
1. EVENT_PREGAME
2. hardcoded stuff
3. EVENT_GAME
One potential use is to examine values which are clobbered by commands such as ifhitweapon/ifwasweapon.
git-svn-id: https://svn.eduke32.com/eduke32@2973 1a8010ca-5511-0410-912e-c29ae57300e0
The spawn-time SE 17 setup uses nextsectorneighborz() which can fail
(return -1) on some circumstances and would cause an OOB sector[] access.
git-svn-id: https://svn.eduke32.com/eduke32@2971 1a8010ca-5511-0410-912e-c29ae57300e0
This is mostly for debugging, since currently, Mapster32 restores sprites
not in the same order as the original sprite index order. Also, expose
this option from map2text.lua and mapdiff.sh.
git-svn-id: https://svn.eduke32.com/eduke32@2968 1a8010ca-5511-0410-912e-c29ae57300e0
This is really an artifact of overloading the sector fields for different uses.
For copy-pasting TROR'd portions, the bug still persists.
git-svn-id: https://svn.eduke32.com/eduke32@2963 1a8010ca-5511-0410-912e-c29ae57300e0
Basically, base palettes with lower indices trump higher ones. For example,
when one player is underwater and the other above, the normal palette takes
precedence.
git-svn-id: https://svn.eduke32.com/eduke32@2955 1a8010ca-5511-0410-912e-c29ae57300e0
Currently, the only kinds of tint that can be applied simultaneously are
one "palfrom" per player, plus one loogie tint per player. Each palfrom
still overrides the preceding one. However, this is not a big problem IMO
since palfroms decrease at the same rate (loogie tint decreases at half the
speed). This change is especially good for the splitscreen mod, since now
the tints of the two players won't compete with each other. See the comment
in the source for some properties of the blending formula.
git-svn-id: https://svn.eduke32.com/eduke32@2954 1a8010ca-5511-0410-912e-c29ae57300e0
A debug macro to test tints being stuck at the least intense non-zero value
is provided in engine.c.
git-svn-id: https://svn.eduke32.com/eduke32@2952 1a8010ca-5511-0410-912e-c29ae57300e0
Reverved quotes are ones like "Killed by xxx". Since they're only
shown for the first player for now, printing them in the upper part
makes more sense (in above/below split, the first player is above).
git-svn-id: https://svn.eduke32.com/eduke32@2950 1a8010ca-5511-0410-912e-c29ae57300e0
To enable it, the HUD-less (maximized) screen size must be selected.
git-svn-id: https://svn.eduke32.com/eduke32@2944 1a8010ca-5511-0410-912e-c29ae57300e0
Because rotating sectors "smoothly" by 1 BUILD ang will quickly accumulate
roundoff error, this lets the user first do that as a preview and then use the
manual angle rotation do carry it out for real.
git-svn-id: https://svn.eduke32.com/eduke32@2942 1a8010ca-5511-0410-912e-c29ae57300e0
Using the players's cursectnum instead of "updating" the sectnum means that it
won't glitch on SoS. The z clamping (basically a port of some code from
G_DrawRooms) is so that the view won't be drawn from under the floor when shrunk.
git-svn-id: https://svn.eduke32.com/eduke32@2939 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes the screen keeping the bluish tint even after shattering a
frozen player in the splitscreen mod.
git-svn-id: https://svn.eduke32.com/eduke32@2938 1a8010ca-5511-0410-912e-c29ae57300e0
Using rotatesprite with bit 8 clear (scale to viewport) but using
fullscreen clipping bounds is never what we want. Also, tweak for
fake multi.
git-svn-id: https://svn.eduke32.com/eduke32@2932 1a8010ca-5511-0410-912e-c29ae57300e0
This uses the new rotatesprite bit introduced earlier. Also, allow the
HUD-less screen size.
git-svn-id: https://svn.eduke32.com/eduke32@2931 1a8010ca-5511-0410-912e-c29ae57300e0
I checked all direct and transitive uses of that function and am fairly
confident that it is never used.
git-svn-id: https://svn.eduke32.com/eduke32@2930 1a8010ca-5511-0410-912e-c29ae57300e0
ROTATESPRITE_MAX is moved to build.h and all orientation bits from CON commands
using rotatesprite are ANDed with (ROTATESPRITE_MAX-1). Some of the functions
use ROTATESPRITE_MAX for different internal purposes, which will not be exposed
to CON now (a good thing). Also, dorotspr_handle_bit2 is made clearer.
