run into the adjacent columns.
- Added a NullSoundRenderer so that most of the checks against a NULL GSnd
can be removed.
- Fixed: Looping sounds must always successfully allocate a channel, even if
it's only a pre-evicted channel.
SVN r1058 (trunk)
code to process their messages. This was necessary to handle the %zu format
option used in some memory allocation failure messages.
- Fixed: The flat texture scaling action specials were completely broken.
SVN r1056 (trunk)
the rest of the game is concerned, these sounds will never stop once they
have been started until they are explicitly stopped. If they are evicted
from their channels, the sound code will restart them as soon as possible.
This means that instead of this:
if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1))
{
S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM);
}
The following is now just as effective:
S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM);
There are also a couple of other ramifications presented by this change:
* The full state of the sound system (sans music) is now stored in save
games. Any sounds that were playing when you saved will still be
playing when you load. (Try saving while Korax is making a speech in
Hexen to hear it.)
* Using snd_reset will also preserve any playing sounds.
* Movie playback is disabled, probably forever. I did not want to
update the MovieDisable/ResumeSound stuff for the new eviction
tracking code. A properly updated movie player will use the VMR,
which doesn't need these functions, since it would pipe the sound
straight through the sound system like everything else, so I decided
to dump them now, which leaves the movie player in a totally unworkable
state.
June 26, 2008
- Changed S_Sound() to take the same floating point attenuation that the
internal S_StartSound() uses. Now ambient sounds can use the public
S_Sound() interface.
- Fixed: S_RelinkSound() compared the points of the channels against the
from actor's point, rather than checking the channels' mover.
- Changed Strife's animated doors so that their sounds originate from the
interior of the sector making them and not from the entire vertical height
of the map.
SVN r1055 (trunk)
won't be left on the stack at exit.
- Fixed: PSymbol needs a virtual destructor so that PSymbolActionFunction can
free its Arguments.
- Symbols for native classes are now freed on exit.
SVN r1022 (trunk)
capturing the mouse.
- Changed: Telefragging should not thrust the victim if it isn't in precisely the
same position as the killer.
- fixed: A_SpawnItemEx must call P_TeleportMove before checking the spawned
object's position.
SVN r1014 (trunk)
define any new ones of its own, I'm pre-emptively renaming the SNDEAX lump
to REVERBS to remove any possible misunderstanding that this is something
that requires EAX hardware support. (Ideally, it would have been REVERBDEF,
but that's 10 characters long.) The eaxedit console command has also been
renamed to reverbedit for the same reason.
- Fixed: The Palette part of FRemapTable was not initialized with alpha values
other than 0. I'm not sure if it would be better to fix this in the game
palette that it copies from or not, but right now, they get set
unconditionally to 255.
SVN r983 (trunk)
optional freeverb unit.
- Removed ResetEnvironment hack, since with software reverb, losing the
existing reverb when focus is lost isn't a problem.
- Commented out the TiMidity FIXME messages.
SVN r973 (trunk)
and not properly zero-terminated when all 8 characters were used.
- Fixed: Local sound sequence definitions caused a crash because a proper
NULL check was missing.
SVN r933 (trunk)
- Also changed all true color texture creation functions to use proper alpha
values instead of inverted ones.
- Changed FRemapTable so that all palette entries must contain proper alpha
values.
- Fixed: The F1 screen check in m_menu.cpp was missing a NULL pointer check.
- Changed: The boss brain's explosions play weapons/rocklx which is an
unlimited sound. This can become extremely loud. Replaced with a new
sound which is just an alias to weapons/rocklx but has a limit of 4.
SVN r932 (trunk)
- Fixed: MinGW doesn't have _get_pgmptr(), so it couldn't compile i_main.cpp.
- Fixed: MOD_WAVETABLE and MOD_SWSYNTH are not defined by w32api, so MinGW
failed compiling the new MIDI code.
- Fixed: LocalSndInfo and LocalSndSeq in S_Start() need to be const char
pointers, since "" is a constant.
- Fixed: parsecontext.h was missing a newline at the end of the file.
SVN r904 (trunk)
channel when restarting the song, rather than emitting a single note off
event which only has a 1 in 127 chance of being for a note that's playing
on that channel. Then I decided it would probably be a good idea to reset
all the controllers as well.
- Increasing the size of the internal Timidity stream buffer from 1/14 sec
(copied from the OPL player) improved its sound dramatically, so apparently
Timidity has issues with short stream buffers. It's now at 1/2 sec in
length. However, there seems to be something weird going on with
corazonazul_ff6boss.mid near the beginning where it stops and immediately
restarts a guitar on the exact same note.
- Added a new sound debugging cvar: snd_drawoutput, which can show various
oscilloscopes and spectrums.
- Internal TiMidity now plays music.
- Changed the progdir global variable into an FString.
SVN r900 (trunk)
set to NULL before performing the delete. Otherwise, in some abnormal
situations, it could happen that the destroyed screen object is still
being accessed.
- Fixed: V_Shutdown didn't set OF_YesReallyDelete before deleting screen.
SVN r870 (trunk)
that the drivers will treat a BackBufferCount of 0 as a request for
double buffering.
- Fixed: Unsetting a cvar did not remove it from the list of tab
completions.
- Added "" as a synonym for "nullimage" in SBARINFO.
- Fixed: MAKESAVESIG's stringifier in version.h did not work as expected.
It stringified the passed macro name, not the value of the macro.
- Moved DCajunMaster off the DObject hierarchy.
- Changed DCajunMaster::getspawned into a TArray of FStrings. It was
mysteriously being left pointing to uninitialized memory during the
final GC at exit and crashing.
- Fixed: The code that removed hexdd.wad from the list of IWADs when
hexen.wad was not present did not work.
SVN r861 (trunk)
- Removed movie volume from the sound menu and renamed some of the other
options to give the MIDI device name more room to display itself.
- Moved the midi device selection into the main sound menu.
- Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the
default device. By default, it uses exactly the same DLS instruments as the
Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set
you want to use, set the snd_midipatchfile cvar to specify where it should
load the instruments from.
- Changed the ProduceMIDI function to store its output into a TArray<BYTE>.
An overloaded version wraps around it to continue to supply file-writing
support for external Timidity++ usage.
- Added an FMOD credits banner to comply with their non-commercial license.
- Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather
than a time in ms, this is now the length in samples of the DSP buffer.
Also added the snd_buffercount cvar to offer complete control over the
call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate
below about 44kHz, you will need to set snd_buffersize to avoid long
latencies.
- Reimplemented the snd_output cvar for the FMOD Ex sound system.
