BSP textures are now two-layered with the albedo and emission in the two
layers rather than two separate images. While this does increase memory
usage for the textures themselves (most do not have fullbright pixels),
it cuts down on image and image view handles (and shader resources).
For now, the functions check for a null hunk pointer and use the global
hunk (initialized via Memory_Init) if necessary. However, Hunk_Init is
available (and used by Memory_Init) to create a hunk from any arbitrary
memory block. So long as that block is 64-byte aligned, allocations
within the hunk will remain 64-byte aligned.
Mod_DecompressVis_set (via Mod_LeafPVS_set) can be used to recycle pvs
sets, but the set may have been set to everything at some stage, which
is implemented by inverting the set (making the set infinite) and having
1-bits remove elements from the set. This is most definitely not wanted
for pvs :)
Currently undecided what to do about Mod_DecompressVis_mix, thus the
fixme.
Fixes the flickering lights in any map where the camera is out of the
map for a single frame (eg, start.bsp, The Catacombs (hipnotic, hip2m3)).
The fact that numleafs did not include leaf 0 actually caused in many
places due to never being sure whether to add 1. Hopefully this fixes
some of the confusion. (and that comment in sv_init didn't last long :P)
Modern maps can have many more leafs (eg, ad_tears has 98983 leafs).
Using set_t makes dynamic leaf counts easy to support and the code much
easier to read (though set_is_member and the iterators are a little
slower). The main thing to watch out for is the novis set and the set
returned by Mod_LeafPVS never shrink, and may have excess elements (ie,
indicate that nonexistent leafs are visible).
Mostly, this gets the stage flags in with the barrier, but also adds a
couple more barrier templates. It should make for slightly less verbose
code, and one less opportunity for error (mismatched barrier/stages).
This gets the shaders needed for creating shadow maps, and the changes
to the lighting pipeline for binding the shadow maps, but no generation
or reading is done yet. It feels like parts of various systems are
getting a little big for their britches and I need to do an audit of
various things.
This fixes the textures (and presumably mesh data) being deleted while
still in use. Oddly, the wait was needed in both brush and alias models
(I expected brush to always come first).
This is for the conversion /to/ paletted textures. The conversion is
necessary for csqc support. In the process, the conversion has been sped up
by implementing a color cache for the conversion process. I haven't
measured the difference yet, but Mr Fixit does seem to load much faster for
the sw renderer than it did before the change (many months old memory).
Still "some" more to go: a pile to do with transforms and temporary
entities, and a nasty one with host_cbuf. There's also all the static
block-alloc lists :/
Double benefit, actually: faster when building a fat PVS (don't need to
copy as much) and can be used in multiple threads. Also, default visiblity
can be set, and the buffer size has its own macro.
The node struct was 72 bytes thus two cache line. Moving the pointer
into the brush model data block allows nodes to fit in a single cache
line (not that they're aligned yet, but that's next). It doesn't seem to
have made any difference to performance (at least in the vulkan
renderer), but it hasn't hurt, either, as the only place that needed the
parent pointer was R_MarkLeaves.
It's not quite as expected, but that may be due to one of msaa, the 0-15
range in the palette not being all the way to white, the color gradients
being not quite linear (haven't checked yet) or some combination of the
above. However, it's that what should be yellow is more green. At least
the zombies are no longer white and the ogres don't look like they're
wearing skeleton suits.
Doesn't seem to make much difference performance-wise, but speed does
seem to be fill-rate limited due to the 8x msaa. Still, it does mean
fewer bindings to worry about.
This is a big step towards a cleaner api. The struct reference in
model_t really should be a pointer, but bsp submodel(?) loading messed
that up, though that's just a matter of taking more care in the loading
code. It seems sensible to make that a separate step.
Probably not really necessary, but I think I found a small opportunity
for a buffer overflow in there while I was modifying the code, so this
is probably better anyway.
It now takes a context pointer (opaque data) that holds the buffers it
uses for the temporary strings. If the context pointer is null, a static
context is used (making those uses of va NOT thread-safe). Most calls to
va use the static context, but all such calls have been formatted
consistently so they are easy to find when it comes time to do a full
audit.
I had messed up my index array creation, but once that was fixed the
textures worked well other than a lot of pixels are shades of grey due
to being in the top or bottom color map range.
The dynamic array macros made this much easier than last time I looked
at it, especially when it came to figuring out the bad memory accesses
that I seem to remember from my last attempt 9 years ago.
