Added full-panning stereo, improvement of channel management, and many other things.
Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes.
To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback.
ADLMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Fixed correctness of CMF files playing
* Fixed unnecessary overuse of chip channels by blank notes
* Added API to disable specific MIDI tracks or play one of MIDI tracks solo
* Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits.
* Added working implementation of TMB's velocity offset
* Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!)
* Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip
OPNMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels
* Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis
* Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip
* Added support for full-panning stereo option
ADL&OPN Hotfix: re-calculated default banks
The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
- new ccmd: vid_setscale <x> <y> [linear] [fake-mcga-4:3] - sets vid_scalemode to 5 with the absolute scaling parameters. example: vid_scalemode 800 600 allows you to see the screen (stretched) as if it were 800x600. Linear specifies whether to force the scaling to be linear in this mode, and "fake-mcga-4:3" is meant for 320x200-like modes that mimic mode13h scaling.
Added ability to switch emulator and it's accuracy level ("enabling of 'run at PCM rate' reduces accuracy, and also reduces CPU usage")
Added draft code for future external banks support (WOPL format for ADLMIDI and WOPN format for OPNMIDI)
ADLMIDI 1.3.3 2018-06-19
* Fixed an inability to load another custom bank without of library re-initialization
* Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Fixed incorrect 4-op counter which is still catch 4-op instruments on 2-op banks
* Fixed an incorrect processing of auto-flags
* Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event
* Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME!
* Updated DosBox OPL3 emulator up to r4111 of official DosBox trunk (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* The automatical choosing of 4 operator channels count has been improved (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
ADLMIDI 1.3.2 2018-04-24
* Added ability to disable MUS and XMI converters
* Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins.
* Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank).
* Added support for real-time switching the emulator
* Added support for CC-120 - "All sound off" on the MIDI channel
* Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept.
* Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
OPNMIDI 1.3.0 2018-06-19
* Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event
* Fixed an incorrect processing of auto-flags
* MAME YM2612 now results a more accurate sound as internal using of native sample rate makes more correct sound generation
* Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME!
* Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
OPNMIDI 1.2.0 2018-04-24
* Added ability to disable MUS and XMI converters
* Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins.
* Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank).
* Added support for real-time switching the emulator
* Added support for MAME YM2612 Emulator
* Added support for CC-120 - "All sound off" on the MIDI channel
* Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept.
* Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
Like Linux and macOS this will only support borderless fullscreen in the active desktop resolution now, which is what modern systems need.
The list of discrete resolutions has been removed as it makes no sense anymore with a fixed video mode - all the other scaling options remain active, though.
- with renderers freely switchable, some shortcuts in the 3D floor code had to be removed, because now the hardware renderer can get FF_THISINSIDE-flagged 3D floors.
- changed handling of attenuated lights in the legacy renderer to be adjusted when being rendered instead of when being spawned. For the software renderer the light needs to retain its original values.
Notes:
* ADL: The DMX volume model was set as default to unify volumes on all bank. Otherwise, if you will use 'Generic' or 'Win9x', the sound will became too loud than wanted. Each bank has own default volume model which is used when 'Auto' is set.
* ADL: 6 chips is optimal to work with default banks
* OPN: 8 chips are set to provide 48 polyphony channels. (each OPN2 chip has 6 channels only)
* Text files: junk spaces from end of lines are was auto-removed.
There is now a separate MIDI player options menu which is a list of submenus, one for each player (except for OPNMIDI which does not have any options yet.
The text input field for the configs have been removed. Instead it will now present a list of soundfonts that are found in specific locations.
For that it will look in the 'soundfont' directories of the FileSearch.Directories entry of the config.
Acceptable file formats here are SF2 and zipped GUS patch sets. These zipped patch sets need to have a timidity.cfg at the root and refer to all containing data by relative path. References to outside files are not allowed here.
It is still possible to refer to sound fonts elsewhere on the hard drive by manually entering a path at the console - but these won't show in the menu and will get lost if one cycles through the list of available options.
