Behaves ALMOST as you'd expect. It gets the z position of the slope at the player coordinates when it comes to the sectorlist check (which is first), though, so there's a few oddities that are amplified with steep slopes:
* If the slope's sloping away from you at a steep angle, you might not be able to step down onto it, but you won't teeter (because it's at a step-down-able height if it extended to directly beneath you)
* If the slope's sloping towards you at a steep angle, you might end up in teetering frames when you're able to step down onto it (because it's NOT at a step-down-able height if it extended to directly beneath you)
HOWEVER, it would be pretty obnoxious to hold back code which is functionally superior in every way otherwise, and it doesn't really seem like there's a good way to get that checked tbph
*The No Physics flag now works (Red, you might want to doublecheck this to see whether I haven't missed any eosteric stuff out). Going downhill is a little bumpy, and I'm not sure whether that's good or not. Someone help me out here?
*The SRB2CB typeshims are now behind #ifdef ESLOPE_TYPESHIM instead of #if 1 for easier disabling.
*Slopes' downhill thrusts are now scaled with regards to object gravity. This is actually untested in gravities other than normal and reverse normal but it's one line which can be easily reverted in that circumstance. I also checked with MI to make sure this is how it's calculated elsewhere, so fingers crossed this doesn't cause any edge cases.
*As a consequence of the above point, there's now a function in p_mobj.c/h that returns an object's internal gravity - seperated out from the logic of P_CheckGravity, which really didn't need to be so monolithic. Multiply by global gravity to get the thrust. This should probably be available to Lua somehow, but I have absolutely no idea where to start with that. Wolfs, maybe?
Non-comprehensive test file available at /toaster/slptst3.wad on the ftp.
NiGHTS hotfix
Fixes the following issues relating to playing as NiGHTS Super Sonic that apparently popped up between 2.1.14 and next (mostly due to the changes to SRB2's trig stuff it seems):
* Super Sonic drifts to the side at some angles around an axis, and is unable to go directly upwards or downwards as a result
* Drilling to the side when on the ground causes the drill sound to constantly restart
* CEZS's start not actually being lined up properly with the first axis means the player is not able to go backwards along the track (because the player is not actually aligned with the track properly, preventing you from touching the attached line transfer)
* trying to hug some walls such as the tall wall before the library section of CEZS allows Super Sonic to go through them
These fixes needs proper testing before this branch can be merged in, in case they accidentally break other things as a result or something.
See merge request !71
Basically I kind of worked around any potential trig inaccuracies by not using the player position directly for setting momx/momy. This way, if player->angle_pos == player->old_angle_pos, momx/momy are zero
Demo replay fixes
Changes made/bugs fixed in this branch:
* Replay camera is now controllable when climbing (https://mb.srb2.org/showthread.php?t=38668), and in waterslides
* localangle (read: the angle between you and the camera, I think) now doesn't change during demo replays in most situations, unless the player is in analog mode. Exceptions include zoomtubes and NiGHTS super
* Replay camera now doesn't act silly if the player is in analog mode (assuming you also recorded it in that mode to begin with, anyway)
See merge request !66
Slope fixes
This branch fixes the following slope-related physics and rendering bugs:
* Rings in multiplayer stages respawning inside slopes (even despite being able to spawn ABOVE them on map load)
* Player starts spawning players inside slopes
* Elemental flame trails not appearing if a player spindashes UP a slope; see issue #21
* Dying players "jumping" off slopes to the side if they were previously standing on one
* Some issues with FOF slope rendering
* Various issues with sprites displaying through walls adjacent to slopes
Other features added:
* Objectplace now supports slopes (this is Inuyasha's doing)
* Automap in DEVMODE now supports slopes (my doing)
Just making this merge request now rather than later, ~~in case I decide not to make any more fixes for the time being~~ (this branch doesn't seem to want to die lol), and so we can get these merged in as soon as the code's all been checked over.
See merge request !50
xorshift* PRNG
This needs testing to ensure I didn't mess anything up switching function names around.
Our PRNG sucks. This is probably obvious. I wish I had known better at the time I implemented it, but oh well.
The replacement is an xorshift* PRNG variant with period 2^32 - 1 (meaning that the PRNG state will loop after four billion calls ... that's not likely to happen), versus the old PRNG's period of about 2^22 (?). The output is also much more random and less predictable; the old PRNG would fall into a predictable loop of output after about 4000 numbers were generated, which isn't much.
