Added, Map Analysis mode: added "Edit Thing..." option to "Unknown Thing" and "Obsolete Thing" error check results.
Added: a warning is now displayed when a thing has both voxel and model attached.
Changed, Thing/Linedef Info panels: unknown ACS script names/numbers are now shown in red.
Fixed, Edit Things window, UDMF: unneeded undo was created when opening the window.
Re-fixed: in some cases invalid sectors were created after dragging map elements when using "Merge Dragged Geometry" and "Replace with Dragged Geometry" drag modes, when at least one of dragged linedef was facing into an enclosed void area (previous fix entirely disabled the associated logic).
Changed, Map Analysis mode: the view is now much more zoomed after clocking on a "Check very short linedefs" error check result.
Removed single testing engine launchable by the editor at once limitation (it worked properly only when using Test map actions anyway).
Fixed: re-did the fix for invalid geometry created when drawing very large grids from R2653, because it caused other issues.
Removed "Adjust heights to match relatively with surrounding sector" option from Preferences -> Pasting, because sector height adjustments are now handled by Edit Selection mode.
Fixed, Sector info panel: in some cases 0 deg. floor/ceiling texture rotation was triggering texture offset/scale/rotation UI parts to be shown.
Fixed even more cases when sidedefs belonging to linedefs, which were moved on top of existing linedefs, were incorrectly reassigned when applying Edit Selection and Drag Geometry modes.
Fixed, Bridge mode: in some cases calculated floor/ceiling heights were not applied to the sectors created by the mode.
Changed, internal: changed program's CurrentCulture to InvariantCulture.
Changed, Map Analysis mode: some checks are now available only under certain conditions (for example, "Check polyobjects" is now available only when the map is in Hexen or UDMF map format).
Updated documentation ("Game Configuration - Basic Settings" page).
Added, Sound Environments mode: current sound environment is now highlighted (can be toggled using "Toggle Highlight" action).
Added: Tag selectors now have up/down buttons.
Fixed, Sound Environments mode: sound environments were not updated after performing Undo/Redo actions.
Fixed, Sound Propagation mode: sound zones were not updated after performing Undo/Redo actions.
Internal: moved "Toggle Highlight" action to the core, also changed it's category to "View".
Internal: "Toggle Highlight" action state is now saved in the Program configuration.
Updated ZDoom_DECORATE.cfg (GetZAt).
Updated ZDoom_linedefs.cfg (Sector_SetPortal args).
Fixed severe lock-up after finishing dragging many vertices/linedefs/sectors in Classic modes.
Updated documentation ("Synchronizing camera position").
Added, Map Analysis mode: Polyobj_ExplicitLine action was not checked by "Check polyobjects" check.
Updated ZDoom_linedefs.cfg and Hexen_linedefs.cfg (polyobject number linedef args now have type 25).
Updated documentation ("Game Configuration - Action Argument Settings").
Changed, Classic modes: bigger Thing arrows are now rendered when thing sprite rendering is skipped.
Changed, Classic modes: when "Fixed Things Scale" option is enabled, thing size stays at 2x scale instead of 1x when extra bounding box is rendered.
Added Preferences -> Appearance -> "Things transparency (Things mode)" slider.
Renamed Preferences -> Appearance -> "Things transparency" to "Things transparency (other modes)".
Externalized thing bounding box and arrow texture, used to render things in Classic modes (Textures/ThingTexture2D.png).
Updated ZDoom_DECORATE.cfg (A_SetUserVarFloat, A_SetUserArrayFloat).
Added, "Check polyobjects" error check: added a check for matching Polyobject and Mirror Polyobject numbers of Polyobj_StartLine action.
Changed, Visual mode: anisotropic filtering is now always applied (previously it was applied only when bilinear filtering was enabled).
Fixed, Visual mode: in some cases light values were incorrectly transferred between 3d floors and regular floors/ceilings.
Fixed, ACS parser: includes for each library must be stored separately (fixes inability to compile a script with an included library, which in turn includes files already included by the script).
Fixed, "Find and Replace" mode: "Find and Replace" window no longer closes when no results are found and Replace mode is enabled.
Changed, "Find and Replace" mode: renamed some search modes for better grouping.
Changed, Game configurations: "Polyobject Anchor" things should not trigger "Thing outside the map geometry" error in the Map Analysis mode.
