Fixed occasional TreeView flickering in Edit Things window, Browse Action window and Tag Explorer panel.
Updated Thing category icons in the Edit Things window. They now have "opened" and "closed" states.
Internal: added BufferedTreeView to the core controls.
Updated ZDoom game configurations (sector crush mode).
Updated ZDoom ACC.
Added, Draw Line and Draw Curve modes: added "Auto-finish drawing" setting. When enabled, the modes will automatically finish drawing when currently drawn lines and already existing level geometry form a closed shape.
Changed: sector-wise linedef flipping is now done using the new "Align Linedefs" action. "Flip Linedefs" action works the same as in DB2 again.
Changed: when a map was already loaded, using "Open Map" action will use that map's directory as the starting directory.
Changed: official IWADs can no longer be saved.
Changed: disabled lump ranges/duplicate entries checks for official IWADs.
Changed: wad type is now preserved when saving a map (previously all wads were saved as PWADs).
Changed: moved Updater.exe launch much closer to the editor termination point to avoid any chance of it closing the editor before it properly closes itself.
Updated ZDoom_DECORATE.cfg (A_Blast).
Updated documentation.
Added, DECORATE parser: damage types are now parsed.
Added: the editor now reports duplicate textures/flats/patches/sprites/colormaps/voxels in the loaded wads.
Added, all text parsers: added #region/#endregion support.
Added TERRAIN parser.
Added, Script Editor: added special handling for DECORATE special comments.
Added, Sector Edit window, UDMF: Soundsequence value was setup incorrectly when showing the window for multiple sectors with mixed Soundsequence value.
Fixed, Map Options window: "Strictly load patches between P_START and P_END" was not applied when applying the changes.
Fixed, MAPINFO parser: MapInfo should be treated as defined when a map MAPINFO block corresponding to current map is encountered even if it doesn't define any properties recognized by the editor.
Fixed, all text parsers: in some cases error line was calculated incorrectly when reporting an error detected by a text parser.
Cosmetic: changed ' to " in the rest of Error and Warning messages.
Internal: added text resource tracking.
Updated ZDoom_DECORATE.cfg.
Updated documentation ("Game Configuration - Basic Settings" page).
Fixed, General interface, cosmetic: in some cases the warnings label was disabled in a flashing state (e.g. with red background).
Internal: moved some older GZDB actions form GZGeneral to MapManager. They can no longer be toggled when no map is loaded (which is probably for the best).
Updated ZDoom_ACS.cfg.
Updated ZDoom_DECORATE.cfg.
Updated skybox model to better match GZDoom's skybox. Also the sky texture was flipped horizontally.
Fixed, Visual mode: "Select with the same texture" action is now able to select sidedef parts only visible because of slopes.
Fixed, Visual mode: skybox texture was not updated after using "Open map in current wad" action.
Fixed, Visual mode: in some cases Visual camera was placed below sector's floor when "Sync camera position between 2D and 3D modes" setting was enabled.
Fixed: numeric thing flags with inverted UDMF flag defined in "thingflagstranslation" Game configuration block were lost when copy-pasting a thing.
Fixed, command line arguments: fixed a crash when loading a map from a wad with existing .dbs file.
Fixed, Map Analysis mode: fixed a crash when trying to dissolve an invalid sector when one of it's linedefs referenced it on the both sides.
Fixed, Sectors mode: fixed incorrect undo description when deleting sectors.
Internal: joined declaration and assignment of some more variables.
Fixed, ANIMDEFS parser: camera texture names are limited to 8 chars in ZDoom.
Fixed, Game configurations: Stalagtite:47 thing was named Stalagmite.
Changed, Game configurations: moved Stalagmite:5050 thing to the "Obstacles" category.
Added "Paste Properties Special" actions in "Classic" and "Visual" categories. They work the same way as "Paste Special" action.
Added: "Copy Properties", "Paste Properties" and "Paste Properties Special" options are now shown in the Edit menu if current classic mode supports them.
Changed, Paste Properties Special window: only options relevant to current map format are now displayed.
