- (int ptr = AAPTR_TARGET, state high, state low, float offsethigh = 0, float offsetlow = 0, bool includeHeight = true)
- Jumps if the pointer of the calling actor is higher or lower than itself, adding offsethigh or offsetlow depending on the circumstance.
- includeHeight works twofold.
- Includes the height of the calling actor if the pointer is higher to truly determine if they are completely above them or not.
- Includes the height of the pointer if the pointer is lower.
- Disable it to only check z differences without adding height.
Introduce AActor::TakeInventory, which unifies DoTakeInv from ACS and DoTakeInventory from Decorate, and AInventory::DepleteOrDestroy, which is extracted from the DoTakeInv core function, and use both where they're needed.
I don't know if the differences between DoTakeInv and DoTakeInventory were intentional, so I kept both behaviors.
* make setting the line ID with P_TranslateLineDef explicit because there's one FraggleScript function that needs to work around the changes caused by this. There's also some functions setting only a temporary linedef. These would inevitably cause problems if the underlying data gets changed.
* remove FS function 'ChangeTag'. Fortunately this was just some long forgotten test stuff that can be removed without affecting any maps, but the feature would cause some serious problems in a more complex system.
With these changes it is guaranteed that after map setup the tag/ids won't change anymore.
- Fixed: P_MoveThing had source and destination fog spawning backwards.
- Fixed a case where the NOTELEPORT flag would be ignored on A_Teleport.
- Added pointer selection to A_Teleport. Defaults to AAPTR_DEFAULT (calling actor). State jumps will only be done by the calling actor.
* Changed the behavior of SetActorTeleFog.
- Don't force "null" to resolve to no actor since "none" is already defined as NULL (via FindClass). (This change also applies to the decorate properties.)
- Passing an empty actor name will keep the existing fog since there's otherwise no way set only one fog. Since "none" works to remove the fog, I see no reason not to have this option.
- Don't force "null" to resolve to no actor since "none" is already defined as NULL (via FindClass). (This change also applies to the decorate properties.)
- Passing an empty actor name will keep the existing fog since there's otherwise no way set only one fog. Since "none" works to remove the fog, I see no reason not to have this option.
- Converting the wave speed back to floats, since I'm using sin() instead
of the finesine table now.
- Pre-shift the quake intensities to avoid extra shifting in GetModIntensity.
- Loading old saves will shift the intensities to fixed point but will not
convert the fixed wave speeds to floats. The chances of this
being in a savegame where the speeds are non-zero is pretty much nil,
and int and floating point 0 are bitwise identical (not counting -0.0).
- Squashed commit of the following:
commit bc45fe3263d34ef5f746f524687999c19bf7b779
Author: Randy Heit <rheit@users.noreply.github.com>
Date: Sun Mar 1 18:51:05 2015 -0600
wave scale -> wave speed
commit ff96388b128c724c1198757bfa52f1935a263356
Author: Randy Heit <rheit@users.noreply.github.com>
Date: Sun Mar 1 18:45:32 2015 -0600
More sine quake fixes
commit 2a89749a6fe6d271b9fbdc218779f680afcf4cb6
Merge: 719dfbe 5456074
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sat Feb 28 20:37:22 2015 -0600
Added QF_WAVE to A_QuakeEx.
- Changes the random quakes into a sine wave (see Shadow Warrior/Rise of the Triad reboots, Hard Reset, etc.)
- Added 3 properties to control waves per second along each individual axis. Only works with QF_WAVE.
- Intensity X/Y/Z property becomes the amplitude of the wave.
- Stacks with regular quakes, allowing shaking along the camera which must be called using A_QuakeEx WITHOUT the flag, or the other quaking functions.
- Uses the youngest quake's time for positioning.
commit 54560741581e8d15cc7060e8e068cf85e9a4b432
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sat Feb 28 20:21:19 2015 -0600
Recommitted recommended changes by Randi, with some modifications. Now, we should be finished!
commit 6f4473013411686d88fc185bdc1cc58b1035b0f1
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sat Feb 28 12:52:57 2015 -0600
Finish this revert.
commit 467e53f9400f588a2ada9b32e7634cb1f4ad5066
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sat Feb 28 12:46:02 2015 -0600
Reverted back to what was working.
commit da9de56a67efda08036e481fd5fccd5392ce6810
Author: MajorCooke <paul.growney22@gmail.com>
Date: Thu Feb 26 18:53:20 2015 -0600
Forgot this bit, for testing.
commit c5093d9bb97caf8478cefc32abc56a036feeea58
Author: MajorCooke <paul.growney22@gmail.com>
Date: Thu Feb 26 18:52:46 2015 -0600
Some more progress, but...
- This did not solve anything. In fact, it did the opposite -- completely broke wave quakes. Now they only happen whenever a random quake is in progress.
- Left in the commented code on purpose so Randi can test it.
commit 7e526405d2127cbb279f66008c8f8e55a5d497f3
Author: MajorCooke <paul.growney22@gmail.com>
Date: Wed Feb 25 17:50:42 2015 -0600
- Use newest waveform timer, not oldest.
commit 1356443609dbc6c7f46e081d0846816dc0836124
Author: MajorCooke <paul.growney22@gmail.com>
Date: Wed Feb 25 17:32:09 2015 -0600
- Got regular quakes to multiply onto sine quakes, but the vice versa needs fixing too.
commit d95796c94c70cd0229d4a6d30f69e3a7568b9588
Author: MajorCooke <paul.growney22@gmail.com>
Date: Wed Feb 25 16:46:21 2015 -0600
- Last hurdle. Now just need to figure out how to properly scale up and down.
commit 4bc3458e689155ce72c09776604d9eb4fa73d8be
Author: MajorCooke <paul.growney22@gmail.com>
Date: Tue Feb 24 23:18:03 2015 -0600
- Fixed the quakes being unstackable.
commit b51012d6d4ea065bf7f6fc9c1a0472966491f7af
Author: MajorCooke <paul.growney22@gmail.com>
Date: Mon Feb 23 23:48:34 2015 -0600
QF_WAVE renamed from SINE.
