CHAN_LOOP so that the higher level sound code knows they loop and can handle them accordingly.
- Added support for a LOOP_BIDI tag. Set it to "1", "On", "True", or "Yes" to use a
bidirectional loop. This only works with sounds and not music, because music is streamed
so does not support them.
- Extended custom loop support to work with samples as well as music.
SVN r2434 (trunk)
way MP3 obfuscates custom tags. Vorbis and FLAC are fine. (I could make it work with MP3,
but you should be using Vorbis instead.) They are:
* LOOP_START: Start time for the loop. If omitted, the song repeats from the beginning.
* LOOP_END: End time for the loop. If omitted, the song loops at the end. (If you need to specify this, why aren't you using a shorter song.)
You only need to specify one of these tags to set the custom loop. Naturally, you can set
them both, as well. The format for each tag is the same:
* If it contains a colon (:), it specifies by time. This may be of the form 00:00:00.00
(HH:MM:SS.ss) to specify by play. Various parts may be left off. e.g. To start the loop
at 20 seconds in, you can use ":20", 0:20", "00:00:20", ":20.0", etc. Values after the
decimal are fractions of a second and accurate to one millisecond.
* If you don't include a colon but just have a raw number, then it's the number of PCM
samples at which to loop.
* Any characters other than digits (0-9), colons (:), or a single decimal point for the
seconds portion will result in the tag being ignored.
SVN r2424 (trunk)
atexit for it, which gets executed after the sound system shuts down.
- Fixed: FPlayList::Backup() failed to wrap around below entry 0 because Position is
unsigned now.
SVN r2188 (trunk)
* Looping sounds that have been playing for a very long time, were evicted,
and then were restarted need to have their positions clamped to lie
within the bounds of the sounds. If we try to set a start position very
far beyond the end, it will overflow inside FMOD and not work.
* A start time of 0 is not actually valid and means the sound was never
assigned a start time.
- The latter bug also reveals a problem with starting looped sounds evicted:
They need to be assigned a start time so if they should have the opportunity
to start later, they will be properly synchronized.
SVN r1987 (trunk)
unsigned integer that can use all 32 bits. They must therefore use
the unsigned mul instruction rather than the signed imul instruction.
- Fixed several signed/unsigned comparison and possibly uninitialized
variable warnings flagged by GCC.
SVN r1965 (trunk)
position when evicting sounds, because restarting the sound system causes
the DSP clock to restart at 0, so start times that were recorded before
the reset are no longer applicable after the reset.
- Fixed: S_StopChannel() always set the channel's actor to NULL, eliminating
origin information when resetting the sound system.
SVN r1949 (trunk)
in the gameinfo.
- Added Yes/No selections for Y/N messages so that you can answer them
entirely with a joystick.
- Fixed: Starting the menu at the title screen with a key other than Escape
left the top level menu out of the menu stack.
- Changed the save menu so that cancelling input of a new save name only
deactivates that control and does not completely close the menus.
- Fixed "any key" messages to override input to menus hidden beneath them and
to work with joysticks.
- Removed the input parameter from M_StartMessage and the corresponding
messageNeedsInput global, because it was redundant. Any messages that want
a Y/N response also supply a callback, and messages that don't care which
key you press don't supply a callback.
- Changed MKEY_Back so that it cancels out of text entry fields before
backing to the previous menu, which it already did for the keyboard.
- Changed the menu responder so that key downs always produce results,
regardless of whether or not an equivalent key is already down.
SVN r1753 (trunk)
and a list of all attached controllers, and a second level for configuring
an individual controller.
- Fixed: Pressing Up at the top of a menu with more lines than fit on screen
would find an incorrect bottom position if the menu had a custom top height.
- Added the cvars joy_dinput, joy_ps2raw, and joy_xinput to enable/disable
specific game controller input systems independant of each other.
- Device change broadcasts are now sent to the Doom event queue, so
device scanning can be handled in one common place.
- Added a fast version of IsXInputDevice that uses the Raw Input device
list, because querying WMI for this information is painfully slow.
- Added support for compiling with FMOD Ex 4.26+ and running the game
with an older DLL. This combination will now produce sound.
SVN r1717 (trunk)
- Added more output to zipdir and a -q option to turn it off.
- Added -u option to zipdir to only recompress those files in a zip that have
changed.
- Added -d and -f options to zipdir. -d forces deflate compression, and -f
forces a write of the zip, even if it's newer than all the files it contains.
- Added support for bzip2 and LZMA compression to zipdir.
SVN r1468 (trunk)
effect rather than as an input to the ChannelGroup Target Unit. This means
the water effect is now applied after any room reverb, rather than in
parallel with it.
- Fixed: UI sounds should not have reverb applied to them.
