The output system's update_input takes a parameter specifying the render
step from which it is to get the output view of that step and updates
its descriptors as necessary.
With this, the full render job is working for alias models (minus a few
glitches).
When creating a new command buffer and appending it to a queue, the
active buffer count needs to be incremented too otherwise the new
command buffer will be accidentally reused prematurely. Not noticed
earlier because only one buffer was being created.
Many thanks to Peter and Darian for clearing up my misunderstanding of
how vkResetCommandPool works. The manager creates command buffers from
the command pool on an as-needed basis (when the queue of available
buffers is empty), and keeps track of those buffers in a queue. When the
pool is reset, the queues (one each for primary and secondary command
buffers) are reset such that the tracked buffers are available again.
Imageless framebuffers would probably be easier and cleaner, but this
takes care of the validation error attempting to present the second
frame (because rendering was being done to the first frame's swapchain
image instead of the second frame's).
Command buffer pools can't be reset until the commands have all been
executed. Having per-frame pools makes keeping track of pool lifetime
fairly easy.
Interleaving Vulkan objects with stucts containing vec4f_t results in
the vectors becoming unaligned when there is an odd number of objects in
a set, thus producing a segfault. Putting all the structs first prevents
any such issue.
The new render system now passes validation for the first frame (but
no drawing is done by the various subsystems yet). Something is wrong
with how swap chain semaphores are handled thus the second frame fails.
Frame buffer attachments can now be defined externally, with
"$swapchain" supported for now (in which case, the swap chain defines
the size of the frame buffer).
Also, render pass render areas and pipeline viewport and scissor rects
are updated when necessary.
I don't like the current name (update_framebuffer), but if the
referenced render pass doesn't have a framebuffer, one is created. The
renderpass is referenced via the active renderpass of the named render
step. Unfortunately, this has uncovered a bug in the setup of renderpass
objects: main.deferred has output's renderpass, and main.deferred_cube
and output have bogus renderpass objects.
Being able to specify the types in the push constant ranges makes it a
lot easier to get the specification correct. I never did like having to
do the offsets and sizes by hand as it was quite error prone. Right now,
float, int, uint, vec3, vec4 and mat4 are supported, and adheres to
layout std430.
This allows the likes of:
qfv_pushconstantrangeinfo_s = {
.name = qfv_pushconstantrangeinfo_t;
.type = (QFDictionary);
.dictionary = {
.parse = {
type = (labeledarray, qfv_pushconstantinfo_t, name);
size = num_pushconstants;
values = pushconstants;
};
stageFlags = $name.auto;
};
stageFlags = auto;
};
Leading to:
pushConstants = {
vertex = { Model = mat4; blend = float; };
fragment = { colors = uint; base_color = vec4; fog = vec4; };
};
Where the label of the labeled array (which pushConstants is) is
actually an enum flag and the dictionary value is another labeled array.
The up-coming changes to push constant handling has qfv_float etc type
enum values and using "float" instead of "qfv_float" is highly desirable
as the names match the glsl type names.
The creation of the render jobs doesn't really belong with the running
of those jobs. This makes the code a little easier to navigate as it was
too easy to lost between load-time and run-time code.
This is with the new render job scheme. I very much doubt it actually
works (can't start testing until everything passes, and it's disabled
for the moment (define in vid_render_vulkan.c)), but it's helping iron
out what more is needed in the render system.
I never liked it, but with C2x coming out, it's best to handle bools
properly. I haven't gone through all the uses of int as bool (I'll leave
that for fixing when I encounter them), but this gets QF working with
both c2x (really, gnu2x because of raw strings).
I never liked the various hacks I had come up with for representing
resource handles in Ruamoko. Structs with an int were awkward to test,
pointers and ints could be modified, etc etc. The new @handle keyword (@
used to keep handle free for use) works just like struct, union and
enum in syntax, but creates an opaque type suitable for a 32-bit handle.
The backing type is a function so v6 progs can use it without (all the
necessary opcodes exist) and no modifications were needed for
type-checking in binary expressions, but only assignment and comparisons
are supported, and (of course) nil. Tested using cbuf_t and QFile: seems
to work as desired.
I had considered 64-bit handles, but really, if more than 4G resource
objects are needed, I'm not sure QF can handle the game. However, that
limit is per resource manager, not total.
Really, a bit more than stub as the basic code is there, but nothing
works properly yet due to missing resources (especially descriptor sets
and pools), and the frame buffer creation is still disabled.
