Variables at global scope which share a name tend to actually be the same variable. Not good when you pass such a variable to function that immediately returns if the passed parameter (the variable) equals said variable (itself).
git-svn-id: https://svn.eduke32.com/eduke32@4090 1a8010ca-5511-0410-912e-c29ae57300e0
Don't touch TerminX's r_usetileshades==1 or it being the default.
git-svn-id: https://svn.eduke32.com/eduke32@4010 1a8010ca-5511-0410-912e-c29ae57300e0
- Use the proper tile sequence when multiple pskies are present in a map.
However, there's still only *one* psky chosen at map load time.
- Handle three horizfrac cases:
* 0, psky always at same level wrt screen
* 65536, psky horiz follows camera horiz (e.g. E4L9)
* otherwise, fall back to default hard-coded parallax implemented as an
angle fraction
git-svn-id: https://svn.eduke32.com/eduke32@3977 1a8010ca-5511-0410-912e-c29ae57300e0
- Rename sky_t members: yscale -> horizfrac, bits -> lognumtiles.
- Add default sky (8 tiles, horizfrac=32768 (i.e. 1/2 the scene horiz), offsets
all zero) and CLOUDYOCEAN sky (8 tiles, horizfrac=65536, offsets all zero)
to multipsky[].
- Get rid of "psky_t g_psky", merely maintaining a g_pskyidx instead. Set it up
at map load time so as to keep the behavior of the legacy per-map psky:
the last sector index with a matching psky ceiling wins.
- In mapstate_t, save g_pskyidx too, not (former) pskybits and pskyoffs[].
- Make on-map-load global psky setup consistent for the game and editor by
factoring it out into common.c: G_SetupGlobalPsky().
- Remove a couple of useless initializations, add some static assertions.
This commit is more likely to introduce subtle differences in behavior.
Specifically, getpsky() now always returns the default sky properties instead of
the global sky ones (but with all-zero offsets) when no match for a suiting
multi-psky is found. This is only likely to affect the yscale/horizfrac of
non-multi-pskies when a global non-default multi-psky has been set up.
Bump BYTEVERSION again.
git-svn-id: https://svn.eduke32.com/eduke32@3976 1a8010ca-5511-0410-912e-c29ae57300e0
- Consolidate psky* arrays into a "typedef struct psky_t" "g_psky" and
"multipsky[]".
- Factor out getting parallaxed sky properties into getpsky().
- Condense initial multi-psky setup by memcpy'ing from multipsky[].
- New function: MultiPsky_TileToIdx().
- Add new define PSKYOFF_MAX and related consistency-checking assertions.
- Lower MAXPSKYTILES to 8 to reflect current usage (was 256).
- Game: make multi-pskies consider dynamically-remapped MOONSKY1, BIGORBIT1
and LA. (Not very useful as the editor will still only act for the static
values -- 80, 84 and 89, respectively.)
An attempt has been made to preserve behavior even in strange cases, so this
commit is unlikely to introduce regressions. Because of point 6, BYTEVERSION
had to be bumped.
git-svn-id: https://svn.eduke32.com/eduke32@3975 1a8010ca-5511-0410-912e-c29ae57300e0
So there's no "jump" from vis!=0 to vis=0 making the texture appear brighter.
git-svn-id: https://svn.eduke32.com/eduke32@3959 1a8010ca-5511-0410-912e-c29ae57300e0
That is, for shade of objects, use shade tables. For visibility, use GL fog.
Mixing these two does not produce satisfactory results in areas where both
shade and visibility darkening are high, such as around the E1L1 restroom.
git-svn-id: https://svn.eduke32.com/eduke32@3941 1a8010ca-5511-0410-912e-c29ae57300e0
Analogously for the negation; remove a couple of redundant decls of "qsetmode".
git-svn-id: https://svn.eduke32.com/eduke32@3823 1a8010ca-5511-0410-912e-c29ae57300e0
The visibility calculation relies on the distance, which might not be entirely
accurate in rotatesprite, so maybe it'll be too dark in some cases.
git-svn-id: https://svn.eduke32.com/eduke32@3741 1a8010ca-5511-0410-912e-c29ae57300e0
TODO: figure out wtf is wrong with rotatesprite, linear filtering.
git-svn-id: https://svn.eduke32.com/eduke32@3737 1a8010ca-5511-0410-912e-c29ae57300e0
- Return early from drawsprite_classic() if tspr->owner if oob.