Changed, Paste Properties Special window, UDMF: all UI-managed options are now available.
Fixed: MAPINFO parser was unable to process "include" directives.
Fixed, General interface: selection info was reset to "Nothing selected" after few seconds regardless of current selection.
Fixed, Visual mode: thing bounding boxes were not updated when changing things positions using Randomize mode.
Fixed, Visual mode: event lines were displayed at incorrect height when entering Visual mode for the first time.
Fixed, Texture Browser window: when MixTexturesFlats Game Configuration option is disabled, textures/flats are no longer shown in the Used group when flats/textures with the same names are used in the map.
Fixed(?): probably fixed an exception some users reported when trying to initialize a Classic mode after switching from Visual mode with "Sync cameras" option enabled.
Changed, Game configurations, Thing Categories: a block must have at least one thing category property to be recognized as a thing category.
Changed, Visplane Explorer: the plugin now outputs more info when it fails to initialize vpo.dll.
Cosmetic, Thing Edit window, Doom/Hexen map format: adjusted UI layout so thing flags control no longer displays scrollbars in Hexen map format.
Internal: merged methods from UDMFTools into UniFields, removed UDMFTools.
Updated Inno Setup script (added VC++ 2008 SP1 distributive).
Updated ZDoom_DECORATE.cfg (A_CheckBlock).
Updated documentation (added "System Requirements" page).
Fixed, UDMF parser: parser failed to parse decimals stored using scientific notation (like "1E-06").
Fixed, UDMF parser: incorrect line numbers were shown when displaying errors.
Changed, UDMF parser: many error descriptions are now more detailed.
Updated ZDoom ACC to Git rev. ae5f036.
High-DPI: fixed many issues with incorrect controls size (Tag selector width, Comment Editor size, icons size, tabs size etc.).
Cosmetic: changed map geometry dragging undo messages to more descriptive ones.
Fixed, Textures Browser, cosmetic: "Show textures in subdirectories" checkbox should be repositioned when "Long texture names" one is invisible.
Updated ZDoom_DECORATE.cfg (added A_SetFloatSpeed + a couple of fixes).
Removed, Texture Browser: removed "Show image sizes" checkbox. "Show texture and flat sizes in browsers" preferences setting is now used instead.
Fixed, Things mode: event line between pre-last and the last PatrolPoint was not drawn.
Fixed, Things mode: highlight range for sizeless things (things with "fixedsize" game configuration property) was calculated incorrectly.
Fixed: fixed a crash when opening Script Editor after using "Open map in current wad" command to switch to UDMF map with SCRIPTS lump when current script configuration was not saved in the wad's .dbs file.
Fixed: map closing events were not triggered when using "Open map in current wad" command, which could potentially result in plugin crashes/incorrect behavior.
Fixed: Sector Drawing overrides panel could trigger an exception when closing the map during resource loading.
Internal: added "Debug + Profiler" solution configuration, added 2 profiling methods to DebugConsole.
Internal: rewrote MainForm.DisplayStatus() / StatusInfo to handle selection info in a more structured way.
Fixed, internal: some destructors could potentially be executed more than once potentially leading to exceptions. Other destructors were not called at all.
Updated ZDoom_DECORATE.cfg.
Visual mode, 3d floors: sloped 3d floors are now always rendered as opaque (just like in GZDoom).
Fixed a crash when creating a new unknown thing (introduced in r2324).
Documentation: updated "Action Argument Settings" and "DECORATE keys" pages.
Fixed, Game Configurations window: current map is marked as changed when applying changes done in the window.
Changed, UDMF saving: removed extra line break between map elements.
Nodes Viewer mode: added more boilerplate to classic nodes reader.
Thing Filters Form: program configuration was not marked as changed when saving thing filters.
Cosmetic layout fixes in Thing/Linedef/Sector Info panels.
Cosmetic text fixes in several Map Analysis results.
Internal: debug console is now cleared when creating a new map.
Updated ZDoom_DECORATE.cfg.
