* entering a savegame description did not work anymore
* the length check was too restrictive and always underestimated the available space
* use the console font for entering a savegame description. This has more characters and better contrast for this content.
* the interface to the text enterer used bad measurements.
For the Doom IWADs the provided font looks almost identical to the characters used on the title patches. So, for any level name that got replaced in some language, it will now check if the retrieved name comes from the default table, and if not, ignore the title patch and print the name with the specified font.
This also required removing the 'en' label from the default table, because with this present, the text would always be picked from 'en' instead of 'default'. Since 'en' and 'default' had the same contents, in any English locale the 'default' table was never hit, so this won't make any difference for the texts being chosen.
Last but not least, wminfo has been made a local variable in G_DoCompleted. There were two places where this was accessed from outside the summary screen or its setup code, and both were incorrect.
This was broken by several small unicode-incompatible code fragments.
This commit also removes the input limit for the player name and the savegame description. With multibyte encoding, limiting them to a fixed length did not work right.
Currently these will just overflow the fields if the text becomes too long, this needs some additional work.
What is done:
D1. Controls are separated by existing sections, each section is now a submenu;
D2. The original sections are preserved;
D3. The original controls order is preserved;
D4. "Controls" section is renamed to "Game", because "Controls" submenu of "Customize Controls" would be too confusing;
D5. Map (automap) controls are added as a section, map controls submenu is unchanged;
D6. Missing controls are added to "Other" section;
D7. Sections are given a title following the scheme "Customize <section> Controls", except N4 (see below).
D8. Inside the sections, spaces are added to group the related controls.
Things that I'm not sure about:
N1. "Game" controls section name is too generic - I'll gladly change it to something more suitable;
N2. "Other" controls section name is too generic - I'll gladly change it to something more suitable;
N3. Map controls submenu could use some spacing, and internal title ("Map Controls") is redundant;
N4. "Strife Popup Screens" section name is too long to fit in scheme described in D7, therefore the title is "Strife Popup Screens Controls";
N5. "Game" section could be divided further, but this will break the original menu structure.
Now that GZDoom supports uppercase and lowercase characters in the BIGFONT format, this commit actually adds those characters. It contains full support for both the English and Russian (minus the letter Ё) alphabets for both Doom and Strife. As for the existing punctuation graphic lumps in Strife, all extra space is removed, and the sprite offsets are adjusted instead.
This also adjusts the English language file so that all menu header texts utilize these new characters. As a tiny extra, it also adds the letter Ё to the Strife smallfont.
(Credits to Skulltag for the uppercase B, Amuscaria for the uppercase X and Z, and @jnechaevsky for all Russian characters, taken from Russian Doom!)
With localization for non-Latin languages on the support list the multibyte API doesn't cut it anymore. It neither can handle system text output outside the local code page nor can an ANSI window receive text input outside its own code page.
Similar problems exist for file names. With the multibyte API it is impossible to handle any file containing characters outside the active local code page.
So as of now, everything that may pass along some Unicode text will use the Unicode API with some text conversion functions. The only places where calls to the multibyte API were left are those where known string literals are passed or where the information is not used for anything but comparing it to other return values from the same API.
The script side cannot do anything useful with this, because most actions require parameters in global variables, so this is a first grade candidate for rogue mods to make the engine misbehave.
To make things easier, DBIGFONT, SBIGFONT and HBIGFONT will now be renamed in the lump directory to make things a bit easier to handle.
Another change is to make font folders atomic units to prevent cross-pollution between incompatible fonts. The only exception to this are the def* folders because they need to piece together their fonts from both zd_extra.pk3 and the IWADs.
The added table may be overkill but this way the font engine is prepared for things to come.
Currently the text placement in the menu seems a bit broken, that's a task for later.
One sector in an underwater area of KDIZD Z1M3 got tagged with an incorrect Transfer_Heights effect which caused render glitches in that area.
There were also a few AddSectorTag calls without first clearing the sector's tags leading to potentially undefined behavior.
It now reads everything into a two-dimensional TMap and creates a list of mappings that apply to the current setting.
The constant need for reloading was the main blocker in redesigning how Dehacked strings get inserted. Currently they override everything, but IWAD-based Dehacked text shouldn't block PWAD overrides from PWADs' LANGUAGE lumps and instead be treated as coming from an [en default] block.
This also renames the main block from [enu default] to [en default], because it should be treated as the English default for all English locales and not just make it fall through to the base default as it did before.
Now all this content can be localized. However, since this is actual game content it was placed in a secondary file in zd_extra.pk3, so that it won't affect the GPL-compatible status of the main one.
The text file
gzdoom/wadsrc/static/zscript/statscreen/statscreen.txt
is set to use strings called “$ENTERING” and “$FINISHED”, located in the language files, in intermission screens between levels in Heretic. However, these strings are named incorrectly in the language files, instead being written as “$WI_ENTERING” and “$WI_FINISHED” for some reason I’m unaware of. After renaming the original script, the ingame text shows up through what is written in the language files, as intended.
