- engine.c: comment out some unused decls with RELEASE=0 DEBUGANYWAY=1
- Lunatic: update dump.lua and v.lua
- Lunatic: test/test_geom.lua: note a perf regression (wrt older LuaJIT,
or I mis-configured / built something wrong)
git-svn-id: https://svn.eduke32.com/eduke32@4048 1a8010ca-5511-0410-912e-c29ae57300e0
(Auto-insertion of an inner sector from a loop happens either because the loop
is created in an extended sector, or because it has been punched through a
ceiling/floor into the upper/lower neighbor sector.)
git-svn-id: https://svn.eduke32.com/eduke32@4033 1a8010ca-5511-0410-912e-c29ae57300e0
- add gv.GET, gv.WEAPON, gv.RETURN
- specify that sprite[].x/y/z and wall[].x/y are 32-bit ints
- add an example for con.longjmp()
- add an appendix listing the RETURN usage of various events
git-svn-id: https://svn.eduke32.com/eduke32@4032 1a8010ca-5511-0410-912e-c29ae57300e0
On the C side, keep the name g_RETURN. I'm still superstitious about
dropping the "g_".
git-svn-id: https://svn.eduke32.com/eduke32@4031 1a8010ca-5511-0410-912e-c29ae57300e0
Note: the wall line will not light up periodically, but point insertion will
be possible nontheless. A bit inconsistent, but I didn't want to do a full
analysis of which side effects allowing a sprite highlight and a line highlight
to coexist at the same time would have.
git-svn-id: https://svn.eduke32.com/eduke32@4026 1a8010ca-5511-0410-912e-c29ae57300e0
This makes CLANG=1 RELEASE=0 DEBUGANYWAY=2 OPTLEVEL=1 builds definitely pretty
playable (only Polymost tested) while having a decent amount of sanitization.
git-svn-id: https://svn.eduke32.com/eduke32@4020 1a8010ca-5511-0410-912e-c29ae57300e0
Redundant for the same reason as the preceding one: the pointer has already
been dereferenced at the point the check is made. Also, all 5 calls of that
function pass a valid pointer (provided the pointers from which the expressions
are derived are valid). Reported by Stack, too.
git-svn-id: https://svn.eduke32.com/eduke32@4017 1a8010ca-5511-0410-912e-c29ae57300e0
The check is dead because it is made after the fact (oob access), but the
cheat string matching logic below actually assures that
cheatbuflen < sizeof(cheatbuf) at all times.
Exposed using the Stack tool from http://css.csail.mit.edu/stack/ .
Also, in gamedef.c's definecheat handling, print the string length (19), not
the buffer length (20) if the cheat was truncated.
git-svn-id: https://svn.eduke32.com/eduke32@4016 1a8010ca-5511-0410-912e-c29ae57300e0
Clang's UBSan reports this as undefined behavior. I think that the reason
is as follows: C99 6.5.3.2#1 (Constraints) says:
The operand of the unary & operator shall be either a function designator, the
result of a [] or unary * operator, or an lvalue that designates an object that
is not a bit-field and is not declared with the register storage-class specifier.
But in case of an expression like "&array[-1]", the operand ("array[-1]") does
not designate a valid object.
Moral: check first -- assure that an expression is valid for a particular
operation before carrying it out. Keep in mind that otherwise, the compiler
is absolutely free to optimize out the *check*.
git-svn-id: https://svn.eduke32.com/eduke32@4014 1a8010ca-5511-0410-912e-c29ae57300e0
Again, in case a bunch is discarded. The tags would appear as really tagging
the walls instead of being "hidden".
git-svn-id: https://svn.eduke32.com/eduke32@4012 1a8010ca-5511-0410-912e-c29ae57300e0
That is, if a bunch is discarded when copying a sector to the clipboard.
(This happens if not all sectors that are part of the bunch are copied.)
git-svn-id: https://svn.eduke32.com/eduke32@4011 1a8010ca-5511-0410-912e-c29ae57300e0
Don't touch TerminX's r_usetileshades==1 or it being the default.
git-svn-id: https://svn.eduke32.com/eduke32@4010 1a8010ca-5511-0410-912e-c29ae57300e0
- For setting 1, don't draw them for red walls whose sector floors have equal
height.