Visual mode: removed "Fit Texture's Width" and "Fit Texture's Height" actions.
Visual mode: "Auto-align texture offsets" actions were incorrectly aligning double-sided middle walls in some cases.
Visual mode: "Auto-align texture offsets" actions now align non-wrapped double-sided middle walls to vertical offset closest to their initial vertical offset.
Visual mode: middle parts of double-sided walls were ignored when Shift-selecting walls.
Nodebuilders/Game configurations: GL nodes definitions were missing from game configurations.
Nodebuilders/Game configurations: "~MAP" wildcard can now be a part of a lump name.
Nodebuilders: GL nodes were not properly handled by the editor.
Main Window: the window is now moved into the view when stored position is ouside of screen bounds.
Classic and Visual modes: changing thing pitch was ignored in some cases.
Visual mode: raising and lowering a thing with "+SPAWNCEILING" flag now works the same way as when raising/lowering a regular thing.
Visual mode: using "Raise/Lower Floor/Ceiling to adjacent sector" actions on a thing with "+SPAWNCEILING" flag now works the same way as when using them on a regular thing.
Rendering: even more fixes to MODELDEF and UDMF properties-related model rendering logic.
Internal, ResourceListEditor: rewritten resource validation check in a more OOP-ish way.
Configurations: fixed an infinite loop crash when a file was trying to include() itself.
UDMF thing flags: added Skill 6-8 to the flags list (because there are thing filters for these).
ZDoom_ACS.cfg: added definitions for SetTeleFog and SwapTeleFog.
ZDoom_DECORATE.cfg: added definitions for A_SetTeleFog and A_SwapTeleFog.
Updated ZDoom ACC.
Updated documentation.
Fixed, Texture Browser Form: well, I broke "Tab" key functionality again (in previous commit)...
Maintenance: changed curly braces style to match DB2 one (hopefully not breaking anything in the process...).
Maintenance: changed private method names casing to match DB2 one.
Texture browser form: added "Long texture names" check-box. It can be used to toggle between displaying long and short texture names.
Texture browser form: added "Show image size" check-box.
Texture browser form: image size is now shown differently.
Image Selector: added a button to toggle between long and short texture name.
Linedef info panel: long texture names are now displayed properly.
Sector info panel: long texture names are now displayed properly.
Fixed: "Save Screenshot" and "Save Edit Area Screenshot" actions were triggered multiple times when a child window was open.
Fixed: used textures should be always updated after using "Change map in current WAD" action.
Fixed, "Change map in current WAD": fixed a crash when trying to switch from a map with missing game configuration path.
Updated ZDoom_ACS.cfg.
Open Map in Current WAD: resources are now reloaded when current and target map's resources don't match.
Added some boilerplate to UniversalParser and PK3FileImage.
Internal: ImageSelectorControl now has "UsePreviews" property.
Internal: added ConfigurablePictureBox.
Updated ZDoom_DECORATE.cfg.
Visual mode: "Lower/Raise Floor/Ceiling" actions now work on surfaces with sector slopes.
Cosmetic: numeric textboxes, which support relative values, now have differently colored text and a tooltip.
Internal: renamed Sector.CeilingSlopeOffset to Sector.CeilSlopeOffset, Sector.CeilingSlope to Sector.CeilSlope to match their names with similar sector properties.
Textures Browser form: PK3/Directory TEXTURES images are now shown in a separate folder in the resources tree.
Fixed, Textures Browser form: fixed a logic error when trying to select initial flat when mix textures & flats was disabled in the current game configuration (this resulted in the blank textures list after opening the form).
Fixed, Textures Browser form: resources tree showed textures count even when browsing flats.
Fixed, Textures Browser form: PK3/Directory textures took precedence even when browsing flats (this means when there were a flat and a texture with the same name, a texture was displayed when browsing flats).
Fixed, Classic modes: actor's scale set in DECORATE was ignored when rendering models.
Fixed, MODELDEF parser: in some cases, several model definitions were skipped when trying to skip the current one.
