If enabled, this makes the following arrays be allocated statically:
spriteext, spritesmooth, sector, wall, sprite, tsprite, while
necessarily disabling the clipshape feature (because it relies on
setting sector/wall to different malloc'd block temporarily).
To compile, pass DEBUGANYWAY=1 in addition to RELEASE=0 to 'make',
and it's really only useful with CC=clang, of course.
git-svn-id: https://svn.eduke32.com/eduke32@2270 1a8010ca-5511-0410-912e-c29ae57300e0
- 'whitecol' was defined in the engine and in build.c, use only the engine one
- make cachesize, artsize, artversion static in engine.c
- undo some formatting havoc presumably done by astyle
git-svn-id: https://svn.eduke32.com/eduke32@2260 1a8010ca-5511-0410-912e-c29ae57300e0
The cause was a combination of many factors. First, Polymer requires the
start-drawing position to be inside the sector to draw (deviations lead to
incorrect drawing). This was violated by the game, because it interpolated
the current and next tic position without updating the sectnum, leading to
inconsistencies especially when passing through narrow sectors. Polymer
worked around it by doing an updatesector() each frame, however this works
poorly for maps with overlapping geometry such as SoS or RoR.
The solution to this is to add a new engine function,
updatesector_onlynextwalls(), which searches the sectors (via nextsector)
in breadth-first fashion instead of from 0 to numsectors-1, like updatesector
does when it fails for the *immediate* nextwall neighbors.
Internally, the breadt-first search helpers are moved into the engine.
git-svn-id: https://svn.eduke32.com/eduke32@2256 1a8010ca-5511-0410-912e-c29ae57300e0
the SE ones douple, triple, ... after each save. Maphack lights are reloaded
with polymer_resetlights() (though I've had them disappearing after load, I
couldn't reproduce it afterwards).
- in debugging builds, print a message when polymer_resetlight is called on a
nonexistent one. The problem is not so much the call itself (it's guarded),
but the fact that resources on the caller side may not have been freed if it
thinks that those lights do in fact exist. Right now, it's not the case though.
- add 'loaded map hack' messages after some other successful loadmaphack calls
git-svn-id: https://svn.eduke32.com/eduke32@2236 1a8010ca-5511-0410-912e-c29ae57300e0
Usage: press the ['] (quote) modifier together with the PERIOD key.
Aligns only the immediate upper and lower neighbors of each wall that got
aligned by following point2s or nextwalls. Doesn't play well with Alt
(carry over xrepeat) yet, might need two subsequent alignment passes.
git-svn-id: https://svn.eduke32.com/eduke32@2178 1a8010ca-5511-0410-912e-c29ae57300e0
How in the name of hell this could pass undetected for so long is a
mystery to me.
git-svn-id: https://svn.eduke32.com/eduke32@2163 1a8010ca-5511-0410-912e-c29ae57300e0
them has a different height, print the sectnums of two differing sectors
to so that the mapper can find and examine them with Ctrl-J.
git-svn-id: https://svn.eduke32.com/eduke32@2146 1a8010ca-5511-0410-912e-c29ae57300e0
and restore_highlighted_sector functions. What this means is that TROR bunches
are now correctly duplicated too (only if all sectors of a given bunch are
highlighted).
git-svn-id: https://svn.eduke32.com/eduke32@2138 1a8010ca-5511-0410-912e-c29ae57300e0
(i.e. first press RAlt, then hold RShift to make it active), consider all
sectors, even the grayed out ones.
This makes 6 modifier keys in 4 categories for RAlt. Can you name them all?
Also spell out the labels that get drawn near the reticle when applying
some of the modifiers and make them not show when not actually selecting
(e.g. pressed RShift alone, but have highlighted sectors)
git-svn-id: https://svn.eduke32.com/eduke32@2137 1a8010ca-5511-0410-912e-c29ae57300e0
that bunches and nextwall links are restores, too. Now, to coalesce two
TROR maps (e.g. for a CBP), one could
do for i allsectors, sethighlightsector i 1
on the console, and then load the 'other' map to copy over the contents
of the first, including all TROR stuff. Note that neither selecting
all sectors with RAlt, nor duplicating them with Insert would lead to
the desired effect (yet).