- Make setting 1 the default, because I consider drawing them for such walls
(and white walls) noise (as opposed to information). The "verbose" setting 2
is still available.
git-svn-id: https://svn.eduke32.com/eduke32@4007 1a8010ca-5511-0410-912e-c29ae57300e0
DONT_BUILD, because there have been no significant changes of the non-Lua build.
git-svn-id: https://svn.eduke32.com/eduke32@4006 1a8010ca-5511-0410-912e-c29ae57300e0
In foreachmap.lua, make init() be able to return a start index for cmdline args,
for the case where the run worker script wants to handle options, for example.
git-svn-id: https://svn.eduke32.com/eduke32@4005 1a8010ca-5511-0410-912e-c29ae57300e0
- libs and headers are expected in platform/Windows/* (not there yet)
- prefix Lua #includes with luajit-2.0/
- build bytecode objects with absolute path name (used for debug info)
git-svn-id: https://svn.eduke32.com/eduke32@4000 1a8010ca-5511-0410-912e-c29ae57300e0
- Use the proper tile sequence when multiple pskies are present in a map.
However, there's still only *one* psky chosen at map load time.
- Handle three horizfrac cases:
* 0, psky always at same level wrt screen
* 65536, psky horiz follows camera horiz (e.g. E4L9)
* otherwise, fall back to default hard-coded parallax implemented as an
angle fraction
git-svn-id: https://svn.eduke32.com/eduke32@3977 1a8010ca-5511-0410-912e-c29ae57300e0
- Rename sky_t members: yscale -> horizfrac, bits -> lognumtiles.
- Add default sky (8 tiles, horizfrac=32768 (i.e. 1/2 the scene horiz), offsets
all zero) and CLOUDYOCEAN sky (8 tiles, horizfrac=65536, offsets all zero)
to multipsky[].
- Get rid of "psky_t g_psky", merely maintaining a g_pskyidx instead. Set it up
at map load time so as to keep the behavior of the legacy per-map psky:
the last sector index with a matching psky ceiling wins.
- In mapstate_t, save g_pskyidx too, not (former) pskybits and pskyoffs[].
- Make on-map-load global psky setup consistent for the game and editor by
factoring it out into common.c: G_SetupGlobalPsky().
- Remove a couple of useless initializations, add some static assertions.
This commit is more likely to introduce subtle differences in behavior.
Specifically, getpsky() now always returns the default sky properties instead of
the global sky ones (but with all-zero offsets) when no match for a suiting
multi-psky is found. This is only likely to affect the yscale/horizfrac of
non-multi-pskies when a global non-default multi-psky has been set up.
Bump BYTEVERSION again.
git-svn-id: https://svn.eduke32.com/eduke32@3976 1a8010ca-5511-0410-912e-c29ae57300e0
- Consolidate psky* arrays into a "typedef struct psky_t" "g_psky" and
"multipsky[]".
- Factor out getting parallaxed sky properties into getpsky().
- Condense initial multi-psky setup by memcpy'ing from multipsky[].
- New function: MultiPsky_TileToIdx().
- Add new define PSKYOFF_MAX and related consistency-checking assertions.
- Lower MAXPSKYTILES to 8 to reflect current usage (was 256).
- Game: make multi-pskies consider dynamically-remapped MOONSKY1, BIGORBIT1
and LA. (Not very useful as the editor will still only act for the static
values -- 80, 84 and 89, respectively.)
An attempt has been made to preserve behavior even in strange cases, so this
commit is unlikely to introduce regressions. Because of point 6, BYTEVERSION
had to be bumped.
git-svn-id: https://svn.eduke32.com/eduke32@3975 1a8010ca-5511-0410-912e-c29ae57300e0
- Allow xoffset and yoffset to modified independently of a tile definition, much like texhitscan and nofullbright.
(Both still default to zero when a tile is specified, to keep current behavior, and because it makes sense.)
- Add actual detection of the "nofullbright" keyword, which appears to have been overlooked in r3230.
- Internal: Eliminate the need for one int32_t by condensing two variables into "flags".
git-svn-id: https://svn.eduke32.com/eduke32@3973 1a8010ca-5511-0410-912e-c29ae57300e0
The old extension is an artifact from when I was thought that extensions
should label whether a Lunatic module is to be used in internal/external
contexts.