Fixed, resource management: flat and sprite TEXTURES definitions were loaded only from TEXTURES files named "TEXTURES".
Fixed/added, PK3/folder resource management: patch locations for sprites defined in TEXTURES are now checked the same way as in ZDoom (previously only the "sprites" folder was checked).
Fixed/added, PK3/folder resource management: patch locations for textures defined in TEXTURES are now checked the same way as in ZDoom (previously only the "textures" folder was checked).
Fixed, PK3/folder resource management: flats defined in TEXTURES were not added to the global Flats image list.
Fixed, PK3/folder resource management: in some cases, the image search algorithm could find flats, textures, patches or sprites in incorrect folders (for example, it could find a flat in "flats_backup" folder).
Internal: UDMF sector slopes and offsets are no longer stored in sector.Fields. Use sector.FloorSlope, sector.FloorSlopeOffset, sector.CeilingSlope and sector.CeilingSlopeOffset.
Thing Edit Form, UDMF: added controls for setting pitch, roll, scale, render style, fill color, alpha, health and score.
Visual mode, UDMF: UDMF scale is now applied when rendering sprites.
Added Thing Statistics form (Edit -> View Thing Types...), which shows all loaded thing types with some additional info.
Visual mode: sprites with negative ScaleX and positive ScaleY were not rendered properly.
Classic modes: display was not updated after loading a sprite.
Current testing engine change was not saved on closing the program when no other game configuration settings were changed.
Error Checker mode: added "Check missing flats" check.
Error Checker mode: fixed several descriptions.
Sprite patches for sprites defined in TEXTURES are now loaded from Sprites namespace.
Some of my older texture alignment code didn't work properly when strict texture/flat handling ("mixtextureflats" game configuration flag set to false) was enabled.
Fixed some incorrect checks for missing texture ("-").
Draw Curve Mode: added settings panel.
Sectors mode: added "Make Door" button to the toolbar.
Swapped Side panel and Info panel z-order.
Interface: split toolbar into 3 separate toolbars. All toolbar buttons are now viewable at 1024x768.
Interface: grouped stuff in "Modes" menu a bit better.
Interface: added "Draw [stuff]" buttons to modes toolbar.
Interface: reorganized main menu. Hope it makes more sense now.
API: added General.Interface.AddModesButton() and General.Interface.AddModesMenu(), which can be used to add buttons to specific group in "Modes" toolbar and menu items to specific group in "Modes" menu, so actions, which behave like an editing mode, but are not part of one can be added there.
Configurations: all 64 game configuration are now available by default.
Game Configurations window: game configurations can now be disabled. This setting is mostly cosmetic. When a game configuration is disabled, it won't be shown in "game configuration" dropdowns in New\Open Map Options and Map Options windows. If a map's .dbs file specifies a disabled configuration, it will be picked as a map configuration anyway.
Linedefs mode: vertex insert preview logic used Highlight range instead of Stitch range (which is used when draw mode engages).
Visual mode: double-sided middle textures were not selected when using "Select" action with "with same texture" modifier.
Textures: some optimizations in patch blending code.
ZDoom ACS script configuration: added definitions for StrLeft, StrMid and StrRight functions.
UDMF map parser should work ~35% faster now.
Texture browser form: keyboard focus was not updated when switching between textures using Tab key.
"Graphics" folder is now checked when searching for texture patches.
Various cosmetic changes here and there.
Info panel was not updated after leaving Visual mode.
Moved hints logic to ClassicMode, so hints can be displayed by any plugin.
Visual mode: dynamic light animation was not working.
Minor performance improvements in Actor, Configuration, UDMF and TEXTURES parsers.
Sector and Thing Info panels: fixed possible crash when trying to show unknown thing/sector flag.
Hints were not shown properly when multiselection was started while highlighting a map element.
Copy/Paste actions work much faster now.
Classic modes: rendered grid size in now adjusted to current zoom level.
Increased performance when canceling Edit mode after pasting.
"Export to Wavefront .obj" function: current selection is now converted to sectors before running the function (previously it would export selected sectors when there were sectors selected, or the whole map when no sectors were selected).