Internally,
- yax_setbunch() now has different behavior for bunchnums -1, -2 and -3
(it either clears the nextwalls or not)
- build.c has a helper function free_n_ptrs(). This could be handy in
other situations where many blocks of memory must be allocated
consecutively and freed in case of failure
git-svn-id: https://svn.eduke32.com/eduke32@2136 1a8010ca-5511-0410-912e-c29ae57300e0
suboptimal, but at least 'correct' and won't produce the aforementioned
corruptions anymore.
git-svn-id: https://svn.eduke32.com/eduke32@2135 1a8010ca-5511-0410-912e-c29ae57300e0
next{wall,sector} indices instead of using checksectorpointer() so
that the nextwalls will be restored exactly as they were (provided
that they are copied). Also fix tweaking the sectnums of sprites.
git-svn-id: https://svn.eduke32.com/eduke32@2132 1a8010ca-5511-0410-912e-c29ae57300e0
Called 'loop punching'. In addition to duplicating the loop, the inner
portions of the original and cloned loop are made into a new bunch, and
the loop walls are made to be neighbors, linking their movement to each
other. This gives a way to create island sectors with a differing
bunchnum in the midst of an already extended area.
Usage:
For an extended sector containing a CCW inner loop, select its points
using Ctrl+Shift. Press Ctrl-E to be queried whether to duplicate the
points into the upper or lower extension (even if it's unambiguous).
A number of conditions must be met for a successful 'punch', which
should hopefully be more or less obvious. Among them:
- loop walls should all be red
- the starting wall is only considered among the non-grayed-out ones
- the neighboring sector must not contain points inside or at the loop
git-svn-id: https://svn.eduke32.com/eduke32@2130 1a8010ca-5511-0410-912e-c29ae57300e0
would break out of the 2D mode loop when splitting a sector would exceed
limits.
git-svn-id: https://svn.eduke32.com/eduke32@2129 1a8010ca-5511-0410-912e-c29ae57300e0
- Don't crash when sector joining fails under certain circumstances.
- Increase the point lock (Manhattan) distance from 1/16th to 1/8th
of the grid square length, making it easier to snap to vertices not
lying at the grid points with grid lock on
- When drawing walls, don't snap to any of them except the first drawn
git-svn-id: https://svn.eduke32.com/eduke32@2126 1a8010ca-5511-0410-912e-c29ae57300e0
When having drawn N new points (and having one 'free') and pressing
ENTER, the N line segments between the new points are checked one by
one for intersection with every non-grayed-out wall and a wall vertex
is inserted at every intersecting point. This may be viewed as a
prerequisite for a 'cutter' style tool.
git-svn-id: https://svn.eduke32.com/eduke32@2125 1a8010ca-5511-0410-912e-c29ae57300e0
This function only handles the actual insertion, also taking care of
constrained TROR walls. Anything around the inserting such as backing up
drawn walls or snapping the x/y position to the grid is handled outside.
git-svn-id: https://svn.eduke32.com/eduke32@2123 1a8010ca-5511-0410-912e-c29ae57300e0
The main change consist of adding a key press (and release) callback
whose only purpose is to be used from m32script as EVENT_KEYPRESS.
When entering that event, the RETURN variable will be set to the
keystatus code of the key, and whether it was pressed or released can
be checked by looking at keystatus[] at that code (ifholdkey and
ifhitkey do this). The purpose of this, then, is to be able to remap
keys in a more general (and complicated) fashion than is possible with
the mapster32.cfg 'remap' option. Various other additions build around
this central one:
- add an example EVENT_KEYPRESS to a.m32, among other things emulating
the keypad arrows with Alt-<normal arrows> for notebook convenience;
disabled initially
- a.m32: set 'owner' with Alt-KP2: now Alt-Shift-KP2, because of
collision with the above
- new m32script command: setkey <keycode>, setting keystatus[<keycode>]
to 1 (note: may be restricted to use in EVENT_KEYPRESS only in the
future)
- fix indexing an m32script array with a defined label, there used to
be a 'not a gamevar' error instead
- add the following constant labels for some key codes:
KEY_SCROLL, KEY_F1 .. KEY_F12
git-svn-id: https://svn.eduke32.com/eduke32@2122 1a8010ca-5511-0410-912e-c29ae57300e0
with no highlighted sectors; and when entering 3D mode, even if there are
highlighted sectors. This should have almost no effect, but I find it cleaner
that way.
