SPF_NOTIMEFREEZE processes particles with this flag regardless of time freeze. The endsize parameter changes the scale of the particle to that size throughout its lifetime linearly.
- Source is the actor to blame for the cause of damage (monster infighting for example). For missiles, modders should consider setting to AAPTR_TARGET.
- Inflictor is the actor doing the damage itself. Note that by changing this, it will take into account the flags on the pointed actor.
- Places the weapon offset by the defined x and y. Both are floats. This stacks with weapon bobbing.
- WOF_KEEPX: Don't change the X offset.
- WOF_KEEPY: Don't change the Y offset.
- WOF_ADD: Add onto instead of replacing the coordinates.
- float GetZAt(x, y, angle, flags, pick_pointer);
- Gets the floor z at x distance ahead and y distance to the side in relative form from the calling actor pointer. Flags are as follows (GZF_ prefix):
- CEILING: Returns the ceiling z instead of floor.
- ABSOLUTEPOS: x and y are absolute positions.
- ABSOLUTEANG: angle parameter does not add the pointer's angle to the angle parameter.
- FLATSPRITE: An actor becomes flat as if they were a decal on the floor.
- PITCHFLATSPRITE: A flat sprite tilts up and down based on pitch.
- WALLSPRITE: Similar to a Y billboarded sprite. The degree of the flattening is determined by the FlatAngle property.
- ROLLSPRITE: The sprite of the actor is affected by the Roll property.
Since decals may have thinkers attached this will crash when such a savegame gets loaded, because the thinker lists get reset in P_SerializeThinkers, deleting any thinker that already was processed.
I also added an error message that immediately aborts the save process if such an out-of-sequence thinker is attempted to be written out.
This obviously breaks savegame compatibility again...
The scripting branch changed camera semantics to default to an actor's center - which for monsters and decorations makes sense - but not for simple mapspots that get used as camera. For those the CameraHeight must be explicitly set to 0.
ZDoom defaulted to Boom's (buggy) angle adjustment.
Changed it so that
* Mode 0 is like Hexen, performing no adjustment at all. This still should match all known maps using this special.
* Mode 1 remains unchanged.
* Mode 2 replicates Boom's broken angle adjustment and is used in the xlat file.
* Mode 3 implements the correct angle adjustment that Boom originally intended.
(Note: Should some map require something different it should be handled with compatibility.txt instead of reverting this back to the broken way it was before.)
- This reverts commit 06216d733e.
- I don't know what I was thinking. Since stateowner is always available
to the wrapper function, and this code is only generated for the wrapper
function, it's a nonissue. The state is already located before calling
any function that uses it.
- This reverts commit 39df62b20e.
- Anything that needs to lookup a state also needs stateowner. See
FxMultiNameState::Emit(). I will need to be more selective when
de-actionifying functions.
- An actor function really only needs to be an action function if:
1. It can be called with no parameters specified, either because it takes
none or because all its parameters are optional. This lets SetState()
call it directly without creating a wrapper function for it.
2. It wants access to the callingstate or stateowner parameters. Most
functions don't care about them, so passing them is superfluous.
- Includes 2 flags, affixed by CBF_: AbsolutePos, and AbsoluteAngle.
- AbsolutePos: Absolute position of where to check.
- AbsoluteAngle: Angle parameter is used as is, not added onto the actor's current angle.
* Added falloff parameter to A_QuakeEx.
- Treated just like A_Explode's 'fullradiusdamage' parameter, where the quake will fall off from this distance on out to the edge. Default is 0, which means no falloff.
- Credits to MaxED and Michaelis for helping.
* - Added HighPoint parameter to QuakeEx.
- Allows fine tuning of where the quake's maximum or minimum occurs, in tics. This must be a range between [1, duration).
- For up or down scaling quakes, this sets the quake to reach maximum sooner or start minimizing later.
- For both, this indicates when the strongest will occur. Default is 0, or in the middle.
The original commits were nearly impossible to find in the convoluted commit tree, so I think it's preferable to have one clean commit instead.
- Converted P_MovePlayer and all associated variables to floating point because this wasn't working well with a mixture between float and fixed.
Like the angle commit this has just been patched up to compile, the bulk of work is yet to be done.
- This is an effort to emphasize that these are just type casts. Now they
look like function-style casts with no action function styling.
They do no magic joojoo at all. The only reason they exist is because
the DECORATE parser can only parse return statements that call a
function, so these satisfy that requirement. i.e. *return int(666);* is
identical to *return 666;* (if the parser could handle the latter).
- Since DECORATE's return statement can only return the results of
function calls (I do not want to spend the time necessary to make it
return arbitrary expressions), here are three functions to get around
this limitation:
* A_State - Returns the state passed to it. You can simulate A_Jump
functions with this.
* A_Int - Returns the int passed to it.
* A_Bool - Returns the bool passed to it.