The step dependencies are not handled yet as threading isn't used at
this stage, but since I'll require dependencies to always come earlier,
this shouldn't cause a problem.
I had somehow missed vkfieldignore in a consistency pass, or just messed
up its initialization (and thus deallocation) resulting in a double-free
of the strings.
This fixes a Sys_Error when loading the level for the first demo (and
probably many other times). It was mod_numknown getting set to 0 that
triggered the issue, but that seems to be necessary for the other
renderers. I think the whole model loading and caching system needs an
overhaul as this doesn't feel quite right due to removing part of the
advantage of caching the model data.
While the previous cleanup took care of the C side, it turns out vkgen
was leaking property list items all over the place, but they were
cleaned up by the shutdown code.
The jobs will become the core of the renderer, with each job step being
one of a render pass, compute pass, or processor (CPU-only) task. The
steps support dependencies, which will allow for threading the system in
the future.
Currently, just the structures, parse support, and prototype job
specification (render.plist) have been implemented. No conversion to
working data is done yet, and many things, in particular resources, will
need to be reworked, but this gets the basic design in.
Flushing memory requires nonCoherentAtomSize alignment, but this can
cause the flush range to go out of bounds of an improperly sized buffer.
However, only host-visible (and probably really only cached, but all
three covered) needs flushing, so no rounding up is done for
device-local memory.
It should have been this way all along, and it seems I thought they were
when I did rua_gui.c as it already freed its resource block, which would
have been a double free (oops). Fixes an invalid write when shutting
down progs in qwaq-cmd (relevant change not committed).
Render passes and subpasses are now mostly initialized, just command
buffers and frame buffer related info to go (including view/scissor for
pipelines).
Due to a typo in the list of extra property list items to add to the
symbol table (corrected), subsequent symbols were pointing to the wrong
memory address.
Not only does this quieten the validation layers, it ensures that all
the object handles are named and where they need to be. Also fixes only
one pipeline being created instead of the 15 or so.
It turns out labeled arrays don't work if structs aren't declared in the
right order (no idea what that is, though) as the struct might not have
been processed when the labeled array field is initialized. Thus, do a
pro-processing pass to set up any parse data prior to writing the
tables.
Most importantly, this cleans up creation of self-referencing symbol
tables from property lists, but adds in C-defined symbols as well. While
QFV_ParseRenderInfo is currently the only the function that uses it, it
might be helpful in the future, especially as I clean up the other parse
support code.
The render passes seem to be created successfully, but pipelines fail
due to not having layout set, resulting in a segfault (bug in validation
layers?).
I don't remember why I kept the abbreviated configs for images and image
views, but it because such that I need to be able to specify them
completely. In addition, image views support external images.
The rest was just cleaning up after the changes to qfv_resobj_t.
Vulkan requires color blend state is only for color attachments (ignored
otherwise), but it shouldn't be necessary to actually specify the blend
state and instead have it default to something reasonable.
Unfortunately, colorWriteMask affects the output even if blending is
disabled, so it must be initialized to something reasonable (r|g|b|a)
for when the default is used.
.dictionary can ask for standard parsing via a .parse key (value is
ignored currently).
Fields can use $auto to use standard parsing for that field.
If either is used, the plist field descriptors are written.
They're currently just stubs, but this gets the render info loading
working without any errors. The next step is to connect up pipelines and
create the image resources, then implementing the task functions will
have meaning.
This gets an empty (no tasks or pipelines connected) render context
initialized and available for other subsystems to register their task
functions. Nothing is using it yet, but the test parse of rp_main_def
fails gracefully (needs those tasks).
This just sets up the memory block and cexpr descriptors for the
parameters, parameter parsing is separate (and next). The parameters are
aligned to their size.
Needed to add the render passes plitem to the cexr symbol table, too.
All that remains is to figure out how to deal with multiview (or really
@next) and get task parsing working.
A bunch of missed struct members, incorrect parse types, and some logic
errors in the parse setup. Still not working due to problems with
vectors from plist string references and some other errors, but getting
there.
This is most useful when parsing a labeled array where the key/value
pairs go into a simple array:
key = value;
going to:
struct foo {
const char *key;
enumtype value;
};
This treats dictionary items as arrays ordered by key creation (ie, the
order of the key/value pairs in the dictionary is preserved). The label
is written to the specified field when parsing the struct. Both actual
arrays and single element "arrays" are supported.