Updated ZDoom_DECORATE.cfg (A_SetScale).
Fixed, General interface, cosmetic: in some cases the warnings label was disabled in a flashing state (e.g. with red background).
Internal: moved some older GZDB actions form GZGeneral to MapManager. They can no longer be toggled when no map is loaded (which is probably for the best).
Updated ZDoom_ACS.cfg.
Updated ZDoom_DECORATE.cfg.
Fixed, Map Analysis mode: fixed a crash when trying to dissolve an invalid sector when one of it's linedefs referenced it on the both sides.
Fixed, Sectors mode: fixed incorrect undo description when deleting sectors.
Internal: joined declaration and assignment of some more variables.
Fixed: only one test engine should be launched from the editor at any given time.
Changed: SVN builds now include debug symbols.
Internal: VersionFromSVN.exe can now work from a network drive.
Updated ZDoom ACC to git rev. 3071c32.
Updated ZDoom_DECORATE.cfg ("A_Warp").
DECORATE: added "$obsolete" special comment. When present, it marks the thing as obsolete. It will be detected by "Check obsolete thing" Map Analysis Mode check and will be marked in the Thing Properties Window and the Thing Info panel.
Map Analysis mode: added "Check obsolete things" check.
Updated documentation ("DECORATE keys" page).
Updated ZDoom_DECORATE.cfg.
Added "Paste Properties Special" actions in "Classic" and "Visual" categories. They work the same way as "Paste Special" action.
Added: "Copy Properties", "Paste Properties" and "Paste Properties Special" options are now shown in the Edit menu if current classic mode supports them.
Changed, Paste Properties Special window: only options relevant to current map format are now displayed.
Changed, Paste Properties Special window, UDMF: all UI-managed options are now available.
Fixed: MAPINFO parser was unable to process "include" directives.
Fixed, General interface: selection info was reset to "Nothing selected" after few seconds regardless of current selection.
Fixed, Visual mode: thing bounding boxes were not updated when changing things positions using Randomize mode.
Fixed, Visual mode: event lines were displayed at incorrect height when entering Visual mode for the first time.
Fixed, Texture Browser window: when MixTexturesFlats Game Configuration option is disabled, textures/flats are no longer shown in the Used group when flats/textures with the same names are used in the map.
Fixed(?): probably fixed an exception some users reported when trying to initialize a Classic mode after switching from Visual mode with "Sync cameras" option enabled.
Changed, Game configurations, Thing Categories: a block must have at least one thing category property to be recognized as a thing category.
Changed, Visplane Explorer: the plugin now outputs more info when it fails to initialize vpo.dll.
Cosmetic, Thing Edit window, Doom/Hexen map format: adjusted UI layout so thing flags control no longer displays scrollbars in Hexen map format.
Internal: merged methods from UDMFTools into UniFields, removed UDMFTools.
Updated Inno Setup script (added VC++ 2008 SP1 distributive).
Updated ZDoom_DECORATE.cfg (A_CheckBlock).
Updated documentation (added "System Requirements" page).
Changed, Things mode: things are now rendered with a bit of transparency, so things beneath other things are now visible.
Fixed, Things mode: in some cases it was impossible to highlight a thing beneath other thing when their positions were the same.
Changed, 2D modes: changed thing bounding box and arrow image.
Fixed, cosmetic, 2D modes: in some cases thing arrows were rendered bigger than thing bounding boxes.
General interface: selection info is now always displayed.
Visual mode: you can now hold Alt-Shift or Ctrl-Alt while selecting sidedefs to stop selecting connected sidedefs when already (un)selected sidedef is encountered.
Added, Numeric Textbox: you can now use "+++" and "---" prefixes to incrementally increase or decrease result values by given value.
Fixed, Numeric Textbox: fixed a potential divide by zero exception when using "/" prefix in numeric textboxes with decimal input enabled.
Fixed, Thing Info panel: relative z position of things with "+SPAWNCEILING" flag was incorrect.
Changed: Update checker now displays messages using MessageBoxes when called manually.
Map Analysis: changed result descriptions for Unknown Texture and Missing Texture checks.
Doom map format: renamed "Secret" linedef flag to "Shown as 1-sided on automap".