- Check map for corruption every time an editing change is done. This was
accidentally disabled when commenting out the undo code (which I've yet
to debug).
git-svn-id: https://svn.eduke32.com/eduke32@2121 1a8010ca-5511-0410-912e-c29ae57300e0
of SPACE and C when in side-view mode. Now, this is accomplished by checking
directly in the overheadeditor code.
git-svn-id: https://svn.eduke32.com/eduke32@2119 1a8010ca-5511-0410-912e-c29ae57300e0
- new mapster32.cfg and OSD variable 'fixmaponsave_sprites', telling the
editor whether to 'fix' the sprite sectnums on saving and entering 3D
mode. Note that a) sprite sectnums are never fixed when 'script_expertmode'
is enabled, as before, and b) sprites that have out-of-bounds sectnums
are still fixed if a proper sector is found
- if saving and some sprite sectnums have thus been tweaked, inform the
mapper on the status line and print the changes in the OSD
- fix update issue similar to an earlier one: when 'saving as', the astub.c-
based file name is now updated too, so saving with Ctrl-S now saves into
the one save with 'save as' (and not the old one)
- don't attempt to recheck wall pointers from scratch (when saving and running
with -check) if it's a TROR map
git-svn-id: https://svn.eduke32.com/eduke32@2110 1a8010ca-5511-0410-912e-c29ae57300e0
last one + this one:
A couple of tweaks against accidental overwriting of maps.
- first, fix a bug where the map name wasn't reset to 'newboard.map' when starting a
new map
- When saving with Ctrl-S, query the user for confirmation and also show the file name
where the map will be written
- when going into the ESC-menu, print the file name where the map will be written
on pressing 'S' above the '(S)ave' text
git-svn-id: https://svn.eduke32.com/eduke32@2096 1a8010ca-5511-0410-912e-c29ae57300e0
cursor, query the mapper to pick one. The joining can still fail afterwards,
which makes it only a semi-automatic helper feature.
git-svn-id: https://svn.eduke32.com/eduke32@2092 1a8010ca-5511-0410-912e-c29ae57300e0
allowed circle-walls started on the unconstrained _other_ side of a constrained
wall. Also fix a potential invalid wall access when inserting a point (pretty
serious, that!)
git-svn-id: https://svn.eduke32.com/eduke32@2091 1a8010ca-5511-0410-912e-c29ae57300e0
also for make-circle (C, SPACE). There's still a TROR corruption happening
probably when inserting on constrained walls, but I've yet to get behind the
real cause.
git-svn-id: https://svn.eduke32.com/eduke32@2090 1a8010ca-5511-0410-912e-c29ae57300e0
some wall drawing state is ripped out from overheadeditor() into a
a file-scope struct (even if we don't yet need it there). If the deleting
touches the first drawn point, the walls drawn so far are cleared.
git-svn-id: https://svn.eduke32.com/eduke32@2089 1a8010ca-5511-0410-912e-c29ae57300e0
overheadeditor() by allocating temp variables in the blocks where they
are needed.
git-svn-id: https://svn.eduke32.com/eduke32@2088 1a8010ca-5511-0410-912e-c29ae57300e0
the nextwall pointers correctly; Add some 'asksave=1' and 'make old-nextwalls
invalid'.
git-svn-id: https://svn.eduke32.com/eduke32@2048 1a8010ca-5511-0410-912e-c29ae57300e0
of the picnums of all sprites, omit the newly inserted sprite itself!
git-svn-id: https://svn.eduke32.com/eduke32@2043 1a8010ca-5511-0410-912e-c29ae57300e0
before, and additionally a mode that doesn't clip against masked walls
and sprites.
git-svn-id: https://svn.eduke32.com/eduke32@2028 1a8010ca-5511-0410-912e-c29ae57300e0
always like this now:
ExtUninit -> (writesetup, misc.)
uninitengine -> (uninitsystem -> (uninit timers, mouse, ...))
exit()
Some paths still lead to a plain exit(), like failures in cache1d.c or mdsprite.c
git-svn-id: https://svn.eduke32.com/eduke32@2022 1a8010ca-5511-0410-912e-c29ae57300e0
handled could lead to a bunch whose floors and ceilings covered different
areas. A fix for the reduced functionality arising from this change is
underway.
