- replaced some uses of FRACUNIT with OPAQUE when it was about translucency.
- simplified some overly complicated translucency multiplications in the SBARINFO code.
- some consolidation in p_map.cpp. PIT_CheckLine and PIT_FindFloorCeiling had quite a bit of redundancy which has been merged.
- čontinued work on FMultiBlockLinesIterator. It's still not completely finished.
- This might have been added in an effort to fix problems caused by mixing inclusive
and exclusive right edges. It might not be needed anymore. Let's find out...
- did some cleanup on the portal interface on linedefs: All checks should go through isLinePortal (gameplay related) and isVisualPortal (renderer related) which then can decide on the actual data what to return.
- removed portal_passive because it won't survive the upcoming refactoring.
- removed all direct access to portal members of line_t.
- always use the precise (and fast) version of P_PointOnLineSide inside the renderer.
- The original Doom renderer was inclusive for all right edges. This was
fine for the wonky projection it did. This was not fine for a standard
perspective divide, so I had to change walls to be right-edge exclusive
when I changed the projection. I only touched what was needed. Until
now. The right edge is always exclusive now, which should prevent any
more bugs related to mixing the two clusivities incorrectly.
- Renamed the 'noabsolute' parameter in side_t::GetLightLevel to 'is3dlight', what it actually is, to avoid the confusion that caused the abovementioned error.
- fixed: The Down2Up render path for sides of 3D floors had the 'is3dlight' check inverted.
This wants `curline->sidedef`, which is the 3D sidedef currently being
drawn. `sidedef` appears to be the last regular sidedef that happened
to be drawn? The perils of globals.
because they're kind of a pain to type when all uppercase.
- Also, make its sx1 and sx2 members shorts, so it takes less space, since
it's getting crammed into a vissprite now.
- This still doesn't use all the sprite properties correctly. It also
looks like they're going to need different code to build the clipping
arrays. But at least wall sprites are drawn at the proper angle now!
- R_AddLine() and R_RenderDecal() had nearly identical code for setting up
texture mapping. These have now been spun off into methods of
FWallCoords and FWallTmapVals.
the camera is on. Mostly, this means testing the distance of the camera to the plane rather
than computing the plane's Z at the camera and comparing that with the camera's Z.
SVN r4220 (trunk)
because it was an extension of the normal wall clipping process. Since a stacked sector
above you doesn't draw a floor, it wouldn't clip any midtextures to the floor either.
R_RenderMaskedSegRange() now checks this directly when rendering inside a stacked sector.
SVN r3647 (trunk)
of its clipping information before it was drawn. (On the other hand, I have no idea what this
ds->bkup and refreshing stuff is about, so I might have broken something somewhere else.)
SVN r3602 (trunk)
be used when for walls and floors when the renderer is paletted. The format
is very simple:
rgbtex1 paltex1
rgbtex2 paltex2
...
The first texture is the one to be used normally, and the second is the one
to be used in paletted modes.
The vid_nopalsubstitutions cvar can be used to ignore this lump.
SVN r3311 (trunk)
ignored the Y locations of patches drawn on two-sided midtextures and always drew them at the
top of the texture. Added a compatibility flag.
SVN r3205 (trunk)
* Added new cvar, r_3dfloors for testing, so for example, you can see the FPS difference.
* ds_p->bkup is not always allocated.
* Fixed particles visible through 3D floors.
* Fixed FAKE3D flag names.
SVN r3178 (trunk)
- Fixed: When loading non-UDMF maps, things did not have their conversation field zero'ed.
- Added an assert for the FAKE3D_REFRESHCLIP case at the end of R_RenderMaskedSegRange(), because Valgrind indicates this is being run
without ds->bkup being set to something valid. I do not immediately know how this should be fixed.
SVN r3130 (trunk)
former used fistp, which is not portable across platforms, so cannot be
used in the play simulation. They were only suitable for the renderer.
xs_Float.h also has a very fast float->fixed conversion, so FLOAT2FIXED
uses that now.
(And I also learned that the FPU's round to nearest is not the rounding I
learned in grade school but actually Banker's Rounding. I had no idea.)