Commonize that check between renderers into bad_tspr().
- Make the BIT() macro a left-shift of the *unsigned* number 1,
preventing expansion to (1<<31).
git-svn-id: https://svn.eduke32.com/eduke32@3717 1a8010ca-5511-0410-912e-c29ae57300e0
Specifically, in GL modes, and if the CHAINGUN is not replaced by a model,
- draw the upper part twice: first, two screen pixels * weapon scale lower,
then at the original position
- reverse the previous order: draw the upper part first, then the lower part
This is much preferable to the previous engine-side hack, and to my eye,
it looks perfect now.
git-svn-id: https://svn.eduke32.com/eduke32@3695 1a8010ca-5511-0410-912e-c29ae57300e0
- Don't attempt to play an ANM file if it is empty (warn) or too short (error).
- If failing to read IVF file header or initializing VPX codec, don't play ANM.
- Return early from gltexapplyprops() if not in GL modes.
git-svn-id: https://svn.eduke32.com/eduke32@3628 1a8010ca-5511-0410-912e-c29ae57300e0
This enables ART animations to take effect on voxels in classic, voxels and models in Polymost, and models in Polymer.
git-svn-id: https://svn.eduke32.com/eduke32@3580 1a8010ca-5511-0410-912e-c29ae57300e0
One use was in determining the ray vector for the mouse-aiming hitscan
in the editor. Unfortunately, the change doesn't make it any less broken
in Polymost, even if the two instances were out of sync.
git-svn-id: https://svn.eduke32.com/eduke32@3401 1a8010ca-5511-0410-912e-c29ae57300e0
Also, rewrite comparison to the non-tint in astub.c to be even less hackish.
git-svn-id: https://svn.eduke32.com/eduke32@3387 1a8010ca-5511-0410-912e-c29ae57300e0
- Stop using memcache on some other failure paths, particularly when
failing to read from the on-disk texcache.
- Factor out cache reading code (3x).
- Fix endianness issues affecting big-enadian systems (one introduced by
r3382, one existing before). Comment each B_LITTLE32 with whether we're
converting from native to on-disk (little) endianness or back.
git-svn-id: https://svn.eduke32.com/eduke32@3386 1a8010ca-5511-0410-912e-c29ae57300e0
- If aiming at a swapped bottom wall, display "Wall <wallnum> -> <otherwallnum>"
- highlight pic, shade, pal, cstat in yellow then
- in printext256, accept at most 3 digits for the color format string (e.g. ^123)
git-svn-id: https://svn.eduke32.com/eduke32@3308 1a8010ca-5511-0410-912e-c29ae57300e0
Implemented using GL_LINEAR fog. The only source of difference (besides the
obvious indexed vs. true color) should now be the distance constant, which
still had to be determined experimentally. Polymer implements this mode in
its fog fragment program part.
Parallaxed skies are always drawn with full visibility, I'm not sure if there
are any maps that expect otherwise.
Also, accidentally committed: factor out initialization code from
polymost_printext256() into gen_font_glyph_tex(), small game.c changes.
git-svn-id: https://svn.eduke32.com/eduke32@3301 1a8010ca-5511-0410-912e-c29ae57300e0
This also means that the "r_shadescale_unbounded 0" option will work
in Polymer (except on models).
git-svn-id: https://svn.eduke32.com/eduke32@3286 1a8010ca-5511-0410-912e-c29ae57300e0
The size of that struct is currently 4, and its layout almost the same as
what is read in with loadpics(). The number of tiles in an animation is
bumped to 256, so that the max. tile difference in DEF's animtilerange is
255. (There's no way to have such animations from ART.)
git-svn-id: https://svn.eduke32.com/eduke32@3202 1a8010ca-5511-0410-912e-c29ae57300e0
NOTE: changes such as these are best viewed with something like
git diff (...) --color-words='[a-zA-Z0-9_]+|[^[:space:]]'
git-svn-id: https://svn.eduke32.com/eduke32@3176 1a8010ca-5511-0410-912e-c29ae57300e0
This reverts r3159..r3161.