- Changed snd_samplerate default to 0. This now means to use the default
sample rate.
- Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and
snd_hrtf available through the menu.
- Split the HRTF effect selection into its own cvar: snd_hrtf.
- Removed 96000 Hz option from the menu. It's still available through the
cvar, if desired.
- Fixed: If Windows sound init failed, retry with DirectSound. (Apparently,
WASAPI doesn't work with more than two speakers and PCM-Float output at the
same time.)
- Fixed: Area sounds only played from the front speakers once you got within
the 2D panning area.
SVN r854 (trunk)
of status bar face graphics belonging to skins.
SBARINFO update #15
- Fixed: Monospacing fonts wasn't quite correct.
- Fixed: The new mug shot code forgot to use the first arg of drawmugshot (the
one that picks the default sprite prefix).
- Added: lowerHealthCap variable to SBarInfo, which is set to true by default.
- Added: ininventory event to SBarInfo to detect if one or two items are in (or
not in) the player's inventory.
- Added: The ability to print global vars using drawnumber. I need someone to
test it though.
- Added: aspectratio command to detect what the user's aspect ratio is.
- Added: missing spacing argument to drawstring.
- Changed the sbarinfo display routine for drawnumber to not use cmd.value to
store what it is about to display. Now it uses a new variable.
- More conversions from DrawImage to screen->DrawTexture. I think only the
inventory bar drawing functions have to be changed now.
SVN r846 (trunk)
class so they all the low-level details of MIDI streaming are kept in
one place.
- Converted the SMF MIDI playback to use the same MIDI streams as MUS
playback.
- Moved MUS playback back into its own thread so that it can continue
uninterrupted if the main thread is too busy to service it in a timely
manner.
- Fixed: The MEVT_* values are not defined shifted into their spot for a
MIDIEVENT, so I need to do it myself.
- Fixed: Pausing a MUS and the changing snd_midivolume caused the paused
notes to become audible.
SVN r784 (trunk)
of ZDoom, except now the entire song isn't prebuffered in large chunks, so
I can insert MIDI events into the playback with fairly low latency. This
should offer more precise timing than the combination of low-level MIDI and
WaitForSingleObject timeouts.
SVN r783 (trunk)
- Fixed two problems with printfs from the net controller stuff: one of them
is totally valid, and the other is GCC not being as nice as VC++.
- Fixed: The case for defining SAVESIG when SVN_REVISION_NUMBER == 0 did not
work for GCC (and presumably VC++, though I never ran into that case with
it) because it tried to stringify something that wasn't a macro argument.
SVN r762 (trunk)
- Fixed: The MusicVolumes list was allocated with M_Malloc but freed with
delete.
- Fixed: demobuffer was inconsistantly handled with new[]/delete[] and
malloc/free.
- Added used memory tracking to M_Malloc() and M_Realloc(). This
necessitated the addition of an M_Free() call to track frees.
- Removed M_Calloc since it was only used in one place, and can just as well
be done with an M_Malloc/memset pair.
- Bumped DEMOGAMEVERSION for the new net controller codes.
SVN r751 (trunk)
- Disabled console alpha when the console is fullscreen.
- Re-enabled maybedrawnow for the software renderer. This should be replaced
with a different progress bar implementation at some point that can work
with hardware graphics.
SVN r747 (trunk)
frame to avoid the remote possibility that it could change during the middle
of drawing the frame and cause strange things to happen.
- Renamed test2d to vid_hw2d.
SVN r744 (trunk)
- Added .txt files to the list of types (wad, zip, and pk3) that can be
loaded without listing them after -file.
- Fonts that are created by the ACS setfont command to wrap a texture now
support animated textures.
- FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn
with the hardware 2D path instead of being restricted to the game palette.
- Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1
on a Radeon 9000.
- Added back the off-by-one palette handling, but in a much more limited
scope than before. The skipped entry is assumed to always be at 248, and
it is assumed that all Shader Model 1.4 cards suffer from this. That's
because all SM1.4 cards are based on variants of the ATI R200 core, and the
RV250 in a Radeon 9000 craps up like this. I see no reason to assume that
other flavors of the R200 are any different. (Interesting note: With the
Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the
debug Direct3D 9 runtime, but it works perfectly fine with the retail
Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its
math inside pixel shaders. That would explain perfectly why I can't use
constants greater than 1 with PS1.4 and why it can't do an exact mapping to
every entry in the color palette.
- Fixed: The software shaded drawer did not work for 2D, because its selected
"color"map was replaced with the identitymap before being used.
- Fixed: I cannot use Printf to output messages before the framebuffer was
completely setup, meaning that Shader Model 1.4 cards could not change
resolution.
- I have decided to let remap palettes specify variable alpha values for
their colors. D3DFB no longer forces them to 255.
- Updated re2c to version 0.12.3.
- Fixed: A_Wander used threshold as a timer, when it should have used
reactiontime.
- Fixed: A_CustomRailgun would not fire at all for actors without a target
when the aim parameter was disabled.
- Made the warp command work in multiplayer, again courtesy of Karate Chris.
- Fixed: Trying to spawn a bot while not in a game made for a crashing time.
(Patch courtesy of Karate Chris.)
- Removed some floating point math from hu_scores.cpp that somebody's GCC
gave warnings for (not mine, though).
- Fixed: The SBarInfo drawbar command crashed if the sprite image was
unavailable.
- Fixed: FString::operator=(const char *) did not release its old buffer when
being assigned to the null string.
- The scanner no longer has an upper limit on the length of strings it
accepts, though short strings will be faster than long ones.
- Moved all the text scanning functions into a class. Mainly, this means that
multiple script scanner states can be stored without being forced to do so
recursively. I think I might be taking advantage of that in the near
future. Possibly. Maybe.
- Removed some potential buffer overflows from the decal parser.
- Applied Blzut3's SBARINFO update #9:
* Fixed: When using even length values in drawnumber it would cap to a 98
value instead of a 99 as intended.
* The SBarInfo parser can now accept negatives for coordinates. This
doesn't allow much right now, but later I plan to add better fullscreen
hud support in which the negatives will be more useful. This also cleans
up the source a bit since all calls for (x, y) coordinates are with the
function getCoordinates().
- Added support for stencilling actors.
- Added support for non-black colors specified with DTA_ColorOverlay to the
software renderer.
- Fixed: The inverse, gold, red, and green fixed colormaps each allocated
space for 32 different colormaps, even though each only used the first one.
- Added two new blending flags to make reverse subtract blending more useful:
STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that
gets blended with the background, since that seems like a good idea for
reverse subtraction. They also work with the other two blending operations.