- e.g. If you want to return the number 3, you use this:
return A_Int(3);
If you want to jump to a different state, you use this:
return A_State("SomeState");
- The A_Jump family of action functions now return the state to jump
to (NULL if no jump is to be taken) instead of jumping directly.
It is the caller's responsibility to handle the jump. This will
make it possible to use their results in if statements and
do something other than jump.
- DECORATE return statements can now return the result of a function
(but not any random expression--it must be a function call). To
make a jump happen from inside a multi-action block, you must
return the value of an A_Jump function. e.g.:
{ return A_Jump(128, "SomeState"); }
- The VMFunction class now contains its prototype instead of storing
it at a higher level in PFunction. This is so that
FState::CallAction can easily tell if a function returns a state.
- Removed the FxTailable class because with explicit return
statements, it's not useful anymore.
* set up linked sector portals so that everything that will eventually have to be considered is present, even though the software renderer currently can't handle those adequately.
* tag all skybox things with a type so that they can easily be distinguished at run time.
* fill in the linked portal types in xlat/eternity.txt.
- having a value of 5000 as the default for autoaim makes no sense, since this is an angle value that will always be clamped to [0..35]. So now 35 is both the default and the maximum.
- SPF_FULLBRIGHT makes the particle full bright.
- SPF_RELATIVE encapsulates the following flags:
- SPF_RELPOS: Position is relative to angle.
- SPF_RELVEL: Velocity is relative to angle.
- SPF_RELACCEL: Acceleration is relative to angle.
- SPF_RELANG: Add caller's angle to angle parameter for relativity.
Updated version of Return to Hadron (dated 2016.01.03) has new version of E1M9: Prototype
This map requires vanilla's P_PointOnLineSide() function to avoid issue with sleepy shotgun guys
http://forum.zdoom.org/viewtopic.php?t=49544
- CHF_STOPIFBLOCKED simply prevents the actor from changing directions for movement.
- CHF_DONTTURN implies NORANDOMTURN, NOPOSTATTACKTURN and STOPIFBLOCKED.
- CHF_NORANDOMTURN: Actor will not randomly turn during chasing to pursue its target. It will only turn if it cannot keep moving forward.
- CHF_DONTANGLE: Actor does not adjust its angle to match the movement direction.
- CHF_NOPOSTATTACKTURN: Actor will not make its first turn after exiting its attacks.
- NODISTANCE: Disables distance checking.
- CHECKSIGHT: The qualifying actor must be in sight in order to count.
- SET<TARGET/MASTER/TRACER>: Gets the first qualifying actor and sets the calling actor's specified pointer to it.
- SETONPTR: If the function is being aimed at another actor other than the caller, sets that actor's pointers instead. Requires a SET* flag to work.
- FARTHEST: The actor farthest from the checking actor is set as the pointer. Requires a SET* flag to work.
- CLOSEST: The closest qualifying actor is set as the pointer. Requires a SET* flag to work.
- fixed: Sector_SetPortal's Eternity translation was not correct.
The ZDoom variant allows specifying the plane as part of the portal, Eternity does not. Added a new 'plane' type 3 which just means 'any'.
- Checks to see if a certain actor class, in numbers, is close to the actor/pointer via distance, based upon count. Can check for ancestry, disable Z searching, perform less than or equal to instead of greater or equal to, exact counts, check a pointer instead of itself and differentiate between live monsters and dead.
As a side effect this will now allow using custom messages with this function as well by using the arg2 parameter as part of the message's name (arg2=0 will use TXT_COMM0, arg1 TXT_COMM1 and so on.)
- Now includes anglelimit and pitchlimit.
- Anglelimit and pitchlimit only allows the actor to turn this much, similar to A_FaceTarget's limit. FVF_RESETPITCH also respects the pitch limit.
- (offset, anglelimit, pitchlimit, flags, ptr)
- Changes the caller's angle and pitch according to the direction of velocity they're travelling.
- FVF_NOPITCH and FVF_NOANGLE disable changing of pitch/angle respectively and should be counted as mutually exclusive, or the function does nothing.
- FVF_INTERPOLATE - Interpolate's the angle and pitch changes.
- FVF_RESETPITCH will, if there's no z velocity, reset the pitch to 0. Otherwise, the pitch remains unchanged.
- Added 'threshold' and 'defthreshold' to DECORATE expression exposure.
- ChaseThreshold sets the default threshold for how long a monster must chase one target before it can switch targets. Default is 100, must not be negative.
- A_SetChaseThreshold can be used to alter the current or default threshold of an actor <pointer>.
- Changing current threshold has no effect on what the default will be once it hits 0 and something makes it infight with another.
- Performs a jump if an actor or a line is in the way.
- Can be used without a jump state if the desire is only to have a pointer change.
- CBF_NOLINES disables jumping if a line is involved.
- CBF_SET* flags set the target, master or tracer to whoever is blocking, for the actor calling the function.
