Fixed, Visual mode: in some cases not all sidedef geometry was updated when updating sectors with Plane Align (181) action. Also fixed some more unnecessary geometry updates.
Fixed, Linedefs mode, Things mode: in some cases deleting linedefs/things caused a crash when trying to update text labels.
Fixed, Draw Lines mode: in some cases the drawing was prematurely finished when "Auto-finish drawing" option was enabled.
Changed, Draw Lines mode: line angles are now shown only when "Show guidelines" mode is enabled.
Fixed, Draw Lines mode: in some cases "Snap to cardinal directions" mode was snapping only to diagonals.
Fixed, Draw Lines mode: snap to geometry behaved incorrectly when "Snap to cardinal directions" mode was enabled.
Changed, Things mode: dynamic light shape is now drawn using highlight color when a dynamic light thing is highlighted.
Added more sanity checks to MODELDEFS parser.
Fixed, Things mode: in some cases selection labels were not updated after editing a thing.
Fixed, Things mode: selection labels were positioned incorrectly on things with FixedSize setting.
Fixed, Sectors mode: fixed a crash when selecting self-referencing sector when selection labels were enabled.
Fixed, Visual mode: in some cases Auto-align texture actions were not working when "use long texture names" Map Options setting was enabled.
Fixed, MD2/MD3 loader: available animation frames upper bound check was performed incorrectly, which would cause a crash in some very special cases.
Fixed, Game configurations: most Hexen/ZDoom teleport actions use TeleportDests as teleport targets, not MapSpots.
Added, Draw Line and Draw Curve modes: added "Auto-finish drawing" setting. When enabled, the modes will automatically finish drawing when currently drawn lines and already existing level geometry form a closed shape.
Changed: sector-wise linedef flipping is now done using the new "Align Linedefs" action. "Flip Linedefs" action works the same as in DB2 again.
Changed: when a map was already loaded, using "Open Map" action will use that map's directory as the starting directory.
Changed: official IWADs can no longer be saved.
Changed: disabled lump ranges/duplicate entries checks for official IWADs.
Changed: wad type is now preserved when saving a map (previously all wads were saved as PWADs).
Changed: moved Updater.exe launch much closer to the editor termination point to avoid any chance of it closing the editor before it properly closes itself.
Updated ZDoom_DECORATE.cfg (A_Blast).
Updated documentation.
Fixed, Visual mode: in some cases GLDEFS glow effect was not updated after changing floor/ceiling texture.
Fixed, Draw Rectangle and Draw Ellipse modes: in some cases pressing "Reset" button did not update the shape preview.
Fixed, DB2 bug: sector geometry was not updated after undoing "Flip Sidedefs" action.
Fixed, Tags selector, UDMF: tags from sector with the longest array of tags was applied to sectors with shorter arrays of tags.
Fixed, Draw Settings panel: sidedef texture overrides were not applied when "Auto-clear sidedef textures" setting was enabled.
Added, Thing Edit window, UDMF: added "Show user-added custom fields only" checkbox.
Fixed, General interface, cosmetic: in some cases the warnings label was disabled in a flashing state (e.g. with red background).
Internal: moved some older GZDB actions form GZGeneral to MapManager. They can no longer be toggled when no map is loaded (which is probably for the best).
Updated ZDoom_ACS.cfg.
Updated ZDoom_DECORATE.cfg.
Fixed, Visual mode: "Select with the same texture" action should not select invisible geometry (like sidedef parts hidden by slopes).
Changed, Sector drawing: default sector height is now used when the nearest sector's height is <= 0.
Added "Toggle sky rendering" action and toolbar button.
Added, MAPINFO parser: the editor now recognizes map number from classic map definition format. Hexen MAPINFO is now properly parsed.
Added, MAPINFO support: if current map definition contains map name as a text string, it will be shown in the editor's header.
Changed: "Toggle dynamic lights rendering" now toggles between "Don't show dynamic lights" and "Show dynamic lights" when used in Classic modes.
