Sys_LongTime returns time in microseconds as a 64-bit int. Sys_DoubleTime
uses Sys_LongTime, converts to double and offsets 0 time by 4G (2**32).
This gives us consistent sub-microsecond precision for a very long time.
See http://randomascii.wordpress.com/2012/02/13/dont-store-that-in-a-float/
First, this completely smashes joystick input: it will not work (though it
doesn't crash). This is because there is, as of yet, no means to configure
the system.
Each joystick axis has:
- per-axis amplification (both pre and post).
- per-axis offset (offset applied after pre-amp but before post amp)
- selectable destination:
- linear delta: position and angles (as before)
- axis button: if the value crosses the threshold, the given key is
pressed or released as appropriate.
The axis amplification still uses joy_amp and joy_pre_amp (and
in_amp/in_pre_amp), but now also has the per-axis settings.
The per-axis offset is most useful for axis buttons. For example, the xbox
360 controller triggers are analong but go "all the way to negative on 0
state". Offsetting the input keeps axis button thresholds simple.
Amplification and offset is applied before anything is done with the axis
value. The formula is:
joy_amp * in_amp * axis-amp *
(offset + value * joy_pre_amp * in_pre_amp * axis-pre_amp)
Axis button thresholds are very simple: if the sign of the value is the
same as the sign of the threshold and abs(value) >= abs(threshold), the
button is pressed. While multiple thresholds and keys can be placed on an
axis, only one can be pressed at a time. The threshold furthest from 0
wins.
This gives QF a consistent qualilty PRNG on all platforms. The
implementation is slightly different from the standard, but gives the same
results for the same speed (details in mersenne.c).
Now the user can create and destroy IMTs at will, though currently
destroying IMTs is currently all or nothing (imt_drop_all).
An IMT is created via imt_create which takes the keydest name (key_game
etc), the name of the IMT (must be unique for all IMTs) and optionally the
name of the IMT to which the key binding search will fall back if there is
no binding in the current IMT, but must be already defined and on the same
keydest. This means that IMTs now have user determined fallback paths. The
requirements for the fallback IMT prevent loops and other weird behaviour.
Actual key binding via in_bind is unaffected. This is why the IMT name must
be unique across all IMTs.
The "imt" command works with the key_game keydest, but imt_keydest is
provided for specifying the active IMT for a specific keydest.
At startup, default IMTs are setup to emulate the previous static IMTs so
old configs will continue to work (mostly). New config files will be
written with commands to drop all of the current IMTs and build new ones,
with the bindings and active IMT set as well.
This fixes the status bar refresh issues in sw. The problem was that with
two viddef's hanging around, things got a little confused and recalc_refdef
wasn't getting into the renderer.
It turns out gcc on little endian machines didn't guarantee the type of
ShortNoSwap due to it being a macro that just returned its parameter. At
the same time, LongNoSwap and FloatNoSwap have been fixed.
qfcc now does local common subexpression elimination. It seems to work, but
is optional (default off): use -O to enable. Also, uninitialized variable
detection is finally back :)
The progs engine now has very basic valgrind-like functionality for
checking pointer accesses. Enable with pr_boundscheck 2
Getting everything right with an enum proved to be too difficult if not
impossible. Also use better tests for equivalence and intersection.
Many more tests have been added. All pass :)
Also move the ALLOC/FREE macros from qfcc.h to QF/alloc.h (needed to for
set.c).
Both modules are more generally useful than just for qfcc (eg, set
builtins for ruamoko).
The depth limits in the gl and glsl renderers and in the trace code really
bothered me, but then the fix hit me: at load-time, recurse the trees
normally and record the depth in the appropriate place. The node stacks can
then be allocated as necessary (I chose to add a paranoia buffer of 2, but
I expect the maximum depth will rarely be used).
The attached patch (against quakeforge git) changes the [con]width,
[con]height, and most importantly the rowbytes members of viddef_t
from unsigned to signed int, like in q2. This allows for a properly
negative vid.rowbytes which may be needed in, e.g. a DIB sections
windows driver if needed. Along with it, I changed a few places
where unsigned int is used along with comparisons against the relevant
vid.* members.