- Rewrite a small portion of code using yax_vnextsec() in game.c.
git-svn-id: https://svn.eduke32.com/eduke32@2019 1a8010ca-5511-0410-912e-c29ae57300e0
Specifically, now also consider the sprite tile's yoffset, and fix an
issue when a tsprite got duplicated 'toward' the viewer. Also add a
couple of tests in trueror1.map.
git-svn-id: https://svn.eduke32.com/eduke32@2004 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the latter also correct when testing a map from the editor.
git-svn-id: https://svn.eduke32.com/eduke32@2001 1a8010ca-5511-0410-912e-c29ae57300e0
on the command-line isn't found (instead of saying nothing)
* editor: Move inconsistent (stat&2)/heinum detection into the corruption
checker. This makes a lot of original maps spew countless 'errors', but
it's preferable for new maps since such floors and ceilings could behave
strangely with TROR.
git-svn-id: https://svn.eduke32.com/eduke32@1995 1a8010ca-5511-0410-912e-c29ae57300e0
by using setspritez() instead of setsprite() for the sectnum updating.
* Change 'yax-nextwall(0/1)' to 'upwall/downwall' in the corruption checker, makes it much nicer to read.
git-svn-id: https://svn.eduke32.com/eduke32@1959 1a8010ca-5511-0410-912e-c29ae57300e0
* make Ctrl-Alt-A (formerly 'toggle inner gray walls') now remove all gray walls entirely in 2d mode
* make r_usenewaspect enabled by default
git-svn-id: https://svn.eduke32.com/eduke32@1957 1a8010ca-5511-0410-912e-c29ae57300e0
* fix breaking out of 'switch' blocks and compilation of the 'default' case
* Have a way of assigning 'special function' menu [' F] entries to script states. Writing a string literal after the state name will register the state under that name. Menu names are limited to 24 characters and it's possible to have up to 16 of them.
* new branching command 'ifinteractive', true if a state runs from the menu mentioned above.
* new command: getnumberfromuser <<retvar>> "query_string" <maxnum> <flags>
See 'state collect_teleporting_sectors' in a.m32 for a combined usage of the new functionality.
git-svn-id: https://svn.eduke32.com/eduke32@1955 1a8010ca-5511-0410-912e-c29ae57300e0
* helper feature: when shade preview is enabled, the ceilings and floors of highlighted sectors are shown in pal 6. This makes it possible to highlight the TROR-joining candidate sectors in 3D mode using e.g. 'sethighlightsector searchsector 1' while aiming at the respective ceilings and floors, and get visual feedback.
* when failing TROR-joining early ('no consistent joining combinations found'), print to the console why it failed.
* more Makefile.deps updating
git-svn-id: https://svn.eduke32.com/eduke32@1952 1a8010ca-5511-0410-912e-c29ae57300e0
* New shade/visibility calculation code, which is activated with 'r_usenewshading' (on by default), and is closer to the classic look. Also tweak the FOGSCALE macro to have approximately the same fog distance with all renderers.
* Mapster32: END modifier to RShift. If it's pressed when RShift is released, sprites which are in grayed out sectors are also selected; Make changing shade affect all highlighted sprites in 3D mode (when aiming at one of them).
* some debug code to watch out for suspicious glGenTexture/glDeleteTextures calls, not active.
git-svn-id: https://svn.eduke32.com/eduke32@1943 1a8010ca-5511-0410-912e-c29ae57300e0
First, it is now possible to disable the memcache (which is there to cache the texcache) by setting the new cvar 'r_memcache' to 0. Do this if you're constrained on memory or getting crashes when e.g. doing vidrestart often. Also, the memcache will disable itself (and free its storage, if it's there) the first time it fails to allocate.
Fix a strcpy with identical arguments in game.c and a couple of uninitialized mem accesses related to Polymer lights.
git-svn-id: https://svn.eduke32.com/eduke32@1941 1a8010ca-5511-0410-912e-c29ae57300e0
The main feature is the addition of -mx and -mh command-line parameters to EDuke32 and Mapster32. These parameters include a con and def "module" respectively. This translates into essentially including the file from the bottom of the compiled script.
I fixed the classic buggy behavior of the BROKEHYDROPLANT and REACTOR2 sprites.
I also fixed a small, long-standing bug where FRAMEEFFECT1 blurs are not affected by sector floorpal. You can see one example of this by shrinking the Enforcer on the upper inside of the toppled building in E3L11: Freeway.
I tweaked the Makefile so that it would automatically regenerate the keep.me files in the $(OBJ) and $(EOBJ) directories after they are deleted for cleaning.
