Nodes Viewer mode: added more boilerplate to classic nodes reader.
Thing Filters Form: program configuration was not marked as changed when saving thing filters.
Cosmetic layout fixes in Thing/Linedef/Sector Info panels.
Cosmetic text fixes in several Map Analysis results.
Internal: debug console is now cleared when creating a new map.
Updated ZDoom_DECORATE.cfg.
Statistics control: things count was not updated when adding or deleting things.
Map Analysis mode: "Check texture alignment" is now disabled by default.
Updated Inno Setup script and images.
Added DirectX web installer to Builder\Setup.
Updated MakeRelease.bat.
Updated ZDoom_DECORATE.cfg.
Game configurations, Line Identification action: added "Front side only" (128) flag to arg1.
Game configurations, Line Identification action: renamed arg1 flags to match corresponding UDMF flag names.
Updated udmf_zdoom.txt.
Visual mode: removed "Fit Texture's Width" and "Fit Texture's Height" actions.
Visual mode: "Auto-align texture offsets" actions were incorrectly aligning double-sided middle walls in some cases.
Visual mode: "Auto-align texture offsets" actions now align non-wrapped double-sided middle walls to vertical offset closest to their initial vertical offset.
Visual mode: middle parts of double-sided walls were ignored when Shift-selecting walls.
Nodebuilders/Game configurations: GL nodes definitions were missing from game configurations.
Nodebuilders/Game configurations: "~MAP" wildcard can now be a part of a lump name.
Nodebuilders: GL nodes were not properly handled by the editor.
Main Window: the window is now moved into the view when stored position is ouside of screen bounds.
Classic and Visual modes: changing thing pitch was ignored in some cases.
Visual mode: raising and lowering a thing with "+SPAWNCEILING" flag now works the same way as when raising/lowering a regular thing.
Visual mode: using "Raise/Lower Floor/Ceiling to adjacent sector" actions on a thing with "+SPAWNCEILING" flag now works the same way as when using them on a regular thing.
Rendering: even more fixes to MODELDEF and UDMF properties-related model rendering logic.
Internal, ResourceListEditor: rewritten resource validation check in a more OOP-ish way.
Configurations: fixed an infinite loop crash when a file was trying to include() itself.
UDMF thing flags: added Skill 6-8 to the flags list (because there are thing filters for these).
ZDoom_ACS.cfg: added definitions for SetTeleFog and SwapTeleFog.
ZDoom_DECORATE.cfg: added definitions for A_SetTeleFog and A_SwapTeleFog.
Updated ZDoom ACC.
Updated documentation.
Fixed, Texture Browser Form: well, I broke "Tab" key functionality again (in previous commit)...
Maintenance: changed curly braces style to match DB2 one (hopefully not breaking anything in the process...).
Maintenance: changed private method names casing to match DB2 one.
Texture browser form: added "Long texture names" check-box. It can be used to toggle between displaying long and short texture names.
Texture browser form: added "Show image size" check-box.
Texture browser form: image size is now shown differently.
Image Selector: added a button to toggle between long and short texture name.
Linedef info panel: long texture names are now displayed properly.
Sector info panel: long texture names are now displayed properly.
Fixed: "Save Screenshot" and "Save Edit Area Screenshot" actions were triggered multiple times when a child window was open.
Fixed: used textures should be always updated after using "Change map in current WAD" action.
Fixed, "Change map in current WAD": fixed a crash when trying to switch from a map with missing game configuration path.
Updated ZDoom_ACS.cfg.
Open Map in Current WAD: resources are now reloaded when current and target map's resources don't match.
Added some boilerplate to UniversalParser and PK3FileImage.
Internal: ImageSelectorControl now has "UsePreviews" property.
Internal: added ConfigurablePictureBox.
Updated ZDoom_DECORATE.cfg.
Visual mode: "Lower/Raise Floor/Ceiling" actions now work on surfaces with sector slopes.
Cosmetic: numeric textboxes, which support relative values, now have differently colored text and a tooltip.