This allows having sections in a spec used for things like `properties`
that have no corresponding fields in the actual struct: the field is
ignored when parsing and no cexpr field symbol is emitted.
There's still a lot of work to do, but the basics are in. The spec will
be parsed into info structs that can then be further processed to
generate all the actual structs, generally making things a little less
timing dependent (eg, image view info refers to its image by name).
The new render pass and subpass structs have their names mangled for now
until I can switch over to the new system.
Ruamoko currently doesn't support `const`, so that's not relevant, but
recognizing `char *` (via a hack to work around what looks like a bug
with type aliasing) allows strings to be handled without having to use a
custom parser. Things are still a little clunky for custom parsers, but
this seems to be a good start.
Using the typedef name makes using structs declared as
typedef struct foo_s { ... } foo_t;
easier and cleaner. Sure, I could have written the "struct foo_s" for
the output name, but I'm much more likely to look for foo_t than foo_s
when checking the generated code.
While the old system did get things going, it felt clunky to set up,
especially when it came to variations on render passes (eg, flat vs
cube-mapped). Also, much of it felt inside-out, especially the
separation of pipelines and render passes: having to specify the render
pass and subpass in the pipeline spec made the spec feel overly coupled
to the render pass setup. While this is the case in Vulkan, it is not
reflected properly in the pipeline spec. The new system will adjust the
render pass and subpass parameters of the pipeline spec as needed,
making the pipeline specs more reusable, and hopefully less error prone
as the pipelines are directly referenced by the subpasses that use them.
In addition, subpass dependencies should be much easier to set up as
only the dependent subpass specifies the dependency and the subpass
source dependency is mentioned by name. Frame buffer attachments also
get a similar treatment.
The new spec "format" isn't quite finalized (needs to meet the enemy
known as parsing) but it feels like a good starting place.
I suspect this is a hold-over from before the bsp thread safety changes,
but with the nicely separated queues, it's easy to pass the sky surfaces
through the depth pass as well as the translucency pass (I think the
reason for that is lighting). This prevents bits of world being seen
through sky surfaces when the sky isn't fully opaque (like skysheet due
to the shortcuts in the shader).
Partial because frame buffer creation isn't handled yet (using six
layers), but using layer a layer capable view and shaders doesn't cause
problems (other than maybe slightly slower code).
It turns out that my laptop doesn't do multiview properly (or I've
misconfigured something, later), but the biggest issue I had on my
desktop seems to be that I had the push constants wrong: fov in aspect,
time in fov, and I had degrees instead of radians (half angle) anyway.
There are some missing parts from this commit as these are the fairly
clean changes. Missing is building a separate set of pipelines for the
new render pass (might be able to get away from that), OIT heads texture
is flat rather than an array, view matrices aren't set up, and the
fisheye renderer isn't hooked up to the output pass (code exists but is
messy). However, with the missing parts included, testing shows things
mostly working: the cube map is rendered correctly even though it's not
displayed correctly (incorrect view). This has definitely proven to be a
good test for Vulkan's multiview feature (very nice).
Some of the queues start don't get fully initialized, but rather than go
through everything making sure they do, it's just easier to zero the
whole lot at the beginning.
The flashing pink around the Q menu cursor was caused by vulkan command
buffer writes and draw queue population being out of phase, which was
fixed by the recent screen update changes (specifically,
42441e87d4).
Rather important for debugging 2d stuff (draw's lines are 2d-only).
Other than translucent console, this gets the vulkan draw api back to
full operation.
This needed either more font ids to be supported, or small lump pics (up
to 32 x 32) to be loaded into the atlas. I went with both. The menus
don't use Draw_TextBox, but quakeworld's netgraph does.
This makes use of slice rendering to achieve the effective scaling, but
the slice data is created only when needed so pics that never use slices
don't waste 16 vertices.
The goal is to get vulkan relying on the "renderpass" abstraction, but
this gets vulkan up and running again, and even fixes the rendering
issues (in the end, getting canvas working wasn't required, but is still
planned).
This is a bit of a hack to allow me to work on vulkan's screen update
"pipeline" without having to mess with the other renderers, since it
turns out they're (currently) fundamentally incompatible.
When a pic needs dynamic vertices (eg, for sub-pics), a descriptor set
is allocated and updated if one has not been created for the pic. This
is done each frame: the descriptor sets are recycled (there currently is
rarely a need for more than a small handful of dynamic descriptors, so
64 should be plenty for now).