SVN r1450 (trunk)
DSP position. Without also synchronizing the stopping of sounds, it can
cause problems with things like the chainsaw where the sound is stopped and
immediately restarted, causing occasional gaps between the stopping of the
sound and the starting of the new one. (I added the start synchronization to
combat flanging of paired moving polyobjects when moving around, but I think
just removing velocity from the player for sound calculations takes care of
that well enough.)
SVN r1447 (trunk)
256 to 1024 to deal with a module that otherwise would not load.
- Removed the artificial restriction on not supporting Vorbis-compressed
samples in XMs if they are stereo, since it turns out that OggMod does
support them.
SVN r1316 (trunk)
do it the old way and scan every channel to see if it matches an actor/
entchannel pair.
- Fixed: S_RelinkSounds() did not move the SoundChans bitfield to the new
actor.
- Fixed: Stolen channels could be kept around by the high-level channels
indefinitely.
SVN r1289 (trunk)
* This may or may not be a problem, but GCC warned that FStateDefinitions::
AddStateDefines() does not initialize def.FStateDefine::DefineFlags, so
I fixed that.
SVN r1262 (trunk)
- Fixed: ThingCountSector and ThingCountNameSector did not remove enough
entries from the stack, and did not put the result in the right slot.
- Fixed: Teleport lines were prioritized over secret lines when deciding what
color to draw them on the automap.
- Fixed: Death-reverting morphs did not remove the morph item from the
player's inventory when death caused the morph to revert.
- Updated fmod_wrap.h for FMOD Ex 4.18.
SVN r1259 (trunk)
- Removed extraneous printf parameter for Texman.Init startup message.
- Added newlines to the ends of a few headers that were missing them.
- Fixed more GCC errors/warnings.
SVN r1232 (trunk)
The rolloff and channel ended callbacks now call functions in s_sound.cpp
instead of working on the data itself and GSnd->StopSound has been replaced
with S_StopChannel.
SVN r1227 (trunk)
so that all files are included by a central one instead of compiling
each one separately. This speeds up the compilation process by 25%
when doing a complete rebuild in Visual C.
- Cleaned up more header dependencies.
SVN r1226 (trunk)
fact that NVidia's don't report it, even though they support it. If there
are any cards that no longer have antialised lines on the automap, please
let me know.
- Added vid_hwaalines cvar to force antialiased lines off for the
Direct3D renderer, in case it doesn't really support them.
SVN r1210 (trunk)
method to the SoundRenderer class so that this function doesn't need to
load the sound for the NullSoundRenderer.
- Took some more non-FMOD related code out of fmodsound.cpp, including the
code that checks for raw and Doom sounds. This means that sfxinfo_t is no
longer needed in the SoundRenderer class so I took out all references to it.
SVN r1208 (trunk)
to the rolloff information back to NULL when starting the sound fails.
- Fixed: Rolloff information was taken from the sfxinfo that contained the
actual sound data, not the one that was used for starting the sound.
SVN r1206 (trunk)
and sectors are done in s_sound.cpp and not in fmodsound.cpp. Also removed
several 'sector' parameters because they were never used inside the sound code.
SVN r1200 (trunk)
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
owned. Having owned inventory items interact with the world is not supposed
to happen.
- Fixed: case PCD_SECTORDAMAGE in p_acs.cpp was missing a terminating 'break'.
- Fixed: When a weapon is destroyed, its sister weapon must also be destroyed.
SVN r1068 (trunk)
during it.
- UI sounds are now omitted from savegames.
- Fixed: Menu sounds had been restricted to one at a time again.
- Moved the P_SerializeSounds() call to the end of G_SerializeLevel() so that
it will occur after the players are loaded.
- Added fixes from FreeBSD for 0-length and very large string buffers
passed to myvsnprintf.
SVN r1063 (trunk)
sounds are handled.
- Why do polyobjects have a 3D start spot? Flattened it to 2D.
- Moved the sector sound origin calculation out of fmodsound.cpp and into
s_sound.cpp so that the near sound limiting will use the correct sound
location for deciding on neighbors.
SVN r1061 (trunk)
arbitrary point. It has been replaced with a variant that takes a polyobject
as a source, since that was the only use that couldn't be rewritten with the
other variants. This also fixes the bug that polyobject sounds were not
successfully saved and caused a crash when reloading the game. Note that
this is a significant change to how equality of sound sources is determined,
so some things may not behave quite the same as before. (Which would be a
bug, but hopefully everything still sounds the same.)
SVN r1059 (trunk)
run into the adjacent columns.
- Added a NullSoundRenderer so that most of the checks against a NULL GSnd
can be removed.
- Fixed: Looping sounds must always successfully allocate a channel, even if
it's only a pre-evicted channel.
SVN r1058 (trunk)
the rest of the game is concerned, these sounds will never stop once they
have been started until they are explicitly stopped. If they are evicted
from their channels, the sound code will restart them as soon as possible.