Internal: renamed Sector.CeilingSlopeOffset to Sector.CeilSlopeOffset, Sector.CeilingSlope to Sector.CeilSlope to match their names with similar sector properties.
Fixed: certain UDMF-only properties were not cleared when pasting map elements from UDMF to non-UDMF maps.
Fixed a bug introduced in r2043: helper objects were not updated in some cases.
Internal: UDMF sector slopes and offsets are no longer stored in sector.Fields. Use sector.FloorSlope, sector.FloorSlopeOffset, sector.CeilingSlope and sector.CeilingSlopeOffset.
BCC script compiler (https://github.com/wormt/bcc/) is now bundled with GZDB.
Main Form, "File" menu: only existing files are now added to the "recent files" list.
Thing Edit Form, UDMF: added controls for setting pitch, roll, scale, render style, fill color, alpha, health and score.
Visual mode, UDMF: UDMF scale is now applied when rendering sprites.
Added Thing Statistics form (Edit -> View Thing Types...), which shows all loaded thing types with some additional info.
Visual mode: sprites with negative ScaleX and positive ScaleY were not rendered properly.
Classic modes: display was not updated after loading a sprite.
Current testing engine change was not saved on closing the program when no other game configuration settings were changed.
"Preferences -> Editing -> When splitting a linedef" setting is now always used when splitting linedefs.
"Preferences -> Editing -> When splitting a linedef": added "Reset X and Y" option.
"Preferences -> Editing -> Auto-align textures of newly created linedefs" option now works in a more intelligent fashion.
Error Checker mode: added "Check missing flats" check.
Error Checker mode: fixed several descriptions.
Sprite patches for sprites defined in TEXTURES are now loaded from Sprites namespace.
Some of my older texture alignment code didn't work properly when strict texture/flat handling ("mixtextureflats" game configuration flag set to false) was enabled.
Fixed some incorrect checks for missing texture ("-").
Draw Curve Mode: added settings panel.
Sectors mode: added "Make Door" button to the toolbar.
Swapped Side panel and Info panel z-order.
Interface: split toolbar into 3 separate toolbars. All toolbar buttons are now viewable at 1024x768.
Interface: grouped stuff in "Modes" menu a bit better.
Interface: added "Draw [stuff]" buttons to modes toolbar.
Interface: reorganized main menu. Hope it makes more sense now.
API: added General.Interface.AddModesButton() and General.Interface.AddModesMenu(), which can be used to add buttons to specific group in "Modes" toolbar and menu items to specific group in "Modes" menu, so actions, which behave like an editing mode, but are not part of one can be added there.
When Draw Rectangle or Draw Ellipse mode is enabled, it's settings are now shown in side panel.
Draw Ellipse mode: increased maximum number of sides to 512.
Changed the way tags are shown in Tag Selector controls. Tags without labels are now shown as a number (not "Tag N"), and tags with label are now shown as "N (label)", not "label (N)".
Tag labels are now shown in Thing, Sector and Linedef info panels.
Once again changed the way things are rendered while dragged.
Rearranged the label in PairedIntControl and PairedFieldControl (it is now behind numeric controls).
Optimized MapSet.GetSectorByCoordinates().
Sectors mode, rectangular selection: you can now hold Alt to select things inside of selected sectors.
Sector highlight is now shown when selecting sectors in Tag Explorer.
Error checks: added "Check unused textures" option.
Replaced MissingTexture3D and UnknownTexture3D.
Sectors mode: restored "Lower/Raise Floor/Ceiling by 8 mp" actions.
Visual mode: in some cases sidedefs were rendered as selected when they were not.
Existing linedefs were not split while drawing new lines in some cases.
Texture and height overrides were not applied correctly in some cases.
Preferences form: "Ctrl+Alt+ScrollUp" and "Ctrl+Alt+ScrollDown" dropdown items were setting the shortcut to "Ctrl+Shift+ScrollUp" and "Ctrl+Shift+ScrollDown".