- Added subtract and reverse subtract blending operations to the renderer.
Since the ERenderStyle enumeration was getting rather unwieldy, I converted
it into a new FRenderStyle structure that lets each parameter of the
blending equation be set separately. This simplified the set up for the
blend quite a bit, and it means a number of new combinations are available
by setting the parameters properly.
SVN r710 (trunk)
* Fixed: Drawbar had a few memory leaks.
- Added another temporary cvar called pc to play with the multipiler used by D3DFB::SetPaletteTexture().
SVN r704 (trunk)
truncate the coordinates to integers before sending them to the hardware.
Otherwise, there can be one pixel gaps compared to the software renderer,
because the hardware is rounding to nearest but the software renderer is
simply truncating the fractional part of the coordinate. This is the real
cause of the gap above the status bar at 1152x864 (and another gap to the
left of the status bar at 800x500).
- Fixed: When D3DFB::DrawTextureV had to clip a tile, it adjusted the
texture coordinates erroneously, still using the old calculations from
before texture packing was implemented.
SVN r695 (trunk)
of the frame buffer so I can get rid of the last remaining renderer check
outside the display code in GZDoom.
- made V_SetResolution a virtual function in IVideo. It's probably not a perfect
solution but at least it allows overriding it (which I need in GZDoom.)
Note: There's a lot of redundancy between hardware.cpp/h in the SDL and Win32
folders so some cleaning up might be a good idea.
SVN r692 (trunk)
can share the same hardware texture. This greatly reduces the number of
DrawPrimitive calls that need to be made when drawing text (or any 2D
graphics in general), so now hardware text is much faster than software text
all around. (As an example, one scenario went from 315 fps to over 1635 fps
for hardware, compared to 540 fps for software.)
SVN r687 (trunk)
- Modified M_DrawFrame() and R_DrawTopBorder() so that they call FlatFill() to
draw the edges of the frames. This at least seems a bit faster for hardware
2D.
- Implemented FlatFill() for D3DFB. It seems to be exactly as fast as the
default implementation that just calls DrawTexture() to tile the pieces onto
the screen, so I'm not sure it was worth the bother.
SVN r686 (trunk)
vertex buffer, made line batching automatic, and added an index buffer for
use when batching quads. The index buffer actually offered more of a
performance boost than simply batching the quads alone did.
SVN r685 (trunk)
players are on teams.
- Set TEAM_None back to 255. Since a player's team has already been accessible
through ACS, needlessly redefining this is a bad thing to do, since it can
break existing maps. 255 different teams should still be more than enough.
- Fixed: At certain resolutions, there was a one pixel row between the status
bar and the rest of the screen, thanks to rounding error.
- Added automatic batching of quads to D3DFB. Screens with a lot of text are
ever-so-slightly faster now, though still only about half the speed of
sofware-only text. I suppose the only way to see a marked improvement is
going to be by stuffing multiple glyphs in a single texture.
- Fixed: Crosshairgrow's animation was not framerate-independent.
SVN r668 (trunk)
and into the vertex data.
- Added functions for doing line drawing with Direct3D, including a new pair
of functions to do batched line drawing so that the map can actually be
drawn faster in hardware than in software (instead of an order of magnitude
slower).
SVN r663 (trunk)
shader seems to be producing crappy output, so it's disabled for now.
Specifically, it produces distorted output at regular intervals for
textures that aren't power-of-2-sized, and it's still doing visible
filtering when the texture is rendered at its original size, so
obviously it's not doing something right.
- Fixed the use of power-of-2-sized native textures for smaller game
textures again.
- Fixed: D3DFB did not restore all the state it needed to after resetting
the device.
- Fixed: R_DrawTopBorder() must clip itself around the 3D view, since it's
now drawn later.
- With full software rendering, palette flashes once again effect the whole
screen.
Changes I neglected to put in the previous commit log:
- Moved the view border drawing into the 2D mode part. When using Begin2D()
now, the only part of the software buffer that gets updated to the screen
is the part with the actual 3D scene and only if you tell it to.
- Fixed a D3D memory leak on every frame in windowed mode and the same thing
for the screen wipes. Note to self: If it's an interface, be sure to
Release it, because it will be AddRef'ed before being returned to you.
- Moved the BlendView() call out of FBaseStatusBar::Draw() so that it can be
applied before copying the 3D scene to the screen underneath the 2D parts.
- Restored the console's darkening level to its old table-based amount.
- Fixed D3DFB::SetColorOverlay()'s incorrect calculations.
- Fixed the D3D screen wipes for letterboxed modes.
SVN r662 (trunk)
since I couldn't think of any reason why it should be grabbed at any other
time. (This only applies to windowed mode, where it makes sense to let the
OS have control of the pointer.)
SVN r661 (trunk)
a long-abandoned experiment to write directly to video memory instead of
to a temporary buffer in system meroy.
- Added Direct3D versions of the melt and burn screenwipes.
- Fixed the strip sizes for the melt screenwipe to match what Doom would have
produced on a 320x200 screen, rather than producing more, thinner strips
for wider screens.
SVN r659 (trunk)
allocated. (I wonder if D3D actually handles this automatically when you use
D3DPOOL_MANAGED, because I'm pretty sure my laptops's x300 doesn't support
non-power-of-2 texture sizes, yet it worked just fine before.)
- Fixed vertical positioning of 2D elements in letterboxed modes.
SVN r653 (trunk)
drawn to a texture, then that texture is copied to the real back buffer
using a gamma-correcting pixel shader. In fullscreen mode, SetGammaRamp
is used.
- Fixed flashing of vid_fps display when fps > 1000.
- Fixed loading of RGB textures for native 2D mode.
- Changed the first rotozoomer's data because it just became too obvious when
the backdrop is drawn with a full 256 distinct colors available.
- Set the player backdrop to update no more frequently than 35 FPS, so opening
the player setup menu before starting a game won't produce a very fast
moving backdrop.
- Changed the player backdrop into a texture so that it can be drawn like
anything else.
SVN r648 (trunk)
- Moved the common code of ACS and DECORATE translation generation into the
FRemapTable class.
- Fixed: The DECORATE translation code was not changed for the new data structures.
- Expanded range of ACS and DECORATE translations to 65535.
- Fixed: R_CopyTranslation was not altered for the new functionality.
I removed the function and replaced the one use with a simple assignment.
SVN r644 (trunk)
palettes smaller than 256 entries with the shader I wrote for it. Is there
a list of gotchas like this listed some where? I'd really like to see it.