This means that instead of this:
if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1))
{
S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM);
}
The following is now just as effective:
S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM);
There are also a couple of other ramifications presented by this change:
* The full state of the sound system (sans music) is now stored in save
games. Any sounds that were playing when you saved will still be
playing when you load. (Try saving while Korax is making a speech in
Hexen to hear it.)
* Using snd_reset will also preserve any playing sounds.
* Movie playback is disabled, probably forever. I did not want to
update the MovieDisable/ResumeSound stuff for the new eviction
tracking code. A properly updated movie player will use the VMR,
which doesn't need these functions, since it would pipe the sound
straight through the sound system like everything else, so I decided
to dump them now, which leaves the movie player in a totally unworkable
state.
June 26, 2008
- Changed S_Sound() to take the same floating point attenuation that the
internal S_StartSound() uses. Now ambient sounds can use the public
S_Sound() interface.
- Fixed: S_RelinkSound() compared the points of the channels against the
from actor's point, rather than checking the channels' mover.
- Changed Strife's animated doors so that their sounds originate from the
interior of the sector making them and not from the entire vertical height
of the map.
SVN r1055 (trunk)
that animated icons can be done with it.
- Changed FImageCollection to use a TArray to hold its data.
- Fixed: SetChanHeadSettings did an assignment instead of comparing
the channel ID witg CHAN_CEILING.
- Changed sound sequence names for animated doors to FNames.
- Automatically fixed: DCeiling didn't properly serialize its texture id.
- Replaced integers as texture ID representation with a specific new type
to track down all potentially incorrect uses and remaining WORDs used
for texture IDs so that more than 32767 or 65535 textures can be defined.
SVN r1036 (trunk)
consideration the size and shape of the sector producing the sound. See
the lifts on Doom 2 MAP30 and compare with previous versions.
- Fixed: The stop sound for sector-based sound sequences was not played with
the CHAN_AREA flag.
- Removed the distinction between S_Sound() and S_SoundID() functions. Use
S_Sound() for both names and IDs from now on.
SVN r1034 (trunk)
any zone you want.
- Using a too-recent version of FMOD now gives an error, since there may be
breaking changes to the API from one version to the next (excluding
revisions in stable branches, which only represent bug fixes).
- Updated fmod_wrap.h for FMOD 4.16 and corrected a bug that had gone
unnoticed before: The delayhi and delaylo parameters for Channel::setDelay()
and getDelay() were swapped.
SVN r1032 (trunk)
heavily customized version of DUMB (Dynamic Universal Music Bibliotheque).
It has been slightly modified by me:
* Added support for Ogg Vorbis-compressed samples in XM files ala FMOD.
* Removed excessive mallocs from the replay core.
* Rerolled the loops in resample.c. Unrolling them made the object file
~250k large while providing little benefit. Even at ~100k, I think it's
still larger than it ought to be, but I'll live with it for now.
Other than that, it's essentially the same thing you'd hear in foobar2000,
minus some subsong detection features. Release builds of the library look
like they might even be slightly faster than FMOD, which is a plus.
- Fixed: Timidity::font_add() did not release the file reader it created.
- Fixed: The SF2 loader did not free the sample headers in its destructor.
SVN r995 (trunk)
closer to FMOD 3, which downmixed all stereo sounds to mono before
playing them in 3D. Also added experimental 3D spread for stereo sounds
so that you can actually hear them in stereo.
SVN r989 (trunk)
optional freeverb unit.
- Removed ResetEnvironment hack, since with software reverb, losing the
existing reverb when focus is lost isn't a problem.
- Commented out the TiMidity FIXME messages.
SVN r973 (trunk)
- Added very basic Soundfont support to the internal TiMidity. Things missing:
filter, LFOs, modulation envelope, chorus, reverb, and modulators. May or
may not be compatible with TiMidity++'s soundfont extensions.
- Added support for quoted strings to the TiMidity config parser.
SVN r957 (trunk)
of all types on the same linedef. Also added a 'first side only' flag. This
is not usable from Hexen or Doom format maps though but in preparation of
the UDMF format discussed here:
http://www.doomworld.com/vb/source-ports/43145-udmf-v0-99-specification-draft-aka-textmap/
- Changed linedef's alpha property from a byte to fixed point after seeing that
255 wasn't handled to be fully opaque.
- fixed a GCC warning in fmodsound.cpp
SVN r954 (trunk)
there were no designated characters to strip at the end of it.
- Added support for Shoutcast/Icecast playlists.
- Added an error message when a playlist could not be opened.
- Added support for PLS format playlists, in addition to M3U.
- Changed FPlayList to use an array of FStrings.
- Fixed: Playlists required every song to be specified by an absolute path.
SVN r951 (trunk)
waveforms, and three of them are non-negative. This can cause a tendency
for the resulting output waveform to go into very high ranges depending on
the timbres used, and Heretic's exemplify this problem.
