- Added filter and species parameter.
- Added new flags: RGF_INCLUSIVE, RGF_ITEMS, RGF_KILLED, RGF_EXFILTER, RGF_EXSPECIES, and RGF_EITHER.
- RGF_ITEMS: Items can receive inventory.
- RGF_KILLED: Actors who are truly dead might not be corpses, and vice versa.
- RGF_EXFILTER: Blacklists the specified actor filter. All but the filtered actor can receive the item.
- RGF_EXSPECIES: Blacklists the specified species. All but the filtered species can receive the item.
- RGF_EITHER: The actor can receive the item if it satisfies either the filter or the species. Only useful when both are used.
- RGF_INCLUSIVE: An actor marked as more than one pointer to the calling actor can ignore the exclusion pointers, but only if at least one is missing. I.e. an actor who is a target and tracer of the calling actor can still receive the item, if the calling actor doesn't pass RGF_NOTARGET and NOTRACER at the same time. RGF_INCLUSIVE only works with the pointer filtering flags. By default, if not specified, the actor will not be loopholed the item if they are under any one of the three filters.
- Fixed discrepancies and dependencies upon several flags and actor conditions which caused the function to fail.
- Overrides the NOTELEPORT flag so actors with velocity don't need to disable it in order to perform A_Teleport, which could be screwed up by a teleporting line or sudden ACS interference.
- Ensure that the result is set to false if it fails prematurely. Wasn't sure if this was needed, but with the upcoming if/else statements, better safe than sorry.
- (int ptr = AAPTR_TARGET, state high, state low, float offsethigh = 0, float offsetlow = 0, bool includeHeight = true)
- Jumps if the pointer of the calling actor is higher or lower than itself, adding offsethigh or offsetlow depending on the circumstance.
- includeHeight works twofold.
- Includes the height of the calling actor if the pointer is higher to truly determine if they are completely above them or not.
- Includes the height of the pointer if the pointer is lower.
- Disable it to only check z differences without adding height.
- Fixed: P_MoveThing had source and destination fog spawning backwards.
- Fixed a case where the NOTELEPORT flag would be ignored on A_Teleport.
- Added pointer selection to A_Teleport. Defaults to AAPTR_DEFAULT (calling actor). State jumps will only be done by the calling actor.
* Changed the behavior of SetActorTeleFog.
- Don't force "null" to resolve to no actor since "none" is already defined as NULL (via FindClass). (This change also applies to the decorate properties.)
- Passing an empty actor name will keep the existing fog since there's otherwise no way set only one fog. Since "none" works to remove the fog, I see no reason not to have this option.
- Squashed commit of the following:
commit bc45fe3263d34ef5f746f524687999c19bf7b779
Author: Randy Heit <rheit@users.noreply.github.com>
Date: Sun Mar 1 18:51:05 2015 -0600
wave scale -> wave speed
commit ff96388b128c724c1198757bfa52f1935a263356
Author: Randy Heit <rheit@users.noreply.github.com>
Date: Sun Mar 1 18:45:32 2015 -0600
More sine quake fixes
commit 2a89749a6fe6d271b9fbdc218779f680afcf4cb6
Merge: 719dfbe 5456074
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sat Feb 28 20:37:22 2015 -0600
Added QF_WAVE to A_QuakeEx.
- Changes the random quakes into a sine wave (see Shadow Warrior/Rise of the Triad reboots, Hard Reset, etc.)
- Added 3 properties to control waves per second along each individual axis. Only works with QF_WAVE.
- Intensity X/Y/Z property becomes the amplitude of the wave.
- Stacks with regular quakes, allowing shaking along the camera which must be called using A_QuakeEx WITHOUT the flag, or the other quaking functions.
- Uses the youngest quake's time for positioning.
commit 54560741581e8d15cc7060e8e068cf85e9a4b432
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sat Feb 28 20:21:19 2015 -0600
Recommitted recommended changes by Randi, with some modifications. Now, we should be finished!
commit 6f4473013411686d88fc185bdc1cc58b1035b0f1
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sat Feb 28 12:52:57 2015 -0600
Finish this revert.
commit 467e53f9400f588a2ada9b32e7634cb1f4ad5066
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sat Feb 28 12:46:02 2015 -0600
Reverted back to what was working.
commit da9de56a67efda08036e481fd5fccd5392ce6810
Author: MajorCooke <paul.growney22@gmail.com>
Date: Thu Feb 26 18:53:20 2015 -0600
Forgot this bit, for testing.
commit c5093d9bb97caf8478cefc32abc56a036feeea58
Author: MajorCooke <paul.growney22@gmail.com>
Date: Thu Feb 26 18:52:46 2015 -0600
Some more progress, but...
- This did not solve anything. In fact, it did the opposite -- completely broke wave quakes. Now they only happen whenever a random quake is in progress.
