This is to improve compile times because the MSVC compiler tends to become slow with large lists of source files in a single project.
This new project is still our stripped down copy of libadl, not the original, because that project contains a large amount of baggage we do not need.
Precompilation of prefix header for GCC and Clang requires some efforts thanks to CMake which doesn't support this feature out of the box
Existing thirparty solutions must be tuned to our needs, and our configuration should be adjusted to a chosen module
Magnification filter is applied to swapchain image when it's copied to a physical display surface
This is needed for gfx-portability because MoltenVK uses nearest sampling by default
Rendering bits got restructured and the SSE_MATTERS paths were not updated
to reflect that. A 32-bit build with clang subsequently complaints as the
files in question are not compiled with -mmmx.
Since Google can export this as well it makes a lot more sense here because it is a textual format better suited for version control and does not carry along all the formatting baggage that isn't needed for a string table.
Dynamic libraries placed in the directory with the main executable now can be loaded by dlopen() function
This is required in order to enable Vulkan support without additional steps like SDK installed in the system
These were pixel format conversion routines used in the D3D backend. Nothing in here is needed anymore - the FBitmap class offers much of the functionality covered here in a far more concise and approachable manner.
Two files were split:
g_level.h contained both the game data definitions and some prototypes belonging to the game logic. These were split up.
decallib.cpp contained both the data and the animation thinkers. The thinkers are now in their own file.
This is supposed to be come the place where all pure play code should be placed, but for that all CVARs and CCMDs and other things that do not directly handle play data should be taken out to make code reviewing easier. These now get collected in two separate files, g_cvars.cpp and g_dumpinfo.cpp respectively.
The sole ZScript property in here has also been moved - to thingdef_properties.cpp.
backtrace functions are not present in all libc implementations. Cmake has
module to add external libraries into build if needed so use it to fix build on
Unix systems without backtrace in libc.
* split up FMultiPatchTexture into a builder class and the actual image source.
* since images can now be referenced by multiple textures the old redirection mechanism has been removed. It can be done better and less intrusive now. Simple single patch textures already directly reference the underlying patch image now.
* allocate all image source related data from a memory arena. Since this is all static this makes it a lot easier to free this in bulk.
This class has only meaning for software-based warping so it doesn't have to be a part of the FTexture hierarchy.
Making it a subclass of FSoftwareTexture is fully sufficient.
A section is a continuous part of a sector or in some case of several nearby continuous parts. For sectors with far away parts multiple sections will be created, especially when they lie in disjoint parts of the map.
This is mainly supposed to cut down on time for linking dynamic lights. Since they need to traverse subsectors to find all touching sidedefs a more coarse data structure that only contains the info needed for this is more suitable. In particular, this does not contain any intra-sector lines, i.e. those with both sides in the same sector.
The original idea was to let Vulkan do this completely differently, but if that comes to pass it should be done without having generic data maintenance code on the API side.
Added full-panning stereo, improvement of channel management, and many other things.
Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes.
To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback.
ADLMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Fixed correctness of CMF files playing
* Fixed unnecessary overuse of chip channels by blank notes
* Added API to disable specific MIDI tracks or play one of MIDI tracks solo
* Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits.
* Added working implementation of TMB's velocity offset
* Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!)
* Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip
OPNMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels
* Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis
* Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip
* Added support for full-panning stereo option
ADL&OPN Hotfix: re-calculated default banks
The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
What works:
- Parsing the model
- Constructing geometry (surfaces) for triangulated models
What doesn't:
- Rendering the model
- Building the vertex buffer
- Triangulating quads
This was done because the backdrop as implemented was the only texture in the entire game that had to be deleted and recreated each frame.
However, with Vulkan this would have necessitated quite a bit of synchronization with the render pipeline which wasn't really feasible just for this one single texture.
Now the texture manager can assume that once a texture was created it will be immutable and never has to change.
Ultimately all this needs is a small data table describing the geometric properties of each mode and a single Present function that calls the mode specific variants.
Code size got reduced from 50kb to less than 20kb with proper separation of the generic parts from the OpenGL parts.
Added ability to switch emulator and it's accuracy level ("enabling of 'run at PCM rate' reduces accuracy, and also reduces CPU usage")
Added draft code for future external banks support (WOPL format for ADLMIDI and WOPN format for OPNMIDI)
ADLMIDI 1.3.3 2018-06-19
* Fixed an inability to load another custom bank without of library re-initialization
* Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Fixed incorrect 4-op counter which is still catch 4-op instruments on 2-op banks
* Fixed an incorrect processing of auto-flags
* Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event
* Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME!
* Updated DosBox OPL3 emulator up to r4111 of official DosBox trunk (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* The automatical choosing of 4 operator channels count has been improved (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
ADLMIDI 1.3.2 2018-04-24
* Added ability to disable MUS and XMI converters
* Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins.
* Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank).
* Added support for real-time switching the emulator
* Added support for CC-120 - "All sound off" on the MIDI channel
* Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept.
* Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
OPNMIDI 1.3.0 2018-06-19
* Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event
* Fixed an incorrect processing of auto-flags
* MAME YM2612 now results a more accurate sound as internal using of native sample rate makes more correct sound generation
* Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME!
* Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
OPNMIDI 1.2.0 2018-04-24
* Added ability to disable MUS and XMI converters
* Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins.
* Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank).
* Added support for real-time switching the emulator
* Added support for MAME YM2612 Emulator
* Added support for CC-120 - "All sound off" on the MIDI channel
* Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept.
* Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
Like Linux and macOS this will only support borderless fullscreen in the active desktop resolution now, which is what modern systems need.
The list of discrete resolutions has been removed as it makes no sense anymore with a fixed video mode - all the other scaling options remain active, though.
These files are not part of the actual renderer but part of the system code.
This means, for separated modern and legacy GL renderers, there still will only be one set of this, unlike everything else.
(concatenated "UMSH" signature + datafile + anivfile)
This is pretty much 100% functional by now.
Hasn't been tested on platforms other than Linux yet, though.
Code definitely deserves some cleaning.
* split gl_shadowmap.cpp into a GL dependent and an API independent part.
* gl_drawinfo must be kept around for the HUD sprite because it connects the renderer with the hardware indpendent part of the engine.