- Reduced the OPL volume level slightly.
- Fixed: The waveform view from snd_drawoutput was upside-down.
SVN r949 (trunk)
EMIDI specs: Track designations and exclusions should be ignored past
the initial beat, and EMIDI program change and volume events should be
ignored unless they were used in the initial beat.
SVN r944 (trunk)
could also be because the user selected PCM-Float output, but the driver
doesn't support it (even if it claims to *cough*Audigy XP drivers*cough*).
SVN r943 (trunk)
track off, any ticks that had only events on the disabled track would cause
the delay for that track to be thrown away, and the following notes on
enabled tracks would play too soon. This could be heard quite clearly in
xplasma.mid, where track 4 (FMGlass Drone 1) would interfere with the timing
of tracks 13 and 14 (EP1 Melody and EP1 Echo).
SVN r937 (trunk)
already playing on the channel, it should stop it with finish_note(), not
kill_note(). This can be clearly heard in the final cymbal crashes of
D_DM2TTL where TiMidity cuts them off because the final cymbals are played
with a velocity of 1 before the preceding cymbals have finished. (I wonder
if I should be setting the self_nonexclusive flag for GUS patches to
disable even this behavior, though, since gf1note.c doesn't turn off
duplicate notes.)
- Changed envelope handling to hopefully match the GUS player's. The most
egregious mistake TiMidity makes is to treat bit 6 as an envelope enable
bit. This is not what it does; every sample has an envelope. Rather, this
is a "no sampled release" flag. Also, despite fiddling with the
PATCH_SUSTAIN flag during instrument loading, TiMidity never actually
used it. Nor did it do anything at all with the PATCH_FAST_REL flag.
SVN r934 (trunk)
3D panning.
- The listener's velocity is now set at 0 for the sound engine. The player
moves so fast that you can hear the doppler shift just by running around,
otherwise.
- Changed the sound code so that all sounds that start playing on a single
tic actually start playing at the exact same sample position.
SVN r927 (trunk)
wave file.
- Changed the default channel velocity for MUS files from 64 to 100 to
better match apparent MIDI practice. (Would like to know what this is
supposed to be.)
- Changed the mus2midi channel assignments to match the internal player's.
- Fixed: apply_envelope_to_amp() should clamp the mix levels to 0.
SVN r926 (trunk)
timidity_voices cvar.
- Added stats lines for the OPL and Timidity MIDI devices.
- Completely changed the way TiMidity volume calculations are done. It
should now be extremely close to the output a real GUS would produce with
its official MIDI player (excepting where TiMidity normalizes sample
volumes). The new equations more closely match what is specified by the DLS
and SF2 specs (but not quite), so I presume it's also more musically
correct than what TiMidity (and TiMidity++) do.
SVN r925 (trunk)
before sending it to Channel::getReverbProperties().
- Fixed: The earthquake effect did not play its sound as an actual looping
sound. I'm a bit surprised this only recently started causing problems.
SVN r923 (trunk)
snd_reset would eventually run into the hard limit on the total number
of FMOD::System objects that can be created concurrently (currently 15).
- Added proper error checks to the FMOD initialization process.
SVN r921 (trunk)
- Set note velocity back to using a linear sounding volume curve, although
it's now used to scale channel volume and expression, so recompute_amp()
is still only doing one volume curve lookup.
- Fixed: TimidityMIDIDevice caused a crash at the end of a non-looping song.
SVN r920 (trunk)
- Changed: When loading Zips all patches in the patches/ directory should
be loaded, not only those used by a texture in TEXTUREx.
- Disabled timidity_mastervolume for the internal Timidity again because
with the altered volume calculation it is no longer needed and the default
volume is on the same level as OPL and FMOD.
SVN r909 (trunk)
FMOD_INIT_ENABLE_PROFILE. Renamed the corresponding cvar to snd_profile.
- Removed the normalize parameter from SoundStream::Play().
- Disabled the chorus and reverb effects added to SDL_mixer's Timidity,
because they were probably never tested well, either. Thanks to the bug
in vc_alloc(), they were never even activated.
- Restored the exact frequency range search that was missing from SDL_mixer's
verion of select_sample().
- Fixed: vc_alloc(), kill_others(), and note_on() treated Voice::status as a
bit mask, when it's not. These were changes made to SDL_mixer's Timidity.
- Restored the original Timidity volume equation. The other louder one was
put in when I didn't realize all channels were mono and many notes sounded
too quiet because they never completed their attack phase.
- Fixed: FileReader::Gets() acted as if fgets() always read the maximum
number of characters.
- Fixed: FileReader::Open() did not set FilePos and StartPos to 0.
SVN r908 (trunk)
because it has the same sound volume issues as the external one.