Well, when compiled with SM2.0, the PalTex shader seems to be every-so-
slightly faster on my GF7950GT than the SM1.4 version, so I guess it's a
minor win for cards that support it.
- Fixed: ST_Endoom() failed to free the bitmap it used.
- Added the DTA_ColorOverlay attribute to blend a color with the texture
being drawn. For software, this (currently) only works with black. For
hardware, it works with any color. The motiviation for this was so I could
rewrite the status bar calls that passed DIM_MAP to DTA_Translation to
draw darker icons into something that didn't require making a whole new
remap table.
- After having an "OMG! How could I have been so stupid?" moment, I have
removed the off-by-one check from D3DFB. I had thought the off-by-one error
was caused by rounding errors by the shader hardware. Not so. Rather, I
wasn't sampling what I thought I was sampling. A texture that uses palette
index 255 passes the value 1.0 to the shader. The shader needs to adjust the
range of its palette indexes, or it will end up trying to read color 256
from the palette texture when it should be reading color 255. Doh!
- The TranslationToTable() function has been added to map from translation
numbers used by actors to the tables those numbers represent. This function
performs validation for the input and returns NULL if the input value
is invalid.
- Major changes to the way translation tables work: No longer are they each a
256-byte array. Instead, the FRemapTable structure is used to represent each
one. It includes a remap array for the software renderer, a palette array
for a hardware renderer, and a native texture pointer for D3DFB. The
translationtables array itself is now an array of TArrays that point to the
real tables. The DTA_Translation attribute must also be passed a pointer
to a FRemapTable, not a byte array as previously.
- Modified DFrameBuffer::DrawRateStuff() so that it can do its thing properly
for D3DFB's 2D mode. Before, any fullscreen graphics (like help images)
covered it up.
SVN r640 (trunk)
- Added a new color parameter to DCanvas::Clear() that specifies the
ARGB value of the color. This is used if the old color parameter,
which specifies a palette entry, is -1.
SVN r617 (trunk)
if present.
- Modified GZDoom's true color texture copy functions and added them
to generate 32 bit D3D textures. Paletted TGAs and PCXs are also handled
this way but I don't think these 2 formats are worth some more special
handling.
(Question: Is it worth it to implement special handling for paletted PNGs
so that they are used as 8 bit textures internally?)
SVN r608 (trunk)
They are not actually drawn with it yet, nor is it complete, but it's
something to start with.
- Split up DCanvas::DrawTexture() into more pieces to make it easier to
virtualize.
- Removed support for non-32-bit palette textures from D3DFB. What kind of
card supports pixel shaders but not 32-bit textures?
SVN r605 (trunk)
- Updated project files for nasm 2.0, which is now named nasm.exe for the
Windows version, rather than nasmw.exe. Also fixed the annoying new warnings
it generated.
SVN r593 (trunk)
receives the input focus. When the pane is closed, the focus doesn't
return to any window, so even though the window is still active, it no
longer has the focus and does not receive input events.
- Fixed: The network synch timer was still left running after the game
started. (Windows only)
- Fixed: When a player leaves the game at the exact moment they are being
damaged, the game could crash because their actor still had a valid player
pointer, but the player's mo pointer had been NULLed.
SVN r588 (trunk)
installed. If so, it checks your SteamApps directory for any IWADs you may
have purchased through Steam and adds any it finds to the list of available
IWADs you can play. This means that if you bought your id games through
Steam, you can just extract ZDoom anywhere you like and run it without doing
any additional setup.
SVN r581 (trunk)
NetDone.
- moved the DIM_MAP define into v_palette.h so that it can be accessed
from outside the status bar code.
- Fixed: The check for non-swimmable water in UpdateWaterLevel checked for
SECF_UNDERWATER instead of SECF_UNDERWATERMASK.
SVN r514 (trunk)
- The net start pane is now given focus when it is created, so it can
receive keyboard input.
- Added playback of the "WeaponPickup" sound when a Hexen net game starts.
- Separated the different startup screens into classes for better
modularization (which I should have done in the first place). (Sorry,
have not done it for Linux yet, so that won't compile as-is.)
SVN r496 (trunk)
of scrunching the startup screen up to make room for it.
- Added the red net notches for Hexen's startup screen.
- Added hprintf and status simulation for Heretic's startup screen.
SVN r495 (trunk)
position when not playing in fullscreen mode.
- Changed the upper-left window positioning that was always used in debug
builds into a command line option (-0), so debug and release builds behave
the same.
SVN r482 (trunk)
.rtext files in the assembly object files. Now I can avoid doing this at
runtime, which means that ZDoom is now UPX-compatible if anyone wants to
pack it.
You will need to do a rebuild or manually delete the old assembly .obj files
for the first build from this revision to succeed, since there are no
changes to the assembly files themselves, and the build process will not be
able to automatically detect that they need to be rebuilt.
SVN r473 (trunk)
P_TranslateLinedefs.
- Fixed: ShowErrorPane can be called before ST_NetDone is valid so it has to
check whether it is NULL.
- Fixed: The Megasphere had an incorrect pickup sound.
- Fixed: The new video initialization code could set the screen's Font pointer
to NULL, causing a crash with levels that start in a secret sector.
SVN r464 (trunk)
Normally Direct3D sets the FPU to single precision. We don't want that,
since it can mean going out of sync with machines that are using the
standard precision. Additionally, the nodebuilder requires the extra
precision that single precision lacks.
SVN r455 (trunk)
MAPINFO keyword 'bordertexture' and are settable per map.
- Fixed: When used in DECORATE A_Explode must use A_ExplodeParms.
- Added custom label support to A_Chase. To enable resurrection from the
customizable version I also moved all A_VileChase stuff into p_enemy.cpp.
SVN r437 (trunk)
- Fixed: The screen wipe must be disabled for Heretic's underwater ending. If
not, the wipe will try to mix pictures with different palettes.
SVN r435 (trunk)
both named item.
- Switched ddraw.dll to be delay loaded. With D3D9 now being the default
display code, this avoids wasting time loading DDraw if it isn't needed.
- Fixed: The Win32 I_FatalError() did not set alreadyThrown, so it could get
stuck in an endless fatal error loop.
SVN r433 (trunk)
wadsrc/Makefile, nor did it use the makefile for cleaning.
- Added ST_NetMessage() for mixing miscellaneous messages with the network
startup meter, since they get mixed in the same space on the Linux terminal
and must be handled properly to avoid looking bad.
SVN r429 (trunk)
- Fixed: The host would let more than the desired number of players connect.
