MAPINFO: added "DoomEdNum" and "SpawnNums" blocks support.
MAPINFO: added "#include" directive support.
MAPINFO: added "$gzdb_skip" special comment support.
DECORATE: "spawnthing" Game Configuration block is now updated using "SpawnID" actor property.
Game configurations: added "class" property to the most of ZDoom things.
Actions: removed "Reload MAPINFO" action.
Documentation: merged "GLDEFS and MODELDEF support", "(Z)MAPINFO support" and "TEXTURES support" topics into "(G)ZDoom text lumps support", added info about the other text lumps GZDB can use.
Added, Visual mode, UDMF: added "Increase Scale" and "Decrease Scale" actions.
Added, Visual mode, UDMF: "Reset Texture Offsets" action now resets scale when used on things.
Added, Visual mode, UDMF: "Reset Local Texture Offsets" action now resets scale, pitch and roll when used on things.
Changed, Visual mode, UDMF: "Reset Texture Offsets" action now only resets texture offsets (previously it also reset texture scale).
Changed, Visual mode, UDMF: "Reset Local Texture Offsets" action now resets texture offsets, scale and brightness of sidedefs and also rotation of floors/ceilings.
Changed, Visual mode, UDMF: thing box arrow now displays pitch and roll for things, which have attached model and appropriate MODELDEF flags.
Changed, Thing Edit Form, UDMF: negative pitch and roll can now be entered.
Updated documentation.
Added, Game configurations: added "thingclasshelp" property. It's used to open a website when thing class name is clicked in the Thing Edit form.
Changed, "Raise/Lower sector to nearest" action: 3d floors are now taken into account when using the action on things.
Updated documentation.
Fixed, Fit Textures action: vertical texture offset of a middle part of double-sided linedef with "Lower unpegged" flag was calculated incorrectly.
Fixed, Fit Textures action: texture offsets were calculated incorrectly when using the action on several groups of connected walls at once with "Fit across connected surfaces" enabled.
Fixed, Visual mode: middle parts of double-sided linedefs were not rendered when ScaleY was negative.
Updated ZDoom_DECORATE.cfg.
Visual mode: removed "Fit Texture's Width" and "Fit Texture's Height" actions.
Visual mode: "Auto-align texture offsets" actions were incorrectly aligning double-sided middle walls in some cases.
Visual mode: "Auto-align texture offsets" actions now align non-wrapped double-sided middle walls to vertical offset closest to their initial vertical offset.
Visual mode: middle parts of double-sided walls were ignored when Shift-selecting walls.
Nodebuilders/Game configurations: GL nodes definitions were missing from game configurations.
Nodebuilders/Game configurations: "~MAP" wildcard can now be a part of a lump name.
Nodebuilders: GL nodes were not properly handled by the editor.
Main Window: the window is now moved into the view when stored position is ouside of screen bounds.
Classic and Visual modes: changing thing pitch was ignored in some cases.
Visual mode: raising and lowering a thing with "+SPAWNCEILING" flag now works the same way as when raising/lowering a regular thing.
Visual mode: using "Raise/Lower Floor/Ceiling to adjacent sector" actions on a thing with "+SPAWNCEILING" flag now works the same way as when using them on a regular thing.
Rendering: even more fixes to MODELDEF and UDMF properties-related model rendering logic.
Internal, ResourceListEditor: rewritten resource validation check in a more OOP-ish way.
Configurations: fixed an infinite loop crash when a file was trying to include() itself.
UDMF thing flags: added Skill 6-8 to the flags list (because there are thing filters for these).
ZDoom_ACS.cfg: added definitions for SetTeleFog and SwapTeleFog.
ZDoom_DECORATE.cfg: added definitions for A_SetTeleFog and A_SwapTeleFog.
Updated ZDoom ACC.
Updated documentation.
Fixed, Texture Browser Form: well, I broke "Tab" key functionality again (in previous commit)...
Maintenance: changed curly braces style to match DB2 one (hopefully not breaking anything in the process...).