The PRNG here also outputs numbers as fixed point from [0,1) (that's 0 to FRACUNIT-1, in other words) instead of single bytes at a time. This makes it much easier to calculate things for, say, P_RandomRange and P_RandomKey. A new macro, P_RandomChance(p), is now in use that returns true _p_ percent of the time, where _p_ is a fixed_t probability from 0 (0%) to FRACUNIT (100%).
This doesn't affect netgames at all; the code for seed saving and restoring is identical (aside from a check to prevent seed being set to 0, which breaks xorshift PRNGs). Demos break, but A: _duh_ and B: they're already broken by all the changes to physics to accommodate slopes.
P_Random is deprecated in Lua, as the function was renamed to P_RandomByte. Aside from that, nothing special.
See merge request !64
Fix for teetering on PolyObjects
So... somebody goofed and didn't realise PolyObject sectors could be added to the sector node list for each object (which is referenced by mobj->touching_sectorlist), via their linedefs if they are nearby the player (yes, PolyObject linedefs are special and get to move about the level). As it turns out, this allows even INTANGIBLE PolyObjects to make you teeter in a seemingly inexplicable way.
What is happening is that PolyObject sectors, when they are added to the mentioned lists, are then checked under normal sector teetering conditions - if the player is above the floorheight by 24 FUs, you're officially teetering unless stated otherwise. The actual PolyObject teetering code can't help you here if the conditions are right, especially if they're taller than 24 FU in height.
There are a number of things wrong with the teetering code in general that I'd like to sort eventually, but at least now teetering on PolyObjects is fixed at last ...right? Please check the branch out if you can to check this, obviously.
See merge request !54
P_RandomChance is now a macro for something that should happen a
certain percentage of time.
P_SignedRandom was moved to a macro. Nobody cared.
# Conflicts:
# src/p_inter.c
BACKPORT: removal of music slots
Relevant commits cherry-picked. Basically everything except the internal music track name switches.
See merge request !43
Use whatever names you want for your music. So long as you prefix the lumps with O_ or D_, it doesn't matter anymore.
DISCLAIMER: Linedef type 413 (change music) and Lua scripting is not tested.
(cherry picked from commit 025ca413a2a01a8ec7c104748c2f510e350aa457)
# Conflicts:
# src/p_user.c
Compiling errors fixed in this commit:
* Various cases of mixed declaration and statement code
* Implicit declaration of slope functions (read: you forgot to put "include "p_slopes.h" in MORE than a few places)
* an odd case of a bad fixed_t to float typecase, cause by using P_GetZAt directly inside FIXED_TO_FLOAT
* a few minor cases of bad unsigned-signed comparisons
* no prototypes for some of the new slope functions. For goodness sake Red, this is basic stuff!
Assume that every frame the player is on the ground, their pmomz will
be re-set properly if the floor is moving, therefore if the platform
STOPS, we need this to set it to 0.
Here's how it works: When a player walks off the
moving platform, it applies their pmomz once, and
then _keeps pmomz set_ so that the camera still
adds pmomz to its movements until they hit another
floor. This way, the camera doesn't jerk around.
Now players will apply platform movement when jumping,
but only if the platform is moving the same direction
as their jump is, and all other objects will have an
appropriate pmomz in reverse gravity FOF situations.
These functions were already here before, and I /swear/ the slope
physics became slightly less glitchy after switching to them...
Only issue is the slope plane mapping code hasn't been properly
converted yet, so they don't render properly for now.
Your acceleration vector parallel to the slope is reduced based on slope
angle if it's going up the slope. The pull physics' momentum increase was
toned down a bit to go along with this. Also, I removed the ifdefs for
OLD_MOVEMENT_CODE because why should that be kept around?
...
(It's that infamous intangible West/South linedefs bug, which was really a blockmap-related bug all along. AND IT WAS SO SIMPLE TO FIX!)
git-svn-id: https://code.orospakr.ca/svn/srb2/trunk@9048 6de4a73c-47e2-0310-b8c1-93d6ecd3f8cd
Fixes https://mb.srb2.org/showthread.php?t=39921 where the issue before was that when you transformed your momentum would still have you moving slowly, which could cancel out the animation.