- CBF_SETONPTR causes the pointer changing flags to apply to the pointed actor instead of itself.
- RadiusOffset is a multiplier of the target actor's radius added onto the offsets x and y.
- Pitch is added to the warping actor's current pitch, provided WARPF_USEPITCH is supplied.
- Fixed WARPF_TOFLOOR not working as intended.
- Actors must be this far away to receive items. Mindist must be less than distance.
- Fixed RGF_OBJECTS not discriminating players and monsters from shootable or vulnerable actors.
This was implemented by adding a new inventory flag INVENTORY.NOTELEPORTFREEZE so that the effect can both be activated for other items and deactivated for the two that currently have it.
- WARPF_ADDHEIGHT adds the pointed actor's height to heightoffset, and adds to the pointed actor's z position.
- WARPF_MULHEIGHT multiplies the pointed actor's height by heightoffset, and adds to the pointed actor's z position. Overridden by ADDHEIGHT.
- Added filter and species parameter.
- Added new flags: RGF_INCLUSIVE, RGF_ITEMS, RGF_KILLED, RGF_EXFILTER, RGF_EXSPECIES, and RGF_EITHER.
- RGF_ITEMS: Items can receive inventory.
- RGF_KILLED: Actors who are truly dead might not be corpses, and vice versa.
- RGF_EXFILTER: Blacklists the specified actor filter. All but the filtered actor can receive the item.
- RGF_EXSPECIES: Blacklists the specified species. All but the filtered species can receive the item.
- RGF_EITHER: The actor can receive the item if it satisfies either the filter or the species. Only useful when both are used.
- RGF_INCLUSIVE: An actor marked as more than one pointer to the calling actor can ignore the exclusion pointers, but only if at least one is missing. I.e. an actor who is a target and tracer of the calling actor can still receive the item, if the calling actor doesn't pass RGF_NOTARGET and NOTRACER at the same time. RGF_INCLUSIVE only works with the pointer filtering flags. By default, if not specified, the actor will not be loopholed the item if they are under any one of the three filters.
- Fixed discrepancies and dependencies upon several flags and actor conditions which caused the function to fail.
- Fixed: Artiflash played on initial save loading. I seem to recall this looking like an intentional change, but perhaps I broke it since it's completely pointless to play the animation only on the first load of a save game if nothing has been loaded beforehand.
- Overrides the NOTELEPORT flag so actors with velocity don't need to disable it in order to perform A_Teleport, which could be screwed up by a teleporting line or sudden ACS interference.
- Ensure that the result is set to false if it fails prematurely. Wasn't sure if this was needed, but with the upcoming if/else statements, better safe than sorry.
- (int ptr = AAPTR_TARGET, state high, state low, float offsethigh = 0, float offsetlow = 0, bool includeHeight = true)
- Jumps if the pointer of the calling actor is higher or lower than itself, adding offsethigh or offsetlow depending on the circumstance.
- includeHeight works twofold.
- Includes the height of the calling actor if the pointer is higher to truly determine if they are completely above them or not.
- Includes the height of the pointer if the pointer is lower.
- Disable it to only check z differences without adding height.
Conflicts:
src/dobjtype.cpp
src/p_conversation.cpp
src/p_local.h
src/p_things.cpp
src/thingdef/thingdef_properties.cpp
(This is just the conversationID to MAPINFO stuff to keep the conflicts as small as possible)
Conflicts:
src/p_mobj.cpp
(This stops right before moving the conversation IDs into MAPINFO because that feature is quite conflict-heavy and will have to merged by itself.)
Conflicts:
src/d_main.cpp
src/info.cpp
src/p_local.h
(Had to merge this all by itself because it was creating too many merge conflicts when combined with other stuff.
* added global functions that check whether FMod and OpenAL are present, without initializing the sound backend.
* make sound init code more fault tolerant. It will now try to switch between FMod and OpenAL if the currently active one cannot be found but the other one can.
* added 'ifoption' checks for sound backend to menu code.
* only show sound backends which are present and hide the options for the ones which are not.
- OpenAL never actualy worked properly and was removed in later FMODs.
- Sound Manager was deprecated by Apple long ago and is not supported for
64-bit applications. It was also removed in later FMODs.
- Fixed: P_MoveThing had source and destination fog spawning backwards.
- Fixed a case where the NOTELEPORT flag would be ignored on A_Teleport.
- Added pointer selection to A_Teleport. Defaults to AAPTR_DEFAULT (calling actor). State jumps will only be done by the calling actor.
Both 'Adventures of Square' IWADs were missing an entry for base MAPINFO and as a result did not define the common editor numbers.
To prevent this, a new mindefaults MAPINFO was added to zdoom.pk3 which now gets loaded if IWADINFO does not specify a game-specific file.
This minimum setting sets all gamedefaults to a reasonable base value and defines all other things that are required to be defined.