- Replaced use of stdio in Timidity with FileReader and added the option to read
from the lump directory. If the main config file is inside the lump directory
it will assume that everything else is as well. If it is a real file it will be
assumed that the rest is real files as well.
- Fixed: None of the error returns in Timidity::read_config_file closed the file being read.
SVN r906 (trunk)
- Fixed: MinGW doesn't have _get_pgmptr(), so it couldn't compile i_main.cpp.
- Fixed: MOD_WAVETABLE and MOD_SWSYNTH are not defined by w32api, so MinGW
failed compiling the new MIDI code.
- Fixed: LocalSndInfo and LocalSndSeq in S_Start() need to be const char
pointers, since "" is a constant.
- Fixed: parsecontext.h was missing a newline at the end of the file.
SVN r904 (trunk)
particular, this meant that every channel was almost certainly in mono mode,
which can sound pretty bad if the song isn't meant to be played that way.
- Added bank numbers to the MIDI precaching for Timidity, since I guess I do
need to care about banks, if even the Duke MIDIs use various banks.
- Fixed: snd_midiprecache only exists in Win32 builds, so gameconfigfile.cpp
shouldn't unconditionally link against it.
- Fixed: pre_resample() was still disabled, and it left two samples at the end
of the new wave data uninitialized.
SVN r903 (trunk)
channel when restarting the song, rather than emitting a single note off
event which only has a 1 in 127 chance of being for a note that's playing
on that channel. Then I decided it would probably be a good idea to reset
all the controllers as well.
- Increasing the size of the internal Timidity stream buffer from 1/14 sec
(copied from the OPL player) improved its sound dramatically, so apparently
Timidity has issues with short stream buffers. It's now at 1/2 sec in
length. However, there seems to be something weird going on with
corazonazul_ff6boss.mid near the beginning where it stops and immediately
restarts a guitar on the exact same note.
- Added a new sound debugging cvar: snd_drawoutput, which can show various
oscilloscopes and spectrums.
- Internal TiMidity now plays music.
- Changed the progdir global variable into an FString.
SVN r900 (trunk)
can be played as OPL can also be dumped.
- Removed the opl_enable cvar, since OPL playback is now selectable as just
another MIDI device.
- Added support for DRO playback and dual-chip RAW playback.
- Removed MUS support from OPLMUSSong, since using the OPLMIDIDevice with
MUSSong2 works just as well. There are still lots of leftover bits in
the class that should probably be removed at some point, too.
- Added dual-chip dumping support for the RAW format.
- Added DosBox Raw OPL (.DRO) dumping support. For whatever reason,
in_adlib calculates the song length for this format wrong, even though
the exact length is stored right in the header. (But in_adlib seems buggy
in general; too bad it's the only Windows version of Adplug that seems to
exist.)
- Rewrote the OPL dumper to work with MIDI as well as MUS.
SVN r872 (trunk)
Missimp.mid sounds a lot better now, though still a little off.
- Fixed: MIDI files that had ticks with nothing but meta-events did not play
properly. (fixes sonic3_finalboss.mid)
SVN r868 (trunk)
advanced sound options menu. Removed opl_enable from the menu.
- Added OPL synth as MIDI device -3. Since this is based on the MUS player
code, it only supports those events and controllers supported by MUS.
Some of Duke's MIDIs sound awful, but I think that may be more because
it's using different instruments... There's a thread in the MIDI streamer
class that could be taken out for Linux, since it doesn't need to deal
with the Windows Multimedia API, but for now, this is still Windows-only.
SVN r864 (trunk)
floats, so I can write its output directly to the stream buffer. In
addition, this lets me bring the OPL volume level much closer to the
standard MIDI volume.
SVN r863 (trunk)
into a general MIDI player.
- Fixed: Passing false for a stream callback did not stop the stream.
- Removed opl_frequency, since the only time the emulation sounds good is
when it plays at the exact frequency of a real chip.
- Music no longer plays at all when snd_musicvolume is 0.
- Bumped up snd_sfxvolume and snd_musicvolume default values.
SVN r862 (trunk)
that the drivers will treat a BackBufferCount of 0 as a request for
double buffering.
- Fixed: Unsetting a cvar did not remove it from the list of tab
completions.
- Added "" as a synonym for "nullimage" in SBARINFO.
- Fixed: MAKESAVESIG's stringifier in version.h did not work as expected.
It stringified the passed macro name, not the value of the macro.
- Moved DCajunMaster off the DObject hierarchy.
- Changed DCajunMaster::getspawned into a TArray of FStrings. It was
mysteriously being left pointing to uninitialized memory during the
final GC at exit and crashing.
- Fixed: The code that removed hexdd.wad from the list of IWADs when
hexen.wad was not present did not work.
