Most often, this had happened when casting comparison functions for qsort()
like these: "int yax_cmpbunches(const int16_t *b1, const int16_t *b2)"
to a function pointer type expecting "const void *". Alas, this is undefined
behavior: see
http://blog.frama-c.com/index.php?post/2013/08/24/Function-pointers-in-C
and posts linked from it.
At least two cases have not been fixed:
- The savegame system maintains pointers which are either to data or a function in
the generic "void *". This ought to be made into a union.
- Probably also:
#define OSD_ALIAS (int32_t (*)(const osdfuncparm_t*))0x1337
git-svn-id: https://svn.eduke32.com/eduke32@4068 1a8010ca-5511-0410-912e-c29ae57300e0
- Currently: only tvlineasm1 and tvlineasm2, but incomplete (no reverse
translucency, nonpow2 textures will crash)
- For System V AMD64 calling conventions; requires YASM
git-svn-id: https://svn.eduke32.com/eduke32@4066 1a8010ca-5511-0410-912e-c29ae57300e0
This reverts commit c7e51147f1869d42fc8365f748bb8f6bd4c6fc2f. [r3835]
Conflicts:
eduke32/build/src/defs.c
[Dunno what caused this, but I cleaned this out. Also, the change from
build.c was not reverted.]
git-svn-id: https://svn.eduke32.com/eduke32@4061 1a8010ca-5511-0410-912e-c29ae57300e0
This reduces the proportion of time the trig calculations take of the whole
preprocessing from 50% to about 13%.
git-svn-id: https://svn.eduke32.com/eduke32@4060 1a8010ca-5511-0410-912e-c29ae57300e0
The offsets (that will translate the axes for .pitch/.roll rotation) were
calculated improperly with screen sizes other than 1280 x 1024 and were
dependent on other related variables. The fix proceeded empirically, i.e. mostly
trial, error, and some educated guesswork. (It's telling that the magic constant
1280 is needed.) A test for Lunatic is added to test.lua that will rotate
SEENINES.
Bug pointed out by Mblackwell.
git-svn-id: https://svn.eduke32.com/eduke32@4058 1a8010ca-5511-0410-912e-c29ae57300e0
- engine.c: comment out some unused decls with RELEASE=0 DEBUGANYWAY=1
- Lunatic: update dump.lua and v.lua
- Lunatic: test/test_geom.lua: note a perf regression (wrt older LuaJIT,
or I mis-configured / built something wrong)
git-svn-id: https://svn.eduke32.com/eduke32@4048 1a8010ca-5511-0410-912e-c29ae57300e0
(Auto-insertion of an inner sector from a loop happens either because the loop
is created in an extended sector, or because it has been punched through a
ceiling/floor into the upper/lower neighbor sector.)
git-svn-id: https://svn.eduke32.com/eduke32@4033 1a8010ca-5511-0410-912e-c29ae57300e0
Note: the wall line will not light up periodically, but point insertion will
be possible nontheless. A bit inconsistent, but I didn't want to do a full
analysis of which side effects allowing a sprite highlight and a line highlight
to coexist at the same time would have.
git-svn-id: https://svn.eduke32.com/eduke32@4026 1a8010ca-5511-0410-912e-c29ae57300e0
This makes CLANG=1 RELEASE=0 DEBUGANYWAY=2 OPTLEVEL=1 builds definitely pretty
playable (only Polymost tested) while having a decent amount of sanitization.
git-svn-id: https://svn.eduke32.com/eduke32@4020 1a8010ca-5511-0410-912e-c29ae57300e0
Redundant for the same reason as the preceding one: the pointer has already
been dereferenced at the point the check is made. Also, all 5 calls of that
function pass a valid pointer (provided the pointers from which the expressions
are derived are valid). Reported by Stack, too.
git-svn-id: https://svn.eduke32.com/eduke32@4017 1a8010ca-5511-0410-912e-c29ae57300e0
Again, in case a bunch is discarded. The tags would appear as really tagging
the walls instead of being "hidden".
git-svn-id: https://svn.eduke32.com/eduke32@4012 1a8010ca-5511-0410-912e-c29ae57300e0
That is, if a bunch is discarded when copying a sector to the clipboard.
(This happens if not all sectors that are part of the bunch are copied.)
git-svn-id: https://svn.eduke32.com/eduke32@4011 1a8010ca-5511-0410-912e-c29ae57300e0
Don't touch TerminX's r_usetileshades==1 or it being the default.
git-svn-id: https://svn.eduke32.com/eduke32@4010 1a8010ca-5511-0410-912e-c29ae57300e0
- For setting 1, don't draw them for red walls whose sector floors have equal
height.