One final change is a slight positioning cleanup of both programs' --help dialog boxes.
git-svn-id: https://svn.eduke32.com/eduke32@1937 1a8010ca-5511-0410-912e-c29ae57300e0
* slightly tweaked status line, now also displaying the number of bunches
* fix a couple of issues unearthed by valgrind and a TROR nextwall corruption when joining sectors
git-svn-id: https://svn.eduke32.com/eduke32@1930 1a8010ca-5511-0410-912e-c29ae57300e0
* it is now possible to paste (and have an outer red wall automatically) highlighted sectors into a sector that is extended on one side and non-sloped on the other. For this, the highlighted sectors must be in one connected component.
* Make it possible to not display inner gray walls, toggled with Ctrl-Alt-A, but only when no manual grayout (Ctrl-R) is in effect.
* bugfix: don't clear original TROR-nextwall link when duplicating extended highlighted sector
* m32script: protect wall members relevant to TROR
* save autogray (Ctrl-A) and showinnergray (see above) to mapster32.cfg
git-svn-id: https://svn.eduke32.com/eduke32@1928 1a8010ca-5511-0410-912e-c29ae57300e0
- sethighlightsector <sectnum> <on?>
- updatehighlightsector
- collectsectors <<array_to_collect_sectnums>> <initial_sector> <<num_collected_sectors>> <sector_filtering_state>
The latter does a breadth-first search starting from an initial sector and collects nextsectors only when the filtering state, given a sectnum as RETURN input, writes a nonzero value into RETURN. As a usage example, a.m32 includes the state 'collect_teleporting_sectors', that collects all sectors containing an SE7 and highlights them afterwards. This way, it should be possible to retrofit old maps with TROR by distributing small scripts that do most of the work (right now, joining has to be done by hand, though).
* corruption checker: for the 'nextwall inconsistent with nextsector' corruption, suggest an alternative fix by searching fitting nextwalls and changing the nextwall of the corrupt wall (as opposed to the nextsector). It will display with a leading '?' in the listing, and can be demanded by suffixing 'corruptcheck tryfix' with it. For example,
corruptcheck tryfix 9-21 ?
would fix some corruptions in Billy Boy's cranium.map without introducing drawing errors.
* fix demo playback (tueidj figured this out)
git-svn-id: https://svn.eduke32.com/eduke32@1927 1a8010ca-5511-0410-912e-c29ae57300e0
* When dragging highlighted sprites, do a setsprite() after each position update. This way, they won't end up on the wrong level
* TROR support for SE 31 and 32 in-game, example provided in test map
* some uncommited stuff for TROR: SE 6/14
git-svn-id: https://svn.eduke32.com/eduke32@1924 1a8010ca-5511-0410-912e-c29ae57300e0
* Make the minimum resolution possible 640x480. Sometimes you'd accidentally enter something like 'vidmode 800 60' and crashes would ensue...
* fix a warning
git-svn-id: https://svn.eduke32.com/eduke32@1921 1a8010ca-5511-0410-912e-c29ae57300e0
"The most noticeable change is the addition of the "includedefault" CON and DEF command, which will attempt to include eduke.con (or nam.con, or ww2gi.con), then game.con, or duke3d.def, or nam.def, or ww2gi.def. This is useful for TCs like my add-ons, where for my pseudo-mutators I currently say "include EDUKE.CON", but I also have to juggle this terrible order of paths, so that I can have an EDUKE.CON file in my HRP which says "include GAME.CON" to allow the mainline game to actually run, but also allow DukePlus to load its EDUKE.CON file (since it uses that and not an -x switch), and also allow any custom EDUKE.CON files in the root to be used."
git-svn-id: https://svn.eduke32.com/eduke32@1909 1a8010ca-5511-0410-912e-c29ae57300e0
* When TROR-joining and sectors reachable through former red walls could need displacement, ask the user; if something is wrong with the walls of the two components to join, jump to that place and print coordinates of offending wall and its point2 in the OSD
* Ctrl-TAB in 2D mode now toggles filling of the currently aimed-at sector; it's not very in sync with the rest of the controls though (e.g. some commands will potentially affect each sector that contains the crosshair)
* Fill sectors slightly different so that highlighted sectors above each other are easier to distinguish
* In the editor, always clear the screen to a 'rainbow' of the palette before each frame. This makes no-draw ('HOM') and accidental translucency glitches stand out more clearly
* a few misc. tweaks, consistency checks, and fixes
git-svn-id: https://svn.eduke32.com/eduke32@1901 1a8010ca-5511-0410-912e-c29ae57300e0
* Mapster32 now makes sandwiches, too: select all floors of a bunch and 'extend them below'. This will put a new sector between the highlighted ones and the their lower neighbors and displace the z's accordingly. Make sure you have enough headroom.