Maintenance: changed private method names casing to match DB2 one.
Visual mode: "Lower/Raise Floor/Ceiling" actions now work on surfaces with sector slopes.
Cosmetic: numeric textboxes, which support relative values, now have differently colored text and a tooltip.
Internal: renamed Sector.CeilingSlopeOffset to Sector.CeilSlopeOffset, Sector.CeilingSlope to Sector.CeilSlope to match their names with similar sector properties.
Fixed: Visual mode: "Select" action with "with the same textures" / "with the same height" modifiers (Shift/Ctrl + LMB) was not working properly when used on vavoom-type 3d floor sidedefs.
Fixed: Visual mode, UDMF, "Auto-align textures" actions: vertical texture offset was calculated incorrectly for vavoom-type 3d floors.
Visual mode: "Select" action with "with the same textures" modifier (Shift + LMB) now selects adjacent sidedefs only when their height intersects with the height of the current sidedef.
Visual mode: "Select" action with "with the same textures" modifier (Shift + LMB) was not selecting connected one-sided sidedefs when used on a sidedef without a texture.
Cosmetic: fixed a couple of action descriptions in BuilderModes' Actions.cfg.
Cosmetic: MainForm.UpdateToolStripSeparators was working incorrectly in some cases.
Cosmetic: ErrorChecksForm's title was not updated when no errors were found.
The editor will fail more gracefully when no D3D device is detected.
In some cases the editor was constantly checking D3D device availability when minimized.
Added more DX-related debug output (only in Debug builds).
Sectors mode: changed Alt-key handling. Now it only enables "snap to grid increment" mode.
Things mode: "snap to grid increment" mode now works in this mode.
Updated documentation.
Thing Edit Form, UDMF: added controls for setting pitch, roll, scale, render style, fill color, alpha, health and score.
Visual mode, UDMF: UDMF scale is now applied when rendering sprites.
Added Thing Statistics form (Edit -> View Thing Types...), which shows all loaded thing types with some additional info.
Visual mode: sprites with negative ScaleX and positive ScaleY were not rendered properly.
Classic modes: display was not updated after loading a sprite.
Current testing engine change was not saved on closing the program when no other game configuration settings were changed.
Moved "Rotate Clockwise" and "Rotate Counterclockwise" actions to "Edit" category.
Tag Statistics form: help label was incorrectly aligned.
Some actions in Sectors and Linedefs modes were not used on highlighted map elements.
Some actions in Sectors and Linedefs modes created undo groups incorrectly when used on highlighted map elements.
"Preferences -> Editing -> When splitting a linedef" setting is now always used when splitting linedefs.
"Preferences -> Editing -> When splitting a linedef": added "Reset X and Y" option.
"Preferences -> Editing -> Auto-align textures of newly created linedefs" option now works in a more intelligent fashion.
Error Checker mode: added "Check missing flats" check.
Error Checker mode: fixed several descriptions.
Sprite patches for sprites defined in TEXTURES are now loaded from Sprites namespace.
Some of my older texture alignment code didn't work properly when strict texture/flat handling ("mixtextureflats" game configuration flag set to false) was enabled.
Fixed some incorrect checks for missing texture ("-").
Draw Curve Mode: added settings panel.
Sectors mode: added "Make Door" button to the toolbar.
Swapped Side panel and Info panel z-order.
Interface: split toolbar into 3 separate toolbars. All toolbar buttons are now viewable at 1024x768.
Interface: grouped stuff in "Modes" menu a bit better.
Interface: added "Draw [stuff]" buttons to modes toolbar.
Interface: reorganized main menu. Hope it makes more sense now.
API: added General.Interface.AddModesButton() and General.Interface.AddModesMenu(), which can be used to add buttons to specific group in "Modes" toolbar and menu items to specific group in "Modes" menu, so actions, which behave like an editing mode, but are not part of one can be added there.