Conflicts:
eduke32/build/include/compat.h
(Handled so that r3163's changes are kept applied.)
git-svn-id: https://svn.eduke32.com/eduke32@3165 1a8010ca-5511-0410-912e-c29ae57300e0
I think there's also a fix for the CON precache system breakage in here (lost it in my local tree when I started getting the C++ build working in MSVC, sorry!)
git-svn-id: https://svn.eduke32.com/eduke32@3159 1a8010ca-5511-0410-912e-c29ae57300e0
We do this by messing with the GL texture that gets uploaded for CHAINGUN.
Since this is implemented on the engine side, the static value for CHAINGUN
(2536) is used, and the tile dimensions are compared to 211x55 to have a
little confidence that the tile wasn't overridden by a mod. Hack indeed.
git-svn-id: https://svn.eduke32.com/eduke32@3111 1a8010ca-5511-0410-912e-c29ae57300e0
The black translucent background underneath the user map list will now
be drawn with a shade 32 tile 0 instead of tile BLANK, since I've seen
the latter being replaced in some mod. Also, it will look the same
regardless of screen aspect.
git-svn-id: https://svn.eduke32.com/eduke32@2928 1a8010ca-5511-0410-912e-c29ae57300e0
Don't call setaspect from them, because the only thing that's needed is
(in classic) yxaspect and xyaspect. Pass these from the helper function
defined earlier instead.
git-svn-id: https://svn.eduke32.com/eduke32@2921 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes stuff like the HUD chaingun with widescreen and small "screen sizes"
(in-game viewport). It also makes rotatesprite behave more like classic overall.
I have no idea why it was there in the first place.
git-svn-id: https://svn.eduke32.com/eduke32@2918 1a8010ca-5511-0410-912e-c29ae57300e0
This means that classic and the GL modes now look the same as far as e.g.
hud_bgstretch or HUD weapons are concerned.
git-svn-id: https://svn.eduke32.com/eduke32@2911 1a8010ca-5511-0410-912e-c29ae57300e0
Instead of setting and resetting the [xy]dim globals, use them as locals
in a block (shadowing the globals). Also, do some common subexpression
elimination for clarity.
git-svn-id: https://svn.eduke32.com/eduke32@2908 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the code rather more readable in some places. Unlike the two
preceding commits, this one is actually purely textual replacement.
git-svn-id: https://svn.eduke32.com/eduke32@2877 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the corrections conditional on where they appear in (under-, over-,
white or mask wall).
git-svn-id: https://svn.eduke32.com/eduke32@2821 1a8010ca-5511-0410-912e-c29ae57300e0
This would only hit when polymost_printext256 erred out (mem alloc failure,
glGenTextures failure), i.e. "almost never".
Also, tweak a bound check in polymost_printext256.
git-svn-id: https://svn.eduke32.com/eduke32@2817 1a8010ca-5511-0410-912e-c29ae57300e0
Among other things, comment out very seldomly (or not at all)
used sprite member macros: SV, ZV, RX, RY, CX, CY, CD, PL.
git-svn-id: https://svn.eduke32.com/eduke32@2639 1a8010ca-5511-0410-912e-c29ae57300e0
- Help window text cleaned and made more consistent between game and editor
- Added help entry for "-clipmap"
- Log text for using CON, DEF, and RTS files has been made consistent
- All instances of '%s' have been replaced with \"%s\" because ' is a valid filename character. (At least on Windows.)
git-svn-id: https://svn.eduke32.com/eduke32@2538 1a8010ca-5511-0410-912e-c29ae57300e0
When drawing from inside the mirror, there may be no 'bunches' (BUILD lingo,
not TROR ones) collected, but following code used the first one unconditionally.
git-svn-id: https://svn.eduke32.com/eduke32@2427 1a8010ca-5511-0410-912e-c29ae57300e0