Also, change test.lua slightly and commit a little updated documentation.
git-svn-id: https://svn.eduke32.com/eduke32@3969 1a8010ca-5511-0410-912e-c29ae57300e0
Its members are already laid out on the natural alignment boundaries.
Compilation tested with {32-bit, 64-bit} x {Lunatic, non-Lua} builds.
git-svn-id: https://svn.eduke32.com/eduke32@3968 1a8010ca-5511-0410-912e-c29ae57300e0
It didn't turn out that useful and was giving a warning with one of the
preceding changes.
git-svn-id: https://svn.eduke32.com/eduke32@3963 1a8010ca-5511-0410-912e-c29ae57300e0
Also, very slightly tweak a factor toward a "brighter" (farther visible)
scene overall to account for the "circular" nature of the fragment distance
(as opposed to an "ortho" distance in Build).
git-svn-id: https://svn.eduke32.com/eduke32@3962 1a8010ca-5511-0410-912e-c29ae57300e0
It was only ever used as upper bound to the time that a visibility change
decays, but since it does that in an exponential fashion, there's really
no point.
git-svn-id: https://svn.eduke32.com/eduke32@3961 1a8010ca-5511-0410-912e-c29ae57300e0
Now, if p->visibility differs from the constant visibility, the former converges
toward the latter by three-quartering the difference each second totalclock
increment (1/60th second).
Negative player visibilities are not handled consistently throughout the
different renderers, so make it look the same as 0 (can view to infinity).
git-svn-id: https://svn.eduke32.com/eduke32@3960 1a8010ca-5511-0410-912e-c29ae57300e0
So there's no "jump" from vis!=0 to vis=0 making the texture appear brighter.
git-svn-id: https://svn.eduke32.com/eduke32@3959 1a8010ca-5511-0410-912e-c29ae57300e0
Also, in test.elua, add a currently failing must-fail test (i.e. it wrongly
succeeds where it should not!).
git-svn-id: https://svn.eduke32.com/eduke32@3954 1a8010ca-5511-0410-912e-c29ae57300e0
Because that function might have inserted tsprites itself, e.g. for the fake
floor shadow. Also add one "spritesortcnt < MAXSPRITESONSCREEN" bound check
in legacy ROR code.
git-svn-id: https://svn.eduke32.com/eduke32@3952 1a8010ca-5511-0410-912e-c29ae57300e0
Smoothed using an exponential moving average... with a time constant of 1 sec
if I didn't miscalculate things. Also, split BYTEVERSION_JF into Lunatic and
non-Lua.
git-svn-id: https://svn.eduke32.com/eduke32@3947 1a8010ca-5511-0410-912e-c29ae57300e0
The base name is taken from the environment variable LUNATIC_TIMING_BASEFN,
which is suffixed with .actors.csv and .events.csv.
git-svn-id: https://svn.eduke32.com/eduke32@3946 1a8010ca-5511-0410-912e-c29ae57300e0
That is, for shade of objects, use shade tables. For visibility, use GL fog.
Mixing these two does not produce satisfactory results in areas where both
shade and visibility darkening are high, such as around the E1L1 restroom.
git-svn-id: https://svn.eduke32.com/eduke32@3941 1a8010ca-5511-0410-912e-c29ae57300e0
- 'copy' may have them as source, 'getarraysize' works fine
- 'setarray' and 'resizearray' are obviously forbidden
- 'readarrayfromfile' and 'writearrayfromfile' is not implemented for them
(use case?)
Also, in the Makefile: don't use realpath on directories. It may give an empty
string.
git-svn-id: https://svn.eduke32.com/eduke32@3940 1a8010ca-5511-0410-912e-c29ae57300e0
Don't yet make this official API though, since there are unresolved issues
with newly created tsprites potentially being fed back to the animation loop.