Changed, Things mode: lowered the opacity of dynamic light radii.
Changed, (G)ZDoom text parsers: empty include files now trigger a warning instead of an error and no longer abort parsing.
Fixed, Game configurations: moved Stalagmite:5050 thing to Doom block (so the editor no longer tries to load it for non-Doom game configurations).
Fixed(?), Visual mode: probably fixed a hard-to-trigger exception when sorting translucent geometry.
Fixed, Visual mode: floor glow effect was incorrectly applied to walls (was broken in R2452).
Internal: restructured most of MAPINFO and GLDEFS parsers. Should be more maintainable now.
Updated ZDoom ACC.
Updated zdbsp to 1.19.
Updated documentation.
Fixed, Map Analysis mode: fixed a crash when trying to dissolve an invalid sector when one of it's linedefs referenced it on the both sides.
Fixed, Sectors mode: fixed incorrect undo description when deleting sectors.
Internal: joined declaration and assignment of some more variables.
Internal, Renderer2D.RenderArrows(): only visible lines are now rendered.
Internal, API: renamed public Line3D properties: v1 to Start, v2 to End, color to Color, renderarrowhead to RenderArrowhead.
Added "Paste Properties Special" actions in "Classic" and "Visual" categories. They work the same way as "Paste Special" action.
Added: "Copy Properties", "Paste Properties" and "Paste Properties Special" options are now shown in the Edit menu if current classic mode supports them.
Changed, Paste Properties Special window: only options relevant to current map format are now displayed.
Changed, Paste Properties Special window, UDMF: all UI-managed options are now available.
Fixed: MAPINFO parser was unable to process "include" directives.
Fixed, General interface: selection info was reset to "Nothing selected" after few seconds regardless of current selection.
Fixed, Visual mode: thing bounding boxes were not updated when changing things positions using Randomize mode.
Fixed, Visual mode: event lines were displayed at incorrect height when entering Visual mode for the first time.
Fixed, Texture Browser window: when MixTexturesFlats Game Configuration option is disabled, textures/flats are no longer shown in the Used group when flats/textures with the same names are used in the map.
Fixed(?): probably fixed an exception some users reported when trying to initialize a Classic mode after switching from Visual mode with "Sync cameras" option enabled.
Changed, Game configurations, Thing Categories: a block must have at least one thing category property to be recognized as a thing category.
Changed, Visplane Explorer: the plugin now outputs more info when it fails to initialize vpo.dll.
Cosmetic, Thing Edit window, Doom/Hexen map format: adjusted UI layout so thing flags control no longer displays scrollbars in Hexen map format.
Internal: merged methods from UDMFTools into UniFields, removed UDMFTools.
Updated Inno Setup script (added VC++ 2008 SP1 distributive).
Updated ZDoom_DECORATE.cfg (A_CheckBlock).
Updated documentation (added "System Requirements" page).
Visual mode: fog distance calculation is now much closer to GZDoom one.
Visual mode: thing brightness calculation when a thing is affected by floor glow is now much closer to GZDoom one.
Linedef edit window, UDMF: added "Reset front/back brightness" buttons.
Sector edit window, UDMF: added "Reset ceiling/floor brightness" buttons.
Internal, Visual mode, Things mode: persistent event lines are now updated only when map objects are changed instead of doing it on every display redraw.
Internal: improved Dictionary lookup times when using map objects and textures as keys.
Internal: added "Release + Profiler" solution configuration.
Updated ZDoom_ACS.cfg (Warp).
High-DPI: fixed many issues with incorrect controls size (Tag selector width, Comment Editor size, icons size, tabs size etc.).
Cosmetic: changed map geometry dragging undo messages to more descriptive ones.
Fixed, Textures Browser, cosmetic: "Show textures in subdirectories" checkbox should be repositioned when "Long texture names" one is invisible.
Updated ZDoom_DECORATE.cfg (added A_SetFloatSpeed + a couple of fixes).
