In ai_checkattack() is a check against AI_SOUND_TARGET. If the player
made a noice and the the monster noticed this noise it's true. If
that noice was more than 5 seconds ago the monster forgets that event
and continues with it's search for the player. Otherwise it informs
the surrounding monsters that something interesting has happened and
then returns false. So the problem is: Even if the monster heard the
player and can see him, it aborts at this point.
Fix this by adding an additional visibility check. Do the sound
checking only if the player is not visible, otherwise just continue.
This was reported by shoober420 and debbuged by maraakate. This fix
was DanielGibons idea. This commit fixes issue #162.
I don't think that this has any visible effect, but it's saver than
assume that in multiplayer all clients enter the intermission at the
same time. This was reported by maraakate in yquake2 issue #160.
Until now autoexec.cfg was a special case. It was read several
times, whenever the 'game' cvar was altered or when the client was
restarted. But only if it was in the right directory in the right
position of the internal search path... Remove this altogether and
replace it by an ordinary 'exec autoexec.cfg' at startup.
This may break some mods that depend on an autoexec.cfg if the user has
his own version in ~/.yq2/. Such mods should use default.cfg instead.
This closes issue #163.
Multitexturing was never part of any official Quake II release. It was
added in version 3.21, which was released only in source. Over the years
many developers tried to fix multitexturing, including myself. Yamagi
Quake II had it even enabled by default for several releases... But:
* Multitexturing is poorly implemented and **slow**
* Multitexturing leads to render errors, for example in city3
* Multitextring is ortogonal to the normal render path and adds a
lot of special cases to the renderer
Remove it for good. Ciao, it wasn't a nice time. :) The last version
before this commit was at least somewhat fixed, read some of the worst
problems were fixed. If someone's ever going to resurrect it, it would
be a good idea to start at that point.
In baseq2 there's no need to force a certain damage texture on gunners
since there's only one. Also gunners can't wear the powershield so
there's no need to turn it of.
This was noticed by Maraakate.
Otherwise at least one key may be still marked as down causing an
immediate abort of playback. While here be a little bit paranoid
and clean up key states when focus is gained. In theory that's a
no-op.
When the video is scaled through OpenGL we can just throw it on our
vertexes and everything's alright. But when we're softscaling the video
we must consider that the videos size doesn't really match the vertex
size...
especially in the intermission videos, the text looked broken, as parts
of the characters were missing.
This is because Draw_StretchRaw() converts the 320x240 video frame into
a 256x256 texture, without doing proper interpolation (just skipping
some pixels instead).
Now, if the GPU supports non-power-of-two texture sizes, the video
frames are uploaded as textures in their original size.
(Also fixed a harmless typo in common.h)
This crash was found by DanielGibson, he even guessed the right fix
without having a usable coredump. ;) In boss1.bsp Macron is waiting for
the player, despawning as soon as the player moves to him. After that
the player needs to press 2 buttons, each button triggers 3 flyers. If
the player is fast enough, the first bunch of flyers may spawn before
macron is despawned. Now there's a small chance that a flyer decides to
attack macron... If Macron despwans at the the next frame, self->enemy
is set to NULL (Macron is gone) but nevertheless flyer_fire() is called.
The correct fix would be to call flyer_fire() before Macron despawns,
but that's hard to impossible. So take the easy route and check if
self->enemy is not NULL.
This bug was "fixed" by id with removing two lines in the ground entity
check. When cleaning up the game I added them back... I don't know if
it's really correct to just remove them, but let's try it. This fixes
issue #157.
The old implementation had two problems:
* OSTYPE and ARCH are systemwide defines, overriding them may break
the global libc headers. This is a theoretical problem, I've never
seen it in praxis.
* Not all system set ARCH correctly when building in a chroot env.
For example on Linux ARCH is set to x86_64 when building in an
i386 chroot. Now the user can do something like "make YQ2ARCH=i386"
to get things right.
In lower mines you can drop a rock onto a tank by using a lever.
This was broken, the rock exploded instead of dropping, because debris
is spawned and that debris was solid.
Now the debris is not solid anymore (like it was up to
b4d16ab6b3
"Some additions to last commit:") and it works again
The original client crashed (or survived by pure luck) when muzzle
flash offsets >210 were send. Our fix was to bail out, but that broke
some buggy mods... So just return and print an optional debug message.
This fixes issue #153.
This step height is used by several evelators, leading to stuttering due
to misspredictions. Additionally half height steps weren't smoothed by
the synchronous client.
Predicting these steps leads to a heavily stuttering elevator in
hangar1. I think that steps between 94 and 98 can't appear on stairs, so
just remove them. If I'm wrong we need a hack to the hack ontop of the
hack... ^^
This fixes#119. As always I've chosen the least invasive way to solve
this problem. Trying to open players/$model/trix.md2 is hack, but solves
the problem without changes to filesystem.c and it's API.
With vsync enabled the render times of consecutive frames can diverge.
The first frame arrives right at the next display frame and is rendered
without waiting time. The next frame has to wait 20ms. The leads to some
problems with the move prediction if the client is asynchronous. Fix
this by capping the desired frame rate at the display refresh rate. Also
make sure that the network framerate is never higher then the renderer
framerate.
With the commit the timing is always correct:
* With no limit as much frames as possible are rendered. In this case
rfps > nfps and everything's good.
* With vsync enabled rfps > nfps or rfps == nfps is given. Also rfps
will never exceed the display refresh rate.
* On slow hardware either rfps > nfps or an implicit rfpc == nfps is
given.
While the bugfix in a6f4a3b made the steping prediction working for
stairs, elevators are still stuttering. r1q2s code solves this problem
and is a little bit faster. Use it instead.
Yesterday I chose setting cl_async to 0 since I saw some movement
changed with the async client enabled. Especially when clipping against
bevels the game started to stutter and there were small rendering
problems. After some debugging I realized that it is caused by slight
inaccuracies in the move prediction. When cl_maxfps is too low, the
movement error between two render frames becomes to big, leading to
misspositions. There're two ways to solve this problem:
* Processing more client frames. Most async clients I've looked on
process 60 or even 90 render frames. I chose to stay at 60 since
I was unable to see differences with higher rates.
* Changed to pmove.c and the pmove_t struct. Some multiplayer focused
clients go that way. But there's a very high of breaking singleplayer
movement and pmove_t is part of the server <-> game API. Additionally
the network code must / should be altered. So this is unsuitable for
YQ2.
Please note that there's still a change in movement. Before 4ae8706 and
when cl_async is set to 0 movement is dependend on the render framerate.
At low framerate bevel clipping isn't working too good, at high
framerates prediction causes physics changes like the famous 125hz bug.
With cl_async set to 1 the network framerate is stable, leading to a
more consistant behahiour.
Most (all?) clients implement the synchronous and the asynchronous
client by seperate code pathes. Instead of doing that we force the
asynchronous path to process one network frame for each render frame.
We're missusing the current frame to pass data from the input subsystem
to the movement prediction without a server frame. While we can use the
current frame for the movements itself, it's not finished and thus
unsuitable for stair step prediction. Also oldframe is determined
wrongly. As a result the player "jumps" over stairs.