* To facilitate the above, RAlt now has two more modifier keys (checked at release time, as usual): for every sector that would be selected, END will select all sectors whose floor bunchnum equals the first (this is useful for sandwiching), and HOME will select all sectors whose ceiling bunchnum equals it (not very useful, but provided for completeness).
* Sloping extended sectors is now checked more rigorously
-- misc:
* When deleting highlighted sectors with DEL, pressing LShift will now always delete them irrespective whether the mouse pointer is over one of them. This is useful for the cleanup of corrupted maps.
* 2D drawing is slightly tweaked so that active walls always display over inactive ones
git-svn-id: https://svn.eduke32.com/eduke32@1900 1a8010ca-5511-0410-912e-c29ae57300e0
game: when entering/leaving water or slime, delay changing palette by one game tic to make it look right
git-svn-id: https://svn.eduke32.com/eduke32@1899 1a8010ca-5511-0410-912e-c29ae57300e0
* rudimentary TROR support
* free mixing of multi- and single-tile pskies
* Don't cull models behind you. That is, treat them like floor sprites in that respect. This way large models like corpses don't disappear from the view unexpectedly.
Classic:
* tweak the last row and column of the translucency table so that e.g. a transparent sprite against a FANSPRITE wall doesn't show up purple (only if Duke3D table is found)
Misc.:
* fixes TROR-nextwall corruption when deleting sectors
* tile selector 'goto' now has also completion
* I forgot a file for the non-OpenGL build last time
git-svn-id: https://svn.eduke32.com/eduke32@1892 1a8010ca-5511-0410-912e-c29ae57300e0
* make it possible to duplicate from extended sectors; all extensions are cleared from them
* lazy hightile loading in tile selector can now be disabled in mapster32.cfg
* fixes USE_OPENGL=0 build
git-svn-id: https://svn.eduke32.com/eduke32@1890 1a8010ca-5511-0410-912e-c29ae57300e0
* more useful auto-red wall feature: if no structure-changing operations have been applied after highlighting and duplicating, now also paste 'visual' fields of outer walls (this is one example of the use of a system that temporarily keeps track of nextwalls for former red lines)
* multi-pkies now have individual parallaxyscale
git-svn-id: https://svn.eduke32.com/eduke32@1886 1a8010ca-5511-0410-912e-c29ae57300e0
* support for free mixing of multi- and single-tile parallaxed skies in classic
* make visibility independent of yxaspect and viewingrange in OpenGL modes
-- editor:
* when dragging walls, restore pixel width after that (only for the left and right walls of pointhighlight, and its nextwalls, if any)
* pasting on walls and auto-aligning them now carries over a few more fields
-- fixes:
* visibility in OpenGL modes wasn't incremented gradually (regression due to making 'clamp' an inline function instead of a macro)
* memory corruption due to calling qlz_compress with less than the recommended surplus storage of 400 bytes
* decorative sprites in the mirror showing non-flipped
* make the subway SE message (much) more helpful by showing which sector the game considers to be the track sector
git-svn-id: https://svn.eduke32.com/eduke32@1882 1a8010ca-5511-0410-912e-c29ae57300e0
* Polymer light access to m32script (light[<lightidx>].<field>). As an application, provide a state 'insertlights' that takes the currently active lights and puts them into the map as SEs (e.g. for maphack recovery).
* Prototype of a mechanism to gray out certain portion of a map, making them inactive to various, but not all, editing operations. Highlighting a set of sectors and pressing Ctrl-R will make the Z bounds be [(least ceiling z), (greatest floor z)] of all selected ones, pressing Ctrl-R when no sectors are highlighted will reset them. Not sure if it's for production use at this stage...
* The 'align walls' feature [.] now has three independently toggleable behaviours: recurse nextwalls (toggled when Ctrl is pressed), iterate point2s (disabled when Shift is pressed), and also copy pixel width (toggled when Alt is pressed).