Of the available softsynths, FluidSynth will only list SF", Wildmidi will only list GUS patch sets and Timidity++ and GUS will list both.
Please note that although the GUS synth can read SF2, the output appears to be broken die to some old bug.
* Improved French translation, also covers previously missing strings.
* Adds a string for Borderless Windowed.
* Adds option to enable or disable borderless windowed for Windows only.
These commits had to be manually recreated because somehow the files appaarently ended up with CRLF in the repo which can cause problems with Windows Git and line ending normalization on.
- reordered vid_scalemode modes to be a little neater, having static modes and scalar modes separate, with a buffer in between so new modes can be added in the future without disrupting the current order.
Sadly, some mods are truly careless enough to modify the engine internal menus to add their own things, which should have no business whatsoever in there.
As an example, in a D4D version released in May, the Display Options menu is showing quite a bit of outdated content and missing important settings.
It now works the following way:
(0) - Force off (ZDoom defaults)
(1) - Force on (Doom defaults)
(2) - Auto off (Prefer ZDoom defaults - if DEHACKED is detected with no ZSCRIPT it will turn on) (default)
(3) - Auto on (Prefer Doom defaults - if DECORATE is detected with no ZSCRIPT it will turn off)
It now works the following way:
(0) - Force off (ZDoom defaults)
(1) - Force on (Doom defaults)
(2) - Auto off (Prefer ZDoom defaults - if DEHACKED is detected with no ZSCRIPT it will turn on) (default)
(3) - Auto on (Prefer Doom defaults - if DECORATE is detected with no ZSCRIPT it will turn off)
This fixes the following warnings on startup without configuration file:
Script error, "gzdoom.pk3:menudef.txt" line 1727:
Unknown CVar mod_dumb
Script error, "gzdoom.pk3:menudef.txt" line 1728:
Unknown CVar mod_dumb
Script error, "gzdoom.pk3:menudef.txt" line 1729:
Unknown CVar mod_dumb
Script error, "gzdoom.pk3:menudef.txt" line 1731:
Unknown CVar mod_dumb
- all 5 settings affected by uiscale have been changed to have the exact same semantics: -1, if supported means special scaling, this is available for HUD and status bar, 0 means to use uiscale, any larger value is a direct scaling factor.
- scaling is cut off when the factor is larger than screenwidth/320 or screenheight/200 because anything larger will definitely not fit.
- a lot of code has been cleaned up and consolidated. Especially the message code had an incredible amount of redundancy.
- all scaling options have been moved into a submenu. This menu is not complete, though - it still requires a special menu widget to convey the intended information without confusing the user.
- better handling of ForceScale for the fullscreen HUD that doesn't mess around with CVARs.
- moved the mug shot into the status bar, because this is global state that needs to be shared between different pieces of code which want to display a mug shot.
- SBARINFO should work off the current status bar settings instead of the ones stored in its script object
- made bluramount also into a gameinfo option
- negative gl_menu_blur cvar now uses gameinfo option, 0 disables it
- removed gl_menu_blur_enabled since gl_menu_blur==0 does that anyway
- made gl_menu_blur default to -1 to use gameinfo option
- add default gameinfo bluramount options
The values were still 8 and 32 respectively which applied to hardware from last decade, but for modern mods these are simply too low. New values are 64 as minimum and 128 as default.
- added script access to a sector's colormap and specialcolors fields. (Writing only through dedicated functions because these fields are render state which may need to trigger some form of refresh if the renderer changes.)
* dynamic lights also work in the true color software renderer and have been moved out of the OpenGL menu.
* created a separate software renderer menu and moved all relevant options there.
* delete non-applicable options when running in legacy mode.
* moved the OpenGL preferences menu one level up to eliminate a two-entry GL top level menu.
This reverts commit dd03bb1fcb.
Turns out that making this work in GL will create a complete mess so better remove the option as it would only cause problems.