- Decreased the frequency of packets in ST_NetLoop() to two per second.
- Fixed: During the i_net handshaking, guests never verified that the messages
they received were from the host.
- Removed the -net command line option. I'm not sure it even worked anymore.
SVN r421 (trunk)
warnings. At first, I was going to try and clean them all up. Then I decided
that was a worthless cause and went about just acting on the ones that
might actually be helpful:
C4189 (local variable is initialized but not referenced)
C4702 (unreachable code)
C4512 (assignment operator could not be generated)
SVN r420 (trunk)
otherwise it gets reset to black and unused.
- Fixed: I_SetWndProc() needs to be called before any of the DirectX
interfaces are initialized, because DirectX subclasses the window itself,
and I_SetWndProc() undoes that subclassing.
SVN r419 (trunk)
be surprised if it doesn't work.
- Reorganized the network startup loops so now they are event driven. There is
a single function that gets called to drive it, and it uses callbacks to
perform the different stages of the synchronization. This lets me have a nice,
responsive abort button instead of the previous unannounced hit-escape-to-
abort behavior, and I think the rearranged code is slightly easier to
understand too.
- Increased the number of bytes for version info during D_ArbitrateNetStart(),
in preparation for the day when NETGAMEVERSION requires more than one byte.
- I noticed an issue with Vista RC1 and the new fatal error setup. Even after
releasing a DirectDraw or Direct3D interface, the DWM can still use the
last image drawn using them when it composites the window. It doesn't always
do it but it does often enough that it is a real problem. At this point, I
don't know if it's a problem with the release version of Vista or not.
After messing around, I discovered the problem was caused by ~Win32Video()
hiding the window and then having it immediately shown soon after. The DWM
kept an image of the window to do the transition effect with, and then when
it didn't get a chance to do the transition, it didn't properly forget about
its saved image and kept plastering it on top of everything else
underneath.
- Added a network synchronization panel to the window during netgame startup.
- Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL.
Otherwise, classic DECORATE definitions generate a big, fat crash.
- Resurrected the R_Init progress bar, now as a standard Windows control.
- Removed the sound failure dialog. The FMOD setup already defaulted to no
sound if initialization failed, so this only applies when snd_output is set
to "alternate" which now also falls back to no sound. In addition, it wasn't
working right, and I didn't feel like fixing it for the probably 0% of users
it affected.
- Fixed: The edit control used for logging output added text in reverse order
on Win9x.
- Went back to the roots and made graphics initialization one of the last
things to happen during setup. Now the startup text is visible again. More
importantly, the main window is no longer created invisible, which seems
to cause trouble with it not always appearing in the taskbar. The fatal
error dialog is now also embedded in the main window instead of being a
separate modal dialog, so you can play with the log window to see any
problems that might be reported there.
Rather than completely restoring the original startup order, I tried to
keep things as close to the way they were with early graphics startup. In
particular, V_Init() now creates a dummy screen so that things that need
screen dimensions can get them. It gets replaced by the real screen later
in I_InitGraphics(). Will need to check this under Linux to make sure it
didn't cause any problems there.
- Removed the following stubs that just called functions in Video:
- I_StartModeIterator()
- I_NextMode()
- I_DisplayType()
I_FullscreenChanged() was also removed, and a new fullscreen parameter
was added to IVideo::StartModeIterator(), since that's all it controlled.
- Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's
initialized post-1.22.
SVN r416 (trunk)
- Fixed: If the FBTexture wasn't exactly the same size as the screen,
D3DFB::PaintToWindow() would still lock it with D3DLOCK_DISCARD. Alas,
I saw no speedup for using a dirty region. (Side note: The Radeons are
apparently slower compared to DirectDraw because they must do
power-of-2 textures. If they ever add non-power-of-2 support like nvidia,
I assume they will also see a speed gain.)
- Changed fb_d3d9.cpp so that instead of trying to compensate for Geforce
off-by-one errors in the pixel shader, it automatically detects where
the error occurs and modifies the way the palette is uploaded to
compensate. Palette color 255 is then represented using the texture
border color instead of actually being part of the palette. This should
work correctly with all cards, since I had a report of an FX where the
off-by-one occurred in a different spot from the place where I observed
it on a 6 and 7 series cards. Since the shader now has one fewer
instruction, I notice a very marginal speedup. (Interestingly, removing
the flash blending from the shader had no perceivable performance gain.)
SVN r399 (trunk)
the build process can run uninterrupted under Vista.
- Fixed: DIRECT3DCREATE9FUNC needs WINAPI added to its prototype so that it
works properly in release build, which defaults to __fastcall.
SVN r385 (trunk)
to PO_MovePolyobj() from P_SerializePolyobjs() for a crushing polyobject
that touches a player actor will not have a valid actor->player->mo chain
for P_DamageMobj and crash if it happens to touch the player. Since the
polyobject was presumably in a good spot when the game was saved, we can
just skip this step entirely and let it take care of itself the next time
it moves (by which time, the players will be valid).
- Fixed: When transitioning from fullscreen to windowed mode with D3DFB, the
window kept the WS_EX_TOPMOST style.
- Slight correctness fix: When in fullscreen, the window should have WS_POPUP
style.
- Added a NULL target check to P_SpawnMissileXYZ(), A_DemonAttack1(),
A_DemonAttack2_1(), and A_DemonAttack2_2().
SVN r384 (trunk)
ga_autosave, write DEM_CHECKAUTOSAVE to the net stream. When this is
processed, it will check if it's okay to do an autosave. If it is, it writes
DEM_DOAUTOSAVE to the net stream, which the sets gameaction to ga_autosave.
Essentially, about half of the functionality was moved out of G_DoAutoSave()
and into Net_DoCommand().
- Minor changes to OS detection: The os_WinNT enumeration has been renamed to
os_WinNT4, since every new OS coming out of Microsoft these days is
essentially NT. NT 5.2 and 6.0 are now properly identified as "Windows
Server 2003" and "Windows Vista" respectively, and any unknown NT versions
Microsoft introduces in the future will now be displayed as "Windows NT"
instead of "Windows 2000" if the minor version is 0 and "Windows XP" if the
minor version is non-0. Win32s detection has also been removed. Presumably
if somebody is foolish enough to try to run this on Windows 3.x with Win32s,
it won't even load due to missing DLLs.
- Fixed: Demos with NETD chunks should not set netgame to true unless they
have more than one player. And since netdemo is ignored if netgame is
false, it doesn't need to set that either.
- Fixed: FTexture::GetScaled* functions did not check for scale values of 0.