One thing I am not 100% sure is the signedness requirements of
d_zrowbytes and d_zwidth: q2 has them as unsigned but I am not sure
whether that is because they are needed as unsigned or it was just an
oversight of the id developers. They do look like they should be OK
as signed int to me, though: comments?
==
Note from Bill Currie: I had to do some extra changes as many
signed/unsigned comparisons were somehow missed.
All of the nastiness is hidden in bspfile.c (including the old bsp29
specific data types). However, the conversions between bsp29 and bsp2 are
implemented but not yet hooked up properly. This commit just gets the data
structures in place and the obvious changes necessary to the rest of the
engine to get it to compile, plus a few obvious "make it work" changes.
This should make maintaining them a little easier.
The copyright block in most of the new headers (execpt vector.h) reflect
when the functions in the relevant header were first created.
Really, when cl_nodelta is in effect (eg, .qwd demo recording and thus
playback). QW now uses the new shared entity state block as I'd intended.
Thanks to the cleanup of ghost entities (ie, entities that have been
removed but continue to be rendered), glsl overkill has gone from 157 to
163 fps :)
It turns out glsl, sw and sw32 weren't getting any benefit from R_CullBox
because the frustum wasn't setup :P. Get another 8% out of bigass1
(174->184fps). bigass1 now runs 2x as fast as it did before I started this
optimisation run :)
This severely reduces the calles to BindTexture, and more importantly,
glUseProgram, EnableVertexAttribArray etc. The biggest changes are:
o icons and text are all in the one giant texture
o icons and text are mixed in the one queue
This gave ~9% speedup for bigass1 (159->174fps).
For certain values of "fix" ;). Both are brought back to life but
idealpitch is never set (always 0) and veiwheight is set in V_RenderView().
However, this brings the rest of the code in cl_view.c just that little bit
closer to merged :)
I didn't like the way client/server code was poking around at the
implementation. Instead, provide a couple of accessor functions for the
same information.
gl, sw and sw32 use blend palettes, so share the code. This also abandons
the optimization for transforming verts in sw (had all sorts of problems
anyway). sw still doesn't work, though.
There are still many issues to sort out, but the basics are working.
Problems:
rendered fullbright (no lighting done)
normals are ignored
extra textures (glow etc) not used/loaded
4 models on the screen don't seem to be a problem.
Since iqm vertex arrays are variable, and I don't want to calculate the
stride every time I render a model, cached the value used when building the
arrays.
VectorUnshear uses the exact same shear vector to remove shear from a
sheared vector. ie with:
VectorShear (shear, v, w);
VectorUnshear (shear, w, x);
x == v within fp math limits.
And the tests really exercised VectorShear (first attempt had things
messed up when more than one shear value was non-zero). Also,
Mat4Decompose wasn't orthogonalizing the z axis row. Oops. Anyway,
Mat4Decompose is now known to work well, and the usage of its output is
understood :)
I'd gotten the norm and magnitude mixed up (partly because the document I
was following got the names mixed up), and then munged the formulas
together.
Now it doesn't matter if you get 22 fps or 72, you jump the same height,
which actually happens to be slightly higher than the previous 72fps jump.
Effectively, you jump the height you would if you got infinite fps ;)
I got the idea from blender when I discovered by accident that quat * vect
produces the same result as quat * qvect * quat* and looked up the code to
check what was going on. While matrix/vector multiplication still beats the
pants off quaternion/vector multiplication, QuatMultVec is a slight
optimization over quat * qvect * quat* (17+,24* vs 24+,32*, plus no need to
to generate quat*).
This avoids sending invalid pose data to the renderer. The symptom was a
vertex array offset higher than the vertex array size. Discovered by calim
of nouveau while he was debugging a driver problem found by QF. Many
thanks.
This allows the vid module to load the render module and access render
specific functions before the renderer initializes, which happens to need
an initialized vid module...
The renderer now gets initialized and things sort of work (qw-client will
idle, though nothing is displayed). However, as the viddef stuff is broken,
it segs on trying to run the overkill demo.