(Also, also, the only thing that could have made quickertoint faster than
toint was that it stored a 32-bit int. I never timed them, and I doubt in
practice there was any real difference between the two.)
- Changed atan2f to atan2. Using floats is not a win, because the result is
returned as a double on the x87 stack, which the caller then needs to cast
down to a float using fst/fld.
SVN r1990 (trunk)
may still be needed. In particular, when drawing a seg with a midtexture is
split by foreground geometry, the first drawseg generated from it will have
the correct WallSZ1,2 values, but subsequent ones will have whatever
R_RenderDecal() left behind. These values are used to calculate the upper
and lower bounds of the midtexture. (Ironically, my work to Build-ify things
had done away with these globals, but that's gone now.)
SVN r1938 (trunk)
completely ignore them, either).
- Separated light level fixing out of player_t's fixedcolormap parameter.
Using a fixed light level (e.g. PowerTorch) will no longer wipe out
colored lighting.
- Moved the blending rectangle drawing into a separate discrete stage, since
doing it while copying the 3D view window to the display now blends
underneath the weapon instead of on top of it.
- Consolidated the special colormaps into a single 2D table.
- Tweaked the special colormaps slightly to make the true color results more
closely match the paletted approximations.
- fb_d3d9_shaders.h was getting unwieldy, so I moved the shaders out of the
executable and into zdoom.pk3. Shaders are still precompiled so I don't need
to pull in a dependancy on D3DX.
- Added a few more shaders to accomodate drawing weapons with all the in-game
lighting models. These are accessed with the new DrawTexture tags
DTA_SpecialColormap and DTA_ColormapStyle.
- Player weapon sprites are now drawn using Direct3D and receive all the
benefits thereof.
SVN r1858 (trunk)
flag set, causing it to be ignored during rendering. Why this didn't cause
more trouble, I don't know.
- Fixed: The UDMF parser passed the wrong value for "default alpha" for
TranslucentLine to P_FinishLoadingLineDef().
SVN r1775 (trunk)
* scalex_top
* scaley_top
* scalex_mid
* scaley_mid
* scalex_bottom
* scalex_bottom
- Added sidedef versions of the linedef flags wrapmidtex and clipmidtex (via
UDMF; names are the same). If the flag is set on the line, it applies to
both sides. Otherwise, each side can control them individually.
SVN r1645 (trunk)
replaced it did the check at the center of the area intersected by the
sprite and the drawseg, whereas 2.0.63 only did the check at the location
of the sprite on the map.
SVN r1411 (trunk)
- fixed: The nextmap and nextsecret CCMDs need to call G_DeferedInitNew instead of G_InitNew.
- merged MAPINFO branch back into trunk.
SVN r1393 (trunk)
so that all files are included by a central one instead of compiling
each one separately. This speeds up the compilation process by 25%
when doing a complete rebuild in Visual C.
- Cleaned up more header dependencies.
SVN r1226 (trunk)
- Fixed: The smoothlighting code in side_t::GetLightLevel relied on
the global 'linedef' variable for automatic fake contrast although
this issue had already been fixed for the original code here.
- Replaced static string buffers with FString in FONTDEFS parser.
SVN r1194 (trunk)
that animated icons can be done with it.
- Changed FImageCollection to use a TArray to hold its data.
- Fixed: SetChanHeadSettings did an assignment instead of comparing
the channel ID witg CHAN_CEILING.
- Changed sound sequence names for animated doors to FNames.
- Automatically fixed: DCeiling didn't properly serialize its texture id.
- Replaced integers as texture ID representation with a specific new type
to track down all potentially incorrect uses and remaining WORDs used
for texture IDs so that more than 32767 or 65535 textures can be defined.
SVN r1036 (trunk)
- Grouped the sector plane texture transformation options into a separate
structure and replaced all access to them with wrapper functions.
SVN r1033 (trunk)
were doing some things in their destructor that needed to be done in the
Destroy method.