SVN r354 (trunk)
could not be saved for some reason.
- Added the writeini console command to write the config file, optionally
specifying a specific file name for it.
- Fixed: "Multiplayer" demos that only had one player were not played back
properly because the demo playback code only checked the number of players
to determine if it should be played as a netdemo.
SVN r333 (trunk)
- If you aren't targeting x86, m_fixed.h only includes basicinlines.h now.
- Moved x64inlines.h into basicinlines.h.
- Replaced uses of __int64 with types from doomtype.h.
- The stop console command no longer ends single player games, just the demo
that was being recorded.
- In C mode, the sc_man parser no longer allows multi-line string constants
without using the \ character to preface the newline character. This makes
it much easier to diagnose errors where you forget the closing quote of a
string.
- Fixed: V_BreakLines() added the terminating '\0' to the last line of the
input string.
- Added font as a parameter to V_BreakLines and removed its keepspace
parameter, which was never passed as anything other than the default.
SVN r331 (trunk)
- The stat meters now return an FString instead of sprintfing into a fixed
output buffer.
- NOASM is now automatically defined when compiling for a non-x86 target.
- Some changes have been made to the integral types in doomtype.h:
- For consistancy with the other integral types, byte is no longer a
synonym for BYTE.
- Most uses of BOOL have been change to the standard C++ bool type. Those
that weren't were changed to INTBOOL to indicate they may contain values
other than 0 or 1 but are still used as a boolean.
- Compiler-provided types with explicit bit sizes are now used. In
particular, DWORD is no longer a long so it will work with both 64-bit
Windows and Linux.
- Since some files need to include Windows headers, uint32 is a synonym
for the non-Windows version of DWORD.
- Removed d_textur.h. The pic_t struct it defined was used nowhere, and that
was all it contained.
SVN r326 (trunk)
is not available under Windows 95. Since this is (or at least should be) the
only thing preventing us from running under Windows 95, I added a stub that
replaces __imp__IsDebuggerPresent@0 with a pointer to a function that checks
for the real thing.
SVN r279 (trunk)
intelligently pick the value to use for TranslucentLine's second argument.
- Added a queryiwad_key cvar to control which key can force the IWAD selection
to appear. It can be either "shift" or "control". Any other value will
disable its functionality.
- Fixed: A_SkullPop() and A_FreezeDeathChunks() did not transfer the player's
inventory to the new dismembered head "player".
SVN r268 (trunk)
using duplicate DoomEdNums and will affect all attempts to spawn the
replaced actor. However, because this happens for all spawns and not just
at map load, the replacing actor must be compatible with the replaced
actor, which means that an actor can only serve as a replacement for one
of its baseclasses. For example, if you want to use a modified imp, you can
use this DECORATE:
actor MyImp : DoomImp replaces DoompImp
{
// Put changed properties here
}
- New: The IWAD dialog now remembers the last IWAD you picked and
automatically highlights it the next time you run the game. This also
applies if you check "Don't ask me this again": The IWAD selected will be
the one that gets automatically loaded, not the one located first. (Using
the -iwad parameter will not change the default IWAD.) In addition, you
can now bring the dialog up even if you disable it by holding down SHIFT
during startup.
- Changed ExtractFilePath() and ExtractFileBase() to return FStrings instead
of writing to a provided output buffer. ExtractFileBase() can also
optionally keep the file's extension in the result.
- Removed the -heapsize parameter entirely. The informational message should
no longer be needed.
- Removed -maxdemo parameter. There's no point to having it around since
the demo buffer grows automatically.
SVN r238 (trunk)
yanking the mouse around if they keys haven't been read yet to combat the
same situation that causes the keyboard to return DIERR_NOTACQUIRED in
KeyRead(): The window is sort of in focus and sort of not. User.dll
considers it to be focused and it's drawn as such, but another focused
window is on top of it, and DirectInput doesn't see it as focused.
- Fixed: KeyRead() should handle DIERR_NOTACQUIRED errors the same way it
handles DIERR_INPUTLOST errors. This can happen if our window had the
focus stolen away from it before we tried to acquire the keyboard in
DI_Init2(). Strangely, MouseRead_DI() already did this.
- When a stack overflow occurs, report.txt now only includes the first and
last 16KB of the stack to make it more manageable.
- Limited StreamEditBinary() to the first 64KB of the file to keep it from
taking too long on large dumps.
- And now I know why gathering crash information in the same process that
crashed can be bad: Stack overflows. You get one spare page to play with
when the stack overflows. MiniDumpWriteDump() needs more than that and
causes an access violation when it runs out of leftover stack, silently
terminating the application. Windows XP x64 offers SetThreadStackGuarantee()
to increase this, but that isn't available on anything older, including
32-bit XP. To get around this, a new thread is created to write the mini
dump when the stack overflows.
- Changed A_Burnination() to be closer to Strife's.
- Fixed: When playing back demos, DoAddBot() can be called without an
associated call to SpawnBot(). So if the bot can't spawn, botnum can
go negative, which will cause problems later in DCajunMaster::Main()
when it sees that wanted_botnum (0) is higher than botnum (-1).
- Fixed: Stopping demo recording in multiplayer games should not abruptly
drop the recorder out of the game without notifying the other players.
In fact, there's no reason why it should drop them out of multiplayer at
all.
- Fixed: Earthquakes were unreliable in multiplayer games because
P_PredictPlayer() did not preserve the player's xviewshift.
- Fixed: PlayerIsGone() needs to stop any scripts that belong to the player
who left, in addition to executing disconnect scripts.
- Fixed: APlayerPawn::AddInventory() should also check for a NULL player->mo
in case the player left but somebody still has a reference to their actor.
- Fixed: DDrawFB::PaintToWindow() should simulate proper unlocking behavior
and set Buffer to NULL.
- Improved feedback for network game initialization with the console ticker.
- Moved i_net.cpp and i_net.h out of sdl/ and win32/ and into the main source
directory. They are identical, so keeping two copies of them is bad.
- Fixed: (At least with Creative's driver's,) EAX settings are global and not
per-application. So if you play a multiplayer ZDoom game on one computer
(or even another EAX-using application), ZDoom needs to restore the
environment when it regains focus.
- Maybe fixed: (See http://forum.zdoom.org/potato.php?t=10689) Apparently,
PacketGet can receive ECONNRESET from nodes that aren't in the game. It
should be safe to just ignore these packets.
- Fixed: PlayerIsGone() should set the gone player's camera to NULL in case
the player who left was player 0. This is because if a remaining player
receives a "recoverable" error, they will become player 0. Once that happens,
they game will try to update sounds through their camera and crash in
FMODSoundRenderer::UpdateListener() because the zones array is now NULL.