Changed, Things, Sectors, Linedefs, Vertices modes: we shouldn't select highlighted map element during the copy action when no map elements are selected.
Internal: removed some debug stuff from CheckTextureAlignment and ResultTexturesMisaligned.
MAPINFO: added "DoomEdNum" and "SpawnNums" blocks support.
MAPINFO: added "#include" directive support.
MAPINFO: added "$gzdb_skip" special comment support.
DECORATE: "spawnthing" Game Configuration block is now updated using "SpawnID" actor property.
Game configurations: added "class" property to the most of ZDoom things.
Actions: removed "Reload MAPINFO" action.
Documentation: merged "GLDEFS and MODELDEF support", "(Z)MAPINFO support" and "TEXTURES support" topics into "(G)ZDoom text lumps support", added info about the other text lumps GZDB can use.
Changed, Texture Browser form: texture groups list can now be resized.
Changed, Texture Browser form: selected group in texture groups list is now highlighted using highlight color even when not focused.
Changed, Linedef Info panel cosmetic: changed vertical position of texture name labels to match with the ones in the Sector Info panel.
Fixed, Visual mode, UDMF: sector geometry cache was not updated after using "Match Brightness" and "Change Brightness" actions on ceilings, so the changes made by them were not visible when using Classic modes in "View Ceiling Textures" mode.
Fixed, Visual mode, UDMF: "Match Brightness" and "Change Brightness" actions set brightness incorrectly in some cases.
Fixed: ACS script names gathering logic was unable to process relative #include and #import paths (like '#import "..\acs\qtilt.acs"').
Updated ZDoom_DECORATE.cfg.
Internal: "uselongtexturenames" setting is now stored in map settings file, not in the program configuration file.
Fixed, Color Picker plugin: in some cases mouse movement was processed incorrectly.
Fixed, Color Picker plugin: float color value output was culture settings-dependant.
Visual mode: when "Synch camera position" setting is enabled, and the cursor was outside of a sector when entering Visual mode, camera height is now adjusted based on nearest sector (previously the height was adjusted only when the cursor was inside of a sector).
"Auto-align textures X", "Auto-align textures X and Y" actions, UDMF: alignment source sidedef part's horizontal scale is now applied to all aligned sidedefs.
Visual mode, UDMF: 'lightfog' flag is now automatically updated when changing sidedef brightness or using "Match Brightness" action.
Linedefs mode: added "Update 'lightfog' flag" menu item.
Game configurations: cosmetic changes in UDMF linedef flag names.
Updated ZDoom_DECORATE.cfg.
Fixed, Sectors mode, UDMF: surface cache was not updated after applying floor/ceiling brightness gradients.
Cosmetic, Sectors mode, UDMF: brightness gradient modes now have more descriptive names.
Internal, InterpolationTools: replaced EaseInOutSine equation with one, which actually works.
Visual mode: removed "Fit Texture's Width" and "Fit Texture's Height" actions.
Visual mode: "Auto-align texture offsets" actions were incorrectly aligning double-sided middle walls in some cases.
Visual mode: "Auto-align texture offsets" actions now align non-wrapped double-sided middle walls to vertical offset closest to their initial vertical offset.
Visual mode: middle parts of double-sided walls were ignored when Shift-selecting walls.
Nodebuilders/Game configurations: GL nodes definitions were missing from game configurations.
Nodebuilders/Game configurations: "~MAP" wildcard can now be a part of a lump name.
Nodebuilders: GL nodes were not properly handled by the editor.
Main Window: the window is now moved into the view when stored position is ouside of screen bounds.
Classic and Visual modes: changing thing pitch was ignored in some cases.
Visual mode: raising and lowering a thing with "+SPAWNCEILING" flag now works the same way as when raising/lowering a regular thing.
Visual mode: using "Raise/Lower Floor/Ceiling to adjacent sector" actions on a thing with "+SPAWNCEILING" flag now works the same way as when using them on a regular thing.
Rendering: even more fixes to MODELDEF and UDMF properties-related model rendering logic.