This makes tex_t more generally useable and probably more portable. The
goal was to be able to use tex_t with data that is in a separate chunk
of memory.
The sky texture is loaded with black's alpha set to 0. While this does
hit both layers, the screen is cleared to black so it shouldn't be a
problem (and will allow having a skybox behind the sheets).
It now uses the ring buffer code I wrote for qwaq (and forgot about,
oops) to handle the packets themselves, and the logic for allocating and
freeing space from the buffer is a bit simpler and seems to be more
reliable. The automated test is a bit of a joke now, though, but coming
up with good tests for it... However, nq now cycles through the demos
without obvious issue under the same conditions that caused the light
map update code to segfault.
Copying data from the wrong buffer was the cause of the corrupted brush
model vertices, and then lots of little errors (mostly forgetting to
multiply by bpp) for textures.
This fixes a nine year old bug that I discovered only today thanks to
the vulkan renderer. The problem was that when a model had a clear
callback, it was not getting marked as needing to be reloaded, and thus
the model would be "reused" after being trampled on by another model
loading over it.
Also, plug a potential string buffer overflow (strcpy just will not
die!).
This cleans up texture_t and possibly even improves locality of
reference when running through texture chains (not profiled, and not
actually the goal).
There's still some cleanup to do, but everything seems to be working
nicely: `make -j` works, `make distcheck` passes. There is probably
plenty of bitrot in the package directories (RPM, debian), though.
The vc project files have been removed since those versions are way out
of date and quakeforge is pretty much dependent on gcc now anyway.
Most of the old Makefile.am files are now Makemodule.am. This should
allow for new Makefile.am files that allow local building (to be added
on an as-needed bases). The current remaining Makefile.am files are for
standalone sub-projects.a
The installable bins are currently built in the top-level build
directory. This may change if the clutter gets to be too much.
While this does make a noticeable difference in build times, the main
reason for the switch was to take care of the growing dependency issues:
now it's possible to build tools for code generation (eg, using qfcc and
ruamoko programs for code-gen).
They take a pointer to a free-list used for hashlinks so the hashlink
pools can be per-thread. However, hash tables that are not updated are
always thread-safe, so this affects only updates. progs_t has been set
up such that it is easy for multiple progs within one thread can share
hashlinks.
After messing with SIMD stuff for a little, I think I now understand why
the industry went with xyzw instead of the mathematical wxyz. Anyway, this
will make for less pain in the future (assuming I got everything).
These are the ones where I could easily make scan-build happy. They do seem
to be potential holes where invalid data in one place could result in use
of uninitialized values.
While scan-build wasn't what I was looking for, it has proven useful
anyway: many of the sizeof errors were just noise, but a few were actual
bugs (allocating too much or too little memory).
This was caused by an out-by one error when setting up the skin: if cmap
was 0 then the gl_skin struct would be taken from index -1 of the array and
thus cause all sorts of grief.
GL sometimes crashes when building skins. This probably isn't the correct
fix (finding the situation where fb->tex can become NULL despite fb being
non-null is), but it does kill the segfault. Luckily, this is git and this
commit can just be reverted when the real fix shows up. :)
The search for these files will stop in the vpath that contains the .bsp
file to which they belong. This will prevent problems with
id1/maps/start.lit being used for shadows/maps/start.bsp.
Since the hull depth needs to be set for the hull to be useful, it makes
sense to move the code into the same place that allocates new hulls (to me,
anyway).
The depth limits in the gl and glsl renderers and in the trace code really
bothered me, but then the fix hit me: at load-time, recurse the trees
normally and record the depth in the appropriate place. The node stacks can
then be allocated as necessary (I chose to add a paranoia buffer of 2, but
I expect the maximum depth will rarely be used).
This fixes the horribly different results between optimized and unoptimized
qfbsp (there is still a difference of 1 brushface). Unfortunately, it also
severely limits the maximum size of a map.
All of the nastiness is hidden in bspfile.c (including the old bsp29
specific data types). However, the conversions between bsp29 and bsp2 are
implemented but not yet hooked up properly. This commit just gets the data
structures in place and the obvious changes necessary to the rest of the
engine to get it to compile, plus a few obvious "make it work" changes.
In the end, it turns out this is the correct fix for the gl seg on
overkill, because build_skin will correctly use the fully setup player skin
if the glskin doesn't have a texture associated with it.