Reverted "Delete Item" action to the way it worked in DB2.
Added "Dissolve Item" action, which works the way "Delete Item" worked in previous revisions of GZDB.
Added "Auto Clear Sidedef Textures" action, "Edit" menu and toolbar button, which toggle automatic removal of sidedef textures when floor or ceiling height is changed or when geometry is drawn, copied or pasted.
Draw Settings panel: upper/lower texture overrides can now be used.
Draw Settings panel: added 2 sets of buttons, which allow to quickly set or clear textures in current selection.
Things are now rendered behind AND on top of the grid/linedefs/vertices when they are dragged.
Redesigned hints system. They are now shown in a side panel.
Edit area auto-focusing is now disabled when script editor is open.
Texture Browser form: no texture group was selected when opening the form in some cases.
Fixed several strange/misleading text messages.
Sector and Thing Info panels: fixed possible crash when trying to show unknown thing/sector flag.
Hints were not shown properly when multiselection was started while highlighting a map element.
Copy/Paste actions work much faster now.
Classic modes: rendered grid size in now adjusted to current zoom level.
Increased performance when canceling Edit mode after pasting.
"Export to Wavefront .obj" function: current selection is now converted to sectors before running the function (previously it would export selected sectors when there were sectors selected, or the whole map when no sectors were selected).
Sectors mode: optimized sector highlight rendering logic.
Sectors mode: optimized sector effect/tag labels update logic.
Geometry tools: optimized several core functions.
Hints for current editing mode can now be displayed when nothing is highlighted (currently the hints are shown only in Draw Geometry mode).
GZDB is now build with LARGEADDRESSAWARE flag, which increases amount of RAM GZDB can use from 1.4 to 2.8 GB.
Location and active tab of all Edit Forms are now stored while GZDB is running.
Focus management between editing window and the rest of the interface should work better now.
Tag Explorer plugin: editing window was not updated properly when Edit forms were opened from Tag Explorer.
Tag Explorer plugin, UDMF: comment editing was incorrectly initialized in some cases.
Plugins: fixed a crash caused by inability to find referenced assembly when loading a plugin, which depends on other plugin(s).
Undo-redo, UDMF: undo information was not created properly for several types of UDMF fields for the last map element in the selection when the selection contained more that 1 element.
Updated documentation.
Maintenance stuff:
Core/Plugins/Plug: made current display location and size information properly available to plugins.
Made Core/Controls/ColorControl available to be used by plugins.
Visual mode: added support for "fogdensity" and "outsidefogdensity" MAPINFO properties.
Sector Info panel now shows the number of sector's sidedefs as well as light and fade colors (UDMF only).
UDMF: Sector and sidedef flags are now copied/pasted when using "Copy Properties" and "Paste Properties" actions.
Fixed: in some cases default texture overrides were used even when corresponding option was disabled.
Sector Edit form: light and fade values were not saved when a value was pasted/entered into text box.
Sector Edit form: "reset value" button was not shown for light and fade values when selected sectors had different light/fade colors.
Reverted Open Map form changes from previous commit (my assumption that map marker is always empty was not correct...)
Updated documentation.
Snap Map Elements to Grid mode now works much faster and shows a message when completed.
Forced default textures are now only used in drawing modes.
Exception Dialog: long error descriptions were breaking window layout.
Map will no longer be shown in Open Map form if unrelated data is encountered inside of map namespace.
"Snap Map Elements to Grid" mode now tries to fix invalid geometry after vertex snapping.
Vertices mode: in some cases not all vertices were removed when deleting vertices.
Removed "Load GZDoom light definitions" from preferences. If you want to use GZDoom's GLDEFS definitions, add "lights.pk3" as a resource.
Visual mode: fixed a crash when toggling GZDoom Geometry Effects (Tab)
Fixed sector bounding box calculation error.
Renamed "Edit -> Grid Setup..." to "Edit -> Grid and Backdrop Setup..."
Updated documentation