Add xmath.angvec(), xmath.bangvec(), tspr:set_sectnum(), tspr:setpos().
git-svn-id: https://svn.eduke32.com/eduke32@3937 1a8010ca-5511-0410-912e-c29ae57300e0
- check map-text version on load
- LunaCON: don't allow (back)slash as identifier char
- LunaCON stand-alone: don't resort to default directory for root file names
- document non-local control flow functions and for LunaCON, ambigious lexical
elements
git-svn-id: https://svn.eduke32.com/eduke32@3933 1a8010ca-5511-0410-912e-c29ae57300e0
Having to tag these few variables and functions as ATTRIBUTE((used))
seems sensible, but what follows is just strange. OSD_Printf? headspritesect?
git-svn-id: https://svn.eduke32.com/eduke32@3932 1a8010ca-5511-0410-912e-c29ae57300e0
- swap 2d and 3rd args in xmath.rotate() -- now rotate(point, ang, pivot)
- add vec3 method 'rotate', calling xmath.rotate
- store game tic count in savegames
git-svn-id: https://svn.eduke32.com/eduke32@3929 1a8010ca-5511-0410-912e-c29ae57300e0
- some renames of functions/methods
- con.actorvar: explicitly allow (for now) boolean and number values
- added gv.gametic, player.holdskey(), player.all(), actor.check*()/hit*(),
gv.rendmode, gv.REND, <bitint>:mask(), spr:getheightofs()
- make read of nil var in "finalized" (live) module produce error, too
- add test/helixspawner.lua
git-svn-id: https://svn.eduke32.com/eduke32@3928 1a8010ca-5511-0410-912e-c29ae57300e0
Also, in some movement functions, replace e.g. (vel*TICSPERFRAME)>>2 with vel.
git-svn-id: https://svn.eduke32.com/eduke32@3925 1a8010ca-5511-0410-912e-c29ae57300e0
E.g. con.action{0, 4, delay=20}; for convenience, viewtype and incval are
initialized to 1 (not 0) here.
git-svn-id: https://svn.eduke32.com/eduke32@3923 1a8010ca-5511-0410-912e-c29ae57300e0
That is, its value was only referenced during the duration of a function call
that had previously set it. It was also never accessible from CON.
git-svn-id: https://svn.eduke32.com/eduke32@3921 1a8010ca-5511-0410-912e-c29ae57300e0
Using macros like AC_COUNT(t). Clean up related code:
- comment out the dead condition noted in the previous commit
- Lunatic: use get_count() instead of get_t_data(0) in one place,
rename to _get_t_data(), i.e. make that method internal
git-svn-id: https://svn.eduke32.com/eduke32@3920 1a8010ca-5511-0410-912e-c29ae57300e0
... due to making hi/lotag unsigned in r3174. This commit keeps the compiler
warning, the next one will remove it.
git-svn-id: https://svn.eduke32.com/eduke32@3919 1a8010ca-5511-0410-912e-c29ae57300e0
Add testing code for an example actor 1275 (newspaper) to test.elua.
git-svn-id: https://svn.eduke32.com/eduke32@3918 1a8010ca-5511-0410-912e-c29ae57300e0
Also, get rid of the strange filename[len]=255 hack in loadboard()
and make its file name arg const char* at last.
git-svn-id: https://svn.eduke32.com/eduke32@3913 1a8010ca-5511-0410-912e-c29ae57300e0
Also, clean up the saving/loading logic a bit:
- On load failure, display message with purple color.
- Take over the current file name ('boardfilename') only on success.
- Check SaveBoard() return values in various places.
git-svn-id: https://svn.eduke32.com/eduke32@3911 1a8010ca-5511-0410-912e-c29ae57300e0
In other words, for a test rectangular sector, a sprite would be inside the
sector in on all 4 edges and all 4 corners. Previously, it would have been
the lower right portion only (*excluding* LL and UR corners), which led to
map editing issues.
git-svn-id: https://svn.eduke32.com/eduke32@3898 1a8010ca-5511-0410-912e-c29ae57300e0
The main thing to note is the "half-open" nature of the x/y range checks.
git-svn-id: https://svn.eduke32.com/eduke32@3897 1a8010ca-5511-0410-912e-c29ae57300e0
- Pass original module name (dot=dirsep) to module via our require()
- geom.lua: fix some operations using the vector type constructor
- geom.lua: provide constructor for ivec3, useable like vec3
git-svn-id: https://svn.eduke32.com/eduke32@3894 1a8010ca-5511-0410-912e-c29ae57300e0
Also, an external 'minitext' with optional shade and pal. args and
documentation for ps:padecol().
git-svn-id: https://svn.eduke32.com/eduke32@3893 1a8010ca-5511-0410-912e-c29ae57300e0