Internal, ResourceListEditor: rewritten resource validation check in a more OOP-ish way.
Configurations: fixed an infinite loop crash when a file was trying to include() itself.
UDMF thing flags: added Skill 6-8 to the flags list (because there are thing filters for these).
ZDoom_ACS.cfg: added definitions for SetTeleFog and SwapTeleFog.
ZDoom_DECORATE.cfg: added definitions for A_SetTeleFog and A_SwapTeleFog.
Updated ZDoom ACC.
Updated documentation.
Fixed, Texture Browser Form: well, I broke "Tab" key functionality again (in previous commit)...
Maintenance: changed curly braces style to match DB2 one (hopefully not breaking anything in the process...).
Maintenance: changed private method names casing to match DB2 one.
Visual mode: "Lower/Raise Floor/Ceiling" actions now work on surfaces with sector slopes.
Cosmetic: numeric textboxes, which support relative values, now have differently colored text and a tooltip.
Internal: renamed Sector.CeilingSlopeOffset to Sector.CeilSlopeOffset, Sector.CeilingSlope to Sector.CeilSlope to match their names with similar sector properties.
Map Analysis mode: export to file command will now show "Save File" dialog instead of putting the file in the same folder as the map, also added some boilerplate.
Tag Explorer plugin: save to file command will now show "Save File" dialog instead of putting the file in the same folder as the map, also added some boilerplate.
Internal: reformatted GZCrash.log a bit.
Linedefs Mode: "Flip Linedefs" action now tries to align linedefs, so their front (or back) point towards the same sector.
Sectors Mode: "Flip Linedefs" action is now available form this mode, and it will also try to align linedefs, so their front (or back) point towards the same sector.
Preferences: added "Capitalize texture names" option (located in Preferences -> Appearance -> Additional options). When disabled, the casing of displayed texture names will match filenames for textures loaded form TEXTURES or pk3/pk7/folder resources.
Textures Browser: added support for displaying long texture names.
Errors list is now cleared when reloading resources.
Visual mode: added basic support for sector slopes (no UI for that feature yet).
"Preferences -> Editing -> When splitting a linedef" setting is now always used when splitting linedefs.
"Preferences -> Editing -> When splitting a linedef": added "Reset X and Y" option.
"Preferences -> Editing -> Auto-align textures of newly created linedefs" option now works in a more intelligent fashion.
Error Checker mode: added "Check missing flats" check.
Error Checker mode: fixed several descriptions.
Sprite patches for sprites defined in TEXTURES are now loaded from Sprites namespace.
Some of my older texture alignment code didn't work properly when strict texture/flat handling ("mixtextureflats" game configuration flag set to false) was enabled.
Fixed some incorrect checks for missing texture ("-").
Draw Curve Mode: added settings panel.
Sectors mode: added "Make Door" button to the toolbar.
Swapped Side panel and Info panel z-order.
Interface: split toolbar into 3 separate toolbars. All toolbar buttons are now viewable at 1024x768.
Interface: grouped stuff in "Modes" menu a bit better.
Interface: added "Draw [stuff]" buttons to modes toolbar.
Interface: reorganized main menu. Hope it makes more sense now.
API: added General.Interface.AddModesButton() and General.Interface.AddModesMenu(), which can be used to add buttons to specific group in "Modes" toolbar and menu items to specific group in "Modes" menu, so actions, which behave like an editing mode, but are not part of one can be added there.
Map Analysis mode: "Check overlapping lines" now finds duplicate linedefs (e.g. when 2 lines have the same start and end positions).
Map Analysis mode: added "Check overlapping vertices" check. This will check if a vertex is on top of a linedef or another vertex.
Some cosmetic changes in Tools and BaseVisualMode.
Updated zspecial.acs
Error checks: added "Check unused textures" option.
Replaced MissingTexture3D and UnknownTexture3D.
Sectors mode: restored "Lower/Raise Floor/Ceiling by 8 mp" actions.