Updated ZDoom_DECORATE.cfg (A_RadiusGive stuff).
Changed, Things, Sectors, Linedefs, Vertices modes: we shouldn't select highlighted map element during the copy action when no map elements are selected.
Internal: removed some debug stuff from CheckTextureAlignment and ResultTexturesMisaligned.
Map Analysis mode: selection color is now used when rendering affected things.
Fixed, Map Analysis mode, "Check unused things" check: checker returned false-positive results when used in Doom map format.
Nodes Viewer mode: added more boilerplate to classic nodes reader.
Thing Filters Form: program configuration was not marked as changed when saving thing filters.
Cosmetic layout fixes in Thing/Linedef/Sector Info panels.
Cosmetic text fixes in several Map Analysis results.
Internal: debug console is now cleared when creating a new map.
Updated ZDoom_DECORATE.cfg.
Statistics control: things count was not updated when adding or deleting things.
Map Analysis mode: "Check texture alignment" is now disabled by default.
Updated Inno Setup script and images.
Added DirectX web installer to Builder\Setup.
Updated MakeRelease.bat.
Updated ZDoom_DECORATE.cfg.
Fixed, Texture Browser Form: well, I broke "Tab" key functionality again (in previous commit)...
Maintenance: changed curly braces style to match DB2 one (hopefully not breaking anything in the process...).
Maintenance: changed private method names casing to match DB2 one.
Map Analysis, internal: some ErrorCheckers and ErrorResult had inconsistent namespaces.
Thing Edit forms, internal: optimized missing flags check a bit.
Game Configurations: moved "thingflagscompare" from Game to Map format blocks. "Check stuck things" check now works properly in Doom/Boom game configurations.
Map Analysis: fixed a possible crash during "Check texture alignment" check.
Map Analysis: ResultStuckThingInLine now highlights both thing and line.
Map Analysis: ResultStuckThingInThing now highlights both things and allows to delete any of them.
Internal, Map Analysis: rewritten parts of "Check stuck things" class.
Internal, Map Analysis: changed the way processed stuff is stored in "Check texture alignment" class.
Internal: changed CurrentDomainOnUnhandledException, so ExceptionDialog with proper info shows up even if adding exception to the Event Log failed.
Internal: changed format, in which thingflagscompare info is stored.
Error Checker mode: added "Check missing flats" check.
Error Checker mode: fixed several descriptions.
Sprite patches for sprites defined in TEXTURES are now loaded from Sprites namespace.
Some of my older texture alignment code didn't work properly when strict texture/flat handling ("mixtextureflats" game configuration flag set to false) was enabled.
Fixed some incorrect checks for missing texture ("-").
Draw Curve Mode: added settings panel.
Sectors mode: added "Make Door" button to the toolbar.
Swapped Side panel and Info panel z-order.
Interface: split toolbar into 3 separate toolbars. All toolbar buttons are now viewable at 1024x768.
Interface: grouped stuff in "Modes" menu a bit better.
Interface: added "Draw [stuff]" buttons to modes toolbar.
Interface: reorganized main menu. Hope it makes more sense now.
API: added General.Interface.AddModesButton() and General.Interface.AddModesMenu(), which can be used to add buttons to specific group in "Modes" toolbar and menu items to specific group in "Modes" menu, so actions, which behave like an editing mode, but are not part of one can be added there.
Map Analysis mode: "Check overlapping lines" now finds duplicate linedefs (e.g. when 2 lines have the same start and end positions).
Map Analysis mode: added "Check overlapping vertices" check. This will check if a vertex is on top of a linedef or another vertex.
Some cosmetic changes in Tools and BaseVisualMode.
Updated zspecial.acs
Error checks: added "Check unused textures" option.
Replaced MissingTexture3D and UnknownTexture3D.
Sectors mode: restored "Lower/Raise Floor/Ceiling by 8 mp" actions.
Visual mode: in some cases sidedefs were rendered as selected when they were not.
Existing linedefs were not split while drawing new lines in some cases.
Texture and height overrides were not applied correctly in some cases.
Preferences form: "Ctrl+Alt+ScrollUp" and "Ctrl+Alt+ScrollDown" dropdown items were setting the shortcut to "Ctrl+Shift+ScrollUp" and "Ctrl+Shift+ScrollDown".