SVN r861 (trunk)
from doing prebuffering of the song. This was causing the Linux version to
hang while waiting for input from the pipe, since Timidity hadn't been
started yet. I tried using a select call in the FillStream() method, but it
always seems to return the pipe as having nothing available. Unfortunately,
the game still falls all over itself if Timidity isn't available. Instead
of execvp failing nicely, X errors kill the game. I don't know why it's
doing that. My advice for Linux music: Skip Timidity++ and get a DLS patch
set (/WINDOWS/system32/drivers/gm.dls is probably the most common by far)
and set the snd_midipatchset cvar to point to it. It's faster and also
sounds a whole lot better than the crappy freepats Ubuntu wants to install
with Timidity++.
- GCC fixes.
SVN r858 (trunk)
the song's relative volume takes effect.
- Removed the arbitrary 1024 bytes limit when the file being played is a MIDI
file. I had a D_DM2TTL that's only 990 bytes.
- Restructured I_RegisterSong so that $mididevice works again and also supports
selecting FMOD.
SVN r857 (trunk)
- Removed movie volume from the sound menu and renamed some of the other
options to give the MIDI device name more room to display itself.
- Moved the midi device selection into the main sound menu.
- Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the
default device. By default, it uses exactly the same DLS instruments as the
Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set
you want to use, set the snd_midipatchfile cvar to specify where it should
load the instruments from.
- Changed the ProduceMIDI function to store its output into a TArray<BYTE>.
An overloaded version wraps around it to continue to supply file-writing
support for external Timidity++ usage.
- Added an FMOD credits banner to comply with their non-commercial license.
- Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather
than a time in ms, this is now the length in samples of the DSP buffer.
Also added the snd_buffercount cvar to offer complete control over the
call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate
below about 44kHz, you will need to set snd_buffersize to avoid long
latencies.
- Reimplemented the snd_output cvar for the FMOD Ex sound system.
- Changed snd_samplerate default to 0. This now means to use the default
sample rate.
- Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and
snd_hrtf available through the menu.
- Split the HRTF effect selection into its own cvar: snd_hrtf.
- Removed 96000 Hz option from the menu. It's still available through the
cvar, if desired.
- Fixed: If Windows sound init failed, retry with DirectSound. (Apparently,
WASAPI doesn't work with more than two speakers and PCM-Float output at the
same time.)
- Fixed: Area sounds only played from the front speakers once you got within
the 2D panning area.
SVN r854 (trunk)
xlat_parser.y because both files had the same time stamp after an update,
and Lemon only rewrites the header file if it's changed.
- Added $volume SNDINFO command. This is multiplied with the volume the sound
is played at to arrive at the final volume (before distance attenuation).
- Added the CHAN_AREA flag to disable 3D panning within the min distance of a
sound. Sector sound sequences (except doors) use this flag.
- Added the CHAN_LOOP flag to replace the S_Looped* sound functions.
- Restored the sound limiting.
SVN r849 (trunk)
contain enough music to fill the initial output buffers.
- Removed the read barrier around ADehackedPickup::RealPickup. If the real
pickup is picked up, it may very well destroy itself before the dehacked
wrapper's stubs that use it are called.
- Reverted revision 840. For a file we don't want end users to be touching,
making DEHSUPP plain text sends out mixed messages: "Don't mess with this.
Oh, by the way, it's plain text now to make it easier for you to edit."
Is there some reason other than a desire to do away with binary lumps to
make the distributed lump text?
- Added a new speakermode for Stereo + HRTF: "Headphones". This is the only
way to get the HRTF low pass filter effect now.
- Fixed: No more than one sector could make noise at once.
- Trying out sound without varying priorities again.
- Fixed: Need to use setSpeakerMix to let 2D sounds (aka streamed music) use
their full volume range.
SVN r842 (trunk)
subject to channel overriding.
- Re-added priority selection based on sound usage.
- Reduced the number of virtual channels to match the number of real
channels.
- Added customizable rolloff, including Doom's standard linear gain rolloff.
SNDINFO commands are:
$rolloff <sound> <min distance> <max distance> -- linear gain (like Doom)
$rolloff <sound> linear <min distance> <max distance> -- linear volume
$rolloff <sound> log <min distance> <rolloff factor> -- logarithmic
$rolloff <sound> custom <min distance> <max distance> -- use SNDCURVE lump
Anything closer than min distance is full volume and anything further than
max distance is inaudible. Logarithmic rolloff does not have a maximum
distance; it has a scalar that controls how quickly the volume drops off
instead.
SVN r834 (trunk)
- Fixed: Heretic linetype translations included the wrong file.
- Removed all 2D sound positioning code from s_sound.cpp. Everything uses
FMOD's 3D engine now.
- Removed all the channel selection code from s_sound.cpp. FMOD has code to
handle this sort of thing, so let's use it.
- Replaced S_StopSoundID() with S_CheckSingular(). There is no longer a limit
on the number of copies of a particular sound that can be playing at once,
aside from Strife's special singular sounds. (Sorry, Heretic and Hexen.)