- Left in the commented code on purpose so Randi can test it.
commit 7e526405d2127cbb279f66008c8f8e55a5d497f3
Author: MajorCooke <paul.growney22@gmail.com>
Date: Wed Feb 25 17:50:42 2015 -0600
- Use newest waveform timer, not oldest.
commit 1356443609dbc6c7f46e081d0846816dc0836124
Author: MajorCooke <paul.growney22@gmail.com>
Date: Wed Feb 25 17:32:09 2015 -0600
- Got regular quakes to multiply onto sine quakes, but the vice versa needs fixing too.
commit d95796c94c70cd0229d4a6d30f69e3a7568b9588
Author: MajorCooke <paul.growney22@gmail.com>
Date: Wed Feb 25 16:46:21 2015 -0600
- Last hurdle. Now just need to figure out how to properly scale up and down.
commit 4bc3458e689155ce72c09776604d9eb4fa73d8be
Author: MajorCooke <paul.growney22@gmail.com>
Date: Tue Feb 24 23:18:03 2015 -0600
- Fixed the quakes being unstackable.
commit b51012d6d4ea065bf7f6fc9c1a0472966491f7af
Author: MajorCooke <paul.growney22@gmail.com>
Date: Mon Feb 23 23:48:34 2015 -0600
QF_WAVE renamed from SINE.
- Lots of ground covered, but still more to go.
- Still need to figure out how to make the camera properly shudder.
commit 427e4893193470bbf45415ffec70a0b69b8cccfd
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sun Feb 22 16:52:30 2015 -0600
- Begin the groundworks for QF_SINE.
- Need to figure out how to rework and manipulate the sine wave to move faster, and to allow going below 0 without breaking it too much.
- When using both scaling flags, by default, the effect only reaches half peak going either way. This forces it to go all the way to the top (or bottom if using QF_MAX) before scaling back to its original height..
- QF_SCALEUP behaves like QF_SCALEDOWN: it gradually scales the tremors, only going upwards.
- QF_SCALEUP and QF_SCALEDOWN can be combined to make an earthquake that gradually smoothes in and out.
- QF_MAX can be used to invert this behavior, where it starts at the peak of the amplitude, fades out half way, and then grows back to maximum.
- Unlocks the full potential of using quakes, including the Z axis. Each intensity applies to X/Y/Z planes whenever a player is experiencing it.
- Flags:
- QF_RELATIVE - Adjusts the quaking of the camera to go in the direction its aiming (X: forward/backward. Y: Left/right.)
- Plans for including pitch will be implemented in the future for the Z axis with relativity.
I have no idea why this was ever deemed proper - but it clearly breaks some Hexen maps and it not even remotely mimics the original behavior. Even now, it's not the same but since the items fall down they at least end up where they are supposed to be.
- ang_offset: the extra angle to apply to the actor after calculating the maximum turn.
- pitch_offset: Just like ang_offset, with pitch instead.
- FAF_BOTTOM: Aim straight for the actor's z coordinate, not with +32 units.
- FAF_MIDDLE: Aims for the direct middle of the actor.
- FAF_TOP: Aims for the very top of the actor.
- FAF_NODISTFACTOR: Use the raw pitch offset without calculating it into the distance of the aimed actor.
- The error "You cannot pass parameters to..." used the most recent token,
which was always ( and not the function name. (Note that this was
already fixed in the scripting branch, so this is probably going to be a
conflict. Meh.)
- Added A_Warp flags:
- WARPF_BOB: Gets the bob offset of actor pointer with the FLOATBOB flag.
- WARPF_MOVEPTR: The function is inversed to move the pointed actor with applied flags, but only the original caller will make the success/jump.
- Rippers will rip through anything with an equivalent ripper level, or if their level is between or on the min and max ranges.
- If no min or max is defined, it simply checks if the monster's ripper level is lower than the missiles.
- Functions: A_SetRipperLevel(int level), A_SetRipMin(int min), A_SetRipMax(int max)
- Properties: RipperLevel, RipLevelMin, and RipLevelMax.
- RipperLevel: Applicable to monsters and projectiles.
- RipLevelMin and RipLevelMax are only useful on monsters.
- By default, all are 0.
- Do a filter and species check first to save time.
- Added DMSS/KILS/RMVF_EITHER, which means if the actor is of type or species, it counts.
- A_DamageTarget(20,"Normal",DMSS_EITHER,"DoomImp","CyberdemonSpecies")
- This affects actor DoomImp, and anything that's of species CyberdemonSpecies.
- Added a little more documentation via comments.
- Added two more flags for each of the functions, EXFILTER and EXSPECIES.
- Stands for "exclude filter/species" and makes the function not take them into account.
- Cleaned up the code and placed all the checking in their own subfunctions.
- The wiki said the minimum distance to teleport defaults to 0, actor.txt on the other hand said otherwise. I was wondering why it was still broken somewhat...
- Prevent stickiness from happening, a.k.a. getting stuck in ceiling or floor and letting the engine unstick the actor. This caused velocity loss.