G_NewInit() should also clear all the player structures.
SVN r233 (trunk)
the resource script so that Developer Studio won't replace the version macros
in it with their literal values. Now updating version.h is guaranteed to be
enough to bump the version everywhere it's used.
SVN r225 (trunk)
- Went back to a single process model for crash reporting. It appears there
are some machines that don't like having another process collect the
information and report it. I still feel that having another process do
it _should_ be more reliable, because that process can execute in a known
good state. Ah well. I haven't yet seen anything that left the main process
in a totally unrecoverable state, so it's probably okay. Unlike before, this
single-process version is still GCC-compatible.
SVN r217 (trunk)
while and killing centaurs with the flechette.
- Fixed: Moving to an old level in a hub caused the old player's inventory to
spawn owned by the current player (but still hanging off the old player), so
the game would hang when trying to delete it.
- Modified re2c so that it doesn't add a date to the file it generates. Thus,
if it regenerates a file during a full rebuild, SVN won't see it as a change.
Also updated it to 0.10.5.
- Fixed: SC_GetString() did not properly terminate sc_String when the last
token in the file had no white space after it. Since I could not actually
find the problem (it works fine in debug mode and I saw no logic errors),
I decided to take this opportunity to reimplement it using an re2c-generated
scanner. Now it's 1.6x faster than before and correctness is easier to
verify.
- Fixed: FMODSoundRenderer::Shutdown() also needs to reset NumChannels.
- Added back the Manifest to zdoom.rc for non-VC8 Windows compilers.
- Fixed MinGW compilation again. Now it uses the same method as Makefile.linux
to find all the source files so that it doesn't need to be manually updated
each time source files are added or removed.
- Added the SVN revision number to the version string. A new tool is used to
obtain this information from the svnversion command and write it into a
header file. If you don't have the svn command line tools installed or didn't
check it out from the repository, you can still build. I added some rules for
this to Makefile.linux, and I assume they work because they do for
Makefile.mingw.
- Fixed: MIDISong2 did not delete MusHeader in its destructor.
SVN r200 (trunk)
data enough (2 bits instead of 8), so it was super loud and aliased.
- Fixes for GCC 4.1: Several type-punned pointer warnings, but more
importantly, declaring a friend function inside a class body is no longer
enough to declare that function globally; you must declare it again outside
the class.
- Upgraded FArchive::SerializePointer so that it can store 32-bit indices.
- ACS printing pcodes now build their string in an FSttring instead of a fixed
sized buffer on the stack.
SVN r145 (trunk)
- Did some very preliminary support for x64 compiling.
- Now I see why makewad is using the __fastcall calling convention by default:
Because the release zlib is built with it as well.
- Fixed: Conversion from 'const char *' to 'char *' in DEM_SAVEGAME case in
Net_DoCommand().
- Updated the project files for Visual C++ 2005.
SVN r138 (trunk)
- Changed f_finale.cpp/atkstates[] into a static variable, since its
anonymous type prevents it from being accessed from other files anyway.
- Fixed: The behavior of the eventtail advancement in d_net.cpp/CheckAbort()
was compiler-dependant.
- Fixed warnings GCC 4 threw up while compiling re2c and lemon.
- Removed __cdecl from makewad.c again. This is already defined as a builtin
for MinGW, and redefining it produces a warning. (Why is main explicitly
declared __cdecl anyway?)
- Fixed building ccdv-win32 with GCC 4. GCC 4 creates a memcpy call, which
won't work because it doesn't get linked with the standard C library.
SVN r135 (trunk)
- New: Pausing the game (through any means, not just the pause key) now pauses
sound effects as well as music. "PauseMusicInMenus" has been added as a
MAPINFO flag to also pause the music when a menu or the console are open.
SVN r134 (trunk)
other more important message types which have lower priority for some
reason.
- Added a menu option for show_messages after accidentally switching it
off far too often and wondering why no messages appear.
- Added crouching DoomPlayer sprites submitted by Enjay.
- Fixed DF_NO_CROUCH was not checked.
- Fixed: The intermission script parser had some of its cases in the
keyword parser incorrectly sorted.
- Fixed: atterm was still defined to take a STACK_ARGS function argument.
- Added an AltFlash state for weapons.
- Turned FloatSpeed into an actor property and changed the value to 5
for all floating Strife actors, as a comment in the source indicated.
(r114 below):
- Added GZDoom's code for Vavoom slope things because I wanted to test
something with a map from Silent Steel.
- Added nocrouch and allowcrouch MAPINFO commands and a DF_NO_CROUCH
dmflag.
- Added GZDoom's crouching code after cleaning it up so that adding
crouching sprites will be easier.
SVN r115 (trunk)
message. When trying to puke a script outside a map it crashed.
- Fixed: The random number generator for large numbers must mask out the
sign bit before performing a modulo.
- Now that the conversation states are pointers there is no need to make
AActor::ConversationAnimation virtual. No class overrides this method
anymore.
- Replaced AMacil1::TakeSpecialDamage with MF5_NODAMAGE.
- Fixed: AMacil2::TakeSpecialDamage and AOracle::TakeSpecialDamage didn't
check whether inflictor was NULL and crashed when used with 'kill monsters'.
- Fixed: Some Strife decorations didn't loop their animation
SVN r113 (trunk)
functions added to the exit chain with atterm so that they can be called
in a deterministic order and not whatever order the linker decides to put
them in.
- Fixed: DCajunMaster did not free its getspawned.
- Fixed: P_FreeLevelData() did not free ACS scripts.
- Fixed: Level snapshots were not freed at exit.
- Fixed: The save/load menu list was not freed at exit.
- Fixed: FCompressedMemFile needs a destructor to free the m_ImplodedBuffer.
- Fixed: G_DoLoadGame() did not free the engine string.
- Fixed: M_ReadSaveStrings() did not free the engine string.
- Fixed: Processing DEM_SAVEGAME did not free the pathname string.
- Added a check for truncated flats to FFlatTexture::MakeTexture() because
Heretic's F_SKY1 is only four bytes long.
- Added a dump of the offending state to the "Cannot find state..." diagnostic.
- Fixed: FCompressedFile did not initialize m_Mode in its default constructor.
- Fixed: Heretic and Hexen status bars did not initialize ArtiRefresh.
- Fixed: PNGHandle destructor should use delete[] to free TextChunks.