- Make setting 1 the default, because I consider drawing them for such walls
(and white walls) noise (as opposed to information). The "verbose" setting 2
is still available.
git-svn-id: https://svn.eduke32.com/eduke32@4007 1a8010ca-5511-0410-912e-c29ae57300e0
DONT_BUILD, because there have been no significant changes of the non-Lua build.
git-svn-id: https://svn.eduke32.com/eduke32@4006 1a8010ca-5511-0410-912e-c29ae57300e0
- libs and headers are expected in platform/Windows/* (not there yet)
- prefix Lua #includes with luajit-2.0/
- build bytecode objects with absolute path name (used for debug info)
git-svn-id: https://svn.eduke32.com/eduke32@4000 1a8010ca-5511-0410-912e-c29ae57300e0
- Use the proper tile sequence when multiple pskies are present in a map.
However, there's still only *one* psky chosen at map load time.
- Handle three horizfrac cases:
* 0, psky always at same level wrt screen
* 65536, psky horiz follows camera horiz (e.g. E4L9)
* otherwise, fall back to default hard-coded parallax implemented as an
angle fraction
git-svn-id: https://svn.eduke32.com/eduke32@3977 1a8010ca-5511-0410-912e-c29ae57300e0
- Rename sky_t members: yscale -> horizfrac, bits -> lognumtiles.
- Add default sky (8 tiles, horizfrac=32768 (i.e. 1/2 the scene horiz), offsets
all zero) and CLOUDYOCEAN sky (8 tiles, horizfrac=65536, offsets all zero)
to multipsky[].
- Get rid of "psky_t g_psky", merely maintaining a g_pskyidx instead. Set it up
at map load time so as to keep the behavior of the legacy per-map psky:
the last sector index with a matching psky ceiling wins.
- In mapstate_t, save g_pskyidx too, not (former) pskybits and pskyoffs[].
- Make on-map-load global psky setup consistent for the game and editor by
factoring it out into common.c: G_SetupGlobalPsky().
- Remove a couple of useless initializations, add some static assertions.
This commit is more likely to introduce subtle differences in behavior.
Specifically, getpsky() now always returns the default sky properties instead of
the global sky ones (but with all-zero offsets) when no match for a suiting
multi-psky is found. This is only likely to affect the yscale/horizfrac of
non-multi-pskies when a global non-default multi-psky has been set up.
Bump BYTEVERSION again.
git-svn-id: https://svn.eduke32.com/eduke32@3976 1a8010ca-5511-0410-912e-c29ae57300e0
- Consolidate psky* arrays into a "typedef struct psky_t" "g_psky" and
"multipsky[]".
- Factor out getting parallaxed sky properties into getpsky().
- Condense initial multi-psky setup by memcpy'ing from multipsky[].
- New function: MultiPsky_TileToIdx().
- Add new define PSKYOFF_MAX and related consistency-checking assertions.
- Lower MAXPSKYTILES to 8 to reflect current usage (was 256).
- Game: make multi-pskies consider dynamically-remapped MOONSKY1, BIGORBIT1
and LA. (Not very useful as the editor will still only act for the static
values -- 80, 84 and 89, respectively.)
An attempt has been made to preserve behavior even in strange cases, so this
commit is unlikely to introduce regressions. Because of point 6, BYTEVERSION
had to be bumped.
git-svn-id: https://svn.eduke32.com/eduke32@3975 1a8010ca-5511-0410-912e-c29ae57300e0
- Allow xoffset and yoffset to modified independently of a tile definition, much like texhitscan and nofullbright.
(Both still default to zero when a tile is specified, to keep current behavior, and because it makes sense.)
- Add actual detection of the "nofullbright" keyword, which appears to have been overlooked in r3230.
- Internal: Eliminate the need for one int32_t by condensing two variables into "flags".
git-svn-id: https://svn.eduke32.com/eduke32@3973 1a8010ca-5511-0410-912e-c29ae57300e0
Also, very slightly tweak a factor toward a "brighter" (farther visible)
scene overall to account for the "circular" nature of the fragment distance
(as opposed to an "ortho" distance in Build).
git-svn-id: https://svn.eduke32.com/eduke32@3962 1a8010ca-5511-0410-912e-c29ae57300e0
So there's no "jump" from vis!=0 to vis=0 making the texture appear brighter.
git-svn-id: https://svn.eduke32.com/eduke32@3959 1a8010ca-5511-0410-912e-c29ae57300e0
That is, for shade of objects, use shade tables. For visibility, use GL fog.