* Make shades clamp instead of overflowing in the editor
Fixes:
* crash when carrying out certain operations on walls with xrepeat 0
* the Pause key on linux. Also make demo recording start on Shift-ScrollLock because ScrollLock alone is too easily pressed when pausing
git-svn-id: https://svn.eduke32.com/eduke32@1877 1a8010ca-5511-0410-912e-c29ae57300e0
* Tag labeling system for 'link'-type tags, including saving and restoring the tag labels to a separate file '<mapname>.maptags'. Whether a tag is eligible for linking, is determined by a hardcoded (but extensible via m32script) function.
git-svn-id: https://svn.eduke32.com/eduke32@1867 1a8010ca-5511-0410-912e-c29ae57300e0
* Sprite cstat 2048 ('use own shade', [N]) now works more or less. (Issues may arise when combined with sector light effects.)
* Begin work on 'smart' tag labeling system for Mapster32. Right now, it only displays a '+' after tags with linking semantics.
*
git-svn-id: https://svn.eduke32.com/eduke32@1866 1a8010ca-5511-0410-912e-c29ae57300e0
* Consolidate the various, slightly different, methods of bounding a sprite between a sector's ceiling and floor into one common function
* Fixes for accumulated bugs: shade preview, r_shadescale_unbounded, and a couple of unreported ones
* Yaks, gnus, and bisons...
git-svn-id: https://svn.eduke32.com/eduke32@1854 1a8010ca-5511-0410-912e-c29ae57300e0
* Refactor two nearly identical chunks in polymost.c into one function in the hope of getting some more, but interestingly that did nothing at all. At least it's more readable this way...
* Commit, but don't enable, code for writing PNG screenshots (I'm tired of converting them every time). Requires libpng which in turn requires zlib.
git-svn-id: https://svn.eduke32.com/eduke32@1852 1a8010ca-5511-0410-912e-c29ae57300e0
Engine stuff:
* Add 'r_shadescale_unbounded' cvar. When set to 0, OpenGL renderers should never
draw completely black objects (currently only implemented for Polymost)
Mapster32:
* Add 'r_shadescale' to config
* In 3D mode, make SPACE behave the same as holding down a mose button: the
currently pointed-at object is locked. Required some modification of a.m32
to play well (i.e. not reset SPACE). This is useful by itself but more so
in conjunction with the next point
* make Alt behave as a modifier with PGUP/PGDN: when aiming at a 2-sided wall,
move the other side's sector's ceiling or floor (only this is new).
* Auto-alignment of walls can be controlled in a finer grained fashion now:
When pressing '.', only the immediate neighbors get aligned. Use Ctrl-. for
the old behaviour.
* When inserting a point in 2D mode, auto-align the neighboring wall
git-svn-id: https://svn.eduke32.com/eduke32@1848 1a8010ca-5511-0410-912e-c29ae57300e0
* Have the corruption checker catch this case among a few other new ones. Rename OSD command 'autocorruptcheck' to simply 'corruptcheck' with options 'corruptcheck <seconds>', 'corruptcheck now' and 'corruptcheck tryfix'.
* When pasting sector selection into valid player space (releasing AltGr), ask whether a surrounding outer loop should be created since this is probably not always desired.
git-svn-id: https://svn.eduke32.com/eduke32@1790 1a8010ca-5511-0410-912e-c29ae57300e0
engine:
* sector-like sprite clipping now works with x- xor y-flipped actual sprites
mapster32:
* corruption checker has been hooked up to loading/saving routines to inform/warn the user
* also warn if mouse pointer is over corrupt wall which is shown in pink then: you should not move such a wall!
* faster map loading by deferring polymer_loadboard to 3d mode entrance (also removes some 'glGetTexLevelParameteriv returned GL_FALSE' warnings)
* more logical maphack light handling, the logic is still a bit dodgy though
* some menu and misc. function fixup
* redundancy elimination...
API:
* added consts various for 'char *filename' parameters
* loadboard() now accepts bit 4 for flags (formerly 'fromwhere')
git-svn-id: https://svn.eduke32.com/eduke32@1760 1a8010ca-5511-0410-912e-c29ae57300e0
First, there's a new script for the generation of highpalookup images. Python 2.6, NumPy and PIL are required.
Next, the map corruption checker has been ported to C. This is so that Mapster32 will be able to take decisions more cleverly based on the corruptness of the map. It also catches a few more issues like inconsistent nextwall/nextsector tags now.
Finally, link the executables with --large-address-aware on Windows. This gives a gig more private virtual memory on XP when booting with /3GB. YMMV, but I can play IW2 with Polymer now.
git-svn-id: https://svn.eduke32.com/eduke32@1751 1a8010ca-5511-0410-912e-c29ae57300e0