SVN r111 (trunk)
merge a lot of these static destructor-only structs into regular
functions added to the exit chain with atterm so that they can be called
in a deterministic order and not whatever order the linker decides to put
them in. (Interestingly, the amount of memory used when repeatedly
executing the same map command at the console varies up and down, but it
now stays relatively stable rather than increasing unbounded.)
- Fixed: The list of resolutions in the video modes menu was not freed
at exit.
- Fixed: mus_playing.name was not freed at exit.
- Fixed: SN_StopAllSequences() should be called at the start of
P_FreeLevelData(), not just before the call to P_SetupLevel() in
G_DoLoadLevel(), so it can run even at exit. And C_FullConsole() can
call P_FreeLevelData() to free more memory too.
- Fixed: StatusBar was not freed at exit.
- Fixed: spritesorter was not freed at exit.
- Fixed: Bad things happened if FString's data pool was destroyed before
all C_RemoveTabCommand() calls were made.
- Added an overload for FArchive << FString.
- Fixed: The players' log text was not freed at exit.
- Fixed: Bot information was not freed at exit.
- Fixed: doomcom was not freed at exit. But since it's always created,
there's no reason why it needs to be allocated from the heap. My guess
is that in the DOS days, the external packet driver was responsible for
allocating doomcom and passed its location with the -net parameter.
- Fixed: FBlockNodes were not freed at exit.
- Fixed: Openings were not freed at exit.
- Fixed: Drawsegs were not freed at exit.
- Fixed: Vissprites were not freed at exit.
- Fixed: Console command history was not freed at exit.
- Fixed: Visplanes were not freed at exit.
- Fixed: Call P_FreeLevelData() at exit.
- Fixed: Channel, SoundCurve, and PlayList in s_sound.cpp were not freed at
exit.
- Fixed: Sound sequences were not freed at exit.
- Fixed: DSeqNode::Serialize() did not resize the m_SequenceChoices array
when loading.
SVN r106 (trunk)
actually work.
- Turned the list of TabCommands into a TArray because I saw lots of console
commands in the memory leak report at exit. Then I realized those were actually
key bindings, so I changed the Bindings and DoubleBindings arrays into FString
arrays.
- Fixed: FStringCVar was missing a destructor.
- Added TArray::Insert().
- Fixed: TArray::Delete() used memmove().
- Renamed Malloc(), Realloc(), and Calloc() to M_Malloc(), M_Realloc(), and
M_Calloc() so that the debug versions can be defined as macros.
- Enabled the CRT's memory leak detection in WinMain().
- Moved contents of PO_DeInit() into P_FreeLevelData().
- Removed "PolyBlockMap = NULL;" from P_SetupLevel(), because the P_FreeLevelData()
call it makes next does the exact same thing, but also freeing it if needed.
- Fixed: Unneeded memcpy in UnpackUserCmd() when ucmd and basis are the same
SVN r75 (trunk)
its tiles are loaded from the same directory.
- RFF files now load their entire directories into the lumplist.
- Added char * and const char * type coversions for FString, so FStrings can be
freely passed to functions expecting C strings. (Except varargs functions,
which still require manually fetching the C string out of it.)
- Renamed the name class to FName.
- Renamed the string class to FString to emphasize that it is not std::string.
SVN r74 (trunk)
- Fixed: StreamSong::SetVolume should check the m_stream pointer. This can
happen when a TimiditySong doesn't use FMOD and outputs the sound itself.
- Fixed: 'use' sector actions were using the incorrect sector on several
occasions.
- Added a wi_noautostartmap CVAR and a noautostartmap intermission option
that force the user to manually end the 'entering level' page.
SVN r70 (trunk)
- Added multiple-choice sound sequences. These overcome one of the major
deficiences of the Hexen-inherited SNDSEQ system while still being Hexen
compatible: Custom door sounds can now use different opening and closing
sequences, for both normal and blazing speeds.
- Added a serializer for TArray.
- Added a countof macro to doomtype.h. See the1's blog to find out why
it's implemented the way it is.
<http://blogs.msdn.com/the1/articles/210011.aspx>
- Added a new method to FRandom for getting random numbers larger than 255,
which lets me:
- Fixed: SNDSEQ delayrand commands could delay for no more than 255 tics.
- Fixed: If you're going to have sector_t.SoundTarget, then they need to
be included in the pointer cleanup scans.
- Ported back newer name code from 2.1.
- Fixed: Using -warp with only one parameter in Doom and Heretic to
select a map on episode 1 no longer worked.
- New: Loading a multiplayer save now restores the players based on
their names rather than on their connection order. Using connection
order was sensible when -net was the only way to start a network game,
but with -host/-join, it's not so nice. Also, if there aren't enough
players in the save, then the extra players will be spawned normally,
so you can continue a saved game with more players than you started it
with.
- Added some new SNDSEQ commands to make it possible to define Heretic's
ambient sounds in SNDSEQ: volumerel, volumerand, slot, randomsequence,
delayonce, and restart. With these, it is basically possible to obsolete
all of the $ambient SNDINFO commands.
- Fixed: Sound sequences would only execute one command each time they were
ticked.
- Fixed: No bounds checking was done on the volume sound sequences played at.
- Fixed: The tic parameter to playloop was useless and caused it to
act like a redundant playrepeat. I have removed all the logic that
caused playloop to play repeating sounds, and now it acts like an
infinite sequence of play/delay commands until the sequence is
stopped.
- Fixed: Sound sequences were ticked every frame, not every tic, so all
the delay commands were timed incorrectly and varied depending on your
framerate. Since this is useful for restarting looping sounds that got
cut off, I have not changed this. Instead, the delay commands now
record the tic when execution should resume, not the number of tics
left to delay.
SVN r57 (trunk)
- Changed: Decal scales now use full precision fixed point numbers.
- Changed: Keeping impact decals in their own statlist is enough to keep track
of them for when one needs to be destroyed. There's no need to maintain a
separate list for them.
- Fixed: Decal actors did not spread their decals across neighboring walls.
- Fixed: Decal groups did not initialize their IDs and could not be reliably
used with the decal actor.
- Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal()
now uses the decal's LeftDistance to calculate its visible location, so it
always stays in sync with the wall's vertices. This also lets me dump some
code from the polyobjects that maintained the decals' (x, y) coordinates.
Also, the decals' x and y information is redundant and can be removed.
Doing this revealed a bug with slider decals and horizontal sliding:
That is, it didn't work at all. I have opted to simply remove the horizontal
sliding support so that I don't have to worry about what happens when a
decal slides across the edge of a wall.
- Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number.
It should be 2.30 fixed point.
SVN r35 (trunk)