Consequently, the SNDINFO $limit command is now ignored.
- Removed ATTN_SURROUND, since FMOD Ex doesn't exactly support it, and it
only worked as intended on stereo speakers anyway.
- Cleaned out ancient crud from i_sound.cpp.
SVN r826 (trunk)
- Added a cheap pitch shifting for underwater environments that should be fairly
close to Duke's. It sounds okay for some sounds, but others like the BFG, where
the timing of the sound actually matters, don't sound good. I shall have to
replace it with a real pitch shifter DSP unit.
SVN r819 (trunk)
list, it should just be ignored during the propagation stage.
- After sleeping on it and realizing what was really going in, I generalized
the inventory fix from the 13th: The actor is flagged by Destroy(), then it
is later inserted into the thinker list by DThinker::SerializeAll(). So
rather than unlinking the skipped player from their inventory, just make
sure any flagged thinkers aren't inserted into a list.
- Fixed: FCanvasTextureInfo::Viewpoint needed a read barrier, and the whole
list should serve as a root.
- Reimplemented SPC playback as a custom codec for FMOD.
- Removed spc_frequency, because snes_spc only supports the SPC's native
frequency of 32000 Hz.
SVN r806 (trunk)
spc_amp from a x.4 fixed point number to a normal float.
- Switched SPC playback from the external SNESAPU.DLL to Blargg's LGPL
snes_spc library. I've compiled it with the fast DSP rather than the
highly accurate one, since I didn't notice a meaningful difference between
the two in my limited testing. In short: SPC playback is now built in to
ZDoom. You don't need to download anything extra to make it work, and it
also works on Linux as well as Windows (though building with Linux is
currently untested).
- Fixed: Stereo separation was calculated very wrongly when in 2D sound mode.
SVN r794 (trunk)
that explicitly for 2D sounds in 3D mode.
- Fixed: I had forgotten to actually set the head relative flag for 2D sounds
played in 3D.
- Fixed: Reverb was applied to digital music in software 3D mode.
SVN r793 (trunk)
for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update
your SDKs. GCC users, be sure to do a "make cleandep && make clean" before
building, or you will likely get inexplicable errors.
- Fixed: If you wanted to make cleandep with MinGW, you had to specifically
specify Makefile.mingw as the makefile to use.
- Added a normalizer to the OPL synth. It helped bring up the volume a little,
but not nearly as much as I would have liked.
- Removed MIDI Mapper references. It doesn't work with the stream API, and
it doesn't really exist on NT kernels, either.
- Reworked music volume: Except for MIDI, all music volume is controlled
through GSnd and not at the individual song level.
- Removed the mididevice global variable.
- Removed snd_midivolume. Now that all music uses a linear volume scale,
there's no need for two separate music volume controls.
- Increased snd_samplerate default up to 48000.
- Added snd_format, defaulting to "PCM-16".
- Added snd_speakermode, defaulting to "Auto".
- Replaced snd_fpu with snd_resampler, defaulting to "Linear".
- Bumped the snd_channels default up from a pitiful 12 to 32.
- Changed snd_3d default to true. The new cvar snd_hw3d determines if
hardware 3D support is used and default to false.
- Removed the libFLAC source, since FMOD Ex has native FLAC support.
- Removed the altsound code, since it was terribly gimped in comparison to
the FMOD code. It's original purpose was to have been as a springboard for
writing a non-FMOD sound system for Unix-y systems, but that never
happened.
- Finished preliminary FMOD Ex support.
SVN r789 (trunk)
it seems to have a working volume control.
- Renamed music_midi_stream.cpp to music_midi_base.cpp.
- Moved the WinMM MIDI code into a new container class.
SVN r787 (trunk)
class so they all the low-level details of MIDI streaming are kept in
one place.
- Converted the SMF MIDI playback to use the same MIDI streams as MUS
playback.
- Moved MUS playback back into its own thread so that it can continue
uninterrupted if the main thread is too busy to service it in a timely
manner.
- Fixed: The MEVT_* values are not defined shifted into their spot for a
MIDIEVENT, so I need to do it myself.
- Fixed: Pausing a MUS and the changing snd_midivolume caused the paused
notes to become audible.
SVN r784 (trunk)
of ZDoom, except now the entire song isn't prebuffered in large chunks, so
I can insert MIDI events into the playback with fairly low latency. This
should offer more precise timing than the combination of low-level MIDI and
WaitForSingleObject timeouts.
SVN r783 (trunk)
high to pass through two-sided lines, but not ones that were too low.
- Fixed: SBARINFO couldn't detect the extreme death damage type for the
player face animation.
SVN r782 (trunk)
- reverted removal of AddPatch call in crosshair initialization.
- Modified makewad.c so that it doesn't write file names with '[]^' to the dependency file. Apparenly make
can't handle these names and an incomplete list is still better than something that doesn't work at all.