Draw Settings panel: added "All" buttons to "Fill Selection with Textures" and "Remove Textures form Selection" groups
Export to .obj: fixed a crash when trying to export an unsaved map.
Texture preview are now created ~25% faster.
When Draw Rectangle or Draw Ellipse mode is enabled, it's settings are now shown in side panel.
Draw Ellipse mode: increased maximum number of sides to 512.
Changed the way tags are shown in Tag Selector controls. Tags without labels are now shown as a number (not "Tag N"), and tags with label are now shown as "N (label)", not "label (N)".
Tag labels are now shown in Thing, Sector and Linedef info panels.
Once again changed the way things are rendered while dragged.
Rearranged the label in PairedIntControl and PairedFieldControl (it is now behind numeric controls).
Optimized MapSet.GetSectorByCoordinates().
Increased performance when canceling Edit mode after pasting.
"Export to Wavefront .obj" function: current selection is now converted to sectors before running the function (previously it would export selected sectors when there were sectors selected, or the whole map when no sectors were selected).
Visual mode: changed "Move Texture Left/Right/Up/Down by 8" actions to "Move Texture Left/Right/Up/Down by cur. grid size"
Visual mode: holding Ctrl-Shift while dragging texture with the mouse will snap texture offsets to current grid size.
Classic modes: interiors of highlighted sectors are now highlighted when the action target of currently highlighted map element is sector.
Unhandeled exceptions infos are now written to the event log.
Location and active tab of all Edit Forms are now stored while GZDB is running.
Focus management between editing window and the rest of the interface should work better now.
Tag Explorer plugin: editing window was not updated properly when Edit forms were opened from Tag Explorer.
Tag Explorer plugin, UDMF: comment editing was incorrectly initialized in some cases.
Sectors mode: effect and tag overlay can now be toggled separately from selection numbers.
Sectors mode: "View Tags and Effects" and "View Selection Numbering" settings are now saved to program configuration.
Sectors mode: removed "Lower Floor by 8 mp", "Raise Floor by 8 mp", "Lower Ceiling by 8 mp" and "Raise Ceiling by 8 mp" actions.
"Increase Brightness by 8" and "Decrease Brightness by 8" actions now work in Sectors mode.
Moved "Increase Brightness by 8" and "Decrease Brightness by 8" actions to "Edit" category.
"Toggle Highlight" action now works in Sectors mode.
Moved "Toggle Highlight" action to "Tools" category.
Removed Brightness mode.
Updated documentation.
Visual mode: added support for "fogdensity" and "outsidefogdensity" MAPINFO properties.
Sector Info panel now shows the number of sector's sidedefs as well as light and fade colors (UDMF only).
UDMF: Sector and sidedef flags are now copied/pasted when using "Copy Properties" and "Paste Properties" actions.
Fixed: in some cases default texture overrides were used even when corresponding option was disabled.
Sector Edit form: light and fade values were not saved when a value was pasted/entered into text box.
Sector Edit form: "reset value" button was not shown for light and fade values when selected sectors had different light/fade colors.
Reverted Open Map form changes from previous commit (my assumption that map marker is always empty was not correct...)
Updated documentation.
Snap Map Elements to Grid mode now works much faster and shows a message when completed.
Forced default textures are now only used in drawing modes.
Exception Dialog: long error descriptions were breaking window layout.
Map will no longer be shown in Open Map form if unrelated data is encountered inside of map namespace.
Textures now load up to 2x faster when "mix textures and flats" flag is set in game configuration.
TEXTUREx/TEXTURES: texture will now be created if at least one of it's patches is loaded.
Visual mode: fixed a crash when "Slope floor to here" (9500) or "Slope ceiling to here" (9501) things were not inside sector.
Fixed: flats were not loaded form wads inside Directory and PK3/PK7 resources.
Sector Info Panel, Linedef Info Panel: texture size was shown for unknown textures.
Tag Statistics form: you can now double click on Sectors, Linedefs or Things cell to select them, and right click to open their properties.