Unfortunately, due to the order of operations issue between draw items
getting queued and submitting commands to vulkan (the cause of the pics
not rendering correctly per 8fff71ed4b),
the validation layers complain (correctly) about the command buffers
being executed with updated descriptor sets. Getting the canvas system
up and running will fix that.
The pic is scaled to fill the specified rect (then clipped to the
screen (effectively)). Done just for the console background for now, but
it will be used for slice-pics as well.
Not implemented for vulkan yet as I'm still thinking about the
descriptor management needed for the instanced rendering.
Making the conback rendering conditional gave an approximately 3% speed
boost to glsl with the GL stub (~12200fps to ~12550fps), for either
conback render method.
This fixes the broken dynamic lighting in fisheye rendering. It does
mean that frustum culling of lit surfaces needed to be removed, but if
not doing frustum culling on lit surfaces was good enough for a P90,
it's probably good enough for an i7-6850K.
They are usually larger images (eg, the main menu graphic) and thus make
a mess of the atlas (thus, making them separate means a smaller atlas
can be used). All sorts of things are in a mess (descriptor management,
subpic rendering not supported, wrong alpha value for the transparent
pixel), but this gets the basic loader going.
This just takes advantage of the dynamic verts for doing subpics. It's
not really the most optimal code as it has to write both the vertices
(64 bytes per quad) and the instances (24 bytes per quad), but that's
still better than the old 128 bytes per quad (and having a single
pipeline is nice).
The problem was that I had mixed up the purpose of the per-frame vertex
buffers and used them for the core quad data when they were meant for
subpic and the like, and forgotten about the static vertex buffer.
This gets at least conchars working (pic in general not tested yet).
Any performance gains will be utterly swamped by the deferred renderer,
but it will allow better control of quad render order by any client
code (and should be slightly better for simpler renderers when I get
support for them working).
Right now, plenty is broken (much of the higher level draw functions are
disabled, and pics don't render correctly), but this gets at least the
basics in so I'm not bouncing diffs around as much.
It turns out the slice pipeline is compatible with the glyph pipeline in
that its vertex attribute data is a superset (just the addition of the
offset attributes). While the queues have yet to be merged, this will
eventually get glyphs, sliced sprites, and general (static) quads into
the one pipeline. Although this is slightly slower for glyph rendering
(due to the need to pass an extra 8 bytes per glyph), this should be
faster for quad rendering (when done) as it will be 24 bytes per quad
instead of 32 bytes per vertex (ie, 128 bytes per quad), but this does
serve as a proof of concept for doing quads, glyphs and sprites in the
one pipeline.
The main reason I had created in the first place was I hadn't thought of
using image view swizzles to handle coverage-alpha textures (for
monochrome glyphs), and for whatever reason also had the texture in a
different binding slot to the twod fragment shader. With both issues out
of the way, there's no reason to have an almost identical (just some
naming) shader just for glyphs.
With an eye towards merging the 2d pipelines as much as possible, I
found that the glyph and basic 2d quad texture descriptors were in
different slots for no reason I can think of. Having them in the same
slot would mean I could use the same fragment shader for all 2d
pipelines (though the plan is to get it down to two: (sliced) quads and
lines).
I hadn't noticed the problem until playing with early fragment tests for
the sprite fragment shaders, but passing data that expects triangle
strips to a pipeline that expects triangle lists doesn't work too well
when drawing quads.
Marking them as cached means that they'll be "uncached" instead of
destroyed when freed, which would not be a particularly good thing. I
have no memory as to how I found this as I found the change in my git
stash.
While Draw_Glyph does draw only one glyph at a time, it doesn't shape
the text every time, so is a major win for performance (especially
coupled with pre-shaped text).
And add a function to process a passage into a set of views with glyphs.
The views can be flowed: they have flow gravity and their sizes set to
contain all the glyphs within each view (nominally, words). Nothing is
tested yet, and font rendering is currently broken completely.
Font and text handling is very much part of user interface and at least
partially independent of rendering, but does fit it better with GUI than
genera UI (ie, both graphics and text mode), thus libQFgui as well as
libQFui are built in the ui directory.
The existing font related builtins have been moved into the ruamoko
client library.
I had done the loader for the GPU renderers, so the CPU renderer didn't
draw the characters transparently. Fixes the pink block in my ruamoko
test scene (due to the notify text area).
While it doesn't really make any difference to the texture upload (8-bit
is 8-bit), and the sampler is in control of the interpretation, this
makes vulkan more consistent with the specification of the glyph
texture.