- Rewrote the interpolation code. Interpolations are no longer some objects
that are separate from the rest of the engine. Instead, they are owned by
the thinkers starting them. Also, polyobjects only spawn a single interpolation
for each polyobject instead of a single one for each vertex.
Also, different types of interpolation objects are used for different types
of interpolation so that they can do some additional work if eventually needed.
SVN r1018 (trunk)
texture definitions. HIRESTEX is still supported but deprecated.
- Removed all 16 bit values from texture manager.
- Changed: The texture manager now sorts all textures for a WAD by type
to avoid priority issues with HIRESTEX defined textures.
- Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is
always the same for both sides of a linedef. This also makes handling
this in the UDMF parser easier because the linedef parsing function does
not need to access the sidedef data.
- Added new ZDoom specific UDMF linedef and sidedef properties to map parser.
- Added new ZDoom specific UDMF sector properties to map parser.
- Added class definitions for new interpolators that are better
equipped to interact with the interpolated objects.
- Separated interpolation code into its own file r_interpolate.cpp.
- Added some simple customization options to the end game screens.
- Fixed: Polyobject detection in the internal node builder did not work
anymore due to some code rearrangement for UDMF map loading. To keep
it compatible between all map formats the THINGS lump of binary format
maps must be loaded before building the nodes. This also means that
the spawning itself can be done in the same function for all map types
(except Build) now.
- Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse
which is more what would be expected from this option.
- Fixed: Weapons and ammo items that were modified by Dehacked gave full
ammo when being dropped by monsters. To properly handle this the
handling of spawning Dehacked modified pickups was changed to use
the DECORATE replacement feature instead of hacking the spawn state
of the original item and calling a spawn function from there.
SVN r1001 (trunk)
automatic fake contrast.
- Changed: Fake contrast now uses the WALLF_AUTOCONTRAST globally instead
of manipulating the sides' light values individually. This allows changing
the fake contrast at run time and also allows adding individual relative
lighting on top of it which is a planned UDMF feature.
SVN r991 (trunk)
of all types on the same linedef. Also added a 'first side only' flag. This
is not usable from Hexen or Doom format maps though but in preparation of
the UDMF format discussed here:
http://www.doomworld.com/vb/source-ports/43145-udmf-v0-99-specification-draft-aka-textmap/
- Changed linedef's alpha property from a byte to fixed point after seeing that
255 wasn't handled to be fully opaque.
- fixed a GCC warning in fmodsound.cpp
SVN r954 (trunk)
from a savegame.
- Fixed: side_t::StopInterpolation called setinterpolation instead of
stopinterpolation. Also moved the clearinterpolation call in
P_SetupLevel after the P_FreeLevelData to make absolutely sure that
nothing in there can leave an interpolator behind by accident.
- Applied Linux fixes by Jim.
SBARINFO update by Blzut3:
- Fixed: the playerclass command needed a null pointer check to prevent
crashing on respawn.
- Fixed: Mug Shot states were not reset on respawn.
- Removed keepoffsets flag since apparently it was keeping the offsets by
default. The means that the only thing not affected by the offsets was using
nullimage as a background. Since I wasn't able to get a result I liked I'm
going to say that if you want a black background with high res positioning
you will have to create your own bar image. Maybe I'll fix it some other
time.
- Added: monospacefonts variable which allows for all of the fonts to be
monospaced by a specified character (from their fontset of corse).
- Made SBarInfo recognize the bar names for the Strife popups but they don't
do anything beyond that. The names are: popuplog, popupkeys, and popupstatus.
- Started converting the drawing routine to be more flexable towards high
resolution status bars. (Only did one call so far.)
SVN r835 (trunk)
Since it uses fixed point parameters it can only be used in scripts though.
- Added flags parameters to all wall scroller specials that didn't use
all 5 args.
- Separated scrolling of the 3 different texture parts of a sidedef.
While doing this I did some more restructuring of the sidedef structure
and changed it so that all state changes to sidedefs that affect rendering
have to be made with access functions. This is not of much use to the
software renderer but it allows far easier caching of rendering data
for OpenGL because the only place I need to check is in the access functions.
SVN r832 (trunk)