Texture size labels were displayed incorrectly in some cases.
Rewritten VerticesMode.DeleteItem() once again...
Vertex Edit form now works in realtime mode.
Vertex Edit form: ceiling and floor vertex offsets can now be cleared.
Added StairSectorBuilder plugin (I suppose some external plugins will stop working in GZDB because I've changed ButtonStep to float in ButtonsNumericTextbox a couple revisions ago...).
Preferences form: action description is now scrollable.
Changed background color of Sector Edit form.
Vertex' ZCeiling and ZFloor properties are now managed internally.
Visual mode, UDMF: renamed "Rotate Thing Clockwise" and "Rotate Thing Counterclockwise" actions to "Rotate Clockwise" and "Rotate Counterclockwise". These actions can now be used to change rotation of floor/ceiling textures.
Visual mode, UDMF: "Reset Texture Offsets" action now also resets sidedef's scale and floor/ceiling's scale and rotation.
Visual mode, UDMF: control line's OffsetX and OffsetY were not taken into account when calculating texture offsets of 3d floors' sides.
Visual mode, UDMF: fixed a ton of bugs in Auto align functions.
Visual mode, UDMF: when using "Move Texture Left/Right/Up/Down by 1" actions texture offsets were not updated properly when texture's scale was < 1.0.
Visual mode, UDMF: OffsetX and OffsetY were not taken into account in "Fit Texture Width/Height" actions.
Dockers Panel: added Pin/Unpin button, which acts the same as "Preferences -> Interface -> Side panels -> Auto hide" checkbox.
Texture size labels can now be disabled by unchecking "Preferences -> Interface -> Show texture and flat sizes in browsers" checkbox.
Texture size labels now are not shown for unknown textures.
Most of texture size labels had incorrect bg color.
ZDoom_linedefs.cfg: action specials 223 and 224 had incorrect Arg0.
Point Thing at Cursor action: action now works when used from menu, changed default shortcut to Shift-L. You can now hold Ctrl to point Things away from cursor.
Error Checks Mode: added linedef index to message text of all linedef-related errors.
UDMF: wall texture offsets are now rounded when user edits them via cursor keys or mouse dragging (because they are stored as integers anyway).
Event lines for "event activators" (ActorMover, Camera and things with Thing_SetGoal special) are now drawn with different color.
Fixed a crash when a Thing with arguments is pasted in Visual modes.
Several other small fixes.
Fixed config error in ZDoom_things.cfg.
Fixed config error in ZDoom_ACS.cfg
Things can now be rotated in visual mode.
Added JPG and TGA image format support.
Fixed: TEXTURES files with names other than "textures.ext" will now be loaded (as an example, files named like "textures.something.txt" or "textures_walls.ccp" will be loaded by (G)ZDoom, but not by Doom Builder 2 or previous versions of GZDB).
Fixed: textures defined in TEXTURES have higher priority in (G)ZDoom than images with the same name in "textures" folder.
Fixed another possible crash when MODELDEF is reloaded.
Added drawing modes to Mode menu, so they are much easier to spot now.
Warnings notify panel blinks much more noticeable when there are warnings.
UDMF Controls plugin:
3D-floor surfaces can be edited now.
Relative mode is now enabled by default.
Scale control now works properly in relative mode.
Angle control's angle indicator in now drawn properly when value is changed using numeric control.
Added "Test Map from current position" action (default shortcut is Ctrl-F9), which lets you play the game from cursor position, if you are in 2D-Mode, and from camera location if you are in Visual Mode.
Added "Sync camera position between 2D and 3D modes" (found in Preferences -> Interface -> Options), which automatically centers 2D-mode on camera position when you leave Visual Mode, and places camera at cursor position when you toggle from 2D-mode to Visual Mode (unless you have Visual Mode camera thing in your map).
Several improvements in Draw Rectangle and Draw Ellipse modes: added info label with current bevel amount and subdivision level; bevel amount now applied properly when shape size is smaller than it.