- Lots of ground covered, but still more to go.
- Still need to figure out how to make the camera properly shudder.
commit 427e4893193470bbf45415ffec70a0b69b8cccfd
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sun Feb 22 16:52:30 2015 -0600
- Begin the groundworks for QF_SINE.
- Need to figure out how to rework and manipulate the sine wave to move faster, and to allow going below 0 without breaking it too much.
- This is RandomPick but for floats. Considering what RandomPick
translates into in the scripting branch, I hope I don't regret not using
type inference on RandomPick instead of creating a new keyword.
- Unlocks the full potential of using quakes, including the Z axis. Each intensity applies to X/Y/Z planes whenever a player is experiencing it.
- Flags:
- QF_RELATIVE - Adjusts the quaking of the camera to go in the direction its aiming (X: forward/backward. Y: Left/right.)
- Plans for including pitch will be implemented in the future for the Z axis with relativity.
- "If it ain't broke, don't fix it."
- Some of the changes were downright wrong and some were pointless, so undo
everything that doesn't look like an actual improvement.
This reverts commit a4c07a9ee3.
- This commit touched every line of thingdef_codeptr.cpp, which would make
merging it into the scripting branch a pain in the ass.
- The error "You cannot pass parameters to..." used the most recent token,
which was always ( and not the function name. (Note that this was
already fixed in the scripting branch, so this is probably going to be a
conflict. Meh.)
- Added A_Warp flags:
- WARPF_BOB: Gets the bob offset of actor pointer with the FLOATBOB flag.
- WARPF_MOVEPTR: The function is inversed to move the pointed actor with applied flags, but only the original caller will make the success/jump.
- Rippers will rip through anything with an equivalent ripper level, or if their level is between or on the min and max ranges.
- If no min or max is defined, it simply checks if the monster's ripper level is lower than the missiles.
- Functions: A_SetRipperLevel(int level), A_SetRipMin(int min), A_SetRipMax(int max)
- Properties: RipperLevel, RipLevelMin, and RipLevelMax.
- RipperLevel: Applicable to monsters and projectiles.
- RipLevelMin and RipLevelMax are only useful on monsters.
- By default, all are 0.
- Do a filter and species check first to save time.
- Added DMSS/KILS/RMVF_EITHER, which means if the actor is of type or species, it counts.
- A_DamageTarget(20,"Normal",DMSS_EITHER,"DoomImp","CyberdemonSpecies")
- This affects actor DoomImp, and anything that's of species CyberdemonSpecies.
- Added a little more documentation via comments.
- Added two more flags for each of the functions, EXFILTER and EXSPECIES.
- Stands for "exclude filter/species" and makes the function not take them into account.
- Cleaned up the code and placed all the checking in their own subfunctions.
- The wiki said the minimum distance to teleport defaults to 0, actor.txt on the other hand said otherwise. I was wondering why it was still broken somewhat...
- Prevent stickiness from happening, a.k.a. getting stuck in ceiling or floor and letting the engine unstick the actor. This caused velocity loss.
- TF_KEEPVELOCITY: Keep the velocity after teleporting.
- TF_KEEPANGLE: Don't use the special spot's angle.
- TF_USESPOTZ: Normally, this function
- TF_NOSRCFOG: Don't leave fog at the previous location.
- TF_NODESTFOG: Don't leave fog at the arriving location.
- TF_USEACTORFOG: Use the actor's TeleFogSourceType and TeleFogDestType properties.
- TF_NOJUMP: Don't require or cause a jump. In this case, put 0 (or "") in for the jump destination when using CustomInventory items to teleport actors around.
- Instead of reverting the teleport fog back to defaults, if there wasn't a class or if the class failed to be found, set it to NULL.
- P_SpawnTeleportFog will not spawn anything if it's NULL.
- Added "" so it can be used to mean 'don't change anything' for A_SetTeleFog.
- New properties include TeleFogSourceType and TeleFogDestType.
- TeleFogSourceType is the fog left behind where the actor teleported away from.
- TeleFogDestType is the fog the actor sees when it arrives at its destination.
- Added A_SetTeleFog(<oldpos>,<newpos>) -- oldpos sets TeleFogSourceType, newpos sets TeleFogDestType.
- CLOFF_SETTARGET | CLOFF_SETMASTER | CLOFF_SETTRACER
- An actor that causes A_CheckLOF (and only an actor) to succeed will set the intercepting actor as its target, master, and/or tracer, respectively.
- HITTARGET, HITMASTER, and HITTRACER.
- A missile that dies hitting an actor will set this impacted actor as the new target/master/tracer, depending on specifications.
- Added THRUREFLECT, MIRRORREFLECT, and AIMREFLECT. All require REFLECTIVE to work.
- THRUREFLECT prevents missiles from changing course if reflected, and takes precedence over all reflective flags.
- MIRRORREFLECT causes missiles to perform a direct 180 turn-around.
- AIMREFLECT turns the missile back to the original shooter, and does not slow the missile down.
- FTF_REMOVE: Removes the actor when the alpha hits a certain level.
- - A_FadeIn - 1.0
- - A_FadeOut - 0.0
- - A_FadeTo - Alpha target level reached
- FTF_CLAMP: Automatically fixes the alpha so it won't leave the range [0.0, 1.0].
-Fixed: ALLOWPAIN should not trigger pain states if the damage is 0, but still allow for infighting to occur.
-Fixed: an unneeded logic call was processing damage modification when it was 0 to begin with.