Increased maximum zoom level in Classic modes to 3000%.
Added "1 mp" option in grid size menu.
Added "400%" option in zoom menu.
Renamed "Toggle GZDoom rendering effects" action to "Toggle Geometry Effects".
Sync camera position: Visual Camera height is now changed only if camera is above or below current sector.
Classic modes: view was not redrawn after "Test map from current position" action.
"Test map from current position" action: incorrect player start was used when a map had several Player 1 Start things.
Script editor: pressing "F1" now opens keyword help instead of program manual.
Linedef edit form, Thing edit form: rewritten script support logic. It should now work in the same manner as the rest of controls.
Thing info panel: thing arguments now have proper labels.
Edit forms, UDMF: fields, which are handled by UI, are no longer shown in "Custom" tab.
Visual mode: fixed a crash when loading a model on a video card without Shader model 2.0 support.
Fixed incorrect argument number and changed most of labels in "Cameras and interpolation" section of zdoom_things.cfg.
Visual mode: rendering was broken on video cards without Shader Model 2.0 support.
Engines list was not updated after changing engine in Test button's drop down.
Texture scale controls now have "Link" button.
Thing, Sector (UDMF) and Linedef edit forms now work in realtime mode.
Some more fixes in Edit form realtime update stuff.
Removed some unused variables and functions.
Tag Statistics form: you can now double click on Sectors, Linedefs or Things cell to select them, and right click to open their properties.
Texture size labels were displayed incorrectly in some cases.
Rewritten VerticesMode.DeleteItem() once again...
Vertex Edit form now works in realtime mode.
Vertex Edit form: ceiling and floor vertex offsets can now be cleared.
Added StairSectorBuilder plugin (I suppose some external plugins will stop working in GZDB because I've changed ButtonStep to float in ButtonsNumericTextbox a couple revisions ago...).
Preferences form: action description is now scrollable.
Changed background color of Sector Edit form.
Vertex' ZCeiling and ZFloor properties are now managed internally.
Event lines for "event activators" (ActorMover, Camera and things with Thing_SetGoal special) are now drawn with different color.
Fixed a crash when a Thing with arguments is pasted in Visual modes.
Several other small fixes.
Fixed config error in ZDoom_things.cfg.
Fixed config error in ZDoom_ACS.cfg
Things can now be rotated in visual mode.
Added JPG and TGA image format support.
Fixed: TEXTURES files with names other than "textures.ext" will now be loaded (as an example, files named like "textures.something.txt" or "textures_walls.ccp" will be loaded by (G)ZDoom, but not by Doom Builder 2 or previous versions of GZDB).
Fixed: textures defined in TEXTURES have higher priority in (G)ZDoom than images with the same name in "textures" folder.
Fixed another possible crash when MODELDEF is reloaded.
Replaced all doubles with floats.
Script Editor:
Navigator drop-down now updates automatically.
Navigator drop-down now also works for external files.
Added Navigator drop-down support for Decorate and Modeldef.
MODELDEFs and models can now be loaded from PK3 resources (does anybody know if models or MODELDEFs can be stored in WADs?).
Negative scale and zOffset are now correctly parsed from MODELDEFs (model surfaces may be inverted though).
Fixed a crash while reading MODELDEFs when Operation System's decimal separator was set to comma.
Fixed a crash when user changed Thing type in Visual mode to a new one with model override, which wasn't previously used in a map.
Fixed a bug introduced in 1.06 when models weren't rendered in Visual mode when Fullbright mode was on.
Non-breaking space is now correctly handled by all Doom Builder's data parsers.
ColorPicker plugin:
Fixed a crash when user attempted to open ColorPicker window to edit sector properties in Visual mode, using hilighted surface as selection source, without selecting anything before doing so.
- UDMF TEXTMAP now contains the indices of elements as comment next to the structure header.
- Thing cages in Visual Mode now also get the selection and highlight color so that a selection and highlight on things without sprite can also be seen.