Mixing these two does not produce satisfactory results in areas where both
shade and visibility darkening are high, such as around the E1L1 restroom.
git-svn-id: https://svn.eduke32.com/eduke32@3941 1a8010ca-5511-0410-912e-c29ae57300e0
Having to tag these few variables and functions as ATTRIBUTE((used))
seems sensible, but what follows is just strange. OSD_Printf? headspritesect?
git-svn-id: https://svn.eduke32.com/eduke32@3932 1a8010ca-5511-0410-912e-c29ae57300e0
Also, get rid of the strange filename[len]=255 hack in loadboard()
and make its file name arg const char* at last.
git-svn-id: https://svn.eduke32.com/eduke32@3913 1a8010ca-5511-0410-912e-c29ae57300e0
Also, clean up the saving/loading logic a bit:
- On load failure, display message with purple color.
- Take over the current file name ('boardfilename') only on success.
- Check SaveBoard() return values in various places.
git-svn-id: https://svn.eduke32.com/eduke32@3911 1a8010ca-5511-0410-912e-c29ae57300e0
In other words, for a test rectangular sector, a sprite would be inside the
sector in on all 4 edges and all 4 corners. Previously, it would have been
the lower right portion only (*excluding* LL and UR corners), which led to
map editing issues.
git-svn-id: https://svn.eduke32.com/eduke32@3898 1a8010ca-5511-0410-912e-c29ae57300e0
The main thing to note is the "half-open" nature of the x/y range checks.
git-svn-id: https://svn.eduke32.com/eduke32@3897 1a8010ca-5511-0410-912e-c29ae57300e0
It's hard to call this a fix, since ideally, buffer sizes like these would be
only as large as needed in the worst case.
git-svn-id: https://svn.eduke32.com/eduke32@3880 1a8010ca-5511-0410-912e-c29ae57300e0
Interestingly, that test case then appears to be drawn fully. Heh.
Also, move one clamp from r1874 one up in the data flow chain.
Doesn't seem to break textured overhead map view with Last Pissed Time.
git-svn-id: https://svn.eduke32.com/eduke32@3878 1a8010ca-5511-0410-912e-c29ae57300e0
Also add an assertion that currently sometimes fails when zooming in too much
in Mapster32 textured 2D mode. Example: DNF's LADYKILLR.MAP at (46000,-14000).
git-svn-id: https://svn.eduke32.com/eduke32@3877 1a8010ca-5511-0410-912e-c29ae57300e0
The latter checked with #defined HAVE_GTK2, which is probably not correct
for every platform.
In builds without a startup window, the periods get mingled with stdout
output otherwise.
git-svn-id: https://svn.eduke32.com/eduke32@3827 1a8010ca-5511-0410-912e-c29ae57300e0
In 3D mode, Alt+F now only attempts to set the first wall of the aimed at
wall, not collecting upper/lower neighbors. For this, press Shift+Alt+F.
In 2D mode, they are always collected.
git-svn-id: https://svn.eduke32.com/eduke32@3825 1a8010ca-5511-0410-912e-c29ae57300e0
Analogously for the negation; remove a couple of redundant decls of "qsetmode".
git-svn-id: https://svn.eduke32.com/eduke32@3823 1a8010ca-5511-0410-912e-c29ae57300e0
The 'x' is for "extended", since its last arg is a switch of whether to disable
sliding. Use that from gameexec.c.
git-svn-id: https://svn.eduke32.com/eduke32@3811 1a8010ca-5511-0410-912e-c29ae57300e0
Also, update test_tileoffsets.map with a new 'dimension': cstat 128
(sprite centering). It has an issue in Polymer marked with a silver D.
git-svn-id: https://svn.eduke32.com/eduke32@3777 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes the case marked with the silver letter C in test_tileoffsets.map.
The orientation of the sprites is correct (matches classic) as far as I can
see, there are now only problems with translation.
git-svn-id: https://svn.eduke32.com/eduke32@3776 1a8010ca-5511-0410-912e-c29ae57300e0
Also, add some defines for sprite cstats to build.h (SPR_*) and use them.
git-svn-id: https://svn.eduke32.com/eduke32@3775 1a8010ca-5511-0410-912e-c29ae57300e0