git-svn-id: https://svn.eduke32.com/eduke32@2929 1a8010ca-5511-0410-912e-c29ae57300e0
The black translucent background underneath the user map list will now
be drawn with a shade 32 tile 0 instead of tile BLANK, since I've seen
the latter being replaced in some mod. Also, it will look the same
regardless of screen aspect.
git-svn-id: https://svn.eduke32.com/eduke32@2928 1a8010ca-5511-0410-912e-c29ae57300e0
It seems like I broke the blitty/patchy way of drawing it with one of
the last commits.
git-svn-id: https://svn.eduke32.com/eduke32@2926 1a8010ca-5511-0410-912e-c29ae57300e0
This really fixes clearing the borders to the left and right with widescreen
and hud_bgstretch=0. Also, it seems to fix glitches when the "screen size"
is small (ud.screen_size is large).
git-svn-id: https://svn.eduke32.com/eduke32@2924 1a8010ca-5511-0410-912e-c29ae57300e0
Don't call setaspect from them, because the only thing that's needed is
(in classic) yxaspect and xyaspect. Pass these from the helper function
defined earlier instead.
git-svn-id: https://svn.eduke32.com/eduke32@2921 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes stuff like the HUD chaingun with widescreen and small "screen sizes"
(in-game viewport). It also makes rotatesprite behave more like classic overall.
I have no idea why it was there in the first place.
git-svn-id: https://svn.eduke32.com/eduke32@2918 1a8010ca-5511-0410-912e-c29ae57300e0
Classic HUD now has correct aspect in widescreen modes, so with the full status
bar, there may be patches of free room left to the left and right.
git-svn-id: https://svn.eduke32.com/eduke32@2914 1a8010ca-5511-0410-912e-c29ae57300e0
setaspect(), which is called by setaspect_new, already uses the *dimen variables,
so it's the same thing done twice. Now, a change from the original full status
bar to the original mini status bar keeps the horizontal FOV again and only
bumps the view a little higher, as with the classic aspect determination.
git-svn-id: https://svn.eduke32.com/eduke32@2913 1a8010ca-5511-0410-912e-c29ae57300e0
This means that classic and the GL modes now look the same as far as e.g.
hud_bgstretch or HUD weapons are concerned.
git-svn-id: https://svn.eduke32.com/eduke32@2911 1a8010ca-5511-0410-912e-c29ae57300e0
Instead of setting and resetting the [xy]dim globals, use them as locals
in a block (shadowing the globals). Also, do some common subexpression
elimination for clarity.
git-svn-id: https://svn.eduke32.com/eduke32@2908 1a8010ca-5511-0410-912e-c29ae57300e0
When shrunk, the player position is below the floor for some weird reason.
Updatesectorz would set the sector to -1, and the view would not be drawn.
git-svn-id: https://svn.eduke32.com/eduke32@2907 1a8010ca-5511-0410-912e-c29ae57300e0
Also, change type of g_numPlayerSprites (global and mapstate) from inconsistent
uint8_t/char to int8_t.
git-svn-id: https://svn.eduke32.com/eduke32@2897 1a8010ca-5511-0410-912e-c29ae57300e0
This makes sounds like DUKE_GET (item pickup) be heard for the second player
in the splitscreen mod, too.
git-svn-id: https://svn.eduke32.com/eduke32@2890 1a8010ca-5511-0410-912e-c29ae57300e0
This includes mirrors, rooms and masks. Any value other than 0 or 1
that is returned is considered an error (reserved for future use).
git-svn-id: https://svn.eduke32.com/eduke32@2889 1a8010ca-5511-0410-912e-c29ae57300e0
Of course, it still affects the whole screen. Handles pain and lizard spit.
git-svn-id: https://svn.eduke32.com/eduke32@2886 1a8010ca-5511-0410-912e-c29ae57300e0
The sound distance is the minimum of the two. Both point sources as well
as MUSICANDSFX ambient sound is handled.
git-svn-id: https://svn.eduke32.com/eduke32@2885 1a8010ca-5511-0410-912e-c29ae57300e0
The two instances in S_PlaySound3D() and S_Update() were slightly
different as far as sequencing is concerned. However, I think making
it the same has only benefits and may fix some popping sounds when
starting to play a sound and updating it with a different distance
value on the second buffer fill.
git-svn-id: https://svn.eduke32.com/eduke32@2884 1a8010ca-5511-0410-912e-c29ae57300e0