SVN r719 (trunk)
installation, not the bundled copies which might not match what is installed.
- Upgraded bundled FLAC from version 1.1.2 to version 1.2.1.
SVN r575 (trunk)
- Fixed: The FMOD stream player must specify whether it wants to play the
sound looped or not when playback is started, not when the stream is created.
- Fixed: A_Saw didn't use the puff's damage type.
- Fixed: The AxeBlood's death state was using the wrong sprite frame.
- Fixed: The Mancubus had an attack sound defined even though it shouldn't.
SVN r565 (trunk)
from the wrong variable in a few places resulting in incorrect calculations.
- Fixed: MP3/OGG music always looped because the looping flag was always
set when FMOD was called to play it.
- Removed upper limit of 1 for an actor's gravity factor.
- Fixed: A_VileTarget spawned the fire at coordinate (target->x, target->x)
instead of (target->x, target->y). (Old vanilla bug.)
SVN r550 (trunk)
behind because it couldn't delete them.
- added a $MidiDevice option to SNDINFO which can either set the preferred
MIDI device for a song to Timidity or Windows' standard MIDI device.
The reason for this: About 80% of my MIDI music collection sounds better
with Timidity and the other 20% with Windows' standard synth and I'd like
to be able to use each with the one that sounds better. For MUS files you
can also force the use of OPL playback.
- added telefrag option to A_SpawnItemEx.
SVN r545 (trunk)
samples, a problem for the alternate sound renderer if it happened to be
playing any sounds at the time, since it would try to keep on playing them.
SVN r483 (trunk)
from the renderer in case the camera changed position or direction since
the last time it was looked through. Otherwise, the renderer will
interpolate from its previous view for one frame when it is switched to.
- Fixed non-POD parameter passing for GCC introduced in the previous commit.
SVN r476 (trunk)
warnings. At first, I was going to try and clean them all up. Then I decided
that was a worthless cause and went about just acting on the ones that
might actually be helpful:
C4189 (local variable is initialized but not referenced)
C4702 (unreachable code)
C4512 (assignment operator could not be generated)
SVN r420 (trunk)
be surprised if it doesn't work.
- Reorganized the network startup loops so now they are event driven. There is
a single function that gets called to drive it, and it uses callbacks to
perform the different stages of the synchronization. This lets me have a nice,
responsive abort button instead of the previous unannounced hit-escape-to-
abort behavior, and I think the rearranged code is slightly easier to
understand too.
- Increased the number of bytes for version info during D_ArbitrateNetStart(),
in preparation for the day when NETGAMEVERSION requires more than one byte.
- I noticed an issue with Vista RC1 and the new fatal error setup. Even after
releasing a DirectDraw or Direct3D interface, the DWM can still use the
last image drawn using them when it composites the window. It doesn't always
do it but it does often enough that it is a real problem. At this point, I
don't know if it's a problem with the release version of Vista or not.
After messing around, I discovered the problem was caused by ~Win32Video()
hiding the window and then having it immediately shown soon after. The DWM
kept an image of the window to do the transition effect with, and then when
it didn't get a chance to do the transition, it didn't properly forget about
its saved image and kept plastering it on top of everything else
underneath.
- Added a network synchronization panel to the window during netgame startup.
- Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL.
Otherwise, classic DECORATE definitions generate a big, fat crash.
- Resurrected the R_Init progress bar, now as a standard Windows control.
- Removed the sound failure dialog. The FMOD setup already defaulted to no
sound if initialization failed, so this only applies when snd_output is set
to "alternate" which now also falls back to no sound. In addition, it wasn't
working right, and I didn't feel like fixing it for the probably 0% of users
it affected.
- Fixed: The edit control used for logging output added text in reverse order
on Win9x.
- Went back to the roots and made graphics initialization one of the last
things to happen during setup. Now the startup text is visible again. More
importantly, the main window is no longer created invisible, which seems
to cause trouble with it not always appearing in the taskbar. The fatal
error dialog is now also embedded in the main window instead of being a
separate modal dialog, so you can play with the log window to see any
problems that might be reported there.
Rather than completely restoring the original startup order, I tried to
keep things as close to the way they were with early graphics startup. In
particular, V_Init() now creates a dummy screen so that things that need
screen dimensions can get them. It gets replaced by the real screen later
in I_InitGraphics(). Will need to check this under Linux to make sure it
didn't cause any problems there.
- Removed the following stubs that just called functions in Video:
- I_StartModeIterator()
- I_NextMode()
- I_DisplayType()
I_FullscreenChanged() was also removed, and a new fullscreen parameter
was added to IVideo::StartModeIterator(), since that's all it controlled.
- Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's
initialized post-1.22.
SVN r416 (trunk)
Randy Heit
Christoph Oelckers