Visual mode: in some cases sidedefs were rendered as selected when they were not.
Existing linedefs were not split while drawing new lines in some cases.
Texture and height overrides were not applied correctly in some cases.
Preferences form: "Ctrl+Alt+ScrollUp" and "Ctrl+Alt+ScrollDown" dropdown items were setting the shortcut to "Ctrl+Shift+ScrollUp" and "Ctrl+Shift+ScrollDown".
Reverted "Delete Item" action to the way it worked in DB2.
Added "Dissolve Item" action, which works the way "Delete Item" worked in previous revisions of GZDB.
Added "Auto Clear Sidedef Textures" action, "Edit" menu and toolbar button, which toggle automatic removal of sidedef textures when floor or ceiling height is changed or when geometry is drawn, copied or pasted.
Draw Settings panel: upper/lower texture overrides can now be used.
Draw Settings panel: added 2 sets of buttons, which allow to quickly set or clear textures in current selection.
Things are now rendered behind AND on top of the grid/linedefs/vertices when they are dragged.
Redesigned hints system. They are now shown in a side panel.
Edit area auto-focusing is now disabled when script editor is open.
Texture Browser form: no texture group was selected when opening the form in some cases.
Fixed several strange/misleading text messages.
Sectors mode: optimized sector highlight rendering logic.
Sectors mode: optimized sector effect/tag labels update logic.
Geometry tools: optimized several core functions.
Hints for current editing mode can now be displayed when nothing is highlighted (currently the hints are shown only in Draw Geometry mode).
GZDB is now build with LARGEADDRESSAWARE flag, which increases amount of RAM GZDB can use from 1.4 to 2.8 GB.
Location and active tab of all Edit Forms are now stored while GZDB is running.
Focus management between editing window and the rest of the interface should work better now.
Tag Explorer plugin: editing window was not updated properly when Edit forms were opened from Tag Explorer.
Tag Explorer plugin, UDMF: comment editing was incorrectly initialized in some cases.
Snap Map Elements to Grid mode now works much faster and shows a message when completed.
Forced default textures are now only used in drawing modes.
Exception Dialog: long error descriptions were breaking window layout.
Map will no longer be shown in Open Map form if unrelated data is encountered inside of map namespace.
Visual mode: texture offsets are now clamped to texture size when dragging textures with mouse.
Visual mode, UDMF: when gravity is enabled, sector gravity now affects camera movement.
Textures were not loaded properly from PK3/PK7 archives.
Visual mode: restored ability to remove textures using Delete action.
Visual mode: fixed several bugs in Cut/Copy/Paste things actions.
Visual mode: vavoom style 3d floors were not displayed properly.
Visual mode, 3d floors: added support for "RestrictLighting" (2) flag.
Visual mode, 3d floors: inner sides of 3d floors with "swimmable"/"render inside" flags used incorrect brightness value.
Texture scale controls now have "Link" button.
Thing, Sector (UDMF) and Linedef edit forms now work in realtime mode.
Some more fixes in Edit form realtime update stuff.
Removed some unused variables and functions.
Fixed incorrect behavior when 2 linedefs are merged into one after deleting a vertex, when a newly created linedef overlaps existing geometry.
Visual Vertex handles were not updated when sector's floor or ceiling height was changed.
Replaced all doubles with floats.
Script Editor:
Navigator drop-down now updates automatically.
Navigator drop-down now also works for external files.
Added Navigator drop-down support for Decorate and Modeldef.
Increased dynamic lights rendering performance (currently I'm getting around 25 FPS in Spawn's MAP01 with 32 dynamic lights and rendering distance set to 3000, was getting 4-6 FPS in GZDoomBuilder 1.02).
Several fixes in animated lights rendering (secondary light radius can now be smaller than primary light radius, Pulse Light's maximum radius was rendered twise bigger than in GZDoom).
- Fixed a problem where dragging geometry and things onto the window title bar locked up DB2
- Fixed a problem with wrong texture offsets of hi-res textures