On a miscellaneous note: in GZDoom, the text between levels in Heretic says “Entering:”. In the DOS version, it says “Now entering:”. This is accurately reflected in the English language file, though, and thus faithful to the original when displayed ingame.
currentUILevel is now primaryLevel.
For ZScript, currentVMLevel was added. This is also exported as 'level' and will change as needed.
This also means that no breaking deprecations will be needed in the future, because in order to sandbox a level only 4 variables need to be handled: level, players, playeringame and consoleplayer.
The remaining global variables are not relevant for the level state.
The static 'level' has been mostly removed from the code except some places that still need work.
- Allows defining of what actor is replacing another for information.
- If multiple arachnotrons, a modder can attribute them as being a replacer of Arachnotron itself, allowing A_BossDeath and GetReplacee to work with it.
This was always used with 'consoleplayer' which really is the only thing making sense here. But this is a part of the global state which should be avoided in play code.
In particular, this makes no real sense in case of secondary maps where it should always return false.
All these required access to the sector's Level reference.
The remaining references to the global 'level' variable are all in deprecated functions which is ok.
LevelLocals on the left side of.a function call will now always be remapped to 'Level', which will either remap to the same-named instance variable or the global deprecated one.
In a few degenerate cases where there is a conflicting local variable named 'level' it may error out but that is unavoidable here but this is very unlikely.
This had two different flags that were checked totally inconsistently, and one was not even saved.
Moved everything into a few subfunctions so that these checks do not have to be scattered all over the code.
UI always runs on the primary level, so this does not need the ability to operate on multiple levels. Additionally, this can later be set to null when running play code so that scope violations result in an abort.
When player is picked up item that does morph, the corresponding toucher actor is changed in process
Previously, morhing item was removed from original actor leaving player's inventory in inconsistent state
https://forum.zdoom.org/viewtopic.php?t=63124
- upload only the dynamic AABB subtree using glBufferSubData
- change internal raytracing stack limit from 16 to 32
- update shadowmap AABB tree after R_SetupFrame for proper frame interpolation
Unlike the other classes, the places where variables from this class were accessed were quite scattered so there isn't much scriptified code. Instead, most of these places are now using the script variable access methods.
This was the last remaining subclass of AActor, meaning that class Actor can now be opened for user-side extensions.
This was the only code using the ViewBob member variable.
This also moves the range check for this variable to its application, because a badly behaved mod can just as easily change it at run time instead of just setting an absurdly large value in the class definition.
The current behaviour offsets to the front of the actor rather than the side, due to an oversight in the code, which oddly is not present in the A_FireBullets equivalent.
This should be less of a drag on the playsim than having each light a separate actor. A quick check with ZDCMP2 showed that the light processing time was reduced to 1/3rd from 0.5 ms to 0.17 ms per tic.
It's also one native actor class less.
The loop never checked if the item was still valid and would continue to try to use it, even after it was removed from the inventory and destroyed.
As native code this just failed silently, but with the VM it needs to be explicitly checked.
Add 'useowncoloradd_{top,mid,bottom}' sidedef properties to the UDMF
spec
Only use side's additive colors if 'useowncoloradd_(top|mid|bottom)' is
set.
Rename UseOwnColors flag to UseOwnSpecialColors
Add UseOwnAdditiveColor flag to side_t::part
Add EnableAdditiveColor to side_t
Add Side.EnableAdditiveColor to ZScript API
Sector.SetAdditiveColor actually called Sector.SetSpecialColor
Add use boolean property, used to determine whether or not to override the sector's additive wall colour with the side's additive colour.
The new specification is more flexible, and allows assigning additive
colors to individual parts of a sector (walls, sprites, flats) and even
individual parts of a side (top, middle, bottom)
Add AdditiveColors arrays to sector_t and side_t::part
Initialize AdditiveColors arrays to 0
Export AdditiveColors to ZScript
Save AdditiveColors in saved game files
Use colors from AdditiveColors arrays when setting the additive color
for the render state
Add code to parse the new UDMF additive color properties
Remove additive color slot from sector color/part enum
Add SetAdditiveColor to sector_t and side_t
Add GetAdditiveColor to side_t
Export new methods and additive color arrays to ZScript
Rename ColorAdd to AddColor
Add AddColor to FRenderState
Tweak SpecialColors array in ZScript to include the additive color
Add uAddColor to the shader compiler
Add uAddColor to the texel
- TriggerPainChance(Name mod, bool forcedPain)
- One exception: PainThrehold is only checked in ReactToDamage, since this function does not require checking damage amount.
Unlike everything else from the IWADs this had to use the 'light' keyword in ZScript because this is merely a base class for many others and the light definitions here need to be inheritable.
Many uses of random() & value have been turned into random(0, value).
This is not only more efficient, it also ensures better random distribution because the parameter-less variant only returns values between 0 and 255.
